By re-arranging the code, 'ret' can be removed from this
function.
Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

By re-arranging the code, 'ret' can be removed from this
function.
Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

'rx' is not used in this function. Remove it.
Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Remove the driver as it hasn't been cleaned up and it doesn't look like
anyone is going to work on it anymore. This can be reverted if someone
wants to work to fix the remaining issues the driver has.
Signed-off-by: Kristina Martšenko <kristina.martsenko@gmail.com>
Cc: Bob Beers <bob.beers@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the driver as it hasn't been cleaned up and it doesn't look like
anyone is going to work on it anymore. This can be reverted if someone
wants to work to fix the remaining issues the driver has.
Signed-off-by: Kristina Martšenko <kristina.martsenko@gmail.com>
Cc: Bill Pemberton <wfp5p@worldbroken.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the driver as it hasn't been cleaned up and it doesn't look like
anyone is going to work on it anymore. This can be reverted if someone
wants to work to fix the remaining issues the driver has.
Signed-off-by: Kristina Martšenko <kristina.martsenko@gmail.com>
Cc: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the driver as it hasn't been cleaned up and it doesn't look like
anyone is going to work on it anymore.
Signed-off-by: Kristina Martšenko <kristina.martsenko@gmail.com>
Cc: Henk de Groot <pe1dnn@amsat.org>
Cc: David Kilroy <kilroyd@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Ben Chan <benchan@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch addresses the following issues:
- Use int instead of u32 whenever makes sense
- Turn extract_qos_list() in gdm_qos.c, which previously always returned
  0, into a void function.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: Michalis Pappas <mpappas@fastmail.fm>
Signed-off-by: Ben Chan <benchan@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Ben Chan <benchan@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch changes gdm_usb_send() and gdm_sdio_send() to return -EINVAL instead
of calling BUG_ON if an invalid data length is passed to the functions.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: Michalis Pappas <mpappas@fastmail.fm>
Signed-off-by: Ben Chan <benchan@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Simple code style fixes:
 - "if(" -> "if ("
 - "switch(" -> "switch ("
 - move one open brace to the line of the declaration instead of
   its own line
 - remove trailing whitespace
Signed-off-by: Guillaume Morin <guillaume@morinfr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes the tab error found in base.h, reported by checkpatch.pl tool
Signed-off-by: Morgan Stuart <morgansstuartdev@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix checkpatch warning:
WARNING: kfree(NULL) is safe this check is probably not required

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: devel@driverdev.osuosl.org
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes the following checkpatch.pl issues in hfa384x_usb.c:
WARNING: Missing a blank line after declarations
Signed-off-by: Quentin Lee <lee.rhapsody@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

- this fixes few sparse warnings for missing static in functions:

drivers/staging/lustre/lnet/lnet/api-ni.c:63:6: warning: symbol 'lnet_get_routes' was not declared. Should it be static?
drivers/staging/lustre/lnet/lnet/api-ni.c:69:6: warning: symbol 'lnet_get_networks' was not declared. Should it be static?
drivers/staging/lustre/lnet/lnet/api-ni.c:93:1: warning: symbol 'lnet_init_locks' was not declared. Should it be static?
drivers/staging/lustre/lnet/lnet/api-ni.c:102:1: warning: symbol 'lnet_fini_locks' was not declared. Should it be static?
drivers/staging/lustre/lnet/lnet/api-ni.c:180:6: warning: symbol 'lnet_assert_wire_constants' was not declared. Should it be static?
drivers/staging/lustre/lnet/lnet/api-ni.c:273:7: warning: symbol 'lnet_find_lnd_by_type' was not declared. Should it be static?
drivers/staging/lustre/lnet/lnet/api-ni.c:419:1: warning: symbol 'lnet_create_interface_cookie' was not declared. Should it be static?
drivers/staging/lustre/lnet/lnet/api-ni.c:450:1: warning: symbol 'lnet_res_container_cleanup' was not declared. Should it be static?
drivers/staging/lustre/lnet/lnet/api-ni.c:494:1: warning: symbol 'lnet_res_container_setup' was not declared. Should it be static?
drivers/staging/lustre/lnet/lnet/api-ni.c:612:1: warning: symbol 'lnet_prepare' was not declared. Should it be static?
drivers/staging/lustre/lnet/lnet/api-ni.c:917:1: warning: symbol 'lnet_shutdown_lndnis' was not declared. Should it be static?
drivers/staging/lustre/lnet/lnet/api-ni.c:1034:1: warning: symbol 'lnet_startup_lndnis' was not declared. Should it be static?
Signed-off-by: Anil Belur <askb23@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Sparse warning corrections: NULL-pointers as NULL instead of static 0's.
Signed-off-by: Sami Laine <laine.j.sami@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch moves the doubled if block inside the retval-checking one
level up.

As the if-else-block it was in is now a one-statement if-else block,
I removed the braces from it.
Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The inner if-statement was aligned just like the outer one. Why?

This indention was introduced by

    f34c488c

which is a indention-fix patch itself. That's why I'm curious about it.

I did not merge these nested if-statements, as I don't know if I'm
destroying logical seperated checks with it.
Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes some indentation errors, where multi-line statements
where not indented.
Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move to vnt_add_interface and allow to refresh at the start
of every software scan in vnt_sw_scan_start
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vnt_set_bss_mode changes the state of abyBBVGA so move
BBvSetVGAGainOffset to the function.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The driver never sets basic rate any more so remove function.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove work_struct and queue variables

Remove EnqueueRCB and DequeueRCB macros
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In s_nsBulkInUsbIoCompleteRead reuse or reallocate sb_buff and resubmit
urb.

In device_alloc_bufs allocate memory to rcb individually and
call PIPEnsBulkInUsbRead to submit the urbs

Change handling to free rcb in device_free_rx_bufs

Remove calls to workqueue.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is assigned later in function and should have been removed in
an out-of-tree merge.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use base type to __le16 and do endian correction.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace with ccmp_pn with size of IEEE80211_CCMP_PN_LEN(6)

memcpy the struct ieee80211_key_seq -> ccmp.pn onto ccmp_pn
removing the need for endian conversion.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This function is only called by comedi drivers during the (*detach) of the
driver. After it is called mite_free() is always called to kfree the allocated
mite_struct pointer.

Rename this function to mite_detach() and merge the kfree() from mite_free()
into it.

Remove the unnecessary clearing of the mite variables since the mite pointer
is going to be kfree()'d anyway.

The mite_detach() function checks if the pointer is valid so remove the
unnecessary checks in the callers.

The check can also be removed in ni_660x since the ni_660x_free_mite_rings()
function does not actually need the 'mite' pointer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This inline function is not used. Just remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This inline function simply returns the 'irq' of the struct pci_dev pointer
that is stored in struct mite_struct. This pci_dev pointer is the same as
the one that is already available in the (*auto_attach) functions where
mite_irq() is used.

Use the pci_dev pointer directly to get the irq and remove the unnecessary
inline function to remove the indirection.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These defines were probably intended to be used so that ni_mio_common.c
could detect if it was included by a driver that uses ioport or memory
mapped register access. This can actually be detected by checking if
the 'mite' member in the private data has been allocated.

Regardless, the symbols are not used. Just remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These defines were probably intended to be used so that ni_mio_common.c
could detect if it was included by a driver that uses ioport or memory
mapped register access. This can actually be detected by checking if
the 'mite' member in the private data has been allocated.

Regardless, the symbols are not used. Just remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These defines were probably intended to be used so that ni_mio_common.c
could detect if it was included by a driver that uses ioport or memory
mapped register access. This can actually be detected by checking if
the 'mite' member in the private data has been allocated.

Regardless, the symbols are not used. Just remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This define is not used ny the driver. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

By convention, the first member of the boardinfo is a 'const char *' to
the board name, especially for those comedi drivers that rely on the
comedi core to set dev->board_ptr to the entry matching the board name
when doing a legacy (*attach) to a comedi driver.

Modify the ni_board_struct appropriately for consistency, although the
board name is only used for informational purposes by this driver (only
the driver name is matched by the comedi core).

For aesthetics, also move the members in the boardinfo declarations.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, add some whitespace to the boardinfo declaration.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>