- 30 May, 2018 40 commits
-
-
Wolfram Sang authored
[ Upstream commit 1293b619 ] Due to a typo, the mask was destroyed by a comparison instead of a bit shift. Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
Inki Dae <inki.dae@samsung.com> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yufen Yu authored
[ Upstream commit 01a69cab ] In the case of 'recover', an r10bio with R10BIO_WriteError & R10BIO_IsRecover will be progressed by handle_write_completed(). This function traverses all r10bio->devs[copies]. If devs[m].repl_bio != NULL, it thinks conf->mirrors[dev].replacement is also not NULL. However, this is not always true. When there is an rdev of raid10 has replacement, then each r10bio ->devs[m].repl_bio != NULL in conf->r10buf_pool. However, in 'recover', even if corresponded replacement is NULL, it doesn't clear r10bio ->devs[m].repl_bio, resulting in replacement NULL deference. This bug was introduced when replacement support for raid10 was added in Linux 3.3. As NeilBrown suggested: Elsewhere the determination of "is this device part of the resync/recovery" is made by resting bio->bi_end_io. If this is end_sync_write, then we tried to write here. If it is NULL, then we didn't try to write. Fixes: 9ad1aefc ("md/raid10: Handle replacement devices during resync.") Cc: stable (V3.3+) Suggested-by:
NeilBrown <neilb@suse.com> Signed-off-by:
Yufen Yu <yuyufen@huawei.com> Signed-off-by:
Shaohua Li <sh.li@alibaba-inc.com> Signed-off-by:
-
Felix Fietkau authored
[ Upstream commit 651b9920 ] This ensures that mac80211 allocated management frames are properly aligned, which makes copying them more efficient. For instance, mt76 uses iowrite32_copy to copy beacon frames to beacon template memory on the chip. Misaligned 32-bit accesses cause CPU exceptions on MIPS and should be avoided. Signed-off-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Kees Cook authored
[ Upstream commit fe9c8426 ] The tlv_len is u8, so we need to limit the size of the SDP URI. Enforce this both in the NLA policy and in the code that performs the allocation and copy, to avoid writing past the end of the allocated buffer. Fixes: d9b8d8e1 ("NFC: llcp: Service Name Lookup netlink interface") Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit 8cbbf174 ] When exposing data access through debugfs, the correct debugfs_create_*() functions must be used, depending on data type. Remove all casts from data pointers passed to debugfs_create_*() functions, as such casts prevent the compiler from flagging bugs. Correct all wrong usage: - clk.rate is unsigned long, not u32, - clk.flags is u8, not u32, which exposed the successive clk.rate_offset and clk.src_offset fields. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Tony Lindgren authored
[ Upstream commit d3be6d2a ] For platform_suspend_ops, the finish call is too late to re-enable wake irqs and we need re-enable wake irqs on wake call instead. Otherwise noirq resume for devices has already happened. And then dev_pm_disarm_wake_irq() has already disabled the dedicated wake irqs when the interrupt triggers and the wake irq is never handled. For devices that are already in PM runtime suspended state when we enter suspend this means that a possible wake irq will never trigger. And this can lead into a situation where a device has a pending padconf wake irq, and the device will stay unresponsive to any further wake irqs. This issue can be easily reproduced by setting serial console log level to zero, letting the serial console idle, and suspend the system from an ssh terminal. Then try to wake up the system by typing to the serial console. Note that this affects only omap3 PRM interrupt as that's currently the only omap variant that does anything in omap_pm_wake(). In general, for the wake irqs to work, the interrupt must have either IRQF_NO_SUSPEND or IRQF_EARLY_RESUME set for it to trigger before dev_pm_disarm_wake_irq() disables the wake irqs. Reported-by:
Grygorii Strashko <grygorii.strashko@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by:
-
Qi Hou authored
[ Upstream commit db35340c ] When more than one GP timers are used as kernel system timers and the corresponding nodes in device-tree are marked with the same "disabled" property, then the "attr" field of the property will be initialized more than once as the property being added to sys file system via __of_add_property_sysfs(). In __of_add_property_sysfs(), the "name" field of pp->attr.attr is set directly to the return value of safe_name(), without taking care of whether it's already a valid pointer to a memory block. If it is, its old value will always be overwritten by the new one and the memory block allocated before will a "ghost", then a kmemleak happened. That the same "disabled" property being added to different nodes of device tree would cause that kind of kmemleak overhead, at least once. To fix it, allocate the property dynamically, and delete static one. Signed-off-by:
Qi Hou <qi.hou@windriver.com> Signed-off-by:
-
Manish Rangankar authored
[ Upstream commit 1bc5ad3a ] A system crashes when continuously removing/re-adding the storage controller. Signed-off-by:
Manish Rangankar <manish.rangankar@cavium.com> Reviewed-by:
Ewan D. Milne <emilne@redhat.com> Reviewed-by:
Tomas Henzl <thenzl@redhat.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Meelis Roos authored
[ Upstream commit 00c20cdc ] When aacraid init fails with "AAC0: adapter self-test failed.", shutdown leads to UBSAN warning and then oops: [154316.118423] ================================================================================ [154316.118508] UBSAN: Undefined behaviour in drivers/scsi/scsi_lib.c:2328:27 [154316.118566] member access within null pointer of type 'struct Scsi_Host' [154316.118631] CPU: 2 PID: 14530 Comm: reboot Tainted: G W 4.15.0-dirty #89 [154316.118701] Hardware name: Hewlett Packard HP NetServer/HP System Board, BIOS 4.06.46 PW 06/25/2003 [154316.118774] Call Trace: [154316.118848] dump_stack+0x48/0x65 [154316.118916] ubsan_epilogue+0xe/0x40 [154316.118976] __ubsan_handle_type_mismatch+0xfb/0x180 [154316.119043] scsi_block_requests+0x20/0x30 [154316.119135] aac_shutdown+0x18/0x40 [aacraid] [154316.119196] pci_device_shutdown+0x33/0x50 [154316.119269] device_shutdown+0x18a/0x390 [...] [154316.123435] BUG: unable to handle kernel NULL pointer dereference at 000000f4 [154316.123515] IP: scsi_block_requests+0xa/0x30 This is because aac_shutdown() does struct Scsi_Host *shost = pci_get_drvdata(dev); scsi_block_requests(shost); and that assumes shost has been assigned with pci_set_drvdata(). However, pci_set_drvdata(pdev, shost) is done in aac_probe_one() far after bailing out with error from calling the init function ((*aac_drivers[index].init)(aac)), and when the init function fails, no error is returned from aac_probe_one() so PCI layer assumes there is driver attached, and tries to shut it down later. Fix it by returning error from aac_probe_one() when card-specific init function fails. This fixes reboot on my HP NetRAID-4M with dead battery. Signed-off-by:
Meelis Roos <mroos@linux.ee> Reviewed-by:
Dave Carroll <david.carroll@microsemi.com> Signed-off-by:
-
Michael Kelley (EOSG) authored
[ Upstream commit cabe92a5 ] Increase cmd_per_lun to allow more I/Os in progress per device, particularly for NVMe's. The Hyper-V host side can handle the higher count with no issues. Signed-off-by:
Michael Kelley <mikelley@microsoft.com> Reviewed-by:
K. Y. Srinivasan <kys@microsoft.com> Acked-by:
-
Anders Roxell authored
[ Upstream commit 9a606f8d ] The memfd test requires to insert the fuse module (CONFIG_FUSE_FS). Signed-off-by:
Anders Roxell <anders.roxell@linaro.org> Signed-off-by:
Daniel Díaz <daniel.diaz@linaro.org> Signed-off-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
-
Vardan Mikayelyan authored
[ Upstream commit 755d7395 ] We should call dwc2_hsotg_enqueue_setup() after properly setting lx_state. Because it may cause error-out from dwc2_hsotg_enqueue_setup() due to wrong value in lx_state. Issue can be reproduced by loading driver while connected A-Connector (start in A-HOST mode) then disconnect A-Connector to switch to B-DEVICE. Acked-by:
John Youn <johnyoun@synopsys.com> Signed-off-by:
Vardan Mikayelyan <mvardan@synopsys.com> Signed-off-by:
Grigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Stefan Agner authored
[ Upstream commit 20c63f40 ] Clang reports the following warning: drivers/usb/gadget/udc/fsl_udc_core.c:1312:10: warning: address of array 'ep->name' will always evaluate to 'true' [-Wpointer-bool-conversion] if (ep->name) ~~ ~~~~^~~~ It seems that the authors intention was to check if the ep has been configured through struct_ep_setup. Check whether struct usb_ep name pointer has been set instead. Signed-off-by:
Stefan Agner <stefan@agner.ch> Signed-off-by:
-
John Keeping authored
[ Upstream commit 8813a59e ] If there are multiple functions associated with a configuration, then the UAC2 interfaces may not start at zero. Set the correct first interface number in the association descriptor so that the audio interfaces are enumerated correctly in this case. Reviewed-by:
Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by:
John Keeping <john@metanate.com> Signed-off-by:
-
Ulf Magnusson authored
[ Upstream commit 827cc2fa ] 'default N' should be 'default n', though they happen to have the same effect here, due to undefined symbols (N in this case) evaluating to n in a tristate sense. Remove the default from ARC_EMUL_UNALIGNED instead of changing it. bool and tristate symbols implicitly default to n. Discovered with the https://urldefense.proofpoint.com/v2/url?u=https-3A__github.com_ulfalizer_Kconfiglib_blob_master_examples_list-5Fundefined.py&d=DwIBAg&c=DPL6_X_6JkXFx7AXWqB0tg&r=c14YS-cH-kdhTOW89KozFhBtBJgs1zXscZojEZQ0THs&m=WxxD8ozR7QQUVzNCBksiznaisBGO_crN7PBOvAoju8s&s=1LmxsNqxwT-7wcInVpZ6Z1J27duZKSoyKxHIJclXU_M&e= script. Signed-off-by:
Ulf Magnusson <ulfalizer@gmail.com> Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Bart Van Assche authored
[ Upstream commit c02189e1 ] A left shift must shift less than the bit width of the left argument. Avoid triggering undefined behavior if ha->mbx_count == 32. This patch avoids that UBSAN reports the following complaint: UBSAN: Undefined behaviour in drivers/scsi/qla2xxx/qla_isr.c:275:14 shift exponent 32 is too large for 32-bit type 'int' Call Trace: dump_stack+0x4e/0x6c ubsan_epilogue+0xd/0x3b __ubsan_handle_shift_out_of_bounds+0x112/0x14c qla2x00_mbx_completion+0x1c5/0x25d [qla2xxx] qla2300_intr_handler+0x1ea/0x3bb [qla2xxx] qla2x00_mailbox_command+0x77b/0x139a [qla2xxx] qla2x00_mbx_reg_test+0x83/0x114 [qla2xxx] qla2x00_chip_diag+0x354/0x45f [qla2xxx] qla2x00_initialize_adapter+0x2c2/0xa4e [qla2xxx] qla2x00_probe_one+0x1681/0x392e [qla2xxx] pci_device_probe+0x10b/0x1f1 driver_probe_device+0x21f/0x3a4 __driver_attach+0xa9/0xe1 bus_for_each_dev+0x6e/0xb5 driver_attach+0x22/0x3c bus_add_driver+0x1d1/0x2ae driver_register+0x78/0x130 __pci_register_driver+0x75/0xa8 qla2x00_module_init+0x21b/0x267 [qla2xxx] do_one_initcall+0x5a/0x1e2 do_init_module+0x9d/0x285 load_module+0x20db/0x38e3 SYSC_finit_module+0xa8/0xbc SyS_finit_module+0x9/0xb do_syscall_64+0x77/0x271 entry_SYSCALL64_slow_path+0x25/0x25 Reported-by:
Bart Van Assche <bart.vanassche@wdc.com> Cc: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by:
Laurence Oberman <loberman@redhat.com> Acked-by:
Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit a7043e95 ] My static checker complains about an out of bounds read: drivers/message/fusion/mptctl.c:2786 mptctl_hp_targetinfo() error: buffer overflow 'hd->sel_timeout' 255 <= u32max. It's true that we probably should have a bounds check here. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit e6f791d9 ] We wanted to exit the loop with "div" set to zero, but instead, if we don't hit the break then "div" is -1 when we finish the loop. It leads to an array underflow a few lines later. Signed-off-by:
Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by:
-
Chad Dupuis authored
[ Upstream commit ecf7ff49 ] When a request times out we set the io_req flag BNX2FC_FLAG_IO_COMPL so that if a subsequent completion comes in on that task ID we will ignore it. The issue is that in the check for this flag there is a missing return so we will continue to process a request which may have already been returned to the ownership of the SCSI layer. This can cause unpredictable results. Solution is to add in the missing return. [mkp: typo plus title shortening] Signed-off-by:
Chad Dupuis <chad.dupuis@cavium.com> Reviewed-by:
-
Sujit Reddy Thumma authored
[ Upstream commit 84af7e8b ] WRITE_SAME command is not supported by UFS. Enable a quirk for the upper level drivers to not send WRITE SAME command. [mkp: botched patch, applied by hand] Signed-off-by:
Sujit Reddy Thumma <sthumma@codeaurora.org> Signed-off-by:
Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by:
Asutosh Das <asutoshd@codeaurora.org> Signed-off-by:
-
Mark Salter authored
[ Upstream commit b6dd4d83 ] The pr_debug() in gic-v3 gic_send_sgi() can trigger a circular locking warning: GICv3: CPU10: ICC_SGI1R_EL1 5000400 ====================================================== WARNING: possible circular locking dependency detected 4.15.0+ #1 Tainted: G W ------------------------------------------------------ dynamic_debug01/1873 is trying to acquire lock: ((console_sem).lock){-...}, at: [<0000000099c891ec>] down_trylock+0x20/0x4c but task is already holding lock: (&rq->lock){-.-.}, at: [<00000000842e1587>] __task_rq_lock+0x54/0xdc which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&rq->lock){-.-.}: __lock_acquire+0x3b4/0x6e0 lock_acquire+0xf4/0x2a8 _raw_spin_lock+0x4c/0x60 task_fork_fair+0x3c/0x148 sched_fork+0x10c/0x214 copy_process.isra.32.part.33+0x4e8/0x14f0 _do_fork+0xe8/0x78c kernel_thread+0x48/0x54 rest_init+0x34/0x2a4 start_kernel+0x45c/0x488 -> #1 (&p->pi_lock){-.-.}: __lock_acquire+0x3b4/0x6e0 lock_acquire+0xf4/0x2a8 _raw_spin_lock_irqsave+0x58/0x70 try_to_wake_up+0x48/0x600 wake_up_process+0x28/0x34 __up.isra.0+0x60/0x6c up+0x60/0x68 __up_console_sem+0x4c/0x7c console_unlock+0x328/0x634 vprintk_emit+0x25c/0x390 dev_vprintk_emit+0xc4/0x1fc dev_printk_emit+0x88/0xa8 __dev_printk+0x58/0x9c _dev_info+0x84/0xa8 usb_new_device+0x100/0x474 hub_port_connect+0x280/0x92c hub_event+0x740/0xa84 process_one_work+0x240/0x70c worker_thread+0x60/0x400 kthread+0x110/0x13c ret_from_fork+0x10/0x18 -> #0 ((console_sem).lock){-...}: validate_chain.isra.34+0x6e4/0xa20 __lock_acquire+0x3b4/0x6e0 lock_acquire+0xf4/0x2a8 _raw_spin_lock_irqsave+0x58/0x70 down_trylock+0x20/0x4c __down_trylock_console_sem+0x3c/0x9c console_trylock+0x20/0xb0 vprintk_emit+0x254/0x390 vprintk_default+0x58/0x90 vprintk_func+0xbc/0x164 printk+0x80/0xa0 __dynamic_pr_debug+0x84/0xac gic_raise_softirq+0x184/0x18c smp_cross_call+0xac/0x218 smp_send_reschedule+0x3c/0x48 resched_curr+0x60/0x9c check_preempt_curr+0x70/0xdc wake_up_new_task+0x310/0x470 _do_fork+0x188/0x78c SyS_clone+0x44/0x50 __sys_trace_return+0x0/0x4 other info that might help us debug this: Chain exists of: (console_sem).lock --> &p->pi_lock --> &rq->lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&rq->lock); lock(&p->pi_lock); lock(&rq->lock); lock((console_sem).lock); *** DEADLOCK *** 2 locks held by dynamic_debug01/1873: #0: (&p->pi_lock){-.-.}, at: [<000000001366df53>] wake_up_new_task+0x40/0x470 #1: (&rq->lock){-.-.}, at: [<00000000842e1587>] __task_rq_lock+0x54/0xdc stack backtrace: CPU: 10 PID: 1873 Comm: dynamic_debug01 Tainted: G W 4.15.0+ #1 Hardware name: GIGABYTE R120-T34-00/MT30-GS2-00, BIOS T48 10/02/2017 Call trace: dump_backtrace+0x0/0x188 show_stack+0x24/0x2c dump_stack+0xa4/0xe0 print_circular_bug.isra.31+0x29c/0x2b8 check_prev_add.constprop.39+0x6c8/0x6dc validate_chain.isra.34+0x6e4/0xa20 __lock_acquire+0x3b4/0x6e0 lock_acquire+0xf4/0x2a8 _raw_spin_lock_irqsave+0x58/0x70 down_trylock+0x20/0x4c __down_trylock_console_sem+0x3c/0x9c console_trylock+0x20/0xb0 vprintk_emit+0x254/0x390 vprintk_default+0x58/0x90 vprintk_func+0xbc/0x164 printk+0x80/0xa0 __dynamic_pr_debug+0x84/0xac gic_raise_softirq+0x184/0x18c smp_cross_call+0xac/0x218 smp_send_reschedule+0x3c/0x48 resched_curr+0x60/0x9c check_preempt_curr+0x70/0xdc wake_up_new_task+0x310/0x470 _do_fork+0x188/0x78c SyS_clone+0x44/0x50 __sys_trace_return+0x0/0x4 GICv3: CPU0: ICC_SGI1R_EL1 12000 This could be fixed with printk_deferred() but that might lessen its usefulness for debugging. So change it to pr_devel to keep it out of production kernels. Developers working on gic-v3 can enable it as needed in their kernels. Signed-off-by:
Mark Salter <msalter@redhat.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Will Deacon authored
[ Upstream commit 11dc1322 ] When queuing on the qspinlock, the count field for the current CPU's head node is incremented. This needn't be atomic because locking in e.g. IRQ context is balanced and so an IRQ will return with node->count as it found it. However, the compiler could in theory reorder the initialisation of node[idx] before the increment of the head node->count, causing an IRQ to overwrite the initialised node and potentially corrupt the lock state. Avoid the potential for this harmful compiler reordering by placing a barrier() between the increment of the head node->count and the subsequent node initialisation. Signed-off-by:
Will Deacon <will.deacon@arm.com> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1518528177-19169-3-git-send-email-will.deacon@arm.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Jesper Dangaard Brouer authored
[ Upstream commit e3d91b0c ] V3: More generic skipping of relo-section (suggested by Daniel) If clang >= 4.0.1 is missing the option '-target bpf', it will cause llc/llvm to create two ELF sections for "Exception Frames", with section names '.eh_frame' and '.rel.eh_frame'. The BPF ELF loader library libbpf fails when loading files with these sections. The other in-kernel BPF ELF loader in samples/bpf/bpf_load.c, handle this gracefully. And iproute2 loader also seems to work with these "eh" sections. The issue in libbpf is caused by bpf_object__elf_collect() skipping some sections, and later when performing relocation it will be pointing to a skipped section, as these sections cannot be found by bpf_object__find_prog_by_idx() in bpf_object__collect_reloc(). This is a general issue that also occurs for other sections, like debug sections which are also skipped and can have relo section. As suggested by Daniel. To avoid keeping state about all skipped sections, instead perform a direct qlookup in the ELF object. Lookup the section that the relo-section points to and check if it contains executable machine instructions (denoted by the sh_flags SHF_EXECINSTR). Use this check to also skip irrelevant relo-sections. Note, for samples/bpf/ the '-target bpf' parameter to clang cannot be used due to incompatibility with asm embedded headers, that some of the samples include. This is explained in more details by Yonghong Song in bpf_devel_QA. Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Tang Junhui authored
[ Upstream commit 7f4fc93d ] I attach a back-end device to a cache set, and the cache set is not registered yet, this back-end device did not attach successfully, and no error returned: [root]# echo 87859280-fec6-4bcc-20df7ca8f86b > /sys/block/sde/bcache/attach [root]# In sysfs_attach(), the return value "v" is initialized to "size" in the beginning, and if no cache set exist in bch_cache_sets, the "v" value would not change any more, and return to sysfs, sysfs regard it as success since the "size" is a positive number. This patch fixes this issue by assigning "v" with "-ENOENT" in the initialization. Signed-off-by:
Tang Junhui <tang.junhui@zte.com.cn> Reviewed-by:
Michael Lyle <mlyle@lyle.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Tang Junhui authored
[ Upstream commit 73ac105b ] back-end device sdm has already attached a cache_set with ID f67ebe1f-f8bc-4d73-bfe5-9dc88607f119, then try to attach with another cache set, and it returns with an error: [root]# cd /sys/block/sdm/bcache [root]# echo 5ccd0a63-148e-48b8-afa2-aca9cbd6279f > attach -bash: echo: write error: Invalid argument After that, execute a command to modify the label of bcache device: [root]# echo data_disk1 > label Then we reboot the system, when the system power on, the back-end device can not attach to cache_set, a messages show in the log: Feb 5 12:05:52 ceph152 kernel: [922385.508498] bcache: bch_cached_dev_attach() couldn't find uuid for sdm in set In sysfs_attach(), dc->sb.set_uuid was assigned to the value which input through sysfs, no matter whether it is success or not in bch_cached_dev_attach(). For example, If the back-end device has already attached to an cache set, bch_cached_dev_attach() would fail, but dc->sb.set_uuid was changed. Then modify the label of bcache device, it will call bch_write_bdev_super(), which would write the dc->sb.set_uuid to the super block, so we record a wrong cache set ID in the super block, after the system reboot, the cache set couldn't find the uuid of the back-end device, so the bcache device couldn't exist and use any more. In this patch, we don't assigned cache set ID to dc->sb.set_uuid in sysfs_attach() directly, but input it into bch_cached_dev_attach(), and assigned dc->sb.set_uuid to the cache set ID after the back-end device attached to the cache set successful. Signed-off-by:
-
Tang Junhui authored
[ Upstream commit 682811b3 ] After long time running of random small IO writing, I reboot the machine, and after the machine power on, I found bcache got stuck, the stack is: [root@ceph153 ~]# cat /proc/2510/task/*/stack [<ffffffffa06b2455>] closure_sync+0x25/0x90 [bcache] [<ffffffffa06b6be8>] bch_journal+0x118/0x2b0 [bcache] [<ffffffffa06b6dc7>] bch_journal_meta+0x47/0x70 [bcache] [<ffffffffa06be8f7>] bch_prio_write+0x237/0x340 [bcache] [<ffffffffa06a8018>] bch_allocator_thread+0x3c8/0x3d0 [bcache] [<ffffffff810a631f>] kthread+0xcf/0xe0 [<ffffffff8164c318>] ret_from_fork+0x58/0x90 [<ffffffffffffffff>] 0xffffffffffffffff [root@ceph153 ~]# cat /proc/2038/task/*/stack [<ffffffffa06b1abd>] __bch_btree_map_nodes+0x12d/0x150 [bcache] [<ffffffffa06b1bd1>] bch_btree_insert+0xf1/0x170 [bcache] [<ffffffffa06b637f>] bch_journal_replay+0x13f/0x230 [bcache] [<ffffffffa06c75fe>] run_cache_set+0x79a/0x7c2 [bcache] [<ffffffffa06c0cf8>] register_bcache+0xd48/0x1310 [bcache] [<ffffffff812f702f>] kobj_attr_store+0xf/0x20 [<ffffffff8125b216>] sysfs_write_file+0xc6/0x140 [<ffffffff811dfbfd>] vfs_write+0xbd/0x1e0 [<ffffffff811e069f>] SyS_write+0x7f/0xe0 [<ffffffff8164c3c9>] system_call_fastpath+0x16/0x1 The stack shows the register thread and allocator thread were getting stuck when registering cache device. I reboot the machine several times, the issue always exsit in this machine. I debug the code, and found the call trace as bellow: register_bcache() ==>run_cache_set() ==>bch_journal_replay() ==>bch_btree_insert() ==>__bch_btree_map_nodes() ==>btree_insert_fn() ==>btree_split() //node need split ==>btree_check_reserve() In btree_check_reserve(), It will check if there is enough buckets of RESERVE_BTREE type, since allocator thread did not work yet, so no buckets of RESERVE_BTREE type allocated, so the register thread waits on c->btree_cache_wait, and goes to sleep. Then the allocator thread initialized, the call trace is bellow: bch_allocator_thread() ==>bch_prio_write() ==>bch_journal_meta() ==>bch_journal() ==>journal_wait_for_write() In journal_wait_for_write(), It will check if journal is full by journal_full(), but the long time random small IO writing causes the exhaustion of journal buckets(journal.blocks_free=0), In order to release the journal buckets, the allocator calls btree_flush_write() to flush keys to btree nodes, and waits on c->journal.wait until btree nodes writing over or there has already some journal buckets space, then the allocator thread goes to sleep. but in btree_flush_write(), since bch_journal_replay() is not finished, so no btree nodes have journal (condition "if (btree_current_write(b)->journal)" never satisfied), so we got no btree node to flush, no journal bucket released, and allocator sleep all the times. Through the above analysis, we can see that: 1) Register thread wait for allocator thread to allocate buckets of RESERVE_BTREE type; 2) Alloctor thread wait for register thread to replay journal, so it can flush btree nodes and get journal bucket. then they are all got stuck by waiting for each other. Hua Rui provided a patch for me, by allocating some buckets of RESERVE_BTREE type in advance, so the register thread can get bucket when btree node splitting and no need to waiting for the allocator thread. I tested it, it has effect, and register thread run a step forward, but finally are still got stuck, the reason is only 8 bucket of RESERVE_BTREE type were allocated, and in bch_journal_replay(), after 2 btree nodes splitting, only 4 bucket of RESERVE_BTREE type left, then btree_check_reserve() is not satisfied anymore, so it goes to sleep again, and in the same time, alloctor thread did not flush enough btree nodes to release a journal bucket, so they all got stuck again. So we need to allocate more buckets of RESERVE_BTREE type in advance, but how much is enough? By experience and test, I think it should be as much as journal buckets. Then I modify the code as this patch, and test in the machine, and it works. This patch modified base on Hua Rui’s patch, and allocate more buckets of RESERVE_BTREE type in advance to avoid register thread and allocate thread going to wait for each other. [patch v2] ca->sb.njournal_buckets would be 0 in the first time after cache creation, and no journal exists, so just 8 btree buckets is OK. Signed-off-by:
Hua Rui <huarui.dev@gmail.com> Signed-off-by:
-
Coly Li authored
[ Upstream commit 99361bbf ] Kernel thread routine bch_writeback_thread() has the following code block, 447 down_write(&dc->writeback_lock); 448~450 if (check conditions) { 451 up_write(&dc->writeback_lock); 452 set_current_state(TASK_INTERRUPTIBLE); 453 454 if (kthread_should_stop()) 455 return 0; 456 457 schedule(); 458 continue; 459 } If condition check is true, its task state is set to TASK_INTERRUPTIBLE and call schedule() to wait for others to wake up it. There are 2 issues in current code, 1, Task state is set to TASK_INTERRUPTIBLE after the condition checks, if another process changes the condition and call wake_up_process(dc-> writeback_thread), then at line 452 task state is set back to TASK_INTERRUPTIBLE, the writeback kernel thread will lose a chance to be waken up. 2, At line 454 if kthread_should_stop() is true, writeback kernel thread will return to kernel/kthread.c:kthread() with TASK_INTERRUPTIBLE and call do_exit(). It is not good to enter do_exit() with task state TASK_INTERRUPTIBLE, in following code path might_sleep() is called and a warning message is reported by __might_sleep(): "WARNING: do not call blocking ops when !TASK_RUNNING; state=1 set at [xxxx]". For the first issue, task state should be set before condition checks. Ineed because dc->writeback_lock is required when modifying all the conditions, calling set_current_state() inside code block where dc-> writeback_lock is hold is safe. But this is quite implicit, so I still move set_current_state() before all the condition checks. For the second issue, frankley speaking it does not hurt when kernel thread exits with TASK_INTERRUPTIBLE state, but this warning message scares users, makes them feel there might be something risky with bcache and hurt their data. Setting task state to TASK_RUNNING before returning fixes this problem. In alloc.c:allocator_wait(), there is also a similar issue, and is also fixed in this patch. Changelog: v3: merge two similar fixes into one patch v2: fix the race issue in v1 patch. v1: initial buggy fix. Signed-off-by:
Coly Li <colyli@suse.de> Reviewed-by:
Hannes Reinecke <hare@suse.de> Reviewed-by:
-
Arnd Bergmann authored
[ Upstream commit ade7db99 ] This bug was fixed before, but came up again with the latest compiler in another function: fs/cifs/cifssmb.c: In function 'CIFSSMBSetEA': fs/cifs/cifssmb.c:6362:3: error: 'strncpy' offset 8 is out of the bounds [0, 4] [-Werror=array-bounds] strncpy(parm_data->list[0].name, ea_name, name_len); Let's apply the same fix that was used for the other instances. Fixes: b2a3ad9c ("cifs: silence compiler warnings showing up with gcc-4.7.0") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Alexey Dobriyan authored
[ Upstream commit ac7f1061 ] Current code does: if (sscanf(dentry->d_name.name, "%lx-%lx", start, end) != 2) However sscanf() is broken garbage. It silently accepts whitespace between format specifiers (did you know that?). It silently accepts valid strings which result in integer overflow. Do not use sscanf() for any even remotely reliable parsing code. OK # readlink '/proc/1/map_files/55a23af39000-55a23b05b000' /lib/systemd/systemd broken # readlink '/proc/1/map_files/ 55a23af39000-55a23b05b000' /lib/systemd/systemd broken # readlink '/proc/1/map_files/55a23af39000-55a23b05b000 ' /lib/systemd/systemd very broken # readlink '/proc/1/map_files/1000000000000000055a23af39000-55a23b05b000' /lib/systemd/systemd Andrei said: : This patch breaks criu. It was a bug in criu. And this bug is on a minor : path, which works when memfd_create() isn't available. It is a reason why : I ask to not backport this patch to stable kernels. : : In CRIU this bug can be triggered, only if this patch will be backported : to a kernel which version is lower than v3.16. Link: http://lkml.kernel.org/r/20171120212706.GA14325@avx2Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Andrei Vagin <avagin@virtuozzo.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Will Deacon authored
[ Upstream commit 202fb4ef ] If the spinlock "next" ticket wraps around between the initial LDR and the cmpxchg in the LSE version of spin_trylock, then we can erroneously think that we have successfuly acquired the lock because we only check whether the next ticket return by the cmpxchg is equal to the owner ticket in our updated lock word. This patch fixes the issue by performing a full 32-bit check of the lock word when trying to determine whether or not the CASA instruction updated memory. Reported-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Guanglei Li authored
[ Upstream commit 2c0aa086 ] Scenario: 1. Port down and do fail over 2. Ap do rds_bind syscall PID: 47039 TASK: ffff89887e2fe640 CPU: 47 COMMAND: "kworker/u:6" #0 [ffff898e35f159f0] machine_kexec at ffffffff8103abf9 #1 [ffff898e35f15a60] crash_kexec at ffffffff810b96e3 #2 [ffff898e35f15b30] oops_end at ffffffff8150f518 #3 [ffff898e35f15b60] no_context at ffffffff8104854c #4 [ffff898e35f15ba0] __bad_area_nosemaphore at ffffffff81048675 #5 [ffff898e35f15bf0] bad_area_nosemaphore at ffffffff810487d3 #6 [ffff898e35f15c00] do_page_fault at ffffffff815120b8 #7 [ffff898e35f15d10] page_fault at ffffffff8150ea95 [exception RIP: unknown or invalid address] RIP: 0000000000000000 RSP: ffff898e35f15dc8 RFLAGS: 00010282 RAX: 00000000fffffffe RBX: ffff889b77f6fc00 RCX:ffffffff81c99d88 RDX: 0000000000000000 RSI: ffff896019ee08e8 RDI:ffff889b77f6fc00 RBP: ffff898e35f15df0 R8: ffff896019ee08c8 R9:0000000000000000 R10: 0000000000000400 R11: 0000000000000000 R12:ffff896019ee08c0 R13: ffff889b77f6fe68 R14: ffffffff81c99d80 R15: ffffffffa022a1e0 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #8 [ffff898e35f15dc8] cma_ndev_work_handler at ffffffffa022a228 [rdma_cm] #9 [ffff898e35f15df8] process_one_work at ffffffff8108a7c6 #10 [ffff898e35f15e58] worker_thread at ffffffff8108bda0 #11 [ffff898e35f15ee8] kthread at ffffffff81090fe6 PID: 45659 TASK: ffff880d313d2500 CPU: 31 COMMAND: "oracle_45659_ap" #0 [ffff881024ccfc98] __schedule at ffffffff8150bac4 #1 [ffff881024ccfd40] schedule at ffffffff8150c2cf #2 [ffff881024ccfd50] __mutex_lock_slowpath at ffffffff8150cee7 #3 [ffff881024ccfdc0] mutex_lock at ffffffff8150cdeb #4 [ffff881024ccfde0] rdma_destroy_id at ffffffffa022a027 [rdma_cm] #5 [ffff881024ccfe10] rds_ib_laddr_check at ffffffffa0357857 [rds_rdma] #6 [ffff881024ccfe50] rds_trans_get_preferred at ffffffffa0324c2a [rds] #7 [ffff881024ccfe80] rds_bind at ffffffffa031d690 [rds] #8 [ffff881024ccfeb0] sys_bind at ffffffff8142a670 PID: 45659 PID: 47039 rds_ib_laddr_check /* create id_priv with a null event_handler */ rdma_create_id rdma_bind_addr cma_acquire_dev /* add id_priv to cma_dev->id_list */ cma_attach_to_dev cma_ndev_work_handler /* event_hanlder is null */ id_priv->id.event_handler Signed-off-by:
Guanglei Li <guanglei.li@oracle.com> Signed-off-by:
Honglei Wang <honglei.wang@oracle.com> Reviewed-by:
Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by:
Yanjun Zhu <yanjun.zhu@oracle.com> Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Acked-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Ross Lagerwall authored
[ Upstream commit 3ac7292a ] The page given to gnttab_end_foreign_access() to free could be a compound page so use put_page() instead of free_page() since it can handle both compound and single pages correctly. This bug was discovered when migrating a Xen VM with several VIFs and CONFIG_DEBUG_VM enabled. It hits a BUG usually after fewer than 10 iterations. All netfront devices disconnect from the backend during a suspend/resume and this will call gnttab_end_foreign_access() if a netfront queue has an outstanding skb. The mismatch between calling get_page() and free_page() on a compound page causes a reference counting error which is detected when DEBUG_VM is enabled. Signed-off-by:
Ross Lagerwall <ross.lagerwall@citrix.com> Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
-
Ross Lagerwall authored
[ Upstream commit f599c64f ] When a netfront device is set up it registers a netdev fairly early on, before it has set up the queues and is actually usable. A userspace tool like NetworkManager will immediately try to open it and access its state as soon as it appears. The bug can be reproduced by hotplugging VIFs until the VM runs out of grant refs. It registers the netdev but fails to set up any queues (since there are no more grant refs). In the meantime, NetworkManager opens the device and the kernel crashes trying to access the queues (of which there are none). Fix this in two ways: * For initial setup, register the netdev much later, after the queues are setup. This avoids the race entirely. * During a suspend/resume cycle, the frontend reconnects to the backend and the queues are recreated. It is possible (though highly unlikely) to race with something opening the device and accessing the queues after they have been destroyed but before they have been recreated. Extend the region covered by the rtnl semaphore to protect against this race. There is a possibility that we fail to recreate the queues so check for this in the open function. Signed-off-by:
-
Matt Redfearn authored
[ Upstream commit 0cde5b44 ] When commit b27311e1 ("MIPS: TXx9: Add RBTX4939 board support") added board support for the RBTX4939, it added a call to led_classdev_register even if the LED class is built as a module. Built-in arch code cannot call module code directly like this. Commit b33b4407 ("MIPS: TXX9: use IS_ENABLED() macro") subsequently changed the inclusion of this code to a single check that CONFIG_LEDS_CLASS is either builtin or a module, but the same issue remains. This leads to MIPS allmodconfig builds failing when CONFIG_MACH_TX49XX=y is set: arch/mips/txx9/rbtx4939/setup.o: In function `rbtx4939_led_probe': setup.c:(.init.text+0xc0): undefined reference to `of_led_classdev_register' make: *** [Makefile:999: vmlinux] Error 1 Fix this by using the IS_BUILTIN() macro instead. Fixes: b27311e1 ("MIPS: TXx9: Add RBTX4939 board support") Signed-off-by:
Matt Redfearn <matt.redfearn@mips.com> Reviewed-by:
James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/18544/Signed-off-by:
-
Yonghong Song authored
[ Upstream commit 09584b40 ] With CONFIG_BPF_JIT_ALWAYS_ON is defined in the config file, tools/testing/selftests/bpf/test_kmod.sh failed like below: [root@localhost bpf]# ./test_kmod.sh sysctl: setting key "net.core.bpf_jit_enable": Invalid argument [ JIT enabled:0 hardened:0 ] [ 132.175681] test_bpf: #297 BPF_MAXINSNS: Jump, gap, jump, ... FAIL to prog_create err=-524 len=4096 [ 132.458834] test_bpf: Summary: 348 PASSED, 1 FAILED, [340/340 JIT'ed] [ JIT enabled:1 hardened:0 ] [ 133.456025] test_bpf: #297 BPF_MAXINSNS: Jump, gap, jump, ... FAIL to prog_create err=-524 len=4096 [ 133.730935] test_bpf: Summary: 348 PASSED, 1 FAILED, [340/340 JIT'ed] [ JIT enabled:1 hardened:1 ] [ 134.769730] test_bpf: #297 BPF_MAXINSNS: Jump, gap, jump, ... FAIL to prog_create err=-524 len=4096 [ 135.050864] test_bpf: Summary: 348 PASSED, 1 FAILED, [340/340 JIT'ed] [ JIT enabled:1 hardened:2 ] [ 136.442882] test_bpf: #297 BPF_MAXINSNS: Jump, gap, jump, ... FAIL to prog_create err=-524 len=4096 [ 136.821810] test_bpf: Summary: 348 PASSED, 1 FAILED, [340/340 JIT'ed] [root@localhost bpf]# The test_kmod.sh load/remove test_bpf.ko multiple times with different settings for sysctl net.core.bpf_jit_{enable,harden}. The failed test #297 of test_bpf.ko is designed such that JIT always fails. Commit 290af866 (bpf: introduce BPF_JIT_ALWAYS_ON config) introduced the following tightening logic: ... if (!bpf_prog_is_dev_bound(fp->aux)) { fp = bpf_int_jit_compile(fp); #ifdef CONFIG_BPF_JIT_ALWAYS_ON if (!fp->jited) { *err = -ENOTSUPP; return fp; } #endif ... With this logic, Test #297 always gets return value -ENOTSUPP when CONFIG_BPF_JIT_ALWAYS_ON is defined, causing the test failure. This patch fixed the failure by marking Test #297 as expected failure when CONFIG_BPF_JIT_ALWAYS_ON is defined. Fixes: 290af866 (bpf: introduce BPF_JIT_ALWAYS_ON config) Signed-off-by:
Yonghong Song <yhs@fb.com> Signed-off-by:
-
Chen Yu authored
[ Upstream commit ba1edb9a ] The following warning was triggered after resumed from S3 - if all the nonboot CPUs were put offline before suspend: [ 1840.329515] unchecked MSR access error: RDMSR from 0x771 at rIP: 0xffffffff86061e3a (native_read_msr+0xa/0x30) [ 1840.329516] Call Trace: [ 1840.329521] __rdmsr_on_cpu+0x33/0x50 [ 1840.329525] generic_exec_single+0x81/0xb0 [ 1840.329527] smp_call_function_single+0xd2/0x100 [ 1840.329530] ? acpi_ds_result_pop+0xdd/0xf2 [ 1840.329532] ? acpi_ds_create_operand+0x215/0x23c [ 1840.329534] rdmsrl_on_cpu+0x57/0x80 [ 1840.329536] ? cpumask_next+0x1b/0x20 [ 1840.329538] ? rdmsrl_on_cpu+0x57/0x80 [ 1840.329541] intel_pstate_update_perf_limits+0xf3/0x220 [ 1840.329544] ? notifier_call_chain+0x4a/0x70 [ 1840.329546] intel_pstate_set_policy+0x4e/0x150 [ 1840.329548] cpufreq_set_policy+0xcd/0x2f0 [ 1840.329550] cpufreq_update_policy+0xb2/0x130 [ 1840.329552] ? cpufreq_update_policy+0x130/0x130 [ 1840.329556] acpi_processor_ppc_has_changed+0x65/0x80 [ 1840.329558] acpi_processor_notify+0x80/0x100 [ 1840.329561] acpi_ev_notify_dispatch+0x44/0x5c [ 1840.329563] acpi_os_execute_deferred+0x14/0x20 [ 1840.329565] process_one_work+0x193/0x3c0 [ 1840.329567] worker_thread+0x35/0x3b0 [ 1840.329569] kthread+0x125/0x140 [ 1840.329571] ? process_one_work+0x3c0/0x3c0 [ 1840.329572] ? kthread_park+0x60/0x60 [ 1840.329575] ? do_syscall_64+0x67/0x180 [ 1840.329577] ret_from_fork+0x25/0x30 [ 1840.329585] unchecked MSR access error: WRMSR to 0x774 (tried to write 0x0000000000000000) at rIP: 0xffffffff86061f78 (native_write_msr+0x8/0x30) [ 1840.329586] Call Trace: [ 1840.329587] __wrmsr_on_cpu+0x37/0x40 [ 1840.329589] generic_exec_single+0x81/0xb0 [ 1840.329592] smp_call_function_single+0xd2/0x100 [ 1840.329594] ? acpi_ds_create_operand+0x215/0x23c [ 1840.329595] ? cpumask_next+0x1b/0x20 [ 1840.329597] wrmsrl_on_cpu+0x57/0x70 [ 1840.329598] ? rdmsrl_on_cpu+0x57/0x80 [ 1840.329599] ? wrmsrl_on_cpu+0x57/0x70 [ 1840.329602] intel_pstate_hwp_set+0xd3/0x150 [ 1840.329604] intel_pstate_set_policy+0x119/0x150 [ 1840.329606] cpufreq_set_policy+0xcd/0x2f0 [ 1840.329607] cpufreq_update_policy+0xb2/0x130 [ 1840.329610] ? cpufreq_update_policy+0x130/0x130 [ 1840.329613] acpi_processor_ppc_has_changed+0x65/0x80 [ 1840.329615] acpi_processor_notify+0x80/0x100 [ 1840.329617] acpi_ev_notify_dispatch+0x44/0x5c [ 1840.329619] acpi_os_execute_deferred+0x14/0x20 [ 1840.329620] process_one_work+0x193/0x3c0 [ 1840.329622] worker_thread+0x35/0x3b0 [ 1840.329624] kthread+0x125/0x140 [ 1840.329625] ? process_one_work+0x3c0/0x3c0 [ 1840.329626] ? kthread_park+0x60/0x60 [ 1840.329628] ? do_syscall_64+0x67/0x180 [ 1840.329631] ret_from_fork+0x25/0x30 This is because if there's only one online CPU, the MSR_PM_ENABLE (package wide)can not be enabled after resumed, due to intel_pstate_hwp_enable() will only be invoked on AP's online process after resumed - if there's no AP online, the HWP remains disabled after resumed (BIOS has disabled it in S3). Then if there comes a _PPC change notification which touches HWP register during this stage, the warning is triggered. Since we don't call acpi_processor_register_performance() when HWP is enabled, the pr->performance will be NULL. When this is NULL we don't need to do _PPC change notification. Reported-by:
Doug Smythies <dsmythies@telus.net> Suggested-by:
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by:
Yu Chen <yu.c.chen@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Jean Delvare authored
[ Upstream commit a7770ae1 ] The handling of empty DMI strings looks quite broken to me: * Strings from 1 to 7 spaces are not considered empty. * True empty DMI strings (string index set to 0) are not considered empty, and result in allocating a 0-char string. * Strings with invalid index also result in allocating a 0-char string. * Strings starting with 8 spaces are all considered empty, even if non-space characters follow (sounds like a weird thing to do, but I have actually seen occurrences of this in DMI tables before.) * Strings which are considered empty are reported as 8 spaces, instead of being actually empty. Some of these issues are the result of an off-by-one error in memcmp, the rest is incorrect by design. So let's get it square: missing strings and strings made of only spaces, regardless of their length, should be treated as empty and no memory should be allocated for them. All other strings are non-empty and should be allocated. Signed-off-by:
Jean Delvare <jdelvare@suse.de> Fixes: 79da4721 ("x86: fix DMI out of memory problems") Cc: Parag Warudkar <parag.warudkar@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 328008a7 ] The declaration for swsusp_arch_resume marks it as 'asmlinkage', but the definition in x86-32 does not, and it fails to include the header with the declaration. This leads to a warning when building with link-time-optimizations: kernel/power/power.h:108:23: error: type of 'swsusp_arch_resume' does not match original declaration [-Werror=lto-type-mismatch] extern asmlinkage int swsusp_arch_resume(void); ^ arch/x86/power/hibernate_32.c:148:0: note: 'swsusp_arch_resume' was previously declared here int swsusp_arch_resume(void) This moves the declaration into a globally visible header file and fixes up both x86 definitions to match it. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Len Brown <len.brown@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Nicolas Pitre <nico@linaro.org> Cc: linux-pm@vger.kernel.org Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Pavel Machek <pavel@ucw.cz> Cc: Bart Van Assche <bart.vanassche@wdc.com> Link: https://lkml.kernel.org/r/20180202145634.200291-2-arnd@arndb.deSigned-off-by:
-
Alex Estrin authored
[ Upstream commit 10293610 ] On reboot SM can program port pkey table before ipoib registered its event handler, which could result in missing pkey event and leave root interface with initial pkey value from index 0. Since OPA port starts with invalid pkey in index 0, root interface will fail to initialize and stay down with no-carrier flag. For IB ipoib interface may end up with pkey different from value opensm put in pkey table idx 0, resulting in connectivity issues (different mcast groups, for example). Close the window by calling event handler after registration to make sure ipoib pkey is in sync with port pkey table. Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by:
Ira Weiny <ira.weiny@intel.com> Signed-off-by:
Alex Estrin <alex.estrin@intel.com> Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Mel Gorman authored
[ Upstream commit 69d763fc ] Minchan Kim asked the following question -- what locks protects address_space destroying when race happens between inode trauncation and __isolate_lru_page? Jan Kara clarified by describing the race as follows CPU1 CPU2 truncate(inode) __isolate_lru_page() ... truncate_inode_page(mapping, page); delete_from_page_cache(page) spin_lock_irqsave(&mapping->tree_lock, flags); __delete_from_page_cache(page, NULL) page_cache_tree_delete(..) ... mapping = page_mapping(page); page->mapping = NULL; ... spin_unlock_irqrestore(&mapping->tree_lock, flags); page_cache_free_page(mapping, page) put_page(page) if (put_page_testzero(page)) -> false - inode now has no pages and can be freed including embedded address_space if (mapping && !mapping->a_ops->migratepage) - we've dereferenced mapping which is potentially already free. The race is theoretically possible but unlikely. Before the delete_from_page_cache, truncate_cleanup_page is called so the page is likely to be !PageDirty or PageWriteback which gets skipped by the only caller that checks the mappping in __isolate_lru_page. Even if the race occurs, a substantial amount of work has to happen during a tiny window with no preemption but it could potentially be done using a virtual machine to artifically slow one CPU or halt it during the critical window. This patch should eliminate the race with truncation by try-locking the page before derefencing mapping and aborting if the lock was not acquired. There was a suggestion from Huang Ying to use RCU as a side-effect to prevent mapping being freed. However, I do not like the solution as it's an unconventional means of preserving a mapping and it's not a context where rcu_read_lock is obviously protecting rcu data. Link: http://lkml.kernel.org/r/20180104102512.2qos3h5vqzeisrek@techsingularity.net Fixes: c8244935 ("mm: compaction: make isolate_lru_page() filter-aware again") Signed-off-by:
Mel Gorman <mgorman@techsingularity.net> Acked-by:
Minchan Kim <minchan@kernel.org> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jan Kara <jack@suse.cz> Signed-off-by:
-
