- 10 Mar, 2020 8 commits
-
-
Alain Volmat authored
Add a new stm32mp15 specific compatible to handle FastMode+ registers handling which is different on the stm32mp15 compared to the stm32f7 or stm32h7. Indeed, on the stm32mp15, the FastMode+ set and clear registers are separated while on the other platforms (F7 or H7) the control is done in a unique register. Signed-off-by:
Alain Volmat <alain.volmat@st.com> Reviewed-by:
Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de>
-
Alain Volmat authored
Defer the initial enabling of the Fast Mode Plus bits after the stm32f7_i2c_setup_timing call in probe function in order to avoid enabling them if speed is downgraded. Clear & restore the Fast Mode Plus bits in the suspend/resume handlers of the driver. Signed-off-by:
Alain Volmat <alain.volmat@st.com> Reviewed-by:
Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de>
-
Maxime Ripard authored
The HDMI blocks in the BCM2771 have an i2c controller to retrieve the EDID. This block is split into two parts, the BSC and the AUTO_I2C, lying in two separate register areas. The AUTO_I2C block has a mailbox-like interface and will take away the BSC control from the CPU if enabled. However, the BSC is the actually the same controller than the one supported by the brcmstb driver, and the AUTO_I2C doesn't really bring any immediate benefit. Let's use the BSC then, but let's also tie the AUTO_I2C registers with a separate compatible so that we can enable AUTO_I2C if needed in the future. The AUTO_I2C is enabled by default at boot though, so we first need to release the BSC from the AUTO_I2C control. Cc: Kamal Dasu <kdasu.kdev@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: bcm-kernel-feedback-list@broadcom.com Cc: linux-i2c@vger.kernel.org Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de>
-
Maxime Ripard authored
The HDMI blocks in the BCM2771 have an i2c controller to retrieve the EDID. This block is split into two parts, the BSC and the AUTO_I2C, lying in two separate register areas. The AUTO_I2C block has a mailbox-like interface and will take away the BSC control from the CPU if enabled. However, the BSC is the actually the same controller than the one supported by the brcmstb driver, and the AUTO_I2C doesn't really bring any immediate benefit. We can model it in the DT as a single device with two register range, which will allow us to use or or the other in the driver without changing anything in the DT. Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de>
-
Maxime Ripard authored
Switch the DT binding to a YAML schema to enable the DT validation. Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de>
-
chenqiwu authored
Use a new API devm_platform_ioremap_resource() to simplify code. Signed-off-by:
chenqiwu <chenqiwu@xiaomi.com> Tested-by:
Luca Ceresoli <luca@lucaceresoli.net> Reviewed-by:
Luca Ceresoli <luca@lucaceresoli.net> Reviewed-by:
Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de>
-
chenqiwu authored
Use kobj_to_dev() API instead of container_of(). Signed-off-by:
chenqiwu <chenqiwu@xiaomi.com> Reviewed-by:
Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de>
-
Wolfram Sang authored
The comment had some flaws which are now fixed: - the prefix is 'MAC' not 'AAPL' - no kernel coding style and too short length - 'we do' instead of 'we to' Signed-off-by:
Wolfram Sang <wsa@the-dreams.de>
-
- 26 Feb, 2020 5 commits
-
-
Wolfram Sang authored
Signed-off-by:
Wolfram Sang <wsa@the-dreams.de>
-
Alain Volmat authored
Allow the i2c-stm32f7 controller to become a wakeup-source of the system. In such case, when a slave is registered to the I2C controller, receiving a I2C message targeting that registered slave address wakes up the suspended system. In order to be able to wake-up, the I2C controller DT node must have the property wakeup-source defined and a slave must be registered. Signed-off-by:
Alain Volmat <alain.volmat@st.com> Reviewed-by:
Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de>
-
Stefan Lengfeld authored
Rework the read and write code paths in the driver to support operation in atomic contexts. To achieve this, the driver must not rely on IRQs and not call schedule(), e.g. via a sleep routine, in these cases. With this patch the driver supports normal operation, DMA transfers and now the polling mode or also called sleep-free or IRQ-less operation. It makes the code not simpler or easier to read, but atomic I2C transfers are needed on some hardware configurations, e.g. to trigger reboots on an external PMIC chip. Signed-off-by:
Stefan Lengfeld <contact@stefanchrist.eu> [m.felsch@pengutronix.de: integrate https://patchwork.ozlabs.org/patch/1085943/ review feedback] [m.felsch@pengutronix.de: adapt commit message] Signed-off-by:
Marco Felsch <m.felsch@pengutronix.de> Acked-by:
Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by:
Stefan Agner <stefan@agner.ch> Tested-by:
Stefan Lengfeld <contact@stefanchrist.eu> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de>
-
Kamel Bouhara authored
Implement i2c bus recovery when slaves devices might hold SDA low. In this case re-assign SCL/SDA to gpios and issue 9 dummy clock pulses until the slave release SDA. Signed-off-by:
Kamel Bouhara <kamel.bouhara@bootlin.com> Signed-off-by:
Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Acked-by:
Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de>
-
Kamel Bouhara authored
The at91 I2C controller can support bus recovery by re-assigning SCL and SDA to gpios. Add the optional pinctrl and gpio properties to do so. Signed-off-by:
Kamel Bouhara <kamel.bouhara@bootlin.com> [codrin.ciubotariu@microchip.com: rebased] Signed-off-by:
Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Reviewed-by:
Rob Herring <robh@kernel.org> Acked-by:
Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de>
-
- 24 Feb, 2020 1 commit
-
-
Linus Torvalds authored
-
- 23 Feb, 2020 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: "These are fixes that were found during testing with help of error injection, plus some other stable material. There's a fixup to patch added to rc1 causing locking in wrong context warnings, tests found one more deadlock scenario. The patches are tagged for stable, two of them now in the queue but we'd like all three released at the same time. I'm not happy about fixes to fixes in such a fast succession during rcs, but I hope we found all the fallouts of commit 28553fa9 ('Btrfs: fix race between shrinking truncate and fiemap')" * tag 'for-5.6-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: Btrfs: fix deadlock during fast fsync when logging prealloc extents beyond eof Btrfs: fix btrfs_wait_ordered_range() so that it waits for all ordered extents btrfs: fix bytes_may_use underflow in prealloc error condtition btrfs: handle logged extent failure properly btrfs: do not check delayed items are empty for single transaction cleanup btrfs: reset fs_root to NULL on error in open_ctree btrfs: destroy qgroup extent records on transaction abort
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "More miscellaneous ext4 bug fixes (all stable fodder)" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix mount failure with quota configured as module jbd2: fix ocfs2 corrupt when clearing block group bits ext4: fix race between writepages and enabling EXT4_EXTENTS_FL ext4: rename s_journal_flag_rwsem to s_writepages_rwsem ext4: fix potential race between s_flex_groups online resizing and access ext4: fix potential race between s_group_info online resizing and access ext4: fix potential race between online resizing and write operations ext4: add cond_resched() to __ext4_find_entry() ext4: fix a data race in EXT4_I(inode)->i_disksize
-
git://github.com/c-sky/csky-linuxLinus Torvalds authored
Pull csky updates from Guo Ren: "Sorry, I missed 5.6-rc1 merge window, but in this pull request the most are the fixes and the rests are between fixes and features. The only outside modification is the MAINTAINERS file update with our mailing list. - cache flush implementation fixes - ftrace modify panic fix - CONFIG_SMP boot problem fix - fix pt_regs saving for atomic.S - fix fixaddr_init without highmem. - fix stack protector support - fix fake Tightly-Coupled Memory code compile and use - fix some typos and coding convention" * tag 'csky-for-linus-5.6-rc3' of git://github.com/c-sky/csky-linux: (23 commits) csky: Replace <linux/clk-provider.h> by <linux/of_clk.h> csky: Implement copy_thread_tls csky: Add PCI support csky: Minimize defconfig to support buildroot config.fragment csky: Add setup_initrd check code csky: Cleanup old Kconfig options arch/csky: fix some Kconfig typos csky: Fixup compile warning for three unimplemented syscalls csky: Remove unused cache implementation csky: Fixup ftrace modify panic csky: Add flush_icache_mm to defer flush icache all csky: Optimize abiv2 copy_to_user_page with VM_EXEC csky: Enable defer flush_dcache_page for abiv2 cpus (807/810/860) csky: Remove unnecessary flush_icache_* implementation csky: Support icache flush without specific instructions csky/Kconfig: Add Kconfig.platforms to support some drivers csky/smp: Fixup boot failed when CONFIG_SMP csky: Set regs->usp to kernel sp, when the exception is from kernel csky/mm: Fixup export invalid_pte_table symbol csky: Separate fixaddr_init from highmem ...
-
Geert Uytterhoeven authored
The C-Sky platform code is not a clock provider, and just needs to call of_clk_init(). Hence it can include <linux/of_clk.h> instead of <linux/clk-provider.h>. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Guo Ren <guoren@linux.alibaba.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull RAS fixes from Thomas Gleixner: "Two fixes for the AMD MCE driver: - Populate the per CPU MCA bank descriptor pointer only after it has been completely set up to prevent a use-after-free in case that one of the subsequent initialization step fails - Implement a proper release function for the sysfs entries of MCA threshold controls instead of freeing the memory right in the CPU teardown code, which leads to another use-after-free when the associated sysfs file is opened and accessed" * tag 'ras-urgent-2020-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce/amd: Fix kobject lifetime x86/mce/amd: Publish the bank pointer only after setup has succeeded
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Thomas Gleixner: "Two fixes for the irq core code which are follow ups to the recent MSI fixes: - The WARN_ON which was put into the MSI setaffinity callback for paranoia reasons actually triggered via a callchain which escaped when all the possible ways to reach that code were analyzed. The proc/irq/$N/*affinity interfaces have a quirk which came in when ALPHA moved to the generic interface: In case that the written affinity mask does not contain any online CPU it calls into ALPHAs magic auto affinity setting code. A few years later this mechanism was also made available to x86 for no good reasons and in a way which circumvents all sanity checks for interrupts which cannot have their affinity set from process context on X86 due to the way the X86 interrupt delivery works. It would be possible to make this work properly, but there is no point in doing so. If the interrupt is not yet started then the affinity setting has no effect and if it is started already then it is already assigned to an online CPU so there is no point to randomly move it to some other CPU. Just return EINVAL as the code has done before that change forever. - The new MSI quirk bit in the irq domain flags turned out to be already occupied, which escaped the author and the reviewers because the already in use bits were 0,6,2,3,4,5 listed in that order. That bit 6 was simply overlooked because the ordering was straight forward linear otherwise. So the new bit ended up being a duplicate. Fix it up by switching the oddball 6 to the obvious 1" * tag 'irq-urgent-2020-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/irqdomain: Make sure all irq domain flags are distinct genirq/proc: Reject invalid affinity masks (again)
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "Two fixes for x86: - Remove the __force_oder definiton from the kaslr boot code as it is already defined in the page table code which makes GCC 10 builds fail because it changed the default to -fno-common. - Address the AMD erratum 1054 concerning the IRPERF capability and enable the Instructions Retired fixed counter on machines which are not affected by the erratum" * tag 'x86-urgent-2020-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu/amd: Enable the fixed Instructions Retired counter IRPERF x86/boot/compressed: Don't declare __force_order in kaslr_64.c
-
- 22 Feb, 2020 15 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefsLinus Torvalds authored
Pull zonefs fix from Damien Le Moal: "A single patch fixing typos in the documentation file" * tag 'zonefs-5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs: zonefs: fix documentation typos etc.
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: "Here's a small collection of fixes that were queued up: - Remove unnecessary NULL check (Dan) - Missing io_req_cancelled() call in fallocate (Pavel) - Put the cleanup check for aux data in the right spot (Pavel) - Two fixes for SQPOLL (Stefano, Xiaoguang)" * tag 'io_uring-5.6-2020-02-22' of git://git.kernel.dk/linux-block: io_uring: fix __io_iopoll_check deadlock in io_sq_thread io_uring: prevent sq_thread from spinning when it should stop io_uring: fix use-after-free by io_cleanup_req() io_uring: remove unnecessary NULL checks io_uring: add missing io_req_cancelled()
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "Just a set of NVMe fixes via Keith" * tag 'block-5.6-2020-02-22' of git://git.kernel.dk/linux-block: nvme-multipath: Fix memory leak with ana_log_buf nvme: Fix uninitialized-variable warning nvme-pci: Use single IRQ vector for old Apple models nvme/pci: Add sleep quirk for Samsung and Toshiba drives
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Four non-core fixes. Two are reverts of target fixes which turned out to have unwanted side effects, one is a revert of an RDMA fix with the same problem and the final one fixes an incorrect warning about memory allocation failures in megaraid_sas (the driver actually reduces the allocation size until it succeeds)" Signed-off-by:
James E.J. Bottomley <jejb@linux.ibm.com> * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: Revert "target: iscsi: Wait for all commands to finish before freeing a session" scsi: Revert "RDMA/isert: Fix a recently introduced regression related to logout" scsi: megaraid_sas: silence a warning scsi: Revert "target/core: Inline transport_lun_remove_cmd()"
-
Linus Torvalds authored
Merge tag 'hwmon-for-v5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - Fix crash in w83627ehf driver seen with W83627DHG-P - Fix lockdep splat in acpi_power_meter driver - Fix xdpe12284 documentation Sphinx warnings * tag 'hwmon-for-v5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (w83627ehf) Fix crash seen with W83627DHG-P hwmon: (acpi_power_meter) Fix lockdep splat Documentation/hwmon: fix xdpe12284 Sphinx warnings
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull devicetree fixes deom Rob Herring: "A handful of fixes in DT bindings for MDIO bus, Allwinner CSI, OMAP HSMMC, and Tegra124 EMC" * tag 'devicetree-fixes-for-5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: media: csi: Fix clocks description dt-bindings: media: csi: Add interconnects properties dt-bindings: net: mdio: remove compatible string from example dt-bindings: memory-controller: Update example for Tegra124 EMC dt-bindings: mmc: omap-hsmmc: Fix SDIO interrupt
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fixes from Vasily Gorbik: - Remove ieee_emulation_warnings sysctl which is a dead code. - Avoid triggering rebuild of the kernel during make install. - Enable protected virtualization guest support in default configs. - Fix cio_ignore seq_file .next function to increase position index. And use kobj_to_dev instead of container_of in cio code. - Fix storage block address lists to contain absolute addresses in qdio code. - Few clang warnings and spelling fixes. * tag 's390-5.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/qdio: fill SBALEs with absolute addresses s390/qdio: fill SL with absolute addresses s390: remove obsolete ieee_emulation_warnings s390: make 'install' not depend on vmlinux s390/kaslr: Fix casts in get_random s390/mm: Explicitly compare PAGE_DEFAULT_KEY against zero in storage_key_init_range s390/pkey/zcrypt: spelling s/crytp/crypt/ s390/cio: use kobj_to_dev() API s390/defconfig: enable CONFIG_PROTECTED_VIRTUALIZATION_GUEST s390/cio: cio_ignore_proc_seq_next should increase position index
-
Xiaoguang Wang authored
Since commit a3a0e43f ("io_uring: don't enter poll loop if we have CQEs pending"), if we already events pending, we won't enter poll loop. In case SETUP_IOPOLL and SETUP_SQPOLL are both enabled, if app has been terminated and don't reap pending events which are already in cq ring, and there are some reqs in poll_list, io_sq_thread will enter __io_iopoll_check(), and find pending events, then return, this loop will never have a chance to exit. I have seen this issue in fio stress tests, to fix this issue, let io_sq_thread call io_iopoll_getevents() with argument 'min' being zero, and remove __io_iopoll_check(). Fixes: a3a0e43f ("io_uring: don't enter poll loop if we have CQEs pending") Signed-off-by:
Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Jan Kara authored
When CONFIG_QFMT_V2 is configured as a module, the test in ext4_feature_set_ok() fails and so mount of filesystems with quota or project features fails. Fix the test to use IS_ENABLED macro which works properly even for modules. Link: https://lore.kernel.org/r/20200221100835.9332-1-jack@suse.cz Fixes: d65d87a0 ("ext4: improve explanation of a mount failure caused by a misconfigured kernel") Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
-
wangyan authored
I found a NULL pointer dereference in ocfs2_block_group_clear_bits(). The running environment: kernel version: 4.19 A cluster with two nodes, 5 luns mounted on two nodes, and do some file operations like dd/fallocate/truncate/rm on every lun with storage network disconnection. The fallocate operation on dm-23-45 caused an null pointer dereference. The information of NULL pointer dereference as follows: [577992.878282] JBD2: Error -5 detected when updating journal superblock for dm-23-45. [577992.878290] Aborting journal on device dm-23-45. ... [577992.890778] JBD2: Error -5 detected when updating journal superblock for dm-24-46. [577992.890908] __journal_remove_journal_head: freeing b_committed_data [577992.890916] (fallocate,88392,52):ocfs2_extend_trans:474 ERROR: status = -30 [577992.890918] __journal_remove_journal_head: freeing b_committed_data [577992.890920] (fallocate,88392,52):ocfs2_rotate_tree_right:2500 ERROR: status = -30 [577992.890922] __journal_remove_journal_head: freeing b_committed_data [577992.890924] (fallocate,88392,52):ocfs2_do_insert_extent:4382 ERROR: status = -30 [577992.890928] (fallocate,88392,52):ocfs2_insert_extent:4842 ERROR: status = -30 [577992.890928] __journal_remove_journal_head: freeing b_committed_data [577992.890930] (fallocate,88392,52):ocfs2_add_clusters_in_btree:4947 ERROR: status = -30 [577992.890933] __journal_remove_journal_head: freeing b_committed_data [577992.890939] __journal_remove_journal_head: freeing b_committed_data [577992.890949] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 [577992.890950] Mem abort info: [577992.890951] ESR = 0x96000004 [577992.890952] Exception class = DABT (current EL), IL = 32 bits [577992.890952] SET = 0, FnV = 0 [577992.890953] EA = 0, S1PTW = 0 [577992.890954] Data abort info: [577992.890955] ISV = 0, ISS = 0x00000004 [577992.890956] CM = 0, WnR = 0 [577992.890958] user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000f8da07a9 [577992.890960] [0000000000000020] pgd=0000000000000000 [577992.890964] Internal error: Oops: 96000004 [#1] SMP [577992.890965] Process fallocate (pid: 88392, stack limit = 0x00000000013db2fd) [577992.890968] CPU: 52 PID: 88392 Comm: fallocate Kdump: loaded Tainted: G W OE 4.19.36 #1 [577992.890969] Hardware name: Huawei TaiShan 2280 V2/BC82AMDD, BIOS 0.98 08/25/2019 [577992.890971] pstate: 60400009 (nZCv daif +PAN -UAO) [577992.891054] pc : _ocfs2_free_suballoc_bits+0x63c/0x968 [ocfs2] [577992.891082] lr : _ocfs2_free_suballoc_bits+0x618/0x968 [ocfs2] [577992.891084] sp : ffff0000c8e2b810 [577992.891085] x29: ffff0000c8e2b820 x28: 0000000000000000 [577992.891087] x27: 00000000000006f3 x26: ffffa07957b02e70 [577992.891089] x25: ffff807c59d50000 x24: 00000000000006f2 [577992.891091] x23: 0000000000000001 x22: ffff807bd39abc30 [577992.891093] x21: ffff0000811d9000 x20: ffffa07535d6a000 [577992.891097] x19: ffff000001681638 x18: ffffffffffffffff [577992.891098] x17: 0000000000000000 x16: ffff000080a03df0 [577992.891100] x15: ffff0000811d9708 x14: 203d207375746174 [577992.891101] x13: 73203a524f525245 x12: 20373439343a6565 [577992.891103] x11: 0000000000000038 x10: 0101010101010101 [577992.891106] x9 : ffffa07c68a85d70 x8 : 7f7f7f7f7f7f7f7f [577992.891109] x7 : 0000000000000000 x6 : 0000000000000080 [577992.891110] x5 : 0000000000000000 x4 : 0000000000000002 [577992.891112] x3 : ffff000001713390 x2 : 2ff90f88b1c22f00 [577992.891114] x1 : ffff807bd39abc30 x0 : 0000000000000000 [577992.891116] Call trace: [577992.891139] _ocfs2_free_suballoc_bits+0x63c/0x968 [ocfs2] [577992.891162] _ocfs2_free_clusters+0x100/0x290 [ocfs2] [577992.891185] ocfs2_free_clusters+0x50/0x68 [ocfs2] [577992.891206] ocfs2_add_clusters_in_btree+0x198/0x5e0 [ocfs2] [577992.891227] ocfs2_add_inode_data+0x94/0xc8 [ocfs2] [577992.891248] ocfs2_extend_allocation+0x1bc/0x7a8 [ocfs2] [577992.891269] ocfs2_allocate_extents+0x14c/0x338 [ocfs2] [577992.891290] __ocfs2_change_file_space+0x3f8/0x610 [ocfs2] [577992.891309] ocfs2_fallocate+0xe4/0x128 [ocfs2] [577992.891316] vfs_fallocate+0x11c/0x250 [577992.891317] ksys_fallocate+0x54/0x88 [577992.891319] __arm64_sys_fallocate+0x28/0x38 [577992.891323] el0_svc_common+0x78/0x130 [577992.891325] el0_svc_handler+0x38/0x78 [577992.891327] el0_svc+0x8/0xc My analysis process as follows: ocfs2_fallocate __ocfs2_change_file_space ocfs2_allocate_extents ocfs2_extend_allocation ocfs2_add_inode_data ocfs2_add_clusters_in_btree ocfs2_insert_extent ocfs2_do_insert_extent ocfs2_rotate_tree_right ocfs2_extend_rotate_transaction ocfs2_extend_trans jbd2_journal_restart jbd2__journal_restart /* handle->h_transaction is NULL, * is_handle_aborted(handle) is true */ handle->h_transaction = NULL; start_this_handle return -EROFS; ocfs2_free_clusters _ocfs2_free_clusters _ocfs2_free_suballoc_bits ocfs2_block_group_clear_bits ocfs2_journal_access_gd __ocfs2_journal_access jbd2_journal_get_undo_access /* I think jbd2_write_access_granted() will * return true, because do_get_write_access() * will return -EROFS. */ if (jbd2_write_access_granted(...)) return 0; do_get_write_access /* handle->h_transaction is NULL, it will * return -EROFS here, so do_get_write_access() * was not called. */ if (is_handle_aborted(handle)) return -EROFS; /* bh2jh(group_bh) is NULL, caused NULL pointer dereference */ undo_bg = (struct ocfs2_group_desc *) bh2jh(group_bh)->b_committed_data; If handle->h_transaction == NULL, then jbd2_write_access_granted() does not really guarantee that journal_head will stay around, not even speaking of its b_committed_data. The bh2jh(group_bh) can be removed after ocfs2_journal_access_gd() and before call "bh2jh(group_bh)->b_committed_data". So, we should move is_handle_aborted() check from do_get_write_access() into jbd2_journal_get_undo_access() and jbd2_journal_get_write_access() before the call to jbd2_write_access_granted(). Link: https://lore.kernel.org/r/f72a623f-b3f1-381a-d91d-d22a1c83a336@huawei.comSigned-off-by:
Yan Wang <wangyan122@huawei.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Reviewed-by:
Jun Piao <piaojun@huawei.com> Reviewed-by:
Jan Kara <jack@suse.cz> Cc: stable@kernel.org
-
Eric Biggers authored
If EXT4_EXTENTS_FL is set on an inode while ext4_writepages() is running on it, the following warning in ext4_add_complete_io() can be hit: WARNING: CPU: 1 PID: 0 at fs/ext4/page-io.c:234 ext4_put_io_end_defer+0xf0/0x120 Here's a minimal reproducer (not 100% reliable) (root isn't required): while true; do sync done & while true; do rm -f file touch file chattr -e file echo X >> file chattr +e file done The problem is that in ext4_writepages(), ext4_should_dioread_nolock() (which only returns true on extent-based files) is checked once to set the number of reserved journal credits, and also again later to select the flags for ext4_map_blocks() and copy the reserved journal handle to ext4_io_end::handle. But if EXT4_EXTENTS_FL is being concurrently set, the first check can see dioread_nolock disabled while the later one can see it enabled, causing the reserved handle to unexpectedly be NULL. Since changing EXT4_EXTENTS_FL is uncommon, and there may be other races related to doing so as well, fix this by synchronizing changing EXT4_EXTENTS_FL with ext4_writepages() via the existing s_writepages_rwsem (previously called s_journal_flag_rwsem). This was originally reported by syzbot without a reproducer at https://syzkaller.appspot.com/bug?extid=2202a584a00fffd19fbf, but now that dioread_nolock is the default I also started seeing this when running syzkaller locally. Link: https://lore.kernel.org/r/20200219183047.47417-3-ebiggers@kernel.org Reported-by: syzbot+2202a584a00fffd19fbf@syzkaller.appspotmail.com Fixes: 6b523df4 ("ext4: use transaction reservation for extent conversion in ext4_end_io") Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Reviewed-by:
Jan Kara <jack@suse.cz> Cc: stable@kernel.org
-
Eric Biggers authored
In preparation for making s_journal_flag_rwsem synchronize ext4_writepages() with changes to both the EXTENTS and JOURNAL_DATA flags (rather than just JOURNAL_DATA as it does currently), rename it to s_writepages_rwsem. Link: https://lore.kernel.org/r/20200219183047.47417-2-ebiggers@kernel.orgSigned-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Reviewed-by:
Jan Kara <jack@suse.cz> Cc: stable@kernel.org
-
Suraj Jitindar Singh authored
During an online resize an array of s_flex_groups structures gets replaced so it can get enlarged. If there is a concurrent access to the array and this memory has been reused then this can lead to an invalid memory access. The s_flex_group array has been converted into an array of pointers rather than an array of structures. This is to ensure that the information contained in the structures cannot get out of sync during a resize due to an accessor updating the value in the old structure after it has been copied but before the array pointer is updated. Since the structures them- selves are no longer copied but only the pointers to them this case is mitigated. Link: https://bugzilla.kernel.org/show_bug.cgi?id=206443 Link: https://lore.kernel.org/r/20200221053458.730016-4-tytso@mit.eduSigned-off-by:
Suraj Jitindar Singh <surajjs@amazon.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen fixes from Juergen Gross: "Two small fixes for Xen: - a fix to avoid warnings with new gcc - a fix for incorrectly disabled interrupts when calling _cond_resched()" * tag 'for-linus-5.6-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: Enable interrupts when calling _cond_resched() x86/xen: Distribute switch variables for initialization
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Will Deacon: "It's all straightforward apart from the changes to mmap()/mremap() in relation to their handling of address arguments from userspace with non-zero tag bits in the upper byte. The change to brk() is necessary to fix a nasty user-visible regression in malloc(), but we tightened up mmap() and mremap() at the same time because they also allow the user to create virtual aliases by accident. It's much less likely than brk() to matter in practice, but enforcing the principle of "don't permit the creation of mappings using tagged addresses" leads to a straightforward ABI without having to worry about the "but what if a crazy program did foo?" aspect of things. Summary: - Fix regression in malloc() caused by ignored address tags in brk() - Add missing brackets around argument to untagged_addr() macro - Fix clang build when using binutils assembler - Fix silly typo in virtual memory map documentation" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: mm: Avoid creating virtual address aliases in brk()/mmap()/mremap() docs: arm64: fix trivial spelling enought to enough in memory.rst arm64: memory: Add missing brackets to untagged_addr() macro arm64: lse: Fix LSE atomics with LLVM
-
- 21 Feb, 2020 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: "Some more powerpc fixes for 5.6. This is two weeks worth as I was out sick last week: - Three fixes for the recently added VMAP_STACK on 32-bit. - Three fixes related to hugepages on 8xx (32-bit). - A fix for a bug in our transactional memory handling that could lead to a kernel crash if we saw a page fault during signal delivery. - A fix for a deadlock in our PCI EEH (Enhanced Error Handling) code. - A couple of other minor fixes. Thanks to: Christophe Leroy, Erhard F, Frederic Barrat, Gustavo Luiz Duarte, Larry Finger, Leonardo Bras, Oliver O'Halloran, Sam Bobroff" * tag 'powerpc-5.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/entry: Fix an #if which should be an #ifdef in entry_32.S powerpc/xmon: Fix whitespace handling in getstring() powerpc/6xx: Fix power_save_ppc32_restore() with CONFIG_VMAP_STACK powerpc/chrp: Fix enter_rtas() with CONFIG_VMAP_STACK powerpc/32s: Fix DSI and ISI exceptions for CONFIG_VMAP_STACK powerpc/tm: Fix clearing MSR[TS] in current when reclaiming on signal delivery powerpc/8xx: Fix clearing of bits 20-23 in ITLB miss powerpc/hugetlb: Fix 8M hugepages on 8xx powerpc/hugetlb: Fix 512k hugepages on 8xx with 16k page size powerpc/eeh: Fix deadlock handling dead PHB
-
git://www.linux-watchdog.org/linux-watchdogLinus Torvalds authored
Pull watchdog fixes from Wim Van Sebroeck: - mtk_wdt needs RESET_CONTROLLER to build - da9062 driver fixes: - fix power management ops - do not ping the hw during stop() - add dependency on I2C * tag 'linux-watchdog-5.6-rc3' of git://www.linux-watchdog.org/linux-watchdog: watchdog: da9062: Add dependency on I2C watchdog: da9062: fix power management ops watchdog: da9062: do not ping the hw during stop() watchdog: fix mtk_wdt.c RESET_CONTROLLER build error
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are some small char/misc driver fixes for 5.6-rc3. Also included in here are some updates for some documentation files that I seem to be maintaining these days. The driver fixes are: - small fixes for the habanalabs driver - fsi driver bugfix All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: Documentation/process: Swap out the ambassador for Canonical habanalabs: patched cb equals user cb in device memset habanalabs: do not halt CoreSight during hard reset habanalabs: halt the engines before hard-reset MAINTAINERS: remove unnecessary ':' characters fsi: aspeed: add unspecified HAS_IOMEM dependency COPYING: state that all contributions really are covered by this file Documentation/process: Change Microsoft contact for embargoed hardware issues embargoed-hardware-issues: drop Amazon contact as the email address now bounces Documentation/process: Add Arm contact for embargoed HW issues
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging driver fixes from Greg KH: "Here are some small staging driver fixes for 5.6-rc3, along with the removal of an unused/unneeded driver as well. The android vsoc driver is not needed anymore by anyone, so it was removed. The other driver fixes are: - ashmem bugfixes - greybus audio driver bugfix - wireless driver bugfixes and tiny cleanups to error paths All of these have been in linux-next for a while now with no reported issues" * tag 'staging-5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: rtl8723bs: Remove unneeded goto statements staging: rtl8188eu: Remove some unneeded goto statements staging: rtl8723bs: Fix potential overuse of kernel memory staging: rtl8188eu: Fix potential overuse of kernel memory staging: rtl8723bs: Fix potential security hole staging: rtl8188eu: Fix potential security hole staging: greybus: use after free in gb_audio_manager_remove_all() staging: android: Delete the 'vsoc' driver staging: rtl8723bs: fix copy of overlapping memory staging: android: ashmem: Disallow ashmem memory from being remapped staging: vt6656: fix sign of rx_dbm to bb_pre_ed_rssi.
-