MX8 SoC is comprised of a few HW subsystems while some of them can be
reused in the different SoCs. So let's re-orginize them into subsystems
in device tree as well for the possible reuse of the common part.

Note, as there's still no devices of hsio subsys, so removed it
first instead of creating a subsys headfile with no devices.
They will be added back when new devices added.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

SCU clock depends on SCU Power domain. Moving scu pd node before
scu clock can save a hundred of defer probes of all system devices
which depends on power domain and clocks.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

According to binding doc, add the fallback compatible string for
scu pd.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

There is wdog[2,3] in i.MX8MP, so add them.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

The Kontron pitx-imx8m board is based on an i.MX8MQ soc.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Michael Walle <michael@walle.cc>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

The board has both MACs routed out, enable the EQOS.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dong Aisheng <aisheng.dong@nxp.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Add EQOS GMAC node per Documentation/devicetree/bindings/net/imx-dwmac.txt ,
leave out the nvmem entries as that is not yet available, so the MAC has to
be passed in via DT by the bootloader.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dong Aisheng <aisheng.dong@nxp.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Engicam EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive
Evaluation Board.

Genaral features:
- LCD 7" C.Touch
- microSD slot
- Ethernet 1Gb
- Wifi/BT
- 2x LVDS Full HD interfaces
- 3x USB 2.0
- 1x USB 3.0
- HDMI Out
- Mini PCIe
- MIPI CSI
- 2x CAN
- Audio Out

i.Core MX8M Mini is an EDIMM SoM based on NXP i.MX8M Mini from Engicam.

i.Core MX8M Mini needs to mount on top of this Evaluation board for
creating complete i.Core MX8M Mini EDIMM2.2 Starter Kit.

PCIe, DSI, CSI nodes will add it into imx8mm-engicam-edimm2.2.dtsi once
Mainline Linux supported.

Add support for it.
Signed-off-by: Matteo Lisi <matteo.lisi@engicam.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Engicam C.TOUCH 2.0 is an EDIMM compliant general purpose Carrier
board.

Genaral features:
- Ethernet 10/100
- Wifi/BT
- USB Type A/OTG
- Audio Out
- CAN
- LVDS panel connector

i.Core MX8M Mini is an EDIMM SoM based on NXP i.MX8M Mini from Engicam.

i.Core MX8M Mini needs to mount on top of this Carrier board for
creating complete i.Core MX8M Mini C.TOUCH 2.0 board.

Add support for it.
Signed-off-by: Matteo Lisi <matteo.lisi@engicam.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

i.Core MX8M Mini is an EDIMM SoM based on NXP i.MX8M Mini
from Engicam.

General features:
- NXP i.MX8M Mini
- Up to 2GB LDDR4
- 8/16GB eMMC
- Gigabit Ethernet
- USB 2.0 Host/OTG
- PCIe Gen2 interface
- I2S
- MIPI DSI to LVDS
- rest of i.MX8M Mini features

i.Core MX8M Mini needs to mount on top of Engicam baseboards
for creating complete platform solutions.

Add support for it.
Signed-off-by: Matteo Lisi <matteo.lisi@engicam.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Per dt-bindings, the clock-names sequence should be ipg ahb per to pass
dtbs_check.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Add audio description and pin muxing.
Signed-off-by: Adrien Grassein <adrien.grassein@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Add FlexSPI description an pin muxing.
Signed-off-by: Adrien Grassein <adrien.grassein@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Add description for the four PWMs.
Signed-off-by: Adrien Grassein <adrien.grassein@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Remove useless clocks in UART 2
Signed-off-by: Adrien Grassein <adrien.grassein@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Add description and pin muxing for UARTs.
Signed-off-by: Adrien Grassein <adrien.grassein@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Add description of USB.
usbotg2 seems to not working on all boards (including ones
from variscite).
Signed-off-by: Adrien Grassein <adrien.grassein@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Add VMMC and VQMMC description for USDHC1 (eMMC).
There are comming directly from the alimentation
stage, so add the vref_3V3 fixed regulator.
Signed-off-by: Adrien Grassein <adrien.grassein@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Add usdhc3 description which corresponds to the wifi/bt chip
Signed-off-by: Adrien Grassein <adrien.grassein@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

This allows for automatic output source switching in userspace. Enable
the pullup on the GPIO to actually make it trigger and mark it as
active-high since detection is reversed otherwise.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Add mux so we can select either headset or built-in microphone input.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

The SGTL500s LINEINL and LINEINR are N/C.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Wire up the amplifier that drives the builtin speaker.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

The codec is currently named after the chip but it should be named like
the device itself since otherwise it's impossible to distinguish it from
other devices using the same codec (e.g. in alsa's UCM).
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

On Birch I can never reach 220 and hence the display would never
turn off. Tests suggest 120 to be a good threshold value for all Birch
devices.
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

These sections should be read only as they contain important data.
Signed-off-by: Angus Ainslie <angus@akkea.ca>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

IMX8MQ_AUDIO_PLL1 and IMX8MQ_AUDIO_PLL2 are setup to the same rates
right on the clock controller.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

The PMIC driver now sets appropriate default delays.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Enable 100Mhz and 200MHz pinmux and corrsesponding voltage supplies
to enable SDR104 on usdhc1 connecting the WiFi chip.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

The legacy interrupt INT_A is hardwired to the event collector. RCEC is
bascially supported starting with v5.11. Having a correct interrupt, will
make RCEC at least probe correctly.

There are still issues with how RCEC is implemented in the RCiEP on the
LS1028A. RCEC will report an error, but it cannot find the correct
subdevice.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Pass the i2c3 unit name to fix the following W=1 build warning:

arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts:159.8-172.5: Warning (unit_address_vs_reg): /soc@0/bus@30800000/i2c@30a40000/i2cmux@70/i2c3: node has a reg or ranges property, but no unit name
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Pull rdma fixes from Jason Gunthorpe:
 "Nothing special here, though Bob's regression fixes for rxe would have
  made it before the rc cycle had there not been such strong winter
  weather!

   - Fix corner cases in the rxe reference counting cleanup that are
     causing regressions in blktests for SRP

   - Two kdoc fixes so W=1 is clean

   - Missing error return in error unwind for mlx5

   - Wrong lock type nesting in IB CM"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/rxe: Fix errant WARN_ONCE in rxe_completer()
  RDMA/rxe: Fix extra deref in rxe_rcv_mcast_pkt()
  RDMA/rxe: Fix missed IB reference counting in loopback
  RDMA/uverbs: Fix kernel-doc warning of _uverbs_alloc
  RDMA/mlx5: Set correct kernel-doc identifier
  IB/mlx5: Add missing error code
  RDMA/rxe: Fix missing kconfig dependency on CRYPTO
  RDMA/cm: Fix IRQ restore in ib_send_cm_sidr_rep

Pull gcc-plugins fixes from Kees Cook:
 "Tiny gcc-plugin fixes for v5.12-rc2. These issues are small but have
  been reported a couple times now by static analyzers, so best to get
  them fixed to reduce the noise. :)

   - Fix coding style issues (Jason Yan)"

* tag 'gcc-plugins-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  gcc-plugins: latent_entropy: remove unneeded semicolon
  gcc-plugins: structleak: remove unneeded variable 'ret'

Pull pstore fixes from Kees Cook:

 - Rate-limit ECC warnings (Dmitry Osipenko)

 - Fix error path check for NULL (Tetsuo Handa)

* tag 'pstore-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  pstore/ram: Rate-limit "uncorrectable error in header" message
  pstore: Fix warning in pstore_kill_sb()

Merge tag 'for-5.12/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:
 "Fix DM verity target's optional Forward Error Correction (FEC) for
  Reed-Solomon roots that are unaligned to block size"

* tag 'for-5.12/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm verity: fix FEC for RS roots unaligned to block size
  dm bufio: subtract the number of initial sectors in dm_bufio_get_device_size

Pull block fixes from Jens Axboe:

 - NVMe fixes:
      - more device quirks (Julian Einwag, Zoltán Böszörményi, Pascal
        Terjan)
      - fix a hwmon error return (Daniel Wagner)
      - fix the keep alive timeout initialization (Martin George)
      - ensure the model_number can't be changed on a used subsystem
        (Max Gurtovoy)

 - rsxx missing -EFAULT on copy_to_user() failure (Dan)

 - rsxx remove unused linux.h include (Tian)

 - kill unused RQF_SORTED (Jean)

 - updated outdated BFQ comments (Joseph)

 - revert work-around commit for bd_size_lock, since we removed the
   offending user in this merge window (Damien)

* tag 'block-5.12-2021-03-05' of git://git.kernel.dk/linux-block:
  nvmet: model_number must be immutable once set
  nvme-fabrics: fix kato initialization
  nvme-hwmon: Return error code when registration fails
  nvme-pci: add quirks for Lexar 256GB SSD
  nvme-pci: mark Kingston SKC2000 as not supporting the deepest power state
  nvme-pci: mark Seagate Nytro XM1440 as QUIRK_NO_NS_DESC_LIST.
  rsxx: Return -EFAULT if copy_to_user() fails
  block/bfq: update comments and default value in docs for fifo_expire
  rsxx: remove unused including <linux/version.h>
  block: Drop leftover references to RQF_SORTED
  block: revert "block: fix bd_size_lock use"

Pull io_uring fixes from Jens Axboe:
 "A bit of a mix between fallout from the worker change, cleanups and
  reductions now possible from that change, and fixes in general. In
  detail:

   - Fully serialize manager and worker creation, fixing races due to
     that.

   - Clean up some naming that had gone stale.

   - SQPOLL fixes.

   - Fix race condition around task_work rework that went into this
     merge window.

   - Implement unshare. Used for when the original task does unshare(2)
     or setuid/seteuid and friends, drops the original workers and forks
     new ones.

   - Drop the only remaining piece of state shuffling we had left, which
     was cred. Move it into issue instead, and we can drop all of that
     code too.

   - Kill f_op->flush() usage. That was such a nasty hack that we had
     out of necessity, we no longer need it.

   - Following from ->flush() removal, we can also drop various bits of
     ctx state related to SQPOLL and cancelations.

   - Fix an issue with IOPOLL retry, which originally was fallout from a
     filemap change (removing iov_iter_revert()), but uncovered an issue
     with iovec re-import too late.

   - Fix an issue with system suspend.

   - Use xchg() for fallback work, instead of cmpxchg().

   - Properly destroy io-wq on exec.

   - Add create_io_thread() core helper, and use that in io-wq and
     io_uring. This allows us to remove various silly completion events
     related to thread setup.

   - A few error handling fixes.

  This should be the grunt of fixes necessary for the new workers, next
  week should be quieter. We've got a pending series from Pavel on
  cancelations, and how tasks and rings are indexed. Outside of that,
  should just be minor fixes. Even with these fixes, we're still killing
  a net ~80 lines"

* tag 'io_uring-5.12-2021-03-05' of git://git.kernel.dk/linux-block: (41 commits)
  io_uring: don't restrict issue_flags for io_openat
  io_uring: make SQPOLL thread parking saner
  io-wq: kill hashed waitqueue before manager exits
  io_uring: clear IOCB_WAITQ for non -EIOCBQUEUED return
  io_uring: don't keep looping for more events if we can't flush overflow
  io_uring: move to using create_io_thread()
  kernel: provide create_io_thread() helper
  io_uring: reliably cancel linked timeouts
  io_uring: cancel-match based on flags
  io-wq: ensure all pending work is canceled on exit
  io_uring: ensure that threads freeze on suspend
  io_uring: remove extra in_idle wake up
  io_uring: inline __io_queue_async_work()
  io_uring: inline io_req_clean_work()
  io_uring: choose right tctx->io_wq for try cancel
  io_uring: fix -EAGAIN retry with IOPOLL
  io-wq: fix error path leak of buffered write hash map
  io_uring: remove sqo_task
  io_uring: kill sqo_dead and sqo submission halting
  io_uring: ignore double poll add on the same waitqueue head
  ...

Pull power management fixes from Rafael Wysocki:
 "These fix the usage of device links in the runtime PM core code and
  update the DTPM (Dynamic Thermal Power Management) feature added
  recently.

  Specifics:

   - Make the runtime PM core code avoid attempting to suspend supplier
     devices before updating the PM-runtime status of a consumer to
     'suspended' (Rafael Wysocki).

   - Fix DTPM (Dynamic Thermal Power Management) root node
     initialization and label that feature as EXPERIMENTAL in Kconfig
     (Daniel Lezcano)"

* tag 'pm-5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  powercap/drivers/dtpm: Add the experimental label to the option description
  powercap/drivers/dtpm: Fix root node initialization
  PM: runtime: Update device status before letting suppliers suspend

Pull ACPI fix from Rafael Wysocki:
 "Make the empty stubs of some helper functions used when CONFIG_ACPI is
  not set actually match those functions (Andy Shevchenko)"

* tag 'acpi-5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: bus: Constify is_acpi_node() and friends (part 2)