- 28 Mar, 2023 15 commits
-
-
Khadija Kamran authored
Balance if/else braces as recommended by checkpatch.pl Signed-off-by:
Khadija Kamran <kamrankhadijadj@gmail.com> Link: https://lore.kernel.org/r/ZCISGaFELBfDyGRT@khadija-virtual-machineSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Khadija Kamran authored
Linux kernel coding style uses '*/' on a separate line at the end of multi line comments. Fix block comments by moving '*/' at the end of block comments on a separate line as reported by checkpatch.pl script. Signed-off-by:
-
Khadija Kamran authored
Linux kernel coding style for block comments uses a column of '*' on the left side. Fix block comment by adding '*' on subsequent lines as reported by checkatch.pl script. Signed-off-by:
-
Khadija Kamran authored
Remove all of the commented out code lines as they are not being used and can be brought back in the future if they are ever needed again. Signed-off-by:
-
Khadija Kamran authored
Remove the change history information as it is not required in the comments. Signed-off-by:
-
Philipp Hortmann authored
Remove WIRELESS_MODE_N_5G from equations as it is not supported by hardware and to improve readability. Signed-off-by:
Philipp Hortmann <philipp.g.hortmann@gmail.com> Link: https://lore.kernel.org/r/fdefd4d706493fa3f080550d31eb5bea3f4e1a7e.1679949171.git.philipp.g.hortmann@gmail.comSigned-off-by:
-
Philipp Hortmann authored
Remove WIRELESS_MODE_N_5G and WIRELESS_MODE_A as those are not supported by hardware and to improve readability. Signed-off-by:
-
Philipp Hortmann authored
Remove WIRELESS_MODE_N_5G and WIRELESS_MODE_A as those are not supported by hardware and to improve readability. Combine WIRELESS_MODE_G with default to improve readability. Signed-off-by:
-
Philipp Hortmann authored
Equation (support_mode & WIRELESS_MODE_N_24G) will always be true. Remove resulting dead code. Signed-off-by:
-
Philipp Hortmann authored
Remove wireless_mode == WIRELESS_MODE_N_5G as 5G is not supported by hardware and to improve readability. Signed-off-by:
-
Philipp Hortmann authored
Remove _rtl92e_get_supported_wireless_mode to improve readability. Signed-off-by:
-
Philipp Hortmann authored
Remove rtl92e_config_phy to improve readability. Signed-off-by:
-
Sumitra Sharma authored
Remove the extra blank line in accordance with the Linux kernel coding-style regulations. These issues were reported by checkpatch.pl "CHECK: Please don't use multiple blank lines" Signed-off-by:
Sumitra Sharma <sumitraartsy@gmail.com> Link: https://lore.kernel.org/r/20230327171653.GA188371@sumitra.comSigned-off-by:
-
Sumitra Sharma authored
Splitting function header to multiple lines because of 80 characters per line limit, results in ending the function call line with '('. This leads to CHECK reported by checkpatch.pl Move the first parameter right after the '(' in the function call line. Align the rest of the parameters to the opening parenthesis. Signed-off-by: -
Nuno Sá authored
As stated in the device datasheet [1], bits a0 and a1 have to be set to 1 for the configuration mode. [1]: https://www.analog.com/media/en/technical-documentation/data-sheets/ad2s1210.pdf Fixes: b19e9ad5 ("staging:iio:resolver:ad2s1210 general driver cleanup") Cc: stable <stable@kernel.org> Signed-off-by:
Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20230327145414.1505537-1-nuno.sa@analog.comSigned-off-by:
-
- 26 Mar, 2023 1 commit
-
-
Sumitra Sharma authored
Convert 'pwm_chip_to_gb_pwm_chip' from a macro to a static inline function, to make the relevant types apparent in the definition and to benefit from the type checking performed by the compiler at call sites. Signed-off-by:
-
- 25 Mar, 2023 24 commits
-
-
Michael Straube authored
The field rf_type of struct r8192_priv is always RF_1T2R and only used in one place. Use RF_1T2R directly there and remove rf_type from struct r8192_priv. Signed-off-by:
Michael Straube <straube.linux@gmail.com> Tested-by:
-
Michael Straube authored
The value of priv->rf_type is always RF_1T2R. Remove if statements that check for priv->rf_type == RF_1T2R and remove resulting dead code. Signed-off-by:
-
Michael Straube authored
At this point the value of priv->rf_type is RF_1T2R already. Setting it again is redundant and can be removed. Signed-off-by:
-
Michael Straube authored
Remove RTL819X_DEFAULT_RF_TYPE and use RF_1T2R directly to make follow up patches, which will remove priv->rf_type, easier to review. Signed-off-by:
-
Abhirup Deb authored
Replace the "<<" operator with BIT macro, in accordance to the checkpatch.pl script and Linux kernel coding-style guidelines. Signed-off-by:
Abhirup Deb <abhirupdeb@linux.vnet.ibm.com> Link: https://lore.kernel.org/r/ZBipKh/e2lK3YcQr@li-27defe4c-32e1-11b2-a85c-e202e9981075.ibm.comSigned-off-by:
-
Sumitra Sharma authored
Convert 'gb_audio_manager_module' from a macro to a static inline function, to make the relevant types apparent in the definition and to benefit from the type checking performed by the compiler at call sites. Signed-off-by:
-
Sumitra Sharma authored
Convert 'gpio_chip_to_gb_gpio_controller' from a macro to a static inline function, to make the relevant types apparent in the definition and to benefit from the type checking performed by the compiler at call sites. Signed-off-by:
-
Michael Straube authored
Remove the function hal_btcoex_SetChipType() as it does nothing and produces the following gcc warning when compiling with W=1. drivers/staging/rtl8723bs/hal/hal_btcoex.c:1182:30: warning: variable 'pHalData' set but not used [-Wunused-but-set-variable] 1182 | struct hal_com_data *pHalData; | ^~~~~~~~ Signed-off-by:Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230324084334.12183-1-straube.linux@gmail.comSigned-off-by:
-
Menna Mahmoud authored
Remove unnecessary blank line before struct as reported by checkpatch: " CHECK: Please don't use multiple blank lines " Signed-off-by:
Menna Mahmoud <eng.mennamahmoud.mm@gmail.com> Acked-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230322113735.31214-1-eng.mennamahmoud.mm@gmail.comSigned-off-by:
-
Philipp Hortmann authored
priv->rf_chip is initialized to RF_8256 and not used. Remove initialization, variable and enum as it is dead code. Signed-off-by:
-
Philipp Hortmann authored
priv->rf_chip is initialized to RF_8256 and never changed. Remove condition in function _rtl92e_get_channel_map as it is dead code. Signed-off-by:
-
Philipp Hortmann authored
priv->rf_chip is initialized to RF_8256 and never changed. Remove condition in function _rtl92e_get_supported_wireless_mode as it is dead code. Signed-off-by:
-
Philipp Hortmann authored
priv->rf_chip is initialized to RF_8256 and never changed. Remove conditions in function _rtl92e_set_rf_power_state as those are dead code. Removed unnecessary blank lines to shorten code. Signed-off-by:
-
Philipp Hortmann authored
priv->rf_chip is initialized to RF_8256 and never changed. Remove conditions in function _rtl92e_set_bw_mode_work_item as those are dead code. Signed-off-by:
-
Philipp Hortmann authored
priv->rf_chip is initialized to RF_8256 and never changed. Remove condition in function _rtl92e_phy_switch_channel_step as it is dead code. Signed-off-by:
-
Philipp Hortmann authored
priv->rf_chip is initialized to RF_8256 and never changed. Remove condition in function _rtl92e_set_tx_power_level as it is dead code. Signed-off-by:
-
Philipp Hortmann authored
priv->rf_chip is initialized to RF_8256 and never changed. Remove condition in function rtl92e_config_phy as it is dead code. Signed-off-by:
-
Philipp Hortmann authored
priv->rf_chip is initialized to RF_8256 and never changed. Remove condition in function rtl92e_set_tx_power as it is dead code. Signed-off-by:
-
Philipp Hortmann authored
priv->rf_chip is initialized to RF_8256 and never changed. Remove conditions in function _rtl92e_phy_rf_write as those are dead code. Signed-off-by:
-
Philipp Hortmann authored
priv->rf_chip is initialized to RF_8256 and never changed. Remove conditions in function _rtl92e_phy_rf_read as those are dead code. Signed-off-by:
-
Khadija Kamran authored
Remove unnecessary blank lines after an open brace to adhere to the Linux kernel coding-style guidelines. These issues are reported by checkpatch.pl "CHECK: Blank lines aren't necessary after an open brace '{'" Signed-off-by: -
Khadija Kamran authored
Use spaces around binary operators as suggested by Linux kernel coding style guidelines. Issues reported by checkpatch.pl for the following binary operators: + , - , * , | , << Signed-off-by:
-
Khadija Kamran authored
Add blank lines after declarations to adhere to the Linux kernel coding-style guidelines. These issues are reported by checkpatch.pl "CHECK: Please use a blank line after function/struct/union/enum declarations" Signed-off-by:
-
Khadija Kamran authored
Remove the extra blank line in accordance with the Linux kernel coding-style regulations. These issues were reported by checkpatch.pl "CHECK: Please don't use multiple blank lines" Signed-off-by:
-
