Skip to content

L
linux
Switch branch/tag
  1. 30 Sep, 2020 4 commits
    • Jacob Keller's avatar
      ice: increase maximum wait time for flash write commands · 0ec86e8e
      Jacob Keller authored 
      The ice driver needs to wait for a firmware response to each command to
write a block of data to the scratch area used to update the device
firmware. The driver currently waits for up to 1 second for this to be
returned.

It turns out that firmware might take longer than 1 second to return
a completion in some cases. If this happens, the flash update will fail
to complete.

Fix this by increasing the maximum time that the driver will wait for
both writing a block of data, and for activating the new NVM bank. The
timeout for an erase command is already several minutes, as the firmware
had to erase the entire bank which was already expected to take a minute
or more in the worst case.

In the case where firmware really won't respond, we will now take longer
to fail. However, this ensures that if the firmware is simply slow to
respond, the flash update can still complete. This new maximum timeout
should not adversely increase the update time, as the implementation for
wait_event_interruptible_timeout, and should wake very soon after we get
a completion event. It is better for a flash update be slow but still
succeed than to fail because we gave up too quickly.

Fixes: d69ea414 ("ice: implement device flash update via devlink")
Signed-off-by: default avatarJacob Keller <jacob.e.keller@intel.com>
Tested-by: default avatarBrijesh Behera <brijeshx.behera@intel.com>
Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
      0ec86e8e
    • David S. Miller's avatar
      Merge branch 'mptcp-Fix-for-32-bit-DATA_FIN' · 2b3e981a
      David S. Miller authored 
      Mat Martineau says:

====================
mptcp: Fix for 32-bit DATA_FIN

The main fix is contained in patch 2, and that commit message explains
the issue with not properly converting truncated DATA_FIN sequence
numbers sent by the peer.

With patch 2 adding an unlocked read of msk->ack_seq, patch 1 cleans up
access to that data with READ_ONCE/WRITE_ONCE.

This does introduce two merge conflicts with net-next, but both have
straightforward resolution. Patch 1 modifies a line that got removed in
net-next so the modification can be dropped when merging. Patch 2 will
require a trivial conflict resolution for a modified function
declaration.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2b3e981a
    • Mat Martineau's avatar
      mptcp: Handle incoming 32-bit DATA_FIN values · 1a49b2c2
      Mat Martineau authored 
      The peer may send a DATA_FIN mapping with either a 32-bit or 64-bit
sequence number. When a 32-bit sequence number is received for the
DATA_FIN, it must be expanded to 64 bits before comparing it to the
last acked sequence number. This expansion was missing.

Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/93
Fixes: 3721b9b6 ("mptcp: Track received DATA_FIN sequence number and add related helpers")
Signed-off-by: default avatarMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1a49b2c2
    • Mat Martineau's avatar
      mptcp: Consistently use READ_ONCE/WRITE_ONCE with msk->ack_seq · 917944da
      Mat Martineau authored 
      The msk->ack_seq value is sometimes read without the msk lock held, so
make proper use of READ_ONCE and WRITE_ONCE.
Signed-off-by: default avatarMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      917944da
  3. 29 Sep, 2020 15 commits
  5. 28 Sep, 2020 8 commits
    • Manivannan Sadhasivam's avatar
      net: qrtr: ns: Protect radix_tree_deref_slot() using rcu read locks · a7809ff9
      Manivannan Sadhasivam authored 
      The rcu read locks are needed to avoid potential race condition while
dereferencing radix tree from multiple threads. The issue was identified
by syzbot. Below is the crash report:

=============================
WARNING: suspicious RCU usage
5.7.0-syzkaller #0 Not tainted
-----------------------------
include/linux/radix-tree.h:176 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
2 locks held by kworker/u4:1/21:
 #0: ffff88821b097938 ((wq_completion)qrtr_ns_handler){+.+.}-{0:0}, at: spin_unlock_irq include/linux/spinlock.h:403 [inline]
 #0: ffff88821b097938 ((wq_completion)qrtr_ns_handler){+.+.}-{0:0}, at: process_one_work+0x6df/0xfd0 kernel/workqueue.c:2241
 #1: ffffc90000dd7d80 ((work_completion)(&qrtr_ns.work)){+.+.}-{0:0}, at: process_one_work+0x71e/0xfd0 kernel/workqueue.c:2243

stack backtrace:
CPU: 0 PID: 21 Comm: kworker/u4:1 Not tainted 5.7.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: qrtr_ns_handler qrtr_ns_worker
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1e9/0x30e lib/dump_stack.c:118
 radix_tree_deref_slot include/linux/radix-tree.h:176 [inline]
 ctrl_cmd_new_lookup net/qrtr/ns.c:558 [inline]
 qrtr_ns_worker+0x2aff/0x4500 net/qrtr/ns.c:674
 process_one_work+0x76e/0xfd0 kernel/workqueue.c:2268
 worker_thread+0xa7f/0x1450 kernel/workqueue.c:2414
 kthread+0x353/0x380 kernel/kthread.c:268

Fixes: 0c2204a4 ("net: qrtr: Migrate nameservice to kernel from userspace")
Reported-and-tested-by: syzbot+0f84f6eed90503da72fc@syzkaller.appspotmail.com
Signed-off-by: default avatarManivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a7809ff9
    • David S. Miller's avatar
      Merge branch 'net-core-fix-a-lockdep-splat-in-the-dev_addr_list' · 0ba56b89
      David S. Miller authored 
      Taehee Yoo says:

====================
net: core: fix a lockdep splat in the dev_addr_list.

This patchset is to avoid lockdep splat.

When a stacked interface graph is changed, netif_addr_lock() is called
recursively and it internally calls spin_lock_nested().
The parameter of spin_lock_nested() is 'dev->lower_level',
this is called subclass.
The problem of 'dev->lower_level' is that while 'dev->lower_level' is
being used as a subclass of spin_lock_nested(), its value can be changed.
So, spin_lock_nested() would be called recursively with the same
subclass value, the lockdep understands a deadlock.
In order to avoid this, a new variable is needed and it is going to be
used as a parameter of spin_lock_nested().
The first and second patch is a preparation patch for the third patch.
In the third patch, the problem will be fixed.

The first patch is to add __netdev_upper_dev_unlink().
An existed netdev_upper_dev_unlink() is renamed to
__netdev_upper_dev_unlink(). and netdev_upper_dev_unlink()
is added as an wrapper of this function.

The second patch is to add the netdev_nested_priv structure.
netdev_walk_all_{ upper | lower }_dev() pass both private functions
and "data" pointer to handle their own things.
At this point, the data pointer type is void *.
In order to make it easier to expand common variables and functions,
this new netdev_nested_priv structure is added.

The third patch is to add a new variable 'nested_level'
into the net_device structure.
This variable will be used as a parameter of spin_lock_nested() of
dev->addr_list_lock.
Due to this variable, it can avoid lockdep splat.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0ba56b89
    • Taehee Yoo's avatar
      net: core: add nested_level variable in net_device · 1fc70edb
      Taehee Yoo authored 
      This patch is to add a new variable 'nested_level' into the net_device
structure.
This variable will be used as a parameter of spin_lock_nested() of
dev->addr_list_lock.

netif_addr_lock() can be called recursively so spin_lock_nested() is
used instead of spin_lock() and dev->lower_level is used as a parameter
of spin_lock_nested().
But, dev->lower_level value can be updated while it is being used.
So, lockdep would warn a possible deadlock scenario.

When a stacked interface is deleted, netif_{uc | mc}_sync() is
called recursively.
So, spin_lock_nested() is called recursively too.
At this moment, the dev->lower_level variable is used as a parameter of it.
dev->lower_level value is updated when interfaces are being unlinked/linked
immediately.
Thus, After unlinking, dev->lower_level shouldn't be a parameter of
spin_lock_nested().

    A (macvlan)
    |
    B (vlan)
    |
    C (bridge)
    |
    D (macvlan)
    |
    E (vlan)
    |
    F (bridge)

    A->lower_level : 6
    B->lower_level : 5
    C->lower_level : 4
    D->lower_level : 3
    E->lower_level : 2
    F->lower_level : 1

When an interface 'A' is removed, it releases resources.
At this moment, netif_addr_lock() would be called.
Then, netdev_upper_dev_unlink() is called recursively.
Then dev->lower_level is updated.
There is no problem.

But, when the bridge module is removed, 'C' and 'F' interfaces
are removed at once.
If 'F' is removed first, a lower_level value is like below.
    A->lower_level : 5
    B->lower_level : 4
    C->lower_level : 3
    D->lower_level : 2
    E->lower_level : 1
    F->lower_level : 1

Then, 'C' is removed. at this moment, netif_addr_lock() is called
recursively.
The ordering is like this.
C(3)->D(2)->E(1)->F(1)
At this moment, the lower_level value of 'E' and 'F' are the same.
So, lockdep warns a possible deadlock scenario.

In order to avoid this problem, a new variable 'nested_level' is added.
This value is the same as dev->lower_level - 1.
But this value is updated in rtnl_unlock().
So, this variable can be used as a parameter of spin_lock_nested() safely
in the rtnl context.

Test commands:
   ip link add br0 type bridge vlan_filtering 1
   ip link add vlan1 link br0 type vlan id 10
   ip link add macvlan2 link vlan1 type macvlan
   ip link add br3 type bridge vlan_filtering 1
   ip link set macvlan2 master br3
   ip link add vlan4 link br3 type vlan id 10
   ip link add macvlan5 link vlan4 type macvlan
   ip link add br6 type bridge vlan_filtering 1
   ip link set macvlan5 master br6
   ip link add vlan7 link br6 type vlan id 10
   ip link add macvlan8 link vlan7 type macvlan

   ip link set br0 up
   ip link set vlan1 up
   ip link set macvlan2 up
   ip link set br3 up
   ip link set vlan4 up
   ip link set macvlan5 up
   ip link set br6 up
   ip link set vlan7 up
   ip link set macvlan8 up
   modprobe -rv bridge

Splat looks like:
[   36.057436][  T744] WARNING: possible recursive locking detected
[   36.058848][  T744] 5.9.0-rc6+ #728 Not tainted
[   36.059959][  T744] --------------------------------------------
[   36.061391][  T744] ip/744 is trying to acquire lock:
[   36.062590][  T744] ffff8c4767509280 (&vlan_netdev_addr_lock_key){+...}-{2:2}, at: dev_set_rx_mode+0x19/0x30
[   36.064922][  T744]
[   36.064922][  T744] but task is already holding lock:
[   36.066626][  T744] ffff8c4767769280 (&vlan_netdev_addr_lock_key){+...}-{2:2}, at: dev_uc_add+0x1e/0x60
[   36.068851][  T744]
[   36.068851][  T744] other info that might help us debug this:
[   36.070731][  T744]  Possible unsafe locking scenario:
[   36.070731][  T744]
[   36.072497][  T744]        CPU0
[   36.073238][  T744]        ----
[   36.074007][  T744]   lock(&vlan_netdev_addr_lock_key);
[   36.075290][  T744]   lock(&vlan_netdev_addr_lock_key);
[   36.076590][  T744]
[   36.076590][  T744]  *** DEADLOCK ***
[   36.076590][  T744]
[   36.078515][  T744]  May be due to missing lock nesting notation
[   36.078515][  T744]
[   36.080491][  T744] 3 locks held by ip/744:
[   36.081471][  T744]  #0: ffffffff98571df0 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x236/0x490
[   36.083614][  T744]  #1: ffff8c4767769280 (&vlan_netdev_addr_lock_key){+...}-{2:2}, at: dev_uc_add+0x1e/0x60
[   36.085942][  T744]  #2: ffff8c476c8da280 (&bridge_netdev_addr_lock_key/4){+...}-{2:2}, at: dev_uc_sync+0x39/0x80
[   36.088400][  T744]
[   36.088400][  T744] stack backtrace:
[   36.089772][  T744] CPU: 6 PID: 744 Comm: ip Not tainted 5.9.0-rc6+ #728
[   36.091364][  T744] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[   36.093630][  T744] Call Trace:
[   36.094416][  T744]  dump_stack+0x77/0x9b
[   36.095385][  T744]  __lock_acquire+0xbc3/0x1f40
[   36.096522][  T744]  lock_acquire+0xb4/0x3b0
[   36.097540][  T744]  ? dev_set_rx_mode+0x19/0x30
[   36.098657][  T744]  ? rtmsg_ifinfo+0x1f/0x30
[   36.099711][  T744]  ? __dev_notify_flags+0xa5/0xf0
[   36.100874][  T744]  ? rtnl_is_locked+0x11/0x20
[   36.101967][  T744]  ? __dev_set_promiscuity+0x7b/0x1a0
[   36.103230][  T744]  _raw_spin_lock_bh+0x38/0x70
[   36.104348][  T744]  ? dev_set_rx_mode+0x19/0x30
[   36.105461][  T744]  dev_set_rx_mode+0x19/0x30
[   36.106532][  T744]  dev_set_promiscuity+0x36/0x50
[   36.107692][  T744]  __dev_set_promiscuity+0x123/0x1a0
[   36.108929][  T744]  dev_set_promiscuity+0x1e/0x50
[   36.110093][  T744]  br_port_set_promisc+0x1f/0x40 [bridge]
[   36.111415][  T744]  br_manage_promisc+0x8b/0xe0 [bridge]
[   36.112728][  T744]  __dev_set_promiscuity+0x123/0x1a0
[   36.113967][  T744]  ? __hw_addr_sync_one+0x23/0x50
[   36.115135][  T744]  __dev_set_rx_mode+0x68/0x90
[   36.116249][  T744]  dev_uc_sync+0x70/0x80
[   36.117244][  T744]  dev_uc_add+0x50/0x60
[   36.118223][  T744]  macvlan_open+0x18e/0x1f0 [macvlan]
[   36.119470][  T744]  __dev_open+0xd6/0x170
[   36.120470][  T744]  __dev_change_flags+0x181/0x1d0
[   36.121644][  T744]  dev_change_flags+0x23/0x60
[   36.122741][  T744]  do_setlink+0x30a/0x11e0
[   36.123778][  T744]  ? __lock_acquire+0x92c/0x1f40
[   36.124929][  T744]  ? __nla_validate_parse.part.6+0x45/0x8e0
[   36.126309][  T744]  ? __lock_acquire+0x92c/0x1f40
[   36.127457][  T744]  __rtnl_newlink+0x546/0x8e0
[   36.128560][  T744]  ? lock_acquire+0xb4/0x3b0
[   36.129623][  T744]  ? deactivate_slab.isra.85+0x6a1/0x850
[   36.130946][  T744]  ? __lock_acquire+0x92c/0x1f40
[   36.132102][  T744]  ? lock_acquire+0xb4/0x3b0
[   36.133176][  T744]  ? is_bpf_text_address+0x5/0xe0
[   36.134364][  T744]  ? rtnl_newlink+0x2e/0x70
[   36.135445][  T744]  ? rcu_read_lock_sched_held+0x32/0x60
[   36.136771][  T744]  ? kmem_cache_alloc_trace+0x2d8/0x380
[   36.138070][  T744]  ? rtnl_newlink+0x2e/0x70
[   36.139164][  T744]  rtnl_newlink+0x47/0x70
[ ... ]

Fixes: 845e0ebb ("net: change addr_list_lock back to static key")
Signed-off-by: default avatarTaehee Yoo <ap420073@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1fc70edb
    • Taehee Yoo's avatar
      net: core: introduce struct netdev_nested_priv for nested interface infrastructure · eff74233
      Taehee Yoo authored 
      Functions related to nested interface infrastructure such as
netdev_walk_all_{ upper | lower }_dev() pass both private functions
and "data" pointer to handle their own things.
At this point, the data pointer type is void *.
In order to make it easier to expand common variables and functions,
this new netdev_nested_priv structure is added.

In the following patch, a new member variable will be added into this
struct to fix the lockdep issue.
Signed-off-by: default avatarTaehee Yoo <ap420073@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      eff74233
    • Taehee Yoo's avatar
      net: core: add __netdev_upper_dev_unlink() · fe8300fd
      Taehee Yoo authored 
      The netdev_upper_dev_unlink() has to work differently according to flags.
This idea is the same with __netdev_upper_dev_link().

In the following patches, new flags will be added.
Signed-off-by: default avatarTaehee Yoo <ap420073@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      fe8300fd
    • Cong Wang's avatar
      net_sched: remove a redundant goto chain check · 1aad8049
      Cong Wang authored 
      All TC actions call tcf_action_check_ctrlact() to validate
goto chain, so this check in tcf_action_init_1() is actually
redundant. Remove it to save troubles of leaking memory.

Fixes: e49d8c22 ("net_sched: defer tcf_idr_insert() in tcf_action_init_1()")
Reported-by: default avatarVlad Buslov <vladbu@mellanox.com>
Suggested-by: default avatarDavide Caratti <dcaratti@redhat.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: default avatarCong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: default avatarDavide Caratti <dcaratti@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1aad8049
    • Nikolay Aleksandrov's avatar
      net: bridge: fdb: don't flush ext_learn entries · f2f3729f
      Nikolay Aleksandrov authored 
      When a user-space software manages fdb entries externally it should
set the ext_learn flag which marks the fdb entry as externally managed
and avoids expiring it (they're treated as static fdbs). Unfortunately
on events where fdb entries are flushed (STP down, netlink fdb flush
etc) these fdbs are also deleted automatically by the bridge. That in turn
causes trouble for the managing user-space software (e.g. in MLAG setups
we lose remote fdb entries on port flaps).
These entries are completely externally managed so we should avoid
automatically deleting them, the only exception are offloaded entries
(i.e. BR_FDB_ADDED_BY_EXT_LEARN + BR_FDB_OFFLOADED). They are flushed as
before.

Fixes: eb100e0e ("net: bridge: allow to add externally learned entries from user-space")
Signed-off-by: default avatarNikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f2f3729f
    • David S. Miller's avatar
      Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec · a4be47af
      David S. Miller authored 
      Steffen Klassert says:

====================
pull request (net): ipsec 2020-09-28

1) Fix a build warning in ip_vti if CONFIG_IPV6 is not set.
   From YueHaibing.

2) Restore IPCB on espintcp before handing the packet to xfrm
   as the information there is still needed.
   From Sabrina Dubroca.

3) Fix pmtu updating for xfrm interfaces.
   From Sabrina Dubroca.

4) Some xfrm state information was not cloned with xfrm_do_migrate.
   Fixes to clone the full xfrm state, from Antony Antony.

5) Use the correct address family in xfrm_state_find. The struct
   flowi must always be interpreted along with the original
   address family. This got lost over the years.
   Fix from Herbert Xu.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a4be47af
  7. 27 Sep, 2020 4 commits
  9. 26 Sep, 2020 7 commits
  11. 25 Sep, 2020 2 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7