- 22 Nov, 2022 6 commits
-
-
Eli Cohen authored
ldev->lock is used to serialize lag change operations. Since multiport eswtich functionality was added, we now change the mode dynamically. However, acquiring ldev->lock is not allowed as it could possibly lead to a deadlock as reported by the lockdep mechanism. [ 836.154963] WARNING: possible circular locking dependency detected [ 836.155850] 5.19.0-rc5_net_56b7df2 #1 Not tainted [ 836.156549] ------------------------------------------------------ [ 836.157418] handler1/12198 is trying to acquire lock: [ 836.158178] ffff888187d52b58 (&ldev->lock){+.+.}-{3:3}, at: mlx5_lag_do_mirred+0x3b/0x70 [mlx5_core] [ 836.159575] [ 836.159575] but task is already holding lock: [ 836.160474] ffff8881d4de2930 (&block->cb_lock){++++}-{3:3}, at: tc_setup_cb_add+0x5b/0x200 [ 836.161669] which lock already depends on the new lock. [ 836.162905] [ 836.162905] the existing dependency chain (in reverse order) is: [ 836.164008] -> #3 (&block->cb_lock){++++}-{3:3}: [ 836.164946] down_write+0x25/0x60 [ 836.165548] tcf_block_get_ext+0x1c6/0x5d0 [ 836.166253] ingress_init+0x74/0xa0 [sch_ingress] [ 836.167028] qdisc_create.constprop.0+0x130/0x5e0 [ 836.167805] tc_modify_qdisc+0x481/0x9f0 [ 836.168490] rtnetlink_rcv_msg+0x16e/0x5a0 [ 836.169189] netlink_rcv_skb+0x4e/0xf0 [ 836.169861] netlink_unicast+0x190/0x250 [ 836.170543] netlink_sendmsg+0x243/0x4b0 [ 836.171226] sock_sendmsg+0x33/0x40 [ 836.171860] ____sys_sendmsg+0x1d1/0x1f0 [ 836.172535] ___sys_sendmsg+0xab/0xf0 [ 836.173183] __sys_sendmsg+0x51/0x90 [ 836.173836] do_syscall_64+0x3d/0x90 [ 836.174471] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 836.175282] [ 836.175282] -> #2 (rtnl_mutex){+.+.}-{3:3}: [ 836.176190] __mutex_lock+0x6b/0xf80 [ 836.176830] register_netdevice_notifier+0x21/0x120 [ 836.177631] rtnetlink_init+0x2d/0x1e9 [ 836.178289] netlink_proto_init+0x163/0x179 [ 836.178994] do_one_initcall+0x63/0x300 [ 836.179672] kernel_init_freeable+0x2cb/0x31b [ 836.180403] kernel_init+0x17/0x140 [ 836.181035] ret_from_fork+0x1f/0x30 [ 836.181687] -> #1 (pernet_ops_rwsem){+.+.}-{3:3}: [ 836.182628] down_write+0x25/0x60 [ 836.183235] unregister_netdevice_notifier+0x1c/0xb0 [ 836.184029] mlx5_ib_roce_cleanup+0x94/0x120 [mlx5_ib] [ 836.184855] __mlx5_ib_remove+0x35/0x60 [mlx5_ib] [ 836.185637] mlx5_eswitch_unregister_vport_reps+0x22f/0x440 [mlx5_core] [ 836.186698] auxiliary_bus_remove+0x18/0x30 [ 836.187409] device_release_driver_internal+0x1f6/0x270 [ 836.188253] bus_remove_device+0xef/0x160 [ 836.188939] device_del+0x18b/0x3f0 [ 836.189562] mlx5_rescan_drivers_locked+0xd6/0x2d0 [mlx5_core] [ 836.190516] mlx5_lag_remove_devices+0x69/0xe0 [mlx5_core] [ 836.191414] mlx5_do_bond_work+0x441/0x620 [mlx5_core] [ 836.192278] process_one_work+0x25c/0x590 [ 836.192963] worker_thread+0x4f/0x3d0 [ 836.193609] kthread+0xcb/0xf0 [ 836.194189] ret_from_fork+0x1f/0x30 [ 836.194826] -> #0 (&ldev->lock){+.+.}-{3:3}: [ 836.195734] __lock_acquire+0x15b8/0x2a10 [ 836.196426] lock_acquire+0xce/0x2d0 [ 836.197057] __mutex_lock+0x6b/0xf80 [ 836.197708] mlx5_lag_do_mirred+0x3b/0x70 [mlx5_core] [ 836.198575] tc_act_parse_mirred+0x25b/0x800 [mlx5_core] [ 836.199467] parse_tc_actions+0x168/0x5a0 [mlx5_core] [ 836.200340] __mlx5e_add_fdb_flow+0x263/0x480 [mlx5_core] [ 836.201241] mlx5e_configure_flower+0x8a0/0x1820 [mlx5_core] [ 836.202187] tc_setup_cb_add+0xd7/0x200 [ 836.202856] fl_hw_replace_filter+0x14c/0x1f0 [cls_flower] [ 836.203739] fl_change+0xbbe/0x1730 [cls_flower] [ 836.204501] tc_new_tfilter+0x407/0xd90 [ 836.205168] rtnetlink_rcv_msg+0x406/0x5a0 [ 836.205877] netlink_rcv_skb+0x4e/0xf0 [ 836.206535] netlink_unicast+0x190/0x250 [ 836.207217] netlink_sendmsg+0x243/0x4b0 [ 836.207915] sock_sendmsg+0x33/0x40 [ 836.208538] ____sys_sendmsg+0x1d1/0x1f0 [ 836.209219] ___sys_sendmsg+0xab/0xf0 [ 836.209878] __sys_sendmsg+0x51/0x90 [ 836.210510] do_syscall_64+0x3d/0x90 [ 836.211137] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 836.211954] other info that might help us debug this: [ 836.213174] Chain exists of: [ 836.213174] &ldev->lock --> rtnl_mutex --> &block->cb_lock 836.214650] Possible unsafe locking scenario: [ 836.214650] [ 836.215574] CPU0 CPU1 [ 836.216255] ---- ---- [ 836.216943] lock(&block->cb_lock); [ 836.217518] lock(rtnl_mutex); [ 836.218348] lock(&block->cb_lock); [ 836.219212] lock(&ldev->lock); [ 836.219758] [ 836.219758] *** DEADLOCK *** [ 836.219758] [ 836.220747] 2 locks held by handler1/12198: [ 836.221390] #0: ffff8881d4de2930 (&block->cb_lock){++++}-{3:3}, at: tc_setup_cb_add+0x5b/0x200 [ 836.222646] #1: ffff88810c9a92c0 (&esw->mode_lock){++++}-{3:3}, at: mlx5_esw_hold+0x39/0x50 [mlx5_core] [ 836.224063] stack backtrace: [ 836.224799] CPU: 6 PID: 12198 Comm: handler1 Not tainted 5.19.0-rc5_net_56b7df2 #1 [ 836.225923] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 836.227476] Call Trace: [ 836.227929] <TASK> [ 836.228332] dump_stack_lvl+0x57/0x7d [ 836.228924] check_noncircular+0x104/0x120 [ 836.229562] __lock_acquire+0x15b8/0x2a10 [ 836.230201] lock_acquire+0xce/0x2d0 [ 836.230776] ? mlx5_lag_do_mirred+0x3b/0x70 [mlx5_core] [ 836.231614] ? find_held_lock+0x2b/0x80 [ 836.232221] __mutex_lock+0x6b/0xf80 [ 836.232799] ? mlx5_lag_do_mirred+0x3b/0x70 [mlx5_core] [ 836.233636] ? mlx5_lag_do_mirred+0x3b/0x70 [mlx5_core] [ 836.234451] ? xa_load+0xc3/0x190 [ 836.234995] mlx5_lag_do_mirred+0x3b/0x70 [mlx5_core] [ 836.235803] tc_act_parse_mirred+0x25b/0x800 [mlx5_core] [ 836.236636] ? tc_act_can_offload_mirred+0x135/0x210 [mlx5_core] [ 836.237550] parse_tc_actions+0x168/0x5a0 [mlx5_core] [ 836.238364] __mlx5e_add_fdb_flow+0x263/0x480 [mlx5_core] [ 836.239202] mlx5e_configure_flower+0x8a0/0x1820 [mlx5_core] [ 836.240076] ? lock_acquire+0xce/0x2d0 [ 836.240668] ? tc_setup_cb_add+0x5b/0x200 [ 836.241294] tc_setup_cb_add+0xd7/0x200 [ 836.241917] fl_hw_replace_filter+0x14c/0x1f0 [cls_flower] [ 836.242709] fl_change+0xbbe/0x1730 [cls_flower] [ 836.243408] tc_new_tfilter+0x407/0xd90 [ 836.244043] ? tc_del_tfilter+0x880/0x880 [ 836.244672] rtnetlink_rcv_msg+0x406/0x5a0 [ 836.245310] ? netlink_deliver_tap+0x7a/0x4b0 [ 836.245991] ? if_nlmsg_stats_size+0x2b0/0x2b0 [ 836.246675] netlink_rcv_skb+0x4e/0xf0 [ 836.258046] netlink_unicast+0x190/0x250 [ 836.258669] netlink_sendmsg+0x243/0x4b0 [ 836.259288] sock_sendmsg+0x33/0x40 [ 836.259857] ____sys_sendmsg+0x1d1/0x1f0 [ 836.260473] ___sys_sendmsg+0xab/0xf0 [ 836.261064] ? lock_acquire+0xce/0x2d0 [ 836.261669] ? find_held_lock+0x2b/0x80 [ 836.262272] ? __fget_files+0xb9/0x190 [ 836.262871] ? __fget_files+0xd3/0x190 [ 836.263462] __sys_sendmsg+0x51/0x90 [ 836.264064] do_syscall_64+0x3d/0x90 [ 836.264652] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 836.265425] RIP: 0033:0x7fdbe5e2677d [ 836.266012] Code: 28 89 54 24 1c 48 89 74 24 10 89 7c 24 08 e8 ba ee ff ff 8b 54 24 1c 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 33 44 89 c7 48 89 44 24 08 e8 ee ee ff ff 48 [ 836.268485] RSP: 002b:00007fdbe48a75a0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e [ 836.269598] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007fdbe5e2677d [ 836.270576] RDX: 0000000000000000 RSI: 00007fdbe48a7640 RDI: 000000000000003c [ 836.271565] RBP: 00007fdbe48a8368 R08: 0000000000000000 R09: 0000000000000000 [ 836.272546] R10: 00007fdbe48a84b0 R11: 0000000000000293 R12: 0000557bd17dc860 [ 836.273527] R13: 0000000000000000 R14: 0000557bd17dc860 R15: 00007fdbe48a7640 [ 836.274521] </TASK> To avoid using mode holding ldev->lock in the configure flow, we queue a work to the lag workqueue and cease wait on a completion object. In addition, we remove the lock from mlx5_lag_do_mirred() since it is not really protecting anything. It should be noted that an actual deadlock has not been observed. Signed-off-by:Eli Cohen <elic@nvidia.com> Reviewed-by:
Mark Bloch <mbloch@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
Moshe Shemesh authored
In case command interface is down, or the command is not allowed, driver did not increment the entry refcount, but might have decrement as part of forced completion handling. Fix that by always increment and decrement the refcount to make it symmetric for all flows. Fixes: 50b2412b ("net/mlx5: Avoid possible free of command entry while timeout comp handler") Signed-off-by:
Eran Ben Elisha <eranbe@nvidia.com> Signed-off-by:
Moshe Shemesh <moshe@nvidia.com> Reported-by:
Jack Wang <jinpu.wang@ionos.com> Tested-by:
-
Moshe Shemesh authored
While moving to new CMD API (quiet API), some pre-existing flows may call the new API function that in case of error, returns the error instead of printing it as previously done. For such flows we bring back the print but to tracepoint this time for sys admins to have the ability to check for errors especially for commands using the new quiet API. Tracepoint output example: devlink-1333 [001] ..... 822.746922: mlx5_cmd: ACCESS_REG(0x805) op_mod(0x0) failed, status bad resource(0x5), syndrome (0xb06e1f), err(-22) Fixes: f23519e5 ("net/mlx5: cmdif, Add new api for command execution") Signed-off-by:Shay Drory <shayd@nvidia.com> Reviewed-by:
Maor Gottlieb <maorg@nvidia.com> Signed-off-by:
-
Shay Drory authored
When SF devices and SF port representors are located on different functions, unloading and reloading of SF parent driver doesn't recreate the existing SF present in the device. Fix it by querying SFs and probe active SFs during driver probe phase. Fixes: 90d010b8 ("net/mlx5: SF, Add auxiliary device support") Signed-off-by:
Parav Pandit <parav@nvidia.com> Signed-off-by:
-
Moshe Shemesh authored
Fix a bug in calculation of FW tracer timestamp. Decreasing one in the calculation should effect only bits 52_7 and not effect bits 6_0 of the timestamp, otherwise bits 6_0 are always set in this calculation. Fixes: 70dd6fdb ("net/mlx5: FW tracer, parse traces and kernel tracing support") Signed-off-by:
Feras Daoud <ferasda@nvidia.com> Signed-off-by:
-
Roy Novich authored
The driver should not interact with PCI while PCI is disabled. Trying to do so may result in being unable to get vital signs during PCI reset, driver gets timed out and fails to recover. Fixes: fad1783a ("net/mlx5: Print more info on pci error handlers") Signed-off-by:
Roy Novich <royno@nvidia.com> Reviewed-by:
Aya Levin <ayal@nvidia.com> Signed-off-by:
-
- 21 Nov, 2022 9 commits
-
-
Dan Carpenter authored
This code accidentally uses the RX macro twice instead of the RX and TX. Fixes: 6c635f78 ("octeontx2-af: cn10k: mcs: Handle MCS block interrupts") Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kees Cook authored
Zero-length arrays are deprecated[1] and are being replaced with flexible array members in support of the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy(), correctly instrument array indexing with UBSAN_BOUNDS, and to globally enable -fstrict-flex-arrays=3. Replace zero-length array with flexible-array member in struct key_vector. This results in no differences in binary output. [1] https://github.com/KSPP/linux/issues/78 Cc: Jakub Kicinski <kuba@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: David Ahern <dsahern@kernel.org> Cc: Eric Dumazet <edumazet@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org> Cc: netdev@vger.kernel.org Signed-off-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
-
Daniel Díaz authored
The `nettest` binary, built from `selftests/net/nettest.c`, was expected to be found in the path during test execution of `fcnal-test.sh` and `pmtu.sh`, leading to tests getting skipped when the binary is not installed in the system, as can be seen in these logs found in the wild [1]: # TEST: vti4: PMTU exceptions [SKIP] [ 350.600250] IPv6: ADDRCONF(NETDEV_CHANGE): veth_b: link becomes ready [ 350.607421] IPv6: ADDRCONF(NETDEV_CHANGE): veth_a: link becomes ready # 'nettest' command not found; skipping tests # xfrm6udp not supported # TEST: vti6: PMTU exceptions (ESP-in-UDP) [SKIP] [ 351.605102] IPv6: ADDRCONF(NETDEV_CHANGE): veth_b: link becomes ready [ 351.612243] IPv6: ADDRCONF(NETDEV_CHANGE): veth_a: link becomes ready # 'nettest' command not found; skipping tests # xfrm4udp not supported The `unicast_extensions.sh` tests also rely on `nettest`, but it runs fine there because it looks for the binary in the current working directory [2]: The same mechanism that works for the Unicast extensions tests is here copied over to the PMTU and functional tests. [1] https://lkft.validation.linaro.org/scheduler/job/5839508#L6221 [2] https://lkft.validation.linaro.org/scheduler/job/5839508#L7958Signed-off-by:
Daniel Díaz <daniel.diaz@linaro.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== The following patchset contains late Netfilter fixes for net: 1) Use READ_ONCE()/WRITE_ONCE() to update ct->mark, from Daniel Xu. Not reported by syzbot, but I presume KASAN would trigger post a splat on this. This is a rather old issue, predating git history. 2) Do not set up extensions for set element with end interval flag set on. This leads to bogusly skipping this elements as expired when listing the set/map to userspace as well as increasing memory consumpton when stateful expressions are used. This issue has been present since 4.18, when timeout support for rbtree set was added. ==================== Signed-off-by: -
Lu Wei authored
Function sparx5_tc_setup_qdisc_ets() always returns negative value because it return -EOPNOTSUPP in the end. This patch returns the rersult of sparx5_tc_ets_add() and sparx5_tc_ets_del() directly. Fixes: 21122542 ("net: microchip: sparx5: add support for offloading ets qdisc") Signed-off-by:
Lu Wei <luwei32@huawei.com> Reviewed-by:
Daniel Machon <daniel.machon@microchip.com> Signed-off-by:
-
David S. Miller authored
Shang XiaoJing says: ==================== nfc: Fix potential memory leak of skb There are still somewhere maybe leak the skb, fix the memleaks by adding fail path. ==================== Signed-off-by: -
Shang XiaoJing authored
s3fwrn5_nci_send() won't free the skb when it failed for the check before s3fwrn5_write(). As the result, the skb will memleak. Free the skb when the check failed. Fixes: c04c674f ("nfc: s3fwrn5: Add driver for Samsung S3FWRN5 NFC Chip") Signed-off-by:
Shang XiaoJing <shangxiaojing@huawei.com> Suggested-by:
Pavel Machek <pavel@denx.de> Signed-off-by:
-
Shang XiaoJing authored
nxp_nci_send() won't free the skb when it failed for the check before write(). As the result, the skb will memleak. Free the skb when the check failed. Fixes: dece4585 ("NFC: nxp-nci: Add support for NXP NCI chips") Signed-off-by:
-
Shang XiaoJing authored
nfcmrvl_i2c_nci_send() will be called by nfcmrvl_nci_send(), and skb should be freed in nfcmrvl_i2c_nci_send(). However, nfcmrvl_nci_send() won't free the skb when it failed for the test_bit(). Free the skb when test_bit() failed. Fixes: b5b3e23e ("NFC: nfcmrvl: add i2c driver") Signed-off-by:
-
- 19 Nov, 2022 11 commits
-
-
YueHaibing authored
'ret' is defined twice in macsec_changelink(), when it is set in macsec_is_offloaded case, it will be invalid before return. Fixes: 3cf3227a ("net: macsec: hardware offloading infrastructure") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Reviewed-by:
Saeed Mahameed <saeed@kernel.org> Reviewed-by:
Antoine Tenart <atenart@kernel.org> Link: https://lore.kernel.org/r/20221118011249.48112-1-yuehaibing@huawei.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Hangbin Liu authored
Currently, we get icmp6hdr via function icmp6_hdr(), which needs the skb transport header to be set first. But there is no rule to ask driver set transport header before netif_receive_skb() and bond_handle_frame(). So we will not able to get correct icmp6hdr on some drivers. Fix this by using skb_header_pointer to get the IPv6 and ICMPV6 headers. Reported-by:
Liang Li <liali@redhat.com> Fixes: 4e24be01 ("bonding: add new parameter ns_targets") Suggested-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Link: https://lore.kernel.org/r/20221118034353.1736727-1-liuhangbin@gmail.comSigned-off-by:
-
Jakub Kicinski authored
Simon Horman says: ==================== nfp: fixes for v6.1 - Ensure that information displayed by "devlink port show" reflects the number of lanes available to be split. - Avoid NULL dereference in ethtool test code. ==================== Link: https://lore.kernel.org/r/20221117153744.688595-1-simon.horman@corigine.comSigned-off-by: -
Jaco Coetzee authored
Setting of the port flag `NFP_PORT_CHANGED`, introduced to ensure the correct reading of EEPROM data, causes a fatal kernel NULL pointer dereference in cases where the target netdev type cannot be determined. Add validation of port struct pointer before attempting to set the `NFP_PORT_CHANGED` flag. Return that operation is not supported if the netdev type cannot be determined. Fixes: 4ae97cae ("nfp: ethtool: fix the display error of `ethtool -m DEVNAME`") Signed-off-by:
Jaco Coetzee <jaco.coetzee@corigine.com> Reviewed-by:
Louis Peens <louis.peens@corigine.com> Signed-off-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
-
Diana Wang authored
The error is reflected in that it shows wrong splittable status of port when executing "devlink port show". The reason which leads the error is that the assigned operation of splittable is just a simple negation operation of split and it does not consider port lanes quantity. A splittable port should have several lanes that can be split(lanes quantity > 1). If without the judgement, it will show wrong message for some firmware, such as 2x25G, 2x10G. Fixes: a0f49b54 ("devlink: Add a new devlink port split ability attribute and pass to netlink") Signed-off-by:
Diana Wang <na.wang@corigine.com> Reviewed-by:
Niklas Söderlund <niklas.soderlund@corigine.com> Signed-off-by:
-
Yang Yingliang authored
As comment of pci_get_domain_bus_and_slot() says, it returns a pci device with refcount increment, when finish using it, the caller must decrement the reference count by calling pci_dev_put(). In pch_gbe_probe(), pci_get_domain_bus_and_slot() is called, so in error path in probe() and remove() function, pci_dev_put() should be called to avoid refcount leak. Compile tested only. Fixes: 1a0bdadb ("net/pch_gbe: supports eg20t ptp clock") Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221117135148.301014-1-yangyingliang@huawei.comSigned-off-by:
-
Yang Yingliang authored
As comment of pci_get_domain_bus_and_slot() says, it returns a pci device with refcount increment, when finish using it, the caller must decrement the reference count by calling pci_dev_put(). So before returning from rvu_dbg_rvu_pf_cgx_map_display() or cgx_print_dmac_flt(), pci_dev_put() is called to avoid refcount leak. Fixes: dbc52deb ("octeontx2-af: Debugfs support for DMAC filters") Fixes: e2fb3730 ("octeontx2-af: Display CGX, NIX and PF map in debugfs.") Signed-off-by:
-
Zhang Changzhong authored
The ql3xxx_send() returns NETDEV_TX_OK without freeing skb in error handling case, add dev_kfree_skb_any() to fix it. Fixes: bd36b0ac ("qla3xxx: Add support for Qlogic 4032 chip.") Signed-off-by:
Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1668675039-21138-1-git-send-email-zhangchangzhong@huawei.comSigned-off-by:
-
Hui Tang authored
It will cause invalid pointer dereference to priv->cm3_base behind, if PTR_ERR(priv->cm3_base) in mvpp2_get_sram(). Fixes: e54ad1e0 ("net: mvpp2: add CM3 SRAM memory map") Signed-off-by:
Hui Tang <tanghui20@huawei.com> Link: https://lore.kernel.org/r/20221117084032.101144-1-tanghui20@huawei.comSigned-off-by:
-
Peter Kosyh authored
If mlx4_bitmap_init fails, mlx4_bitmap_alloc_range will dereference the NULL pointer (bitmap->table). Make sure, that mlx4_bitmap_alloc_range called in no error case. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: d57febe1 ("net/mlx4: Add A0 hybrid steering") Reviewed-by:
Tariq Toukan <tariqt@nvidia.com> Signed-off-by:
Peter Kosyh <pkosyh@yandex.ru> Link: https://lore.kernel.org/r/20221117152806.278072-1-pkosyh@yandex.ruSigned-off-by:
-
Liu Jian authored
If mtk_start_dma() fails, invoke phylink_disconnect_phy() to perform cleanup. phylink_disconnect_phy() contains the put_device action. If phylink_disconnect_phy is not performed, the Kref of netdev will leak. Fixes: b8fc9f30 ("net: ethernet: mediatek: Add basic PHYLINK support") Signed-off-by:
Liu Jian <liujian56@huawei.com> Reviewed-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20221117111356.161547-1-liujian56@huawei.comSigned-off-by:
-
- 18 Nov, 2022 14 commits
-
-
Pablo Neira Ayuso authored
Elements with an end interval flag set on do not store extensions. The global set definition is currently setting on the timeout and stateful expression for end interval elements. This leads to skipping end interval elements from the set->ops->walk() path as the expired check bogusly reports true. Moreover, do not set up stateful expressions for elements with end interval flag set on since this is never used. Fixes: 65038428 ("netfilter: nf_tables: allow to specify stateful expression in set definition") Fixes: 8d8540c4 ("netfilter: nft_set_rbtree: add timeout support") Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Daniel Xu authored
nf_conn:mark can be read from and written to in parallel. Use READ_ONCE()/WRITE_ONCE() for reads and writes to prevent unwanted compiler optimizations. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Daniel Xu <dxu@dxuuu.xyz> Signed-off-by:
-
Wang Hai authored
In pch_gbe_xmit_frame(), NETDEV_TX_OK will be returned whether pch_gbe_tx_queue() sends data successfully or not, so pch_gbe_tx_queue() needs to free skb before returning. But pch_gbe_tx_queue() returns without freeing skb in case of dma_map_single() fails. Add dev_kfree_skb_any() to fix it. Fixes: 77555ee7 ("net: Add Gigabit Ethernet driver of Topcliff PCH") Signed-off-by:
Wang Hai <wanghai38@huawei.com> Signed-off-by:
-
Lin Ma authored
Previously we leverage NCI_UNREG and the lock inside nci_close_device to prevent the race condition between opening a device and closing a device. However, it still has problem because a failed opening command will erase the NCI_UNREG flag and allow another opening command to bypass the status checking. This fix corrects that by making sure the NCI_UNREG is held. Reported-by: syzbot+43475bf3cfbd6e41f5b7@syzkaller.appspotmail.com Fixes: 48b71a9e ("NFC: add NCI_UNREG flag to eliminate the race") Signed-off-by:
Lin Ma <linma@zju.edu.cn> Signed-off-by:
-
Vladimir Oltean authored
You'd think people know that the internal 100BASE-TX PHY on the SJA1110 responds only to clause 22 MDIO transactions, but they don't :) When a clause 45 transaction is attempted, sja1105_base_tx_mdio_read() and sja1105_base_tx_mdio_write() don't expect "reg" to contain bit 30 set (MII_ADDR_C45) and pack this value into the SPI transaction buffer. But the field in the SPI buffer has a width smaller than 30 bits, so we see this confusing message from the packing() API rather than a proper rejection of C45 transactions: Call trace: dump_stack+0x1c/0x38 sja1105_pack+0xbc/0xc0 [sja1105] sja1105_xfer+0x114/0x2b0 [sja1105] sja1105_xfer_u32+0x44/0xf4 [sja1105] sja1105_base_tx_mdio_read+0x44/0x7c [sja1105] mdiobus_read+0x44/0x80 get_phy_c45_ids+0x70/0x234 get_phy_device+0x68/0x15c fwnode_mdiobus_register_phy+0x74/0x240 of_mdiobus_register+0x13c/0x380 sja1105_mdiobus_register+0x368/0x490 [sja1105] sja1105_setup+0x94/0x119c [sja1105] Cannot store 401d2405 inside bits 24-4 (would truncate) Fixes: 5a8f0974 ("net: dsa: sja1105: register the MDIO buses for 100base-T1 and 100base-TX") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
David Howells authored
After rxrpc_unbundle_conn() has removed a connection from a bundle, it checks to see if there are any conns with available channels and, if not, removes and attempts to destroy the bundle. Whilst it does check after grabbing client_bundles_lock that there are no connections attached, this races with rxrpc_look_up_bundle() retrieving the bundle, but not attaching a connection for the connection to be attached later. There is therefore a window in which the bundle can get destroyed before we manage to attach a new connection to it. Fix this by adding an "active" counter to struct rxrpc_bundle: (1) rxrpc_connect_call() obtains an active count by prepping/looking up a bundle and ditches it before returning. (2) If, during rxrpc_connect_call(), a connection is added to the bundle, this obtains an active count, which is held until the connection is discarded. (3) rxrpc_deactivate_bundle() is created to drop an active count on a bundle and destroy it when the active count reaches 0. The active count is checked inside client_bundles_lock() to prevent a race with rxrpc_look_up_bundle(). (4) rxrpc_unbundle_conn() then calls rxrpc_deactivate_bundle(). Fixes: 245500d8 ("rxrpc: Rewrite the client connection manager") Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-15975 Signed-off-by:David Howells <dhowells@redhat.com> Tested-by: zdi-disclosures@trendmicro.com cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by:
-
Wang Yufen authored
After commit afef88e6 ("selftests/bpf: Store BPF object files with .bpf.o extension"), we should use xdp_dummy.bpf.o instade of xdp_dummy.o. In addition, use the BPF_FILE variable to save the BPF object file name, which can be better identified and modified. Fixes: afef88e6 ("selftests/bpf: Store BPF object files with .bpf.o extension") Signed-off-by:
Wang Yufen <wangyufen@huawei.com> Cc: Daniel Müller <deso@posteo.net> Signed-off-by:
-
Mahesh Bandewar authored
Recently syzkaller discovered the issue of disappearing lower device (NETDEV_UNREGISTER) while the virtual device (like macvlan) is still having it as a lower device. So it's just a matter of time similar discovery will be made for IPvlan device setup. So fixing it preemptively. Also while at it, add a refcount tracker. Fixes: 2ad7bf36 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by:
Mahesh Bandewar <maheshb@google.com> Signed-off-by:
-
Thomas Zeitlhofer authored
Commit 0ff4eb3d ("neighbour: make proxy_queue.qlen limit per-device") introduced the length counter qlen in struct neigh_parms. There are separate neigh_parms instances for IPv4/ARP and IPv6/ND, and while the family specific qlen is incremented in pneigh_enqueue(), the mentioned commit decrements always the IPv4/ARP specific qlen, regardless of the currently processed family, in pneigh_queue_purge() and neigh_proxy_process(). As a result, with IPv6/ND, the family specific qlen is only incremented (and never decremented) until it exceeds PROXY_QLEN, and then, according to the check in pneigh_enqueue(), neighbor solicitations are not answered anymore. As an example, this is noted when using the subnet-router anycast address to access a Linux router. After a certain amount of time (in the observed case, qlen exceeded PROXY_QLEN after two days), the Linux router stops answering neighbor solicitations for its subnet-router anycast address and effectively becomes unreachable. Another result with IPv6/ND is that the IPv4/ARP specific qlen is decremented more often than incremented. This leads to negative qlen values, as a signed integer has been used for the length counter qlen, and potentially to an integer overflow. Fix this by introducing the helper function neigh_parms_qlen_dec(), which decrements the family specific qlen. Thereby, make use of the existing helper function neigh_get_dev_parms_rcu(), whose definition therefore needs to be placed earlier in neighbour.c. Take the family member from struct neigh_table to determine the currently processed family and appropriately call neigh_parms_qlen_dec() from pneigh_queue_purge() and neigh_proxy_process(). Additionally, use an unsigned integer for the length counter qlen. Fixes: 0ff4eb3d ("neighbour: make proxy_queue.qlen limit per-device") Signed-off-by:
Thomas Zeitlhofer <thomas.zeitlhofer+lkml@ze-it.at> Signed-off-by:
-
Leon Romanovsky authored
Fix the warning reported by kbuild: cocci warnings: (new ones prefixed by >>) >> drivers/net/ethernet/cavium/liquidio/lio_main.c:1797:54-56: WARNING !A || A && B is equivalent to !A || B drivers/net/ethernet/cavium/liquidio/lio_main.c:1827:54-56: WARNING !A || A && B is equivalent to !A || B Fixes: 8979f428 ("net: liquidio: release resources when liquidio driver open failed") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Leon Romanovsky <leonro@nvidia.com> Reviewed-by:
-
Jakub Kicinski authored
Mat Martineau says: ==================== mptcp: selftests: Fix timeouts and test isolation Patches 1 and 3 adjust test timeouts to reduce false negatives on slow machines. Patch 2 improves test isolation by running the mptcp_sockopt test in its own net namespace. ==================== Link: https://lore.kernel.org/r/20221115221046.20370-1-mathew.j.martineau@linux.intel.comSigned-off-by:
-
Matthieu Baerts authored
The estimated time was supposing the rate was expressed in mibit (bit * 1024^2) but it is in mbit (bit * 1000^2). This makes the threshold higher but in a more realistic way to avoid false positives reported by CI instances. Before this patch, the thresholds were at 7561/4005ms and now they are at 7906/4178ms. While at it, also fix a typo in the linked comment, spotted by Mat. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/310 Fixes: 1a418cb8 ("mptcp: simult flow self-tests") Suggested-by:
Paolo Abeni <pabeni@redhat.com> Reviewed-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
-
Matthieu Baerts authored
Not running it from a new netns causes issues if some MPTCP settings are modified, e.g. if MPTCP is disabled from the sysctl knob, if multiple addresses are available and added to the MPTCP path-manager, etc. In these cases, the created connection will not behave as expected, e.g. unable to create an MPTCP socket, more than one subflow is seen, etc. A new "sandbox" net namespace is now created and used to run mptcp_sockopt from this controlled environment. Fixes: ce997912 ("selftests: mptcp: add mptcp getsockopt test cases") Reviewed-by:
-
Paolo Abeni authored
On slow or busy VM, some test-cases still fail because the data transfer completes before the endpoint manipulation actually took effect. Address the issue by artificially increasing the runtime for the relevant test-cases. Fixes: ef360019 ("selftests: mptcp: signal addresses testcases") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/309Reviewed-by:
-
