- 24 Jul, 2020 3 commits
-
-
Ariel Levkovich authored
Retreive a hash value from the SKB and store it in the dissector key for future matching. Signed-off-by:
Ariel Levkovich <lariel@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Chi Song authored
An imbalanced TX indirection table causes netvsc to have low performance. This table is created and managed during runtime. To help better diagnose performance issues caused by imbalanced tables, it needs make TX indirection tables visible. Because TX indirection table is driver specified information, so display it via ethtool register dump. Signed-off-by:
Chi Song <chisong@microsoft.com> Reviewed-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
-
David Ahern authored
Randy reported compile failure when CONFIG_SYSCTL is not set/enabled: ERROR: modpost: "sysctl_vals" [drivers/net/vrf.ko] undefined! Fix by splitting out the sysctl init and cleanup into helpers that can be set to do nothing when CONFIG_SYSCTL is disabled. In addition, move vrf_strict_mode and vrf_strict_mode_change to above vrf_shared_table_handler (code move only) and wrap all of it in the ifdef CONFIG_SYSCTL. Update the strict mode tests to check for the existence of the /proc/sys entry. Fixes: 33306f1a ("vrf: add sysctl parameter for strict mode") Cc: Andrea Mayer <andrea.mayer@uniroma2.it> Reported-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
David Ahern <dsahern@kernel.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by:
-
- 23 Jul, 2020 37 commits
-
-
Vladimir Oltean authored
The purpose of this override is to give the user an indication of what the number of the CPU port is (in DSA, the CPU port is a hardware implementation detail and not a network interface capable of traffic). However, it has always failed (by design) at providing this information to the user in a reliable fashion. Prior to commit 3369afba ("net: Call into DSA netdevice_ops wrappers"), the behavior was to only override this callback if it was not provided by the DSA master. That was its first failure: if the DSA master itself was a DSA port or a switchdev, then the user would not see the number of the CPU port in /sys/class/net/eth0/phys_port_name, but the number of the DSA master port within its respective physical switch. But that was actually ok in a way. The commit mentioned above changed that behavior, and now overrides the master's ndo_get_phys_port_name unconditionally. That comes with problems of its own, which are worse in a way. The idea is that it's typical for switchdev users to have udev rules for consistent interface naming. These are based, among other things, on the phys_port_name attribute. If we let the DSA switch at the bottom to start randomly overriding ndo_get_phys_port_name with its own CPU port, we basically lose any predictability in interface naming, or even uniqueness, for that matter. So, there are reasons to let DSA override the master's callback (to provide a consistent interface, a number which has a clear meaning and must not be interpreted according to context), and there are reasons to not let DSA override it (it breaks udev matching for the DSA master). But, there is an alternative method for users to retrieve the number of the CPU port of each DSA switch in the system: $ devlink port pci/0000:00:00.5/0: type eth netdev swp0 flavour physical port 0 pci/0000:00:00.5/2: type eth netdev swp2 flavour physical port 2 pci/0000:00:00.5/4: type notset flavour cpu port 4 spi/spi2.0/0: type eth netdev sw0p0 flavour physical port 0 spi/spi2.0/1: type eth netdev sw0p1 flavour physical port 1 spi/spi2.0/2: type eth netdev sw0p2 flavour physical port 2 spi/spi2.0/4: type notset flavour cpu port 4 spi/spi2.1/0: type eth netdev sw1p0 flavour physical port 0 spi/spi2.1/1: type eth netdev sw1p1 flavour physical port 1 spi/spi2.1/2: type eth netdev sw1p2 flavour physical port 2 spi/spi2.1/3: type eth netdev sw1p3 flavour physical port 3 spi/spi2.1/4: type notset flavour cpu port 4 So remove this duplicated, unreliable and troublesome method. From this patch on, the phys_port_name attribute of the DSA master will only contain information about itself (if at all). If the users need reliable information about the CPU port they're probably using devlink anyway. Signed-off-by:
Vladimir Oltean <olteanv@gmail.com> Acked-by:
florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Vishal Kulkarni authored
In this test, loopback pkt is created and sent on default queue. The packet goes until the Multi Port Switch (MPS) just before the MAC and based on the specified channel number, it either goes outside the wire on one of the physical ports or looped back to Rx path by MPS. In this case, we're specifying loopback channel, instead of physical ports, so the packet gets looped back to Rx path, instead of getting transmitted on the wire. v3: - Modify commit message to include test details. v2: - Add only loopback self-test. Signed-off-by:
Vishal Kulkarni <vishal@chelsio.com> Acked-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
David S. Miller authored
Tom Parkin says: ==================== l2tp: further checkpatch.pl cleanups l2tp hasn't been kept up to date with the static analysis checks offered by checkpatch.pl. This patchset builds on the series "l2tp: cleanup checkpatch.pl warnings". It includes small refactoring changes which improve code quality and resolve a subset of the checkpatch warnings for the l2tp codebase. ==================== Reviewed-by:
James Chapman <jchapman@katalix.com> Signed-off-by:
-
Tom Parkin authored
Passing "sizeof(struct blah)" in kzalloc calls is less readable, potentially prone to future bugs if the type of the pointer is changed, and triggers checkpatch warnings. Tweak the kzalloc calls in l2tp which use this form to avoid the warning. Signed-off-by:
Tom Parkin <tparkin@katalix.com> Signed-off-by:
-
Tom Parkin authored
When creating an L2TP tunnel using the netlink API, userspace must either pass a socket FD for the tunnel to use (for managed tunnels), or specify the tunnel source/destination address (for unmanaged tunnels). Since source/destination addresses may be AF_INET or AF_INET6, the l2tp netlink code has conditionally compiled blocks to support IPv6. Rather than embedding these directly into l2tp_nl_cmd_tunnel_create (where it makes the code difficult to read and confuses checkpatch to boot) split the handling of address-related attributes into a separate function. Signed-off-by:
-
Tom Parkin authored
l2tp_nl_tunnel_send has conditionally compiled code to support AF_INET6, which makes the code difficult to follow and triggers checkpatch warnings. Split the code out into functions to handle the AF_INET v.s. AF_INET6 cases, which both improves readability and resolves the checkpatch warnings. Signed-off-by:
-
Tom Parkin authored
checkpatch warns about indentation and brace balancing around the conditionally compiled code for AF_INET6 support in l2tp_dfs_seq_tunnel_show. By adding another check on the socket address type we can make the code more readable while removing the checkpatch warning. Signed-off-by:
-
Tom Parkin authored
These checks are all simple and don't benefit from extra braces to clarify intent. Remove them for easier-reading code. Signed-off-by:
-
Tom Parkin authored
checkpatch warns about comparisons to NULL, e.g. CHECK: Comparison to NULL could be written "!rt" #474: FILE: net/l2tp/l2tp_ip.c:474: + if (rt == NULL) { These sort of comparisons are generally clearer and more readable the way checkpatch suggests, so update l2tp accordingly. Signed-off-by: -
Miaohe Lin authored
Use eth_zero_addr() to clear mac address insetad of memset(). Signed-off-by:
Miaohe Lin <linmiaohe@huawei.com> Signed-off-by:
-
Miaohe Lin authored
Use eth_zero_addr() to clear mac address insetad of memset(). Signed-off-by:
-
David S. Miller authored
Paolo Abeni says: ==================== mptcp: non backup subflows pre-reqs This series contains a bunch of MPTCP improvements loosely related to concurrent subflows xmit usage, currently under development. The first 3 patches are actually bugfixes for issues that will become apparent as soon as we will enable the above feature. The later patches improve the handling of incoming additional subflows, improving significantly the performances in stress tests based on a high new connection rate. ==================== Signed-off-by: -
Paolo Abeni authored
So that we can easily perform some basic PM-related adimission checks before creating the child socket. Reviewed-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Tested-by:
Christoph Paasch <cpaasch@apple.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Paolo Abeni authored
tcp_send_active_reset() is more prone to transient errors (memory allocation or xmit queue full): in stress conditions the kernel may drop the egress packet, and the client will be stuck. Reviewed-by:
-
Paolo Abeni authored
When syncookie are in use, the TCP stack may feed into subflow_syn_recv_sock() plain TCP request sockets. We can't access mptcp_subflow_request_sock-specific fields on such sockets. Explicitly check the rsk ops to do safe accesses. Reviewed-by:
-
Paolo Abeni authored
The mentioned function has several unneeded branches, handle each case - MP_CAPABLE, MP_JOIN, fallback - under a single conditional and drop quite a bit of duplicate code. Reviewed-by:
-
Paolo Abeni authored
Currently accepted msk sockets become established only after accept() returns the new sk to user-space. As MP_JOIN request are refused as per RFC spec on non fully established socket, the above causes mp_join self-tests instabilities. This change lets the msk entering the established status as soon as it receives the 3rd ack and propagates the first subflow fully established status on the msk socket. Finally we can change the subflow acceptance condition to take in account both the sock state and the msk fully established flag. Reviewed-by:
-
Paolo Abeni authored
In the unlikely event of a failure at connect time, we currently clear the request_mptcp flag - so that the MPC handshake is not started at all, but the msk is not explicitly marked as fallback. This would lead to later insertion of wrong DSS options in the xmitted packets, in violation of RFC specs and possibly fooling the peer. Fixes: e1ff9e82 ("net: mptcp: improve fallback to TCP") Reviewed-by:
-
Paolo Abeni authored
When updating a partially acked data fragment, we actually corrupt it. This is irrelevant till we send data on a single subflow, as retransmitted data, if any are discarded by the peer as duplicate, but it will cause data corruption as soon as we will start creating non backup subflows. Reviewed-by:
-
Paolo Abeni authored
Currently we do not init the subflow write sequence for MP_JOIN subflows. This will cause bad mapping being generated as soon as we will use non backup subflow. Reviewed-by:
-
Jakub Kicinski authored
Check MC_CMD_DRV_ATTACH_EXT_OUT_FLAG_TRUSTED, before setting the info, which will hopefully protect us from -EPERM errors the previous code was gracefully ignoring. Ed reports this is not the 100% correct bit, but it's the best approximation we have. Shared code reports the port information back to user space, so we really want to know what was added and what failed. Ignoring -EPERM is not an option. The driver does not call udp_tunnel_get_rx_info(), so its own management of table state is not really all that problematic, we can leave it be. This allows the driver to continue with its copious table syncing, and matching the ports to TX frames, which it will reportedly do one day. Leave the feature checking in the callbacks, as the device may remove the capabilities on reset. Inline the loop from __efx_ef10_udp_tnl_lookup_port() into efx_ef10_udp_tnl_has_port(), since it's the only caller now. With new infra this driver gains port replace - when space frees up in a full table a new port will be selected for offload. Plus efx will no longer sleep in an atomic context. v2: - amend the commit message about TRUSTED not being 100% - add TUNNEL_ENCAP_UDP_PORT_ENTRY_INVALID to mark unsed entries Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
-
David S. Miller authored
Alexander Lobakin says: ==================== qed, qede: improve chain API and add XDP_REDIRECT support This series adds missing XDP_REDIRECT case handling in QLogic Everest Ethernet driver with all necessary prerequisites and ops. QEDE Tx relies heavily on chain API, so make sure it is in its best at first. v2 (from [1]): - add missing includes to #003 to pass the build on Alpha; - no functional changes. [1] https://lore.kernel.org/netdev/20200722155349.747-1-alobakin@marvell.com/ ==================== Signed-off-by:
-
Alexander Lobakin authored
Add XDP_REDIRECT case handling and the corresponding NDO to support redirecting XDP frames. This also includes registering driver memory model (currently order-0 page mode) in BPF subsystem. The total number of XDP queues is usually 1:1 with Rx ones. Signed-off-by:
Alexander Lobakin <alobakin@marvell.com> Signed-off-by:
Igor Russkikh <irusskikh@marvell.com> Signed-off-by:
Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by:
-
Alexander Lobakin authored
Current XDP Tx logic is suboptimal and can't be reused for XDP_REDIRECT path. Make qede_xdp_{tx_int,xmit}() more universal and effective in general to allow future expanding. Misc: use unlikely() hints where appropriate and replace "fallthrough" comments with pseudo-keywords. Signed-off-by: -
Alexander Lobakin authored
Correct the indentation of net_device_ops declarations for fancier look. Signed-off-by:
-
Alexander Lobakin authored
Make the file more readable and easier for adding new fields. Misc: use IFNAMSIZ and netdev_name() instead of sizeof_field() and direct net_device::name dereferencing. Signed-off-by:
-
Alexander Lobakin authored
Add reverse-variants of qed_chain_get_elem_left{,u32}() to be able to know current chain occupation. They will be used in the upcoming qede XDP_REDIRECT code. They share most of the logics with the mentioned ones, so were reused to collapse the latters. Signed-off-by: -
Alexander Lobakin authored
Constify chain pointers and refactor qed_chain_get_elem_left{,u32}() a bit. Signed-off-by: -
Alexander Lobakin authored
Extend current infrastructure to store chain page size in a struct and use it in all functions instead of fixed QED_CHAIN_PAGE_SIZE. Its value remains the default one, but can be overridden in qed_chain_init_params before chain allocation. Signed-off-by:
-
Alexander Lobakin authored
To simplify qed_chain_alloc() prototype and call sites, introduce struct qed_chain_init_params to specify chain params, and pass a pointer to filled struct to the actual qed_chain_alloc() instead of a long list of separate arguments. Signed-off-by:
-
Alexander Lobakin authored
Fill PBL table parameters for chains with an external PBL data earlier on qed_chain_init_params() rather than on allocation itself. This simplifies allocation code and allows to extend struct ext_pbl for other chain types. Signed-off-by:
-
Alexander Lobakin authored
qed_chain_init*() are used in one file/place on "cold" path only, so they can be uninlined and moved next to the call sites. Signed-off-by:
-
Alexander Lobakin authored
PBL chain elements are actually DMA addresses stored in __le64, but currently their size is hardcoded to 8, and DMA addresses are assigned via cast to variable-sized dma_addr_t without any bitwise conversions. Change the type of pbl_virt array to match the actual one, add a new field to store the size of allocated DMA memory and sanitize elements assignment. Misc: give more logic names to the members of qed_chain::pbl_sp embedded struct. Signed-off-by:
-
Alexander Lobakin authored
Zero-initialize chain on qed_chain_free(), so it couldn't be freed twice and provoke undefined behaviour. Signed-off-by:
-
Alexander Lobakin authored
Move chain allocation/freeing functions to a new file to not mix it with hardware-related code. Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
Alexander Lobakin authored
List one entry per line and sort them alphabetically to simplify the addition of the new ones. Signed-off-by:
-
Alexander Lobakin authored
Reformat structs and macros definitions a bit prior to making functional changes. Signed-off-by:
-
