- 14 Aug, 2018 40 commits
-
-
Aneesh Kumar K.V authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit 91d06971 upstream. Currently we do not have an isync, or any other context synchronizing instruction prior to the slbie/slbmte in _switch() that updates the SLB entry for the kernel stack. However that is not correct as outlined in the ISA. From Power ISA Version 3.0B, Book III, Chapter 11, page 1133: "Changing the contents of ... the contents of SLB entries ... can have the side effect of altering the context in which data addresses and instruction addresses are interpreted, and in which instructions are executed and data accesses are performed. ... These side effects need not occur in program order, and therefore may require explicit synchronization by software. ... The synchronizing instruction before the context-altering instruction ensures that all instructions up to and including that synchronizing instruction are fetched and executed in the context that existed before the alteration." And page 1136: "For data accesses, the context synchronizing instruction before the slbie, slbieg, slbia, slbmte, tlbie, or tlbiel instruction ensures that all preceding instructions that access data storage have completed to a point at which they have reported all exceptions they will cause." We're not aware of any bugs caused by this, but it should be fixed regardless. Add the missing isync when updating kernel stack SLB entry. Cc: stable@vger.kernel.org Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> [mpe: Flesh out change log with more ISA text & explanation] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com>
-
Miklos Szeredi authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit 6becdb60 upstream. syzbot is reporting NULL pointer dereference at fuse_ctl_remove_conn() [1]. Since fc->ctl_ndents is incremented by fuse_ctl_add_conn() when new_inode() failed, fuse_ctl_remove_conn() reaches an inode-less dentry and tries to clear d_inode(dentry)->i_private field. Fix by only adding the dentry to the array after being fully set up. When tearing down the control directory, do d_invalidate() on it to get rid of any mounts that might have been added. [1] https://syzkaller.appspot.com/bug?id=f396d863067238959c91c0b7cfc10b163638cac6Reported-by:
syzbot <syzbot+32c236387d66c4516827@syzkaller.appspotmail.com> Fixes: bafa9654 ("[PATCH] fuse: add control filesystem") Cc: <stable@vger.kernel.org> # v2.6.18 Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
-
Tetsuo Handa authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit 543b8f86 upstream. syzbot is reporting use-after-free at fuse_kill_sb_blk() [1]. Since sb->s_fs_info field is not cleared after fc was released by fuse_conn_put() when initialization failed, fuse_kill_sb_blk() finds already released fc and tries to hold the lock. Fix this by clearing sb->s_fs_info field after calling fuse_conn_put(). [1] https://syzkaller.appspot.com/bug?id=a07a680ed0a9290585ca424546860464dd9658dbSigned-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by:
syzbot <syzbot+ec3986119086fe4eec97@syzkaller.appspotmail.com> Fixes: 3b463ae0 ("fuse: invalidation reverse calls") Cc: John Muir <john@jmuir.com> Cc: Csaba Henk <csaba@gluster.com> Cc: Anand Avati <avati@redhat.com> Cc: <stable@vger.kernel.org> # v2.6.31 Signed-off-by:
-
Miklos Szeredi authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit df0e91d4 upstream. Fuse has an "atomic_o_trunc" mode, where userspace filesystem uses the O_TRUNC flag in the OPEN request to truncate the file atomically with the open. In this mode there's no need to send a SETATTR request to userspace after the open, so fuse_do_setattr() checks this mode and returns. But this misses the important step of truncating the pagecache. Add the missing parts of truncation to the ATTR_OPEN branch. Reported-by:
Chad Austin <chadaustin@fb.com> Fixes: 6ff958ed ("fuse: add atomic open+truncate support") Signed-off-by:
-
Amit Pundir authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit 7dc5fe08 upstream. AOSP use userspace firmware loader to load firmwares, which will return -EAGAIN in case qca/rampatch_00440302.bin is not found. Since there is no rampatch for dragonboard820c QCA controller revision, just make it work as is. CC: Loic Poulain <loic.poulain@linaro.org> CC: Nicolas Dechesne <nicolas.dechesne@linaro.org> CC: Marcel Holtmann <marcel@holtmann.org> CC: Johan Hedberg <johan.hedberg@gmail.com> CC: Stable <stable@vger.kernel.org> Signed-off-by:
Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Corey Minyard authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit fe50a7d0 upstream. There was one place where the timeout value for an operation was not being set, if a capabilities request was done from idle. Move the timeout value setting to before where that change might be requested. IMHO the cause here is the invisible returns in the macros. Maybe that's a job for later, though. Reported-by:
Nordmark Claes <Claes.Nordmark@tieto.com> Signed-off-by:
Corey Minyard <cminyard@mvista.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Mikulas Patocka authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit 2026d357 upstream. The function __builtin_expect returns long type (see the gcc documentation), and so do macros likely and unlikely. Unfortunatelly, when CONFIG_PROFILE_ANNOTATED_BRANCHES is selected, the macros likely and unlikely expand to __branch_check__ and __branch_check__ truncates the long type to int. This unintended truncation may cause bugs in various kernel code (we found a bug in dm-writecache because of it), so it's better to fix __branch_check__ to return long. Link: http://lkml.kernel.org/r/alpine.LRH.2.02.1805300818140.24812@file01.intranet.prod.int.rdu2.redhat.com Cc: Ingo Molnar <mingo@redhat.com> Cc: stable@vger.kernel.org Fixes: 1f0d69a9 ("tracing: profile likely and unlikely annotations") Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Matthias Schiffer authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit 6fb86566 upstream. ftrace_graph_caller was never run after calling ftrace_trace_function, breaking the function graph tracer. Fix this, bringing it in line with the x86 implementation. While we're at it, also streamline the control flow of _mcount a bit to reduce the number of branches. This issue was reported before: https://www.linux-mips.org/archives/linux-mips/2014-11/msg00295.htmlSigned-off-by:
Matthias Schiffer <mschiffer@universe-factory.net> Tested-by:
Matt Redfearn <matt.redfearn@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/18929/Signed-off-by:
Paul Burton <paul.burton@mips.com> Cc: stable@vger.kernel.org # v3.17+ Signed-off-by:
-
Geert Uytterhoeven authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit 666902e4 upstream. "%pCr" formats the current rate of a clock, and calls clk_get_rate(). The latter obtains a mutex, hence it must not be called from atomic context. Remove support for this rarely-used format, as vsprintf() (and e.g. printk()) must be callable from any context. Any remaining out-of-tree users will start seeing the clock's name printed instead of its rate. Reported-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Fixes: 900cca29 ("lib/vsprintf: add %pC{,n,r} format specifiers for clocks") Link: http://lkml.kernel.org/r/1527845302-12159-5-git-send-email-geert+renesas@glider.be To: Jia-Ju Bai <baijiaju1990@gmail.com> To: Jonathan Corbet <corbet@lwn.net> To: Michael Turquette <mturquette@baylibre.com> To: Stephen Boyd <sboyd@kernel.org> To: Zhang Rui <rui.zhang@intel.com> To: Eduardo Valentin <edubezval@gmail.com> To: Eric Anholt <eric@anholt.net> To: Stefan Wahren <stefan.wahren@i2se.com> To: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: linux-doc@vger.kernel.org Cc: linux-clk@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: linux-serial@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: stable@vger.kernel.org # 4.1+ Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Petr Mladek <pmladek@suse.com> Signed-off-by:
-
Alexander Sverdlin authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit 5d302ed3 upstream. According to "EP93xx User’s Guide", I2STXLinCtrlData and I2SRXLinCtrlData registers actually have different format. The only currently used bit (Left_Right_Justify) has different position. Fix this and simplify the whole setup taking into account the fact that both registers have zero default value. The practical effect of the above is repaired SND_SOC_DAIFMT_RIGHT_J support (currently unused). Signed-off-by:
Alexander Sverdlin <alexander.sverdlin@gmail.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Alexander Sverdlin authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit 2d534113 upstream. The bit responsible for LRCLK polarity is i2s_tlrs (0), not i2s_trel (2) (refer to "EP93xx User's Guide"). Previously card drivers which specified SND_SOC_DAIFMT_NB_IF actually got SND_SOC_DAIFMT_NB_NF, an adaptation is necessary to retain the old behavior. Signed-off-by:
-
Srinivas Kandagatla authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit ff2faf12 upstream. dapm_kcontrol_data is freed as part of dapm_kcontrol_free(), leaving the paths pointer dangling in the list. This leads to system crash when we try to unload and reload sound card. I hit this bug during ADSP crash/reboot test case on Dragon board DB410c. Without this patch, on SLAB Poisoning enabled build, kernel crashes with "BUG kmalloc-128 (Tainted: G W ): Poison overwritten" Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by:
-
Ingo Flaschberger authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit 065c0956 upstream. 1wire family module autoload fails because of upper/lower case mismatch. Signed-off-by:
Ingo Flaschberger <ingo.flaschberger@gmail.com> Acked-by:
Evgeniy Polyakov <zbr@ioremap.net> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Maxim Moseychuk authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit 6e01827e upstream. Some low-speed and full-speed devices (for example, bluetooth) do not have time to initialize. For them, ETIMEDOUT is a valid error. We need to give them another try. Otherwise, they will never be initialized correctly and in dmesg will be messages "Bluetooth: hci0 command 0x1002 tx timeout" or similars. Fixes: 264904cc ("usb: retry reset if a device times out") Cc: stable <stable@vger.kernel.org> Signed-off-by:
Maxim Moseychuk <franchesko.salias.hudro.pedros@gmail.com> Signed-off-by:
-
Eric W. Biederman authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit 7de712cc upstream. While working on changing this code to use force_sig_fault I discovered that do_unaliged_user is sets si_signo to SIGBUS and passes SIGSEGV to force_sig_info. Which is just b0rked. The code is reporting a SIGBUS error so replace the SIGSEGV with SIGBUS. Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: linux-xtensa@linux-xtensa.org Cc: stable@vger.kernel.org Acked-by:
Max Filippov <jcmvbkbc@gmail.com> Fixes: 5a0015d6 ("[PATCH] xtensa: Architecture support for Tensilica Xtensa Part 3") Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Daniel Wagner authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit 8afb1d2c upstream. Commit 40f70c03 ("serial: sh-sci: add locking to console write function to avoid SMP lockup") copied the strategy to avoid locking problems in conjuncture with the console from the UART8250 driver. Instead using directly spin_{try}lock_irqsave(), local_irq_save() followed by spin_{try}lock() was used. While this is correct on mainline, for -rt it is a problem. spin_{try}lock() will check if it is running in a valid context. Since the local_irq_save() has already been executed, the context has changed and spin_{try}lock() will complain. The reason why spin_{try}lock() complains is that on -rt the spin locks are turned into mutexes and therefore can sleep. Sleeping with interrupts disabled is not valid. BUG: sleeping function called from invalid context at /home/wagi/work/rt/v4.4-cip-rt/kernel/locking/rtmutex.c:995 in_atomic(): 0, irqs_disabled(): 128, pid: 778, name: irq/76-eth0 CPU: 0 PID: 778 Comm: irq/76-eth0 Not tainted 4.4.126-test-cip22-rt14-00403-gcd03665c8318 #12 Hardware name: Generic RZ/G1 (Flattened Device Tree) Backtrace: [<c00140a0>] (dump_backtrace) from [<c001424c>] (show_stack+0x18/0x1c) r7:c06b01f0 r6:60010193 r5:00000000 r4:c06b01f0 [<c0014234>] (show_stack) from [<c01d3c94>] (dump_stack+0x78/0x94) [<c01d3c1c>] (dump_stack) from [<c004c134>] (___might_sleep+0x134/0x194) r7:60010113 r6:c06d3559 r5:00000000 r4:ffffe000 [<c004c000>] (___might_sleep) from [<c04ded60>] (rt_spin_lock+0x20/0x74) r5:c06f4d60 r4:c06f4d60 [<c04ded40>] (rt_spin_lock) from [<c02577e4>] (serial_console_write+0x100/0x118) r5:c06f4d60 r4:c06f4d60 [<c02576e4>] (serial_console_write) from [<c0061060>] (call_console_drivers.constprop.15+0x10c/0x124) r10:c06d2894 r9:c04e18b0 r8:00000028 r7:00000000 r6:c06d3559 r5:c06d2798 r4:c06b9914 r3:c02576e4 [<c0060f54>] (call_console_drivers.constprop.15) from [<c0062984>] (console_unlock+0x32c/0x430) r10:c06d30d8 r9:00000028 r8:c06dd518 r7:00000005 r6:00000000 r5:c06d2798 r4:c06d2798 r3:00000028 [<c0062658>] (console_unlock) from [<c0062e1c>] (vprintk_emit+0x394/0x4f0) r10:c06d2798 r9:c06d30ee r8:00000006 r7:00000005 r6:c06a78fc r5:00000027 r4:00000003 [<c0062a88>] (vprintk_emit) from [<c0062fa0>] (vprintk+0x28/0x30) r10:c060bd46 r9:00001000 r8:c06b9a90 r7:c06b9a90 r6:c06b994c r5:c06b9a3c r4:c0062fa8 [<c0062f78>] (vprintk) from [<c0062fb8>] (vprintk_default+0x10/0x14) [<c0062fa8>] (vprintk_default) from [<c009cd30>] (printk+0x78/0x84) [<c009ccbc>] (printk) from [<c025afdc>] (credit_entropy_bits+0x17c/0x2cc) r3:00000001 r2:decade60 r1:c061a5ee r0:c061a523 r4:00000006 [<c025ae60>] (credit_entropy_bits) from [<c025bf74>] (add_interrupt_randomness+0x160/0x178) r10:466e7196 r9:1f536000 r8:fffeef74 r7:00000000 r6:c06b9a60 r5:c06b9a3c r4:dfbcf680 [<c025be14>] (add_interrupt_randomness) from [<c006536c>] (irq_thread+0x1e8/0x248) r10:c006537c r9:c06cdf21 r8:c0064fcc r7:df791c24 r6:df791c00 r5:ffffe000 r4:df525180 [<c0065184>] (irq_thread) from [<c003fba4>] (kthread+0x108/0x11c) r10:00000000 r9:00000000 r8:c0065184 r7:df791c00 r6:00000000 r5:df791d00 r4:decac000 [<c003fa9c>] (kthread) from [<c00101b8>] (ret_from_fork+0x14/0x3c) r8:00000000 r7:00000000 r6:00000000 r5:c003fa9c r4:df791d00 Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
Daniel Wagner <daniel.wagner@siemens.com> Reviewed-by:
-
Michael Schmitz authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit 3f90f9ef upstream. If 020/030 support is enabled, get_io_area() leaves an IO_SIZE gap between mappings which is added to the vm_struct representing the mapping. __ioremap() uses the actual requested size (after alignment), while __iounmap() is passed the size from the vm_struct. On 020/030, early termination descriptors are used to set up mappings of extent 'size', which are validated on unmapping. The unmapped gap of size IO_SIZE defeats the sanity check of the pmd tables, causing __iounmap() to loop forever on 030. On 040/060, unmapping of page table entries does not check for a valid mapping, so the umapping loop always completes there. Adjust size to be unmapped by the gap that had been added in the vm_struct prior. This fixes the hang in atari_platform_init() reported a long time ago, and a similar one reported by Finn recently (addressed by removing ioremap() use from the SWIM driver. Tested on my Falcon in 030 mode - untested but should work the same on 040/060 (the extra page tables cleared there would never have been set up anyway). Signed-off-by:
Michael Schmitz <schmitzmic@gmail.com> [geert: Minor commit description improvements] [geert: This was fixed in 2.4.23, but not in 2.5.x] Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Dan Williams authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit eab6870f upstream. Mark Rutland noticed that GCC optimization passes have the potential to elide necessary invocations of the array_index_mask_nospec() instruction sequence, so mark the asm() volatile. Mark explains: "The volatile will inhibit *some* cases where the compiler could lift the array_index_nospec() call out of a branch, e.g. where there are multiple invocations of array_index_nospec() with the same arguments: if (idx < foo) { idx1 = array_idx_nospec(idx, foo) do_something(idx1); } < some other code > if (idx < foo) { idx2 = array_idx_nospec(idx, foo); do_something_else(idx2); } ... since the compiler can determine that the two invocations yield the same result, and reuse the first result (likely the same register as idx was in originally) for the second branch, effectively re-writing the above as: if (idx < foo) { idx = array_idx_nospec(idx, foo); do_something(idx); } < some other code > if (idx < foo) { do_something_else(idx); } ... if we don't take the first branch, then speculatively take the second, we lose the nospec protection. There's more info on volatile asm in the GCC docs: https://gcc.gnu.org/onlinedocs/gcc/Extended-Asm.html#Volatile " Reported-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Acked-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: <stable@vger.kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Fixes: babdde26 ("x86: Implement array_index_mask_nospec") Link: https://lkml.kernel.org/lkml/152838798950.14521.4893346294059739135.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Stefan Potyra authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit 955bc613 upstream. According to the API, you may only call clk_get_rate() after actually enabling it. Found by Linux Driver Verification project (linuxtesting.org). Fixes: a5fd9139 ("w1: add 1-wire master driver for i.MX27 / i.MX31") Signed-off-by:
Stefan Potyra <Stefan.Potyra@elektrobit.com> Acked-by:
-
Hans de Goede authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit 2cfce3a8 upstream. Commit 184add2c ("libata: Apply NOLPM quirk for SanDisk SD7UB3Q*G1001 SSDs") disabled LPM for SanDisk SD7UB3Q*G1001 SSDs. This has lead to several reports of users of that SSD where LPM was working fine and who know have a significantly increased idle power consumption on their laptops. Likely there is another problem on the T450s from the original reporter which gets exposed by the uncore reaching deeper sleep states (higher PC-states) due to LPM being enabled. The problem as reported, a hardfreeze about once a day, already did not sound like it would be caused by LPM and the reports of the SSD working fine confirm this. The original reporter is ok with dropping the quirk. A X250 user has reported the same hard freeze problem and for him the problem went away after unrelated updates, I suspect some GPU driver stack changes fixed things. TL;DR: The original reporters problem were triggered by LPM but not an LPM issue, so drop the quirk for the SSD in question. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1583207 Cc: stable@vger.kernel.org Cc: Richard W.M. Jones <rjones@redhat.com> Cc: Lorenzo Dalrio <lorenzo.dalrio@gmail.com> Reported-by:
Lorenzo Dalrio <lorenzo.dalrio@gmail.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Acked-by:
"Richard W.M. Jones" <rjones@redhat.com> Signed-off-by:
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit 18c9a99b upstream. We read from the cdb[] buffer in ata_exec_internal_sg(). It has to be ATAPI_CDB_LEN (16) bytes long, but this buffer is only 12 bytes. Fixes: 21334205 ("libata: handle power transition of ODD") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Colin Ian King authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit 795ef788 upstream. Don't populate the arrays cdb on the stack, instead make them static. Makes the object code smaller by 230 bytes: Before: text data bss dec hex filename 3797 240 0 4037 fc5 drivers/ata/libata-zpodd.o After: text data bss dec hex filename 3407 400 0 3807 edf drivers/ata/libata-zpodd.o Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Tao Wang authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit c7d1f119 upstream. If the policy limits are updated via cpufreq_update_policy() and subsequently via sysfs, the limits stored in user_policy may be set incorrectly. For example, if both min and max are set via sysfs to the maximum available frequency, user_policy.min and user_policy.max will also be the maximum. If a policy notifier triggered by cpufreq_update_policy() lowers both the min and the max at this point, that change is not reflected by the user_policy limits, so if the max is updated again via sysfs to the same lower value, then user_policy.max will be lower than user_policy.min which shouldn't happen. In particular, if one of the policy CPUs is then taken offline and back online, cpufreq_set_policy() will fail for it due to a failing limits check. To prevent that from happening, initialize the min and max fields of the new_policy object to the ones stored in user_policy that were previously set via sysfs. Signed-off-by:
Kevin Wangtao <kevin.wangtao@hisilicon.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> [ rjw: Subject & changelog ] Cc: All applicable <stable@vger.kernel.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Dennis Wassenberg authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit 7eef32c1 upstream. This patch adds missing initialisation for HP 2013 UltraSlim Dock Line-In/Out PINs and activates keyboard mute/micmute leds for HP ProBook 640 G4 Signed-off-by:
Dennis Wassenberg <dennis.wassenberg@secunet.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Dennis Wassenberg authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit 2861751f upstream. This patch adds missing initialisation for HP 2013 UltraSlim Dock Line-In/Out PINs and activates keyboard mute/micmute leds for HP EliteBook 830 G5 Signed-off-by:
-
Bo Chen authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit a3aa60d5 upstream. When 'kzalloc()' fails in 'snd_hda_attach_pcm_stream()', a new pcm instance is created without setting its operators via 'snd_pcm_set_ops()'. Following operations on the new pcm instance can trigger kernel null pointer dereferences and cause kernel oops. This bug was found with my work on building a gray-box fault-injection tool for linux-kernel-module binaries. A kernel null pointer dereference was confirmed from line 'substream->ops->open()' in function 'snd_pcm_open_substream()' in file 'sound/core/pcm_native.c'. This patch fixes the bug by calling 'snd_device_free()' in the error handling path of 'kzalloc()', which removes the new pcm instance from the snd card before returns with an error code. Signed-off-by:
Bo Chen <chenbo@pdx.edu> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Qu Wenruo authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit ac0b4145 upstream. [BUG] Btrfs can create compressed extent without checksum (even though it shouldn't), and if we then try to replace device containing such extent, the result device will contain all the uncompressed data instead of the compressed one. Test case already submitted to fstests: https://patchwork.kernel.org/patch/10442353/ [CAUSE] When handling compressed extent without checksum, device replace will goe into copy_nocow_pages() function. In that function, btrfs will get all inodes referring to this data extents and then use find_or_create_page() to get pages direct from that inode. The problem here is, pages directly from inode are always uncompressed. And for compressed data extent, they mismatch with on-disk data. Thus this leads to corrupted compressed data extent written to replace device. [FIX] In this attempt, we could just remove the "optimization" branch, and let unified scrub_pages() to handle it. Although scrub_pages() won't bother reusing page cache, it will be a little slower, but it does the correct csum checking and won't cause such data corruption caused by "optimization". Note about the fix: this is the minimal fix that can be backported to older stable trees without conflicts. The whole callchain from copy_nocow_pages() can be deleted, and will be in followup patches. Fixes: ff023aac ("Btrfs: add code to scrub to copy read data to another disk") CC: stable@vger.kernel.org # 4.4+ Reported-by:
James Harvey <jamespharvey20@gmail.com> Reviewed-by:
Qu Wenruo <wqu@suse.com> [ remove code removal, add note why ] Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Tetsuo Handa authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit 84d0c27d upstream. syzbot is hitting WARN() at kernfs_add_one() [1]. This is because kernfs_create_link() is confused by previous device_add() call which continued without setting dev->kobj.parent field when get_device_parent() failed by memory allocation fault injection. Fix this by propagating the error from class_dir_create_and_add() to the calllers of get_device_parent(). [1] https://syzkaller.appspot.com/bug?id=fae0fb607989ea744526d1c082a5b8de6529116fSigned-off-by:
syzbot <syzbot+df47f81c226b31d89fb1@syzkaller.appspotmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Jan Kara authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit 4f2f76f7 upstream. ext4_resize_fs() has an off-by-one bug when checking whether growing of a filesystem will not overflow inode count. As a result it allows a filesystem with 8192 inodes per group to grow to 64TB which overflows inode count to 0 and makes filesystem unusable. Fix it. Cc: stable@vger.kernel.org Fixes: 3f8a6411Reported-by:
Jaco Kroon <jaco@uls.co.za> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Reviewed-by:
Andreas Dilger <adilger@dilger.ca> Signed-off-by:
-
Lukas Czerner authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit eee597ac upstream. Currently in ext4_punch_hole we're going to skip the mtime update if there are no actual blocks to release. However we've actually modified the file by zeroing the partial block so the mtime should be updated. Moreover the sync and datasync handling is skipped as well, which is also wrong. Fix it. Signed-off-by:
Lukas Czerner <lczerner@redhat.com> Signed-off-by:
Joe Habermann <joe.habermann@quantum.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Frank van der Linden authored
BugLink: https://bugs.launchpad.net/bugs/1784382 [ Upstream commit 4fd44a98 ] commit 079096f1 ("tcp/dccp: install syn_recv requests into ehash table") introduced an optimization for the handling of child sockets created for a new TCP connection. But this optimization passes any data associated with the last ACK of the connection handshake up the stack without verifying its checksum, because it calls tcp_child_process(), which in turn calls tcp_rcv_state_process() directly. These lower-level processing functions do not do any checksum verification. Insert a tcp_checksum_complete call in the TCP_NEW_SYN_RECEIVE path to fix this. Fixes: 079096f1 ("tcp/dccp: install syn_recv requests into ehash table") Signed-off-by:
Frank van der Linden <fllinden@amazon.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Tested-by:
Balbir Singh <bsingharora@gmail.com> Reviewed-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Xiangning Yu authored
BugLink: https://bugs.launchpad.net/bugs/1784382 [ Upstream commit eb55bbf8 ] There is a timing issue under active-standy mode, when bond_enslave() is called, bond->params.primary might not be initialized yet. Any time the primary slave string changes, bond->force_primary should be set to true to make sure the primary becomes the active slave. Signed-off-by:
Xiangning Yu <yuxiangning@gmail.com> Signed-off-by:
-
Daniel Glöckner authored
BugLink: https://bugs.launchpad.net/bugs/1784382 [ Upstream commit ebc3dd68 ] It has been observed that writing 0xF2 to the power register while it reads as 0xF4 results in the register having the value 0xF0, i.e. clearing RESUME and setting SUSPENDM in one go does not work. It might also violate the USB spec to transition directly from resume to suspend, especially when not taking T_DRSMDN into account. But this is what happens when a remote wakeup occurs between SetPortFeature USB_PORT_FEAT_SUSPEND on the root hub and musb_bus_suspend being called. This commit returns -EBUSY when musb_bus_suspend is called while remote wakeup is signalled and thus avoids to reset the RESUME bit. Ignoring this error when musb_port_suspend is called from musb_hub_control is ok. Signed-off-by:
Daniel Glöckner <dg@emlix.com> Signed-off-by:
Bin Liu <b-liu@ti.com> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
-
Liu Bo authored
BugLink: https://bugs.launchpad.net/bugs/1784382 [ Upstream commit 8810f751 ] There is a scenario that can end up with rebuild process failing to return good content, i.e. suppose that all disks can be read without problems and if the content that was read out doesn't match its checksum, currently for raid6 btrfs at most retries twice, - the 1st retry is to rebuild with all other stripes, it'll eventually be a raid5 xor rebuild, - if the 1st fails, the 2nd retry will deliberately fail parity p so that it will do raid6 style rebuild, however, the chances are that another non-parity stripe content also has something corrupted, so that the above retries are not able to return correct content, and users will think of this as data loss. More seriouly, if the loss happens on some important internal btree roots, it could refuse to mount. This extends btrfs to do more retries and each retry fails only one stripe. Since raid6 can tolerate 2 disk failures, if there is one more failure besides the failure on which we're recovering, this can always work. The worst case is to retry as many times as the number of raid6 disks, but given the fact that such a scenario is really rare in practice, it's still acceptable. Signed-off-by:
Liu Bo <bo.li.liu@oracle.com> Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1784382 commit 02db5571 upstream. While rcvbuf is properly clamped by tcp_rmem[2], rcvwin is left to a potentially too big value. It has no serious effect, since : 1) tcp_grow_window() has very strict checks. 2) window_clamp can be mangled by user space to any value anyway. tcp_init_buffer_space() and companions use tcp_full_space(), we use tcp_win_from_space() to avoid reloading sk->sk_rcvbuf Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Acked-by:
Wei Wang <weiwan@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Sasha Levin authored
BugLink: https://bugs.launchpad.net/bugs/1784382 This reverts commit 95b286da. This commit used an incorrect log message. Reported-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Finn Thain authored
BugLink: https://bugs.launchpad.net/bugs/1784382 [ Upstream commit 26de0b76 ] With CONFIG_DMA_API_DEBUG=y, calling sonic_open() produces the message, "DMA-API: device driver failed to check map error". Add the missing dma_mapping_error() call. Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Acked-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
-
Josh Hill authored
BugLink: https://bugs.launchpad.net/bugs/1784382 [ Upstream commit 2415f3bd ] Add support for Netgear Aircard 779S Signed-off-by:
Josh Hill <josh@joshuajhill.com> Acked-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Ivan Bornyakov authored
BugLink: https://bugs.launchpad.net/bugs/1784382 [ Upstream commit f9c6442a ] memcmp() returns int, but eprom_try_esi() cast it to unsigned char. One can lose significant bits and get 0 from non-0 value returned by the memcmp(). Signed-off-by:
Ivan Bornyakov <brnkv.i1@gmail.com> Signed-off-by:
-
Julian Anastasov authored
BugLink: https://bugs.launchpad.net/bugs/1784382 [ Upstream commit 52f96757 ] syzkaller reports for buffer overflow for interface name when starting sync daemons [1] What we do is that we copy user structure into larger stack buffer but later we search NUL past the stack buffer. The same happens for sched_name when adding/editing virtual server. We are restricted by IP_VS_SCHEDNAME_MAXLEN and IP_VS_IFNAME_MAXLEN being used as size in include/uapi/linux/ip_vs.h, so they include the space for NUL. As using strlcpy is wrong for unsafe source, replace it with strscpy and add checks to return EINVAL if source string is not NUL-terminated. The incomplete strlcpy fix comes from 2.6.13. For the netlink interface reduce the len parameter for IPVS_DAEMON_ATTR_MCAST_IFN and IPVS_SVC_ATTR_SCHED_NAME, so that we get proper EINVAL. [1] kernel BUG at lib/string.c:1052! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 373 Comm: syz-executor936 Not tainted 4.17.0-rc4+ #45 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:fortify_panic+0x13/0x20 lib/string.c:1051 RSP: 0018:ffff8801c976f800 EFLAGS: 00010282 RAX: 0000000000000022 RBX: 0000000000000040 RCX: 0000000000000000 RDX: 0000000000000022 RSI: ffffffff8160f6f1 RDI: ffffed00392edef6 RBP: ffff8801c976f800 R08: ffff8801cf4c62c0 R09: ffffed003b5e4fb0 R10: ffffed003b5e4fb0 R11: ffff8801daf27d87 R12: ffff8801c976fa20 R13: ffff8801c976fae4 R14: ffff8801c976fae0 R15: 000000000000048b FS: 00007fd99f75e700(0000) GS:ffff8801daf00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000200001c0 CR3: 00000001d6843000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: strlen include/linux/string.h:270 [inline] strlcpy include/linux/string.h:293 [inline] do_ip_vs_set_ctl+0x31c/0x1d00 net/netfilter/ipvs/ip_vs_ctl.c:2388 nf_sockopt net/netfilter/nf_sockopt.c:106 [inline] nf_setsockopt+0x7d/0xd0 net/netfilter/nf_sockopt.c:115 ip_setsockopt+0xd8/0xf0 net/ipv4/ip_sockglue.c:1253 udp_setsockopt+0x62/0xa0 net/ipv4/udp.c:2487 ipv6_setsockopt+0x149/0x170 net/ipv6/ipv6_sockglue.c:917 tcp_setsockopt+0x93/0xe0 net/ipv4/tcp.c:3057 sock_common_setsockopt+0x9a/0xe0 net/core/sock.c:3046 __sys_setsockopt+0x1bd/0x390 net/socket.c:1903 __do_sys_setsockopt net/socket.c:1914 [inline] __se_sys_setsockopt net/socket.c:1911 [inline] __x64_sys_setsockopt+0xbe/0x150 net/socket.c:1911 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x447369 RSP: 002b:00007fd99f75dda8 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 00000000006e39e4 RCX: 0000000000447369 RDX: 000000000000048b RSI: 0000000000000000 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000018 R09: 0000000000000000 R10: 00000000200001c0 R11: 0000000000000246 R12: 00000000006e39e0 R13: 75a1ff93f0896195 R14: 6f745f3168746576 R15: 0000000000000001 Code: 08 5b 41 5c 41 5d 41 5e 41 5f 5d c3 0f 0b 48 89 df e8 d2 8f 48 fa eb de 55 48 89 fe 48 c7 c7 60 65 64 88 48 89 e5 e8 91 dd f3 f9 <0f> 0b 90 90 90 90 90 90 90 90 90 90 90 55 48 89 e5 41 57 41 56 RIP: fortify_panic+0x13/0x20 lib/string.c:1051 RSP: ffff8801c976f800 Reported-and-tested-by: syzbot+aac887f77319868646df@syzkaller.appspotmail.com Fixes: e4ff6751 ("ipvs: add sync_maxlen parameter for the sync daemon") Fixes: 4da62fc7 ("[IPVS]: Fix for overflows") Signed-off-by:
Julian Anastasov <ja@ssi.bg> Acked-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
