Fix data length written and read in airoha_snand_write_data and
airoha_snand_read_data routines respectively if it is bigger than
SPI_MAX_TRANSFER_SIZE.

Fixes: a403997c ("spi: airoha: add SPI-NAND Flash controller driver")
Tested-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20240913-airoha-spi-fixes-v1-2-de2e74ed4664@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

SPI_NFI_READ_FROM_CACHE_DONE bit must be written at the end of
dirmap_read operation even if it is already set.
In the same way, SPI_NFI_LOAD_TO_CACHE_DONE bit must be written at the
end of dirmap_write operation even if it is already set.
For this reason use regmap_write_bits() instead of regmap_set_bits().
This patch fixes mtd_pagetest kernel module test.

Fixes: a403997c ("spi: airoha: add SPI-NAND Flash controller driver")
Tested-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20240913-airoha-spi-fixes-v1-1-de2e74ed4664@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Use devm_pm_runtime_enable(), devm_request_irq() and
devm_spi_register_controller() to simplify code.

And also register a callback spi_geni_release_dma_chan() with
devm_add_action_or_reset(), to release dma channel in both error
and device detach path, which can make sure the release sequence is
consistent with the original one.

1. Unregister spi controller.
2. Free the IRQ.
3. Free DMA chans
4. Disable runtime PM.

So the remove function can also be removed.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Suggested-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240912091701.3720857-1-ruanjinjie@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

A patch for Qualcomm depends on some fixes.

spi_controller_is_slave() and spi_slave_abort() are all replaced,
so they can be removed.

No functional changed.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://patch.msgid.link/20240910022618.1397-8-yangyingliang@huaweicloud.comSigned-off-by: Mark Brown <broonie@kernel.org>

Switch to use modern name function spi_target_abort().

No functional changed.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20240910022618.1397-7-yangyingliang@huaweicloud.comSigned-off-by: Mark Brown <broonie@kernel.org>

Switch to use modern name target_abort.

No functional changed.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://patch.msgid.link/20240910022618.1397-6-yangyingliang@huaweicloud.comSigned-off-by: Mark Brown <broonie@kernel.org>

Switch to use modern name function spi_target_abort().

No functional changed.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://patch.msgid.link/20240910022618.1397-5-yangyingliang@huaweicloud.comSigned-off-by: Mark Brown <broonie@kernel.org>

Switch to use modern name function spi_target_abort().

No functional changed.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://patch.msgid.link/20240910022618.1397-4-yangyingliang@huaweicloud.comSigned-off-by: Mark Brown <broonie@kernel.org>

Switch to use modern name function spi_target_abort().

No functional changed.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://patch.msgid.link/20240910022618.1397-3-yangyingliang@huaweicloud.comSigned-off-by: Mark Brown <broonie@kernel.org>

Switch to use modern name function spi_controller_is_target().

No functional changed.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://patch.msgid.link/20240910022618.1397-2-yangyingliang@huaweicloud.comSigned-off-by: Mark Brown <broonie@kernel.org>

In spi_geni_remove(), the free_irq() sequence is different from that
on the probe error path. And the IRQ will still remain and it's interrupt
handler may use the dma channel after release dma channel and before free
irq, which is not secure, fix it.

Fixes: b59c1224 ("spi: spi-geni-qcom: Add support for GPI dma")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patch.msgid.link/20240909073141.951494-3-ruanjinjie@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

It's important to undo pm_runtime_use_autosuspend() with
pm_runtime_dont_use_autosuspend() at driver exit time unless driver
initially enabled pm_runtime with devm_pm_runtime_enable()
(which handles it for you).

Hence, switch to devm_pm_runtime_enable() to fix it, so the
pm_runtime_disable() in probe error path and remove function
can be removed.

Fixes: cfdab2cd ("spi: spi-geni-qcom: Set an autosuspend delay of 250 ms")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patch.msgid.link/20240909073141.951494-2-ruanjinjie@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add mailing list imx@lists.linux.dev for nxp spi drivers(qspi, fspi and
dspi).
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://patch.msgid.link/20240905155230.1901787-1-Frank.Li@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add imx@lists.linux.dev and NXP maintainer information for lpspi driver
(drivers/spi/spi-fsl-lpspi.c).
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://patch.msgid.link/20240905154124.1901311-1-Frank.Li@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

The flexspi on imx8ulp only has 16 LUTs, different with others which
have up to 32 LUTs.

Add a separate compatible string and nxp_fspi_devtype_data to support
flexspi on imx8ulp.

Fixes: ef89fd56 ("arm64: dts: imx8ulp: add flexspi node")
Cc: stable@kernel.org
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20240905094338.1986871-4-haibo.chen@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

The flexspi on different SoCs may have different number of LUTs.
So involve lut_num in nxp_fspi_devtype_data to make distinguish.
This patch prepare for the adding of imx8ulp.

Fixes: ef89fd56 ("arm64: dts: imx8ulp: add flexspi node")
Cc: stable@kernel.org
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20240905094338.1986871-3-haibo.chen@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

The flexspi on imx8ulp only has 16 number of LUTs, it is different
with flexspi on other imx SoC which has 32 number of LUTs.

Fixes: ef89fd56 ("arm64: dts: imx8ulp: add flexspi node")
Cc: stable@kernel.org
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20240905094338.1986871-2-haibo.chen@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

The commit 783bf5d0 ("spi: spi-fsl-lpspi: limit PRESCALE bit in
TCR register") doesn't implement the prescaler maximum as intended.
The maximum allowed value for i.MX93 should be 1 and for i.MX7ULP
it should be 7. So this needs also a adjustment of the comparison
in the scldiv calculation.

Fixes: 783bf5d0 ("spi: spi-fsl-lpspi: limit PRESCALE bit in TCR register")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://patch.msgid.link/20240905111537.90389-1-wahrenst@gmx.netSigned-off-by: Mark Brown <broonie@kernel.org>

The unsigned int should use "%u" instead of "%d".
Signed-off-by: zhang jiao <zhangjiao2@cmss.chinamobile.com>
Link: https://patch.msgid.link/20240904073550.103618-1-zhangjiao2@cmss.chinamobile.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Detlev Casanova <detlev.casanova@collabora.com>:

Add the rk3576-armsom-sige5 device tree as well as its rk3576.dtsi base
and pinctrl information in rk3576-pinctrl.dtsi.

The other commits add DT bindings documentation for the devices that
already work with the current corresponding drivers.

Note that as is, the rockchip gpio driver needs the gpio nodes
to be children of the pinctrl node, even though this is deprecated.

When the driver supports it, they can be moved out of the pinctrl node.

The power-domain@RK3576_PD_USB is a child of power-domain@RK3576_PD_VOP.
That looks strange but it is how the hardware is, and confirmed by
Rockchip: The NOC bus of USB passes through the PD of VOP, so it relies on
VOP PD.

The other bindings have been applied on next.

Changes since v3:
- Dropped mmc dt-bindings (submitted in [2])
- Dropped syscon dt-bindings (applied in [3])
- Fix gpu interrupt names mapping
- (Fix email headers overwriting)

Changes since v2:
- Fix LEDs in armsom dts
- mmc: Move allOf after the required block
- Remove saradc dt-binding commit (already applied)
- Remove opp-microvolt-L* fields
- Reword mali commit message
- Use rgmii-id and remove delays on gmac nodes

Changes since v1:
- Add eMMC support
- Add gpu node
- Add rtc node
- Add spi compatible dt-bindings
- Add watchdog support
- Dropped timer compatible commit (applied in [0])
- Move ethernet aliases to board dt
- Move mmio nodes to soc node
- Removed cru grf phandle
- Removed gpio aliases
- Removed grf compatibles (applied in [1])
- Removed pinctrl php-grf phandle
- Removed v2-tuning for sdcard
- Renamed clock nodes
- Renamed regulators do match regulator-vcc-<voltage>-<name>
- Renamed the rkvdec_sram node to vdec_sram to match prior generations
- Reorder fields consistently in nodes
- Use correct #power-domain-cells values

[0]: https://lore.kernel.org/all/918bb9e4-02d9-4dca-bed2-28bb123bdc10@linaro.org/
[1]: https://lore.kernel.org/all/172441646605.877570.8075942261050000.b4-ty@sntech.de/
[2]: https://lore.kernel.org/all/20240903145615.9302-1-detlev.casanova@collabora.com/
[3]: https://lore.kernel.org/all/172500660860.97285.13837050366813522297.b4-ty@kernel.org/

Detlev.

Detlev Casanova (9):
  dt-bindings: arm: rockchip: Add ArmSoM Sige 5
  dt-bindings: arm: rockchip: Add rk3576 compatible string to pmu.yaml
  dt-bindings: i2c: i2c-rk3x: Add rk3576 compatible
  dt-bindings: serial: snps-dw-apb-uart: Add Rockchip RK3576
  dt-bindings: gpu: Add rockchip,rk3576-mali compatible
  dt-bindings: watchdog: Add rockchip,rk3576-wdt compatible
  spi: dt-bindings: Add rockchip,rk3576-spi compatible
  arm64: dts: rockchip: Add rk3576 SoC base DT
  arm64: dts: rockchip: Add rk3576-armsom-sige5 board

 .../devicetree/bindings/arm/rockchip.yaml     |    5 +
 .../devicetree/bindings/arm/rockchip/pmu.yaml |    2 +
 .../bindings/gpu/arm,mali-bifrost.yaml        |    1 +
 .../devicetree/bindings/i2c/i2c-rk3x.yaml     |    1 +
 .../bindings/serial/snps-dw-apb-uart.yaml     |    1 +
 .../devicetree/bindings/spi/spi-rockchip.yaml |    1 +
 .../bindings/watchdog/snps,dw-wdt.yaml        |    1 +
 arch/arm64/boot/dts/rockchip/Makefile         |    1 +
 .../boot/dts/rockchip/rk3576-armsom-sige5.dts |  659 ++
 .../boot/dts/rockchip/rk3576-pinctrl.dtsi     | 5775 +++++++++++++++++
 arch/arm64/boot/dts/rockchip/rk3576.dtsi      | 1644 +++++
 11 files changed, 8091 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5.dts
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3576-pinctrl.dtsi
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3576.dtsi

--
2.46.0

Replace SET_RUNTIME_PM_OPS()/SET SYSTEM_SLEEP_PM_OPS() with their modern
RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() alternatives.

The combined usage of pm_ptr() and RUNTIME_PM_OPS/SYSTEM_SLEEP_PM_OPS()
allows the compiler to evaluate if the runtime suspend/resume() functions
are used at build time or are simply dead code.

This allows removing the __maybe_unused annotations from the
suspend/resume() functions.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Link: https://patch.msgid.link/20240902184655.932699-1-festevam@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

It is compatible with the rockchip,rk3066-spi SPI core.
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240903152308.13565-8-detlev.casanova@collabora.comSigned-off-by: Mark Brown <broonie@kernel.org>

When the of_device_id entry for "elgin,jg10309-01" was added, the
corresponding spi_device_id was forgotten, causing a warning message
during boot-up:

    SPI driver spidev has no spi_device_id for elgin,jg10309-01

Fix module autoloading and shut up the warning by adding the missing
entry.

Fixes: 5f3eee1e ("spi: spidev: Add an entry for elgin,jg10309-01")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/54bbb9d8a8db7e52d13e266f2d4a9bcd8b42a98a.1725366625.git.geert+renesas@glider.beSigned-off-by: Mark Brown <broonie@kernel.org>

Commit 8a0ec8c2 ("spi: Insert the missing pci_dev_put()before
return") added two uses of pci_dev_put() with an uninitialized dma_dev,
resulting in the following compiler warnings (or errors with
CONFIG_WERROR) when building with clang:

  drivers/spi/spi-pxa2xx-pci.c:150:15: error: variable 'dma_dev' is uninitialized when used here [-Werror,-Wuninitialized]
    150 |                 pci_dev_put(dma_dev);
        |                             ^~~~~~~
  drivers/spi/spi-pxa2xx-pci.c:228:15: error: variable 'dma_dev' is uninitialized when used here [-Werror,-Wuninitialized]
    228 |                 pci_dev_put(dma_dev);
        |                             ^~~~~~~

Commit 609d7ffd ("spi: pxa2xx-pci: Balance reference count for PCI
DMA device") added a call to pci_dev_put() via
devm_add_action_or_reset() in case of failures, so the recent change was
incorrect for multiple reasons. Revert it altogether.

Fixes: 8a0ec8c2 ("spi: Insert the missing pci_dev_put()before return")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/CAMuHMdWNjo69_W6f+R9QJJOf8uF0htg2XazeS-yjugJv3UM+kg@mail.gmail.com/Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20240902-spi-revert-8a0ec8c2d736-v1-1-928b829fed2b@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

In zynq_qspi_exec_mem_op(), the temporary buffer is allocated with
kzalloc and then immediately initialized using memset to 0xff. To
optimize this, replace kzalloc with kmalloc, as the zeroing operation
is redundant and unnecessary.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Link: https://patch.msgid.link/20240814192839.345523-1-visitorckw@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Sort the headers in alphabetic order in order to ease
the maintenance for this part.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240902103203.2476576-1-andriy.shevchenko@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The commit had been applied twice as
  0f245463 ("spi: ppc4xx: handle irq_of_parse_and_map() errors")
and
  f1011ba2 ("spi: ppc4xx: handle irq_of_parse_and_map() errors")

This reverts commit f1011ba2.

Fixes: f1011ba2 ("spi: ppc4xx: handle irq_of_parse_and_map() errors")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240902102853.2476165-1-andriy.shevchenko@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded based
on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Link: https://patch.msgid.link/20240831094231.795024-1-liaochen4@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

Use the dev_err_probe() helper to simplify error handling during probe.
This also handle scenario, when EDEFER is returned and useless error
is printed.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://patch.msgid.link/20240826121421.3384792-3-ruanjinjie@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

Use devm_spi_alloc_host() so that there's no need to call
spi_controller_put() in the error path.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://patch.msgid.link/20240826121421.3384792-2-ruanjinjie@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

The header file linux/platform_device.h is included
twice. Remove the last one.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://patch.msgid.link/20240830075800.3541646-1-lihongbo22@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

intel_spi_populate_chip() use devm_kasprintf() to set pdata->name.
This can return a NULL pointer on failure but this returned value
is not checked.

Fixes: e58db3bc ("spi: intel: Add default partition and name to the second chip")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://patch.msgid.link/20240830074106.8744-1-hanchunchao@inspur.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Jinjie Ruan <ruanjinjie@huawei.com>:

Fix uninitialized res in probe function.

Merge series from Jinjie Ruan <ruanjinjie@huawei.com>:

Fix missing pm_runtime_disable().

Merge series from Jinjie Ruan <ruanjinjie@huawei.com>:

Fix uninitialized res in probe function.

The rv1108-elgin-r1 board has an LCD controlled via SPI in userspace.
The marking on the LCD is JG10309-01.

Add the "elgin,jg10309-01" compatible string.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240828180057.3167190-2-festevam@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

When the original file is guaranteed to contain the minmax.h header file
and compile correctly, using the real macro is usually
more intuitive and readable.
Signed-off-by: Yan Zhen <yanzhen@vivo.com>
Link: https://patch.msgid.link/20240827131203.3918516-1-yanzhen@vivo.comSigned-off-by: Mark Brown <broonie@kernel.org>

The rv1108-elgin-r1 board has an LCD controlled via SPI in userspace.
The marking on the LCD is JG10309-01.

Add the "elgin,jg10309-01" compatible string.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240829113158.3324928-2-festevam@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

The rv1108-elgin-r1 board has an LCD controlled via SPI in userspace.
The marking on the LCD is JG10309-01.

Add an entry for the "elgin,jg10309-01" compatible string.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240829113158.3324928-1-festevam@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>