1. 29 Aug, 2019 15 commits
  2. 25 Aug, 2019 25 commits
    • Greg Kroah-Hartman's avatar
      Linux 4.19.68 · def4c11b
      Greg Kroah-Hartman authored
      def4c11b
    • Michal Simek's avatar
      mmc: sdhci-of-arasan: Do now show error message in case of deffered probe · 7c13983a
      Michal Simek authored
      commit 60208a26 upstream.
      
      When mmc-pwrseq property is passed mmc_pwrseq_alloc() can return
      -EPROBE_DEFER because driver for power sequence provider is not probed
      yet. Do not show error message when this situation happens.
      Signed-off-by: default avatarMichal Simek <michal.simek@xilinx.com>
      Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      7c13983a
    • Maxim Mikityanskiy's avatar
      net/mlx5e: Use flow keys dissector to parse packets for ARFS · 447f5f48
      Maxim Mikityanskiy authored
      [ Upstream commit 405b93eb ]
      
      The current ARFS code relies on certain fields to be set in the SKB
      (e.g. transport_header) and extracts IP addresses and ports by custom
      code that parses the packet. The necessary SKB fields, however, are not
      always set at that point, which leads to an out-of-bounds access. Use
      skb_flow_dissect_flow_keys() to get the necessary information reliably,
      fix the out-of-bounds access and reuse the code.
      
      Fixes: 18c908e4 ("net/mlx5e: Add accelerated RFS support")
      Signed-off-by: default avatarMaxim Mikityanskiy <maximmi@mellanox.com>
      Reviewed-by: default avatarTariq Toukan <tariqt@mellanox.com>
      Signed-off-by: default avatarSaeed Mahameed <saeedm@mellanox.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      447f5f48
    • Huy Nguyen's avatar
      net/mlx5e: Only support tx/rx pause setting for port owner · fbd8ab68
      Huy Nguyen authored
      [ Upstream commit 466df6eb ]
      
      Only support changing tx/rx pause frame setting if the net device
      is the vport group manager.
      
      Fixes: 3c2d18ef ("net/mlx5e: Support ethtool get/set_pauseparam")
      Signed-off-by: default avatarHuy Nguyen <huyn@mellanox.com>
      Reviewed-by: default avatarParav Pandit <parav@mellanox.com>
      Signed-off-by: default avatarSaeed Mahameed <saeedm@mellanox.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      fbd8ab68
    • Ross Lagerwall's avatar
      xen/netback: Reset nr_frags before freeing skb · b3410f0f
      Ross Lagerwall authored
      [ Upstream commit 3a0233dd ]
      
      At this point nr_frags has been incremented but the frag does not yet
      have a page assigned so freeing the skb results in a crash. Reset
      nr_frags before freeing the skb to prevent this.
      Signed-off-by: default avatarRoss Lagerwall <ross.lagerwall@citrix.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b3410f0f
    • Chris Packham's avatar
      tipc: initialise addr_trail_end when setting node addresses · cc4ff0f4
      Chris Packham authored
      [ Upstream commit 8874ecae ]
      
      We set the field 'addr_trial_end' to 'jiffies', instead of the current
      value 0, at the moment the node address is initialized. This guarantees
      we don't inadvertently enter an address trial period when the node
      address is explicitly set by the user.
      Signed-off-by: default avatarChris Packham <chris.packham@alliedtelesis.co.nz>
      Acked-by: default avatarJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      cc4ff0f4
    • YueHaibing's avatar
      team: Add vlan tx offload to hw_enc_features · e89bb758
      YueHaibing authored
      [ Upstream commit 227f2f03 ]
      
      We should also enable team's vlan tx offload in hw_enc_features,
      pass the vlan packets to the slave devices with vlan tci, let the
      slave handle vlan tunneling offload implementation.
      
      Fixes: 3268e5cb ("team: Advertise tunneling offload features")
      Signed-off-by: default avatarYueHaibing <yuehaibing@huawei.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      e89bb758
    • Xin Long's avatar
      sctp: fix the transport error_count check · eeb148d2
      Xin Long authored
      [ Upstream commit a1794de8 ]
      
      As the annotation says in sctp_do_8_2_transport_strike():
      
        "If the transport error count is greater than the pf_retrans
         threshold, and less than pathmaxrtx ..."
      
      It should be transport->error_count checked with pathmaxrxt,
      instead of asoc->pf_retrans.
      
      Fixes: 5aa93bcf ("sctp: Implement quick failover draft from tsvwg")
      Signed-off-by: default avatarXin Long <lucien.xin@gmail.com>
      Acked-by: default avatarMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
      Signed-off-by: default avatarJakub Kicinski <jakub.kicinski@netronome.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      eeb148d2
    • zhengbin's avatar
      sctp: fix memleak in sctp_send_reset_streams · 227f204a
      zhengbin authored
      [ Upstream commit 6d5afe20 ]
      
      If the stream outq is not empty, need to kfree nstr_list.
      
      Fixes: d570a59c ("sctp: only allow the out stream reset when the stream outq is empty")
      Reported-by: default avatarHulk Robot <hulkci@huawei.com>
      Signed-off-by: default avatarzhengbin <zhengbin13@huawei.com>
      Acked-by: default avatarMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
      Acked-by: default avatarNeil Horman <nhorman@tuxdriver.com>
      Signed-off-by: default avatarJakub Kicinski <jakub.kicinski@netronome.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      227f204a
    • Eric Dumazet's avatar
      net/packet: fix race in tpacket_snd() · 154e6bc4
      Eric Dumazet authored
      [ Upstream commit 32d3182c ]
      
      packet_sendmsg() checks tx_ring.pg_vec to decide
      if it must call tpacket_snd().
      
      Problem is that the check is lockless, meaning another thread
      can issue a concurrent setsockopt(PACKET_TX_RING ) to flip
      tx_ring.pg_vec back to NULL.
      
      Given that tpacket_snd() grabs pg_vec_lock mutex, we can
      perform the check again to solve the race.
      
      syzbot reported :
      
      kasan: CONFIG_KASAN_INLINE enabled
      kasan: GPF could be caused by NULL-ptr deref or user memory access
      general protection fault: 0000 [#1] PREEMPT SMP KASAN
      CPU: 1 PID: 11429 Comm: syz-executor394 Not tainted 5.3.0-rc4+ #101
      Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
      RIP: 0010:packet_lookup_frame+0x8d/0x270 net/packet/af_packet.c:474
      Code: c1 ee 03 f7 73 0c 80 3c 0e 00 0f 85 cb 01 00 00 48 8b 0b 89 c0 4c 8d 24 c1 48 b8 00 00 00 00 00 fc ff df 4c 89 e1 48 c1 e9 03 <80> 3c 01 00 0f 85 94 01 00 00 48 8d 7b 10 4d 8b 3c 24 48 b8 00 00
      RSP: 0018:ffff88809f82f7b8 EFLAGS: 00010246
      RAX: dffffc0000000000 RBX: ffff8880a45c7030 RCX: 0000000000000000
      RDX: 0000000000000000 RSI: 1ffff110148b8e06 RDI: ffff8880a45c703c
      RBP: ffff88809f82f7e8 R08: ffff888087aea200 R09: fffffbfff134ae50
      R10: fffffbfff134ae4f R11: ffffffff89a5727f R12: 0000000000000000
      R13: 0000000000000001 R14: ffff8880a45c6ac0 R15: 0000000000000000
      FS:  00007fa04716f700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000
      CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
      CR2: 00007fa04716edb8 CR3: 0000000091eb4000 CR4: 00000000001406e0
      DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
      DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
      Call Trace:
       packet_current_frame net/packet/af_packet.c:487 [inline]
       tpacket_snd net/packet/af_packet.c:2667 [inline]
       packet_sendmsg+0x590/0x6250 net/packet/af_packet.c:2975
       sock_sendmsg_nosec net/socket.c:637 [inline]
       sock_sendmsg+0xd7/0x130 net/socket.c:657
       ___sys_sendmsg+0x3e2/0x920 net/socket.c:2311
       __sys_sendmmsg+0x1bf/0x4d0 net/socket.c:2413
       __do_sys_sendmmsg net/socket.c:2442 [inline]
       __se_sys_sendmmsg net/socket.c:2439 [inline]
       __x64_sys_sendmmsg+0x9d/0x100 net/socket.c:2439
       do_syscall_64+0xfd/0x6a0 arch/x86/entry/common.c:296
       entry_SYSCALL_64_after_hwframe+0x49/0xbe
      
      Fixes: 69e3c75f ("net: TX_RING and packet mmap")
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Reported-by: default avatarsyzbot <syzkaller@googlegroups.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      154e6bc4
    • Wenwen Wang's avatar
      net/mlx4_en: fix a memory leak bug · f588dccf
      Wenwen Wang authored
      [ Upstream commit 48ec7014 ]
      
      In mlx4_en_config_rss_steer(), 'rss_map->indir_qp' is allocated through
      kzalloc(). After that, mlx4_qp_alloc() is invoked to configure RSS
      indirection. However, if mlx4_qp_alloc() fails, the allocated
      'rss_map->indir_qp' is not deallocated, leading to a memory leak bug.
      
      To fix the above issue, add the 'qp_alloc_err' label to free
      'rss_map->indir_qp'.
      
      Fixes: 4931c6ef ("net/mlx4_en: Optimized single ring steering")
      Signed-off-by: default avatarWenwen Wang <wenwen@cs.uga.edu>
      Reviewed-by: default avatarTariq Toukan <tariqt@mellanox.com>
      Signed-off-by: default avatarJakub Kicinski <jakub.kicinski@netronome.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      f588dccf
    • Chen-Yu Tsai's avatar
      net: dsa: Check existence of .port_mdb_add callback before calling it · 8905a249
      Chen-Yu Tsai authored
      [ Upstream commit 58799865 ]
      
      The dsa framework has optional .port_mdb_{prepare,add,del} callback fields
      for drivers to handle multicast database entries. When adding an entry, the
      framework goes through a prepare phase, then a commit phase. Drivers not
      providing these callbacks should be detected in the prepare phase.
      
      DSA core may still bypass the bridge layer and call the dsa_port_mdb_add
      function directly with no prepare phase or no switchdev trans object,
      and the framework ends up calling an undefined .port_mdb_add callback.
      This results in a NULL pointer dereference, as shown in the log below.
      
      The other functions seem to be properly guarded. Do the same for
      .port_mdb_add in dsa_switch_mdb_add_bitmap() as well.
      
          8<--- cut here ---
          Unable to handle kernel NULL pointer dereference at virtual address 00000000
          pgd = (ptrval)
          [00000000] *pgd=00000000
          Internal error: Oops: 80000005 [#1] SMP ARM
          Modules linked in: rtl8xxxu rtl8192cu rtl_usb rtl8192c_common rtlwifi mac80211 cfg80211
          CPU: 1 PID: 134 Comm: kworker/1:2 Not tainted 5.3.0-rc1-00247-gd3519030752a #1
          Hardware name: Allwinner sun7i (A20) Family
          Workqueue: events switchdev_deferred_process_work
          PC is at 0x0
          LR is at dsa_switch_event+0x570/0x620
          pc : [<00000000>]    lr : [<c08533ec>]    psr: 80070013
          sp : ee871db8  ip : 00000000  fp : ee98d0a4
          r10: 0000000c  r9 : 00000008  r8 : ee89f710
          r7 : ee98d040  r6 : ee98d088  r5 : c0f04c48  r4 : ee98d04c
          r3 : 00000000  r2 : ee89f710  r1 : 00000008  r0 : ee98d040
          Flags: Nzcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
          Control: 10c5387d  Table: 6deb406a  DAC: 00000051
          Process kworker/1:2 (pid: 134, stack limit = 0x(ptrval))
          Stack: (0xee871db8 to 0xee872000)
          1da0:                                                       ee871e14 103ace2d
          1dc0: 00000000 ffffffff 00000000 ee871e14 00000005 00000000 c08524a0 00000000
          1de0: ffffe000 c014bdfc c0f04c48 ee871e98 c0f04c48 ee9e5000 c0851120 c014bef0
          1e00: 00000000 b643aea2 ee9b4068 c08509a8 ee2bf940 ee89f710 ee871ecb 00000000
          1e20: 00000008 103ace2d 00000000 c087e248 ee29c868 103ace2d 00000001 ffffffff
          1e40: 00000000 ee871e98 00000006 00000000 c0fb2a50 c087e2d0 ffffffff c08523c4
          1e60: ffffffff c014bdfc 00000006 c0fad2d0 ee871e98 ee89f710 00000000 c014c500
          1e80: 00000000 ee89f3c0 c0f04c48 00000000 ee9e5000 c087dfb4 ee9e5000 00000000
          1ea0: ee89f710 ee871ecb 00000001 103ace2d 00000000 c0f04c48 00000000 c087e0a8
          1ec0: 00000000 efd9a3e0 0089f3c0 103ace2d ee89f700 ee89f710 ee9e5000 00000122
          1ee0: 00000100 c087e130 ee89f700 c0fad2c8 c1003ef0 c087de4c 2e928000 c0fad2ec
          1f00: c0fad2ec ee839580 ef7a62c0 ef7a9400 00000000 c087def8 c0fad2ec c01447dc
          1f20: ef315640 ef7a62c0 00000008 ee839580 ee839594 ef7a62c0 00000008 c0f03d00
          1f40: ef7a62d8 ef7a62c0 ffffe000 c0145b84 ffffe000 c0fb2420 c0bfaa8c 00000000
          1f60: ffffe000 ee84b600 ee84b5c0 00000000 ee870000 ee839580 c0145b40 ef0e5ea4
          1f80: ee84b61c c014a6f8 00000001 ee84b5c0 c014a5b0 00000000 00000000 00000000
          1fa0: 00000000 00000000 00000000 c01010e8 00000000 00000000 00000000 00000000
          1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
          1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
          [<c08533ec>] (dsa_switch_event) from [<c014bdfc>] (notifier_call_chain+0x48/0x84)
          [<c014bdfc>] (notifier_call_chain) from [<c014bef0>] (raw_notifier_call_chain+0x18/0x20)
          [<c014bef0>] (raw_notifier_call_chain) from [<c08509a8>] (dsa_port_mdb_add+0x48/0x74)
          [<c08509a8>] (dsa_port_mdb_add) from [<c087e248>] (__switchdev_handle_port_obj_add+0x54/0xd4)
          [<c087e248>] (__switchdev_handle_port_obj_add) from [<c087e2d0>] (switchdev_handle_port_obj_add+0x8/0x14)
          [<c087e2d0>] (switchdev_handle_port_obj_add) from [<c08523c4>] (dsa_slave_switchdev_blocking_event+0x94/0xa4)
          [<c08523c4>] (dsa_slave_switchdev_blocking_event) from [<c014bdfc>] (notifier_call_chain+0x48/0x84)
          [<c014bdfc>] (notifier_call_chain) from [<c014c500>] (blocking_notifier_call_chain+0x50/0x68)
          [<c014c500>] (blocking_notifier_call_chain) from [<c087dfb4>] (switchdev_port_obj_notify+0x44/0xa8)
          [<c087dfb4>] (switchdev_port_obj_notify) from [<c087e0a8>] (switchdev_port_obj_add_now+0x90/0x104)
          [<c087e0a8>] (switchdev_port_obj_add_now) from [<c087e130>] (switchdev_port_obj_add_deferred+0x14/0x5c)
          [<c087e130>] (switchdev_port_obj_add_deferred) from [<c087de4c>] (switchdev_deferred_process+0x64/0x104)
          [<c087de4c>] (switchdev_deferred_process) from [<c087def8>] (switchdev_deferred_process_work+0xc/0x14)
          [<c087def8>] (switchdev_deferred_process_work) from [<c01447dc>] (process_one_work+0x218/0x50c)
          [<c01447dc>] (process_one_work) from [<c0145b84>] (worker_thread+0x44/0x5bc)
          [<c0145b84>] (worker_thread) from [<c014a6f8>] (kthread+0x148/0x150)
          [<c014a6f8>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c)
          Exception stack(0xee871fb0 to 0xee871ff8)
          1fa0:                                     00000000 00000000 00000000 00000000
          1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
          1fe0: 00000000 00000000 00000000 00000000 00000013 00000000
          Code: bad PC value
          ---[ end trace 1292c61abd17b130 ]---
      
          [<c08533ec>] (dsa_switch_event) from [<c014bdfc>] (notifier_call_chain+0x48/0x84)
          corresponds to
      
      	$ arm-linux-gnueabihf-addr2line -C -i -e vmlinux c08533ec
      
      	linux/net/dsa/switch.c:156
      	linux/net/dsa/switch.c:178
      	linux/net/dsa/switch.c:328
      
      Fixes: e6db98db ("net: dsa: add switch mdb bitmap functions")
      Signed-off-by: default avatarChen-Yu Tsai <wens@csie.org>
      Reviewed-by: default avatarVivien Didelot <vivien.didelot@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      8905a249
    • YueHaibing's avatar
      bonding: Add vlan tx offload to hw_enc_features · d61d8ea9
      YueHaibing authored
      [ Upstream commit d595b03d ]
      
      As commit 30d8177e ("bonding: Always enable vlan tx offload")
      said, we should always enable bonding's vlan tx offload, pass the
      vlan packets to the slave devices with vlan tci, let them to handle
      vlan implementation.
      
      Now if encapsulation protocols like VXLAN is used, skb->encapsulation
      may be set, then the packet is passed to vlan device which based on
      bonding device. However in netif_skb_features(), the check of
      hw_enc_features:
      
      	 if (skb->encapsulation)
                       features &= dev->hw_enc_features;
      
      clears NETIF_F_HW_VLAN_CTAG_TX/NETIF_F_HW_VLAN_STAG_TX. This results
      in same issue in commit 30d8177e like this:
      
      vlan_dev_hard_start_xmit
        -->dev_queue_xmit
          -->validate_xmit_skb
            -->netif_skb_features //NETIF_F_HW_VLAN_CTAG_TX is cleared
            -->validate_xmit_vlan
              -->__vlan_hwaccel_push_inside //skb->tci is cleared
      ...
       --> bond_start_xmit
         --> bond_xmit_hash //BOND_XMIT_POLICY_ENCAP34
           --> __skb_flow_dissect // nhoff point to IP header
              -->  case htons(ETH_P_8021Q)
                   // skb_vlan_tag_present is false, so
                   vlan = __skb_header_pointer(skb, nhoff, sizeof(_vlan),
                   //vlan point to ip header wrongly
      
      Fixes: b2a103e6 ("bonding: convert to ndo_fix_features")
      Signed-off-by: default avatarYueHaibing <yuehaibing@huawei.com>
      Acked-by: default avatarJay Vosburgh <jay.vosburgh@canonical.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      d61d8ea9
    • Manish Chopra's avatar
      bnx2x: Fix VF's VLAN reconfiguration in reload. · 40933af4
      Manish Chopra authored
      [ Upstream commit 4a4d2d37 ]
      
      Commit 04f05230 ("bnx2x: Remove configured vlans as
      part of unload sequence."), introduced a regression in driver
      that as a part of VF's reload flow, VLANs created on the VF
      doesn't get re-configured in hardware as vlan metadata/info
      was not getting cleared for the VFs which causes vlan PING to stop.
      
      This patch clears the vlan metadata/info so that VLANs gets
      re-configured back in the hardware in VF's reload flow and
      PING/traffic continues for VLANs created over the VFs.
      
      Fixes: 04f05230 ("bnx2x: Remove configured vlans as part of unload sequence.")
      Signed-off-by: default avatarManish Chopra <manishc@marvell.com>
      Signed-off-by: default avatarSudarsana Kalluru <skalluru@marvell.com>
      Signed-off-by: default avatarShahed Shaikh <shshaikh@marvell.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      40933af4
    • Joerg Roedel's avatar
      iommu/amd: Move iommu_init_pci() to .init section · 03d54393
      Joerg Roedel authored
      commit 24d2c521 upstream.
      
      The function is only called from another __init function, so
      it should be moved to .init too.
      Signed-off-by: default avatarJoerg Roedel <jroedel@suse.de>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      03d54393
    • YueHaibing's avatar
      Input: psmouse - fix build error of multiple definition · 62e023dd
      YueHaibing authored
      commit 49e6979e upstream.
      
      trackpoint_detect() should be static inline while
      CONFIG_MOUSE_PS2_TRACKPOINT is not set, otherwise, we build fails:
      
      drivers/input/mouse/alps.o: In function `trackpoint_detect':
      alps.c:(.text+0x8e00): multiple definition of `trackpoint_detect'
      drivers/input/mouse/psmouse-base.o:psmouse-base.c:(.text+0x1b50): first defined here
      Reported-by: default avatarHulk Robot <hulkci@huawei.com>
      Fixes: 55e3d922 ("Input: psmouse - allow disabing certain protocol extensions")
      Signed-off-by: default avatarYueHaibing <yuehaibing@huawei.com>
      Signed-off-by: default avatarDmitry Torokhov <dmitry.torokhov@gmail.com>
      Cc: Hui Wang <hui.wang@canonical.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      62e023dd
    • Dirk Morris's avatar
      netfilter: conntrack: Use consistent ct id hash calculation · 28ff7d3b
      Dirk Morris authored
      commit 656c8e9c upstream.
      
      Change ct id hash calculation to only use invariants.
      
      Currently the ct id hash calculation is based on some fields that can
      change in the lifetime on a conntrack entry in some corner cases. The
      current hash uses the whole tuple which contains an hlist pointer which
      will change when the conntrack is placed on the dying list resulting in
      a ct id change.
      
      This patch also removes the reply-side tuple and extension pointer from
      the hash calculation so that the ct id will will not change from
      initialization until confirmation.
      
      Fixes: 3c791076 ("netfilter: ctnetlink: don't use conntrack/expect object addresses as id")
      Signed-off-by: default avatarDirk Morris <dmorris@metaloft.com>
      Acked-by: default avatarFlorian Westphal <fw@strlen.de>
      Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      28ff7d3b
    • Will Deacon's avatar
      arm64: ftrace: Ensure module ftrace trampoline is coherent with I-side · 30b9da0e
      Will Deacon authored
      commit b6143d10 upstream.
      
      The initial support for dynamic ftrace trampolines in modules made use
      of an indirect branch which loaded its target from the beginning of
      a special section (e71a4e1b ("arm64: ftrace: add support for far
      branches to dynamic ftrace")). Since no instructions were being patched,
      no cache maintenance was needed. However, later in be0f272b ("arm64:
      ftrace: emit ftrace-mod.o contents through code") this code was reworked
      to output the trampoline instructions directly into the PLT entry but,
      unfortunately, the necessary cache maintenance was overlooked.
      
      Add a call to __flush_icache_range() after writing the new trampoline
      instructions but before patching in the branch to the trampoline.
      
      Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
      Cc: James Morse <james.morse@arm.com>
      Cc: <stable@vger.kernel.org>
      Fixes: be0f272b ("arm64: ftrace: emit ftrace-mod.o contents through code")
      Signed-off-by: default avatarWill Deacon <will@kernel.org>
      Signed-off-by: default avatarCatalin Marinas <catalin.marinas@arm.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      30b9da0e
    • Mike Snitzer's avatar
      dm: disable DISCARD if the underlying storage no longer supports it · a1cd2f70
      Mike Snitzer authored
      commit bcb44433 upstream.
      
      Storage devices which report supporting discard commands like
      WRITE_SAME_16 with unmap, but reject discard commands sent to the
      storage device.  This is a clear storage firmware bug but it doesn't
      change the fact that should a program cause discards to be sent to a
      multipath device layered on this buggy storage, all paths can end up
      failed at the same time from the discards, causing possible I/O loss.
      
      The first discard to a path will fail with Illegal Request, Invalid
      field in cdb, e.g.:
       kernel: sd 8:0:8:19: [sdfn] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
       kernel: sd 8:0:8:19: [sdfn] tag#0 Sense Key : Illegal Request [current]
       kernel: sd 8:0:8:19: [sdfn] tag#0 Add. Sense: Invalid field in cdb
       kernel: sd 8:0:8:19: [sdfn] tag#0 CDB: Write same(16) 93 08 00 00 00 00 00 a0 08 00 00 00 80 00 00 00
       kernel: blk_update_request: critical target error, dev sdfn, sector 10487808
      
      The SCSI layer converts this to the BLK_STS_TARGET error number, the sd
      device disables its support for discard on this path, and because of the
      BLK_STS_TARGET error multipath fails the discard without failing any
      path or retrying down a different path.  But subsequent discards can
      cause path failures.  Any discards sent to the path which already failed
      a discard ends up failing with EIO from blk_cloned_rq_check_limits with
      an "over max size limit" error since the discard limit was set to 0 by
      the sd driver for the path.  As the error is EIO, this now fails the
      path and multipath tries to send the discard down the next path.  This
      cycle continues as discards are sent until all paths fail.
      
      Fix this by training DM core to disable DISCARD if the underlying
      storage already did so.
      
      Also, fix branching in dm_done() and clone_endio() to reflect the
      mutually exclussive nature of the IO operations in question.
      
      Cc: stable@vger.kernel.org
      Reported-by: default avatarDavid Jeffery <djeffery@redhat.com>
      Signed-off-by: default avatarMike Snitzer <snitzer@redhat.com>
      [Salvatore Bonaccorso: backported to 4.19: Adjust for context changes in
      drivers/md/dm-core.h]
      Signed-off-by: default avatarSalvatore Bonaccorso <carnil@debian.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      a1cd2f70
    • Rodrigo Vivi's avatar
      4af28b2f
    • Tony Lindgren's avatar
      USB: serial: option: Add Motorola modem UARTs · 3ca5b7b4
      Tony Lindgren authored
      commit 6caf0be4 upstream.
      
      On Motorola Mapphone devices such as Droid 4 there are five USB ports
      that do not use the same layout as Gobi 1K/2K/etc devices listed in
      qcserial.c. So we should use qcaux.c or option.c as noted by
      Dan Williams <dan.j.williams@intel.com>.
      
      As the Motorola USB serial ports have an interrupt endpoint as shown
      with lsusb -v, we should use option.c instead of qcaux.c as pointed out
      by Johan Hovold <johan@kernel.org>.
      
      The ff/ff/ff interfaces seem to always be UARTs on Motorola devices.
      For the other interfaces, class 0x0a (CDC Data) should not in general
      be added as they are typically part of a multi-interface function as
      noted earlier by Bjørn Mork <bjorn@mork.no>.
      
      However, looking at the Motorola mapphone kernel code, the mdm6600 0x0a
      class is only used for flashing the modem firmware, and there are no
      other interfaces. So I've added that too with more details below as it
      works just fine.
      
      The ttyUSB ports on Droid 4 are:
      
      ttyUSB0 DIAG, CQDM-capable
      ttyUSB1 MUX or NMEA, no response
      ttyUSB2 MUX or NMEA, no response
      ttyUSB3 TCMD
      ttyUSB4 AT-capable
      
      The ttyUSB0 is detected as QCDM capable by ModemManager. I think
      it's only used for debugging with ModemManager --debug for sending
      custom AT commands though. ModemManager already can manage data
      connection using the USB QMI ports that are already handled by the
      qmi_wwan.c driver.
      
      To enable the MUX or NMEA ports, it seems that something needs to be
      done additionally to enable them, maybe via the DIAG or TCMD port.
      It might be just a NVRAM setting somewhere, but I have no idea what
      NVRAM settings may need changing for that.
      
      The TCMD port seems to be a Motorola custom protocol for testing
      the modem and to configure it's NVRAM and seems to work just fine
      based on a quick test with a minimal tcmdrw tool I wrote.
      
      The voice modem AT-capable port seems to provide only partial
      support, and no PM support compared to the TS 27.010 based UART
      wired directly to the modem.
      
      The UARTs added with this change are the same product IDs as the
      Motorola Mapphone Android Linux kernel mdm6600_id_table. I don't
      have any mdm9600 based devices, so I have only tested these on
      mdm6600 based droid 4.
      
      Then for the class 0x0a (CDC Data) mode, the Motorola Mapphone Android
      Linux kernel driver moto_flashqsc.c just seems to change the
      port->bulk_out_size to 8K from the default. And is only used for
      flashing the modem firmware it seems.
      
      I've verified that flashing the modem with signed firmware works just
      fine with the option driver after manually toggling the GPIO pins, so
      I've added droid 4 modem flashing mode to the option driver. I've not
      added the other devices listed in moto_flashqsc.c in case they really
      need different port->bulk_out_size. Those can be added as they get
      tested to work for flashing the modem.
      
      After this patch the output of /sys/kernel/debug/usb/devices has
      the following for normal 22b8:2a70 mode including the related qmi_wwan
      interfaces:
      
      T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12   MxCh= 0
      D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
      P:  Vendor=22b8 ProdID=2a70 Rev= 0.00
      S:  Manufacturer=Motorola, Incorporated
      S:  Product=Flash MZ600
      C:* #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=500mA
      I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
      E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
      E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
      I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
      E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
      E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
      I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
      E:  Ad=83(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
      E:  Ad=03(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
      I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
      E:  Ad=84(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
      E:  Ad=04(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
      I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
      E:  Ad=85(I) Atr=03(Int.) MxPS=  64 Ivl=5ms
      E:  Ad=86(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
      E:  Ad=05(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
      I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fb Prot=ff Driver=qmi_wwan
      E:  Ad=87(I) Atr=03(Int.) MxPS=  64 Ivl=5ms
      E:  Ad=88(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
      E:  Ad=06(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
      I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fb Prot=ff Driver=qmi_wwan
      E:  Ad=89(I) Atr=03(Int.) MxPS=  64 Ivl=5ms
      E:  Ad=8a(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
      E:  Ad=07(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
      I:* If#= 7 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fb Prot=ff Driver=qmi_wwan
      E:  Ad=8b(I) Atr=03(Int.) MxPS=  64 Ivl=5ms
      E:  Ad=8c(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
      E:  Ad=08(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
      I:* If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fb Prot=ff Driver=qmi_wwan
      E:  Ad=8d(I) Atr=03(Int.) MxPS=  64 Ivl=5ms
      E:  Ad=8e(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
      E:  Ad=09(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
      
      In 22b8:900e "qc_dload" mode the device shows up as:
      
      T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12   MxCh= 0
      D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
      P:  Vendor=22b8 ProdID=900e Rev= 0.00
      S:  Manufacturer=Motorola, Incorporated
      S:  Product=Flash MZ600
      C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=500mA
      I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
      E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
      E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
      
      And in 22b8:4281 "ram_downloader" mode the device shows up as:
      
      T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12   MxCh= 0
      D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
      P:  Vendor=22b8 ProdID=4281 Rev= 0.00
      S:  Manufacturer=Motorola, Incorporated
      S:  Product=Flash MZ600
      C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=500mA
      I:* If#= 0 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=fc Driver=option
      E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
      E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
      
      Cc: Bjørn Mork <bjorn@mork.no>
      Cc: Dan Williams <dan.j.williams@intel.com>
      Cc: Lars Melin <larsm17@gmail.com>
      Cc: Marcel Partap <mpartap@gmx.net>
      Cc: Merlijn Wajer <merlijn@wizzup.org>
      Cc: Michael Scott <hashcode0f@gmail.com>
      Cc: NeKit <nekit1000@gmail.com>
      Cc: Pavel Machek <pavel@ucw.cz>
      Cc: Sebastian Reichel <sre@kernel.org>
      Tested-by: default avatarPavel Machek <pavel@ucw.cz>
      Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
      Cc: stable <stable@vger.kernel.org>
      Signed-off-by: default avatarJohan Hovold <johan@kernel.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      3ca5b7b4
    • Bob Ham's avatar
      USB: serial: option: add the BroadMobi BM818 card · e480d6cf
      Bob Ham authored
      commit e5d8badf upstream.
      
      Add a VID:PID for the BroadMobi BM818 M.2 card
      
      T:  Bus=01 Lev=03 Prnt=40 Port=03 Cnt=01 Dev#= 44 Spd=480 MxCh= 0
      D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
      P:  Vendor=2020 ProdID=2060 Rev=00.00
      S:  Manufacturer=Qualcomm, Incorporated
      S:  Product=Qualcomm CDMA Technologies MSM
      C:  #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
      I:  If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
      I:  If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
      I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
      I:  If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=(none)
      I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
      Signed-off-by: default avatarBob Ham <bob.ham@puri.sm>
      Signed-off-by: default avatarAngus Ainslie (Purism) <angus@akkea.ca>
      Cc: stable <stable@vger.kernel.org>
      [ johan: use USB_DEVICE_INTERFACE_CLASS() ]
      Signed-off-by: default avatarJohan Hovold <johan@kernel.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      e480d6cf
    • Yoshiaki Okamoto's avatar
      USB: serial: option: Add support for ZTE MF871A · 8175fa29
      Yoshiaki Okamoto authored
      commit 7e7ae38b upstream.
      
      This patch adds support for MF871A USB modem (aka Speed USB STICK U03)
      to option driver. This modem is manufactured by ZTE corporation, and
      sold by KDDI.
      
      Interface layout:
      0: AT
      1: MODEM
      
      usb-devices output:
      T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  9 Spd=480 MxCh= 0
      D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
      P:  Vendor=19d2 ProdID=1481 Rev=52.87
      S:  Manufacturer=ZTE,Incorporated
      S:  Product=ZTE Technologies MSM
      S:  SerialNumber=1234567890ABCDEF
      C:  #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
      I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
      I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
      Co-developed-by: default avatarHiroyuki Yamamoto <hyamamo@allied-telesis.co.jp>
      Signed-off-by: default avatarHiroyuki Yamamoto <hyamamo@allied-telesis.co.jp>
      Signed-off-by: default avatarYoshiaki Okamoto <yokamoto@allied-telesis.co.jp>
      Cc: stable <stable@vger.kernel.org>
      Signed-off-by: default avatarJohan Hovold <johan@kernel.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      8175fa29
    • Rogan Dawes's avatar
      USB: serial: option: add D-Link DWM-222 device ID · afb677b2
      Rogan Dawes authored
      commit 552573e4 upstream.
      
      Add device id for D-Link DWM-222 A2.
      
      MI_00 D-Link HS-USB Diagnostics
      MI_01 D-Link HS-USB Modem
      MI_02 D-Link HS-USB AT Port
      MI_03 D-Link HS-USB NMEA
      MI_04 D-Link HS-USB WWAN Adapter (qmi_wwan)
      MI_05 USB Mass Storage Device
      
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarRogan Dawes <rogan@dawes.za.net>
      Signed-off-by: default avatarJohan Hovold <johan@kernel.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      afb677b2
    • Oliver Neukum's avatar
      USB: CDC: fix sanity checks in CDC union parser · 487d66ae
      Oliver Neukum authored
      commit 54364278 upstream.
      
      A few checks checked for the size of the pointer to a structure
      instead of the structure itself. Copy & paste issue presumably.
      
      Fixes: e4c6fb77 ("usbnet: move the CDC parser into USB core")
      Cc: stable <stable@vger.kernel.org>
      Reported-by: syzbot+45a53506b65321c1fe91@syzkaller.appspotmail.com
      Signed-off-by: default avatarOliver Neukum <oneukum@suse.com>
      Link: https://lore.kernel.org/r/20190813093541.18889-1-oneukum@suse.comSigned-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      487d66ae