* acpi-cleanup:
  ACPI: Clean up memory allocations

* acpi-thermal:
  ACPI / thermal: Fix wrong variable usage in debug statement

* acpi-video:
  ACPI / video: Favor native backlight interface for ThinkPad Helix

* acpi-dock:
  ACPI / dock: Drop dock_device_ids[] table

* pm-cpufreq:
  cpufreq: ppc: Remove duplicate inclusion of fsl_soc.h
  cpufreq: create another field .flags in cpufreq_frequency_table
  cpufreq: use kzalloc() to allocate memory for cpufreq_frequency_table
  cpufreq: don't print value of .driver_data from core
  cpufreq: ia64: don't set .driver_data to index
  cpufreq: powernv: Select CPUFreq related Kconfig options for powernv
  cpufreq: powernv: Use cpufreq_frequency_table.driver_data to store pstate ids
  cpufreq: powernv: cpufreq driver for powernv platform
  cpufreq: at32ap: don't declare local variable as static
  cpufreq: loongson2_cpufreq: don't declare local variable as static
  cpufreq: unicore32: fix typo issue for 'clk'
  cpufreq: exynos: Disable on multiplatform build

* pm-cpuidle:
  cpuidle: sysfs: Export target residency information
  intel_idle: fine-tune IVT residency targets
  tools/power turbostat: Run on Broadwell
  tools/power turbostat: simplify output, add Avg_MHz
  intel_idle: Add CPU model 54 (Atom N2000 series)
  intel_idle: support Bay Trail
  intel_idle: allow sparse sub-state numbering, for Bay Trail
  ACPI idle: permit sparse C-state sub-state numbers

Pull intel_idle and turbostat material for v3.15-rc1 from Len Brown.

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
  intel_idle: fine-tune IVT residency targets
  tools/power turbostat: Run on Broadwell
  tools/power turbostat: simplify output, add Avg_MHz
  intel_idle: Add CPU model 54 (Atom N2000 series)
  intel_idle: support Bay Trail
  intel_idle: allow sparse sub-state numbering, for Bay Trail
  ACPI idle: permit sparse C-state sub-state numbers

* cpu-hotplug:
  arm, kvm: fix double lock on cpu_add_remove_lock

Commit 8146875d (arm, kvm: Fix CPU hotplug callback registration)
holds the lock before calling the two functions:

	kvm_vgic_hyp_init()
	kvm_timer_hyp_init()

and both the two functions are calling register_cpu_notifier()
to register cpu notifier, so cause double lock on cpu_add_remove_lock.

Considered that both two functions are only called inside
kvm_arch_init() with holding cpu_add_remove_lock, so simply use
__register_cpu_notifier() to fix the problem.

Fixes: 8146875d (arm, kvm: Fix CPU hotplug callback registration)
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

From user space, there is no way to know the target residency for each idle
state. If we want to write tools to measure the accuracy of the idle state
selection from the governor, we need this info.

As the exit latency is exported through sysfs, exporting the target residency
in the same place makes sense.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

fsl_soc.h was included twice.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull CPU hotplug notifiers registration fixes from Rafael Wysocki:
 "The purpose of this single series of commits from Srivatsa S Bhat
  (with a small piece from Gautham R Shenoy) touching multiple
  subsystems that use CPU hotplug notifiers is to provide a way to
  register them that will not lead to deadlocks with CPU online/offline
  operations as described in the changelog of commit 93ae4f97 ("CPU
  hotplug: Provide lockless versions of callback registration
  functions").

  The first three commits in the series introduce the API and document
  it and the rest simply goes through the users of CPU hotplug notifiers
  and converts them to using the new method"

* tag 'cpu-hotplug-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (52 commits)
  net/iucv/iucv.c: Fix CPU hotplug callback registration
  net/core/flow.c: Fix CPU hotplug callback registration
  mm, zswap: Fix CPU hotplug callback registration
  mm, vmstat: Fix CPU hotplug callback registration
  profile: Fix CPU hotplug callback registration
  trace, ring-buffer: Fix CPU hotplug callback registration
  xen, balloon: Fix CPU hotplug callback registration
  hwmon, via-cputemp: Fix CPU hotplug callback registration
  hwmon, coretemp: Fix CPU hotplug callback registration
  thermal, x86-pkg-temp: Fix CPU hotplug callback registration
  octeon, watchdog: Fix CPU hotplug callback registration
  oprofile, nmi-timer: Fix CPU hotplug callback registration
  intel-idle: Fix CPU hotplug callback registration
  clocksource, dummy-timer: Fix CPU hotplug callback registration
  drivers/base/topology.c: Fix CPU hotplug callback registration
  acpi-cpufreq: Fix CPU hotplug callback registration
  zsmalloc: Fix CPU hotplug callback registration
  scsi, fcoe: Fix CPU hotplug callback registration
  scsi, bnx2fc: Fix CPU hotplug callback registration
  scsi, bnx2i: Fix CPU hotplug callback registration
  ...

This is the final piece in the puzzle, as all patches to remove the
last users of \(interruptible_\|\)sleep_on\(_timeout\|\) have made it
into the 3.15 merge window. The work was long overdue, and this
interface in particular should not have survived the BKL removal
that was done a couple of years ago.

Citing Jon Corbet from http://lwn.net/2001/0201/kernel.php3":

 "[...] it was suggested that the janitors look for and fix all code
  that calls sleep_on() [...] since (1) almost all such code is
  incorrect, and (2) Linus has agreed that those functions should
  be removed in the 2.5 development series".

We haven't quite made it for 2.5, but maybe we can merge this for 3.15.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull Ceph updates from Sage Weil:
 "The biggest chunk is a series of patches from Ilya that add support
  for new Ceph osd and crush map features, including some new tunables,
  primary affinity, and the new encoding that is needed for erasure
  coding support.  This brings things into parity with the server side
  and the looming firefly release.  There is also support for allocation
  hints in RBD that help limit fragmentation on the server side.

  There is also a series of patches from Zheng fixing NFS reexport,
  directory fragmentation support, flock vs fnctl behavior, and some
  issues with clustered MDS.

  Finally, there are some miscellaneous fixes from Yunchuan Wen for
  fscache, Fabian Frederick for ACLs, and from me for fsync(dirfd)
  behavior"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (79 commits)
  ceph: skip invalid dentry during dcache readdir
  libceph: dump pool {read,write}_tier to debugfs
  libceph: output primary affinity values on osdmap updates
  ceph: flush cap release queue when trimming session caps
  ceph: don't grabs open file reference for aborted request
  ceph: drop extra open file reference in ceph_atomic_open()
  ceph: preallocate buffer for readdir reply
  libceph: enable PRIMARY_AFFINITY feature bit
  libceph: redo ceph_calc_pg_primary() in terms of ceph_calc_pg_acting()
  libceph: add support for osd primary affinity
  libceph: add support for primary_temp mappings
  libceph: return primary from ceph_calc_pg_acting()
  libceph: switch ceph_calc_pg_acting() to new helpers
  libceph: introduce apply_temps() helper
  libceph: introduce pg_to_raw_osds() and raw_to_up_osds() helpers
  libceph: ceph_can_shift_osds(pool) and pool type defines
  libceph: ceph_osd_{exists,is_up,is_down}(osd) definitions
  libceph: enable OSDMAP_ENC feature bit
  libceph: primary_affinity decode bits
  libceph: primary_affinity infrastructure
  ...

Pull f2fs updates from Jaegeuk Kim:
 "This patch-set includes the following major enhancement patches.
   - introduce large directory support
   - introduce f2fs_issue_flush to merge redundant flush commands
   - merge write IOs as much as possible aligned to the segment
   - add sysfs entries to tune the f2fs configuration
   - use radix_tree for the free_nid_list to reduce in-memory operations
   - remove costly bit operations in f2fs_find_entry
   - enhance the readahead flow for CP/NAT/SIT/SSA blocks

  The other bug fixes are as follows:
   - recover xattr node blocks correctly after sudden-power-cut
   - fix to calculate the maximum number of node ids
   - enhance to handle many error cases

  And, there are a bunch of cleanups"

* tag 'for-f2fs-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (62 commits)
  f2fs: fix wrong statistics of inline data
  f2fs: check the acl's validity before setting
  f2fs: introduce f2fs_issue_flush to avoid redundant flush issue
  f2fs: fix to cover io->bio with io_rwsem
  f2fs: fix error path when fail to read inline data
  f2fs: use list_for_each_entry{_safe} for simplyfying code
  f2fs: avoid free slab cache under spinlock
  f2fs: avoid unneeded lookup when xattr name length is too long
  f2fs: avoid unnecessary bio submit when wait page writeback
  f2fs: return -EIO when node id is not matched
  f2fs: avoid RECLAIM_FS-ON-W warning
  f2fs: skip unnecessary node writes during fsync
  f2fs: introduce fi->i_sem to protect fi's info
  f2fs: change reclaim rate in percentage
  f2fs: add missing documentation for dir_level
  f2fs: remove unnecessary threshold
  f2fs: throttle the memory footprint with a sysfs entry
  f2fs: avoid to drop nat entries due to the negative nr_shrink
  f2fs: call f2fs_wait_on_page_writeback instead of native function
  f2fs: introduce nr_pages_to_write for segment alignment
  ...

Pull OMAP fbdev changes from Tomi Valkeinen:
 "This is based on the already pulled fbdev-main changes, and this also
  merges .dts branch from Tony Lindgren (which has also been pulled), so
  that I was able to add the display related .dts changes.

  This contains OMAP related fbdev changes for 3.15.  The bulk of the
  patches are for adding Device Tree support for OMAP Display Subsystem:

   - SoCs: OMAP2/3/4

   - Boards: OMAP4 Panda, OMAP4 SDP, OMAP3 Beagle, OMAP3 Beagle-xM,
     OMAP3 IGEP0020, OMAP3 N900

   - Devices: TFP410 Encoder, tpd12s015 HDMI companion chip, Sony
     acx565akm panel, MIPI DSI Command mode panel and HDMI, DVI and
     Analog TV connectors"

* tag 'fbdev-omap-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (45 commits)
  OMAPDSS: HDMI: fix interlace output
  OMAPDSS: add missing __init for dss_init_ports
  ARM: OMAP2+: remove pdata quirks for displays
  OMAPDSS: remove DT hacks for regulators
  Doc/DT: Add DT binding documentation for tpd12s015 encoder
  Doc/DT: Add DT binding documentation for TFP410 encoder
  Doc/DT: Add DT binding documentation for Sony acx565akm panel
  Doc/DT: Add DT binding documentation for MIPI DSI CM Panel
  Doc/DT: Add DT binding documentation for HDMI Connector
  Doc/DT: Add DT binding documentation for DVI Connector
  Doc/DT: Add DT binding documentation for Analog TV Connector
  ARM: omap3-n900.dts: add display information
  ARM: omap3-igep0020.dts: add display information
  ARM: omap3-beagle-xm.dts: add display information
  ARM: omap3-beagle.dts: add display information
  ARM: omap4-sdp.dts: add display information
  Doc/DT: Add DT binding documentation for OMAP DSS
  OMAPDSS: acx565akm: Add DT support
  OMAPDSS: connector-analog-tv: Add DT support
  OMAPDSS: hdmi-connector: Add DT support
  ...

Pull MFD updates from Lee Jones:
 "Changes to existing drivers:
   - Use of managed resources - omap, twl4030, ti_am335x_tscadc
   - Advanced error handling - omap
   - Rework clk management - omap
   - Device Tree (re-)work - tc3589x, pm8921, da9055, sec
   - IRC management overhaul and !BROKEN - pm8921
   - Convert to regmap - ssbi, pm8921
   - Use simple power-management ops - ucb1x00
   - Include file clean-up - adp5520, cs5535, janz, lpc_ich,
      - lpc_sch, max14577, mcp-sa11x0, pcf50633-adc, rc5t583,
      	rdc321x-southbridge, retu, smsc-ece1099, ti-ssp, ti_am335x_tscadc,
	tps65912, vexpress-config, wm8350, ywm8350
   - Various bug fixes across the subsystem
      - NULL/invalid pointer dereference prevention
      - Resource leak mitigation,
      - Variable used initialised
      - Staticise various containers
      - Enforce return value checks

  New drivers/supported devices:
   - Add support for s2mps14 and s2mpa01 to sec
   - Add support for da9063 (v5) to da9063
   - Add support for atom-c2000 to gpio-ich
   - Add support for come-{mbt10,cbt6,chl6} to kempld
   - Add support for da9053 to da9052
   - Add support for itco-wdt (v3) and baytrail to lpc_ich
   - Add new drivers for tps65218, rtsx_usb, bcm590xx

  (Re-)moved drivers:
   - twl4030 ==> drivers/iio
   - ti-ssp  ==> /dev/null"

* tag 'mfd-for-linus-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (103 commits)
  mfd: wm5110: Correct default for HEADPHONE_DETECT_1
  mfd: arizona: Correct small errors in the DT binding documentation
  mfd: arizona: Mark DSP clocking register as volatile
  mfd: devicetree: bindings: Add pm8xxx RTC description
  mfd: kempld-core: Fix potential hang-up during boot
  mfd: sec-core: Fix uninitialized 'regmap_rtc' on S2MPA01
  mfd: tps65910: Fix regmap_irq_chip_data leak on mfd_add_devices fail
  mfd: tps65910: Fix possible invalid pointer dereference on regmap_add_irq_chip fail
  mfd: sec-core: Fix I2C dummy device resource leak on probe failure
  mfd: sec-core: Add of_compatible strings for clock MFD cells
  mfd: Remove obsolete ti-ssp driver
  Documentation: mfd: s2mps11: Describe S5M8767 and S2MPS14 clocks
  mfd: bcm590xx: Fix type argument for module device table
  mfd: lpc_ich: Add support for Intel Bay Trail SoC
  mfd: lpc_ich: Add support for NM10 GPIO
  mfd: lpc_ich: Change Avoton to iTCO v3
  watchdog: iTCO_wdt: Add support for v3 silicon
  mfd: lpc_ich: Add support for iTCO v3
  mfd: lpc_ich: Remove lpc_ich_cfg struct use
  mfd: lpc_ich: Only configure watchdog or GPIO when present
  ...

Pull MTD updates from Brian Norris:
 - A few SPI NOR ID definitions
 - Kill the NAND "max pagesize" restriction
 - Fix some x16 bus-width NAND support
 - Add NAND JEDEC parameter page support
 - DT bindings for NAND ECC
 - GPMI NAND updates (subpage reads)
 - More OMAP NAND refactoring
 - New STMicro SPI NOR driver (now in 40 patches!)
 - A few other random bugfixes

* tag 'for-linus-20140405' of git://git.infradead.org/linux-mtd: (120 commits)
  Fix index regression in nand_read_subpage
  mtd: diskonchip: mem resource name is not optional
  mtd: nand: fix mention to CONFIG_MTD_NAND_ECC_BCH
  mtd: nand: fix GET/SET_FEATURES address on 16-bit devices
  mtd: omap2: Use devm_ioremap_resource()
  mtd: denali_dt: Use devm_ioremap_resource()
  mtd: devices: elm: update DRIVER_NAME as "omap-elm"
  mtd: devices: elm: configure parallel channels based on ecc_steps
  mtd: devices: elm: clean elm_load_syndrome
  mtd: devices: elm: check for hardware engine's design constraints
  mtd: st_spi_fsm: Succinctly reorganise .remove()
  mtd: st_spi_fsm: Allow loop to run at least once before giving up CPU
  mtd: st_spi_fsm: Correct vendor name spelling issue - missing "M"
  mtd: st_spi_fsm: Avoid duplicating MTD core code
  mtd: st_spi_fsm: Remove useless consts from function arguments
  mtd: st_spi_fsm: Convert ST SPI FSM (NOR) Flash driver to new DT partitions
  mtd: st_spi_fsm: Move runtime configurable msg sequences into device's struct
  mtd: st_spi_fsm: Supply the W25Qxxx chip specific configuration call-back
  mtd: st_spi_fsm: Supply the S25FLxxx chip specific configuration call-back
  mtd: st_spi_fsm: Supply the MX25xxx chip specific configuration call-back
  ...

Currently cpufreq frequency table has two fields: frequency and driver_data.
driver_data is only for drivers' internal use and cpufreq core shouldn't use
it at all. But with the introduction of BOOST frequencies, this assumption
was broken and we started using it as a flag instead.

There are two problems due to this:
- It is against the description of this field, as driver's data is used by
  the core now.
- if drivers fill it with -3 for any frequency, then those frequencies are
  never considered by cpufreq core as it is exactly same as value of
  CPUFREQ_BOOST_FREQ, i.e. ~2.

The best way to get this fixed is by creating another field flags which
will be used for such flags. This patch does that. Along with that various
drivers need modifications due to the change of struct cpufreq_frequency_table.
Reviewed-by: Gautham R Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Few drivers are using kmalloc() to allocate memory for frequency
tables and since we will have an additional field '.flags' in
'struct cpufreq_frequency_table', these might become unstable.
Better get these fixed by replacing kmalloc() by kzalloc() instead.

Along with that we also remove use of .driver_data from SPEAr driver
as it doesn't use it at all. Also, writing zero to .driver_data is not
required for powernow-k8 as it is already zero.
Reported-and-reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

CPUFreq core doesn't control value of .driver_data and this field is
completely driver specific. This can contain any value and not only
indexes. For most of the drivers, which aren't using this field, its
value is zero. So, printing this from core doesn't make any sense.
Don't print it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

.driver_data field is only required to be filled if drivers want to
preserve some data in there which they can use according to the value
of .frequency. But this driver isn't using this field at all, but just
setting it equal to the index value. Which isn't required. Fix it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Enable CPUFreq for PowerNV. Select "performance", "powersave",
"userspace" and "ondemand" governors. Choose "ondemand" to be the
default governor.
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The .driver_data field in the cpufreq_frequency_table was supposed to
be private to the drivers. However at some later point, it was being
used to indicate if the particular frequency in the table is the
BOOST_FREQUENCY. After patches [1] and [2], the .driver_data is once
again private to the driver. Thus we can safely use
cpufreq_frequency_table.driver_data to store pstate_ids instead of
having to maintain a separate array powernv_pstate_ids[] for this
purpose.

[1]:
  Subject: cpufreq: don't print value of .driver_data from core
  From   : Viresh Kumar <viresh.kumar@ linaro.org>
  url    : http://marc.info/?l=linux-pm&m=139601421504709&w=2

[2]:
  Subject: cpufreq: create another field .flags in cpufreq_frequency_table
  From   : Viresh Kumar <viresh.kumar@linaro.org>
  url    : http://marc.info/?l=linux-pm&m=139601416804702&w=2Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Backend driver to dynamically set voltage and frequency on
IBM POWER non-virtualized platforms.  Power management SPRs
are used to set the required PState.

This driver works in conjunction with cpufreq governors
like 'ondemand' to provide a demand based frequency and
voltage setting on IBM POWER non-virtualized platforms.

PState table is obtained from OPAL v3 firmware through device
tree.

powernv_cpufreq back-end driver would parse the relevant device-tree
nodes and initialise the cpufreq subsystem on powernv platform.

The code was originally written by svaidy@linux.vnet.ibm.com. Over
time it was modified to accomodate bug-fixes as well as updates to the
the cpu-freq core. Relevant portions of the change logs corresponding
to those modifications are noted below:

 * The policy->cpus needs to be populated in a hotplug-invariant
   manner instead of using cpu_sibling_mask() which varies with
   cpu-hotplug. This is because the cpufreq core code copies this
   content into policy->related_cpus mask which should not vary on
   cpu-hotplug. [Authored by srivatsa.bhat@linux.vnet.ibm.com]

 * Create a helper routine that can return the cpu-frequency for the
   corresponding pstate_id. Also, cache the values of the pstate_max,
   pstate_min and pstate_nominal and nr_pstates in a static structure
   so that they can be reused in the future to perform any
   validations. [Authored by ego@linux.vnet.ibm.com]

 * Create a driver attribute named cpuinfo_nominal_freq which creates
   a sysfs read-only file named cpuinfo_nominal_freq. Export the
   frequency corresponding to the nominal_pstate through this
   interface.

     Nominal frequency is the highest non-turbo frequency for the
   platform.  This is generally used for setting governor policies
   from user space for optimal energy efficiency. [Authored by
   ego@linux.vnet.ibm.com]

 * Implement a powernv_cpufreq_get(unsigned int cpu) method which will
   return the current operating frequency. Export this via the sysfs
   interface cpuinfo_cur_freq by setting powernv_cpufreq_driver.get to
   powernv_cpufreq_get(). [Authored by ego@linux.vnet.ibm.com]

[Change log updated by ego@linux.vnet.ibm.com]
Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Earlier commit:
	commit 652ed95d
	Author: Viresh Kumar <viresh.kumar@linaro.org>
	Date:   Thu Jan 9 20:38:43 2014 +0530

	    cpufreq: introduce cpufreq_generic_get() routine

did some changes to driver and by mistake made cpuclk as a 'static' local
variable, which wasn't actually required. Fix it.

Fixes: 652ed95d (cpufreq: introduce cpufreq_generic_get() routine)
Reported-by: Alexandre Oliva <lxoliva@fsfla.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: 3.14+ <stable@vger.kernel.org> # 3.14+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Earlier commit:
	commit 652ed95d
	Author: Viresh Kumar <viresh.kumar@linaro.org>
	Date:   Thu Jan 9 20:38:43 2014 +0530

	    cpufreq: introduce cpufreq_generic_get() routine

did some changes to driver and by mistake made cpuclk as a 'static' local
variable, which wasn't actually required. Fix it.

Fixes: 652ed95d (cpufreq: introduce cpufreq_generic_get() routine)
Reported-by: Alexandre Oliva <lxoliva@fsfla.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 3.14+ <stable@vger.kernel.org> # 3.14+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Need use 'clk' instead of 'mclk', which is the original removed local
variable.

The related original commit:

  "652ed95d cpufreq: introduce cpufreq_generic_get() routine"

The related error with allmodconfig for unicore32:

    CC      drivers/cpufreq/unicore2-cpufreq.o
  drivers/cpufreq/unicore2-cpufreq.c: In function ‘ucv2_target’:
  drivers/cpufreq/unicore2-cpufreq.c:48: error: ‘struct cpufreq_policy’ has no member named ‘mclk’
  make[2]: *** [drivers/cpufreq/unicore2-cpufreq.o] Error 1
  make[1]: *** [drivers/cpufreq] Error 2
  make: *** [drivers] Error 2

Fixes: 652ed95d (cpufreq: introduce cpufreq_generic_get() routine)
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 3.14+ <stable@vger.kernel.org> # 3.14+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The current exynos cpufreq drivers are not multiplatform compliant
and give build errors as they refer to header files from machine
directory. Work to migrate them to generic cpufreq framework is
under way. Till such time disable the build on multiplatform so
that other multiplatform ready features get tested.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

There are no references to the dock_device_ids[] table anywhere in
the code and it is not even useful for module autoloading, because
the dock driver can only be built in, so drop it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Like many other Windows 8 laptops the ThinkPad Helix's backlight has a
broken ACPI interface and can only be properly adjusted by using the
video card's native backlight control. This adds the ThinkPad Helix to
the list of laptops affected with this issue so that
video.use_native_backlight is enabled by default.
Signed-off-by: Stephen Chandler Paul <thatslyude@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

A debug statement in acpi_thermal_trips_update() uses a wrong trip
point (tz->trips.critical instead of tz->trips.hot) to get the
temperature value from.  Fix that.
Signed-off-by: Zhihui Zhang <zzhsuny@gmail.com>
[rjw: Subject and changelog]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

If we remove a file that has inline data after mount, our statistics turns to
inaccurate.

cat /sys/kernel/debug/f2fs/status
  - Inline_data Inode: 4294967295

Let's add stat_inc_inline_inode() to stat inline info of the file when lookup.

Change log from v1:
 o stat in f2fs_lookup() instead of in do_read_inode() for excluding wrong stat.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

Before setting the acl, call posix_acl_valid() to check if it is
valid or not.
Signed-off-by: zhangzhen <zhenzhang.zhang@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

Some storage devices show relatively high latencies to complete cache_flush
commands, even though their normal IO speed is prettry much high. In such
the case, it needs to merge cache_flush commands as much as possible to avoid
issuing them redundantly.
So, this patch introduces a mount option, "-o flush_merge", to mitigate such
the overhead.

If this option is enabled by user, F2FS merges the cache_flush commands and then
issues just one cache_flush on behalf of them. Once the single command is
finished, F2FS sends a completion signal to all the pending threads.

Note that, this option can be used under a workload consisting of very intensive
concurrent fsync calls, while the storage handles cache_flush commands slowly.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

Pull NFS client updates from Trond Myklebust:
 "Highlights include:

   - Stable fix for a use after free issue in the NFSv4.1 open code
   - Fix the SUNRPC bi-directional RPC code to account for TCP segmentation
   - Optimise usage of readdirplus when confronted with 'ls -l' situations
   - Soft mount bugfixes
   - NFS over RDMA bugfixes
   - NFSv4 close locking fixes
   - Various NFSv4.x client state management optimisations
   - Rename/unlink code cleanups"

* tag 'nfs-for-3.15-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (28 commits)
  nfs: pass string length to pr_notice message about readdir loops
  NFSv4: Fix a use-after-free problem in open()
  SUNRPC: rpc_restart_call/rpc_restart_call_prepare should clear task->tk_status
  SUNRPC: Don't let rpc_delay() clobber non-timeout errors
  SUNRPC: Ensure call_connect_status() deals correctly with SOFTCONN tasks
  SUNRPC: Ensure call_status() deals correctly with SOFTCONN tasks
  NFSv4: Ensure we respect soft mount timeouts during trunking discovery
  NFSv4: Schedule recovery if nfs40_walk_client_list() is interrupted
  NFS: advertise only supported callback netids
  SUNRPC: remove KERN_INFO from dprintk() call sites
  SUNRPC: Fix large reads on NFS/RDMA
  NFS: Clean up: revert increase in READDIR RPC buffer max size
  SUNRPC: Ensure that call_bind times out correctly
  SUNRPC: Ensure that call_connect times out correctly
  nfs: emit a fsnotify_nameremove call in sillyrename codepath
  nfs: remove synchronous rename code
  nfs: convert nfs_rename to use async_rename infrastructure
  nfs: make nfs_async_rename non-static
  nfs: abstract out code needed to complete a sillyrename
  NFSv4: Clear the open state flags if the new stateid does not match
  ...

Pull module updates from Rusty Russell:
 "Nothing major: the stricter permissions checking for sysfs broke a
  staging driver; fix included.  Greg KH said he'd take the patch but
  hadn't as the merge window opened, so it's included here to avoid
  breaking build"

* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  staging: fix up speakup kobject mode
  Use 'E' instead of 'X' for unsigned module taint flag.
  VERIFY_OCTAL_PERMISSIONS: stricter checking for sysfs perms.
  kallsyms: fix percpu vars on x86-64 with relocation.
  kallsyms: generalize address range checking
  module: LLVMLinux: Remove unused function warning from __param_check macro
  Fix: module signature vs tracepoints: add new TAINT_UNSIGNED_MODULE
  module: remove MODULE_GENERIC_TABLE
  module: allow multiple calls to MODULE_DEVICE_TABLE() per module
  module: use pr_cont

skip dentries that were added before MDS issued FILE_SHARED to
client.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>

Pull arch/tile updates from Chris Metcalf:
 "These fix a few stray build issues seen in linux-next, and also add
  the minimal required support for perf to tilegx"

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  arch/tile: remove unused variable 'devcap'
  tile: Fix vDSO compilation issue with allyesconfig
  perf tools: Allow building for tile
  tile/perf: Support perf_events on tilegx and tilepro
  tile: Enable NMIs on return from handle_nmi() without errors
  tile: Add support for handling PMC hardware
  tile: don't use __get_cpu_var() with structure-typed arguments
  tile: avoid overflow in ns2cycles

Pull device mapper changes from Mike Snitzer:

 - Fix dm-cache corruption caused by discard_block_size > cache_block_size

 - Fix a lock-inversion detected by LOCKDEP in dm-cache

 - Fix a dangling bio bug in the dm-thinp target's process_deferred_bios
   error path

 - Fix corruption due to non-atomic transaction commit which allowed a
   metadata superblock to be written before all other metadata was
   successfully written -- this is common to all targets that use the
   persistent-data library's transaction manager (dm-thinp, dm-cache and
   dm-era).

 - Various small cleanups in the DM core

 - Add the dm-era target which is useful for keeping track of which
   blocks were written within a user defined period of time called an
   'era'.  Use cases include tracking changed blocks for backup
   software, and partially invalidating the contents of a cache to
   restore cache coherency after rolling back a vendor snapshot.

 - Improve the on-disk layout of multithreaded writes to the
   dm-thin-pool by splitting the pool's deferred bio list to be a
   per-thin device list and then sorting that list using an rb_tree.
   The subsequent read throughput of the data written via multiple
   threads improved by ~70%.

 - Simplify the multipath target's handling of queuing IO by pushing
   requests back to the request queue rather than queueing the IO
   internally.

* tag 'dm-3.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (24 commits)
  dm cache: fix a lock-inversion
  dm thin: sort the per thin deferred bios using an rb_tree
  dm thin: use per thin device deferred bio lists
  dm thin: simplify pool_is_congested
  dm thin: fix dangling bio in process_deferred_bios error path
  dm mpath: print more useful warnings in multipath_message()
  dm-mpath: do not activate failed paths
  dm mpath: remove extra nesting in map function
  dm mpath: remove map_io()
  dm mpath: reduce memory pressure when requeuing
  dm mpath: remove process_queued_ios()
  dm mpath: push back requests instead of queueing
  dm table: add dm_table_run_md_queue_async
  dm mpath: do not call pg_init when it is already running
  dm: use RCU_INIT_POINTER instead of rcu_assign_pointer in __unbind
  dm: stop using bi_private
  dm: remove dm_get_mapinfo
  dm: make dm_table_alloc_md_mempools static
  dm: take care to copy the space map roots before locking the superblock
  dm transaction manager: fix corruption due to non-atomic transaction commit
  ...

Pull IOMMU upates from Joerg Roedel:
 "This time a few more updates queued up.

   - Rework VT-d code to support ACPI devices

   - Improvements for memory and PCI hotplug support in the VT-d driver

   - Device-tree support for OMAP IOMMU

   - Convert OMAP IOMMU to use devm_* interfaces

   - Fixed PASID support for AMD IOMMU

   - Other random cleanups and fixes for OMAP, ARM-SMMU and SHMOBILE
     IOMMU

  Most of the changes are in the VT-d driver because some rework was
  necessary for better hotplug and ACPI device support"

* tag 'iommu-updates-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (75 commits)
  iommu/vt-d: Fix error handling in ANDD processing
  iommu/vt-d: returning free pointer in get_domain_for_dev()
  iommu/vt-d: Only call dmar_acpi_dev_scope_init() if DRHD units present
  iommu/vt-d: Check for NULL pointer in dmar_acpi_dev_scope_init()
  iommu/amd: Fix logic to determine and checking max PASID
  iommu/vt-d: Include ACPI devices in iommu=pt
  iommu/vt-d: Finally enable translation for non-PCI devices
  iommu/vt-d: Remove to_pci_dev() in intel_map_page()
  iommu/vt-d: Remove pdev from intel_iommu_attach_device()
  iommu/vt-d: Remove pdev from iommu_no_mapping()
  iommu/vt-d: Make domain_add_dev_info() take struct device
  iommu/vt-d: Make domain_remove_one_dev_info() take struct device
  iommu/vt-d: Rename 'hwdev' variables to 'dev' now that that's the norm
  iommu/vt-d: Remove some pointless to_pci_dev() calls
  iommu/vt-d: Make get_valid_domain_for_dev() take struct device
  iommu/vt-d: Make iommu_should_identity_map() take struct device
  iommu/vt-d: Handle RMRRs for non-PCI devices
  iommu/vt-d: Make get_domain_for_dev() take struct device
  iommu/vt-d: Make domain_context_mapp{ed,ing}() take struct device
  iommu/vt-d: Make device_to_iommu() cope with non-PCI devices
  ...

Pull hwmon updates from Jean Delvare:
 "This includes a number of driver conversions to
  devm_hwmon_device_register_with_groups, a few cleanups, and
  support for the ITE IT8623E"

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  hwmon: (it87) Add support for IT8623E
  hwmon: (it87) Fix IT8603E define name
  hwmon: (lm90) Convert to use hwmon_device_register_with_groups
  hwmon: (lm90) Create all sysfs groups in one call
  hwmon: (lm90) Always use the dev variable in the probe function
  hwmon: (lm90) Create most optional attributes with sysfs_create_group
  hwmon: Avoid initializing the same field twice
  hwmon: (pc87360) Avoid initializing the same field twice
  hwmon: (lm80) Convert to use devm_hwmon_device_register_with_groups
  hwmon: (adm1021) Convert to use devm_hwmon_device_register_with_groups
  hwmon: (lm63) Avoid initializing the same field twice
  hwmon: (lm63) Convert to use devm_hwmon_device_register_with_groups
  hwmon: (lm63) Create all sysfs groups in one call
  hwmon: (lm63) Introduce 'dev' variable to point to client->dev
  hwmon: (lm63) Add additional sysfs group for temp2_type attribute
  hwmon: (f71805f) Fix author's address

Pull clock framework changes from Mike Turquette:
 "The clock framework changes for 3.15 look similar to past pull
  requests.  Mostly clock driver updates, more Device Tree support in
  the form of common functions useful across platforms and a handful of
  features and fixes to the framework core"

* tag 'clk-for-linus-3.15' of git://git.linaro.org/people/mike.turquette/linux: (86 commits)
  clk: shmobile: fix setting paretn clock rate
  clk: shmobile: rcar-gen2: fix lb/sd0/sd1/sdh clock parent to pll1
  clk: Fix minor errors in of_clk_init() function comments
  clk: reverse default clk provider initialization order in of_clk_init()
  clk: sirf: update copyright years to 2014
  clk: mmp: try to use closer one when do round rate
  clk: mmp: fix the wrong calculation formula
  clk: mmp: fix wrong mask when calculate denominator
  clk: st: Adds quadfs clock binding
  clk: st: Adds clockgen-vcc and clockgen-mux clock binding
  clk: st: Adds clockgen clock binding
  clk: st: Adds divmux and prediv clock binding
  clk: st: Support for A9 MUX clocks
  clk: st: Support for ClockGenA9/DDR/GPU
  clk: st: Support for QUADFS inside ClockGenB/C/D/E/F
  clk: st: Support for VCC-mux and MUX clocks
  clk: st: Support for PLLs inside ClockGenA(s)
  clk: st: Support for DIVMUX and PreDiv Clocks
  clk: support hardware-specific debugfs entries
  clk: s2mps11: Use of_get_child_by_name
  ...