The maintainer uses both.

Link: https://lkml.kernel.org/r/20240117122257.2707637-1-pvorel@suse.czSigned-off-by: Petr Vorel <pvorel@suse.cz>
Reviewed-by: Alejandro Colomar <alx@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

While investigating hosts with high cgroup memory pressures, Tejun
found culprit zombie tasks that had were holding on to a lot of
memory, had SIGKILL pending, but were stuck in memory.high reclaim.

In the past, we used to always force-charge allocations from tasks
that were exiting in order to accelerate them dying and freeing up
their rss. This changed for memory.max in a4ebf1b6 ("memcg:
prohibit unconditional exceeding the limit of dying tasks"); it noted
that this can cause (userspace inducable) containment failures, so it
added a mandatory reclaim and OOM kill cycle before forcing charges.
At the time, memory.high enforcement was handled in the userspace
return path, which isn't reached by dying tasks, and so memory.high
was still never enforced by dying tasks.

When c9afe31e ("memcg: synchronously enforce memory.high for large
overcharges") added synchronous reclaim for memory.high, it added
unconditional memory.high enforcement for dying tasks as well. The
callstack shows that this path is where the zombie is stuck in.

We need to accelerate dying tasks getting past memory.high, but we
cannot do it quite the same way as we do for memory.max: memory.max is
enforced strictly, and tasks aren't allowed to move past it without
FIRST reclaiming and OOM killing if necessary. This ensures very small
levels of excess. With memory.high, though, enforcement happens lazily
after the charge, and OOM killing is never triggered. A lot of
concurrent threads could have pushed, or could actively be pushing,
the cgroup into excess. The dying task will enter reclaim on every
allocation attempt, with little hope of restoring balance.

To fix this, skip synchronous memory.high enforcement on dying tasks
altogether again. Update memory.high path documentation while at it.

[hannes@cmpxchg.org: also handle tasks are being killed during the reclaim]
  Link: https://lkml.kernel.org/r/20240111192807.GA424308@cmpxchg.org
Link: https://lkml.kernel.org/r/20240111132902.389862-1-hannes@cmpxchg.org
Fixes: c9afe31e ("memcg: synchronously enforce memory.high for large overcharges")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Dan Schatzberg <schatzberg.dan@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

commit efa7df3e ("mm: align larger anonymous mappings on THP
boundaries") incured regression for stress-ng pthread benchmark [1].  It
is because THP get allocated to pthread's stack area much more possible
than before.  Pthread's stack area is allocated by mmap without
VM_GROWSDOWN or VM_GROWSUP flag, so kernel can't tell whether it is a
stack area or not.

The MAP_STACK flag is used to mark the stack area, but it is a no-op on
Linux.  Mapping MAP_STACK to VM_NOHUGEPAGE to prevent from allocating THP
for such stack area.

With this change the stack area looks like:

fffd18e10000-fffd19610000 rw-p 00000000 00:00 0
Size:               8192 kB
KernelPageSize:        4 kB
MMUPageSize:           4 kB
Rss:                  12 kB
Pss:                  12 kB
Pss_Dirty:            12 kB
Shared_Clean:          0 kB
Shared_Dirty:          0 kB
Private_Clean:         0 kB
Private_Dirty:        12 kB
Referenced:           12 kB
Anonymous:            12 kB
KSM:                   0 kB
LazyFree:              0 kB
AnonHugePages:         0 kB
ShmemPmdMapped:        0 kB
FilePmdMapped:         0 kB
Shared_Hugetlb:        0 kB
Private_Hugetlb:       0 kB
Swap:                  0 kB
SwapPss:               0 kB
Locked:                0 kB
THPeligible:           0
VmFlags: rd wr mr mw me ac nh

The "nh" flag is set.

[1] https://lore.kernel.org/linux-mm/202312192310.56367035-oliver.sang@intel.com/

Link: https://lkml.kernel.org/r/20231221065943.2803551-2-shy828301@gmail.com
Fixes: efa7df3e ("mm: align larger anonymous mappings on THP boundaries")
Signed-off-by: Yang Shi <yang@os.amperecomputing.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Tested-by: Oliver Sang <oliver.sang@intel.com>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christopher Lameter <cl@linux.com>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: <stable@vger.kerenl.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

uprobes passes an unaligned page mapping address to
folio_add_new_anon_rmap(), which ends up triggering a VM_BUG_ON() we
recently extended in commit 372cbd4d ("mm: non-pmd-mappable, large
folios for folio_add_new_anon_rmap()").

Arguably, this is uprobes code doing something wrong; however, for the
time being it would have likely worked in rmap code because
__folio_set_anon() would set folio->index to the same value.

Looking at __replace_page(), we'd also pass slightly wrong values to
mmu_notifier_range_init(), page_vma_mapped_walk(), flush_cache_page(),
ptep_clear_flush() and set_pte_at_notify().  I suspect most of them are
fine, but let's just mark the introducing commit as the one needed fixing.
I don't think CC stable is warranted.

We'll add more sanity checks in rmap code separately, to make sure that we
always get properly aligned addresses.

Link: https://lkml.kernel.org/r/20240115100731.91007-1-david@redhat.com
Fixes: c517ee74 ("uprobes: __replace_page() should not use page_address_in_vma()")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Jiri Olsa <jolsa@kernel.org>
Closes: https://lkml.kernel.org/r/ZaMR2EWN-HvlCfUl@kravaTested-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Use 2 separate variables of types int and unsigned long long instead of
confusing them.  This corrects the correct print format for each of them
and removes the build warning:

warning: format `%d' expects argument of type `int', but argument 2 has type `long long unsigned int'

Link: https://lkml.kernel.org/r/20240112071851.612930-1-usama.anjum@collabora.com
Fixes: a4cb3b24 ("selftests: mm: add a test for remapping to area immediately after existing mapping")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

has_extra_refcount() makes the assumption that the page cache adds a ref
count of 1 and subtracts this in the extra_pins case.  Commit a08c7193
(mm/filemap: remove hugetlb special casing in filemap.c) modifies
__filemap_add_folio() by calling folio_ref_add(folio, nr); for all cases
(including hugtetlb) where nr is the number of pages in the folio.  We
should adjust the number of references coming from the page cache by
subtracing the number of pages rather than 1.

In hugetlbfs_read_iter(), folio_test_has_hwpoisoned() is testing the wrong
flag as, in the hugetlb case, memory-failure code calls
folio_test_set_hwpoison() to indicate poison.  folio_test_hwpoison() is
the correct function to test for that flag.

After these fixes, the hugetlb hwpoison read selftest passes all cases.

Link: https://lkml.kernel.org/r/20240112180840.367006-1-sidhartha.kumar@oracle.com
Fixes: a08c7193 ("mm/filemap: remove hugetlb special casing in filemap.c")
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Closes: https://lore.kernel.org/linux-mm/20230713001833.3778937-1-jiaqiyan@google.com/T/#m8e1469119e5b831bbd05d495f96b842e4a1c5519Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Muchun Song <muchun.song@linux.dev>
Cc: James Houghton <jthoughton@google.com>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: <stable@vger.kernel.org>	[6.7+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

ra_alloc_folio() marks a page that should trigger next round of async
readahead.  However it rounds up computed index to the order of page being
allocated.  This can however lead to multiple consecutive pages being
marked with readahead flag.  Consider situation with index == 1, mark ==
1, order == 0.  We insert order 0 page at index 1 and mark it.  Then we
bump order to 1, index to 2, mark (still == 1) is rounded up to 2 so page
at index 2 is marked as well.  Then we bump order to 2, index is
incremented to 4, mark gets rounded to 4 so page at index 4 is marked as
well.  The fact that multiple pages get marked within a single readahead
window confuses the readahead logic and results in readahead window being
trimmed back to 1.  This situation is triggered in particular when maximum
readahead window size is not a power of two (in the observed case it was
768 KB) and as a result sequential read throughput suffers.

Fix the problem by rounding 'mark' down instead of up.  Because the index
is naturally aligned to 'order', we are guaranteed 'rounded mark' == index
iff 'mark' is within the page we are allocating at 'index' and thus
exactly one page is marked with readahead flag as required by the
readahead code and sequential read performance is restored.

This effectively reverts part of commit b9ff43dd ("mm/readahead: Fix
readahead with large folios").  The commit changed the rounding with the
rationale:

"...  we were setting the readahead flag on the folio which contains the
last byte read from the block.  This is wrong because we will trigger
readahead at the end of the read without waiting to see if a subsequent
read is going to use the pages we just read."

Although this is true, the fact is this was always the case with read
sizes not aligned to folio boundaries and large folios in the page cache
just make the situation more obvious (and frequent).  Also for sequential
read workloads it is better to trigger the readahead earlier rather than
later.  It is true that the difference in the rounding and thus earlier
triggering of the readahead can result in reading more for semi-random
workloads.  However workloads really suffering from this seem to be rare. 
In particular I have verified that the workload described in commit
b9ff43dd ("mm/readahead: Fix readahead with large folios") of reading
random 100k blocks from a file like:

[reader]
bs=100k
rw=randread
numjobs=1
size=64g
runtime=60s

is not impacted by the rounding change and achieves ~70MB/s in both cases.

[jack@suse.cz: fix one more place where mark rounding was done as well]
  Link: https://lkml.kernel.org/r/20240123153254.5206-1-jack@suse.cz
Link: https://lkml.kernel.org/r/20240104085839.21029-1-jack@suse.cz
Fixes: b9ff43dd ("mm/readahead: Fix readahead with large folios")
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Guo Xuenan <guoxuenan@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Pull more bcachefs updates from Kent Overstreet:
 "Some fixes, Some refactoring, some minor features:

   - Assorted prep work for disk space accounting rewrite

   - BTREE_TRIGGER_ATOMIC: after combining our trigger callbacks, this
     makes our trigger context more explicit

   - A few fixes to avoid excessive transaction restarts on
     multithreaded workloads: fstests (in addition to ktest tests) are
     now checking slowpath counters, and that's shaking out a few bugs

   - Assorted tracepoint improvements

   - Starting to break up bcachefs_format.h and move on disk types so
     they're with the code they belong to; this will make room to start
     documenting the on disk format better.

   - A few minor fixes"

* tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefs: (46 commits)
  bcachefs: Improve inode_to_text()
  bcachefs: logged_ops_format.h
  bcachefs: reflink_format.h
  bcachefs; extents_format.h
  bcachefs: ec_format.h
  bcachefs: subvolume_format.h
  bcachefs: snapshot_format.h
  bcachefs: alloc_background_format.h
  bcachefs: xattr_format.h
  bcachefs: dirent_format.h
  bcachefs: inode_format.h
  bcachefs; quota_format.h
  bcachefs: sb-counters_format.h
  bcachefs: counters.c -> sb-counters.c
  bcachefs: comment bch_subvolume
  bcachefs: bch_snapshot::btime
  bcachefs: add missing __GFP_NOWARN
  bcachefs: opts->compression can now also be applied in the background
  bcachefs: Prep work for variable size btree node buffers
  bcachefs: grab s_umount only if snapshotting
  ...

Pull timer updates from Thomas Gleixner:
 "Updates for time and clocksources:

   - A fix for the idle and iowait time accounting vs CPU hotplug.

     The time is reset on CPU hotplug which makes the accumulated
     systemwide time jump backwards.

   - Assorted fixes and improvements for clocksource/event drivers"

* tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug
  clocksource/drivers/ep93xx: Fix error handling during probe
  clocksource/drivers/cadence-ttc: Fix some kernel-doc warnings
  clocksource/drivers/timer-ti-dm: Fix make W=n kerneldoc warnings
  clocksource/timer-riscv: Add riscv_clock_shutdown callback
  dt-bindings: timer: Add StarFive JH8100 clint
  dt-bindings: timer: thead,c900-aclint-mtimer: separate mtime and mtimecmp regs

Pull powerpc fixes from Aneesh Kumar:

 - Increase default stack size to 32KB for Book3S

Thanks to Michael Ellerman.

* tag 'powerpc-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: Increase default stack size to 32KB

Add line breaks - inode_to_text() is now much easier to read.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs_format.h has gotten too big; let's do some organizing.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Add a field to bch_snapshot for creation time; this will be important
when we start exposing the snapshot tree to userspace.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

The "apply this compression method in the background" paths now use the
compression option if background_compression is not set; this means that
setting or changing the compression option will cause existing data to
be compressed accordingly in the background.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs btree nodes are big - typically 256k - and btree roots are
pinned in memory. As we're now up to 18 btrees, we now have significant
memory overhead in mostly empty btree roots.

And in the future we're going to start enforcing that certain btree node
boundaries exist, to solve lock contention issues - analagous to XFS's
AGIs.

Thus, we need to start allocating smaller btree node buffers when we
can. This patch changes code that refers to the filesystem constant
c->opts.btree_node_size to refer to the btree node buffer size -
btree_buf_bytes() - where appropriate.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

When I was testing mongodb over bcachefs with compression,
there is a lockdep warning when snapshotting mongodb data volume.

$ cat test.sh
prog=bcachefs

$prog subvolume create /mnt/data
$prog subvolume create /mnt/data/snapshots

while true;do
    $prog subvolume snapshot /mnt/data /mnt/data/snapshots/$(date +%s)
    sleep 1s
done

$ cat /etc/mongodb.conf
systemLog:
  destination: file
  logAppend: true
  path: /mnt/data/mongod.log

storage:
  dbPath: /mnt/data/

lockdep reports:
[ 3437.452330] ======================================================
[ 3437.452750] WARNING: possible circular locking dependency detected
[ 3437.453168] 6.7.0-rc7-custom+ #85 Tainted: G            E
[ 3437.453562] ------------------------------------------------------
[ 3437.453981] bcachefs/35533 is trying to acquire lock:
[ 3437.454325] ffffa0a02b2b1418 (sb_writers#10){.+.+}-{0:0}, at: filename_create+0x62/0x190
[ 3437.454875]
               but task is already holding lock:
[ 3437.455268] ffffa0a02b2b10e0 (&type->s_umount_key#48){.+.+}-{3:3}, at: bch2_fs_file_ioctl+0x232/0xc90 [bcachefs]
[ 3437.456009]
               which lock already depends on the new lock.

[ 3437.456553]
               the existing dependency chain (in reverse order) is:
[ 3437.457054]
               -> #3 (&type->s_umount_key#48){.+.+}-{3:3}:
[ 3437.457507]        down_read+0x3e/0x170
[ 3437.457772]        bch2_fs_file_ioctl+0x232/0xc90 [bcachefs]
[ 3437.458206]        __x64_sys_ioctl+0x93/0xd0
[ 3437.458498]        do_syscall_64+0x42/0xf0
[ 3437.458779]        entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 3437.459155]
               -> #2 (&c->snapshot_create_lock){++++}-{3:3}:
[ 3437.459615]        down_read+0x3e/0x170
[ 3437.459878]        bch2_truncate+0x82/0x110 [bcachefs]
[ 3437.460276]        bchfs_truncate+0x254/0x3c0 [bcachefs]
[ 3437.460686]        notify_change+0x1f1/0x4a0
[ 3437.461283]        do_truncate+0x7f/0xd0
[ 3437.461555]        path_openat+0xa57/0xce0
[ 3437.461836]        do_filp_open+0xb4/0x160
[ 3437.462116]        do_sys_openat2+0x91/0xc0
[ 3437.462402]        __x64_sys_openat+0x53/0xa0
[ 3437.462701]        do_syscall_64+0x42/0xf0
[ 3437.462982]        entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 3437.463359]
               -> #1 (&sb->s_type->i_mutex_key#15){+.+.}-{3:3}:
[ 3437.463843]        down_write+0x3b/0xc0
[ 3437.464223]        bch2_write_iter+0x5b/0xcc0 [bcachefs]
[ 3437.464493]        vfs_write+0x21b/0x4c0
[ 3437.464653]        ksys_write+0x69/0xf0
[ 3437.464839]        do_syscall_64+0x42/0xf0
[ 3437.465009]        entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 3437.465231]
               -> #0 (sb_writers#10){.+.+}-{0:0}:
[ 3437.465471]        __lock_acquire+0x1455/0x21b0
[ 3437.465656]        lock_acquire+0xc6/0x2b0
[ 3437.465822]        mnt_want_write+0x46/0x1a0
[ 3437.465996]        filename_create+0x62/0x190
[ 3437.466175]        user_path_create+0x2d/0x50
[ 3437.466352]        bch2_fs_file_ioctl+0x2ec/0xc90 [bcachefs]
[ 3437.466617]        __x64_sys_ioctl+0x93/0xd0
[ 3437.466791]        do_syscall_64+0x42/0xf0
[ 3437.466957]        entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 3437.467180]
               other info that might help us debug this:

[ 3437.469670] 2 locks held by bcachefs/35533:
               other info that might help us debug this:

[ 3437.467507] Chain exists of:
                 sb_writers#10 --> &c->snapshot_create_lock --> &type->s_umount_key#48

[ 3437.467979]  Possible unsafe locking scenario:

[ 3437.468223]        CPU0                    CPU1
[ 3437.468405]        ----                    ----
[ 3437.468585]   rlock(&type->s_umount_key#48);
[ 3437.468758]                                lock(&c->snapshot_create_lock);
[ 3437.469030]                                lock(&type->s_umount_key#48);
[ 3437.469291]   rlock(sb_writers#10);
[ 3437.469434]
                *** DEADLOCK ***

[ 3437.469670] 2 locks held by bcachefs/35533:
[ 3437.469838]  #0: ffffa0a02ce00a88 (&c->snapshot_create_lock){++++}-{3:3}, at: bch2_fs_file_ioctl+0x1e3/0xc90 [bcachefs]
[ 3437.470294]  #1: ffffa0a02b2b10e0 (&type->s_umount_key#48){.+.+}-{3:3}, at: bch2_fs_file_ioctl+0x232/0xc90 [bcachefs]
[ 3437.470744]
               stack backtrace:
[ 3437.470922] CPU: 7 PID: 35533 Comm: bcachefs Kdump: loaded Tainted: G            E      6.7.0-rc7-custom+ #85
[ 3437.471313] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
[ 3437.471694] Call Trace:
[ 3437.471795]  <TASK>
[ 3437.471884]  dump_stack_lvl+0x57/0x90
[ 3437.472035]  check_noncircular+0x132/0x150
[ 3437.472202]  __lock_acquire+0x1455/0x21b0
[ 3437.472369]  lock_acquire+0xc6/0x2b0
[ 3437.472518]  ? filename_create+0x62/0x190
[ 3437.472683]  ? lock_is_held_type+0x97/0x110
[ 3437.472856]  mnt_want_write+0x46/0x1a0
[ 3437.473025]  ? filename_create+0x62/0x190
[ 3437.473204]  filename_create+0x62/0x190
[ 3437.473380]  user_path_create+0x2d/0x50
[ 3437.473555]  bch2_fs_file_ioctl+0x2ec/0xc90 [bcachefs]
[ 3437.473819]  ? lock_acquire+0xc6/0x2b0
[ 3437.474002]  ? __fget_files+0x2a/0x190
[ 3437.474195]  ? __fget_files+0xbc/0x190
[ 3437.474380]  ? lock_release+0xc5/0x270
[ 3437.474567]  ? __x64_sys_ioctl+0x93/0xd0
[ 3437.474764]  ? __pfx_bch2_fs_file_ioctl+0x10/0x10 [bcachefs]
[ 3437.475090]  __x64_sys_ioctl+0x93/0xd0
[ 3437.475277]  do_syscall_64+0x42/0xf0
[ 3437.475454]  entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 3437.475691] RIP: 0033:0x7f2743c313af
======================================================

In __bch2_ioctl_subvolume_create(), we grab s_umount unconditionally
and unlock it at the end of the function. There is a comment
"why do we need this lock?" about the lock coming from
commit 42d23732 ("bcachefs: Snapshot creation, deletion")
The reason is that __bch2_ioctl_subvolume_create() calls
sync_inodes_sb() which enforce locked s_umount to writeback all dirty
nodes before doing snapshot works.

Fix it by read locking s_umount for snapshotting only and unlocking
s_umount after sync_inodes_sb().
Signed-off-by: Su Yue <glass.su@suse.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bch_fs::snapshots is allocated by kvzalloc in __snapshot_t_mut.
It should be freed by kvfree not kfree.
Or umount will triger:

[  406.829178 ] BUG: unable to handle page fault for address: ffffe7b487148008
[  406.830676 ] #PF: supervisor read access in kernel mode
[  406.831643 ] #PF: error_code(0x0000) - not-present page
[  406.832487 ] PGD 0 P4D 0
[  406.832898 ] Oops: 0000 [#1] PREEMPT SMP PTI
[  406.833512 ] CPU: 2 PID: 1754 Comm: umount Kdump: loaded Tainted: G           OE      6.7.0-rc7-custom+ #90
[  406.834746 ] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
[  406.835796 ] RIP: 0010:kfree+0x62/0x140
[  406.836197 ] Code: 80 48 01 d8 0f 82 e9 00 00 00 48 c7 c2 00 00 00 80 48 2b 15 78 9f 1f 01 48 01 d0 48 c1 e8 0c 48 c1 e0 06 48 03 05 56 9f 1f 01 <48> 8b 50 08 48 89 c7 f6 c2 01 0f 85 b0 00 00 00 66 90 48 8b 07 f6
[  406.837810 ] RSP: 0018:ffffb9d641607e48 EFLAGS: 00010286
[  406.838213 ] RAX: ffffe7b487148000 RBX: ffffb9d645200000 RCX: ffffb9d641607dc4
[  406.838738 ] RDX: 000065bb00000000 RSI: ffffffffc0d88b84 RDI: ffffb9d645200000
[  406.839217 ] RBP: ffff9a4625d00068 R08: 0000000000000001 R09: 0000000000000001
[  406.839650 ] R10: 0000000000000001 R11: 000000000000001f R12: ffff9a4625d4da80
[  406.840055 ] R13: ffff9a4625d00000 R14: ffffffffc0e2eb20 R15: 0000000000000000
[  406.840451 ] FS:  00007f0a264ffb80(0000) GS:ffff9a4e2d500000(0000) knlGS:0000000000000000
[  406.840851 ] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  406.841125 ] CR2: ffffe7b487148008 CR3: 000000018c4d2000 CR4: 00000000000006f0
[  406.841464 ] Call Trace:
[  406.841583 ]  <TASK>
[  406.841682 ]  ? __die+0x1f/0x70
[  406.841828 ]  ? page_fault_oops+0x159/0x470
[  406.842014 ]  ? fixup_exception+0x22/0x310
[  406.842198 ]  ? exc_page_fault+0x1ed/0x200
[  406.842382 ]  ? asm_exc_page_fault+0x22/0x30
[  406.842574 ]  ? bch2_fs_release+0x54/0x280 [bcachefs]
[  406.842842 ]  ? kfree+0x62/0x140
[  406.842988 ]  ? kfree+0x104/0x140
[  406.843138 ]  bch2_fs_release+0x54/0x280 [bcachefs]
[  406.843390 ]  kobject_put+0xb7/0x170
[  406.843552 ]  deactivate_locked_super+0x2f/0xa0
[  406.843756 ]  cleanup_mnt+0xba/0x150
[  406.843917 ]  task_work_run+0x59/0xa0
[  406.844083 ]  exit_to_user_mode_prepare+0x197/0x1a0
[  406.844302 ]  syscall_exit_to_user_mode+0x16/0x40
[  406.844510 ]  do_syscall_64+0x4e/0xf0
[  406.844675 ]  entry_SYSCALL_64_after_hwframe+0x6e/0x76
[  406.844907 ] RIP: 0033:0x7f0a2664e4fb
Signed-off-by: Su Yue <glass.su@suse.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Fixes: 023f9ac9 bcachefs: Delete dio read alignment check
Reported-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

The variable tmp is being assigned a value but it isn't being
read afterwards. The assignment is redundant and so tmp can be
removed.

Cleans up clang scan build warning:
warning: Although the value stored to 'ret' is used in the enclosing
expression, the value is never actually read from 'ret'
[deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

drop_locks_do() should not be used in a fastpath without first trying
the do in nonblocking mode - the unlock and relock will cause excessive
transaction restarts and potentially livelocking with other threads that
are contending for the same locks.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Factor out bch2_journal_bufs_to_text(), and use it in the
journal_entry_full() tracepoint; when we can't get a journal reservation
we need to know the outstanding journal entry sizes to know if the
problem is due to excessive flushing.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>