- 02 Dec, 2022 17 commits
-
-
Sebastian Andrzej Siewior authored
Due to the hashed-MAC optimisation one problem become visible: hsr_handle_sup_frame() walks over the list of available nodes and merges two node entries into one if based on the information in the supervision both MAC addresses belong to one node. The list-walk happens on a RCU protected list and delete operation happens under a lock. If the supervision arrives on both slave interfaces at the same time then this delete operation can occur simultaneously on two CPUs. The result is the first-CPU deletes the from the list and the second CPUs BUGs while attempting to dereference a poisoned list-entry. This happens more likely with the optimisation because a new node for the mac_B entry is created once a packet has been received and removed (merged) once the supervision frame has been received. Avoid removing/ cleaning up a hsr_node twice by adding a `removed' field which is set to true after the removal and checked before the removal. Fixes: f266a683 ("net/hsr: Better frame dispatch") Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Sebastian Andrzej Siewior authored
hsr_forward_skb() a skb and keeps information in an on-stack hsr_frame_info. hsr_get_node() assigns hsr_frame_info::node_src which is from a RCU list. This pointer is used later in hsr_forward_do(). I don't see a reason why this pointer can't vanish midway since there is no guarantee that hsr_forward_skb() is invoked from an RCU read section. Use rcu_read_lock() to protect hsr_frame_info::node_src from its assignment until it is no longer used. Fixes: f266a683 ("net/hsr: Better frame dispatch") Signed-off-by:
-
Sebastian Andrzej Siewior authored
The hlist optimisation (which not only uses hlist_head instead of list_head but also splits hsr_priv::node_db into an array of 256 slots) does not consider the "node merge": Upon starting the hsr network (with three nodes) a packet that is sent from node1 to node3 will also be sent from node1 to node2 and then forwarded to node3. As a result node3 will receive 2 packets because it is not able to filter out the duplicate. Each packet received will create a new struct hsr_node with macaddress_A only set the MAC address it received from (the two MAC addesses from node1). At some point (early in the process) two supervision frames will be received from node1. They will be processed by hsr_handle_sup_frame() and one frame will leave early ("Node has already been merged") and does nothing. The other frame will be merged as portB and have its MAC address written to macaddress_B and the hsr_node (that was created for it as macaddress_A) will be removed. From now on HSR is able to identify a duplicate because both packets sent from one node will result in the same struct hsr_node because hsr_get_node() will find the MAC address either on macaddress_A or macaddress_B. Things get tricky with the optimisation: If sender's MAC address is saved as macaddress_A then the lookup will work as usual. If the MAC address has been merged into macaddress_B of another hsr_node then the lookup won't work because it is likely that the data structure is in another bucket. This results in creating a new struct hsr_node and not recognising a possible duplicate. A way around it would be to add another hsr_node::mac_list_B and attach it to the other bucket to ensure that this hsr_node will be looked up either via macaddress_A _or_ macaddress_B. I however prefer to revert it because it sounds like an academic problem rather than real life workload plus it adds complexity. I'm not an HSR expert with what is usual size of a network but I would guess 40 to 60 nodes. With 10.000 nodes and assuming 60us for pass-through (from node to node) then it would take almost 600ms for a packet to almost wrap around which sounds a lot. Revert the hash MAC addresses optimisation. Fixes: 4acc45db ("net: hsr: use hlist_head instead of list_head for mac addresses") Cc: Juhee Kang <claudiajkang@gmail.com> Signed-off-by: -
Xin Long authored
After commit 9ed7bfc7 ("sctp: fix memory leak in sctp_stream_outq_migrate()"), sctp_sched_set_sched() is the only place calling sched->free(), and it can actually be replaced by sched->free_sid() on each stream, and yet there's already a loop to traverse all streams in sctp_sched_set_sched(). This patch adds a function sctp_sched_free_sched() where it calls sched->free_sid() for each stream to replace sched->free() calls in sctp_sched_set_sched() and then deletes the unused free member from struct sctp_sched_ops. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Link: https://lore.kernel.org/r/e10aac150aca2686cb0bd0570299ec716da5a5c0.1669849471.git.lucien.xin@gmail.comSigned-off-by:
-
Jakub Kicinski authored
Matthieu Baerts says: ==================== mptcp: PM listener events + selftests cleanup Thanks to the patch 6/11, the MPTCP path manager now sends Netlink events when MPTCP listening sockets are created and closed. The reason why it is needed is explained in the linked ticket [1]: MPTCP for Linux, when not using the in-kernel PM, depends on the userspace PM to create extra listening sockets before announcing addresses and ports. Let's call these "PM listeners". With the existing MPTCP netlink events, a userspace PM can create PM listeners at startup time, or in response to an incoming connection. Creating sockets in response to connections is not optimal: ADD_ADDRs can't be sent until the sockets are created and listen()ed, and if all connections are closed then it may not be clear to the userspace PM daemon that PM listener sockets should be cleaned up. Hence this feature request: to add MPTCP netlink events for listening socket close & create, so PM listening sockets can be managed based on application activity. [1] https://github.com/multipath-tcp/mptcp_net-next/issues/313 Selftests for these new Netlink events have been added in patches 9,11/11. The remaining patches introduce different cleanups and small improvements in MPTCP selftests to ease the maintenance and the addition of new tests. ==================== Link: https://lore.kernel.org/r/20221130140637.409926-1-matthieu.baerts@tessares.netSigned-off-by:
-
Geliang Tang authored
This patch adds test coverage for listening sockets created by the in-kernel path manager in mptcp_join.sh. It adds the listener event checking in the existing "remove single address with port" test. The output looks like this: 003 remove single address with port syn[ ok ] - synack[ ok ] - ack[ ok ] add[ ok ] - echo [ ok ] - pt [ ok ] syn[ ok ] - synack[ ok ] - ack[ ok ] syn[ ok ] - ack [ ok ] rm [ ok ] - rmsf [ ok ] invert CREATE_LISTENER 10.0.2.1:10100[ ok ] CLOSE_LISTENER 10.0.2.1:10100 [ ok ] Signed-off-by:Geliang Tang <geliang.tang@suse.com> Reviewed-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
-
Geliang Tang authored
This patch moves evts_ns1 and evts_ns2 out of do_transfer() as two global variables in mptcp_join.sh. Init them in init() and remove them in cleanup(). Add a new helper reset_with_events() to save the outputs of 'pm_nl_ctl events' command in them. And a new helper kill_events_pids() to kill pids of 'pm_nl_ctl events' command. Use these helpers in userspace pm tests. Suggested-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Geliang Tang authored
This patch adds test coverage for listening sockets created by userspace processes. It adds a new test named test_listener() and a new verifying helper verify_listener_events(). The new output looks like this: CREATE_SUBFLOW 10.0.2.2 (ns2) => 10.0.2.1 (ns1) [OK] DESTROY_SUBFLOW 10.0.2.2 (ns2) => 10.0.2.1 (ns1) [OK] MP_PRIO TX [OK] MP_PRIO RX [OK] CREATE_LISTENER 10.0.2.2:37106 [OK] CLOSE_LISTENER 10.0.2.2:37106 [OK] Signed-off-by:
-
Geliang Tang authored
This patch makes server_evts and client_evts global in userspace_pm.sh, then these two variables could be used in test_announce(), test_remove() and test_subflows(). The local variable 'evts' in these three functions then could be dropped. Also move local variable 'file' as a global one. Suggested-by:
-
Geliang Tang authored
Some userspace pm tests failed since pm listener events have been added. Now MPTCP_EVENT_LISTENER_CREATED event becomes the first item in the events list like this: type:15,family:2,sport:10006,saddr4:0.0.0.0 type:1,token:3701282876,server_side:1,family:2,saddr4:10.0.1.1,... And no token value in this MPTCP_EVENT_LISTENER_CREATED event. This patch fixes this by specifying the type 1 item to search for token values. Signed-off-by:
-
Geliang Tang authored
This patch adds two new MPTCP netlink event types for PM listening socket create and close, named MPTCP_EVENT_LISTENER_CREATED and MPTCP_EVENT_LISTENER_CLOSED. Add a new function mptcp_event_pm_listener() to push the new events with family, port and addr to userspace. Invoke mptcp_event_pm_listener() with MPTCP_EVENT_LISTENER_CREATED in mptcp_listen() and mptcp_pm_nl_create_listen_socket(), invoke it with MPTCP_EVENT_LISTENER_CLOSED in __mptcp_close_ssk(). Signed-off-by:
-
Matthieu Baerts authored
Just to avoid classical Bash pitfall where variables are accidentally overridden by other functions because the proper scope has not been defined. That's also what is done in other MPTCP selftests scripts where all non local variables are defined at the beginning of the script and the others are defined with the "local" keyword. Reviewed-by:
-
Matthieu Baerts authored
It is clearer to declare these global variables at the beginning of the file as it is done in other MPTCP selftests rather than in functions in the middle of the script. So for uniformity reason, we can do the same here in mptcp_sockopt.sh. Suggested-by:
-
Matthieu Baerts authored
The definition of 'rndh' was probably copied from one script to another but some times, 'sec' was not defined, not used and/or not spelled properly. Here all the 'rndh' are now defined the same way. Reviewed-by:
-
Matthieu Baerts authored
Some variables were set but never used. This was not causing any issues except adding some confusion and having shellcheck complaining about them. Reviewed-by:
-
Matthieu Baerts authored
A new "sandbox" net namespace is available where no other netfilter rules have been added. Use this new netns instead of re-using "ns1" and clean it. Reviewed-by:
-
Jakub Kicinski authored
I must have missed that these stats are only exposed via the unstructured ethtool -S when they got merged. Plumb in the structured form. Reviewed-by:
Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20221130013108.90062-1-kuba@kernel.orgSigned-off-by:
-
- 01 Dec, 2022 23 commits
-
-
Jakub Kicinski authored
Arınç ÜNAL says: ==================== remove label = "cpu" from DSA dt-binding With this patch series, we're completely getting rid of 'label = "cpu";' which is not used by the DSA dt-binding at all. Information for taking the patches for maintainers: Patch 1: netdev maintainers (based off netdev/net-next.git main) Patch 2-3: SoC maintainers (based off soc/soc.git soc/dt) Patch 4: MIPS maintainers (based off mips/linux.git mips-next) Patch 5: PowerPC maintainers (based off powerpc/linux.git next-test) I've been meaning to submit this for a few months. Find the relevant conversation here: https://lore.kernel.org/netdev/20220913155408.GA3802998-robh@kernel.org/ Here's how I did it, for the interested (or suggestions): Find the platforms which have got 'label = "cpu";' defined. grep -rnw . -e 'label = "cpu";' Remove the line where 'label = "cpu";' is included. sed -i /'label = "cpu";'/,+d arch/arm/boot/dts/* sed -i /'label = "cpu";'/,+d arch/arm64/boot/dts/freescale/* sed -i /'label = "cpu";'/,+d arch/arm64/boot/dts/marvell/* sed -i /'label = "cpu";'/,+d arch/arm64/boot/dts/mediatek/* sed -i /'label = "cpu";'/,+d arch/arm64/boot/dts/rockchip/* sed -i /'label = "cpu";'/,+d arch/mips/boot/dts/qca/* sed -i /'label = "cpu";'/,+d arch/mips/boot/dts/ralink/* sed -i /'label = "cpu";'/,+d arch/powerpc/boot/dts/turris1x.dts sed -i /'label = "cpu";'/,+d Documentation/devicetree/bindings/net/qca,ar71xx.yaml Restore the symlink files which typechange after running sed. ==================== Link: https://lore.kernel.org/r/20221130141040.32447-1-arinc.unal@arinc9.comSigned-off-by:
-
Arınç ÜNAL authored
This is not used by the DSA dt-binding, so remove it from the examples. Signed-off-by:
Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by:
Oleksij Rempel <o.rempel@pengutronix.de> Acked-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Jakub Kicinski authored
Dmitry Safonov says: ==================== net/tcp: Dynamically disable TCP-MD5 static key The static key introduced by commit 6015c71e ("tcp: md5: add tcp_md5_needed jump label") is a fast-path optimization aimed at avoiding a cache line miss. Once an MD5 key is introduced in the system the static key is enabled and never disabled. Address this by disabling the static key when the last tcp_md5sig_info in system is destroyed. Previously it was submitted as a part of TCP-AO patches set [1]. Now in attempt to split 36 patches submission, I send this independently. Version 5: https://lore.kernel.org/all/20221122185534.308643-1-dima@arista.com/T/#u Version 4: https://lore.kernel.org/all/20221115211905.1685426-1-dima@arista.com/T/#u Version 3: https://lore.kernel.org/all/20221111212320.1386566-1-dima@arista.com/T/#u Version 2: https://lore.kernel.org/all/20221103212524.865762-1-dima@arista.com/T/#u Version 1: https://lore.kernel.org/all/20221102211350.625011-1-dima@arista.com/T/#u [1]: https://lore.kernel.org/all/20221027204347.529913-1-dima@arista.com/T/#u ==================== Link: https://lore.kernel.org/r/20221123173859.473629-1-dima@arista.comSigned-off-by:
-
Dmitry Safonov authored
Convert BUG_ON() to WARN_ON_ONCE() and warn as well for unlikely static key int overflow error-path. Signed-off-by:
Dmitry Safonov <dima@arista.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Dmitry Safonov authored
If the kernel was short on (atomic) memory and failed to allocate it - don't proceed to creation of request socket. Otherwise the socket would be unsigned and userspace likely doesn't expect that the TCP is not MD5-signed anymore. Signed-off-by:
-
Dmitry Safonov authored
To do that, separate two scenarios: - where it's the first MD5 key on the system, which means that enabling of the static key may need to sleep; - copying of an existing key from a listening socket to the request socket upon receiving a signed TCP segment, where static key was already enabled (when the key was added to the listening socket). Now the life-time of the static branch for TCP-MD5 is until: - last tcp_md5sig_info is destroyed - last socket in time-wait state with MD5 key is closed. Which means that after all sockets with TCP-MD5 keys are gone, the system gets back the performance of disabled md5-key static branch. While at here, provide static_key_fast_inc() helper that does ref counter increment in atomic fashion (without grabbing cpus_read_lock() on CONFIG_JUMP_LABEL=y). This is needed to add a new user for a static_key when the caller controls the lifetime of another user. Signed-off-by:
-
Dmitry Safonov authored
Add a helper to allocate tcp_md5sig_info, that will help later to do/allocate things when info allocated, once per socket. Signed-off-by:
-
Dmitry Safonov authored
1. With CONFIG_JUMP_LABEL=n static_key_slow_inc() doesn't have any protection against key->enabled refcounter overflow. 2. With CONFIG_JUMP_LABEL=y static_key_slow_inc_cpuslocked() still may turn the refcounter negative as (v + 1) may overflow. key->enabled is indeed a ref-counter as it's documented in multiple places: top comment in jump_label.h, Documentation/staging/static-keys.rst, etc. As -1 is reserved for static key that's in process of being enabled, functions would break with negative key->enabled refcount: - for CONFIG_JUMP_LABEL=n negative return of static_key_count() breaks static_key_false(), static_key_true() - the ref counter may become 0 from negative side by too many static_key_slow_inc() calls and lead to use-after-free issues. These flaws result in that some users have to introduce an additional mutex and prevent the reference counter from overflowing themselves, see bpf_enable_runtime_stats() checking the counter against INT_MAX / 2. Prevent the reference counter overflow by checking if (v + 1) > 0. Change functions API to return whether the increment was successful. Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipJakub Kicinski authored
Pull in locking/core from tip (just a single patch) to avoid a conflict with a jump_label change needed by a TCP cleanup. Link: https://lore.kernel.org/all/Y4B17nBArWS1Iywo@hirez.programming.kicks-ass.net/Signed-off-by:
-
Juhee Kang authored
The open code is defined as a helper function(tp_to_dev) on r8169_main.c, which the open code is &tp->pci_dev->dev. The helper function was added in commit 1e1205b7 ("r8169: add helper tp_to_dev"). And then later, commit f1e911d5 ("r8169: add basic phylib support") added r8169_phylink_handler function but it didn't use the helper function. Thus, tp_to_dev() replaces the open code. This patch doesn't change logic. Signed-off-by:
Juhee Kang <claudiajkang@gmail.com> Reviewed-by:
Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/20221129161244.5356-1-claudiajkang@gmail.comSigned-off-by:
-
Paolo Abeni authored
Vladimir Oltean says: ==================== Fix rtnl_mutex deadlock with DPAA2 and SFP modules This patch set deliberately targets net-next and lacks Fixes: tags due to caution on my part. While testing some SFP modules on the Solidrun Honeycomb LX2K platform, I noticed that rebooting causes a deadlock: ============================================ WARNING: possible recursive locking detected 6.1.0-rc5-07010-ga9b9500ffaac-dirty #656 Not tainted -------------------------------------------- systemd-shutdow/1 is trying to acquire lock: ffffa62db6cf42f0 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_lock+0x1c/0x30 but task is already holding lock: ffffa62db6cf42f0 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_lock+0x1c/0x30 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(rtnl_mutex); lock(rtnl_mutex); *** DEADLOCK *** May be due to missing lock nesting notation 6 locks held by systemd-shutdow/1: #0: ffffa62db6863c70 (system_transition_mutex){+.+.}-{4:4}, at: __do_sys_reboot+0xd4/0x260 #1: ffff2f2b0176f100 (&dev->mutex){....}-{4:4}, at: device_shutdown+0xf4/0x260 #2: ffff2f2b017be900 (&dev->mutex){....}-{4:4}, at: device_shutdown+0x104/0x260 #3: ffff2f2b017680f0 (&dev->mutex){....}-{4:4}, at: device_release_driver_internal+0x40/0x260 #4: ffff2f2b0e1608f0 (&dev->mutex){....}-{4:4}, at: device_release_driver_internal+0x40/0x260 #5: ffffa62db6cf42f0 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_lock+0x1c/0x30 stack backtrace: CPU: 6 PID: 1 Comm: systemd-shutdow Not tainted 6.1.0-rc5-07010-ga9b9500ffaac-dirty #656 Hardware name: SolidRun LX2160A Honeycomb (DT) Call trace: lock_acquire+0x68/0x84 __mutex_lock+0x98/0x460 mutex_lock_nested+0x2c/0x40 rtnl_lock+0x1c/0x30 sfp_bus_del_upstream+0x1c/0xac phylink_destroy+0x1c/0x50 dpaa2_mac_disconnect+0x28/0x70 dpaa2_eth_remove+0x1dc/0x1f0 fsl_mc_driver_remove+0x24/0x60 device_remove+0x70/0x80 device_release_driver_internal+0x1f0/0x260 device_links_unbind_consumers+0xe0/0x110 device_release_driver_internal+0x138/0x260 device_release_driver+0x18/0x24 bus_remove_device+0x12c/0x13c device_del+0x16c/0x424 fsl_mc_device_remove+0x28/0x40 __fsl_mc_device_remove+0x10/0x20 device_for_each_child+0x5c/0xac dprc_remove+0x94/0xb4 fsl_mc_driver_remove+0x24/0x60 device_remove+0x70/0x80 device_release_driver_internal+0x1f0/0x260 device_release_driver+0x18/0x24 bus_remove_device+0x12c/0x13c device_del+0x16c/0x424 fsl_mc_bus_remove+0x8c/0x10c fsl_mc_bus_shutdown+0x10/0x20 platform_shutdown+0x24/0x3c device_shutdown+0x15c/0x260 kernel_restart+0x40/0xa4 __do_sys_reboot+0x1e4/0x260 __arm64_sys_reboot+0x24/0x30 But fixing this appears to be not so simple. The patch set represents my attempt to address it. In short, the problem is that dpaa2_mac_connect() and dpaa2_mac_disconnect() call 2 phylink functions in a row, one takes rtnl_lock() itself - phylink_create(), and one which requires rtnl_lock() to be held by the caller - phylink_fwnode_phy_connect(). The existing approach in the drivers is too simple. We take rtnl_lock() when calling dpaa2_mac_connect(), which is what results in the deadlock. Fixing just that creates another problem. The drivers make use of rtnl_lock() for serializing with other code paths too. I think I've found all those code paths, and established other mechanisms for serializing with them. ==================== Link: https://lore.kernel.org/r/20221129141221.872653-1-vladimir.oltean@nxp.comSigned-off-by: -
Vladimir Oltean authored
After the introduction of a private mac_lock that serializes access to priv->mac (and port_priv->mac in the switch), the only remaining purpose of rtnl_lock() is to satisfy the locking requirements of phylink_fwnode_phy_connect() and phylink_disconnect_phy(). But the functions these live in, dpaa2_mac_connect() and dpaa2_mac_disconnect(), have contradictory locking requirements. While phylink_fwnode_phy_connect() wants rtnl_lock() to be held, phylink_create() wants it to not be held. Move the rtnl_lock() from top-level (in the dpaa2-eth and dpaa2-switch drivers) to only surround the phylink calls that require it, in the dpaa2-mac library code. This is possible because dpaa2_mac_connect() and dpaa2_mac_disconnect() run unlocked, and there isn't any danger of an AB/BA deadlock between the rtnl_mutex and other private locks. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Tested-by:
-
Vladimir Oltean authored
The dpaa2-switch driver uses a DPMAC in the same way as the dpaa2-eth driver, so we need to duplicate the locking solution established by the previous change to the switch driver as well. Signed-off-by:
-
Vladimir Oltean authored
The dpaa2 architecture permits dynamic connections between objects on the fsl-mc bus, specifically between a DPNI object (represented by a struct net_device) and a DPMAC object (represented by a struct phylink). The DPNI driver is notified when those connections are created/broken through the dpni_irq0_handler_thread() method. To ensure that ethtool operations, as well as netdev up/down operations serialize with the connection/disconnection of the DPNI with a DPMAC, dpni_irq0_handler_thread() takes the rtnl_lock() to block those other operations from taking place. There is code called by dpaa2_mac_connect() which wants to acquire the rtnl_mutex once again, see phylink_create() -> phylink_register_sfp() -> sfp_bus_add_upstream() -> rtnl_lock(). So the strategy doesn't quite work out, even though it's fairly simple. Create a different strategy, where all code paths in the dpaa2-eth driver access priv->mac only while they are holding priv->mac_lock. The phylink instance is not created or connected to the PHY under the priv->mac_lock, but only assigned to priv->mac then. This will eliminate the reliance on the rtnl_mutex. Add lockdep annotations and put comments where holding the lock is not necessary, and priv->mac can be dereferenced freely. Signed-off-by:
-
Vladimir Oltean authored
dpaa2_eth_connect_mac() is called both from dpaa2_eth_probe() and from dpni_irq0_handler_thread(). It could happen that the DPNI gets connected to a DPMAC on the fsl-mc bus exactly during probe, as soon as the "endpoint change" interrupt is requested in dpaa2_eth_setup_irqs(). This will cause the dpni_irq0_handler_thread() to register a phylink instance for that DPMAC. Then, the probing function will also try to register a phylink instance for the same DPMAC, operation which should fail (and this will fail the probing of the driver). Reorder dpaa2_eth_setup_irqs() and dpaa2_eth_connect_mac(), such that dpni_irq0_handler_thread() never races with the DPMAC-related portion of the probing path. Also reorder dpaa2_eth_disconnect_mac() to be in the mirror position of dpaa2_eth_connect_mac() in the teardown path. Signed-off-by:
-
Vladimir Oltean authored
The helper function will gain a lockdep annotation in a future patch. Make sure to benefit from it. Signed-off-by:
-
Vladimir Oltean authored
DPNIs and DPSW objects can connect and disconnect at runtime from DPMAC objects on the same fsl-mc bus. The DPMAC object also holds "ethtool -S" unstructured counters. Those counters are only shown for the entity owning the netdev (DPNI, DPSW) if it's connected to a DPMAC. The ethtool stringset code path is split into multiple callbacks, but currently, connecting and disconnecting the DPMAC takes the rtnl_lock(). This blocks the entire ethtool code path from running, see ethnl_default_doit() -> rtnl_lock() -> ops->prepare_data() -> strset_prepare_data(). This is going to be a problem if we are going to no longer require rtnl_lock() when connecting/disconnecting the DPMAC, because the DPMAC could appear between ops->get_sset_count() and ops->get_strings(). If it appears out of the blue, we will provide a stringset into an array that was dimensioned thinking the DPMAC wouldn't be there => array accessed out of bounds. There isn't really a good way to work around that, and I don't want to put too much pressure on the ethtool framework by playing locking games. Just make the DPMAC counters be always available. They'll be zeroes if the DPNI or DPSW isn't connected to a DPMAC. Signed-off-by:
-
Vladimir Oltean authored
The dpaa2-switch has the exact same locking requirements when connected to a DPMAC, so it needs port_priv->mac to always point either to NULL, or to a DPMAC with a fully initialized phylink instance. Make the same preparatory change in the dpaa2-switch driver as in the dpaa2-eth one. Signed-off-by:
-
Vladimir Oltean authored
There are 2 requirements for correct code: - Any time the driver accesses the priv->mac pointer at runtime, it either holds NULL to indicate a DPNI-DPNI connection (or unconnected DPNI), or a struct dpaa2_mac whose phylink instance was fully initialized (created and connected to the PHY). No changes are made to priv->mac while it is being used. Currently, rtnl_lock() watches over the call to dpaa2_eth_connect_mac(), so it serves the purpose of serializing this with all readers of priv->mac. - dpaa2_mac_connect() should run unlocked, because inside it are 2 phylink calls with incompatible locking requirements: phylink_create() requires that the rtnl_mutex isn't held, and phylink_fwnode_phy_connect() requires that the rtnl_mutex is held. The only way to solve those contradictory requirements is to let dpaa2_mac_connect() take rtnl_lock() when it needs to. To solve both requirements, we need to identify the writer side of the priv->mac pointer, which can be wrapped in a mutex private to the driver in a future patch. The dpaa2_mac_connect() cannot be part of the writer side critical section, because of an AB/BA deadlock with rtnl_lock(). So the strategy needs to be that where we prepare the DPMAC by calling dpaa2_mac_connect(), and only make priv->mac point to it once it's fully prepared. This ensures that the writer side critical section has the absolute minimum surface it can. The reverse strategy is adopted in the dpaa2_eth_disconnect_mac() code path. This makes sure that priv->mac is NULL when we start tearing down the DPMAC that we disconnected from, and concurrent code will simply not see it. No locking changes in this patch (concurrent code is still blocked by the rtnl_mutex). Signed-off-by:
-
Vladimir Oltean authored
dpaa2_mac_disconnect() will only be called with a NULL mac->phylink if dpaa2_mac_connect() failed, or was never called. The callers are these: dpaa2_eth_disconnect_mac(): if (dpaa2_eth_is_type_phy(priv)) dpaa2_mac_disconnect(priv->mac); dpaa2_switch_port_disconnect_mac(): if (dpaa2_switch_port_is_type_phy(port_priv)) dpaa2_mac_disconnect(port_priv->mac); priv->mac can be NULL, but in that case, dpaa2_eth_is_type_phy() returns false, and dpaa2_mac_disconnect() is never called. Similar for dpaa2-switch. When priv->mac is non-NULL, it means that dpaa2_mac_connect() returned zero (success), and therefore, priv->mac->phylink is also a valid pointer. Signed-off-by:
-
Vladimir Oltean authored
The phylink handling is intended to be hidden inside the dpaa2_mac object. Move the phylink_start() call into dpaa2_mac_start(), and phylink_stop() into dpaa2_mac_stop(). Signed-off-by:
-
Vladimir Oltean authored
dpaa2_mac_is_type_fixed() is a header with no implementation and no callers, which is referenced from the documentation though. It can be deleted. On the other hand, it would be useful to reuse the code between dpaa2_eth_is_type_phy() and dpaa2_switch_port_is_type_phy(). That common code should be called dpaa2_mac_is_type_phy(), so let's create that. The removal and the addition are merged into the same patch because, in fact, is_type_phy() is the logical opposite of is_type_fixed(). Signed-off-by:
-
Vladimir Oltean authored
dpaa2_eth_setup_dpni() is called from the probe path and dpaa2_eth_set_link_ksettings() is propagated to user space. include/linux/errno.h says that ENOTSUPP is "Defined for the NFSv3 protocol". Conventional wisdom has it to not use it in networking drivers. Replace it with -EOPNOTSUPP. Signed-off-by:
-
