There are cases where remote that is acking mailbox message can take longer
than the default tx_poll_period value. Therefore, enable this to be mutable.

Added tx_poll_period field while inserting the module to set the
poll period for ack after sending mailbox message.
Signed-off-by: Ben Levinsky <ben.levinsky@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>

This newly added driver fails compile testing on 32-bit architectures
because it relies on 64-bit MMIO register access:

drivers/mailbox/qcom-cpucp-mbox.c: In function 'qcom_cpucp_mbox_irq_fn':
drivers/mailbox/qcom-cpucp-mbox.c:54:18: error: implicit declaration of function 'readq'; did you mean 'readb'? [-Wimplicit-function-declaration]
   54 |         status = readq(cpucp->rx_base + APSS_CPUCP_RX_MBOX_STAT);
      |                  ^~~~~
      |                  readb
drivers/mailbox/qcom-cpucp-mbox.c:65:17: error: implicit declaration of function 'writeq'; did you mean 'writeb'? [-Wimplicit-function-declaration]
   65 |                 writeq(BIT(i), cpucp->rx_base + APSS_CPUCP_RX_MBOX_CLEAR);
      |                 ^~~~~~
      |                 writeb

Change the Kconfig dependency to disallow that configuration as well.

Fixes: 0e2a9a03 ("mailbox: Add support for QTI CPUCP mailbox controller")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>

Add support for CPUSS Control Processor (CPUCP) mailbox controller,
this driver enables communication between AP and CPUCP by acting as
a doorbell between them.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>

Add devicetree binding for CPUSS Control Processor (CPUCP) mailbox
controller.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>

Document the components used to boot the ADSP, CDSP0, CDSP1, GPDSP0 and
GPDSP1 on the SA8775p SoC.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>

make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/mailbox/mtk-cmdq-mailbox.o

Add the missing invocation of the MODULE_DESCRIPTION() macro.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>

'pdf_dma_map' has been unused since the original
commit a24532f8 ("mailbox: Add Broadcom PDC mailbox driver").

Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>

Two TXDB_V2 channels are used between Linux and System Manager(SM).
Channel0 for normal TX, Channel 1 for notification completion.
The TXDB_V2 trigger logic is using imx_mu_xcr_rmw which uses
read/modify/update logic.

Note: clear MUB GSR BITs, the MUA side GCR BITs will also got cleared per
hardware design.
Channel0 Linux
read GCR->modify GCR->write GCR->M33 SM->read GSR----->clear GSR
                                                |-(1)-|
Channel1 Linux start in time slot(1)
read GCR->modify GCR->write GCR->M33 SM->read GSR->clear GSR
So Channel1 read GCR will read back the GCR that Channel0 wrote, because
M33 has not finish clear GSR, this means Channel1 GCR writing will
trigger Channel1 and Channel0 interrupt both which is wrong.

Channel0 will be freed(SCMI channel status set to FREE) in M33 SM when
processing the 1st Channel0 interrupt. So when 2nd interrupt trigger
(channel 0/1 trigger together), SM will see a freed Channel0, and report
protocol error.

To address the issue, not using read/modify/update logic, just use
write, because write 0 to GCR will be ignored. And after write MUA GCR,
wait the SM to clear MUB GSR by looping MUA GCR value.

Fixes: 5bfe4067 ("mailbox: imx: support channel type tx doorbell v2")
Reviewed-by: Ranjani Vaidyanathan <ranjani.vaidyanathan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>

Multiple mailbox users can share one interrupt line. This flag was
mistakenly dropped as part of the FIFO removal. Mark the IRQ as shared.
Reported-by: Beleswar Padhi <b-padhi@ti.com>
Fixes: 3f58c1f4 ("mailbox: omap: Remove kernel FIFO message queuing")
Signed-off-by: Andrew Davis <afd@ti.com>
Tested-by: Beleswar Padhi <b-padhi@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>

Now that the clock probing code uses devm_kasprintf(), there is
no more restriction on the number of GCEs: dynamically allocate
the clk_bulk_data clocks array to improve flexibility and also
to get a slight memory saving on platforms featuring only one
CMDQ mailbox (and consequently only one Global Command Engine).
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>

Move the clocks probe to a new cmdq_get_clocks() function; while
at it, partially refactor the code:

Drop the clk_names[] array and assign clock names to the array
of clk_bulk_data with devm_kasprintf() instead, slightly reduce
the indentation for the multi-gce clock probe path and add a
comment describing the reason why we get clocks of other GCE
instance instead of just the clock from the one that it is
getting probed.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>

The Global Command Engine mailbox has only one clock hence
requiring clock-names is useless.

Get the first (and only) clock instead, without name checks.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>

Add mediatek,gce-props.yaml for common GCE properties that is used for
both mailbox providers and consumers. We place the common property
"mediatek,gce-events" in this binding currently.

The property "mediatek,gce-events" is used for GCE event ID corresponding
to a hardware event signal sent by the hardware or a software driver.
If the mailbox providers or consumers want to manipulate the value of
the event ID, they need to know the specific event ID.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>

Pull clk fixes from Stephen Boyd:
 "A set of clk fixes for the Qualcomm, Mediatek, and Allwinner drivers:

   - Fix the Qualcomm Stromer Plus PLL set_rate() clk_op to explicitly
     set the alpha enable bit and not set bits that don't exist

   - Mark Qualcomm IPQ9574 crypto clks as voted to avoid stuck clk
     warnings

   - Fix the parent of some PLLs on Qualcomm sm6530 so their rate is
     correct

   - Fix the min/max rate clamping logic in the Allwinner driver that
     got broken in v6.9

   - Limit runtime PM enabling in the Mediatek driver to only
     mt8183-mfgcfg so that system wide resume doesn't break on other
     Mediatek SoCs"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: mediatek: mt8183: Only enable runtime PM on mt8183-mfgcfg
  clk: sunxi-ng: common: Don't call hw_to_ccu_common on hw without common
  clk: qcom: gcc-ipq9574: Add BRANCH_HALT_VOTED flag
  clk: qcom: apss-ipq-pll: remove 'config_ctl_hi_val' from Stromer pll configs
  clk: qcom: clk-alpha-pll: set ALPHA_EN bit for Stromer Plus PLLs
  clk: qcom: gcc-sm6350: Fix gpll6* & gpll7 parents

Pull powerpc fixes from Michael Ellerman:

 - Fix unnecessary copy to 0 when kernel is booted at address 0

 - Fix usercopy crash when dumping dtl via debugfs

 - Avoid possible crash when PCI hotplug races with error handling

 - Fix kexec crash caused by scv being disabled before other CPUs
   call-in

 - Fix powerpc selftests build with USERCFLAGS set

Thanks to Anjali K, Ganesh Goudar, Gautam Menghani, Jinglin Wen,
Nicholas Piggin, Sourabh Jain, Srikar Dronamraju, and Vishal Chourasia.

* tag 'powerpc-6.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  selftests/powerpc: Fix build with USERCFLAGS set
  powerpc/pseries: Fix scv instruction crash with kexec
  powerpc/eeh: avoid possible crash when edev->pdev changes
  powerpc/pseries: Whitelist dtl slub object for copying to userspace
  powerpc/64s: Fix unnecessary copy to 0 when kernel is booted at address 0

Pull smb client fix from Steve French:
 "Fix for smb3 readahead performance regression"

* tag '6.10-rc6-smb3-client-fix' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Fix read-performance regression by dropping readahead expansion

Pull i2c fix from Wolfram Sang:
 "An i2c driver fix"

* tag 'i2c-for-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: pnx: Fix potential deadlock warning from del_timer_sync() call in isr

Currently building the powerpc selftests with USERCFLAGS set to anything
causes the build to break:

  $ make -C tools/testing/selftests/powerpc V=1 USERCFLAGS=-Wno-error
  ...
  gcc -Wno-error    cache_shape.c ...
  cache_shape.c:18:10: fatal error: utils.h: No such file or directory
     18 | #include "utils.h"
        |          ^~~~~~~~~
  compilation terminated.

This happens because the USERCFLAGS are added to CFLAGS in lib.mk, which
causes the check of CFLAGS in powerpc/flags.mk to skip setting CFLAGS at
all, resulting in none of the usual CFLAGS being passed. That can
be seen in the output above, the only flag passed to the compiler is
-Wno-error.

Fix it by dropping the conditional setting of CFLAGS in flags.mk.
Instead always set CFLAGS, but also append USERCFLAGS if they are set.

Note that appending to CFLAGS (with +=) wouldn't work, because flags.mk
is included by multiple Makefiles (to support partial builds), causing
CFLAGS to be appended to multiple times. Additionally that would place
the USERCFLAGS prior to the standard CFLAGS, meaning the USERCFLAGS
couldn't override the standard flags. Being able to override the
standard flags is desirable, for example for adding -Wno-error.

With the fix in place, the CFLAGS are set correctly, including the
USERCFLAGS:

  $ make -C tools/testing/selftests/powerpc V=1 USERCFLAGS=-Wno-error
  ...
  gcc -std=gnu99 -O2 -Wall -Werror -DGIT_VERSION='"v6.10-rc2-7-gdea17e7e56c3"'
  -I/home/michael/linux/tools/testing/selftests/powerpc/include -Wno-error
  cache_shape.c ...

Fixes: 5553a793 ("selftests/powerpc: Add flags.mk to support pmu buildable")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240706120833.909853-1-mpe@ellerman.id.au

Merge tag 'integrity-v6.10-fix' of ssh://ra.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity

Pull integrity fix from Mimi Zohar:
 "A single bug fix to properly remove all of the securityfs IMA
  measurement lists"

* tag 'integrity-v6.10-fix' of ssh://ra.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
  ima: fix wrong zero-assignment during securityfs dentry remove

Pull pci update from Bjorn Helgaas:

 - Update MAINTAINERS and CREDITS to credit Gustavo Pimentel with the
   Synopsys DesignWare eDMA driver and reflect that he is no longer at
   Synopsys and isn't in a position to maintain the DesignWare xData
   traffic generator (Bjorn Helgaas)

* tag 'pci-v6.10-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
  CREDITS: Add Synopsys DesignWare eDMA driver for Gustavo Pimentel
  MAINTAINERS: Orphan Synopsys DesignWare xData traffic generator

Pull RISC-V fixes from Palmer Dabbelt:

 - A fix for the CMODX example in the recently added icache flushing
   prctl()

 - A fix to the perf driver to avoid corrupting event data on counter
   overflows when external overflow handlers are in use

 - A fix to clear all hardware performance monitor events on boot, to
   avoid dangling events firmware or previously booted kernels from
   triggering spuriously

 - A fix to the perf event probing logic to avoid erroneously reporting
   the presence of unimplemented counters. This also prevents some
   implemented counters from being reported

 - A build fix for the vector sigreturn selftest on clang

 - A fix to ftrace, which now requires the previously optional index
   argument to ftrace_graph_ret_addr()

 - A fix to avoid deadlocking if kexec crash handling triggers in an
   interrupt context

* tag 'riscv-for-linus-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: kexec: Avoid deadlock in kexec crash path
  riscv: stacktrace: fix usage of ftrace_graph_ret_addr()
  riscv: selftests: Fix vsetivli args for clang
  perf: RISC-V: Check standard event availability
  drivers/perf: riscv: Reset the counter to hpmevent mapping while starting cpus
  drivers/perf: riscv: Do not update the event data if uptodate
  documentation: Fix riscv cmodx example

Pull drm fixes from Daniel Vetter:
 "Just small fixes all over here, all quiet as it should.

  drivers:

   - amd: mostly amdgpu display fixes + radeon vm NULL deref fix

   - xe: migration error handling + typoed register name in gt setup

   - i915: usb-c fix to shut up warnings on MTL+

   - panthor: fix sync-only jobs + ioctl validation fix to not EINVAL
     wrongly

   - panel quirks

   - nouveau: NULL deref in get_modes

  drm core:

   - fbdev big endian fix for the dma memory backed variant

  drivers/firmware:

   - fix sysfb refcounting"

* tag 'drm-fixes-2024-07-05' of https://gitlab.freedesktop.org/drm/kernel:
  drm/xe/mcr: Avoid clobbering DSS steering
  drm/xe: fix error handling in xe_migrate_update_pgtables
  drm/ttm: Always take the bo delayed cleanup path for imported bos
  drm/fbdev-generic: Fix framebuffer on big endian devices
  drm/panthor: Fix sync-only jobs
  drm/panthor: Don't check the array stride on empty uobj arrays
  drm/amdgpu/atomfirmware: silence UBSAN warning
  drm/radeon: check bo_va->bo is non-NULL before using it
  drm/amd/display: Fix array-index-out-of-bounds in dml2/FCLKChangeSupport
  drm/amd/display: Update efficiency bandwidth for dcn351
  drm/amd/display: Fix refresh rate range for some panel
  drm/amd/display: Account for cursor prefetch BW in DML1 mode support
  drm/amd/display: Add refresh rate range check
  drm/amd/display: Reset freesync config before update new state
  drm: panel-orientation-quirks: Add labels for both Valve Steam Deck revisions
  drm: panel-orientation-quirks: Add quirk for Valve Galileo
  drm/i915/display: For MTL+ platforms skip mg dp programming
  drm/nouveau: fix null pointer dereference in nouveau_connector_get_modes
  firmware: sysfb: Fix reference count of sysfb parent device

Pull gpio fixes from Bartosz Golaszewski:
 "Two OF lookup quirks and one fix for an issue in the generic gpio-mmio
  driver:

   - add two OF lookup quirks for TSC2005 and MIPS Lantiq

   - don't try to figure out bgpio_bits from the 'ngpios' property in
     gpio-mmio"

* tag 'gpio-fixes-for-v6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpiolib: of: add polarity quirk for TSC2005
  gpio: mmio: do not calculate bgpio_bits via "ngpios"
  gpiolib: of: fix lookup quirk for MIPS Lantiq

Pull TPM fixes from Jarkko Sakkinen:
 "This contains the fixes for !chip->auth condition, preventing the
  breakage of:
   - tpm_ftpm_tee.c
   - tpm_i2c_nuvoton.c
   - tpm_ibmvtpm.c
   - tpm_tis_i2c_cr50.c
   - tpm_vtpm_proxy.c

  All drivers will continue to work as they did in 6.9, except a single
  warning (dev_warn() not WARN()) is printed to klog only to inform that
  authenticated sessions are not enabled"

* tag 'tpmdd-next-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  tpm: Address !chip->auth in tpm_buf_append_hmac_session*()
  tpm: Address !chip->auth in tpm_buf_append_name()
  tpm: Address !chip->auth in tpm2_*_auth_session()

Pull kvm fix from Paolo Bonzini:

 - s390: fix support for z16 systems

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: s390: fix LPSWEY handling

Merge tag 'i2c-host-fixes-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current

This tag includes a nice fix in the PNX driver that has been
pending for a long time. Piotr has replaced a potential lock in
the interrupt context with a more efficient and straightforward
handling of the timeout signaling.

Merge tag 'amd-drm-fixes-6.10-2024-07-03' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.10-2024-07-03:

amdgpu:
- Freesync fixes
- DML1 bandwidth fix
- DCN 3.5 fixes
- DML2 fix
- Silence an UBSAN warning

radeon:
- GPUVM fix
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240703184723.1981997-1-alexander.deucher@amd.com

DTS for Nokia N900 incorrectly specifies "active high" polarity for
the reset line, while the chip documentation actually specifies it as
"active low".  In the past the driver fudged gpiod API and inverted
the logic internally, but it was changed in d0d89493.

Fixes: d0d89493 ("Input: tsc2004/5 - switch to using generic device properties")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/ZoWXwYtwgJIxi-hD@google.comSigned-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Merge tag 'kvm-s390-master-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

KVM: s390: Fix z16 support

The z16 support might fail with the lpswey instruction. Provide a
handler.

Unless tpm_chip_bootstrap() was called by the driver, !chip->auth can
cause a null derefence in tpm_buf_hmac_session*().  Thus, address
!chip->auth in tpm_buf_hmac_session*() and remove the fallback
implementation for !TCG_TPM2_HMAC.

Cc: stable@vger.kernel.org # v6.9+
Reported-by: Stefan Berger <stefanb@linux.ibm.com>
Closes: https://lore.kernel.org/linux-integrity/20240617193408.1234365-1-stefanb@linux.ibm.com/
Fixes: 1085b827 ("tpm: Add the rest of the session HMAC API")
Tested-by: Michael Ellerman <mpe@ellerman.id.au> # ppc
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

Unless tpm_chip_bootstrap() was called by the driver, !chip->auth can
cause a null derefence in tpm_buf_append_name().  Thus, address
!chip->auth in tpm_buf_append_name() and remove the fallback
implementation for !TCG_TPM2_HMAC.

Cc: stable@vger.kernel.org # v6.10+
Reported-by: Stefan Berger <stefanb@linux.ibm.com>
Closes: https://lore.kernel.org/linux-integrity/20240617193408.1234365-1-stefanb@linux.ibm.com/
Fixes: d0a25bb9 ("tpm: Add HMAC session name/handle append")
Tested-by: Michael Ellerman <mpe@ellerman.id.au> # ppc
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

Unless tpm_chip_bootstrap() was called by the driver, !chip->auth can cause
a null derefence in tpm2_*_auth_session(). Thus, address !chip->auth in
tpm2_*_auth_session().

Cc: stable@vger.kernel.org # v6.9+
Reported-by: Stefan Berger <stefanb@linux.ibm.com>
Closes: https://lore.kernel.org/linux-integrity/20240617193408.1234365-1-stefanb@linux.ibm.com/
Fixes: 699e3efd ("tpm: Add HMAC session start and end functions")
Tested-by: Michael Ellerman <mpe@ellerman.id.au> # ppc
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

Pull btrfs fixes from David Sterba:

 - fix folio refcounting when releasing them (encoded write, dummy
   extent buffer)

 - fix out of bounds read when checking qgroup inherit data

 - fix how configurable chunk size is handled in zoned mode

 - in the ref-verify tool, fix uninitialized return value when checking
   extent owner ref and simple quota are not enabled

* tag 'for-6.10-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix folio refcount in __alloc_dummy_extent_buffer()
  btrfs: fix folio refcount in btrfs_do_encoded_write()
  btrfs: fix uninitialized return value in the ref-verify tool
  btrfs: always do the basic checks for btrfs_qgroup_inherit structure
  btrfs: zoned: fix calc_available_free_space() for zoned mode

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bluetooth, wireless and netfilter.

  There's one fix for power management with Intel's e1000e here,
  Thorsten tells us there's another problem that started in v6.9. We're
  trying to wrap that up but I don't think it's blocking.

  Current release - new code bugs:

   - wifi: mac80211: disable softirqs for queued frame handling

   - af_unix: fix uninit-value in __unix_walk_scc(), with the new
     garbage collection algo

  Previous releases - regressions:

   - Bluetooth:
      - qca: fix BT enable failure for QCA6390 after warm reboot
      - add quirk to ignore reserved PHY bits in LE Extended Adv Report,
        abused by some Broadcom controllers found on Apple machines

   - wifi: wilc1000: fix ies_len type in connect path

  Previous releases - always broken:

   - tcp: fix DSACK undo in fast recovery to call tcp_try_to_open(),
     avoid premature timeouts

   - net: make sure skb_datagram_iter maps fragments page by page, in
     case we somehow get compound highmem mixed in

   - eth: bnx2x: fix multiple UBSAN array-index-out-of-bounds when more
     queues are used

  Misc:

   - MAINTAINERS: Remembering Larry Finger"

* tag 'net-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits)
  bnxt_en: Fix the resource check condition for RSS contexts
  mlxsw: core_linecards: Fix double memory deallocation in case of invalid INI file
  inet_diag: Initialize pad field in struct inet_diag_req_v2
  tcp: Don't flag tcp_sk(sk)->rx_opt.saw_unknown for TCP AO.
  selftests: make order checking verbose in msg_zerocopy selftest
  selftests: fix OOM in msg_zerocopy selftest
  ice: use proper macro for testing bit
  ice: Reject pin requests with unsupported flags
  ice: Don't process extts if PTP is disabled
  ice: Fix improper extts handling
  selftest: af_unix: Add test case for backtrack after finalising SCC.
  af_unix: Fix uninit-value in __unix_walk_scc()
  bonding: Fix out-of-bounds read in bond_option_arp_ip_targets_set()
  net: rswitch: Avoid use-after-free in rswitch_poll()
  netfilter: nf_tables: unconditionally flush pending work before notifier
  wifi: iwlwifi: mvm: check vif for NULL/ERR_PTR before dereference
  wifi: iwlwifi: mvm: avoid link lookup in statistics
  wifi: iwlwifi: mvm: don't wake up rx_sync_waitq upon RFKILL
  wifi: iwlwifi: properly set WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK
  wifi: wilc1000: fix ies_len type in connect path
  ...

Pull s390 fixes from Heiko Carstens:

 - Fix and add physical to virtual address translations in dasd and
   virtio_ccw drivers. For virtio_ccw this is just a minimal fix.
   More code cleanup will follow.

 - Small defconfig updates

* tag 's390-6.10-8' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/dasd: Fix invalid dereferencing of indirect CCW data pointer
  s390/vfio_ccw: Fix target addresses of TIC CCWs
  s390: Update defconfigs

Merge tag 'platform-drivers-x86-v6.10-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fix from Hans de Goede:

 - Fix regression in toshiba_acpi introduced in 6.10-rc1

* tag 'platform-drivers-x86-v6.10-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: toshiba_acpi: Fix quickstart quirk handling

Pull Kselftest fix from Mickaël Salaün:
 "Fix Kselftests timeout.

  We can't use CLONE_VFORK, since that blocks the parent - and thus the
  timeout handling - until the child exits or execve's.

  Go back to using plain fork()"

* tag 'kselftest-fix-2024-07-04' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
  selftests/harness: Fix tests timeout and race condition

Merge tag 'mm-hotfixes-stable-2024-07-03-22-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from, Andrew Morton:
 "6 hotfies, all cc:stable. Some fixes for longstanding nilfs2 issues
  and three unrelated MM fixes"

* tag 'mm-hotfixes-stable-2024-07-03-22-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  nilfs2: fix incorrect inode allocation from reserved inodes
  nilfs2: add missing check for inode numbers on directory entries
  nilfs2: fix inode number range checks
  mm: avoid overflows in dirty throttling logic
  Revert "mm/writeback: fix possible divide-by-zero in wb_dirty_limits(), again"
  mm: optimize the redundant loop of mm_update_owner_next()

Merge tag 'drm-misc-fixes-2024-07-04' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes

drm-misc-fixes for v6.10-rc7:
- Add panel quirks.
- Firmware sysfb refcount fix.
- Another null pointer mode deref fix for nouveau.
- Panthor sync and uobj fixes.
- Fix fbdev regression since v6.7.
- Delay free imported bo in ttm to fix lockdep splat.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ffba0c63-2798-40b6-948d-361cd3b14e9f@linux.intel.com