- 16 Jan, 2019 40 commits
-
-
Mattias Jacobsson authored
BugLink: https://bugs.launchpad.net/bugs/1810958 commit f6501f49 upstream. Add another Apple Cinema Display to the list of supported displays Signed-off-by:
Mattias Jacobsson <2pi@mok.nu> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Juerg Haefliger <juergh@canonical.com> Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Nathan Chancellor authored
BugLink: https://bugs.launchpad.net/bugs/1810958 commit 7c973012 upstream. After building the kernel with Clang, the following section mismatch warning appears: WARNING: vmlinux.o(.text+0x3bf19a6): Section mismatch in reference from the function ssc_probe() to the function .init.text:atmel_ssc_get_driver_data() The function ssc_probe() references the function __init atmel_ssc_get_driver_data(). This is often because ssc_probe lacks a __init annotation or the annotation of atmel_ssc_get_driver_data is wrong. Remove __init from atmel_ssc_get_driver_data to get rid of the mismatch. Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Emmanuel Pescosta authored
BugLink: https://bugs.launchpad.net/bugs/1810958 commit a7711257 upstream. Following on from this patch: https://lkml.org/lkml/2017/11/3/516, Corsair K70 LUX RGB keyboards also require the DELAY_INIT quirk to start correctly at boot. Dmesg output: usb 1-6: string descriptor 0 read error: -110 usb 1-6: New USB device found, idVendor=1b1c, idProduct=1b33 usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-6: can't set config #1, error -110 Signed-off-by:
Emmanuel Pescosta <emmanuelpescosta099@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Kai-Heng Feng authored
BugLink: https://bugs.launchpad.net/bugs/1810958 commit deefd242 upstream. Raydium USB touchscreen fails to set config if LPM is enabled: [ 2.030658] usb 1-8: New USB device found, idVendor=2386, idProduct=3119 [ 2.030659] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.030660] usb 1-8: Product: Raydium Touch System [ 2.030661] usb 1-8: Manufacturer: Raydium Corporation [ 7.132209] usb 1-8: can't set config #1, error -110 Same behavior can be observed on 2386:3114. Raydium claims the touchscreen supports LPM under Windows, so I used Microsoft USB Test Tools (MUTT) [1] to check its LPM status. MUTT shows that the LPM doesn't work under Windows, either. So let's just disable LPM for Raydium touchscreens. [1] https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/usb-test-toolsSigned-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Maarten Jacobs authored
BugLink: https://bugs.launchpad.net/bugs/1810958 commit 63529eaa upstream. The cdc-acm kernel module currently does not support the Hiro (Conexant) H05228 USB modem. The patch below adds the device specific information: idVendor 0x0572 idProduct 0x1349 Signed-off-by:
Maarten Jacobs <maarten256@outlook.com> Acked-by:
Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1810958 commit 43279819 upstream. I was trying to solve a double free but I introduced a more serious NULL dereference bug. The problem is that if there is an IRQ which triggers immediately, then we need "info->uio_dev" but it's not set yet. This patch puts the original initialization back to how it was and just sets info->uio_dev to NULL on the error path so it should solve both the Oops and the double free. Fixes: f019f07e ("uio: potential double frees if __uio_register_device() fails") Reported-by:
Mathias Thore <Mathias.Thore@infinera.com> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: stable <stable@vger.kernel.org> Tested-by:
-
Sakari Ailus authored
BugLink: https://bugs.launchpad.net/bugs/1810958 commit 92539d3e upstream. Patch ad608fbc changed how events were subscribed to address an issue elsewhere. As a side effect of that change, the "add" callback was called before the event subscription was added to the list of subscribed events, causing the first event queued by the add callback (and possibly other events arriving soon afterwards) to be lost. Fix this by adding the subscription to the list before calling the "add" callback, and clean up afterwards if that fails. Fixes: ad608fbc ("media: v4l: event: Prevent freeing event subscriptions while accessed") Reported-by:
Dave Stevenson <dave.stevenson@raspberrypi.org> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by:
Hans Verkuil <hans.verkuil@cisco.com> Tested-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> [Sakari Ailus: Backported to v4.9 stable] Signed-off-by:
-
Hans Verkuil authored
BugLink: https://bugs.launchpad.net/bugs/1810958 This reverts commit 46431d9c. This commit fixes a bug in upstream commit a136f59c ("vb2: Move buffer cache synchronisation to prepare from queue") which isn't present in 4.4. So as a result you get an UNBALANCED message in the kernel log if this patch is applied: vb2: counters for queue ffffffc0f3687478, buffer 3: UNBALANCED! vb2: buf_init: 1 buf_cleanup: 1 buf_prepare: 805 buf_finish: 805 vb2: buf_queue: 806 buf_done: 806 vb2: alloc: 0 put: 0 prepare: 806 finish: 805 mmap: 0 vb2: get_userptr: 0 put_userptr: 0 vb2: attach_dmabuf: 1 detach_dmabuf: 1 map_dmabuf: 805 unmap_dmabuf: 805 vb2: get_dmabuf: 0 num_users: 1609 vaddr: 0 cookie: 805 Reverting this patch solves this regression. Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
-
Lu Fengqi authored
BugLink: https://bugs.launchpad.net/bugs/1810958 commit fcd5e742 upstream. When running generic/475, we may get the following warning in dmesg: [ 6902.102154] WARNING: CPU: 3 PID: 18013 at fs/btrfs/extent-tree.c:9776 btrfs_free_block_groups+0x2af/0x3b0 [btrfs] [ 6902.109160] CPU: 3 PID: 18013 Comm: umount Tainted: G W O 4.19.0-rc8+ #8 [ 6902.110971] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 [ 6902.112857] RIP: 0010:btrfs_free_block_groups+0x2af/0x3b0 [btrfs] [ 6902.118921] RSP: 0018:ffffc9000459bdb0 EFLAGS: 00010286 [ 6902.120315] RAX: ffff880175050bb0 RBX: ffff8801124a8000 RCX: 0000000000170007 [ 6902.121969] RDX: 0000000000000002 RSI: 0000000000170007 RDI: ffffffff8125fb74 [ 6902.123716] RBP: ffff880175055d10 R08: 0000000000000000 R09: 0000000000000000 [ 6902.125417] R10: 0000000000000000 R11: 0000000000000000 R12: ffff880175055d88 [ 6902.127129] R13: ffff880175050bb0 R14: 0000000000000000 R15: dead000000000100 [ 6902.129060] FS: 00007f4507223780(0000) GS:ffff88017ba00000(0000) knlGS:0000000000000000 [ 6902.130996] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6902.132558] CR2: 00005623599cac78 CR3: 000000014b700001 CR4: 00000000003606e0 [ 6902.134270] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 6902.135981] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 6902.137836] Call Trace: [ 6902.138939] close_ctree+0x171/0x330 [btrfs] [ 6902.140181] ? kthread_stop+0x146/0x1f0 [ 6902.141277] generic_shutdown_super+0x6c/0x100 [ 6902.142517] kill_anon_super+0x14/0x30 [ 6902.143554] btrfs_kill_super+0x13/0x100 [btrfs] [ 6902.144790] deactivate_locked_super+0x2f/0x70 [ 6902.146014] cleanup_mnt+0x3b/0x70 [ 6902.147020] task_work_run+0x9e/0xd0 [ 6902.148036] do_syscall_64+0x470/0x600 [ 6902.149142] ? trace_hardirqs_off_thunk+0x1a/0x1c [ 6902.150375] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 6902.151640] RIP: 0033:0x7f45077a6a7b [ 6902.157324] RSP: 002b:00007ffd589f3e68 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 [ 6902.159187] RAX: 0000000000000000 RBX: 000055e8eec732b0 RCX: 00007f45077a6a7b [ 6902.160834] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 000055e8eec73490 [ 6902.162526] RBP: 0000000000000000 R08: 000055e8eec734b0 R09: 00007ffd589f26c0 [ 6902.164141] R10: 0000000000000000 R11: 0000000000000246 R12: 000055e8eec73490 [ 6902.165815] R13: 00007f4507ac61a4 R14: 0000000000000000 R15: 00007ffd589f40d8 [ 6902.167553] irq event stamp: 0 [ 6902.168998] hardirqs last enabled at (0): [<0000000000000000>] (null) [ 6902.170731] hardirqs last disabled at (0): [<ffffffff810cd810>] copy_process.part.55+0x3b0/0x1f00 [ 6902.172773] softirqs last enabled at (0): [<ffffffff810cd810>] copy_process.part.55+0x3b0/0x1f00 [ 6902.174671] softirqs last disabled at (0): [<0000000000000000>] (null) [ 6902.176407] ---[ end trace 463138c2986b275c ]--- [ 6902.177636] BTRFS info (device dm-3): space_info 4 has 273465344 free, is not full [ 6902.179453] BTRFS info (device dm-3): space_info total=276824064, used=4685824, pinned=18446744073708158976, reserved=0, may_use=0, readonly=65536 In the above line there's "pinned=18446744073708158976" which is an unsigned u64 value of -1392640, an obvious underflow. When transaction_kthread is running cleanup_transaction(), another fsstress is running btrfs_commit_transaction(). The btrfs_finish_extent_commit() may get the same range as btrfs_destroy_pinned_extent() got, which causes the pinned underflow. Fixes: d4b450cd ("Btrfs: fix race between transaction commit and empty block group removal") CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Lu Fengqi <lufq.fnst@cn.fujitsu.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Andreas Gruenbacher authored
BugLink: https://bugs.launchpad.net/bugs/1810958 commit 10283ea5 upstream. gfs2_put_super calls gfs2_clear_rgrpd to destroy the gfs2_rgrpd objects attached to the resource group glocks. That function should release the buffers attached to the gfs2_bitmap objects (bi_bh), but the call to gfs2_rgrp_brelse for doing that is missing. When gfs2_releasepage later runs across these buffers which are still referenced, it refuses to free them. This causes the pages the buffers are attached to to remain referenced as well. With enough mount/unmount cycles, the system will eventually run out of memory. Fix this by adding the missing call to gfs2_rgrp_brelse in gfs2_clear_rgrpd. (Also fix a gfs2_rgrp_relse -> gfs2_rgrp_brelse typo in a comment.) Fixes: 39b0f1e9 ("GFS2: Don't brelse rgrp buffer_heads every allocation") Cc: stable@vger.kernel.org # v4.4 Signed-off-by:
Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by:
-
YueHaibing authored
BugLink: https://bugs.launchpad.net/bugs/1810958 [ Upstream commit 025911a5 ] There is no need to have the '__be32 *p' variable static since new value always be assigned before use it. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Cc: stable@vger.kernel.org Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Minchan Kim authored
BugLink: https://bugs.launchpad.net/bugs/1810958 commit fef912bf upstream. commit 98af4d4d upstream. I got a report from Howard Chen that he saw zram and sysfs race(ie, zram block device file is created but sysfs for it isn't yet) when he tried to create new zram devices via hotadd knob. v4.20 kernel fixes it by [1, 2] but it's too large size to merge into -stable so this patch fixes the problem by registering defualt group by Greg KH's approach[3]. This patch should be applied to every stable tree [3.16+] currently existing from kernel.org because the problem was introduced at 2.6.37 by [4]. [1] fef912bf, block: genhd: add 'groups' argument to device_add_disk [2] 98af4d4d, zram: register default groups with device_add_disk() [3] http://kroah.com/log/blog/2013/06/26/how-to-create-a-sysfs-file-correctly/ [4] 33863c21, Staging: zram: Replace ioctls with sysfs interface Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Hannes Reinecke <hare@suse.com> Tested-by:
Howard Chen <howardsoc@google.com> Signed-off-by:
Minchan Kim <minchan@kernel.org> Signed-off-by:
-
Jeremy Linton authored
BugLink: https://bugs.launchpad.net/bugs/1810958 [ Upstream commit 313a06e6 ] The lib/raid6/test fails to build the neon objects on arm64 because the correct machine type is 'aarch64'. Once this is correctly enabled, the neon recovery objects need to be added to the build. Reviewed-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Jeremy Linton <jeremy.linton@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Geert Uytterhoeven authored
BugLink: https://bugs.launchpad.net/bugs/1810958 [ Upstream commit e3e61f01 ] If gcc decides not to inline make_sensor_label(): WARNING: vmlinux.o(.text+0x4df549c): Section mismatch in reference from the function .create_device_attrs() to the function .init.text:.make_sensor_label() The function .create_device_attrs() references the function __init .make_sensor_label(). This is often because .create_device_attrs lacks a __init annotation or the annotation of .make_sensor_label is wrong. As .probe() can be called after freeing of __init memory, all __init annotiations in the driver are bogus, and should be removed. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Taehee Yoo authored
BugLink: https://bugs.launchpad.net/bugs/1810958 [ Upstream commit 54451f60 ] When IDLETIMER rule is added, sysfs file is created under /sys/class/xt_idletimer/timers/ But some label name shouldn't be used. ".", "..", "power", "uevent", "subsystem", etc... So that sysfs filename checking routine is needed. test commands: %iptables -I INPUT -j IDLETIMER --timeout 1 --label "power" splat looks like: [95765.423132] sysfs: cannot create duplicate filename '/devices/virtual/xt_idletimer/timers/power' [95765.433418] CPU: 0 PID: 8446 Comm: iptables Not tainted 4.19.0-rc6+ #20 [95765.449755] Call Trace: [95765.449755] dump_stack+0xc9/0x16b [95765.449755] ? show_regs_print_info+0x5/0x5 [95765.449755] sysfs_warn_dup+0x74/0x90 [95765.449755] sysfs_add_file_mode_ns+0x352/0x500 [95765.449755] sysfs_create_file_ns+0x179/0x270 [95765.449755] ? sysfs_add_file_mode_ns+0x500/0x500 [95765.449755] ? idletimer_tg_checkentry+0x3e5/0xb1b [xt_IDLETIMER] [95765.449755] ? rcu_read_lock_sched_held+0x114/0x130 [95765.449755] ? __kmalloc_track_caller+0x211/0x2b0 [95765.449755] ? memcpy+0x34/0x50 [95765.449755] idletimer_tg_checkentry+0x4e2/0xb1b [xt_IDLETIMER] [ ... ] Fixes: 0902b469 ("netfilter: xtables: idletimer target implementation") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Jozsef Kadlecsik authored
BugLink: https://bugs.launchpad.net/bugs/1810958 [ Upstream commit 17b8b74c ] The function is called when rcu_read_lock() is held and not when rcu_read_lock_bh() is held. Signed-off-by:
Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by:
-
Justin M. Forbes authored
BugLink: https://bugs.launchpad.net/bugs/1810958 [ Upstream commit a541f0eb ] Fixes: ERROR: "__node_distance" [drivers/nvme/host/nvme-core.ko] undefined! make[1]: *** [scripts/Makefile.modpost:92: __modpost] Error 1 make: *** [Makefile:1275: modules] Error 2 + exit 1 Signed-off-by:
Justin M. Forbes <jforbes@fedoraproject.org> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Eric Westbrook authored
BugLink: https://bugs.launchpad.net/bugs/1810958 [ Upstream commit 886503f3 ] Allow /0 as advertised for hash:net,port,net sets. For "hash:net,port,net", ipset(8) says that "either subnet is permitted to be a /0 should you wish to match port between all destinations." Make that statement true. Before: # ipset create cidrzero hash:net,port,net # ipset add cidrzero 0.0.0.0/0,12345,0.0.0.0/0 ipset v6.34: The value of the CIDR parameter of the IP address is invalid # ipset create cidrzero6 hash:net,port,net family inet6 # ipset add cidrzero6 ::/0,12345,::/0 ipset v6.34: The value of the CIDR parameter of the IP address is invalid After: # ipset create cidrzero hash:net,port,net # ipset add cidrzero 0.0.0.0/0,12345,0.0.0.0/0 # ipset test cidrzero 192.168.205.129,12345,172.16.205.129 192.168.205.129,tcp:12345,172.16.205.129 is in set cidrzero. # ipset create cidrzero6 hash:net,port,net family inet6 # ipset add cidrzero6 ::/0,12345,::/0 # ipset test cidrzero6 fe80::1,12345,ff00::1 fe80::1,tcp:12345,ff00::1 is in set cidrzero6. See also: https://bugzilla.kernel.org/show_bug.cgi?id=200897 https://github.com/ewestbrook/linux/commit/df7ff6efb0934ab6acc11f003ff1a7580d6c1d9cSigned-off-by:
Eric Westbrook <linux@westbrook.io> Signed-off-by:
-
Vasily Gorbik authored
BugLink: https://bugs.launchpad.net/bugs/1810958 [ Upstream commit b44b136a ] According to Documentation/kbuild/makefiles.txt all build targets using if_changed should use FORCE as well. Add missing FORCE to make sure vdso targets are rebuild properly when not just immediate prerequisites have changed but also when build command differs. Reviewed-by:
Philipp Rudo <prudo@linux.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
-
Nathan Chancellor authored
BugLink: https://bugs.launchpad.net/bugs/1810958 [ Upstream commit b5bb4258 ] Clang warns that if the default case is taken, ret will be uninitialized. ./arch/arm64/include/asm/percpu.h:196:2: warning: variable 'ret' is used uninitialized whenever switch default is taken [-Wsometimes-uninitialized] default: ^~~~~~~ ./arch/arm64/include/asm/percpu.h:200:9: note: uninitialized use occurs here return ret; ^~~ ./arch/arm64/include/asm/percpu.h:157:19: note: initialize the variable 'ret' to silence this warning unsigned long ret, loop; ^ = 0 This warning appears several times while building the erofs filesystem. While it's not strictly wrong, the BUILD_BUG will prevent this from becoming a true problem. Initialize ret to 0 in the default case right before the BUILD_BUG to silence all of these warnings. Reported-by:
Prasad Sodagudi <psodagud@codeaurora.org> Signed-off-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Dennis Zhou <dennis@kernel.org> Signed-off-by:
-
Paul Gortmaker authored
BugLink: https://bugs.launchpad.net/bugs/1810958 [ Upstream commit 684238d7 ] To fix: acerhdf: unknown (unsupported) BIOS version Gateway /LT31 /v1.3307 , please report, aborting! As can be seen in the context, the BIOS registers haven't changed in the previous versions, so the assumption is they won't have changed in this last update for this somewhat older platform either. Cc: Peter Feuerer <peter@piie.net> Cc: Darren Hart <dvhart@infradead.org> Cc: Andy Shevchenko <andy@infradead.org> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
Peter Feuerer <peter@piie.net> Signed-off-by:
-
Marek Szyprowski authored
BugLink: https://bugs.launchpad.net/bugs/1810958 [ Upstream commit b3322802 ] Ensure that clocks for core SoC modules (including TZPC0..9 modules) are enabled for suspend/resume cycle. This fixes suspend/resume support on Exynos5422-based Odroid XU3/XU4 boards. Suggested-by:
Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Sylwester Nawrocki <snawrocki@kernel.org> Signed-off-by:
-
Chengguang Xu authored
BugLink: https://bugs.launchpad.net/bugs/1810958 [ Upstream commit 515f1867 ] There are some cases can cause memory leak when parsing option 'osdname'. Signed-off-by:
Chengguang Xu <cgxu519@gmx.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Richard Weinberger authored
BugLink: https://bugs.launchpad.net/bugs/1810958 [ Upstream commit 7ff1e34b ] Fixes: arch/um/os-Linux/skas/process.c:613:1: warning: control reaches end of non-void function [-Wreturn-type] longjmp() never returns but gcc still warns that the end of the function can be reached. Add a return code and debug aid to detect this impossible case. Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Ernesto A. Fernández authored
BugLink: https://bugs.launchpad.net/bugs/1810958 [ Upstream commit 0a3021d4 ] Creating, renaming or deleting a file may cause catalog corruption and data loss. This bug is randomly triggered by xfstests generic/027, but here is a faster reproducer: truncate -s 50M fs.iso mkfs.hfsplus fs.iso mount fs.iso /mnt i=100 while [ $i -le 150 ]; do touch /mnt/$i &>/dev/null ((++i)) done i=100 while [ $i -le 150 ]; do mv /mnt/$i /mnt/$(perl -e "print $i x82") &>/dev/null ((++i)) done umount /mnt fsck.hfsplus -n fs.iso The bug is triggered whenever hfs_brec_update_parent() needs to split the root node. The height of the btree is not increased, which leaves the new node orphaned and its records lost. Link: http://lkml.kernel.org/r/26d882184fc43043a810114258f45277752186c7.1535682461.git.ernesto.mnd.fernandez@gmail.comSigned-off-by:
Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Ernesto A. Fernández authored
BugLink: https://bugs.launchpad.net/bugs/1810958 [ Upstream commit d057c036 ] This bug is triggered whenever hfs_brec_update_parent() needs to split the root node. The height of the btree is not increased, which leaves the new node orphaned and its records lost. It is not possible for this to happen on a valid hfs filesystem because the index nodes have fixed length keys. For reasons I ignore, the hfs module does have support for a number of hfsplus features. A corrupt btree header may report variable length keys and trigger this bug, so it's better to fix it. Link: http://lkml.kernel.org/r/9750b1415685c4adca10766895f6d5ef12babdb0.1535682463.git.ernesto.mnd.fernandez@gmail.comSigned-off-by:
-
Jann Horn authored
BugLink: https://bugs.launchpad.net/bugs/1810958 [ Upstream commit b10298d5 ] fill_with_dentries() failed to propagate errors up to reiserfs_for_each_xattr() properly. Plumb them through. Note that reiserfs_for_each_xattr() is only used by reiserfs_delete_xattrs() and reiserfs_chown_xattrs(). The result of reiserfs_delete_xattrs() is discarded anyway, the only difference there is whether a warning is printed to dmesg. The result of reiserfs_chown_xattrs() does matter because it can block chowning of the file to which the xattrs belong; but either way, the resulting state can have misaligned ownership, so my patch doesn't improve things greatly. Credit for making me look at this code goes to Al Viro, who pointed out that the ->actor calling convention is suboptimal and should be changed. Link: http://lkml.kernel.org/r/20180802163335.83312-1-jannh@google.comSigned-off-by:
Jann Horn <jannh@google.com> Reviewed-by:
-
Matthias Kaehlcke authored
BugLink: https://bugs.launchpad.net/bugs/1810958 commit 9e8730b1 upstream. With the following commit: 8f918697 ("x86/build: Fix stack alignment for CLang") cc-option is only used to determine the name of the stack alignment option supported by the compiler, but not to verify that the actual parameter <option>=N is valid in combination with the other CFLAGS. This causes problems (as reported by the kbuild robot) with older GCC versions which only support stack alignment on a boundary of 16 bytes or higher. Also use (__)cc_option to add the stack alignment option to CFLAGS to make sure only valid options are added. Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Matthias Kaehlcke <mka@chromium.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Bernhard.Rosenkranzer@linaro.org Cc: Greg Hackmann <ghackmann@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Michael Davidson <md@google.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Hines <srhines@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dianders@chromium.org Fixes: 8f918697 ("x86/build: Fix stack alignment for CLang") Link: http://lkml.kernel.org/r/20170817182047.176752-1-mka@chromium.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Matthias Kaehlcke authored
BugLink: https://bugs.launchpad.net/bugs/1810958 commit 8f918697 upstream. Commit: d77698df ("x86/build: Specify stack alignment for clang") intended to use the same stack alignment for clang as with gcc. The two compilers use different options to configure the stack alignment (gcc: -mpreferred-stack-boundary=n, clang: -mstack-alignment=n). The above commit assumes that the clang option uses the same parameter type as gcc, i.e. that the alignment is specified as 2^n. However clang interprets the value of this option literally to use an alignment of n, in consequence the stack remains misaligned. Change the values used with -mstack-alignment to be the actual alignment instead of a power of two. cc-option isn't used here with the typical pattern of KBUILD_CFLAGS += $(call cc-option ...). The reason is that older gcc versions don't support the -mpreferred-stack-boundary option, since cc-option doesn't verify whether the alternative option is valid it would incorrectly select the clang option -mstack-alignment.. Signed-off-by:
-
Michael Davidson authored
BugLink: https://bugs.launchpad.net/bugs/1810958 commit 18d5e6c3 upstream. undef memcpy() and friends in boot/string.c so that the functions defined here will have the correct names, otherwise we end up up trying to redefine __builtin_memcpy() etc. Surprisingly, GCC allows this (and, helpfully, discards the __builtin_ prefix from the function name when compiling it), but clang does not. Adding these #undef's appears to preserve what I assume was the original intent of the code. Signed-off-by:
Michael Davidson <md@google.com> Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Bernhard.Rosenkranzer@linaro.org Cc: Greg Hackmann <ghackmann@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170724235155.79255-1-mka@chromium.orgSigned-off-by:
-
Matthias Kaehlcke authored
BugLink: https://bugs.launchpad.net/bugs/1810958 commit d77698df upstream. For gcc stack alignment is configured with -mpreferred-stack-boundary=N, clang has the option -mstack-alignment=N for that purpose. Use the same alignment as with gcc. If the alignment is not specified clang assumes an alignment of 16 bytes, as required by the standard ABI. However as mentioned in d9b0cde9 ("x86-64, gcc: Use -mpreferred-stack-boundary=3 if supported") the standard kernel entry on x86-64 leaves the stack on an 8-byte boundary, as a consequence clang will keep the stack misaligned. Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Matthias Kaehlcke authored
BugLink: https://bugs.launchpad.net/bugs/1810958 commit 032a2c4f upstream. cc-option is used to enable compiler options for the boot code if they are available. The macro uses KBUILD_CFLAGS and KBUILD_CPPFLAGS for the check, however these flags aren't used to build the boot code, in consequence cc-option can yield wrong results. For example -mpreferred-stack-boundary=2 is never set with a 64-bit compiler, since the setting is only valid for 16 and 32-bit binaries. This is also the case for 32-bit kernel builds, because the option -m32 is added to KBUILD_CFLAGS after the assignment of REALMODE_CFLAGS. Use __cc-option instead of cc-option for the boot mode options. The macro receives the compiler options as parameter instead of using KBUILD_C*FLAGS, for the boot code we pass REALMODE_CFLAGS. Also use separate statements for the __cc-option checks instead of performing them in the initial assignment of REALMODE_CFLAGS since the variable is an input of the macro. Signed-off-by:
-
Matthias Kaehlcke authored
BugLink: https://bugs.launchpad.net/bugs/1810958 commit 9f3f1fd2 upstream. cc-option uses KBUILD_CFLAGS and KBUILD_CPPFLAGS when it determines whether an option is supported or not. This is fine for options used to build the kernel itself, however some components like the x86 boot code use a different set of flags. Add the new macro __cc-option which is a more generic version of cc-option with additional parameters. One parameter is the compiler with which the check should be performed, the other the compiler options to be used instead KBUILD_C*FLAGS. Refactor cc-option and hostcc-option to use __cc-option and move hostcc-option to scripts/Kbuild.include. Suggested-by:
Arnd Bergmann <arnd@arndb.de> Suggested-by:
Michal Marek <mmarek@suse.com> Signed-off-by:
-
Matthias Kaehlcke authored
BugLink: https://bugs.launchpad.net/bugs/1810958 commit 121843eb upstream. The constraint "rm" allows the compiler to put mix_const into memory. When the input operand is a memory location then MUL needs an operand size suffix, since Clang can't infer the multiplication width from the operand. Add and use the _ASM_MUL macro which determines the operand size and resolves to the NUL instruction with the corresponding suffix. This fixes the following error when building with clang: CC arch/x86/lib/kaslr.o /tmp/kaslr-dfe1ad.s: Assembler messages: /tmp/kaslr-dfe1ad.s:182: Error: no instruction mnemonic suffix given and no register operands; can't size instruction Signed-off-by:
-
Michael Davidson authored
BugLink: https://bugs.launchpad.net/bugs/1810958 commit fdb2726f upstream. aes_ctrby8_avx-x86_64.S uses the C preprocessor for token pasting of character sequences that are not valid preprocessor tokens. While this is allowed when preprocessing assembler files it exposes an incompatibilty between the clang and gcc preprocessors where clang does not strip leading white space from macro parameters, leading to the CONCAT(%xmm, i) macro expansion on line 96 resulting in a token with a space character embedded in it. While this could be resolved by deleting the offending space character, the assembler is perfectly capable of doing the token pasting correctly for itself so we can just get rid of the preprocessor macros. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Matthias Kaehlcke authored
BugLink: https://bugs.launchpad.net/bugs/1810958 commit 2c4fd1ac upstream. clang currently does not support these optimizations, only enable them when they are available. Signed-off-by:
-
Matthias Kaehlcke authored
BugLink: https://bugs.launchpad.net/bugs/1810958 clang raises 'asm-operand-widths' warnings in inline assembly code when the size of an operand is < 64 bits and the operand width is unspecified. Most warnings are raised in macros, i.e. the datatype of the operand may vary. Signed-off-by:
-
Stefan Agner authored
BugLink: https://bugs.launchpad.net/bugs/1810958 commit ef8c4ed9 upstream. When using a GCC cross toolchain which is not in a compiled in Clang search path, Clang reverts to the system assembler and linker. This leads to assembler or linker errors, depending on which tool is first used for a given architecture. It seems that Clang is not searching $PATH for a matching assembler or linker. Make sure that Clang picks up the correct assembler or linker by passing the cross compilers bin directory as search path. This allows to use Clang provided by distributions with GCC toolchains not in /usr/bin. Link: https://github.com/ClangBuiltLinux/linux/issues/78Signed-off-by:
Stefan Agner <stefan@agner.ch> Reviewed-and-tested-by:
-
Stefan Agner authored
BugLink: https://bugs.launchpad.net/bugs/1810958 commit 0f0e8de3 upstream. In order to make sure compiler flag detection for ARM works correctly the no-integrated-as flags need to be set before including the arch specific Makefile. Fixes: cfe17c9b ("kbuild: move cc-option and cc-disable-warning after incl. arch Makefile") Signed-off-by:
-
Sodagudi Prasad authored
BugLink: https://bugs.launchpad.net/bugs/1810958 commit 0a5f4176 upstream. Currently, GCC disables -Wunused-const-variable, but not -Wunused-variable, so warns unused variables if they are non-constant. While, Clang does not warn unused variables at all regardless of the const qualifier because -Wno-unused-const-variable is implied by the stronger option -Wno-unused-variable. Disable -Wunused-const-variable instead of -Wunused-variable so that GCC and Clang work in the same way. Signed-off-by:
-
