Active uprobes are stored in an RB tree and accesses to this tree are
dominated by read operations. Currently these accesses are serialized by
a spinlock but this leads to enormous contention when large numbers of
threads are executing active probes.

This patch converts the spinlock used to serialize access to the
uprobes_tree RB tree into a reader-writer spinlock. This lock type
aligns naturally with the overwhelmingly read-only nature of the tree
usage here. Although the addition of reader-writer spinlocks are
discouraged [0], this fix is proposed as an interim solution while an
RCU based approach is implemented (that work is in a nascent form). This
fix also has the benefit of being trivial, self contained and therefore
simple to backport.

We have used a uprobe benchmark from the BPF selftests [1] to estimate
the improvements. Each block of results below show 1 line per execution
of the benchmark ("the "Summary" line) and each line is a run with one
more thread added - a thread is a "producer". The lines are edited to
remove extraneous output.

The tests were executed with this driver script:

for num_threads in {1..20}
do
  sudo ./bench -a -p $num_threads trig-uprobe-nop | grep Summary
done

SPINLOCK (BEFORE)
==================
Summary: hits    1.396 ± 0.007M/s (  1.396M/prod)
Summary: hits    1.656 ± 0.016M/s (  0.828M/prod)
Summary: hits    2.246 ± 0.008M/s (  0.749M/prod)
Summary: hits    2.114 ± 0.010M/s (  0.529M/prod)
Summary: hits    2.013 ± 0.009M/s (  0.403M/prod)
Summary: hits    1.753 ± 0.008M/s (  0.292M/prod)
Summary: hits    1.847 ± 0.001M/s (  0.264M/prod)
Summary: hits    1.889 ± 0.001M/s (  0.236M/prod)
Summary: hits    1.833 ± 0.006M/s (  0.204M/prod)
Summary: hits    1.900 ± 0.003M/s (  0.190M/prod)
Summary: hits    1.918 ± 0.006M/s (  0.174M/prod)
Summary: hits    1.925 ± 0.002M/s (  0.160M/prod)
Summary: hits    1.837 ± 0.001M/s (  0.141M/prod)
Summary: hits    1.898 ± 0.001M/s (  0.136M/prod)
Summary: hits    1.799 ± 0.016M/s (  0.120M/prod)
Summary: hits    1.850 ± 0.005M/s (  0.109M/prod)
Summary: hits    1.816 ± 0.002M/s (  0.101M/prod)
Summary: hits    1.787 ± 0.001M/s (  0.094M/prod)
Summary: hits    1.764 ± 0.002M/s (  0.088M/prod)

RW SPINLOCK (AFTER)
===================
Summary: hits    1.444 ± 0.020M/s (  1.444M/prod)
Summary: hits    2.279 ± 0.011M/s (  1.139M/prod)
Summary: hits    3.422 ± 0.014M/s (  1.141M/prod)
Summary: hits    3.565 ± 0.017M/s (  0.891M/prod)
Summary: hits    2.671 ± 0.013M/s (  0.534M/prod)
Summary: hits    2.409 ± 0.005M/s (  0.401M/prod)
Summary: hits    2.485 ± 0.008M/s (  0.355M/prod)
Summary: hits    2.496 ± 0.003M/s (  0.312M/prod)
Summary: hits    2.585 ± 0.002M/s (  0.287M/prod)
Summary: hits    2.908 ± 0.011M/s (  0.291M/prod)
Summary: hits    2.346 ± 0.016M/s (  0.213M/prod)
Summary: hits    2.804 ± 0.004M/s (  0.234M/prod)
Summary: hits    2.556 ± 0.001M/s (  0.197M/prod)
Summary: hits    2.754 ± 0.004M/s (  0.197M/prod)
Summary: hits    2.482 ± 0.002M/s (  0.165M/prod)
Summary: hits    2.412 ± 0.005M/s (  0.151M/prod)
Summary: hits    2.710 ± 0.003M/s (  0.159M/prod)
Summary: hits    2.826 ± 0.005M/s (  0.157M/prod)
Summary: hits    2.718 ± 0.001M/s (  0.143M/prod)
Summary: hits    2.844 ± 0.006M/s (  0.142M/prod)

The numbers in parenthesis give averaged throughput per thread which is
of greatest interest here as a measure of scalability. Improvements are
in the order of 22 - 68% with this particular benchmark (mean = 43%).

V2:
 - Updated commit message to include benchmark results.

[0] https://docs.kernel.org/locking/spinlocks.html
[1] https://github.com/torvalds/linux/blob/master/tools/testing/selftests/bpf/benchs/bench_trigger.c

Link: https://lore.kernel.org/all/20240422102306.6026-1-jonathan.haslam@gmail.com/Signed-off-by: Jonathan Haslam <jonathan.haslam@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

The function rethook_find_ret_addr() prints a warning message and returns 0
when the target task is running and is not the "current" task in order to
prevent the incorrect return address, although it still may return an
incorrect address.

However, the warning message turns into noise when BPF profiling programs
call bpf_get_task_stack() on running tasks in a firm with a large number of
hosts.

The callers should be aware and willing to take the risk of receiving an
incorrect return address from a task that is currently running other than
the "current" one. A warning is not needed here as the callers are intent
on it.

Link: https://lore.kernel.org/all/20240408175140.60223-1-thinker.li@gmail.com/Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

We are going to store callbacks in following change,
so this will ease up the code.

Link: https://lore.kernel.org/all/20240207153550.856536-2-jolsa@kernel.org/Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

This patch adds fprobe test cases for new print format type "%pd/%pD".The
test cases test the following items:
1. Test "%pd" type for dput();
2. Test "%pD" type for vfs_read();

This test case require enable CONFIG_HAVE_FUNCTION_ARG_ACCESS_API configuration.

Link: https://lore.kernel.org/all/20240322064308.284457-6-yebin10@huawei.com/Signed-off-by: Ye Bin <yebin10@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

This patch adds test cases for new print format type "%pd/%pD".The test cases
test the following items:
1. Test README if add "%pd/%pD" type;
2. Test "%pd" type for dput();
3. Test "%pD" type for vfs_read();

This test case require enable CONFIG_HAVE_FUNCTION_ARG_ACCESS_API configuration.

Link: https://lore.kernel.org/all/20240322064308.284457-5-yebin10@huawei.com/Signed-off-by: Ye Bin <yebin10@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

Similar to printk() '%pd' is for fetch dentry's name from struct dentry's
pointer, and '%pD' is for fetch file's name from struct file's pointer.

Link: https://lore.kernel.org/all/20240322064308.284457-4-yebin10@huawei.com/Signed-off-by: Ye Bin <yebin10@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

As like '%pd' type, this patch supports print type '%pD' for print file's
name. For example "name=$arg1:%pD" casts the `$arg1` as (struct file*),
dereferences the "file.f_path.dentry.d_name.name" field and stores it to
"name" argument as a kernel string.
Here is an example:
[tracing]# echo 'p:testprobe vfs_read name=$arg1:%pD' > kprobe_event
[tracing]# echo 1 > events/kprobes/testprobe/enable
[tracing]# grep -q "1" events/kprobes/testprobe/enable
[tracing]# echo 0 > events/kprobes/testprobe/enable
[tracing]# grep "vfs_read" trace | grep "enable"
            grep-15108   [003] .....  5228.328609: testprobe: (vfs_read+0x4/0xbb0) name="enable"

Note that this expects the given argument (e.g. $arg1) is an address of struct
file. User must ensure it.

Link: https://lore.kernel.org/all/20240322064308.284457-3-yebin10@huawei.com/
[Masami: replaced "previous patch" with '%pd' type]
Signed-off-by: Ye Bin <yebin10@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

During fault locating, the file name needs to be printed based on the
dentry  address. The offset needs to be calculated each time, which
is troublesome. Similar to printk, kprobe support print type '%pd' for
print dentry's name. For example "name=$arg1:%pd" casts the `$arg1`
as (struct dentry *), dereferences the "d_name.name" field and stores
it to "name" argument as a kernel string.
Here is an example:
[tracing]# echo 'p:testprobe dput name=$arg1:%pd' > kprobe_events
[tracing]# echo 1 > events/kprobes/testprobe/enable
[tracing]# grep -q "1" events/kprobes/testprobe/enable
[tracing]# echo 0 > events/kprobes/testprobe/enable
[tracing]# cat trace | grep "enable"
	    bash-14844   [002] ..... 16912.889543: testprobe: (dput+0x4/0x30) name="enable"
            grep-15389   [003] ..... 16922.834182: testprobe: (dput+0x4/0x30) name="enable"
            grep-15389   [003] ..... 16922.836103: testprobe: (dput+0x4/0x30) name="enable"
            bash-14844   [001] ..... 16931.820909: testprobe: (dput+0x4/0x30) name="enable"

Note that this expects the given argument (e.g. $arg1) is an address of struct
dentry. User must ensure it.

Link: https://lore.kernel.org/all/20240322064308.284457-2-yebin10@huawei.com/Signed-off-by: Ye Bin <yebin10@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

It's very common with BPF-based uprobe/uretprobe use cases to have
a system-wide (not PID specific) probes used. In this case uprobe's
trace_uprobe_filter->nr_systemwide counter is bumped at registration
time, and actual filtering is short circuited at the time when
uprobe/uretprobe is triggered.

This is a great optimization, and the only issue with it is that to even
get to checking this counter uprobe subsystem is taking
read-side trace_uprobe_filter->rwlock. This is actually noticeable in
profiles and is just another point of contention when uprobe is
triggered on multiple CPUs simultaneously.

This patch moves this nr_systemwide check outside of filter list's
rwlock scope, as rwlock is meant to protect list modification, while
nr_systemwide-based check is speculative and racy already, despite the
lock (as discussed in [0]). trace_uprobe_filter_remove() and
trace_uprobe_filter_add() already check for filter->nr_systewide
explicitly outside of __uprobe_perf_filter, so no modifications are
required there.

Confirming with BPF selftests's based benchmarks.

BEFORE (based on changes in previous patch)
===========================================
uprobe-nop     :    2.732 ± 0.022M/s
uprobe-push    :    2.621 ± 0.016M/s
uprobe-ret     :    1.105 ± 0.007M/s
uretprobe-nop  :    1.396 ± 0.007M/s
uretprobe-push :    1.347 ± 0.008M/s
uretprobe-ret  :    0.800 ± 0.006M/s

AFTER
=====
uprobe-nop     :    2.878 ± 0.017M/s (+5.5%, total +8.3%)
uprobe-push    :    2.753 ± 0.013M/s (+5.3%, total +10.2%)
uprobe-ret     :    1.142 ± 0.010M/s (+3.8%, total +3.8%)
uretprobe-nop  :    1.444 ± 0.008M/s (+3.5%, total +6.5%)
uretprobe-push :    1.410 ± 0.010M/s (+4.8%, total +7.1%)
uretprobe-ret  :    0.816 ± 0.002M/s (+2.0%, total +3.9%)

In the above, first percentage value is based on top of previous patch
(lazy uprobe buffer optimization), while the "total" percentage is
based on kernel without any of the changes in this patch set.

As can be seen, we get about 4% - 10% speed up, in total, with both lazy
uprobe buffer and speculative filter check optimizations.

  [0] https://lore.kernel.org/bpf/20240313131926.GA19986@redhat.com/Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/all/20240318181728.2795838-4-andrii@kernel.org/Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

uprobe_cpu_buffer and corresponding logic to store uprobe args into it
are used for uprobes/uretprobes that are created through tracefs or
perf events.

BPF is yet another user of uprobe/uretprobe infrastructure, but doesn't
need uprobe_cpu_buffer and associated data. For BPF-only use cases this
buffer handling and preparation is a pure overhead. At the same time,
BPF-only uprobe/uretprobe usage is very common in practice. Also, for
a lot of cases applications are very senstivie to performance overheads,
as they might be tracing a very high frequency functions like
malloc()/free(), so every bit of performance improvement matters.

All that is to say that this uprobe_cpu_buffer preparation is an
unnecessary overhead that each BPF user of uprobes/uretprobe has to pay.
This patch is changing this by making uprobe_cpu_buffer preparation
optional. It will happen only if either tracefs-based or perf event-based
uprobe/uretprobe consumer is registered for given uprobe/uretprobe. For
BPF-only use cases this step will be skipped.

We used uprobe/uretprobe benchmark which is part of BPF selftests (see [0])
to estimate the improvements. We have 3 uprobe and 3 uretprobe
scenarios, which vary an instruction that is replaced by uprobe: nop
(fastest uprobe case), `push rbp` (typical case), and non-simulated
`ret` instruction (slowest case). Benchmark thread is constantly calling
user space function in a tight loop. User space function has attached
BPF uprobe or uretprobe program doing nothing but atomic counter
increments to count number of triggering calls. Benchmark emits
throughput in millions of executions per second.

BEFORE these changes
====================
uprobe-nop     :    2.657 ± 0.024M/s
uprobe-push    :    2.499 ± 0.018M/s
uprobe-ret     :    1.100 ± 0.006M/s
uretprobe-nop  :    1.356 ± 0.004M/s
uretprobe-push :    1.317 ± 0.019M/s
uretprobe-ret  :    0.785 ± 0.007M/s

AFTER these changes
===================
uprobe-nop     :    2.732 ± 0.022M/s (+2.8%)
uprobe-push    :    2.621 ± 0.016M/s (+4.9%)
uprobe-ret     :    1.105 ± 0.007M/s (+0.5%)
uretprobe-nop  :    1.396 ± 0.007M/s (+2.9%)
uretprobe-push :    1.347 ± 0.008M/s (+2.3%)
uretprobe-ret  :    0.800 ± 0.006M/s (+1.9)

So the improvements on this particular machine seems to be between 2% and 5%.

  [0] https://github.com/torvalds/linux/blob/master/tools/testing/selftests/bpf/benchs/bench_trigger.cReviewed-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/all/20240318181728.2795838-3-andrii@kernel.org/Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

Move the logic of fetching temporary per-CPU uprobe buffer and storing
uprobes args into it to a new helper function. Store data size as part
of this buffer, simplifying interfaces a bit, as now we only pass single
uprobe_cpu_buffer reference around, instead of pointer + dsize.

This logic was duplicated across uprobe_dispatcher and uretprobe_dispatcher,
and now will be centralized. All this is also in preparation to make
this uprobe_cpu_buffer handling logic optional in the next patch.

Link: https://lore.kernel.org/all/20240318181728.2795838-2-andrii@kernel.org/
[Masami: update for v6.9-rc3 kernel]
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

Pull scheduler fixes from Ingo Molnar:

 - Fix EEVDF corner cases

 - Fix two nohz_full= related bugs that can cause boot crashes
   and warnings

* tag 'sched-urgent-2024-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/isolation: Fix boot crash when maxcpus < first housekeeping CPU
  sched/isolation: Prevent boot crash when the boot CPU is nohz_full
  sched/eevdf: Prevent vlag from going out of bounds in reweight_eevdf()
  sched/eevdf: Fix miscalculation in reweight_entity() when se is not curr
  sched/eevdf: Always update V if se->on_rq when reweighting

Pull x86 fixes from Ingo Molnar:

 - Make the CPU_MITIGATIONS=n interaction with conflicting
   mitigation-enabling boot parameters a bit saner.

 - Re-enable CPU mitigations by default on non-x86

 - Fix TDX shared bit propagation on mprotect()

 - Fix potential show_regs() system hang when PKE initialization
   is not fully finished yet.

 - Add the 0x10-0x1f model IDs to the Zen5 range

 - Harden #VC instruction emulation some more

* tag 'x86-urgent-2024-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  cpu: Ignore "mitigations" kernel parameter if CPU_MITIGATIONS=n
  cpu: Re-enable CPU mitigations by default for !X86 architectures
  x86/tdx: Preserve shared bit on mprotect()
  x86/cpu: Fix check for RDPKRU in __show_regs()
  x86/CPU/AMD: Add models 0x10-0x1f to the Zen5 range
  x86/sev: Check for MWAITX and MONITORX opcodes in the #VC handler

Pull irq fix from Ingo Molnar:
 "Fix a double free bug in the init error path of the GICv3 irqchip
  driver"

* tag 'irq-urgent-2024-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic-v3-its: Prevent double free on error

housekeeping_setup() checks cpumask_intersects(present, online) to ensure
that the kernel will have at least one housekeeping CPU after smp_init(),
but this doesn't work if the maxcpus= kernel parameter limits the number of
processors available after bootup.

For example, a kernel with "maxcpus=2 nohz_full=0-2" parameters crashes at
boot time on a virtual machine with 4 CPUs.

Change housekeeping_setup() to use cpumask_first_and() and check that the
returned CPU number is valid and less than setup_max_cpus.

Another corner case is "nohz_full=0" on a machine with a single CPU or with
the maxcpus=1 kernel argument. In this case non_housekeeping_mask is empty
and tick_nohz_full_setup() makes no sense. And indeed, the kernel hits the
WARN_ON(tick_nohz_full_running) in tick_sched_do_timer().

And how should the kernel interpret the "nohz_full=" parameter? It should
be silently ignored, but currently cpulist_parse() happily returns the
empty cpumask and this leads to the same problem.

Change housekeeping_setup() to check cpumask_empty(non_housekeeping_mask)
and do nothing in this case.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Phil Auld <pauld@redhat.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240413141746.GA10008@redhat.com

Documentation/timers/no_hz.rst states that the "nohz_full=" mask must not
include the boot CPU, which is no longer true after:

  08ae95f4 ("nohz_full: Allow the boot CPU to be nohz_full").

However after:

  aae17ebb ("workqueue: Avoid using isolated cpus' timers on queue_delayed_work")

the kernel will crash at boot time in this case; housekeeping_any_cpu()
returns an invalid CPU number until smp_init() brings the first
housekeeping CPU up.

Change housekeeping_any_cpu() to check the result of cpumask_any_and() and
return smp_processor_id() in this case.

This is just the simple and backportable workaround which fixes the
symptom, but smp_processor_id() at boot time should be safe at least for
type == HK_TYPE_TIMER, this more or less matches the tick_do_timer_boot_cpu
logic.

There is no worry about cpu_down(); tick_nohz_cpu_down() will not allow to
offline tick_do_timer_cpu (the 1st online housekeeping CPU).

Fixes: aae17ebb ("workqueue: Avoid using isolated cpus' timers on queue_delayed_work")
Reported-by: Chris von Recklinghausen <crecklin@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Phil Auld <pauld@redhat.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240411143905.GA19288@redhat.com
Closes: https://lore.kernel.org/all/20240402105847.GA24832@redhat.com/

Pull Rust fixes from Miguel Ojeda:

 - Soundness: make internal functions generated by the 'module!' macro
   inaccessible, do not implement 'Zeroable' for 'Infallible' and
   require 'Send' for the 'Module' trait.

 - Build: avoid errors with "empty" files and workaround 'rustdoc' ICE.

 - Kconfig: depend on '!CFI_CLANG' and avoid selecting 'CONSTRUCTORS'.

 - Code docs: remove non-existing key from 'module!' macro example.

 - Docs: trivial rendering fix in arch table.

* tag 'rust-fixes-6.9' of https://github.com/Rust-for-Linux/linux:
  rust: remove `params` from `module` macro example
  kbuild: rust: force `alloc` extern to allow "empty" Rust files
  kbuild: rust: remove unneeded `@rustc_cfg` to avoid ICE
  rust: kernel: require `Send` for `Module` implementations
  rust: phy: implement `Send` for `Registration`
  rust: make mutually exclusive with CFI_CLANG
  rust: macros: fix soundness issue in `module!` macro
  rust: init: remove impl Zeroable for Infallible
  docs: rust: fix improper rendering in Arch Support page
  rust: don't select CONSTRUCTORS

Pull RISC-V fixes from Palmer Dabbelt:

 - A fix for TASK_SIZE on rv64/NOMMU, to reflect the lack of user/kernel
   separation

 - A fix to avoid loading rv64/NOMMU kernel past the start of RAM

 - A fix for RISCV_HWPROBE_EXT_ZVFHMIN on ilp32 to avoid signed integer
   overflow in the bitmask

 - The sud_test kselftest has been fixed to properly swizzle the syscall
   number into the return register, which are not the same on RISC-V

 - A fix for a build warning in the perf tools on rv32

 - A fix for the CBO selftests, to avoid non-constants leaking into the
   inline asm

 - A pair of fixes for T-Head PBMT errata probing, which has been
   renamed MAE by the vendor

* tag 'riscv-for-linus-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  RISC-V: selftests: cbo: Ensure asm operands match constraints, take 2
  perf riscv: Fix the warning due to the incompatible type
  riscv: T-Head: Test availability bit before enabling MAE errata
  riscv: thead: Rename T-Head PBMT to MAE
  selftests: sud_test: return correct emulated syscall value on RISC-V
  riscv: hwprobe: fix invalid sign extension for RISCV_HWPROBE_EXT_ZVFHMIN
  riscv: Fix loading 64-bit NOMMU kernels past the start of RAM
  riscv: Fix TASK_SIZE on 64-bit NOMMU

Pull smb client fixes from Steve French:
 "Three smb3 client fixes, all also for stable:

   - two small locking fixes spotted by Coverity

   - FILE_ALL_INFO and network_open_info packing fix"

* tag '6.9-rc5-cifs-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  smb3: fix lock ordering potential deadlock in cifs_sync_mid_result
  smb3: missing lock when picking channel
  smb: client: Fix struct_group() usage in __packed structs

Pull i2c fixes from Wolfram Sang:
 "Fix a race condition in the at24 eeprom handler, a NULL pointer
  exception in the I2C core for controllers only using target modes,
  drop a MAINTAINERS entry, and fix an incorrect DT binding for at24"

* tag 'i2c-for-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: smbus: fix NULL function pointer dereference
  MAINTAINERS: Drop entry for PCA9541 bus master selector
  eeprom: at24: fix memory corruption race condition
  dt-bindings: eeprom: at24: Fix ST M24C64-D compatible schema

create_prof_cpu_mask() is no longer used after commit 1f44a225 ("s390:
convert interrupt handling to use generic hardirq").
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull soundwire fix from Vinod Koul:

 - Single AMD driver fix for wake interrupt handling in clockstop mode

* tag 'soundwire-6.9-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
  soundwire: amd: fix for wake interrupt handling for clockstop mode

Pull dmaengine fixes from Vinod Koul:

 - Revert pl330 issue_pending waits until WFP state due to regression
   reported in Bluetooth loading

 - Xilinx driver fixes for synchronization, buffer offsets, locking and
   kdoc

 - idxd fixes for spinlock and preventing the migration of the perf
   context to an invalid target

 - idma driver fix for interrupt handling when powered off

 - Tegra driver residual calculation fix

 - Owl driver register access fix

* tag 'dmaengine-fix-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
  dmaengine: idxd: Fix oops during rmmod on single-CPU platforms
  dmaengine: xilinx: xdma: Clarify kdoc in XDMA driver
  dmaengine: xilinx: xdma: Fix synchronization issue
  dmaengine: xilinx: xdma: Fix wrong offsets in the buffers addresses in dma descriptor
  dma: xilinx_dpdma: Fix locking
  dmaengine: idxd: Convert spinlock to mutex to lock evl workqueue
  idma64: Don't try to serve interrupts when device is powered off
  dmaengine: tegra186: Fix residual calculation
  dmaengine: owl: fix register access functions
  dmaengine: Revert "dmaengine: pl330: issue_pending waits until WFP state"

Pull phy fixes from Vinod Koul:

 - static checker (array size, bounds) fix for marvel driver

 - Rockchip rk3588 pcie fixes for bifurcation and mux

 - Qualcomm qmp-compbo fix for VCO, register base and regulator name for
   m31 driver

 - charger det crash fix for ti driver

* tag 'phy-fixes-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
  phy: ti: tusb1210: Resolve charger-det crash if charger psy is unregistered
  phy: qcom: qmp-combo: fix VCO div offset on v5_5nm and v6
  phy: phy-rockchip-samsung-hdptx: Select CONFIG_RATIONAL
  phy: qcom: m31: match requested regulator name with dt schema
  phy: qcom: qmp-combo: Fix register base for QSERDES_DP_PHY_MODE
  phy: qcom: qmp-combo: Fix VCO div offset on v3
  phy: rockchip: naneng-combphy: Fix mux on rk3588
  phy: rockchip-snps-pcie3: fix clearing PHP_GRF_PCIESEL_CON bits
  phy: rockchip-snps-pcie3: fix bifurcation on rk3588
  phy: freescale: imx8m-pcie: fix pcie link-up instability
  phy: marvell: a3700-comphy: Fix hardcoded array size
  phy: marvell: a3700-comphy: Fix out of bounds read

Baruch reported an OOPS when using the designware controller as target
only. Target-only modes break the assumption of one transfer function
always being available. Fix this by always checking the pointer in
__i2c_transfer.
Reported-by: Baruch Siach <baruch@tkos.co.il>
Closes: https://lore.kernel.org/r/4269631780e5ba789cf1ae391eec1b959def7d99.1712761976.git.baruch@tkos.co.il
Fixes: 4b1acc43 ("i2c: core changes for slave support")
[wsa: dropped the simplification in core-smbus to avoid theoretical regressions]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Baruch Siach <baruch@tkos.co.il>

Pull ARM SoC fixes from Arnd Bergmann:
 "There are a lot of minor DT fixes for Mediatek, Rockchip, Qualcomm and
  Microchip and NXP, addressing both build-time warnings and bugs found
  during runtime testing.

  Most of these changes are machine specific fixups, but there are a few
  notable regressions that affect an entire SoC:

   - The Qualcomm MSI support that was improved for 6.9 ended up being
     wrong on some chips and now gets fixed.

   - The i.MX8MP camera interface broke due to a typo and gets updated
     again.

  The main driver fix is also for Qualcomm platforms, rewriting an
  interface in the QSEECOM firmware support that could lead to crashing
  the kernel from a trusted application.

  The only other code changes are minor fixes for Mediatek SoC drivers"

* tag 'soc-fixes-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (50 commits)
  ARM: dts: imx6ull-tarragon: fix USB over-current polarity
  soc: mediatek: mtk-socinfo: depends on CONFIG_SOC_BUS
  soc: mediatek: mtk-svs: Append "-thermal" to thermal zone names
  arm64: dts: imx8mp: Fix assigned-clocks for second CSI2
  ARM: dts: microchip: at91-sama7g54_curiosity: Replace regulator-suspend-voltage with the valid property
  ARM: dts: microchip: at91-sama7g5ek: Replace regulator-suspend-voltage with the valid property
  arm64: dts: rockchip: Fix USB interface compatible string on kobol-helios64
  arm64: dts: qcom: sc8180x: Fix ss_phy_irq for secondary USB controller
  arm64: dts: qcom: sm8650: Fix the msi-map entries
  arm64: dts: qcom: sm8550: Fix the msi-map entries
  arm64: dts: qcom: sm8450: Fix the msi-map entries
  arm64: dts: qcom: sc8280xp: add missing PCIe minimum OPP
  arm64: dts: qcom: x1e80100: Fix the compatible for cluster idle states
  arm64: dts: qcom: Fix type of "wdog" IRQs for remoteprocs
  arm64: dts: rockchip: regulator for sd needs to be always on for BPI-R2Pro
  dt-bindings: rockchip: grf: Add missing type to 'pcie-phy' node
  arm64: dts: rockchip: drop redundant disable-gpios in Lubancat 2
  arm64: dts: rockchip: drop redundant disable-gpios in Lubancat 1
  arm64: dts: rockchip: drop redundant pcie-reset-suspend in Scarlet Dumo
  arm64: dts: rockchip: mark system power controller and fix typo on orangepi-5-plus
  ...

Merge tag 'mm-hotfixes-stable-2024-04-26-13-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
 "11 hotfixes. 8 are cc:stable and the remaining 3 (nice ratio!) address
  post-6.8 issues or aren't considered suitable for backporting.

  All except one of these are for MM. I see no particular theme - it's
  singletons all over"

* tag 'mm-hotfixes-stable-2024-04-26-13-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  mm/hugetlb: fix DEBUG_LOCKS_WARN_ON(1) when dissolve_free_hugetlb_folio()
  selftests: mm: protection_keys: save/restore nr_hugepages value from launch script
  stackdepot: respect __GFP_NOLOCKDEP allocation flag
  hugetlb: check for anon_vma prior to folio allocation
  mm: zswap: fix shrinker NULL crash with cgroup_disable=memory
  mm: turn folio_test_hugetlb into a PageType
  mm: support page_mapcount() on page_has_type() pages
  mm: create FOLIO_FLAG_FALSE and FOLIO_TYPE_OPS macros
  mm/hugetlb: fix missing hugetlb_lock for resv uncharge
  selftests: mm: fix unused and uninitialized variable warning
  selftests/harness: remove use of LINE_MAX

Pull MMC host fixes from Ulf Hansson:

 - moxart: Fix regression for sg_miter for PIO mode

 - sdhci-msm: Avoid hang by preventing access to suspended controller

 - sdhci-of-dwcmshc: Fix SD card tuning error for th1520

* tag 'mmc-v6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: moxart: fix handling of sgm->consumed, otherwise WARN_ON triggers
  mmc: sdhci-of-dwcmshc: th1520: Increase tuning loop count to 128
  mmc: sdhci-msm: pervent access to suspended controller

Pull ARC fixes from Vineet Gupta:

 - Incorrect VIPT aliasing assumption

 - Misc build warning fixes and some typos

* tag 'arc-6.9-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: [plat-hsdk]: Remove misplaced interrupt-cells property
  ARC: Fix typos
  ARC: mm: fix new code about cache aliasing
  ARC: Fix -Wmissing-prototypes warnings

Pull MTD fixes from Miquel Raynal:
 "There has been OTP support improvements in the NVMEM subsystem, and
  later also improvements of OTP support in the NAND subsystem. This
  lead to situations that we currently cannot handle, so better prevent
  this situation from happening in order to avoid canceling device's
  probe.

  In the raw NAND subsystem, two runtime fixes have been shared, one
  fixing two important commands in the Qcom driver since it got reworked
  and a NULL pointer dereference happening on STB chips.

  Arnd also fixed a UBSAN link failure on diskonchip"

* tag 'mtd/fixes-for-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: limit OTP NVMEM cell parse to non-NAND devices
  mtd: diskonchip: work around ubsan link failure
  mtd: rawnand: qcom: Fix broken OP_RESET_DEVICE command in qcom_misc_cmd_type_exec()
  mtd: rawnand: brcmnand: Fix data access violation for STB chip

Pull gpio fixes from Bartosz Golaszewski:

 - fix a regression in pin access control in gpio-tegra186

 - make data pointer dereference robust in Intel Tangier driver

* tag 'gpio-fixes-for-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: tegra186: Fix tegra186_gpio_is_accessible() check
  gpio: tangier: Use correct type for the IRQ chip data

Pull cxl fix from Dave Jiang:

 - Fix potential payload size confusion in cxl_mem_get_poison()

* tag 'cxl-fixes-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
  cxl/core: Fix potential payload size confusion in cxl_mem_get_poison()

Merge tag 'for-6.9/dm-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - Fix 6.9 regression so that DM device removal is performed
   synchronously by default.

   Asynchronous removal has always been possible but it isn't the
   default. It is important that synchronous removal be preserved,
   otherwise it is an interface change that breaks lvm2.

 - Remove errant semicolon in drivers/md/dm-vdo/murmurhash3.c

* tag 'for-6.9/dm-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm: restore synchronous close of device mapper block device
  dm vdo murmurhash: remove unneeded semicolon

Pull vfs fixes from Christian Brauner:
 "This contains a few small fixes for this merge window and the attempt
  to handle the ntfs removal regression that was reported a little while
  ago:

   - After the removal of the legacy ntfs driver we received reports
     about regressions for some people that do mount "ntfs" explicitly
     and expect the driver to be available. Since ntfs3 is a drop-in for
     legacy ntfs we alias legacy ntfs to ntfs3 just like ext3 is aliased
     to ext4.

     We also enforce legacy ntfs is always mounted read-only and give it
     custom file operations to ensure that ioctl()'s can't be abused to
     perform write operations.

   - Fix an unbalanced module_get() in bdev_open().

   - Two smaller fixes for the netfs work done earlier in this cycle.

   - Fix the errno returned from the new FS_IOC_GETUUID and
     FS_IOC_GETFSSYSFSPATH ioctls. Both commands just pull information
     out of the superblock so there's no need to call into the actual
     ioctl handlers.

     So instead of returning ENOIOCTLCMD to indicate to fallback we just
     return ENOTTY directly avoiding that indirection"

* tag 'vfs-6.9-rc6.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  netfs: Fix the pre-flush when appending to a file in writethrough mode
  netfs: Fix writethrough-mode error handling
  ntfs3: add legacy ntfs file operations
  ntfs3: enforce read-only when used as legacy ntfs driver
  ntfs3: serve as alias for the legacy ntfs driver
  block: fix module reference leakage from bdev_open_by_dev error path
  fs: Return ENOTTY directly if FS_IOC_GETUUID or FS_IOC_GETFSSYSFSPATH fail

Merge tag 'loongarch-fixes-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch fixes from Huacai Chen:
 "Fix some build errors and some trivial runtime bugs"

* tag 'loongarch-fixes-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  LoongArch: Lately init pmu after smp is online
  LoongArch: Fix callchain parse error with kernel tracepoint events
  LoongArch: Fix access error when read fault on a write-only VMA
  LoongArch: Fix a build error due to __tlb_remove_tlb_entry()
  LoongArch: Fix Kconfig item and left code related to CRASH_CORE

Pull maintainer entry update from Uwe Kleine-König:
 "This is just an update to my maintainer entries as I will switch jobs
  soon. Getting a contact email address into the MAINTAINERS file that
  will work also after my switch will hopefully reduce people mailing to
  the then non-existing address.

  I also drop my co-maintenance for SIOX, but that continues to be in
  good hands"

* tag 'pwm/for-6.9-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
  MAINTAINERS: Update Uwe's email address, drop SIOX maintenance

Pull drm fixes from Dave Airlie:
 "Regular weekly merge request, mostly amdgpu and misc bits in
  xe/etnaviv/gma500 and some core changes. Nothing too outlandish, seems
  to be about normal for this time of release.

  atomic-helpers:
   - Fix memory leak in drm_format_conv_state_copy()

  fbdev:
   - fbdefio: Fix address calculation

  amdgpu:
   - Suspend/resume fix
   - Don't expose gpu_od directory if it's empty
   - SDMA 4.4.2 fix
   - VPE fix
   - BO eviction fix
   - UMSCH fix
   - SMU 13.0.6 reset fixes
   - GPUVM flush accounting fix
   - SDMA 5.2 fix
   - Fix possible UAF in mes code

  amdkfd:
   - Eviction fence handling fix
   - Fix memory leak when GPU memory allocation fails
   - Fix dma-buf validation
   - Fix rescheduling of restore worker
   - SVM fix

  gma500:
   - Fix crash during boot

  etnaviv:
   - fix GC7000 TX clock gating
   - revert NPU UAPI changes

  xe:
   - Fix error paths on managed allocations
   - Fix PF/VF relay messages"

* tag 'drm-fixes-2024-04-26' of https://gitlab.freedesktop.org/drm/kernel: (23 commits)
  Revert "drm/etnaviv: Expose a few more chipspecs to userspace"
  drm/etnaviv: fix tx clock gating on some GC7000 variants
  drm/xe/guc: Fix arguments passed to relay G2H handlers
  drm/xe: call free_gsc_pkt only once on action add failure
  drm/xe: Remove sysfs only once on action add failure
  fbdev: fix incorrect address computation in deferred IO
  drm/amdgpu/mes: fix use-after-free issue
  drm/amdgpu/sdma5.2: use legacy HDP flush for SDMA2/3
  drm/amdgpu: Fix the ring buffer size for queue VM flush
  drm/amdkfd: Add VRAM accounting for SVM migration
  drm/amd/pm: Restore config space after reset
  drm/amdgpu/umsch: don't execute umsch test when GPU is in reset/suspend
  drm/amdkfd: Fix rescheduling of restore worker
  drm/amdgpu: Update BO eviction priorities
  drm/amdgpu/vpe: fix vpe dpm setup failed
  drm/amdgpu: Assign correct bits for SDMA HDP flush
  drm/amdgpu/pm: Remove gpu_od if it's an empty directory
  drm/amdkfd: make sure VM is ready for updating operations
  drm/amdgpu: Fix leak when GPU memory allocation fails
  drm/amdkfd: Fix eviction fence handling
  ...

Merge tag 'mtk-soc-fixes-for-v6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into for-next

MediaTek driver fixes for v6.9

This fixes the MediaTek SVS driver to look for the right thermal zone
names, and adds a missing Kconfig dependency for mtk-socinfo.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Christoph Müllner <christoph.muellner@vrull.eu> says:

Currently, the Linux kernel suffers from a boot regression when running
on the c906 QEMU emulation. Details have been reported here by Björn Töpel:
  https://lists.gnu.org/archive/html/qemu-devel/2024-01/msg04766.html

The main issue is, that Linux enables XTheadMae for CPUs that have a T-Head
mvendorid but QEMU maintainers don't want to emulate a CPU that uses
reserved bits in PTEs. See also the following discussion for more
context:
  https://lists.gnu.org/archive/html/qemu-devel/2024-02/msg00775.html

This series renames "T-Head PBMT" to "MAE"/"XTheadMae" and only enables
it if the th.sxstatus.MAEE bit is set.

The th.sxstatus CSR is documented here:
  https://github.com/T-head-Semi/thead-extension-spec/blob/master/xtheadsxstatus.adoc

XTheadMae is documented here:
  https://github.com/T-head-Semi/thead-extension-spec/blob/master/xtheadmae.adoc

The QEMU patch to emulate th.sxstatus with the MAEE bit not set is here:
  https://lore.kernel.org/all/20240329120427.684677-1-christoph.muellner@vrull.eu/

After applying the referenced QEMU patch, this patchset allows to
successfully boot a C906 QEMU system emulation ("-cpu thead-c906").

* b4-shazam-lts:
  riscv: T-Head: Test availability bit before enabling MAE errata
  riscv: thead: Rename T-Head PBMT to MAE

Link: https://lore.kernel.org/r/20240407213236.2121592-1-christoph.muellner@vrull.euSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>