- 28 Oct, 2017 10 commits
-
-
Kees Cook authored
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Santosh Raspatur <santosh@chelsio.com> Cc: Ganesh Goudar <ganeshgr@chelsio.com> Cc: Casey Leedom <leedom@chelsio.com> Cc: netdev@vger.kernel.org Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kees Cook authored
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Allen Pais <allen.lkml@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: David Howells <dhowells@redhat.com> Cc: netdev@vger.kernel.org Signed-off-by:
-
Kees Cook authored
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Allen Pais <allen.lkml@gmail.com> Cc: netdev@vger.kernel.org Signed-off-by:
-
Kees Cook authored
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: netdev@vger.kernel.org Signed-off-by:
-
Gustavo A. R. Silva authored
make use of the swap macro and remove unnecessary variable tmp_addr. This makes the code easier to read and maintain. This code was detected with the help of Coccinelle. Signed-off-by:
Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by:
-
Bhadram Varka authored
Currently stmmac driver not copying the valid ethernet MAC address to MAC registers. This patch takes care of updating the MAC register with MAC address. Signed-off-by:
Bhadram Varka <vbhadram@nvidia.com> Signed-off-by:
-
Pablo Cascón authored
Add message to inform the VF MAC was changed and the need to restart the VF driver for the changes to be effective. Signed-off-by:
Pablo Cascón <pablo.cascon@netronome.com> Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Felix Manlunas authored
Doing ifconfig down on VF driver in the middle of receiving line rate traffic causes a kernel panic: LiquidIO_VF 0000:02:00.3: should not come here should not get rx when poll mode = 0 for vf BUG: unable to handle kernel NULL pointer dereference at (null) . . . Call Trace: <IRQ> ? tasklet_action+0x102/0x120 __do_softirq+0x91/0x292 irq_exit+0xb6/0xc0 do_IRQ+0x4f/0xd0 common_interrupt+0x93/0x93 </IRQ> RIP: 0010:cpuidle_enter_state+0x142/0x2f0 RSP: 0018:ffffffffa6403e20 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff59 RAX: 0000000000000000 RBX: 0000000000000003 RCX: 000000000000001f RDX: 0000000000000000 RSI: 000000002ab7519f RDI: 0000000000000000 RBP: ffffffffa6403e58 R08: 0000000000000084 R09: 0000000000000018 R10: ffffffffa6403df0 R11: 00000000000003c7 R12: 0000000000000003 R13: ffffd27ebd806800 R14: ffffffffa64d40d8 R15: 0000007be072823f cpuidle_enter+0x17/0x20 call_cpuidle+0x23/0x40 do_idle+0x18c/0x1f0 cpu_startup_entry+0x64/0x70 rest_init+0xa5/0xb0 start_kernel+0x45e/0x46b x86_64_start_reservations+0x24/0x26 x86_64_start_kernel+0x6f/0x72 secondary_startup_64+0xa5/0xa5 Code: Bad RIP value. RIP: (null) RSP: ffff9246ed003f28 CR2: 0000000000000000 ---[ end trace 92731e80f31b7d7d ]--- Kernel panic - not syncing: Fatal exception in interrupt Kernel Offset: 0x24000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception in interrupt Reason is: in the function assigned to net_device_ops->ndo_stop, the steps for bringing down the interface are done in the wrong order. The step that notifies the NIC firmware to stop forwarding packets to host is done too late. Fix it by moving that step to the beginning. Signed-off-by:Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by:
Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by:
-
Vivien Didelot authored
The new bindings (dsa2.c) and the old bindings (legacy.c) share two helpers dsa_cpu_dsa_setup and dsa_cpu_dsa_destroy, used to register or deregister a fixed PHY if a given port has a corresponding device node. Unclutter the code by moving them into two new port.c helpers, dsa_port_fixed_link_register_of and dsa_port_fixed_link_(un)register_of. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
-
Michael Chan authored
Fix undefined symbols when CONFIG_VLAN_8021Q or CONFIG_INET is not set. Fixes: 8c95f773 ("bnxt_en: add support for Flower based vxlan encap/decap offload") Reported-by:
Jakub Kicinski <kubakici@wp.pl> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
- 27 Oct, 2017 30 commits
-
-
Intiyaz Basha authored
Defer ringing the Tx doorbell if skb->xmit_more is set unless the Tx queue is full or stopped. To keep latency low, use a deferral limit of 8 packets. We chose 8 because Octeon can fetch at most 8 packets in a single PCI read, and our tests show that 8 results in low latency. Signed-off-by:
Intiyaz Basha <intiyaz.basha@cavium.com> Signed-off-by:
Satanand Burla <satananda.burla@cavium.com> Signed-off-by:
-
David S. Miller authored
John Allen says: ==================== ibmvnic: Tunable parameter support This series implements support for changing tunable parameters such as the mtu, number of tx/rx queues, and number of buffers per queue via ethtool and ifconfig. v2: -Fix conflict with Tom's recently applied TSO/SG patches v3: -Initialize rc in __ibmvnic_reset fixing build warning -Fix buggy behavior with pending mac changes. Use boolean flag to track if mac change is needed on open rather than relying on the desired->mac pointer. -Directly include tunable structs in the adapter struct rather than keeping pointers, eliminating the need to directly allocate them. ==================== Signed-off-by: -
John Allen authored
For all non-fatal reset conditions, the hypervisor will send a failover when we attempt to initialize the crq and the vnic client is expected to handle that failover instead of the existing non-fatal reset. To handle this, we need to return from init with a return code that indicates that we have hit this case. Signed-off-by:
John Allen <jallen@linux.vnet.ibm.com> Signed-off-by:
-
John Allen authored
Update ibmvnic reset infrastructure to include a new reset option that will allow changing of tunable parameters. There currently is no way to request different capabilities from the vnic server on the fly so this patch achieves this by resetting the driver and attempting to log in with the requested changes. If the reset operation fails, the old values of the tunable parameters are stored in the "fallback" struct and we attempt to login with the fallback values. Signed-off-by:
-
David S. Miller authored
Subash Abhinov Kasiviswanathan says: ==================== net: qualcomm: rmnet: Add 64 bit stats and GRO This series adds support for 64 bit per cpu stats and GRO Patches 1-2 are cleanups of return code and a redundant condition Patch 3 adds support for 64 bit per cpu stats Patch 4 adds support for GRO using GRO cells v1->v2: Since gro_cells_init() could potentially fail, move it from device setup to ndo_init() as mentioned by Eric. ==================== Signed-off-by: -
Subash Abhinov Kasiviswanathan authored
Add gro_cells so that rmnet devices can call gro_cells_receive instead of netif_receive_skb. Signed-off-by:
Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Subash Abhinov Kasiviswanathan authored
Implement 64 bit per cpu stats. Signed-off-by:
-
Subash Abhinov Kasiviswanathan authored
The rmnet device needs to assigned for all packets in the deaggregation path based on the mux id, so the check is not needed. Signed-off-by:
-
Subash Abhinov Kasiviswanathan authored
Since packet is always consumed by rmnet_rx_handler(), we always return RX_HANDLER_CONSUMED. There is no need to pass on this value through multiple functions. Signed-off-by:
-
Florian Fainelli authored
Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
David S. Miller authored
Michael Chan says: ==================== bnxt_en: Updates for net-next. This series includes firmware interface update, some optimizations, some new PCI IDs, new MTU checks, ethtool reset method, interrupt coalescing code cleanup, and TC flower offload for vxlan encap/decap from Sathya Perla. ==================== Signed-off-by: -
Sathya Perla authored
TC flower is not enabled on VFs and when there's no FW support. Alloc the tc_info{} struct at init time only when TC flower is being enabled. Signed-off-by:Sathya Perla <sathya.perla@broadcom.com> Signed-off-by:
-
Sathya Perla authored
This patch implements periodic querying of cfa flow stats in batches to compute the 'lastused' attribute of TC flow stats. Signed-off-by:
-
Sathya Perla authored
Add routines for issuing the hwrm_cfa_encap_record_alloc/free and hwrm_cfa_decap_filter_alloc/free FW cmds needed for supporting vxlan encap/decap offload. Signed-off-by:
-
Sathya Perla authored
This patch adds IPv4 vxlan encap/decap action support to TC-flower offload. For vxlan encap, the driver maintains a tunnel encap hash-table. When a new flow with a tunnel encap action arrives, this table is looked up; if an encap entry exists, it uses the already programmed encap_record_handle as the tunnel_handle in the hwrm_cfa_flow_alloc cmd. Else, a new encap node is added and the L2 header fields are queried via a route lookup. hwrm_cfa_encap_record_alloc cmd is used to create a new encap record and the encap_record_handle is used as the tunnel_handle while adding the flow. For vxlan decap, the driver maintains a tunnel decap hash-table. When a new flow with a tunnel decap action arrives, this table is looked up; if a decap entry exists, it uses the already programmed decap_filter_handle as the tunnel_handle in the hwrm_cfa_flow_alloc cmd. Else, a new decap node is added and a decap_filter_handle is alloc'd via the hwrm_cfa_decap_filter_alloc cmd. This handle is used as the tunnel_handle while adding the flow. The code to issue the HWRM FW cmds is introduced in a follow-up patch. Signed-off-by:
-
Michael Chan authored
The mapping of the ethtool coalescing parameters to hardware parameters is now done in bnxt_hwrm_set_coal_params(). The same function can handle both RX and TX settings. The code is now more clear. Some adjustments have been made to get better hardware settings. The coal_frames setting is now accurately set in hardware. The max_timer is set to coal_ticks value. Signed-off-by:
-
Michael Chan authored
The current IRQ coalescing logic is a little messy. The ethtool parameters are mapped to hardware parameters in a way that is difficult to understand. The first step is to better organize the parameters by adding the new structure bnxt_coal. The structure is used by both the RX and TX sets of coalescing parameters. Adjust the default coal_ticks to 14 us and 28 us for RX and TX. Signed-off-by:
-
Vasundhara Volam authored
This is a firmware internal reset after driver is unloaded. Signed-off-by:
Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by:
-
Michael Chan authored
Some NICs have a firmware enforced maximum MTU setting by management firmware. Set up netdev->max_mtu accordingly. Signed-off-by:
-
Michael Chan authored
No need to call bnxt_approve_mac() which will send a message to the PF if the MAC address hasn't changed. Signed-off-by:
-
Michael Chan authored
The current code retrieves the firmware package version from firmware everytime ethtool -i is run. There is no reason to do that as the firmware will not change while the driver is loaded. Get the version once at init time. Also, display the full 4-part firmware version string and remove the less useful interface spec version. Signed-off-by:
-
Michael Chan authored
Return -EINVAL if the length is zero and not proceed to do essentially nothing. Signed-off-by:
-
Rob Miller authored
Signed-off-by:
Rob Miller <rmiller@broadcom.com> Signed-off-by:
-
Ray Jui authored
Add new PCIe device ID and chip number for bcm58804 Signed-off-by:
Ray Jui <ray.jui@broadcom.com> Signed-off-by:
-
Michael Chan authored
Vxlan encap/decap filters are added to this firmware spec. Signed-off-by:
-
David S. Miller authored
Vivien Didelot says: ==================== net: dsa: define port types The DSA code currently has 3 bitmaps in the dsa_switch structure: cpu_port_mask, dsa_port_mask and enabled_port_mask. They are used to store the type of each switch port. This dates back from when DSA didn't have a dsa_port structure to hold port-specific data. The dsa_switch structure is mainly used to communicate with DSA drivers and must not contain such static data parsed from DTS or pdata, which belongs the DSA core structures, such as dsa_switch_tree and dsa_port. Also the enabled_port_mask is misleading, often misinterpreted as the complement of disabled ports (thus including DSA and CPU ports), while in fact it only masks the user ports. A port can be of 3 types when it is not unused: "cpu" (interfacing with a master device), "dsa" (interconnecting with another "dsa" port from another switch chip), or "user" (user-facing port.) This patchset first fixes the usage of DSA port type helpers, then defines the DSA_PORT_TYPE_UNUSED, DSA_PORT_TYPE_CPU, DSA_PORT_TYPE_DSA, and DSA_PORT_TYPE_USER port types, and finally removes the misleading port bitmaps. ==================== Signed-off-by: -
Vivien Didelot authored
Now that DSA core provides port types, there is no need to keep this information at the switch level. This is a static information that is part of a DSA core dsa_port structure. Remove them. Signed-off-by:
-
Vivien Didelot authored
Now that DSA exposes an enumerated type for the ports, we can use them directly instead of checking bitmaps, which is more consistent. Signed-off-by:
-
Vivien Didelot authored
Introduce an enumerated type for ports, which will be way more explicit to identify a port type instead of digging into switch port masks. A port can be of type CPU, DSA, user, or unused by default. This is a static parsed information that cannot be changed at runtime. Signed-off-by:
-
Vivien Didelot authored
Introduce a dsa_user_ports() helper to return the ds->enabled_port_mask mask which is more explicit. This will also minimize diffs when touching this internal mask. Signed-off-by:
-
