- 10 May, 2020 11 commits
-
-
Andrew Lunn authored
Make some helpers for building ethtool netlink messages available outside the compilation unit, so they can be used for building messages which are not simple get/set. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Andrew Lunn authored
Add the attributes needed to report cable test results to userspace. The reports are expected to be per twisted pair. A nested property per pair can report the result of the cable test. A nested property can also report the length of the cable to any fault. v2: Grammar fixes Change length from u16 to u32 s/DEV/HEADER/g Add status attributes Rename pairs from numbers to letters. v3: Fixed example in document Add ETHTOOL_A_CABLE_NEST_* enum Add ETHTOOL_MSG_CABLE_TEST_NTF to documentation Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
-
Andrew Lunn authored
Add new ethtool netlink calls to trigger the starting of a PHY cable test. Add Kconfig'ury to ETHTOOL_NETLINK so that PHYLIB is not a module when ETHTOOL_NETLINK is builtin, which would result in kernel linking errors. v2: Remove unwanted white space change Remove ethnl_cable_test_act_ops and use doit handler Rename cable_test_set_policy cable_test_act_policy Remove ETHTOOL_MSG_CABLE_TEST_ACT_REPLY v3: Remove ETHTOOL_MSG_CABLE_TEST_ACT_REPLY from documentation Remove unused cable_test_get_policy Add Reviewed-by tags v4: Remove unwanted blank line Signed-off-by:
-
Andrew Lunn authored
Some PHYs are not capable of generating interrupts when a cable test finished. They do however support interrupts for normal operations, like link up/down. As such, the PHY state machine would normally not poll the PHY. Add support for indicating the PHY state machine must poll the PHY when performing a cable test. Signed-off-by:
-
Andrew Lunn authored
Running a cable test is desruptive to normal operation of the PHY and can take a 5 to 10 seconds to complete. The RTNL lock cannot be held for this amount of time, and add a new state to the state machine for running a cable test. The driver is expected to implement two functions. The first is used to start a cable test. Once the test has started, it should return. The second function is called once per second, or on interrupt to check if the cable test is complete, and to allow the PHY to report the status. v2: Rename phy_cable_test_abort to phy_abort_cable_test Return different extack when already running test Use phy_init_hw() to reset the PHY Reviewed-by:
-
Colin Ian King authored
The variable status is being initializeed with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by:Colin Ian King <colin.king@canonical.com> Acked-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Colin Ian King authored
The variable ret is being initializeed with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: -
Colin Ian King authored
The variable ret is being initializeed with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: -
kbuild test robot authored
drivers/net/dsa/sja1105/sja1105_ethtool.c:481:11-12: Unneeded semicolon Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci Fixes: ae1804de ("dsa: sja1105: dynamically allocate stats structure") CC: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
-
Kevin Hao authored
In the current codes, the octeontx2 uses its own method to allocate the pool buffers, but there are some issues in this implementation. 1. We have to run the otx2_get_page() for each allocation cycle and this is pretty error prone. As I can see there is no invocation of the otx2_get_page() in otx2_pool_refill_task(), this will leave the allocated pages have the wrong refcount and may be freed wrongly. 2. It wastes memory. For example, if we only receive one packet in a NAPI RX cycle, and then allocate a 2K buffer with otx2_alloc_rbuf() to refill the pool buffers and leave the remain area of the allocated page wasted. On a kernel with 64K page, 62K area is wasted. IMHO it is really unnecessary to implement our own method for the buffers allocate, we can reuse the napi_alloc_frag() to simplify our code. Signed-off-by:
Kevin Hao <haokexin@gmail.com> Signed-off-by:
-
Gustavo A. R. Silva authored
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] sizeof(flexible-array-member) triggers a warning because flexible array members have incomplete type[1]. There are some instances of code in which the sizeof operator is being incorrectly/erroneously applied to zero-length arrays and the result is zero. Such instances may be hiding some bugs. So, this work (flexible-array member conversions) will also help to get completely rid of those sorts of issues. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by:Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
-
- 09 May, 2020 29 commits
-
-
Jakub Kicinski authored
Ido Schimmel says: ==================== mlxsw: spectrum: Enforce some HW limitations for matchall TC offload Jiri says: There are some limitations for TC matchall classifier offload that are given by the mlxsw HW dataplane. It is not possible to do sampling on egress and also the mirror/sample vs. ACL (flower) ordering is fixed. So check this and forbid to offload incorrect setup. ==================== Signed-off-by: -
Jiri Pirko authored
Make sure that the drive restricts incorrect order of inserted matchall vs. flower rules. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Jiri Pirko authored
Check that matchall rules with sample actions are not possible to be inserted to egress. Signed-off-by:
-
Jiri Pirko authored
The file is about to contain matchall restrictions too, so change the name to make it more generic. Signed-off-by:
-
Jiri Pirko authored
On ingress, the matchall rules doing mirroring and sampling are offloaded into hardware blocks that are processed before any flower rules. On egress, the matchall mirroring rules are offloaded into hardware block that is processed after all flower rules. Therefore check the priorities of inserted flower rules against existing matchall rules and ensure the correct ordering. Signed-off-by:
-
Jiri Pirko authored
On ingress, the matchall rules doing mirroring and sampling are offloaded into hardware blocks that are processed before any flower rules. On egress, the matchall mirroring rules are offloaded into hardware block that is processed after all flower rules. Therefore check the priorities of inserted matchall rules against existing flower rules and ensure the correct ordering. Signed-off-by:
-
Jiri Pirko authored
Introduce an infrastructure that allows to get minimum and maximum rule priority for specified chain. This is going to be used by a subsequent patch to enforce ordering between flower and matchall filters. Signed-off-by:
-
Jiri Pirko authored
As there are going to be other matchall specific fields in flow structure, put the existing list field into matchall substruct. Signed-off-by:
-
Jiri Pirko authored
Introduce an infrastructure that allows to get minimum and maximum rule priority for specified chain. This is going to be used by a subsequent patch to enforce ordering between flower and matchall filters. Signed-off-by:
-
Jiri Pirko authored
HW supports packet sampling on ingress only. Check and fail if user is adding sample on egress. Signed-off-by:
-
Luo bin authored
adds ndo_set_vf_rate/ndo_set_vf_spoofchk/ndo_set_vf_link_state to configure netdev of virtual function Signed-off-by:
Luo bin <luobin9@huawei.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxJakub Kicinski authored
Saeed Mahameed says: ==================== mlx5-updates-2020-05-09 This series includes updates to mlx5 netdev driver and bonding updates to support getting the next active tx slave. 1) merge commit with mlx5-next that includes bonding updates from Maor Bonding: Add support to get xmit slave 2) Maxim makes some general code improvements to TX data path 3) Tariq makes some general code improvements to kTLS and mlx5 accel layer in preparation for mlx5 TLS RX. ==================== Signed-off-by: -
Jakub Kicinski authored
Mark Starovoytov says: ==================== net: atlantic: driver updates This patch series contains several minor cleanups for the previously submitted series. We also add Marvell copyrights on newly touched files. v2: * accommodated review comments related to the last patch in series (MAC generation) v1: https://patchwork.ozlabs.org/cover/1285011/ ==================== Signed-off-by:
-
Mark Starovoytov authored
This patch unifies invalid MAC address handling with other drivers. Basically we've switched to using standard APIs (is_valid_ether_addr / eth_hw_addr_random) where possible. It's worth noting that some of engineering Aquantia NICs might be provisioned with a partially zeroed out MAC, which is still invalid, but not caught by is_valid_ether_addr(), so we've added a special handling for this case. Also adding a warning in case of fallback to random MAC, because this shouldn't be needed on production NICs, they should all be provisioned with unique MAC. NB! Default systemd/udevd configuration is 'MACAddressPolicy=persistent'. This causes MAC address to be persisted across driver reloads and reboots. We had to change it to 'none' for verification purposes. Signed-off-by:Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by:
Igor Russkikh <irusskikh@marvell.com> Signed-off-by:
-
Mark Starovoytov authored
This patch removes unnecessary check for boot code survivability before reset request. Signed-off-by:
-
Mark Starovoytov authored
No need to call hw_atl_b0_hw_rss_set from hw_atl2_hw_rss_set Signed-off-by:
-
Mark Starovoytov authored
TPO2 was introduced in B0 only, no reason to check for it in A0 code. Signed-off-by:
-
Mark Starovoytov authored
This patch changes the constant name to a more logical "2G5" (for 2.5G speeds). Signed-off-by:
-
Mark Starovoytov authored
This patch fixes a couple of minor merge issues found in macsec_api.c after corresponding patch series has been applied. These are not real bugs, so pushing to net-next. Signed-off-by:
-
Mark Starovoytov authored
This patches fixes the review comment made by Jakub Kicinski in the "net: atlantic: A2 support" patch series. Signed-off-by:
-
Tariq Toukan authored
The same WQE opcode might be used in different ICOSQ flows and WQE types. To have a better distinguishability, replace it with an enum that better indicates the WQE type and flow it is used for. Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Reviewed-by:
Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Tariq Toukan authored
The include of Ethernet driver header in core is not needed and actually wrong. Remove it. Signed-off-by:
-
Tariq Toukan authored
Struct assignment looks more clean, and implies resetting the not assigned fields to zero, instead of holding values from older ring cycles. Signed-off-by:
-
Tariq Toukan authored
Into the txrx header file. The mlx5e_sq_wqe_info structure describes WQE info for the ICOSQ, rename it to better reflect this. Signed-off-by:
-
Tariq Toukan authored
Every single DUMP WQE resides in a single WQEBB. As the pi is calculated per each one separately, there is no real need for a contiguous room for them, allow them to populate different WQ fragments. This reduces WQ waste and improves its utilization. Signed-off-by:
-
Tariq Toukan authored
For the static and progress context params WQEs, do the edge filling separately. This improves the WQ utilization, code readability, and reduces the chance of future bugs. Signed-off-by:
-
Maxim Mikityanskiy authored
After previous modifications, the offloads are no longer called one by one, the pi is calculated and the wqe is cleared on between of TLS and IPSEC offloads, which doesn't quite fit mlx5e_accel_handle_tx's purpose. This patch splits mlx5e_accel_handle_tx into two functions that correspond to two logical phases of running offloads: 1. Before fetching a WQE. Here runs the code that can post WQEs on its own, before the main WQE is fetched. It's the main part of TLS offload. 2. After fetching a WQE. Here runs the code that updates the WQE's fields, but can't post other WQEs any more. It's a minor part of TLS offload that sets the tisn field in the cseg, and eseg-based offloads (currently IPSEC, and later patches will move GENEVE and checksum offloads there, too). It allows to make mlx5e_xmit take care of all actions needed to transmit a packet in the right order, improve the structure of the code and reduce unnecessary operations. The structure will be further improved in the following patches (all eseg-based offloads will be moved to a single place, and reserving space for the main WQE will happen between phase 1 and phase 2 of offloads to eliminate unneeded data movements). Signed-off-by:
-
Maxim Mikityanskiy authored
mlx5e_udp_gso_handle_tx_skb updates the length field in the UDP header in case of GSO. It doesn't interfere with other offloads, so do it first to simplify further restructuring of the code. This way we'll make all independent modifications to the SKB before starting to work with WQEs. Signed-off-by:
Raed Salem <raeds@mellanox.com> Signed-off-by:
-
Maxim Mikityanskiy authored
TLS offload may write a 32-bit field (tisn) to the cseg of the WQE. To do that, it receives pi and wqe pointers. As TLS offload may also send additional WQEs, it has to update pi and wqe, and in many cases it even doesn't use pi calculated before and wqe zeroed before and does it itself. Also, mlx5e_sq_xmit has to copy the whole cseg if it goes to the mlx5e_fill_sq_frag_edge flow. This all is not efficient. It's more efficient to do the following: 1. Just return tisn from TLS offload and make the caller fill it in a more appropriate place. 2. Calculate pi and clear wqe after calling TLS offload. 3. If TLS offload has to send WQEs, calculate pi and clear wqe just before that. It's already done in all places anyway, so this commit allows to remove some redundant memsets and calls. Copying of cseg will be eliminated in one of the following commits, and all other stuff is done here. Signed-off-by:
-
