- 25 Apr, 2024 32 commits
-
-
Geert Uytterhoeven authored
As interrupts are now requested from ravb_probe(), before calling register_netdev(), ndev->name still contains the template "eth%d", leading to funny names in /proc/interrupts. E.g. on R-Car E3: 89: 0 0 GICv2 93 Level eth%d:ch22:multi 90: 0 3 GICv2 95 Level eth%d:ch24:emac 91: 0 23484 GICv2 71 Level eth%d:ch0:rx_be 92: 0 0 GICv2 72 Level eth%d:ch1:rx_nc 93: 0 13735 GICv2 89 Level eth%d:ch18:tx_be 94: 0 0 GICv2 90 Level eth%d:ch19:tx_nc Worse, on platforms with multiple RAVB instances (e.g. R-Car V4H), all interrupts have similar names. Fix this by using the device name instead, like is done in several other drivers: 89: 0 0 GICv2 93 Level e6800000.ethernet:ch22:multi 90: 0 1 GICv2 95 Level e6800000.ethernet:ch24:emac 91: 0 28578 GICv2 71 Level e6800000.ethernet:ch0:rx_be 92: 0 0 GICv2 72 Level e6800000.ethernet:ch1:rx_nc 93: 0 14044 GICv2 89 Level e6800000.ethernet:ch18:tx_be 94: 0 0 GICv2 90 Level e6800000.ethernet:ch19:tx_nc Rename the local variable dev_name, as it shadows the dev_name() function, and pre-initialize it, to simplify the code. Fixes: 32f012b8 ("net: ravb: Move getting/requesting IRQs in the probe() method") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by:
Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by:
Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> # on RZ/G3S Link: https://lore.kernel.org/r/cde67b68adf115b3cf0b44c32334ae00b2fbb321.1713944647.git.geert+renesas@glider.beSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Su Hui authored
Clang static checker(scan-build) warning： drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c:line 2184, column 2 Attempt to free released memory. npc_mcam_rsrcs_deinit() has released 'mcam->counters.bmap'. Deleted this redundant kfree() to fix this double free problem. Fixes: dd784287 ("octeontx2-af: Add new devlink param to configure maximum usable NIX block LFs") Signed-off-by:
Su Hui <suhui@nfschina.com> Reviewed-by:
Geetha sowjanya <gakula@marvell.com> Reviewed-by:
Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by:
Hariprasad Kelam <hkelam@marvell.com> Link: https://lore.kernel.org/r/20240424022724.144587-1-suhui@nfschina.comSigned-off-by:
-
Jason Reeder authored
The CPTS, by design, captures the messageType (Sync, Delay_Req, etc.) field from the second nibble of the PTP header which is defined in the PTPv2 (1588-2008) specification. In the PTPv1 (1588-2002) specification the first two bytes of the PTP header are defined as the versionType which is always 0x0001. This means that any PTPv1 packets that are tagged for TX timestamping by the CPTS will have their messageType set to 0x0 which corresponds to a Sync message type. This causes issues when a PTPv1 stack is expecting a Delay_Req (messageType: 0x1) timestamp that never appears. Fix this by checking if the ptp_class of the timestamped TX packet is PTP_CLASS_V1 and then matching the PTP sequence ID to the stored sequence ID in the skb->cb data structure. If the sequence IDs match and the packet is of type PTPv1 then there is a chance that the messageType has been incorrectly stored by the CPTS so overwrite the messageType stored by the CPTS with the messageType from the skb->cb data structure. This allows the PTPv1 stack to receive TX timestamps for Delay_Req packets which are necessary to lock onto a PTP Leader. Signed-off-by:
Jason Reeder <jreeder@ti.com> Signed-off-by:
Ravi Gunasekaran <r-gunasekaran@ti.com> Tested-by:
Ed Trexel <ed.trexel@hp.com> Fixes: f6bd5952 ("net: ethernet: ti: introduce am654 common platform time sync driver") Link: https://lore.kernel.org/r/20240424071626.32558-1-r-gunasekaran@ti.comSigned-off-by:
-
Jakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-04-23 (i40e, iavf, ice) This series contains updates to i40e, iavf, and ice drivers. Sindhu removes WQ_MEM_RECLAIM flag from workqueue for i40e. Erwan Velu adjusts message to avoid confusion on base being reported on i40e. Sudheer corrects insufficient check for TC equality on iavf. Jake corrects ordering of locks to avoid possible deadlock on ice. ==================== Link: https://lore.kernel.org/r/20240423182723.740401-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Jakub Kicinski authored
Rahul Rameshbabu says: ==================== Fix isolation of broadcast traffic and unmatched unicast traffic with MACsec offload Some device drivers support devices that enable them to annotate whether a Rx skb refers to a packet that was processed by the MACsec offloading functionality of the device. Logic in the Rx handling for MACsec offload does not utilize this information to preemptively avoid forwarding to the macsec netdev currently. Because of this, things like multicast messages or unicast messages with an unmatched destination address such as ARP requests are forwarded to the macsec netdev whether the message received was MACsec encrypted or not. The goal of this patch series is to improve the Rx handling for MACsec offload for devices capable of annotating skbs received that were decrypted by the NIC offload for MACsec. Here is a summary of the issue that occurs with the existing logic today. * The current design of the MACsec offload handling path tries to use "best guess" mechanisms for determining whether a packet associated with the currently handled skb in the datapath was processed via HW offload * The best guess mechanism uses the following heuristic logic (in order of precedence) - Check if header destination MAC address matches MACsec netdev MAC address -> forward to MACsec port - Check if packet is multicast traffic -> forward to MACsec port - MACsec security channel was able to be looked up from skb offload context (mlx5 only) -> forward to MACsec port * Problem: plaintext traffic can potentially solicit a MACsec encrypted response from the offload device - Core aspect of MACsec is that it identifies unauthorized LAN connections and excludes them from communication + This behavior can be seen when not enabling offload for MACsec - The offload behavior violates this principle in MACsec I believe this behavior is a security bug since applications utilizing MACsec could be exploited using this behavior, and the correct way to resolve this is by having the hardware correctly indicate whether MACsec offload occurred for the packet or not. In the patches in this series, I leave a warning for when the problematic path occurs because I cannot figure out a secure way to fix the security issue that applies to the core MACsec offload handling in the Rx path without breaking MACsec offload for other vendors. Shown at the bottom is an example use case where plaintext traffic sent to a physical port of a NIC configured for MACsec offload is unable to be handled correctly by the software stack when the NIC provides awareness to the kernel about whether the received packet is MACsec traffic or not. In this specific example, plaintext ARP requests are being responded with MACsec encrypted ARP replies (which leads to routing information being unable to be built for the requester). Side 1 ip link del macsec0 ip address flush mlx5_1 ip address add 1.1.1.1/24 dev mlx5_1 ip link set dev mlx5_1 up ip link add link mlx5_1 macsec0 type macsec sci 1 encrypt on ip link set dev macsec0 address 00:11:22:33:44:66 ip macsec offload macsec0 mac ip macsec add macsec0 tx sa 0 pn 1 on key 00 dffafc8d7b9a43d5b9a3dfbbf6a30c16 ip macsec add macsec0 rx sci 2 on ip macsec add macsec0 rx sci 2 sa 0 pn 1 on key 00 ead3664f508eb06c40ac7104cdae4ce5 ip address flush macsec0 ip address add 2.2.2.1/24 dev macsec0 ip link set dev macsec0 up # macsec0 enters promiscuous mode. # This enables all traffic received on macsec_vlan to be processed by # the macsec offload rx datapath. This however means that traffic # meant to be received by mlx5_1 will be incorrectly steered to # macsec0 as well. ip link add link macsec0 name macsec_vlan type vlan id 1 ip link set dev macsec_vlan address 00:11:22:33:44:88 ip address flush macsec_vlan ip address add 3.3.3.1/24 dev macsec_vlan ip link set dev macsec_vlan up Side 2 ip link del macsec0 ip address flush mlx5_1 ip address add 1.1.1.2/24 dev mlx5_1 ip link set dev mlx5_1 up ip link add link mlx5_1 macsec0 type macsec sci 2 encrypt on ip link set dev macsec0 address 00:11:22:33:44:77 ip macsec offload macsec0 mac ip macsec add macsec0 tx sa 0 pn 1 on key 00 ead3664f508eb06c40ac7104cdae4ce5 ip macsec add macsec0 rx sci 1 on ip macsec add macsec0 rx sci 1 sa 0 pn 1 on key 00 dffafc8d7b9a43d5b9a3dfbbf6a30c16 ip address flush macsec0 ip address add 2.2.2.2/24 dev macsec0 ip link set dev macsec0 up # macsec0 enters promiscuous mode. # This enables all traffic received on macsec_vlan to be processed by # the macsec offload rx datapath. This however means that traffic # meant to be received by mlx5_1 will be incorrectly steered to # macsec0 as well. ip link add link macsec0 name macsec_vlan type vlan id 1 ip link set dev macsec_vlan address 00:11:22:33:44:99 ip address flush macsec_vlan ip address add 3.3.3.2/24 dev macsec_vlan ip link set dev macsec_vlan up Side 1 ping -I mlx5_1 1.1.1.2 PING 1.1.1.2 (1.1.1.2) from 1.1.1.1 mlx5_1: 56(84) bytes of data. From 1.1.1.1 icmp_seq=1 Destination Host Unreachable ping: sendmsg: No route to host From 1.1.1.1 icmp_seq=2 Destination Host Unreachable From 1.1.1.1 icmp_seq=3 Destination Host Unreachable Changes: v2->v3: * Made dev paramater const for eth_skb_pkt_type helper as suggested by Sabrina Dubroca <sd@queasysnail.net> v1->v2: * Fixed series subject to detail the issue being fixed * Removed strange characters from cover letter * Added comment in example that illustrates the impact involving promiscuous mode * Added patch for generalizing packet type detection * Added Fixes: tags and targeting net * Removed pointless warning in the heuristic Rx path for macsec offload * Applied small refactor in Rx path offload to minimize scope of rx_sc local variable Link: https://github.com/Binary-Eater/macsec-rx-offload/blob/trunk/MACsec_violation_in_core_stack_offload_rx_handling.pdf Link: https://lore.kernel.org/netdev/20240419213033.400467-5-rrameshbabu@nvidia.com/ Link: https://lore.kernel.org/netdev/20240419011740.333714-1-rrameshbabu@nvidia.com/ Link: https://lore.kernel.org/netdev/87r0l25y1c.fsf@nvidia.com/ Link: https://lore.kernel.org/netdev/20231116182900.46052-1-rrameshbabu@nvidia.com/ ==================== Link: https://lore.kernel.org/r/20240423181319.115860-1-rrameshbabu@nvidia.comSigned-off-by: -
Jacob Keller authored
9f74a3df ("ice: Fix VF Reset paths when interface in a failed over aggregate"), the ice driver has acquired the LAG mutex in ice_reset_vf(). The commit placed this lock acquisition just prior to the acquisition of the VF configuration lock. If ice_reset_vf() acquires the configuration lock via the ICE_VF_RESET_LOCK flag, this could deadlock with ice_vc_cfg_qs_msg() because it always acquires the locks in the order of the VF configuration lock and then the LAG mutex. Lockdep reports this violation almost immediately on creating and then removing 2 VF: ====================================================== WARNING: possible circular locking dependency detected 6.8.0-rc6 #54 Tainted: G W O ------------------------------------------------------ kworker/60:3/6771 is trying to acquire lock: ff40d43e099380a0 (&vf->cfg_lock){+.+.}-{3:3}, at: ice_reset_vf+0x22f/0x4d0 [ice] but task is already holding lock: ff40d43ea1961210 (&pf->lag_mutex){+.+.}-{3:3}, at: ice_reset_vf+0xb7/0x4d0 [ice] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&pf->lag_mutex){+.+.}-{3:3}: __lock_acquire+0x4f8/0xb40 lock_acquire+0xd4/0x2d0 __mutex_lock+0x9b/0xbf0 ice_vc_cfg_qs_msg+0x45/0x690 [ice] ice_vc_process_vf_msg+0x4f5/0x870 [ice] __ice_clean_ctrlq+0x2b5/0x600 [ice] ice_service_task+0x2c9/0x480 [ice] process_one_work+0x1e9/0x4d0 worker_thread+0x1e1/0x3d0 kthread+0x104/0x140 ret_from_fork+0x31/0x50 ret_from_fork_asm+0x1b/0x30 -> #0 (&vf->cfg_lock){+.+.}-{3:3}: check_prev_add+0xe2/0xc50 validate_chain+0x558/0x800 __lock_acquire+0x4f8/0xb40 lock_acquire+0xd4/0x2d0 __mutex_lock+0x9b/0xbf0 ice_reset_vf+0x22f/0x4d0 [ice] ice_process_vflr_event+0x98/0xd0 [ice] ice_service_task+0x1cc/0x480 [ice] process_one_work+0x1e9/0x4d0 worker_thread+0x1e1/0x3d0 kthread+0x104/0x140 ret_from_fork+0x31/0x50 ret_from_fork_asm+0x1b/0x30 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&pf->lag_mutex); lock(&vf->cfg_lock); lock(&pf->lag_mutex); lock(&vf->cfg_lock); *** DEADLOCK *** 4 locks held by kworker/60:3/6771: #0: ff40d43e05428b38 ((wq_completion)ice){+.+.}-{0:0}, at: process_one_work+0x176/0x4d0 #1: ff50d06e05197e58 ((work_completion)(&pf->serv_task)){+.+.}-{0:0}, at: process_one_work+0x176/0x4d0 #2: ff40d43ea1960e50 (&pf->vfs.table_lock){+.+.}-{3:3}, at: ice_process_vflr_event+0x48/0xd0 [ice] #3: ff40d43ea1961210 (&pf->lag_mutex){+.+.}-{3:3}, at: ice_reset_vf+0xb7/0x4d0 [ice] stack backtrace: CPU: 60 PID: 6771 Comm: kworker/60:3 Tainted: G W O 6.8.0-rc6 #54 Hardware name: Workqueue: ice ice_service_task [ice] Call Trace: <TASK> dump_stack_lvl+0x4a/0x80 check_noncircular+0x12d/0x150 check_prev_add+0xe2/0xc50 ? save_trace+0x59/0x230 ? add_chain_cache+0x109/0x450 validate_chain+0x558/0x800 __lock_acquire+0x4f8/0xb40 ? lockdep_hardirqs_on+0x7d/0x100 lock_acquire+0xd4/0x2d0 ? ice_reset_vf+0x22f/0x4d0 [ice] ? lock_is_held_type+0xc7/0x120 __mutex_lock+0x9b/0xbf0 ? ice_reset_vf+0x22f/0x4d0 [ice] ? ice_reset_vf+0x22f/0x4d0 [ice] ? rcu_is_watching+0x11/0x50 ? ice_reset_vf+0x22f/0x4d0 [ice] ice_reset_vf+0x22f/0x4d0 [ice] ? process_one_work+0x176/0x4d0 ice_process_vflr_event+0x98/0xd0 [ice] ice_service_task+0x1cc/0x480 [ice] process_one_work+0x1e9/0x4d0 worker_thread+0x1e1/0x3d0 ? __pfx_worker_thread+0x10/0x10 kthread+0x104/0x140 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> To avoid deadlock, we must acquire the LAG mutex only after acquiring the VF configuration lock. Fix the ice_reset_vf() to acquire the LAG mutex only after we either acquire or check that the VF configuration lock is held. Fixes: 9f74a3df ("ice: Fix VF Reset paths when interface in a failed over aggregate") Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Reviewed-by:
Dave Ertman <david.m.ertman@intel.com> Reviewed-by:
Mateusz Polchlopek <mateusz.polchlopek@intel.com> Tested-by:
Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by:
Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20240423182723.740401-5-anthony.l.nguyen@intel.comSigned-off-by:
-
Sudheer Mogilappagari authored
Same number of TCs doesn't imply that underlying TC configs are same. The config could be different due to difference in number of queues in each TC. Add utility function to determine if TC configs are same. Fixes: d5b33d02 ("i40evf: add ndo_setup_tc callback to i40evf") Signed-off-by:
Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Tested-by: Mineri Bhange <minerix.bhange@intel.com> (A Contingent Worker at Intel) Signed-off-by:
-
Erwan Velu authored
If the MFS is set below the default (0x2600), a warning message is reported like the following : MFS for port 1 has been set below the default: 600 This message is a bit confusing as the number shown here (600) is in fact an hexa number: 0x600 = 1536 Without any explicit "0x" prefix, this message is read like the MFS is set to 600 bytes. MFS, as per MTUs, are usually expressed in decimal base. This commit reports both current and default MFS values in decimal so it's less confusing for end-users. A typical warning message looks like the following : MFS for port 1 (1536) has been set below the default (9728) Signed-off-by:
Erwan Velu <e.velu@criteo.com> Reviewed-by:
Simon Horman <horms@kernel.org> Tested-by:
Tony Brelinski <tony.brelinski@intel.com> Signed-off-by:
-
Sindhu Devale authored
Issue reported by customer during SRIOV testing, call trace: When both i40e and the i40iw driver are loaded, a warning in check_flush_dependency is being triggered. This seems to be because of the i40e driver workqueue is allocated with the WQ_MEM_RECLAIM flag, and the i40iw one is not. Similar error was encountered on ice too and it was fixed by removing the flag. Do the same for i40e too. [Feb 9 09:08] ------------[ cut here ]------------ [ +0.000004] workqueue: WQ_MEM_RECLAIM i40e:i40e_service_task [i40e] is flushing !WQ_MEM_RECLAIM infiniband:0x0 [ +0.000060] WARNING: CPU: 0 PID: 937 at kernel/workqueue.c:2966 check_flush_dependency+0x10b/0x120 [ +0.000007] Modules linked in: snd_seq_dummy snd_hrtimer snd_seq snd_timer snd_seq_device snd soundcore nls_utf8 cifs cifs_arc4 nls_ucs2_utils rdma_cm iw_cm ib_cm cifs_md4 dns_resolver netfs qrtr rfkill sunrpc vfat fat intel_rapl_msr intel_rapl_common irdma intel_uncore_frequency intel_uncore_frequency_common ice ipmi_ssif isst_if_common skx_edac nfit libnvdimm x86_pkg_temp_thermal intel_powerclamp gnss coretemp ib_uverbs rapl intel_cstate ib_core iTCO_wdt iTCO_vendor_support acpi_ipmi mei_me ipmi_si intel_uncore ioatdma i2c_i801 joydev pcspkr mei ipmi_devintf lpc_ich intel_pch_thermal i2c_smbus ipmi_msghandler acpi_power_meter acpi_pad xfs libcrc32c ast sd_mod drm_shmem_helper t10_pi drm_kms_helper sg ixgbe drm i40e ahci crct10dif_pclmul libahci crc32_pclmul igb crc32c_intel libata ghash_clmulni_intel i2c_algo_bit mdio dca wmi dm_mirror dm_region_hash dm_log dm_mod fuse [ +0.000050] CPU: 0 PID: 937 Comm: kworker/0:3 Kdump: loaded Not tainted 6.8.0-rc2-Feb-net_dev-Qiueue-00279-gbd43c5687e05 #1 [ +0.000003] Hardware name: Intel Corporation S2600BPB/S2600BPB, BIOS SE5C620.86B.02.01.0013.121520200651 12/15/2020 [ +0.000001] Workqueue: i40e i40e_service_task [i40e] [ +0.000024] RIP: 0010:check_flush_dependency+0x10b/0x120 [ +0.000003] Code: ff 49 8b 54 24 18 48 8d 8b b0 00 00 00 49 89 e8 48 81 c6 b0 00 00 00 48 c7 c7 b0 97 fa 9f c6 05 8a cc 1f 02 01 e8 35 b3 fd ff <0f> 0b e9 10 ff ff ff 80 3d 78 cc 1f 02 00 75 94 e9 46 ff ff ff 90 [ +0.000002] RSP: 0018:ffffbd294976bcf8 EFLAGS: 00010282 [ +0.000002] RAX: 0000000000000000 RBX: ffff94d4c483c000 RCX: 0000000000000027 [ +0.000001] RDX: ffff94d47f620bc8 RSI: 0000000000000001 RDI: ffff94d47f620bc0 [ +0.000001] RBP: 0000000000000000 R08: 0000000000000000 R09: 00000000ffff7fff [ +0.000001] R10: ffffbd294976bb98 R11: ffffffffa0be65e8 R12: ffff94c5451ea180 [ +0.000001] R13: ffff94c5ab5e8000 R14: ffff94c5c20b6e05 R15: ffff94c5f1330ab0 [ +0.000001] FS: 0000000000000000(0000) GS:ffff94d47f600000(0000) knlGS:0000000000000000 [ +0.000002] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000001] CR2: 00007f9e6f1fca70 CR3: 0000000038e20004 CR4: 00000000007706f0 [ +0.000000] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ +0.000001] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ +0.000001] PKRU: 55555554 [ +0.000001] Call Trace: [ +0.000001] <TASK> [ +0.000002] ? __warn+0x80/0x130 [ +0.000003] ? check_flush_dependency+0x10b/0x120 [ +0.000002] ? report_bug+0x195/0x1a0 [ +0.000005] ? handle_bug+0x3c/0x70 [ +0.000003] ? exc_invalid_op+0x14/0x70 [ +0.000002] ? asm_exc_invalid_op+0x16/0x20 [ +0.000006] ? check_flush_dependency+0x10b/0x120 [ +0.000002] ? check_flush_dependency+0x10b/0x120 [ +0.000002] __flush_workqueue+0x126/0x3f0 [ +0.000015] ib_cache_cleanup_one+0x1c/0xe0 [ib_core] [ +0.000056] __ib_unregister_device+0x6a/0xb0 [ib_core] [ +0.000023] ib_unregister_device_and_put+0x34/0x50 [ib_core] [ +0.000020] i40iw_close+0x4b/0x90 [irdma] [ +0.000022] i40e_notify_client_of_netdev_close+0x54/0xc0 [i40e] [ +0.000035] i40e_service_task+0x126/0x190 [i40e] [ +0.000024] process_one_work+0x174/0x340 [ +0.000003] worker_thread+0x27e/0x390 [ +0.000001] ? __pfx_worker_thread+0x10/0x10 [ +0.000002] kthread+0xdf/0x110 [ +0.000002] ? __pfx_kthread+0x10/0x10 [ +0.000002] ret_from_fork+0x2d/0x50 [ +0.000003] ? __pfx_kthread+0x10/0x10 [ +0.000001] ret_from_fork_asm+0x1b/0x30 [ +0.000004] </TASK> [ +0.000001] ---[ end trace 0000000000000000 ]--- Fixes: 4d5957cb ("i40e: remove WQ_UNBOUND and the task limit of our workqueue") Signed-off-by:
Sindhu Devale <sindhu.devale@intel.com> Reviewed-by:
Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Reviewed-by:
Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by:
Robert Ganzynkowicz <robert.ganzynkowicz@intel.com> Signed-off-by:
-
Dan Carpenter authored
The rx_chn->irq[] array is unsigned int but it should be signed for the error handling to work. Also if k3_udma_glue_rx_get_irq() returns zero then we should return -ENXIO instead of success. Fixes: 128d5874 ("net: ti: icssg-prueth: Add ICSSG ethernet driver") Signed-off-by:
Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by:
Roger Quadros <rogerq@kernel.org> Reviewed-by:
MD Danish Anwar <danishanwar@ti.com> Link: https://lore.kernel.org/r/05282415-e7f4-42f3-99f8-32fde8f30936@moroto.mountainSigned-off-by:
-
Rahul Rameshbabu authored
mlx5 Rx flow steering and CQE handling enable the driver to be able to update an skb's md_dst attribute as MACsec when MACsec traffic arrives when a device is configured for offloading. Advertise this to the core stack to take advantage of this capability. Cc: stable@vger.kernel.org Fixes: b7c9400c ("net/mlx5e: Implement MACsec Rx data path using MACsec skb_metadata_dst") Signed-off-by:
Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by:
Benjamin Poirier <bpoirier@nvidia.com> Reviewed-by:
Cosmin Ratiu <cratiu@nvidia.com> Reviewed-by:
Sabrina Dubroca <sd@queasysnail.net> Link: https://lore.kernel.org/r/20240423181319.115860-5-rrameshbabu@nvidia.comSigned-off-by:
-
Rahul Rameshbabu authored
Can now correctly identify where the packets should be delivered by using md_dst or its absence on devices that provide it. This detection is not possible without device drivers that update md_dst. A fallback pattern should be used for supporting such device drivers. This fallback mode causes multicast messages to be cloned to both the non-macsec and macsec ports, independent of whether the multicast message received was encrypted over MACsec or not. Other non-macsec traffic may also fail to be handled correctly for devices in promiscuous mode. Link: https://lore.kernel.org/netdev/ZULRxX9eIbFiVi7v@hog/ Cc: Sabrina Dubroca <sd@queasysnail.net> Cc: stable@vger.kernel.org Fixes: 860ead89 ("net/macsec: Add MACsec skb_metadata_dst Rx Data path support") Signed-off-by:
-
Rahul Rameshbabu authored
Enable reuse of logic in eth_type_trans for determining packet type. Suggested-by:
-
Rahul Rameshbabu authored
Cannot know whether a Rx skb missing md_dst is intended for MACsec or not without knowing whether the device is able to update this field during an offload. Assume that an offload to a MACsec device cannot support updating md_dst by default. Capable devices can advertise that they do indicate that an skb is related to a MACsec offloaded packet using the md_dst. Cc: Sabrina Dubroca <sd@queasysnail.net> Cc: stable@vger.kernel.org Fixes: 860ead89 ("net/macsec: Add MACsec skb_metadata_dst Rx Data path support") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wirelessDavid S. Miller authored
Johannes berg says: ==================== Fixes for the current cycle: * ath11k: convert to correct RCU iteration of IPv6 addresses * iwlwifi: link ID, FW API version, scanning and PASN fixes * cfg80211: NULL-deref and tracing fixes * mac80211: connection mode, mesh fast-TX, multi-link and various other small fixes ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
MD Danish Anwar authored
The DP83869 driver sets the MII bit (needed for PHY to work in MII mode) only if the op-mode is either DP83869_100M_MEDIA_CONVERT or DP83869_RGMII_100_BASE. Some drivers i.e. ICSSG support MII mode with op-mode as DP83869_RGMII_COPPER_ETHERNET for which the MII bit is not set in dp83869 driver. As a result MII mode on ICSSG doesn't work and below log is seen. TI DP83869 300b2400.mdio:0f: selected op-mode is not valid with MII mode icssg-prueth icssg1-eth: couldn't connect to phy ethernet-phy@0 icssg-prueth icssg1-eth: can't phy connect port MII0 Fix this by setting MII bit for DP83869_RGMII_COPPER_ETHERNET op-mode as well. Fixes: 94e86ef1 ("net: phy: dp83869: support mii mode when rgmii strap cfg is used") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothJakub Kicinski authored
Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - qca: set power_ctrl_enabled on NULL returned by gpiod_get_optional() - hci_sync: Using hci_cmd_sync_submit when removing Adv Monitor - qca: fix invalid device address check - hci_sync: Use advertised PHYs on hci_le_ext_create_conn_sync - Fix type of len in {l2cap,sco}_sock_getsockopt_old() - btusb: mediatek: Fix double free of skb in coredump - btusb: Add Realtek RTL8852BE support ID 0x0bda:0x4853 - btusb: Fix triggering coredump implementation for QCA * tag 'for-net-2024-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: qca: set power_ctrl_enabled on NULL returned by gpiod_get_optional() Bluetooth: hci_sync: Using hci_cmd_sync_submit when removing Adv Monitor Bluetooth: qca: fix NULL-deref on non-serdev setup Bluetooth: qca: fix NULL-deref on non-serdev suspend Bluetooth: btusb: mediatek: Fix double free of skb in coredump Bluetooth: MGMT: Fix failing to MGMT_OP_ADD_UUID/MGMT_OP_REMOVE_UUID Bluetooth: qca: fix invalid device address check Bluetooth: hci_event: Fix sending HCI_OP_READ_ENC_KEY_SIZE Bluetooth: btusb: Fix triggering coredump implementation for QCA Bluetooth: btusb: Add Realtek RTL8852BE support ID 0x0bda:0x4853 Bluetooth: hci_sync: Use advertised PHYs on hci_le_ext_create_conn_sync Bluetooth: Fix type of len in {l2cap,sco}_sock_getsockopt_old() ==================== Link: https://lore.kernel.org/r/20240424204102.2319483-1-luiz.dentz@gmail.comSigned-off-by: -
Jakub Kicinski authored
I added OOM and netpoll discard counters, naively assuming that the cpr pointer is pointing to a common completion ring. Turns out that is usually *a* completion ring but not *the* completion ring which bnapi->cp_ring points to. bnapi->cp_ring is where the stats are read from, so we end up reporting 0 thru ethtool -S and qstat even though the drop events have happened. Make 100% sure we're recording statistics in the correct structure. Fixes: 907fd4a2 ("bnxt: count discards due to memory allocation errors") Reviewed-by:
Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20240424002148.3937059-1-kuba@kernel.orgSigned-off-by:
-
Lukas Wunner authored
Roman reports a deadlock on unplug of a Thunderbolt docking station containing an Intel I225 Ethernet adapter. The root cause is that led_classdev's for LEDs on the adapter are registered such that they're device-managed by the netdev. That results in recursive acquisition of the rtnl_lock() mutex on unplug: When the driver calls unregister_netdev(), it acquires rtnl_lock(), then frees the device-managed resources. Upon unregistering the LEDs, netdev_trig_deactivate() invokes unregister_netdevice_notifier(), which tries to acquire rtnl_lock() again. Avoid by using non-device-managed LED registration. Stack trace for posterity: schedule+0x6e/0xf0 schedule_preempt_disabled+0x15/0x20 __mutex_lock+0x2a0/0x750 unregister_netdevice_notifier+0x40/0x150 netdev_trig_deactivate+0x1f/0x60 [ledtrig_netdev] led_trigger_set+0x102/0x330 led_classdev_unregister+0x4b/0x110 release_nodes+0x3d/0xb0 devres_release_all+0x8b/0xc0 device_del+0x34f/0x3c0 unregister_netdevice_many_notify+0x80b/0xaf0 unregister_netdev+0x7c/0xd0 igc_remove+0xd8/0x1e0 [igc] pci_device_remove+0x3f/0xb0 Fixes: ea578703 ("igc: Add support for LEDs on i225/i226") Reported-by:
Roman Lozko <lozko.roma@gmail.com> Closes: https://lore.kernel.org/r/CAEhC_B=ksywxCG_+aQqXUrGEgKq+4mqnSV8EBHOKbC3-Obj9+Q@mail.gmail.com/Reported-by:
"Marek Marczykowski-Górecki" <marmarek@invisiblethingslab.com> Closes: https://lore.kernel.org/r/ZhRD3cOtz5i-61PB@mail-itl/Signed-off-by:
Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by:
Lukas Wunner <lukas@wunner.de> Cc: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by:
Naama Meir <naamax.meir@linux.intel.com> Signed-off-by:
-
Duanqiang Wen authored
This reverts commit e30cef00. commit 99f4570c ("clkdev: Update clkdev id usage to allow for longer names") can fix clk_name exceed MAX_DEV_ID limits, so this commit is meaningless. Signed-off-by:
Duanqiang Wen <duanqiangwen@net-swift.com> Reviewed-by:
-
Duanqiang Wen authored
This reverts commit c644920c. when register i2c dev, txgbe shorten "i2c_designware" to "i2c_dw", will cause this i2c dev can't match platfom driver i2c_designware_platform. Signed-off-by:
-
Jakub Kicinski authored
Petr Machata says: ==================== mlxsw: Various ACL fixes Ido Schimmel writes: Fix various problems in the ACL (i.e., flower offload) code. See the commit messages for more details. ==================== Link: https://lore.kernel.org/r/cover.1713797103.git.petrm@nvidia.comSigned-off-by:
-
Ido Schimmel authored
The rehash delayed work is rescheduled with a delay if the number of credits at end of the work is not negative as supposedly it means that the migration ended. Otherwise, it is rescheduled immediately. After "mlxsw: spectrum_acl_tcam: Fix possible use-after-free during rehash" the above is no longer accurate as a non-negative number of credits is no longer indicative of the migration being done. It can also happen if the work encountered an error in which case the migration will resume the next time the work is scheduled. The significance of the above is that it is possible for the work to be pending and associated with hints that were allocated when the migration started. This leads to the hints being leaked [1] when the work is canceled while pending as part of ACL region dismantle. Fix by freeing the hints if hints are associated with a work that was canceled while pending. Blame the original commit since the reliance on not having a pending work associated with hints is fragile. [1] unreferenced object 0xffff88810e7c3000 (size 256): comm "kworker/0:16", pid 176, jiffies 4295460353 hex dump (first 32 bytes): 00 30 95 11 81 88 ff ff 61 00 00 00 00 00 00 80 .0......a....... 00 00 61 00 40 00 00 00 00 00 00 00 04 00 00 00 ..a.@........... backtrace (crc 2544ddb9): [<00000000cf8cfab3>] kmalloc_trace+0x23f/0x2a0 [<000000004d9a1ad9>] objagg_hints_get+0x42/0x390 [<000000000b143cf3>] mlxsw_sp_acl_erp_rehash_hints_get+0xca/0x400 [<0000000059bdb60a>] mlxsw_sp_acl_tcam_vregion_rehash_work+0x868/0x1160 [<00000000e81fd734>] process_one_work+0x59c/0xf20 [<00000000ceee9e81>] worker_thread+0x799/0x12c0 [<00000000bda6fe39>] kthread+0x246/0x300 [<0000000070056d23>] ret_from_fork+0x34/0x70 [<00000000dea2b93e>] ret_from_fork_asm+0x1a/0x30 Fixes: c9c9af91 ("mlxsw: spectrum_acl: Allow to interrupt/continue rehash work") Signed-off-by:Ido Schimmel <idosch@nvidia.com> Tested-by:
Alexander Zubkov <green@qrator.net> Signed-off-by:
Petr Machata <petrm@nvidia.com> Reviewed-by:
-
Ido Schimmel authored
Both the function that migrates all the chunks within a region and the function that migrates all the entries within a chunk call list_first_entry() on the respective lists without checking that the lists are not empty. This is incorrect usage of the API, which leads to the following warning [1]. Fix by returning if the lists are empty as there is nothing to migrate in this case. [1] WARNING: CPU: 0 PID: 6437 at drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c:1266 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0> Modules linked in: CPU: 0 PID: 6437 Comm: kworker/0:37 Not tainted 6.9.0-rc3-custom-00883-g94a65f079ef6 #39 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:mlxsw_sp_acl_tcam_vchunk_migrate_all+0x1f1/0x2c0 [...] Call Trace: <TASK> mlxsw_sp_acl_tcam_vregion_rehash_work+0x6c/0x4a0 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> Fixes: 6f9579d4 ("mlxsw: spectrum_acl: Remember where to continue rehash migration") Signed-off-by:
-
Ido Schimmel authored
As previously explained, the rehash delayed work migrates filters from one region to another. This is done by iterating over all chunks (all the filters with the same priority) in the region and in each chunk iterating over all the filters. When the work runs out of credits it stores the current chunk and entry as markers in the per-work context so that it would know where to resume the migration from the next time the work is scheduled. Upon error, the chunk marker is reset to NULL, but without resetting the entry markers despite being relative to it. This can result in migration being resumed from an entry that does not belong to the chunk being migrated. In turn, this will eventually lead to a chunk being iterated over as if it is an entry. Because of how the two structures happen to be defined, this does not lead to KASAN splats, but to warnings such as [1]. Fix by creating a helper that resets all the markers and call it from all the places the currently only reset the chunk marker. For good measures also call it when starting a completely new rehash. Add a warning to avoid future cases. [1] WARNING: CPU: 7 PID: 1076 at drivers/net/ethernet/mellanox/mlxsw/core_acl_flex_keys.c:407 mlxsw_afk_encode+0x242/0x2f0 Modules linked in: CPU: 7 PID: 1076 Comm: kworker/7:24 Tainted: G W 6.9.0-rc3-custom-00880-g29e61d91b77b #29 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:mlxsw_afk_encode+0x242/0x2f0 [...] Call Trace: <TASK> mlxsw_sp_acl_atcam_entry_add+0xd9/0x3c0 mlxsw_sp_acl_tcam_entry_create+0x5e/0xa0 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x109/0x290 mlxsw_sp_acl_tcam_vregion_rehash_work+0x6c/0x470 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 </TASK> Fixes: 6f9579d4 ("mlxsw: spectrum_acl: Remember where to continue rehash migration") Signed-off-by:
-
Ido Schimmel authored
The rehash delayed work migrates filters from one region to another. This is done by iterating over all chunks (all the filters with the same priority) in the region and in each chunk iterating over all the filters. If the migration fails, the code tries to migrate the filters back to the old region. However, the rollback itself can also fail in which case another migration will be erroneously performed. Besides the fact that this ping pong is not a very good idea, it also creates a problem. Each virtual chunk references two chunks: The currently used one ('vchunk->chunk') and a backup ('vchunk->chunk2'). During migration the first holds the chunk we want to migrate filters to and the second holds the chunk we are migrating filters from. The code currently assumes - but does not verify - that the backup chunk does not exist (NULL) if the currently used chunk does not reference the target region. This assumption breaks when we are trying to rollback a rollback, resulting in the backup chunk being overwritten and leaked [1]. Fix by not rolling back a failed rollback and add a warning to avoid future cases. [1] WARNING: CPU: 5 PID: 1063 at lib/parman.c:291 parman_destroy+0x17/0x20 Modules linked in: CPU: 5 PID: 1063 Comm: kworker/5:11 Tainted: G W 6.9.0-rc2-custom-00784-gc6a05c468a0b #14 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:parman_destroy+0x17/0x20 [...] Call Trace: <TASK> mlxsw_sp_acl_atcam_region_fini+0x19/0x60 mlxsw_sp_acl_tcam_region_destroy+0x49/0xf0 mlxsw_sp_acl_tcam_vregion_rehash_work+0x1f1/0x470 process_one_work+0x151/0x370 worker_thread+0x2cb/0x3e0 kthread+0xd0/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> Fixes: 84350051 ("mlxsw: spectrum_acl: Do rollback as another call to mlxsw_sp_acl_tcam_vchunk_migrate_all()") Signed-off-by: -
Ido Schimmel authored
In the rare cases when the device resources are exhausted it is likely that the rehash delayed work will fail. An error message will be printed whenever this happens which can be overwhelming considering the fact that the work is per-region and that there can be hundreds of regions. Fix by rate limiting the error message. Fixes: e5e7962e ("mlxsw: spectrum_acl: Implement region migration according to hints") Signed-off-by:
-
Ido Schimmel authored
The rehash delayed work migrates filters from one region to another according to the number of available credits. The migrated from region is destroyed at the end of the work if the number of credits is non-negative as the assumption is that this is indicative of migration being complete. This assumption is incorrect as a non-negative number of credits can also be the result of a failed migration. The destruction of a region that still has filters referencing it can result in a use-after-free [1]. Fix by not destroying the region if migration failed. [1] BUG: KASAN: slab-use-after-free in mlxsw_sp_acl_ctcam_region_entry_remove+0x21d/0x230 Read of size 8 at addr ffff8881735319e8 by task kworker/0:31/3858 CPU: 0 PID: 3858 Comm: kworker/0:31 Tainted: G W 6.9.0-rc2-custom-00782-gf2275c2157d8 #5 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work Call Trace: <TASK> dump_stack_lvl+0xc6/0x120 print_report+0xce/0x670 kasan_report+0xd7/0x110 mlxsw_sp_acl_ctcam_region_entry_remove+0x21d/0x230 mlxsw_sp_acl_ctcam_entry_del+0x2e/0x70 mlxsw_sp_acl_atcam_entry_del+0x81/0x210 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x3cd/0xb50 mlxsw_sp_acl_tcam_vregion_rehash_work+0x157/0x1300 process_one_work+0x8eb/0x19b0 worker_thread+0x6c9/0xf70 kthread+0x2c9/0x3b0 ret_from_fork+0x4d/0x80 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 174: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x8f/0xa0 __kmalloc+0x19c/0x360 mlxsw_sp_acl_tcam_region_create+0xdf/0x9c0 mlxsw_sp_acl_tcam_vregion_rehash_work+0x954/0x1300 process_one_work+0x8eb/0x19b0 worker_thread+0x6c9/0xf70 kthread+0x2c9/0x3b0 ret_from_fork+0x4d/0x80 ret_from_fork_asm+0x1a/0x30 Freed by task 7: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 poison_slab_object+0x102/0x170 __kasan_slab_free+0x14/0x30 kfree+0xc1/0x290 mlxsw_sp_acl_tcam_region_destroy+0x272/0x310 mlxsw_sp_acl_tcam_vregion_rehash_work+0x731/0x1300 process_one_work+0x8eb/0x19b0 worker_thread+0x6c9/0xf70 kthread+0x2c9/0x3b0 ret_from_fork+0x4d/0x80 ret_from_fork_asm+0x1a/0x30 Fixes: c9c9af91 ("mlxsw: spectrum_acl: Allow to interrupt/continue rehash work") Signed-off-by:
-
Ido Schimmel authored
The rule activity update delayed work periodically traverses the list of configured rules and queries their activity from the device. As part of this task it accesses the entry pointed by 'ventry->entry', but this entry can be changed concurrently by the rehash delayed work, leading to a use-after-free [1]. Fix by closing the race and perform the activity query under the 'vregion->lock' mutex. [1] BUG: KASAN: slab-use-after-free in mlxsw_sp_acl_tcam_flower_rule_activity_get+0x121/0x140 Read of size 8 at addr ffff8881054ed808 by task kworker/0:18/181 CPU: 0 PID: 181 Comm: kworker/0:18 Not tainted 6.9.0-rc2-custom-00781-gd5ab772d32f7 #2 Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019 Workqueue: mlxsw_core mlxsw_sp_acl_rule_activity_update_work Call Trace: <TASK> dump_stack_lvl+0xc6/0x120 print_report+0xce/0x670 kasan_report+0xd7/0x110 mlxsw_sp_acl_tcam_flower_rule_activity_get+0x121/0x140 mlxsw_sp_acl_rule_activity_update_work+0x219/0x400 process_one_work+0x8eb/0x19b0 worker_thread+0x6c9/0xf70 kthread+0x2c9/0x3b0 ret_from_fork+0x4d/0x80 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 1039: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x8f/0xa0 __kmalloc+0x19c/0x360 mlxsw_sp_acl_tcam_entry_create+0x7b/0x1f0 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x30d/0xb50 mlxsw_sp_acl_tcam_vregion_rehash_work+0x157/0x1300 process_one_work+0x8eb/0x19b0 worker_thread+0x6c9/0xf70 kthread+0x2c9/0x3b0 ret_from_fork+0x4d/0x80 ret_from_fork_asm+0x1a/0x30 Freed by task 1039: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 poison_slab_object+0x102/0x170 __kasan_slab_free+0x14/0x30 kfree+0xc1/0x290 mlxsw_sp_acl_tcam_vchunk_migrate_all+0x3d7/0xb50 mlxsw_sp_acl_tcam_vregion_rehash_work+0x157/0x1300 process_one_work+0x8eb/0x19b0 worker_thread+0x6c9/0xf70 kthread+0x2c9/0x3b0 ret_from_fork+0x4d/0x80 ret_from_fork_asm+0x1a/0x30 Fixes: 2bffc532 ("mlxsw: spectrum_acl: Don't take mutex in mlxsw_sp_acl_tcam_vregion_rehash_work()") Signed-off-by:
-
Ido Schimmel authored
The purpose of the rehash delayed work is to reduce the number of masks (eRPs) used by an ACL region as the eRP bank is a global and limited resource. This is done in three steps: 1. Creating a new set of masks and a new ACL region which will use the new masks and to which the existing filters will be migrated to. The new region is assigned to 'vregion->region' and the region from which the filters are migrated from is assigned to 'vregion->region2'. 2. Migrating all the filters from the old region to the new region. 3. Destroying the old region and setting 'vregion->region2' to NULL. Only the second steps is performed under the 'vregion->lock' mutex although its comments says that among other things it "Protects consistency of region, region2 pointers". This is problematic as the first step can race with filter insertion from user space that uses 'vregion->region', but under the mutex. Fix by holding the mutex across the entirety of the delayed work and not only during the second step. Fixes: 2bffc532 ("mlxsw: spectrum_acl: Don't take mutex in mlxsw_sp_acl_tcam_vregion_rehash_work()") Signed-off-by:
-
Ido Schimmel authored
Region identifiers can be allocated both when user space tries to insert a new tc filter and when filters are migrated from one region to another as part of the rehash delayed work. There is no lock protecting the bitmap from which these identifiers are allocated from, which is racy and leads to bad parameter errors from the device's firmware. Fix by converting the bitmap to IDA which handles its own locking. For consistency, do the same for the group identifiers that are part of the same structure. Fixes: 2bffc532 ("mlxsw: spectrum_acl: Don't take mutex in mlxsw_sp_acl_tcam_vregion_rehash_work()") Reported-by:
Amit Cohen <amcohen@nvidia.com> Signed-off-by:
-
Hyunwoo Kim authored
Since kfree_rcu, which is called in the hlist_for_each_entry_rcu traversal of ovs_ct_limit_exit, is not part of the RCU read critical section, it is possible that the RCU grace period will pass during the traversal and the key will be free. To prevent this, it should be changed to hlist_for_each_entry_safe. Fixes: 11efd5cb ("openvswitch: Support conntrack zone limit") Signed-off-by:
Hyunwoo Kim <v4bel@theori.io> Reviewed-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
Aaron Conole <aconole@redhat.com> Link: https://lore.kernel.org/r/ZiYvzQN/Ry5oeFQW@v4bel-B760M-AORUS-ELITE-AXSigned-off-by:
-
- 24 Apr, 2024 8 commits
-
-
Bartosz Golaszewski authored
Any return value from gpiod_get_optional() other than a pointer to a GPIO descriptor or a NULL-pointer is an error and the driver should abort probing. That being said: commit 56d074d2 ("Bluetooth: hci_qca: don't use IS_ERR_OR_NULL() with gpiod_get_optional()") no longer sets power_ctrl_enabled on NULL-pointer returned by devm_gpiod_get_optional(). Restore this behavior but bail-out on errors. While at it: also bail-out on error returned when trying to get the "swctrl" GPIO. Reported-by:
Wren Turkal <wt@penguintechs.org> Reported-by:
Zijun Hu <quic_zijuhu@quicinc.com> Closes: https://lore.kernel.org/linux-bluetooth/1713449192-25926-2-git-send-email-quic_zijuhu@quicinc.com/ Fixes: 56d074d2 ("Bluetooth: hci_qca: don't use IS_ERR_OR_NULL() with gpiod_get_optional()") Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Tested-by:
Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
Chun-Yi Lee authored
Since the d883a466 be introduced in v6.4, bluetooth daemon got the following failed message of MGMT_OP_REMOVE_ADV_MONITOR command when controller is power-off: bluetoothd[20976]: src/adapter.c:reset_adv_monitors_complete() Failed to reset Adv Monitors: Failed> Normally this situation is happened when the bluetoothd deamon be started manually after system booting. Which means that bluetoothd received MGMT_EV_INDEX_ADDED event after kernel runs hci_power_off(). Base on doc/mgmt-api.txt, the MGMT_OP_REMOVE_ADV_MONITOR command can be used when the controller is not powered. This patch changes the code in remove_adv_monitor() to use hci_cmd_sync_submit() instead of hci_cmd_sync_queue(). Fixes: d883a466 ("Bluetooth: hci_sync: Only allow hci_cmd_sync_queue if running") Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Cc: Manish Mandlik <mmandlik@google.com> Cc: Archie Pusaka <apusaka@chromium.org> Cc: Miao-chen Chou <mcchou@chromium.org> Signed-off-by:
Chun-Yi Lee <jlee@suse.com> Signed-off-by:
-
Johan Hovold authored
Qualcomm ROME controllers can be registered from the Bluetooth line discipline and in this case the HCI UART serdev pointer is NULL. Add the missing sanity check to prevent a NULL-pointer dereference when setup() is called for a non-serdev controller. Fixes: e9b3e5b8 ("Bluetooth: hci_qca: only assign wakeup with serial port support") Cc: stable@vger.kernel.org # 6.2 Cc: Zhengping Jiang <jiangzp@google.com> Signed-off-by:
Johan Hovold <johan+linaro@kernel.org> Signed-off-by:
-
Johan Hovold authored
Qualcomm ROME controllers can be registered from the Bluetooth line discipline and in this case the HCI UART serdev pointer is NULL. Add the missing sanity check to prevent a NULL-pointer dereference when wakeup() is called for a non-serdev controller during suspend. Just return true for now to restore the original behaviour and address the crash with pre-6.2 kernels, which do not have commit e9b3e5b8 ("Bluetooth: hci_qca: only assign wakeup with serial port support") that causes the crash to happen already at setup() time. Fixes: c1a74160 ("Bluetooth: hci_qca: Add device_may_wakeup support") Cc: stable@vger.kernel.org # 5.13 Signed-off-by:
-
Sean Wang authored
hci_devcd_append() would free the skb on error so the caller don't have to free it again otherwise it would cause the double free of skb. Fixes: 0b701513 ("Bluetooth: btusb: mediatek: add MediaTek devcoredump support") Reported-by : Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by:
Sean Wang <sean.wang@mediatek.com> Signed-off-by:
-
Luiz Augusto von Dentz authored
These commands don't require the adapter to be up and running so don't use hci_cmd_sync_queue which would check that flag, instead use hci_cmd_sync_submit which would ensure mgmt_class_complete is set properly regardless if any command was actually run or not. Link: https://github.com/bluez/bluez/issues/809 Fixes: d883a466 ("Bluetooth: hci_sync: Only allow hci_cmd_sync_queue if running") Signed-off-by:
-
Johan Hovold authored
Qualcomm Bluetooth controllers may not have been provisioned with a valid device address and instead end up using the default address 00:00:00:00:5a:ad. This was previously believed to be due to lack of persistent storage for the address but it may also be due to integrators opting to not use the on-chip OTP memory and instead store the address elsewhere (e.g. in storage managed by secure world firmware). According to Qualcomm, at least WCN6750, WCN6855 and WCN7850 have on-chip OTP storage for the address. As the device type alone cannot be used to determine when the address is valid, instead read back the address during setup() and only set the HCI_QUIRK_USE_BDADDR_PROPERTY flag when needed. This specifically makes sure that controllers that have been provisioned with an address do not start as unconfigured. Reported-by:
Janaki Ramaiah Thota <quic_janathot@quicinc.com> Link: https://lore.kernel.org/r/124a7d54-5a18-4be7-9a76-a12017f6cce5@quicinc.com/ Fixes: 5971752d ("Bluetooth: hci_qca: Set HCI_QUIRK_USE_BDADDR_PROPERTY for wcn3990") Fixes: e668eb1e ("Bluetooth: hci_core: Don't stop BT if the BD address missing in dts") Fixes: 6945795b ("Bluetooth: fix use-bdaddr-property quirk") Cc: stable@vger.kernel.org # 6.5 Cc: Matthias Kaehlcke <mka@chromium.org> Signed-off-by:
-
Luiz Augusto von Dentz authored
The code shall always check if HCI_QUIRK_BROKEN_READ_ENC_KEY_SIZE has been set before attempting to use HCI_OP_READ_ENC_KEY_SIZE. Fixes: c569242c ("Bluetooth: hci_event: set the conn encrypted before conn establishes") Signed-off-by:
-
