- 27 May, 2008 28 commits
-
-
Jeremy Fitzhardinge authored
This patch implements Xen save/restore and migration. Saving is triggered via xenbus, which is polled in drivers/xen/manage.c. When a suspend request comes in, the kernel prepares itself for saving by: 1 - Freeze all processes. This is primarily to prevent any partially-completed pagetable updates from confusing the suspend process. If CONFIG_PREEMPT isn't defined, then this isn't necessary. 2 - Suspend xenbus and other devices 3 - Stop_machine, to make sure all the other vcpus are quiescent. The Xen tools require the domain to run its save off vcpu0. 4 - Within the stop_machine state, it pins any unpinned pgds (under construction or destruction), performs canonicalizes various other pieces of state (mostly converting mfns to pfns), and finally 5 - Suspend the domain Restore reverses the steps used to save the domain, ending when all the frozen processes are thawed. Signed-off-by:Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de>
-
Jeremy Fitzhardinge authored
When restoring, rebind the existing xenbus irq to the new xenbus event channel. (It turns out in practice that this is always the same, and is never updated on restore. That's a bug, but Xeno-linux has been like this for a long time, so it can't really be fixed.) Signed-off-by:
-
Jeremy Fitzhardinge authored
Add code to: 1. Deal with the console page being canonicalized. During save, the console's mfn in the start_info structure is canonicalized to a pfn. In order to deal with that, we always use a copy of the pfn and indirect off that all the time. However, we fall back to using the mfn if the pfn hasn't been initialized yet. 2. Restore the console event channel, and rebind it to the existing irq. Signed-off-by: -
Jeremy Fitzhardinge authored
Rearrange the tests in unbind_from_irq() so that we can still unbind an irq even if the underlying event channel is bad. This allows a device driver to shuffle its irqs on save/restore before the underlying event channels have been fixed up. Signed-off-by:
-
Jeremy Fitzhardinge authored
Add rebind_evtchn_irq(), which will rebind an device driver's existing irq to a new event channel on restore. Since the new event channel will be masked and bound to vcpu0, we update the state accordingly and unmask the irq once everything is set up. Signed-off-by:
-
Jeremy Fitzhardinge authored
When saving a domain, the Xen tools need to remap all our mfns to portable pfns. In order to remap our p2m table, it needs to know where all its pages are, so maintain the references to the p2m table for it to use. Signed-off-by:
-
Jeremy Fitzhardinge authored
Rename dummy_shared_info to xen_dummy_shared_info and make it non-static, in anticipation of users outside of enlighten.c Signed-off-by:
-
Jeremy Fitzhardinge authored
When using sparsemem and memory hotplug, the kernel's pseudo-physical address space can be discontigious. Previously this was dealt with by having the upper parts of the radix tree stubbed off. Unfortunately, this is incompatible with save/restore, which requires a complete p2m table. The solution is to have a special distinguished all-invalid p2m leaf page, which we can point all the hole areas at. This allows the tools to see a complete p2m table, but it only costs a page for all memory holes. It also simplifies the code since it removes a few special cases. Signed-off-by:
-
Jeremy Fitzhardinge authored
Add a config option to set the max size of a Xen domain. This is used to scale the size of the physical-to-machine array; it ends up using around 1 page/GByte, so there's no reason to be very restrictive. For a 32-bit guest, the default value of 8GB is probably sufficient; there's not much point in giving a 32-bit machine much more memory than that. Signed-off-by:
-
Jeremy Fitzhardinge authored
We now support the use of memory hotplug, so the physical to machine page mapping structure must be dynamic. This is implemented as a two-level radix tree structure, which allows us to efficiently incrementally allocate memory for the p2m table as new pages are added. Signed-off-by:
-
Adrian Bunk authored
Make the needlessly global balloon_set_new_target() static. Signed-off-by:
Adrian Bunk <bunk@kernel.org> Acked-by:
Chris Wright <chrisw@sous-sol.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Jeremy Fitzhardinge authored
Make sure resched interrupts appear in /proc/interrupts in the proper place. Signed-off-by:
-
Isaku Yamahata authored
Add xen handles realted definitions for xen memory which ia64/xen needs. Pointer argumsnts for ia64/xen hypercall are passed in pseudo physical address (guest physical address) so that it is required to convert guest kernel virtual address into pseudo physical address. The xen guest handle represents such arguments. Signed-off-by:
Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by:
-
Isaku Yamahata authored
fix compilation error of ballon driver on ia64. extent_start member is pointer argument. On x86 pointer argument for xen hypercall is passed as virtual address. On the other hand, ia64 and ppc, pointer argument is passed in pseudo physical address. (guest physicall address.) So they must be passed as handle and convert right before issuing hypercall. CC drivers/xen/balloon.o linux-2.6-x86/drivers/xen/balloon.c: In function 'increase_reservation': linux-2.6-x86/drivers/xen/balloon.c:228: error: incompatible types in assignment linux-2.6-x86/drivers/xen/balloon.c: In function 'decrease_reservation': linux-2.6-x86/drivers/xen/balloon.c:324: error: incompatible types in assignment linux-2.6-x86/drivers/xen/balloon.c: In function 'dealloc_pte_fn': linux-2.6-x86/drivers/xen/balloon.c:486: error: incompatible types in assignment linux-2.6-x86/drivers/xen/balloon.c: In function 'alloc_empty_pages_and_pagevec': linux-2.6-x86/drivers/xen/balloon.c:522: error: incompatible types in assignment make[2]: *** [drivers/xen/balloon.o] Error 1 Signed-off-by:
-
Isaku Yamahata authored
move arch/x86/xen/manage.c under drivers/xen/to share codes with x86 and ia64. ia64/xen also uses manage.c Signed-off-by:
-
Jeremy Fitzhardinge authored
For some perverse reason, if you call add_preferred_console() it prevents setup_early_printk() from successfully enabling the boot console - unless you make it a preferred console too... Also, make xenboot console output distinct from normal console output, since it gets repeated when the console handover happens, and the duplicated output is confusing without disambiguation. Signed-off-by:
-
Markus Armbruster authored
The pvfb backend indicates dynamic mode support by creating node feature_resize with a non-zero value in its xenstore directory. xen-fbfront sends a resize notification event on mode change. Fully backwards compatible both ways. Framebuffer size and initial resolution can be controlled through kernel parameter xen_fbfront.video. The backend enforces a separate size limit, which it advertises in node videoram in its xenstore directory. xen-kbdfront gets the maximum screen resolution from nodes width and height in the backend's xenstore directory instead of hardcoding it. Additional goodie: support for larger framebuffers (512M on a 64-bit system with 4K pages). Changing the number of bits per pixels dynamically is not supported, yet. Ported from http://xenbits.xensource.com/linux-2.6.18-xen.hg?rev/92f7b3144f41 http://xenbits.xensource.com/linux-2.6.18-xen.hg?rev/bfc040135633Signed-off-by:
Pat Campbell <plc@novell.com> Signed-off-by:
Markus Armbruster <armbru@redhat.com> Signed-off-by:
-
Markus Armbruster authored
This isn't a security flaw (the backend can see all our memory anyway). But it's the right thing to do all the same. Signed-off-by:
-
Markus Armbruster authored
These are mostly for completeness and consistency with the other frontends, as PVFB is typically compiled in rather than a module. Derived from http://xenbits.xensource.com/linux-2.6.18-xen.hg?rev/5e294e29a43e While there, add module descriptions. Signed-off-by:
-
Markus Armbruster authored
Add z-axis motion to pointer events. Backward compatible, because there's space for the z-axis in union xenkbd_in_event, and old backends zero it. Derived from http://xenbits.xensource.com/linux-2.6.18-xen.hg?rev/57dfe0098000 http://xenbits.xensource.com/linux-2.6.18-xen.hg?rev/1edfea26a2a9 http://xenbits.xensource.com/linux-2.6.18-xen.hg?rev/c3ff0b26f664Signed-off-by:
-
Markus Armbruster authored
Without console= arguments on the kernel command line, the first console to register becomes enabled and the preferred console (the one behind /dev/console). This is normally tty (assuming CONFIG_VT_CONSOLE is enabled, which it commonly is). This is okay as long tty is a useful console. But unless we have the PV framebuffer, and it is enabled for this domain, tty0 in domU is merely a dummy. In that case, we want the preferred console to be the Xen console hvc0, and we want it without having to fiddle with the kernel command line. Commit b8c2d3df did that for us. Since we now have the PV framebuffer, we want to enable and prefer tty again, but only when PVFB is enabled. But even then we still want to enable the Xen console as well. Problem: when tty registers, we can't yet know whether the PVFB is enabled. By the time we can know (xenstore is up), the console setup game is over. Solution: enable console tty by default, but keep hvc as the preferred console. Change the preferred console to tty when PVFB probes successfully, unless we've been given console kernel parameters. Signed-off-by:
-
Jeremy Fitzhardinge authored
Add pte_flags() to extract the flags from a pte. This is a special case of pte_val() which is only guaranteed to return the pte's flags correctly; the page number may be corrupted or missing. The intent is to allow paravirt implementations to return pte flags without having to do any translation of the page number (most notably, Xen). Signed-off-by:
-
Jeremy Fitzhardinge authored
When enabling interrupts, we don't need to worry about preemption, because we either enter with interrupts disabled - so no preemption - or the caller is confused and is re-enabling interrupts on some indeterminate processor. Signed-off-by:
-
Jeremy Fitzhardinge authored
The guest can legitimately change things like cr4.OSFXSR and OSXMMEXCPT, so let it. Signed-off-by:
-
Jeremy Fitzhardinge authored
Use the new sched_op hypercall, mainly because xenner doesn't support the old one. Signed-off-by:
-
Jeremy Fitzhardinge authored
Xen will trap and emulate clts, but its better to use a hypercall. Also, xenner doesn't handle clts. Signed-off-by:
-
Jeremy Fitzhardinge authored
When using "earlyprintk=xen", also write the console output to the raw debug console. This will appear on dom0's console if the hypervisor has been compiled to allow it. Signed-off-by:
-
Jeremy Fitzhardinge authored
Add a couple of functions which can write directly to the Xen console for debugging. This output ends up on the host's dom0 console (assuming it allows the domain to write there). Signed-off-by:
-
- 22 May, 2008 1 commit
-
-
Jeremy Fitzhardinge authored
Non-PAE operation has been deprecated in Xen for a while, and is rarely tested or used. xen-unstable has now officially dropped non-PAE support. Since Xen/pvops' non-PAE support has also been broken for a while, we may as well completely drop it altogether. Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
- 21 May, 2008 11 commits
-
-
Al Viro authored
driver uses symbols defined only on ARM Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Al Viro authored
Whether we sidestep it in init/main.c or not, such situations will arise again; compiler does generate calls of strcat() on optimizations, so we really ought to have an out-of-line version... Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
... and we have few enough places using the latter to make it simpler to do search and replace... Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
memcpy() from userland pointer is a Bad Thing(tm) Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
