- 21 Oct, 2004 40 commits
-
-
Jeff Garzik authored
into pobox.com:/garz/repo/net-drivers-2.6
-
Alexander Viro authored
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
-
Alexander Viro authored
disable_irq() needs asm/irq.h and not everyone who needs it gets it included indirectly. Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
-
Paul Fulghum authored
Here is the hangup implementation for ppp_synctty.c (same as patch previously for ppp_asynctty.c) Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
bk://linux-mtd.bkbits.net/mtd-2.6Linus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
Randy Dunlap authored
Use %p to print a pointer, so that its length doesn't matter and so that gcc won't complain. drivers/mtd/maps/dilnetpc.c:416: warning: long unsigned int format, pointer arg (arg 2) Signed-off-by: Randy Dunlap <rddunlap@osdl.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
-
Paul Fulghum authored
I reviewed, patched, and tested ppp_async.c to implement ldisc->hangup(). This correctly terminates the PPP connection on hangup. Paul Mackerras already did an excellent job of ensuring safe shutdown and I/O completion in ldisc->close so the change is trivial: just add the ldisc->hangup and call the existing close routine. Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
bk://gkernel.bkbits.net/libata-2.6Linus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
Adrian Bunk authored
Below is a patch from Denis Zaitsev <zzz@anda.ru> with the following two adjustments: - applies with -p1 (not -p0) - USRobotics -> U.S. Robotics (consistent with the rest of the entries) Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Yoichi Yuasa authored
The MIPS Makefile was changed so that the offset of data section may not be dependent on a specific machine header file. Signed-off-by: Yoichi Yuasa <yuasa@hh.iij4u.or.jp> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Dinakar Guniguntala authored
One more place in fs/proc/array.c where ppid is wrong, which I missed in my previous mail to lkml. Signed-off-by: Dinakar Guniguntala <dino@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Stefan Esser authored
From: <Urban.Widmark@enlight.net> The memset is because it was previously possible to send always the same CIFS fragment and use this to increase the data counters. When the data counter "exceeds" the amount of bytes expected this will return the buffer only partially initialised... With findfirst etc requests this should allow leaking kernel memory content. The other thing is that the data is only returned when data_tot and parm_tot both "exceed" the expected values. Previously it was possible to create a sequence of CIFS fragments that allowed exceeding the counters. The calling functions then would believe they received a number of bytes that does not fit into the allocated buffer. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Andy Whitcroft authored
When a system has a very large imbalance of overall memory size to ZONE_NORMAL (for example when large amounts of numa remap space are in use) page_writeback_init() may incorrectly set vm_dirty_ratio and dirty_background_ratio to zero; leading to divide by zero errors elsewhere. This patch bounds these at 1%. Signed-off-by: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Randy Dunlap authored
Error: ./drivers/media/video/cx88/cx88-video.o .data refers to 0000000000000b28 R_X86_64_64 .exit.text Signed-off-by: Randy Dunlap <rddunlap@osdl.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Randy Dunlap authored
Error: ./drivers/media/dvb/bt8xx/bt878.o .data refers to 0000000000000048 R_X86_64_64 .exit.text Signed-off-by: Randy Dunlap <rddunlap@osdl.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Randy Dunlap authored
Error: ./drivers/media/video/saa7134/saa7134-core.o .data refers to 0000000000000028 R_X86_64_64 .exit.text Signed-off-by: Randy Dunlap <rddunlap@osdl.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Hirokazu Takata authored
Here is a patch for M32R SIO driver, which replaces deprecated MODULE_PARAM() with modern module_param(). * drivers/serial/m32r_sio.c: - Replace MODULE_PARAM() with module_param(). - Fix a typo: UARRT_RSA_BASE --> UART_RSA_BASE. Signed-off-by: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Werner Almesberger authored
In ia32 emulation, the amd64 kernel refuses the ioctls TIOCSBRK and TIOCCBRK with EINVAL. I've attached a patch that adds them to the compatibility list. Since all architectures have these ioctls ("m68knommu" inherits them from "m68k", "um" from its host) and use the same code, I think adding them to compat_ioctl.h is the correct choice (as opposed to adding them to arch/x86_64/ia32/ia32_ioctl.c). Signed-off-by: Werner Almesberger <werner@almesberger.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Olof Johansson authored
There seems to have been a couple of thinkos in the NUMA init code, in particular in find_cpu_node(): * Property size returned is in bytes, not words * Off-by-one error in loop iteration Signed-off-by: Nathan Lynch <nathanl@austin.ibm.com> Signed-off-by: Olof Johansson <olof@austin.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Paul Mackerras authored
When the generic IRQ patch went in, it changed the behaviour of setup_irq (compared to the previous ppc64 version) in that we now don't call the handler's enable function if it has a startup function. The XICS interrupt controller has a startup function, and so we weren't getting any interrupts through the XICS because they never got enabled. This patch adds a call to xics_enable_irq to xics_startup and fixes the problem. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Stephen Rothwell authored
One of the iSeries specific files used HZ without including linux/param.h and previously got away with it. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Matt Porter authored
Fix ibm44x_common.c compile. Signed-off-by: Eugene Surovegin <ebs@ebshome.net> Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Roland Dreier authored
Recent changes to arch/ppc/boot/lib/Makefile cause CC arch/ppc/boot/lib/../../../../lib/zlib_inflate/infblock.o Assembler messages: FATAL: can't create arch/ppc/boot/lib/../../../../lib/zlib_inflate/infblock.o: No such file or directory when building a ppc kernel using O=$(output_dir) with CONFIG_ZLIB_INFLATE=n, because the $(output_dir)/lib/zlib_inflate directory doesn't get created. This patch, which makes arch/ppc/boot/lib/Makefile create the directory if needed, is one fix for the problem. Signed-off-by: Roland Dreier <roland@topspin.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Matt Porter authored
This patch removes the bogus workaround for dcache prefetch beyond the end of the physical memory. Signed-off-by: Eugene Surovegin <ebs@ebshome.net> Signed-off-by: Matt Porter <mporter@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Hideo Aoki authored
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
Instead, tty_io.c will always copy user space data to kernel space, leaving the drivers to worry only about normal kernel buffers. No more "from_user" flag, and having the user copy in each driver. This cleans up the code and also fixes a number of locking bugs.
-
David Woodhouse authored
- Reduce memory use by merging adjacent obsolete raw_node_refs - Error handling fixes - Respect kmalloc size limit in scan - NAND ECC updates Signed-Off-By: David Woodhouse <dwmw2@infradead.org>
-
Thomas Gleixner authored
- Use new RS library for ECC - Add support for new NAND flash chips - New board support: - iPAQ H1910 - Renesas AG-AND devel board - Simtec S3C210 - Support for shared controllers on multiple chips. Signed-Off-By: Thomas Gleixner <tglx@linutronix.de> Signed-Off-By: David Woodhouse <dwmw2@infradead.org>
-
David Woodhouse authored
Signed-Off-By: David Woodhouse <dwmw2@infradead.org>
-
Thomas Gleixner authored
Signed-Off-By: Thomas Gleixner <tglx@linutronix.de> Signed-Off-By: David Woodhouse <dwmw2@infradead.org>
-
David Woodhouse authored
Patch from Todd Poynor Signed-Off-By: David Woodhouse <dwmw2@infradead.org>
-
David Woodhouse authored
Mostly from Eric Biederman for supporting BIOS flash. - Move support firmware hub style lock and unlock into fhw_lock.h (from cfi_cmdset_0002) - Move cfi_varsize_frob into cfi_util from cfi_cmdset_0001.c and cfi_cmdset_0002.c - reduce gen_probe probe failuers to a debug level message - Modify cfi_fixup to take a struct mtd_info instead of a struct map_info So that the fixup routines can modify the mtd functions. - Modify cfi_cmdset_0001() to allocate and initialize the mtd structure before calling cfi_fixup. - Modify cfi_cmdset_0002() to allocate and initialize the mtd structure before calling cfi_fixup. - Refactor the hard coded fixups in cfi_cmdset_0001 and cfi_cmdset_0002 so the improved cfi_fixup infrastructure. - Rewrote amd76xrom and ichxrom. They now report their starting physical address in their name. They now both handle multiple bankwidth configurations They both can create multipe mtd devices. They both now assume the rom windows are properly opened by the BIOS or whatever runs previous to them. Their code is now synchromized so it is almost identical, and could be a starting point for a x86_rom_probe. Signed-Off-By: David Woodhouse <dwmw2@infradead.org>
-
David Woodhouse authored
- Technology Systems TS-5500 board - Simtec BAST - IBM 440GX Ocotea Signed-Off-By: David Woodhouse <dwmw2@infradead.org>
-
Thomas Gleixner authored
This is sane, as the driver returns the real data and the return value is for information of NAND aware filesystems. Userspace access to raw NAND is usually restricted to debugging tools which are aware of the NAND specific problems. Signed-Off-By: Thomas Gleixner <tglx@linutronix.de> Signed-Off-By: David Woodhouse <dwmw2@infradead.org>
-
David Woodhouse authored
Patch from Ben Dooks <ben-mtd@fluff.org> Signed-Off-By: David Woodhouse <dwmw2@infradead.org>
-
David Woodhouse authored
- Update mporter email address - Include file fixups - Tglx's __iomem fixes Signed-Off-By: David Woodhouse <dwmw2@infradead.org>
-
David Woodhouse authored
- Change Pete Popov's email address - Tglx's __iomem fixes - Include file cleanups Signed-Off-By: David Woodhouse <dwmw2@infradead.org>
-
David Woodhouse authored
... by making mtdpart_setup() non-static Patch from Juha Yrjölä committed by Jarkko Lavinen. Signed-Off-By: David Woodhouse <dwmw2@infradead.org>
-
Thomas Gleixner authored
Signed-Off-By: Thomas Gleixner <tglx@linutronix.de> Signed-Off-By: David Woodhouse <dwmw2@infradead.org>
-
Thomas Gleixner authored
Signed-Off-By: Thomas Gleixner <tglx@linutronix.de> Signed-Off-By: David Woodhouse <dwmw2@infradead.org>
-