- 17 Aug, 2007 13 commits
-
-
David Gibson authored
This patch contains a handful of small fixes to allow the Ebony's flash to be exposed as MTD devices via the physmap_of driver. Specifically it: - Makes a small addition to the device tree and zImage wrapper to record the correct address for the flash in the device tree based on the board switches as reported via an FPGA register. - Prohibits building the old hard-coded "Ebony" flash map on arch/powerpc kernels, in favour of using physmap_of's device tree based approach. - Enables MTD and physmap_of in the Ebony defconfig. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Jesper Juhl authored
This removes several duplicate includes from arch/powerpc/. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Jon Loeliger authored
Signed-off-by: Jon Loeliger <jdl@freescale.com> Acked-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Jon Loeliger authored
Signed-off-by: Jon Loeliger <jdl@freescale.com> Acked-by: Vitaly Bordug <vitb@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Jon Loeliger authored
Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Linas Vepstas authored
Gather bridge-specific data on EEH events. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> ---- arch/powerpc/platforms/pseries/eeh.c | 27 ++++++++++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-) Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Linas Vepstas authored
The EEH code needs to ignore PCI bridges; sort-of. It was ignoring them in the wrong place, and thus failing to set up the PCI_DN(dn)->pcidev pointer. Imprudent dereferencing of this pointer would lead to a crash on cards with bridges. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> ---- arch/powerpc/platforms/pseries/eeh_cache.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Linas Vepstas authored
Print return code to print message. Also fix whitespace. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> ---- arch/powerpc/platforms/pseries/eeh.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Ishizaki Kou authored
Fix warnings about section mismatch. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Ishizaki Kou authored
There are some variables and functions that we should place in init section. And this patch changes some '__devinit' to '__init', because the device is platform device and not hot-pluggable. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Ishizaki Kou authored
Fix following warning: WARNING: vmlinux.o(.text+0x45fd4): Section mismatch: reference to .init.text:.early_serial_txx9_setup (between '.txx9_serial_init' and '.txx9_serial_config') Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Ishizaki Kou authored
Fix following warnings: WARNING: vmlinux.o(.text+0x44ad0): Section mismatch: reference to .init.text:.__alloc_bootmem (between '.celleb_setup_phb' and '.celleb_fake_pci_write_config') WARNING: vmlinux.o(.text+0x44dd8): Section mismatch: reference to .init.text:.free_bootmem (between '.celleb_setup_phb' and '.celleb_fake_pci_write_config') Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Ilpo Järvinen authored
A similar fix to netfilter from Eric Dumazet inspired me to look around a bit by using some grep/sed stuff as looking for this kind of bugs seemed easy to automate. This is one of them I found where it looks like this semicolon is not valid. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
- 15 Aug, 2007 5 commits
-
-
Geert Uytterhoeven authored
Fix probing of PS3 storage devices: in the success case, we should set `error' to zero, not `result'. Without this patch no storage devices are found. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Roland McGrath authored
ppc64 does the unusual thing of using #include on a compiler-generated assembly file (lparmap.s) from an assembly source file (head_64.S). This runs afoul of my recent patch to pass -gdwarf2 to the assembler under CONFIG_DEBUG_INFO. This patch avoids the problem by disabling DWARF generation (-g0) when producing lparmap.s. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
David Gibson authored
The 440 family of processors don't have a tlbie instruction. So, we implement TLB invalidates by explicitly searching the TLB with tlbsx., then clobbering the relevant entry, if any. Unfortunately the PID for the search needs to be stored in the MMUCR register, which is also used by the TLB miss handler. Interrupts were enabled in _tlbie(), so an interrupt between loading the MMUCR and the tlbsx could cause incorrect search results, and thus a failure to invalide TLB entries which needed to be invalidated. This fixes the problem in both arch/ppc and arch/powerpc by inhibiting interrupts (even critical and debug interrupts) across the relevant instructions. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Becky Bruce authored
AFAICT, nobody is using ft_ordered(), and it causes a build warning to be generated. This patch cleans that up by removing the function and the commented-out code that calls it. Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Jeremy Kerr authored
At present, spu_create with an invalid neighbo(u)r will return -ENOSYS, not -EBADF, but only when spufs.o is built as a module. This change adds the appropriate errno, making the behaviour the same as the built-in case. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
- 14 Aug, 2007 22 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixesLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes: [GFS2] Revert remounting w/o acl option leaves acls enabled [GFS2] Fix setting of inherit jdata attr [GFS2] Fix incorrect error path in prepare_write() [GFS2] Fix incorrect return code in rgrp.c [GFS2] soft lockup in rgblk_search [GFS2] soft lockup detected in databuf_lo_before_commit [DLM] fix basts for granted PR waiting CW [DLM] More othercon fixes [DLM] Fix memory leak in dlm_add_member() when dlm_node_weight() returns less than zero [DLM] zero unused parts of sockaddr_storage [DLM] fix NULL ls usage [DLM] Clear othercon pointers when a connection is closed
-
git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds authored
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: i2c-s3c2410: Build fix i2c/menelaus: Build fix i2c-mv64xxx: Reinitialize hw and driver on I2C bus hang i2c-mpc: Don't disable I2C module on stop condition i2c-iop3xx: Set I2C_CLASS_HWMON to adapter class i2c/isp1301_omap: Build fixes, whitespace i2c-mpc: Pass correct dev_id to free_irq on error path i2c-i801: Typo: erroneous
-
Ben Dooks authored
Fixup the include files after the arch moves that where included in 2.6.23. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
David Brownell authored
Fix Menelaus build error, and remove needless "#define DEBUG". Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Dale Farnsworth authored
Under certain conditions, the mv64xxx I2C bus can hang preventing further operation. To make the driver more robust, we now reset the I2C hardware and the driver state machine when such hangs are detected. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Acked-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Domen Puncer authored
Disabling module on stop doesn't work on some CPUs (ie. mpc8241, as reported by Guennadi Liakhovetski), so remove that. Disable I2C module on errors/interrupts to prevent it from locking up on mpc5200b. Signed-off-by: Domen Puncer <domen.puncer@telargo.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Arnaud Patard authored
In order to be able to use sensors on the IOP3xx SoCs, one needs to set the adapter class to I2C_CLASS_HWMON. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
David Brownell authored
Build fixes for isp1301_omap driver. I think an earlier version of this must have gotten lost somewhere, or maybe it only went into the Linux-OMAP tree. Also, some whitespace fixes to bring this more into sync with the version of this found in the Linux-OMAP tree. (That version has updates for the OTG controller on the OMAP 1710 which break that functionality on OMAP 161x boards like the H2, so merging all of it is not currently an option.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Scott Wood authored
Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Jean Delvare authored
Signed-off-by: Jean Delvare <khali@linux-fr.org>
-
Linus Torvalds authored
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [IPVS]: Use IP_VS_WAIT_WHILE when encessary. [NET]: Share correct feature code between bridging and bonding [ATM] drivers/atm/iphase.c: mostly kmalloc + memset conversion to kzalloc [IRDA] irda-usb.c: mostly kmalloc + memset conversion to k[cz]alloc [WAN] drivers/net/wan/hdlc_fr.c: kmalloc + memset conversion to kzalloc [DCCP]: fix memory leak and clean up style - dccp_feat_empty_confirm() [DCCP]: fix theoretical ccids_{read,write}_lock() race [XFRM]: Clean up duplicate includes in net/xfrm/ [TIPC]: Clean up duplicate includes in net/tipc/ [SUNRPC]: Clean up duplicate includes in net/sunrpc/ [PKT_SCHED]: Clean up duplicate includes in net/sched/ [IPV6]: Clean up duplicate includes in net/ipv6/ [IPV4]: Clean up duplicate includes in net/ipv4/ [ATM]: Clean up duplicate includes in net/atm/ [ATM]: Clean up duplicate includes in drivers/atm/ [IPCONFIG]: ip_auto_config fix [ATM]: fore200e_param_bs_queue() must be __devinit
-
Linus Torvalds authored
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: e1000: Add device IDs of new 82571 board variants xen-netfront: Avoid deref'ing skbafter it is potentially freed. 3c59x maintainer 3c59x: fix duplex configuration natsemi: fix netdev error acounting ax88796 printk fixes myri10ge: Use the pause counter to avoid a needless device reset via-rhine: disable rx_copybreak on archs that don't allow unaligned DMA access
-
Steven Whitehouse authored
This reverts commit 569a7b6c. The code was correct originally. The default setting for ACLs after a remount should be to be the same as before the remount. Signed-off-by: Abhijith Das <adas@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
-
Steven Whitehouse authored
Due to a mix up between the jdata attribute and inherit jdata attribute it has not been possible to set the inherit jdata attribute on directories. This is now fixed and the ioctl will report the inherit jdata attribute for directories rather than the jdata attribute as it did previously. This stems from our need to have the one bit in the ioctl attr flags mean two different things according to whether the underlying inode is a directory or not. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
-
Steven Whitehouse authored
The error path in prepare_write() was incorrect in the (very rare) event that the transaction fails to start. The following prevents a NULL pointer dereference, Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
-
Steven Whitehouse authored
The following patch fixes a bug where 0 was being used as a return code to indicate "nothing to do" when in fact 0 was a valid block location which might be returned by the function. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
-
Bob Peterson authored
This patch seems to fix the problem described in bugzilla bug 246114. It was written by Steve Whitehouse with some tweaking by me. The code was looping in the relatively new section of code designed to search for and reuse unlinked inodes. In cases where it was finding an appropriate inode to reuse, it was looping around and finding the same block over and over because a "<=" check should have been a "<" when comparing the goal block to the last unlinked block found. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
-
Bob Peterson authored
This is part 2 of the patch for bug #245832, part 1 of which is already in the git tree. The problem was that sdp->sd_log_num_databuf was not always being protected by the gfs2_log_lock spinlock, but the sd_log_le_databuf (which it is supposed to reflect) was protected. That meant there was a timing window during which gfs2_log_flush called databuf_lo_before_commit and the count didn't match what was really on the linked list in that window. So when it ran out of items on the linked list, it decremented total_dbuf from 0 to -1 and thus never left the "while(total_dbuf)" loop. The solution is to protect the variable sdp->sd_log_num_databuf so that the value will always match the contents of the linked list, and therefore the number will never go negative, and therefore, the loop will be exited properly. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
-
David Teigland authored
Fix a long standing bug where a blocking callback would be missed when there's a granted lock in PR mode and waiting locks in both PR and CW modes (and the PR lock was added to the waiting queue before the CW lock). The logic simply compared the numerical values of the modes to determine if a blocking callback was required, but in the one case of PR and CW, the lower valued CW mode blocks the higher valued PR mode. We just need to add a special check for this PR/CW case in the tests that decide when a blocking callback is needed. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
-
Patrick Caulfield authored
The last patch to clean out 'othercon' structures only fixed half the problem. The attached addresses the other situations too, and fixes bz#238490 Signed-Off-By: Patrick Caulfield <pcaulfie@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
-
Jesper Juhl authored
There's a memory leak in fs/dlm/member.c::dlm_add_member(). If "dlm_node_weight(ls->ls_name, nodeid)" returns < 0, then we'll return without freeing the memory allocated to the (at that point yet unused) 'memb'. This patch frees the allocated memory in that case and thus avoids the leak. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
-
Patrick Caulfield authored
When we build a sockaddr_storage for an IP address, clear the unused parts as they could be used for node comparisons. I have seen this occasionally make sctp connections fail. Signed-Off-By: Patrick Caulfield <pcaulfie@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
-