- 31 Aug, 2021 2 commits
-
-
Angus Wang authored
[WHY] The change has caused high idle memory clock speed and power consumption at some resolutions and frame rates for Navi10 [HOW] Reverted change "drm/amd/display: Fixed Intermittent blue screen on OLED panel" Reviewed-by:
Aric Cyr <aric.cyr@amd.com> Acked-by:
Mikita Lipski <mikita.lipski@amd.com> Signed-off-by:
Angus Wang <angus.wang@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Anson Jacob authored
Free memory allocated if any of the previous allocations failed. >>> CID 1487129: Resource leaks (RESOURCE_LEAK) >>> Variable "vpg" going out of scope leaks the storage it points to. Addresses-Coverity-ID: 1487129: ("Resource leaks") Reviewed-by:Anson Jacob <Anson.Jacob@amd.com> Signed-off-by:
-
- 30 Aug, 2021 13 commits
-
-
Colin Ian King authored
There are three identical spelling mistakes in dev_err messages. Fix these. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Koba Ko authored
Due to high latency in PCIE clock switching on RKL platforms, switching the PCIE clock dynamically at runtime can lead to HDMI/DP audio problems. On newer asics this is handled in the SMU firmware. For SMU7-based asics, disable PCIE clock switching to avoid the issue. AMD provide a parameter to disable PICE_DPM. modprobe amdgpu ppfeaturemask=0xfff7bffb It's better to contorl PCIE_DPM in amd gpu driver, switch PCI_DPM by determining intel RKL platform for SMU7-based asics. Fixes: 1a31474c ("drm/amd/pm: workaround for audio noise issue") Ref: https://lists.freedesktop.org/archives/amd-gfx/2021-August/067413.htmlSigned-off-by:
Koba Ko <koba.ko@canonical.com> Signed-off-by:
-
Lang Yu authored
To cover the corner case that people want to know the ID of an UNKNOWN CMD. Suggested-by:
John Clements <john.clements@amd.com> Signed-off-by:
Lang Yu <lang.yu@amd.com> Reviewed-by:
Huang Rui <ray.huang@amd.com> Signed-off-by:
-
Aaron Liu authored
Scatter/gather is APU feature starting from carrizo. adev->apu_flags is not used for all APUs. adev->flags & AMD_IS_APU can be used for all APUs. Signed-off-by:
Aaron Liu <aaron.liu@amd.com> Reviewed-by:
-
Nicholas Kazlauskas authored
Missing code for Yellow Carp to enable scatter gather - follows how DCN21 support was added. Tested that 8k framebuffer allocation and display can now succeed after applying the patch. v2: Add hookup in DM Reviewed-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by:
-
Kees Cook authored
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally writing across neighboring fields. The "Board Parameters" members of the structs: struct atom_smc_dpm_info_v4_5 struct atom_smc_dpm_info_v4_6 struct atom_smc_dpm_info_v4_7 struct atom_smc_dpm_info_v4_10 are written to the corresponding members of the corresponding PPTable_t variables, but they lack destination size bounds checking, which means the compiler cannot verify at compile time that this is an intended and safe memcpy(). Since the header files are effectively immutable[1] and a struct_group() cannot be used, nor a common struct referenced by both sides of the memcpy() arguments, add a new helper, amdgpu_memcpy_trailing(), to perform the bounds checking at compile time. Replace the open-coded memcpy()s with amdgpu_memcpy_trailing() which includes enough context for the bounds checking. "objdump -d" shows no object code changes. [1] https://lore.kernel.org/lkml/e56aad3c-a06f-da07-f491-a894a570d78f@amd.com Cc: "Christian König" <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Hawking Zhang <Hawking.Zhang@amd.com> Cc: Feifei Xu <Feifei.Xu@amd.com> Cc: Likun Gao <Likun.Gao@amd.com> Cc: Jiawei Gu <Jiawei.Gu@amd.com> Cc: Evan Quan <evan.quan@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Reviewed-by:
Lijo Lazar <lijo.lazar@amd.com> Acked-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Evan Quan authored
This reverts the commit below: "drm/amdgpu: disable BACO support for 699F:C7 polaris12 SKU temporarily". As the S3 hang issue has been fixed by another commit: "drm/amdgpu: add missing cleanups for Polaris12 UVD/VCE on suspend". Signed-off-by:
Evan Quan <evan.quan@amd.com> Acked-by:
-
YuBiao Wang authored
Send response to host after received the flr notification from host. Port NV change to vega10. Signed-off-by:
YuBiao Wang <YuBiao.Wang@amd.com> Reviewed-by:
Jingwen Chen <Jingwen.Chen2@amd.com> Signed-off-by:
-
Alex Deucher authored
New PCI IDs. Reviewed-by:
Tao Zhou <tao.zhou1@amd.com> Signed-off-by:
-
Yifan Zhang authored
The parameters were renamed. Signed-off-by:
Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Luben Tuikov authored
We can now process any RAS EEPROM address from VBIOS. Generalize so as to compute the top three bits of the 19-bit EEPROM address, from any byte returned as the "i2c address" from VBIOS. Cc: John Clements <john.clements@amd.com> Cc: Hawking Zhang <Hawking.Zhang@amd.com> Cc: Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by:
Luben Tuikov <luben.tuikov@amd.com> Reviewed-by:
-
Luben Tuikov authored
1) Generalize the function--if the user didn't set i2c_address, still return true/false to indicate whether VBIOS contains the RAS EEPROM address. This function shouldn't evaluate whether the user set the i2c_address pointer or not. 2) Don't touch the caller's i2c_address, unless you have to--this function shouldn't have side effects. 3) Correctly set the function comment as a kernel-doc comment. Cc: John Clements <john.clements@amd.com> Cc: Hawking Zhang <Hawking.Zhang@amd.com> Cc: Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by:
-
Jing Yangyang authored
./drivers/gpu/drm/amd/display/dc/dcn31/dcn31_panel_cntl.c:112:9-10:WARNING: return of 0/1 in function 'dcn31_is_panel_backlight_on' with return type bool ./drivers/gpu/drm/amd/display/dc/dcn31/dcn31_panel_cntl.c:122:9-10:WARNING: return of 0/1 in function 'dcn31_is_panel_powered_on' with return type bool Return statements in functions returning bool should use true/false instead of 1/0. Generated by: scripts/coccinelle/misc/boolreturn.cocci Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Jing Yangyang <jing.yangyang@zte.com.cn> Signed-off-by:
-
- 29 Aug, 2021 2 commits
-
-
Dave Airlie authored
Merge tag 'amd-drm-next-5.15-2021-08-27' of https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-5.15-2021-08-27: amdgpu: - PLL fix for SI - Misc code cleanups - RAS fixes - PSP cleanups - Polaris UVD/VCE suspend fixes - aldebaran fixes - DCN3.x mclk fixes amdkfd: - CWSR fixes for arcturus and aldebaran - SVM fixes Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210827192336.4649-1-alexander.deucher@amd.com
-
Dave Airlie authored
Merge tag 'drm-intel-next-fixes-2021-08-26' of git://anongit.freedesktop.org/drm/drm-intel into drm-next drm/i915 fixes for v5.15-rc1: - Disable underrun recovery with eDP MSO panels on ADL-P - Use designated initializers for init/exit table - Fix some error pointer usages Signed-off-by:
-
- 26 Aug, 2021 12 commits
-
-
Nicholas Kazlauskas authored
[Why] This is a global parameter, not a per pipe parameter and it's useful for experimenting with the prefetch schedule to be adjustable from the SOC bb. [How] Add a parameter to the SOC bb, default is the existing policy for all DCN. Fill it in when filling SOC bb parameters. Revert the policy to use MinDCFClk at the same time since that's not going to give us P-State in most cases on the spreadsheet. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1403Signed-off-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by:
-
Aurabindo Pillai authored
[Why & How] DML is initialized again unnecessarily after its done conditionally. Remove the duplicate initialization Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1403Signed-off-by:
-
Jerry (Fangzhi) Zuo authored
[Why] Drop hardcoded dispclk, dppclk, phyclk [How] Read the corresponding values from clock table entries already populated. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1403 Cc: stable@vger.kernel.org Signed-off-by:
Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com> Signed-off-by:
-
Aurabindo Pillai authored
[Why & How] The DCN3 SoC parameter num_states was calculated but not saved into the object. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1403 Cc: stable@vger.kernel.org Signed-off-by:
-
Hawking Zhang authored
disable GFX CGCG and CGLS to workaround a hardware issue found in aldebaran. Signed-off-by:
Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by:
-
John Clements authored
resolve register address issue for detecting/clearing RAS interrupt Reviewed-by:
-
John Clements authored
Update XGMI RAS to support error query on aldebaran Reviewed-by:
-
Sean Keely authored
On systems with multiple SH per SE compute_static_thread_mgmt_se# is split into independent masks, one for each SH, in the upper and lower 16 bits. We need to detect this and apply cu masking to each SH. The cu mask bits are assigned first to each SE, then to alternate SHs, then finally to higher CU id. This ensures that the maximum number of SPIs are engaged as early as possible while balancing CU assignment to each SH. v2: Use max SH/SE rather than max SH in cu_per_sh. v3: Fix comment blocks, ensure se_mask is initially zero filled, and correctly assign se.sh.cu positions to unset bits in cu_mask. Signed-off-by:Sean Keely <Sean.Keely@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Dave Airlie authored
Merge tag 'exynos-drm-next-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next Two fixups - Fix missing unlock issue in exynos_drm_g2d.c - Fix a build warning in exynos_drm_dma.c One cleanup - Replace atomic_t with refcount_t in exynos_drm_g2d.c Signed-off-by:
-
ssh://git.freedesktop.org/git/tegra/linuxDave Airlie authored
drm/tegra: Changes for v5.15-rc1 The bulk of these changes is a more modern ABI that can be efficiently used on newer SoCs as well as older ones. The userspace parts for this are available here: - libdrm support: https://gitlab.freedesktop.org/tagr/drm/-/commits/drm-tegra-uabi-v8 - VAAPI driver: https://github.com/cyndis/vaapi-tegra-driver In addition, existing userspace from the grate reverse-engineering project has been updated to use this new ABI: - X11 driver: https://github.com/grate-driver/xf86-video-opentegra - 3D driver: https://github.com/grate-driver/grate Other than that, there's also support for display memory bandwidth management for various generations and a bit of cleanup. Signed-off-by:
-
Dave Airlie authored
Merge commit '81fd23e2' of https://git.pengutronix.de/git/lst/linux into drm-next things are still slow in etnaviv land. Just one hardware support addition for the GPU found on the NXP Layerscape LS1028A SoC from Michael and the GEM mmap cleanup from Thomas. Signed-off-by:
-
Dave Airlie authored
Merge tag 'amd-drm-next-5.15-2021-08-20' of https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-5.15-2021-08-20: amdgpu: - embed hw fence into job - Misc SMU fixes - PSP TA code cleanup - RAS fixes - PWM fan speed fixes - DC workqueue cleanups - SR-IOV fixes - gfxoff delayed work fix - Pin domain check fix amdkfd: - SVM fixes radeon: - Code cleanup Signed-off-by:
-
- 25 Aug, 2021 4 commits
-
-
Yifan Zhang authored
amdgpu_bo_get_preferred_pin_domain is used for page tables creation, which is not involved with page pinning. And it is used in more cases than display scanout, modify its documentation as well. Signed-off-by:
-
Evan Quan authored
As those _sw_fini() APIs follow just after _suspend() APIs. And the cancel_delayed_work_sync was already called in latter. Signed-off-by:
Guchun Chen <guchun.chen@amd.com> Signed-off-by:
-
Evan Quan authored
This is a supplement for commit below: "drm/amdgpu: add missing cleanups for Polaris12 UVD/VCE on suspend". Signed-off-by:
-
Evan Quan authored
Perform proper cleanups on UVD/VCE suspend: powergate enablement, clockgating enablement and dpm disablement. This can fix some hangs observed on suspending when UVD/VCE still using(e.g. issue "pm-suspend" when video is still playing). Signed-off-by:
xinhui pan <xinhui.pan@amd.com> Reviewed-by:
-
- 24 Aug, 2021 7 commits
-
-
Philip Yang authored
Restore retry fault or prefetch range, or restore svm range after eviction to map range to GPU with correct read or write access permission. Range may includes multiple VMAs, update GPU page table with offset of prange, number of pages for each VMA according VMA access permission. Signed-off-by:
Philip Yang <Philip.Yang@amd.com> Reviewed-by:
-
Philip Yang authored
Check range access permission to restore GPU retry fault, if GPU retry fault on address which belongs to VMA, and VMA has no read or write permission requested by GPU, failed to restore the address. The vm fault event will pass back to user space. Signed-off-by:
-
John Clements authored
Resolve bug querying error on unsupported ASIC Reviewed-by:
-
John Clements authored
Add MCA specific IP blocks targetting RAS features Reviewed-by:
-
Praful Swarnakar authored
[Why] Recent HDMI2.0 HF1-1 V-Swing testing showed that logging deep color status helps in validation of testcase. [How] Add logging based on various color depths and pixel encoding formats. Signed-off-by:
Praful Swarnakar <Praful.Swarnakar@amd.com> Reviewed-by:
Hersen Wu <hersenwu@amd.com> Signed-off-by:
-
Candice Li authored
Signed-off-by:
Candice Li <candice.li@amd.com> Reviewed-by:
-
Candice Li authored
Adding name field back to ras_common_if to work around error injection failure with amdgpuras tool. Signed-off-by:
-
