- 06 Feb, 2024 12 commits
-
-
Justin Tee authored
There is no reason to use the shost_lock to synchronize an LLDD statistics counter. Convert all the nlp state statistic counters into atomic_t. Corresponding zeroing, increments, and reads are converted to atomic versions. Signed-off-by:
Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20240131185112.149731-13-justintee8345@gmail.comReviewed-by:
Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Justin Tee authored
Desiring to reduce the amount of unnecessary shost_lock acquisitions in the lpfc driver, it has been determined that there is no need for shost_lock protection when retrieving fc_host port information because it is only for display to user via sysfs. Signed-off-by:
-
Justin Tee authored
The ACQE notification event to reset congestion statistics should be moved into the specific lpfc_sli4_async_sli_evt() routine instead of being processed from the generic lpfc_sli4_async_event_proc() routine. Signed-off-by:
-
Justin Tee authored
FPIN frequency is provided by the fabric in peer congestion notifications. Currently, the frequency is only logged in a message, but it should also be saved into the phba's cgn_fpin statistics member for proper application functionality. Signed-off-by:
-
Justin Tee authored
The "Nodelist not empty" log message and an accompanying delay may be observed when deleting an NPIV port or unloading the lpfc driver. This can occur due to receipt of an ABTS for which there is no corresponding login context or ndlp allocated. In such cases, the driver allocates a new ndlp object to send a BLS_RJT after which the ndlp object unintentionally remains in the NLP_STE_UNUSED_NODE state forever. Add a check to conditionally remove ndlp's initial reference count when queuing a BLS response. If the initial reference is removed, then set the NLP_DROPPED flag to notify other code paths. Signed-off-by:
-
Justin Tee authored
Requests to delete an NPIV port may fail repeatedly if the initial request is received during discovery. If the FC_UNLOADING load_flag is set, then skip CT response processing for the physical port. This allows discovery processing for other lpfc_vport objects to reach their cmpl routines before deleting the vport. Signed-off-by:
-
Justin Tee authored
Upon first RSCN receipt of a target server's remote port that is initially acting as an initiator function, the driver marks the ndlp->nlp_type as an initiator role. Then later, when processing an RSCN for a target function role switch, that ndlp remote port is permanently stuck as an initiator role and can never transition to be discovered as an updated target role function. Remove the NLP_RCV_PLOGI early return if statement clause so that the NLP_NPR_2B_DISC flag gets set. This allows for role change detections. Signed-off-by:
-
Justin Tee authored
Remove the early return NLP_FABRIC check in lpfc_plogi_confirm_nport() because it is possible for switch domain controllers to change WWPN. As a result, allow lpfc_plogi_confirm_nport() to detect that a new ndlp should be initialized in such cases. The old ndlp object will be cleaned up when dev_loss_tmo callbk executes. Signed-off-by:
-
Justin Tee authored
D_ID swaps are common during cable swaps in a SAN. Thus, there's no reason to log the event at a KERN_ERR level with the trace event logger. Change the log level to KERN_INFO and the normal LOG_ELS flag. Signed-off-by:
-
Justin Tee authored
The sg_dma_len() API should be used to retrieve a scatterlist's length instead of directly accessing scatterlist->length. Signed-off-by:
-
Justin Tee authored
The call to lpfc_sli4_resume_rpi() in lpfc_rcv_padisc() may return an unsuccessful status. In such cases, the elsiocb is not issued, the completion is not called, and thus the elsiocb resource is leaked. Check return value after calling lpfc_sli4_resume_rpi() and conditionally release the elsiocb resource. Signed-off-by:
-
Justin Tee authored
A static code analyzer tool indicates that the local variable called status in the lpfc_sli4_repost_sgl_list() routine could be used to print garbage uninitialized values in the routine's log message. Fix by initializing to zero. Signed-off-by:
-
- 21 Jan, 2024 28 commits
-
-
Linus Torvalds authored
-
https://evilpiepirate.org/git/bcachefsLinus Torvalds authored
Pull more bcachefs updates from Kent Overstreet: "Some fixes, Some refactoring, some minor features: - Assorted prep work for disk space accounting rewrite - BTREE_TRIGGER_ATOMIC: after combining our trigger callbacks, this makes our trigger context more explicit - A few fixes to avoid excessive transaction restarts on multithreaded workloads: fstests (in addition to ktest tests) are now checking slowpath counters, and that's shaking out a few bugs - Assorted tracepoint improvements - Starting to break up bcachefs_format.h and move on disk types so they're with the code they belong to; this will make room to start documenting the on disk format better. - A few minor fixes" * tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefs: (46 commits) bcachefs: Improve inode_to_text() bcachefs: logged_ops_format.h bcachefs: reflink_format.h bcachefs; extents_format.h bcachefs: ec_format.h bcachefs: subvolume_format.h bcachefs: snapshot_format.h bcachefs: alloc_background_format.h bcachefs: xattr_format.h bcachefs: dirent_format.h bcachefs: inode_format.h bcachefs; quota_format.h bcachefs: sb-counters_format.h bcachefs: counters.c -> sb-counters.c bcachefs: comment bch_subvolume bcachefs: bch_snapshot::btime bcachefs: add missing __GFP_NOWARN bcachefs: opts->compression can now also be applied in the background bcachefs: Prep work for variable size btree node buffers bcachefs: grab s_umount only if snapshotting ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer updates from Thomas Gleixner: "Updates for time and clocksources: - A fix for the idle and iowait time accounting vs CPU hotplug. The time is reset on CPU hotplug which makes the accumulated systemwide time jump backwards. - Assorted fixes and improvements for clocksource/event drivers" * tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug clocksource/drivers/ep93xx: Fix error handling during probe clocksource/drivers/cadence-ttc: Fix some kernel-doc warnings clocksource/drivers/timer-ti-dm: Fix make W=n kerneldoc warnings clocksource/timer-riscv: Add riscv_clock_shutdown callback dt-bindings: timer: Add StarFive JH8100 clint dt-bindings: timer: thead,c900-aclint-mtimer: separate mtime and mtimecmp regs -
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Aneesh Kumar: - Increase default stack size to 32KB for Book3S Thanks to Michael Ellerman. * tag 'powerpc-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: Increase default stack size to 32KB
-
Kent Overstreet authored
Add line breaks - inode_to_text() is now much easier to read. Signed-off-by:Kent Overstreet <kent.overstreet@linux.dev>
-
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
bcachefs_format.h has gotten too big; let's do some organizing. Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Add a field to bch_snapshot for creation time; this will be important when we start exposing the snapshot tree to userspace. Signed-off-by: -
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
The "apply this compression method in the background" paths now use the compression option if background_compression is not set; this means that setting or changing the compression option will cause existing data to be compressed accordingly in the background. Signed-off-by: -
Kent Overstreet authored
bcachefs btree nodes are big - typically 256k - and btree roots are pinned in memory. As we're now up to 18 btrees, we now have significant memory overhead in mostly empty btree roots. And in the future we're going to start enforcing that certain btree node boundaries exist, to solve lock contention issues - analagous to XFS's AGIs. Thus, we need to start allocating smaller btree node buffers when we can. This patch changes code that refers to the filesystem constant c->opts.btree_node_size to refer to the btree node buffer size - btree_buf_bytes() - where appropriate. Signed-off-by: -
Su Yue authored
When I was testing mongodb over bcachefs with compression, there is a lockdep warning when snapshotting mongodb data volume. $ cat test.sh prog=bcachefs $prog subvolume create /mnt/data $prog subvolume create /mnt/data/snapshots while true;do $prog subvolume snapshot /mnt/data /mnt/data/snapshots/$(date +%s) sleep 1s done $ cat /etc/mongodb.conf systemLog: destination: file logAppend: true path: /mnt/data/mongod.log storage: dbPath: /mnt/data/ lockdep reports: [ 3437.452330] ====================================================== [ 3437.452750] WARNING: possible circular locking dependency detected [ 3437.453168] 6.7.0-rc7-custom+ #85 Tainted: G E [ 3437.453562] ------------------------------------------------------ [ 3437.453981] bcachefs/35533 is trying to acquire lock: [ 3437.454325] ffffa0a02b2b1418 (sb_writers#10){.+.+}-{0:0}, at: filename_create+0x62/0x190 [ 3437.454875] but task is already holding lock: [ 3437.455268] ffffa0a02b2b10e0 (&type->s_umount_key#48){.+.+}-{3:3}, at: bch2_fs_file_ioctl+0x232/0xc90 [bcachefs] [ 3437.456009] which lock already depends on the new lock. [ 3437.456553] the existing dependency chain (in reverse order) is: [ 3437.457054] -> #3 (&type->s_umount_key#48){.+.+}-{3:3}: [ 3437.457507] down_read+0x3e/0x170 [ 3437.457772] bch2_fs_file_ioctl+0x232/0xc90 [bcachefs] [ 3437.458206] __x64_sys_ioctl+0x93/0xd0 [ 3437.458498] do_syscall_64+0x42/0xf0 [ 3437.458779] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.459155] -> #2 (&c->snapshot_create_lock){++++}-{3:3}: [ 3437.459615] down_read+0x3e/0x170 [ 3437.459878] bch2_truncate+0x82/0x110 [bcachefs] [ 3437.460276] bchfs_truncate+0x254/0x3c0 [bcachefs] [ 3437.460686] notify_change+0x1f1/0x4a0 [ 3437.461283] do_truncate+0x7f/0xd0 [ 3437.461555] path_openat+0xa57/0xce0 [ 3437.461836] do_filp_open+0xb4/0x160 [ 3437.462116] do_sys_openat2+0x91/0xc0 [ 3437.462402] __x64_sys_openat+0x53/0xa0 [ 3437.462701] do_syscall_64+0x42/0xf0 [ 3437.462982] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.463359] -> #1 (&sb->s_type->i_mutex_key#15){+.+.}-{3:3}: [ 3437.463843] down_write+0x3b/0xc0 [ 3437.464223] bch2_write_iter+0x5b/0xcc0 [bcachefs] [ 3437.464493] vfs_write+0x21b/0x4c0 [ 3437.464653] ksys_write+0x69/0xf0 [ 3437.464839] do_syscall_64+0x42/0xf0 [ 3437.465009] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.465231] -> #0 (sb_writers#10){.+.+}-{0:0}: [ 3437.465471] __lock_acquire+0x1455/0x21b0 [ 3437.465656] lock_acquire+0xc6/0x2b0 [ 3437.465822] mnt_want_write+0x46/0x1a0 [ 3437.465996] filename_create+0x62/0x190 [ 3437.466175] user_path_create+0x2d/0x50 [ 3437.466352] bch2_fs_file_ioctl+0x2ec/0xc90 [bcachefs] [ 3437.466617] __x64_sys_ioctl+0x93/0xd0 [ 3437.466791] do_syscall_64+0x42/0xf0 [ 3437.466957] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.467180] other info that might help us debug this: [ 3437.469670] 2 locks held by bcachefs/35533: other info that might help us debug this: [ 3437.467507] Chain exists of: sb_writers#10 --> &c->snapshot_create_lock --> &type->s_umount_key#48 [ 3437.467979] Possible unsafe locking scenario: [ 3437.468223] CPU0 CPU1 [ 3437.468405] ---- ---- [ 3437.468585] rlock(&type->s_umount_key#48); [ 3437.468758] lock(&c->snapshot_create_lock); [ 3437.469030] lock(&type->s_umount_key#48); [ 3437.469291] rlock(sb_writers#10); [ 3437.469434] *** DEADLOCK *** [ 3437.469670] 2 locks held by bcachefs/35533: [ 3437.469838] #0: ffffa0a02ce00a88 (&c->snapshot_create_lock){++++}-{3:3}, at: bch2_fs_file_ioctl+0x1e3/0xc90 [bcachefs] [ 3437.470294] #1: ffffa0a02b2b10e0 (&type->s_umount_key#48){.+.+}-{3:3}, at: bch2_fs_file_ioctl+0x232/0xc90 [bcachefs] [ 3437.470744] stack backtrace: [ 3437.470922] CPU: 7 PID: 35533 Comm: bcachefs Kdump: loaded Tainted: G E 6.7.0-rc7-custom+ #85 [ 3437.471313] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 [ 3437.471694] Call Trace: [ 3437.471795] <TASK> [ 3437.471884] dump_stack_lvl+0x57/0x90 [ 3437.472035] check_noncircular+0x132/0x150 [ 3437.472202] __lock_acquire+0x1455/0x21b0 [ 3437.472369] lock_acquire+0xc6/0x2b0 [ 3437.472518] ? filename_create+0x62/0x190 [ 3437.472683] ? lock_is_held_type+0x97/0x110 [ 3437.472856] mnt_want_write+0x46/0x1a0 [ 3437.473025] ? filename_create+0x62/0x190 [ 3437.473204] filename_create+0x62/0x190 [ 3437.473380] user_path_create+0x2d/0x50 [ 3437.473555] bch2_fs_file_ioctl+0x2ec/0xc90 [bcachefs] [ 3437.473819] ? lock_acquire+0xc6/0x2b0 [ 3437.474002] ? __fget_files+0x2a/0x190 [ 3437.474195] ? __fget_files+0xbc/0x190 [ 3437.474380] ? lock_release+0xc5/0x270 [ 3437.474567] ? __x64_sys_ioctl+0x93/0xd0 [ 3437.474764] ? __pfx_bch2_fs_file_ioctl+0x10/0x10 [bcachefs] [ 3437.475090] __x64_sys_ioctl+0x93/0xd0 [ 3437.475277] do_syscall_64+0x42/0xf0 [ 3437.475454] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.475691] RIP: 0033:0x7f2743c313af ====================================================== In __bch2_ioctl_subvolume_create(), we grab s_umount unconditionally and unlock it at the end of the function. There is a comment "why do we need this lock?" about the lock coming from commit 42d23732 ("bcachefs: Snapshot creation, deletion") The reason is that __bch2_ioctl_subvolume_create() calls sync_inodes_sb() which enforce locked s_umount to writeback all dirty nodes before doing snapshot works. Fix it by read locking s_umount for snapshotting only and unlocking s_umount after sync_inodes_sb(). Signed-off-by:Su Yue <glass.su@suse.com> Signed-off-by:
-
Su Yue authored
bch_fs::snapshots is allocated by kvzalloc in __snapshot_t_mut. It should be freed by kvfree not kfree. Or umount will triger: [ 406.829178 ] BUG: unable to handle page fault for address: ffffe7b487148008 [ 406.830676 ] #PF: supervisor read access in kernel mode [ 406.831643 ] #PF: error_code(0x0000) - not-present page [ 406.832487 ] PGD 0 P4D 0 [ 406.832898 ] Oops: 0000 [#1] PREEMPT SMP PTI [ 406.833512 ] CPU: 2 PID: 1754 Comm: umount Kdump: loaded Tainted: G OE 6.7.0-rc7-custom+ #90 [ 406.834746 ] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 [ 406.835796 ] RIP: 0010:kfree+0x62/0x140 [ 406.836197 ] Code: 80 48 01 d8 0f 82 e9 00 00 00 48 c7 c2 00 00 00 80 48 2b 15 78 9f 1f 01 48 01 d0 48 c1 e8 0c 48 c1 e0 06 48 03 05 56 9f 1f 01 <48> 8b 50 08 48 89 c7 f6 c2 01 0f 85 b0 00 00 00 66 90 48 8b 07 f6 [ 406.837810 ] RSP: 0018:ffffb9d641607e48 EFLAGS: 00010286 [ 406.838213 ] RAX: ffffe7b487148000 RBX: ffffb9d645200000 RCX: ffffb9d641607dc4 [ 406.838738 ] RDX: 000065bb00000000 RSI: ffffffffc0d88b84 RDI: ffffb9d645200000 [ 406.839217 ] RBP: ffff9a4625d00068 R08: 0000000000000001 R09: 0000000000000001 [ 406.839650 ] R10: 0000000000000001 R11: 000000000000001f R12: ffff9a4625d4da80 [ 406.840055 ] R13: ffff9a4625d00000 R14: ffffffffc0e2eb20 R15: 0000000000000000 [ 406.840451 ] FS: 00007f0a264ffb80(0000) GS:ffff9a4e2d500000(0000) knlGS:0000000000000000 [ 406.840851 ] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 406.841125 ] CR2: ffffe7b487148008 CR3: 000000018c4d2000 CR4: 00000000000006f0 [ 406.841464 ] Call Trace: [ 406.841583 ] <TASK> [ 406.841682 ] ? __die+0x1f/0x70 [ 406.841828 ] ? page_fault_oops+0x159/0x470 [ 406.842014 ] ? fixup_exception+0x22/0x310 [ 406.842198 ] ? exc_page_fault+0x1ed/0x200 [ 406.842382 ] ? asm_exc_page_fault+0x22/0x30 [ 406.842574 ] ? bch2_fs_release+0x54/0x280 [bcachefs] [ 406.842842 ] ? kfree+0x62/0x140 [ 406.842988 ] ? kfree+0x104/0x140 [ 406.843138 ] bch2_fs_release+0x54/0x280 [bcachefs] [ 406.843390 ] kobject_put+0xb7/0x170 [ 406.843552 ] deactivate_locked_super+0x2f/0xa0 [ 406.843756 ] cleanup_mnt+0xba/0x150 [ 406.843917 ] task_work_run+0x59/0xa0 [ 406.844083 ] exit_to_user_mode_prepare+0x197/0x1a0 [ 406.844302 ] syscall_exit_to_user_mode+0x16/0x40 [ 406.844510 ] do_syscall_64+0x4e/0xf0 [ 406.844675 ] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 406.844907 ] RIP: 0033:0x7f0a2664e4fb Signed-off-by:
Brian Foster <bfoster@redhat.com> Signed-off-by:
-
Kent Overstreet authored
Fixes: 023f9ac9 bcachefs: Delete dio read alignment check Reported-by:
-
Colin Ian King authored
The variable tmp is being assigned a value but it isn't being read afterwards. The assignment is redundant and so tmp can be removed. Cleans up clang scan build warning: warning: Although the value stored to 'ret' is used in the enclosing expression, the value is never actually read from 'ret' [deadcode.DeadStores] Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Reviewed-by:
-
Kent Overstreet authored
Signed-off-by:
-
