- 17 Apr, 2023 40 commits
-
-
Anand Jain authored
BTRFS_FEATURE_INCOMPAT_SUPP is defined twice, once under CONFIG_BTRFS_DEBUG and once without it, resulting in repetitive code. The reason for this is to add experimental features under CONFIG_BTRFS_DEBUG. To avoid repetitive code, add a common list BTRFS_FEATURE_INCOMPAT_SUPP_STABLE, and append experimental features only under CONFIG_BTRFS_DEBUG. Signed-off-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Qu Wenruo authored
We don't need to pass the roots as arguments, reading them from the rb-tree is cheap. Thus there is really not much need to pre-fetch it and pass it all the way from scrub_stripe(). And we already have more than enough arguments in scrub_simple_mirror() and scrub_simple_stripe(), it's better to remove them and only grab those roots in scrub_simple_mirror(). Signed-off-by:
Qu Wenruo <wqu@suse.com> Reviewed-by:
-
Qu Wenruo authored
The variable @path is no longer passed into any call sites after commit 18d30ab9 ("btrfs: scrub: use scrub_simple_mirror() to handle RAID56 data stripe scrub"), thus we can remove the variable completely. Signed-off-by:
-
Qu Wenruo authored
[BUG] Currently btrfs can use dev-replace device as an extra mirror for read-repair. But it can lead to NODATASUM corruption in the following case: There is a RAID1 data chunk, and dev-replace is running from dev2 to dev0. |//| = Replaced data X X+1MB X+2MB Dev 2: | | | <- Source dev Dev 0: |///////| | <- Target dev Then a read on dev 2 X+2MB happens. And something wrong happened inside devid 2, causing an -EIO. In that case, read-repair would try the next mirror, and since we can use target device as an extra mirror, we will use that mirror instead. But unfortunately since the read is beyond the current replace cursor, we should not trust it at all, what we get would be just uninitialized garbage. But if this read is for NODATASUM range, then we just trust them and cause data corruption. [CAUSE] We used to have some checks to make sure we only return such extra mirror when the range is before our left cursor. The first commit introducing this behavior is ad6d620e ("Btrfs: allow repair code to include target disk when searching mirrors"). But later a fix, 22ab04e8 ("Btrfs: fix race between device replace and chunk allocation") changed the behavior, to always let btrfs_map_block() include the extra mirror to address a race in dev-replace which can cause missing writes to target device. This means, we lose the tracking of cursor for the extra mirror, thus can lead to above corruption. [FIX] The extra mirror is never a reliable one, at the beginning of dev-replace, the reliability is zero, while only at the end of the replace it's a fully reliable mirror. We either do the complex tracking, or never trust it. IMHO it's much easier to maintain if we don't trust it at all, and the extra mirror can only benefit for a limited period of time (during replace). Thus this patch would completely remove the ability to use target device as an extra mirror. Signed-off-by: -
Qu Wenruo authored
Currently open_ctree() still uses two variables for error handling, err and ret. This can be confusing and missing some errors and does not conform to current coding style. This patch will fix the problems by: - Use only ret for error handling - Add proper ret assignment Originally we rely on the default value (-EINVAL) of err to handle errors, but that doesn't really reflects the error. This will change it use the correct error number for the following call sites: * subpage_info allocation * btrfs_free_extra_devids() * btrfs_check_rw_degradable() * cleaner_kthread allocation * transaction_kthread allocation - Add an extra ASSERT() To make sure we error out instead of returning 0. Reviewed-by:
-
Christoph Hellwig authored
Introduce a bio_offset variable for the current offset into the bio instead of recalculating it over and over. Remove the now only used once search_len and sector_offset variables, and reduce the scope for count and cur_disk_bytenr. Reviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Christoph Hellwig authored
There is no need to search for a file offset in a bio, it is now always provided in bbio->file_offset (set at bio allocation time since 0d495430 ("btrfs: set bbio->file_offset in alloc_new_bio")). Just use that with the offset into the bio. Reviewed-by:
-
Johannes Thumshirn authored
Nowadays calc_bio_boundaries() is a relatively simple function that only guarantees the one bio equals to one ordered extent rule for uncompressed Zone Append bios. Sink it into it's only caller alloc_new_bio(). Reviewed-by:
-
Christoph Hellwig authored
bio_add_page always adds either the entire range passed to it or nothing. Based on that btrfs_bio_add_page can only return a length smaller than the passed in one when hitting the ordered extent limit, which can only happen for writes. Given that compressed writes never even use this code path, this means that all the special cases for compressed extent offset handling are dead code. Reflow submit_extent_page to take advantage of this by inlining btrfs_bio_add_page and handling the ordered extent limit by decrementing it for each added range and thus significantly simplifying the loop. Reviewed-by:
-
Christoph Hellwig authored
Different loop iterations in btrfs_bio_add_page not only have the same contiguity parameters, but also any non-initial operation operates on a fresh bio anyway. Factor out the contiguity check into a new btrfs_bio_is_contig and only call it once in submit_extent_page before descending into the bio_add_page loop. Reviewed-by:
-
Christoph Hellwig authored
Remove the has_error and saved_ret variables, and just jump to a goto label for error handling from the only place returning an error from the main loop. Reviewed-by:
-
Christoph Hellwig authored
submit_extent_page always returns 0 since commit d5e4377d ("btrfs: split zone append bios in btrfs_submit_bio"). Change it to a void return type and remove all the unreachable error handling code in the callers. Reviewed-by:
-
Christoph Hellwig authored
Update the compress_type in the btrfs_bio_ctrl after forcing out the previous bio in btrfs_do_readpage, so that alloc_new_bio can just use the compress_type member in struct btrfs_bio_ctrl instead of passing the same information redundantly as a function argument. Reviewed-by:
-
Christoph Hellwig authored
Rename this_bio_flag to compress_type to match the surrounding code and better document the intent. Also use the proper enum type instead of unsigned long. Reviewed-by:
-
Christoph Hellwig authored
The compress_type can only change on a per-extent basis. So instead of checking it for every page in btrfs_bio_add_page, do the check once in btrfs_do_readpage, which is the only caller of btrfs_bio_add_page and submit_extent_page that deals with compressed extents. Signed-off-by:
-
Christoph Hellwig authored
Instead of passing down the wbc pointer the deep call chain, just add it to the btrfs_bio_ctrl structure. Reviewed-by:
-
Christoph Hellwig authored
The sync_io flag is equivalent to wbc->sync_mode == WB_SYNC_ALL, so just check for that and remove the separate flag. Reviewed-by:
-
Christoph Hellwig authored
The bio op and flags never change over the life time of a bio_ctrl, so move it in there instead of passing it down the deep call chain all the way down to alloc_new_bio. Reviewed-by:
-
Christoph Hellwig authored
If force_bio_submit, submit_extent_page simply calls submit_one_bio as the first thing. This can just be moved to the only caller that sets force_bio_submit to true. Reviewed-by:
-
Christoph Hellwig authored
When read_extent_buffer_subpage calls submit_extent_page, it does so on a freshly initialized btrfs_bio_ctrl structure that can't have a valid bio to submit. Clear the force_bio_submit parameter to false as there is nothing to submit. Reviewed-by:
-
Anand Jain authored
btrfs_bin_search() is a simple wrapper that searches for the whole slots by calling btrfs_generic_bin_search() with the starting slot/first_slot preset to 0. This simple wrapper can be open coded as btrfs_bin_search(). Signed-off-by:
-
Qu Wenruo authored
[BUG] Although dev replace ioctl has a way to specify the mode on whether we should read from the source device, it's not properly followed. # mkfs.btrfs -f -d raid1 -m raid1 $dev1 $dev2 # mount $dev1 $mnt # xfs_io -f -c "pwrite 0 32M" $mnt/file # sync # btrfs replace start -r -f 1 $dev3 $mnt And one extra trace is added to scrub_submit(), showing the detail about the bio: btrfs-11569 [005] ... 37.0270: scrub_submit.part.0: devid=1 logical=22036480 phy=22036480 len=16384 btrfs-11569 [005] ... 37.0273: scrub_submit.part.0: devid=1 logical=30457856 phy=30457856 len=32768 btrfs-11569 [005] ... 37.0274: scrub_submit.part.0: devid=1 logical=30507008 phy=30507008 len=49152 btrfs-11569 [005] ... 37.0274: scrub_submit.part.0: devid=1 logical=30605312 phy=30605312 len=32768 btrfs-11569 [005] ... 37.0275: scrub_submit.part.0: devid=1 logical=30703616 phy=30703616 len=65536 btrfs-11569 [005] ... 37.0281: scrub_submit.part.0: devid=1 logical=298844160 phy=298844160 len=131072 ... btrfs-11569 [005] ... 37.0762: scrub_submit.part.0: devid=1 logical=322961408 phy=322961408 len=131072 btrfs-11569 [005] ... 37.0762: scrub_submit.part.0: devid=1 logical=323092480 phy=323092480 len=131072 One can see that all the reads are submitted to devid 1, even if we have specified "-r" option to avoid reading from the source device. [CAUSE] The dev-replace read mode is only set but not followed by scrub code at all. In fact, only common read path is properly following the read mode, but scrub itself has its own read path, thus not following the mode. [FIX] Here we enhance scrub_find_good_copy() to also follow the read mode. The idea is pretty simple, in the first loop, we avoid the following devices: - Missing devices This is the existing condition - The source device if the replace wants to avoid it. And if above loop found no candidate (e.g. replace a single device), then we discard the 2nd condition, and try again. Since we're here, also enhance the function scrub_find_good_copy() by: - Remove the forward declaration - Makes it return int To indicates errors, e.g. no good mirror found. - Add extra error messages Now with the same trace, "btrfs replace start -r" works as expected: btrfs-1213 [000] ... 991.9059: scrub_submit.part.0: devid=2 logical=22036480 phy=1064960 len=16384 btrfs-1213 [000] ... 991.9062: scrub_submit.part.0: devid=2 logical=30457856 phy=9486336 len=32768 btrfs-1213 [000] ... 991.9063: scrub_submit.part.0: devid=2 logical=30507008 phy=9535488 len=49152 btrfs-1213 [000] ... 991.9064: scrub_submit.part.0: devid=2 logical=30605312 phy=9633792 len=32768 btrfs-1213 [000] ... 991.9065: scrub_submit.part.0: devid=2 logical=30703616 phy=9732096 len=65536 btrfs-1213 [000] ... 991.9073: scrub_submit.part.0: devid=2 logical=298844160 phy=277872640 len=131072 btrfs-1213 [000] ... 991.9075: scrub_submit.part.0: devid=2 logical=298975232 phy=278003712 len=131072 btrfs-1213 [000] ... 991.9078: scrub_submit.part.0: devid=2 logical=299106304 phy=278134784 len=131072 ... btrfs-1213 [000] ... 991.9474: scrub_submit.part.0: devid=2 logical=318504960 phy=297533440 len=131072 btrfs-1213 [000] ... 991.9476: scrub_submit.part.0: devid=2 logical=318636032 phy=297664512 len=131072 btrfs-1213 [000] ... 991.9479: scrub_submit.part.0: devid=2 logical=318767104 phy=297795584 len=131072 Reviewed-by:
-
Christoph Hellwig authored
Fold finish_compressed_bio_write into its only caller as there is no reason to keep them separate. Reviewed-by:
-
Christoph Hellwig authored
No one ever set ->mapping on these pages, so don't bother clearing it. Reviewed-by:
-
Christoph Hellwig authored
Share the code to free the compressed pages and the array to hold them into a common helper. Reviewed-by:
-
Christoph Hellwig authored
Factor out a common helper to add the compressed_bio pages to the bio that is shared by the compressed read and write path. Reviewed-by:
-
Christoph Hellwig authored
struct btrfs_bio now has a file_offset field set up by all submitters. Use that value combined with the bio size in add_ra_bio_pages to calculate the last offset in the bio. Reviewed-by:
-
Christoph Hellwig authored
struct btrfs_bio now has a file_offset field set up by all submitters. Use that in btrfs_submit_compressed_read instead of recalculating the value. Reviewed-by:
-
Christoph Hellwig authored
em can't be non-NULL after the free_extent_map label. Also remove the now pointless clearing of em to NULL after freeing it. Reviewed-by:
-
Christoph Hellwig authored
Embed a btrfs_bio into struct compressed_bio. This avoids potential (so far theoretical) deadlocks due to nesting of btrfs_bioset allocations for the original read bio and the compressed bio, and avoids an extra memory allocation in the I/O path. Reviewed-by:
-
Qu Wenruo authored
In btrfs_io_context structure, we have a pointer raid_map, which indicates the logical bytenr for each stripe. But considering we always call sort_parity_stripes(), the result raid_map[] is always sorted, thus raid_map[0] is always the logical bytenr of the full stripe. So why we waste the space and time (for sorting) for raid_map? This patch will replace btrfs_io_context::raid_map with a single u64 number, full_stripe_start, by: - Replace btrfs_io_context::raid_map with full_stripe_start - Replace call sites using raid_map[0] to use full_stripe_start - Replace call sites using raid_map[i] to compare with nr_data_stripes. The benefits are: - Less memory wasted on raid_map It's sizeof(u64) * num_stripes vs sizeof(u64). It'll always save at least one u64, and the benefit grows larger with num_stripes. - No more weird alloc_btrfs_io_context() behavior As there is only one fixed size + one variable length array. Signed-off-by:
-
Qu Wenruo authored
For btrfs dev-replace, we have to duplicate writes to the source device into the target device. For non-RAID56, all writes into the same mapped ranges are sharing the same content, thus they don't really need to bother anything. (E.g. in btrfs_submit_bio() for non-RAID56 range we just submit the same write to all involved devices). But for RAID56, all stripes contain different content, thus we must have a clear mapping of which stripe is duplicated from which original stripe. Currently we use a complex way using tgtdev_map[] array, e.g: num_tgtdevs = 1 tgtdev_map[0] = 0 <- Means stripes[0] is not involved in replace. tgtdev_map[1] = 3 <- Means stripes[1] is involved in replace, and it's duplicated to stripes[3]. tgtdev_map[2] = 0 <- Means stripes[2] is not involved in replace. But this is wasting some space, and ignores one important thing for dev-replace, there is at most one running replace. Thus we can change it to a fixed array to represent the mapping: replace_nr_stripes = 1 replace_stripe_src = 1 <- Means stripes[1] is involved in replace. thus the extra stripe is a copy of stripes[1] By this we can save some space for bioc on RAID56 chunks with many devices. And we get rid of one variable sized array from bioc. Thus the patch involves the following changes: - Replace @num_tgtdevs and @tgtdev_map[] with @replace_nr_stripes and @replace_stripe_src. @num_tgtdevs is just renamed to @replace_nr_stripes. While the mapping is completely changed. - Add extra ASSERT()s for RAID56 code - Only add two more extra stripes for dev-replace cases. As we have an upper limit on how many dev-replace stripes we can have. - Unify the behavior of handle_ops_on_dev_replace() Previously handle_ops_on_dev_replace() go two different paths for WRITE and GET_READ_MIRRORS. Now unify them by always going the WRITE path first (with at most 2 replace stripes), then if we're doing GET_READ_MIRRORS and we have 2 extra stripes, just drop one stripe. - Remove the @real_stripes argument from alloc_btrfs_io_context() As we don't need the old variable length array any more. Signed-off-by:
-
Qu Wenruo authored
That structure is our ultimate object for all __btrfs_map_block() related functions. We have some hard to understand members, like tgtdev_map, but without any comments. This patch will improve the situation: - Add extra comments for num_stripes, mirror_num, num_tgtdevs and tgtdev_map[] Especially for the last two members, add a dedicated (thus very long) comments for them, with example to explain it. - Shrink those int members to u16. In fact our on-disk format is only using u16 for num_stripes, thus no need to use int at all. Signed-off-by:
-
Qu Wenruo authored
There is no memory re-allocation for handle_ops_on_dev_replace(), thus we don't need to pass a btrfs_io_context pointer. Reviewed-by:
-
Qu Wenruo authored
There are quite some div64 calls inside btrfs_map_block() and its variants. Such calls are for @stripe_nr, where @stripe_nr is the number of stripes before our logical bytenr inside a chunk. However we can eliminate such div64 calls by just reducing the width of @stripe_nr from 64 to 32. This can be done because our chunk size limit is already 10G, with fixed stripe length 64K. Thus a U32 is definitely enough to contain the number of stripes. With such width reduction, we can get rid of slower div64, and extra warning for certain 32bit arch. This patch would do: - Add a new tree-checker chunk validation on chunk length Make sure no chunk can reach 256G, which can also act as a bitflip checker. - Reduce the width from u64 to u32 for @stripe_nr variables - Replace unnecessary div64 calls with regular modulo and division 32bit division and modulo are much faster than 64bit operations, and we are finally free of the div64 fear at least in those involved functions. Signed-off-by:
-
Qu Wenruo authored
Currently btrfs doesn't support stripe lengths other than 64KiB. This is already set in the tree-checker. There is really no meaning to record that fixed value in map_lookup for now, and can all be replaced with BTRFS_STRIPE_LEN. Furthermore we can use the fix stripe length to do the following optimization: - Use BTRFS_STRIPE_LEN_SHIFT to replace some 64bit division Now we only need to do a right shift. And the value of BTRFS_STRIPE_LEN itself is already too large for bit shift, thus if we accidentally use BTRFS_STRIPE_LEN to do bit shift, a compiler warning would be triggered. Thus this bit shift optimization would be safe. - Use BTRFS_STRIPE_LEN_MASK to calculate the offset inside a stripe Reviewed-by:
-
Christoph Hellwig authored
Move the remaining code that deals with initializing the btree inode into btrfs_init_btree_inode instead of splitting it between that helpers and its only caller. Reviewed-by:
-
Anand Jain authored
Function search_file_offset_in_bio() finds the file offset in the file_offset_ret, and we use the return value to indicate if it is successful, so use bool. Reviewed-by:
-
Anand Jain authored
The function btrfs_lookup_bio_sums() and a nested if statement declare ret respectively as blk_status_t and int. There is no need to store the return value of search_file_offset_in_bio() to ret as this is a one-time call. Reviewed-by:
-
Johannes Thumshirn authored
Remove btrfs_csum_ptr() and fold it into it's only caller. Reviewed-by:
-
