- 10 Nov, 2018 40 commits
-
-
Matt Redfearn authored
[ Upstream commit cea8cd49 ] When the immediate encoded in the instruction is accessed, it is sign extended due to being a signed value being assigned to a signed integer. The ISA specifies that this operation is an unsigned operation. The sign extension leads us to incorrectly decode: 801e9c8e: cbf1 sw ra,68(sp) As having an immediate of 1073741809. Since the instruction format does not specify signed/unsigned, and this is currently the only location to use this instuction format, change it to an unsigned immediate. Fixes: bb9bc468 ("MIPS: Calculate microMIPS ra properly when unwinding the stack") Suggested-by:
Paul Burton <paul.burton@imgtec.com> Signed-off-by:
Matt Redfearn <matt.redfearn@imgtec.com> Reviewed-by:
James Hogan <james.hogan@imgtec.com> Cc: Marcin Nowakowski <marcin.nowakowski@imgtec.com> Cc: Miodrag Dinic <miodrag.dinic@imgtec.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/16957/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Raghava Aditya Renukunta authored
[ Upstream commit 934767c5 ] The return status of the adapter check on KERNEL_PANIC is supposed to be the upper 16 bits of the OMR status register. Fixes: c421530b (scsi: aacraid: Reorder Adpater status check) Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by:
Dave Carroll <david.carroll@microsemi.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Paolo Abeni authored
[ Upstream commit 19cdead3 ] On slave list updates, the bonding driver computes its hard_header_len as the maximum of all enslaved devices's hard_header_len. If the slave list is empty, e.g. on last enslaved device removal, ETH_HLEN is used. Since the bonding header_ops are set only when the first enslaved device is attached, the above can lead to header_ops->create() being called with the wrong skb headroom in place. If bond0 is configured on top of ipoib devices, with the following commands: ifup bond0 for slave in $BOND_SLAVES_LIST; do ip link set dev $slave nomaster done ping -c 1 <ip on bond0 subnet> we will obtain a skb_under_panic() with a similar call trace: skb_push+0x3d/0x40 push_pseudo_header+0x17/0x30 [ib_ipoib] ipoib_hard_header+0x4e/0x80 [ib_ipoib] arp_create+0x12f/0x220 arp_send_dst.part.19+0x28/0x50 arp_solicit+0x115/0x290 neigh_probe+0x4d/0x70 __neigh_event_send+0xa7/0x230 neigh_resolve_output+0x12e/0x1c0 ip_finish_output2+0x14b/0x390 ip_finish_output+0x136/0x1e0 ip_output+0x76/0xe0 ip_local_out+0x35/0x40 ip_send_skb+0x19/0x40 ip_push_pending_frames+0x33/0x40 raw_sendmsg+0x7d3/0xb50 inet_sendmsg+0x31/0xb0 sock_sendmsg+0x38/0x50 SYSC_sendto+0x102/0x190 SyS_sendto+0xe/0x10 do_syscall_64+0x67/0x180 entry_SYSCALL64_slow_path+0x25/0x25 This change addresses the issue avoiding updating the bonding device hard_header_len when the slaves list become empty, forbidding to shrink it below the value used by header_ops->create(). The bug is there since commit 54ef3137 ("[PATCH] bonding: Handle large hard_header_len") but the panic can be triggered only since commit fc791b63 ("IB/ipoib: move back IB LL address into the hard header"). Reported-by:
Norbert P <noe@physik.uzh.ch> Fixes: 54ef3137 ("[PATCH] bonding: Handle large hard_header_len") Fixes: fc791b63 ("IB/ipoib: move back IB LL address into the hard header") Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Gustavo A. R. Silva authored
[ Upstream commit 9e578b37 ] platform_get_irq() returns an error code, but the tegra-devfreq driver ignores it and always returns -ENODEV. This is not correct, and prevents -EPROBE_DEFER from being propagated properly. Notice that platform_get_irq() no longer returns 0 on error: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e330b9a6bb35dc7097a4f02cb1ae7b6f96df92af Print and propagate the return value of platform_get_irq on failure. Reviewed-by:
Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by:
Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by:
MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by:
-
Gustavo A. R. Silva authored
[ Upstream commit 27d30400 ] platform_get_irq() returns an error code, but the spdif_in driver ignores it and always returns -EINVAL. This is not correct, and prevents -EPROBE_DEFER from being propagated properly. Notice that platform_get_irq() no longer returns 0 on error: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e330b9a6bb35dc7097a4f02cb1ae7b6f96df92af Print error message and propagate the return value of platform_get_irq on failure. Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Gustavo A. R. Silva authored
[ Upstream commit 9a6b9479 ] platform_get_irq() returns an error code, but the spi-xlp driver ignores it and always returns -EINVAL. This is not correct and, prevents -EPROBE_DEFER from being propagated properly. Notice that platform_get_irq() no longer returns 0 on error: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e330b9a6bb35dc7097a4f02cb1ae7b6f96df92af Print and propagate the return value of platform_get_irq on failure. This issue was detected with the help of Coccinelle. Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Gustavo A. R. Silva authored
[ Upstream commit ba8afe94 ] platform_get_irq() returns an error code, but the spi-bcm63xx driver ignores it and always returns -ENXIO. This is not correct and, prevents -EPROBE_DEFER from being propagated properly. Notice that platform_get_irq() no longer returns 0 on error: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e330b9a6bb35dc7097a4f02cb1ae7b6f96df92af Print and propagate the return value of platform_get_irq on failure. This issue was detected with the help of Coccinelle. Signed-off-by:
-
Matt Redfearn authored
[ Upstream commit 11887ed1 ] Commit 34c2f668 ("MIPS: microMIPS: Add unaligned access support.") added fairly broken support for handling 16bit microMIPS instructions in get_frame_info(). It adjusts the instruction pointer by 16bits in the case of a 16bit sp move instruction, but not any other 16bit instruction. Commit b6c7a324 ("MIPS: Fix get_frame_info() handling of microMIPS function size") goes some way to fixing get_frame_info() to iterate over microMIPS instuctions, but the instruction pointer is still manipulated using a postincrement, and is of union mips_instruction type. Since the union is sized to the largest member (a word), but microMIPS instructions are a mix of halfword and word sizes, the function does not always iterate correctly, ending up misaligned with the instruction stream and interpreting it incorrectly. Since the instruction modifying the stack pointer is usually the first in the function, that one is usually handled correctly. But the instruction which saves the return address to the sp is some variable number of instructions into the frame and is frequently missed due to not being on a word boundary, leading to incomplete walking of the stack. Fix this by incrementing the instruction pointer based on the size of the previously decoded instruction (& remove the hack introduced by commit 34c2f668 ("MIPS: microMIPS: Add unaligned access support.") which adjusts the instruction pointer in the case of a 16bit sp move instruction, but not any other). Fixes: 34c2f668 ("MIPS: microMIPS: Add unaligned access support.") Signed-off-by:
-
Gustavo A. R. Silva authored
[ Upstream commit 378da4a6 ] platform_get_irq() returns an error code, but the spi-bcm63xx-hsspi driver ignores it and always returns -ENXIO. This is not correct and, prevents -EPROBE_DEFER from being propagated properly. Notice that platform_get_irq() no longer returns 0 on error: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e330b9a6bb35dc7097a4f02cb1ae7b6f96df92af Print and propagate the return value of platform_get_irq on failure. This issue was detected with the help of Coccinelle. Signed-off-by:
-
Gustavo A. R. Silva authored
[ Upstream commit 0ae99ecb ] platform_get_irq() returns an error code, but the dwc3-omap driver ignores it and always returns -EINVAL. This is not correct and, prevents -EPROBE_DEFER from being propagated properly. Notice that platform_get_irq() no longer returns 0 on error: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e330b9a6bb35dc7097a4f02cb1ae7b6f96df92af Print and propagate the return value of platform_get_irq on failure. This issue was detected with the help of Coccinelle. Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Gustavo A. R. Silva authored
[ Upstream commit 99dbff20 ] platform_get_irq() returns an error code, but the ehci-omap driver ignores it and always returns -ENODEV. This is not correct and, prevents -EPROBE_DEFER from being propagated properly. Also, notice that platform_get_irq() no longer returns 0 on error: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e330b9a6bb35dc7097a4f02cb1ae7b6f96df92af Print and propagate the return value of platform_get_irq on failure. This issue was detected with the help of Coccinelle. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Gustavo A. R. Silva authored
[ Upstream commit 46edf52d ] platform_get_irq() returns an error code, but the imx21-hcd driver ignores it and always returns -ENXIO. This is not correct, and prevents -EPROBE_DEFER from being propagated properly. Notice that platform_get_irq() no longer returns 0 on error: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e330b9a6bb35dc7097a4f02cb1ae7b6f96df92af Print error message and propagate the return value of platform_get_irq on failure. This issue was detected with the help of Coccinelle. Signed-off-by:
-
Gustavo A. R. Silva authored
[ Upstream commit ca1f3ae3 ] platform_get_irq() returns an error code, but the gpio-msic driver ignores it and always returns -EINVAL. This is not correct, and prevents -EPROBE_DEFER from being propagated properly. Notice that platform_get_irq() no longer returns 0 on error: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e330b9a6bb35dc7097a4f02cb1ae7b6f96df92af Print and propagate the return value of platform_get_irq on failure. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
David S. Miller authored
[ Upstream commit 0ede1c40 ] Mikael Pettersson reported that some test programs in the strace-4.18 testsuite cause an OOPS. After some debugging it turns out that garbage values are returned when an exception occurs, causing the fixup memset() to be run with bogus arguments. The problem is that two of the exception handler stubs write the successfully copied length into the wrong register. Fixes: ee841d0a ("sparc64: Convert U3copy_{from,to}_user to accurate exception reporting.") Reported-by:
Mikael Pettersson <mikpelinux@gmail.com> Tested-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Gustavo A. R. Silva authored
[ Upstream commit 7b2c63de ] platform_get_irq() returns an error code, but the host1x driver ignores it and always returns -ENXIO. This is not correct and, prevents -EPROBE_DEFER from being propagated properly. Notice that platform_get_irq() no longer returns 0 on error: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e330b9a6bb35dc7097a4f02cb1ae7b6f96df92af Print and propagate the return value of platform_get_irq on failure. This issue was detected with the help of Coccinelle. Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Mike Kravetz authored
[ Upstream commit 1e953d84 ] Commit af1b1a9b ("sparc64 mm: Fix base TSB sizing when hugetlb pages are used") addressed the difference between hugetlb and THP pages when computing TSB sizes. The following additional issues were also discovered while working with the code. In order to save memory, THP makes use of a huge zero page. This huge zero page does not count against a task's RSS, but it does consume TSB entries. This is similar to hugetlb pages. Therefore, count huge zero page entries in hugetlb_pte_count. Accounting of THP pages is done in the routine set_pmd_at(). Unfortunately, this does not catch the case where a THP page is split. To handle this case, decrement the count in pmdp_invalidate(). pmdp_invalidate is only called when splitting a THP. However, 'sanity checks' are added in case it is ever called for other purposes. A more general issue exists with HPAGE_SIZE accounting. hugetlb_pte_count tracks the number of HPAGE_SIZE (8M) pages. This value is used to size the TSB for HPAGE_SIZE pages. However, each HPAGE_SIZE page consists of two REAL_HPAGE_SIZE (4M) pages. The TSB contains an entry for each REAL_HPAGE_SIZE page. Therefore, the number of REAL_HPAGE_SIZE pages should be used to size the huge page TSB. A new compile time constant REAL_HPAGE_PER_HPAGE is used to multiply hugetlb_pte_count before sizing the TSB. Changes from V1 - Fixed build issue if hugetlb or THP not configured Signed-off-by:
Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by:
-
Gustavo A. R. Silva authored
[ Upstream commit 7588f1ec ] platform_get_irq() returns an error code, but the pxa3xx_gcu driver ignores it and always returns -ENODEV. This is not correct and, prevents -EPROBE_DEFER from being propagated properly. Also, notice that platform_get_irq() no longer returns 0 on error: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e330b9a6bb35dc7097a4f02cb1ae7b6f96df92af Print and propagate the return value of platform_get_irq on failure. This issue was detected with the help of Coccinelle. Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
-
Gustavo A. R. Silva authored
[ Upstream commit ec085c5a ] platform_get_irq() returns an error code, but the sprd_serial driver ignores it and always returns -ENODEV. This is not correct and, prevents -EPROBE_DEFER from being propagated properly. Also, notice that platform_get_irq() no longer returns 0 on error: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e330b9a6bb35dc7097a4f02cb1ae7b6f96df92af Print and propagate the return value of platform_get_irq on failure. This issue was detected with the help of Coccinelle. Signed-off-by:
-
Guillaume Nault authored
[ Upstream commit a3c18422 ] Socket must be held while under the protection of the l2tp lock; there is no guarantee that sk remains valid after the read_unlock_bh() call. Same issue for l2tp_ip and l2tp_ip6. Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
-
Peter S. Housel authored
[ Upstream commit 5ea59db8 ] An earlier change to this function (3bdae810) fixed a leak in the case of an unsuccessful call to brcmf_sdiod_buffrw(). However, the glom_skb buffer, used for emulating a scattering read, is never used or referenced after its contents are copied into the destination buffers, and therefore always needs to be freed by the end of the function. Fixes: 3bdae810 ("brcmfmac: Fix glob_skb leak in brcmf_sdiod_recv_chain") Fixes: a413e39a ("brcmfmac: fix brcmf_sdcard_recv_chain() for host without sg support") Cc: stable@vger.kernel.org # 4.9.x- Signed-off-by:
Peter S. Housel <housel@acm.org> Signed-off-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Alexander Duyck authored
[ Upstream commit c3483384 ] This patch should fix the issues seen with a recent fix to prevent tunnel-in-tunnel frames from being generated with GRO. The fix itself is correct for now as long as we do not add any devices that support NETIF_F_GSO_GRE_CSUM. When such a device is added it could have the potential to mess things up due to the fact that the outer transport header points to the outer UDP header and not the GRE header as would be expected. Fixes: fac8e0f5 ("tunnels: Don't apply GRO to multiple layers of encapsulation.") Signed-off-by:
Alexander Duyck <aduyck@mirantis.com> Signed-off-by:
-
Nicolas Dichtel authored
[ Upstream commit 7f92083e ] This is the same fix than commit a5d0dc81 ("vti: flush x-netns xfrm cache when vti interface is removed") This patch fixes a refcnt problem when a x-netns vti6 interface is removed: unregister_netdevice: waiting for vti6_test to become free. Usage count = 1 Here is a script to reproduce the problem: ip link set dev ntfp2 up ip addr add dev ntfp2 2001::1/64 ip link add vti6_test type vti6 local 2001::1 remote 2001::2 key 1 ip netns add secure ip link set vti6_test netns secure ip netns exec secure ip link set vti6_test up ip netns exec secure ip link s lo up ip netns exec secure ip addr add dev vti6_test 2003::1/64 ip -6 xfrm policy add dir out tmpl src 2001::1 dst 2001::2 proto esp \ mode tunnel mark 1 ip -6 xfrm policy add dir in tmpl src 2001::2 dst 2001::1 proto esp \ mode tunnel mark 1 ip xfrm state add src 2001::1 dst 2001::2 proto esp spi 1 mode tunnel \ enc des3_ede 0x112233445566778811223344556677881122334455667788 mark 1 ip xfrm state add src 2001::2 dst 2001::1 proto esp spi 1 mode tunnel \ enc des3_ede 0x112233445566778811223344556677881122334455667788 mark 1 ip netns exec secure ping6 -c 4 2003::2 ip netns del secure CC: Lance Richardson <lrichard@redhat.com> Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by:
Lance Richardson <lrichard@redhat.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit 9f8a7658 ] When a user timer instance is continued without the explicit start beforehand, the system gets eventually zero-division error like: divide error: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN CPU: 1 PID: 27320 Comm: syz-executor Not tainted 4.8.0-rc3-next-20160825+ #8 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff88003c9b2280 task.stack: ffff880027280000 RIP: 0010:[<ffffffff858e1a6c>] [< inline >] ktime_divns include/linux/ktime.h:195 RIP: 0010:[<ffffffff858e1a6c>] [<ffffffff858e1a6c>] snd_hrtimer_callback+0x1bc/0x3c0 sound/core/hrtimer.c:62 Call Trace: <IRQ> [< inline >] __run_hrtimer kernel/time/hrtimer.c:1238 [<ffffffff81504335>] __hrtimer_run_queues+0x325/0xe70 kernel/time/hrtimer.c:1302 [<ffffffff81506ceb>] hrtimer_interrupt+0x18b/0x420 kernel/time/hrtimer.c:1336 [<ffffffff8126d8df>] local_apic_timer_interrupt+0x6f/0xe0 arch/x86/kernel/apic/apic.c:933 [<ffffffff86e13056>] smp_apic_timer_interrupt+0x76/0xa0 arch/x86/kernel/apic/apic.c:957 [<ffffffff86e1210c>] apic_timer_interrupt+0x8c/0xa0 arch/x86/entry/entry_64.S:487 <EOI> ..... Although a similar issue was spotted and a fix patch was merged in commit [6b760bb2: ALSA: timer: fix division by zero after SNDRV_TIMER_IOCTL_CONTINUE], it seems covering only a part of iceberg. In this patch, we fix the issue a bit more drastically. Basically the continue of an uninitialized timer is supposed to be a fresh start, so we do it for user timers. For the direct snd_timer_continue() call, there is no way to pass the initial tick value, so we kick out for the uninitialized case. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Mark Rustad authored
[ Upstream commit 3ca2b250 ] The X550EM_x revision check needs to check a value, not just a bit. Use a mask and check the value. Also remove the redundant check inside the ixgbe_enter_lplu_t_x550em, because it can only be called when both the mac type and revision check pass. Signed-off-by:
Mark Rustad <mark.d.rustad@intel.com> Tested-by:
Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Emil Tantilov authored
[ Upstream commit e9ee3238 ] X550 allows for up to 64 RSS queues, but the driver can have max of 63 (-1 MSIX vector for link). On systems with >= 64 CPUs the driver will set the redirection table for all 64 queues which will result in packets being dropped. Signed-off-by:
Emil Tantilov <emil.s.tantilov@intel.com> Tested-by:
-
Tariq Toukan authored
[ Upstream commit 85082dba ] Upon changing num_channels, reset the RSS indirection table to match the new value. Fixes: 2d75b2bc ('net/mlx5e: Add ethtool RSS configuration options') Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Tariq Toukan authored
[ Upstream commit ab0394fe ] Ethtool LRO enable/disable is broken, as of today we only modify TCP TIRs in order to apply the requested configuration. Hardware requires that all TIRs pointing to the same RQ should share the same LRO configuration. For that all other TIRs' LRO fields must be modified as well. Fixes: 5c50368f ('net/mlx5e: Light-weight netdev open/stop') Signed-off-by:
-
William Dauchy authored
[ Upstream commit d0f71aff ] This is the same patch as for ixgbe but applied differently according to busy polling. See commit 5d6002b7 ("ixgbe: Fix handling of NAPI budget when multiple queues are enabled per vector") Signed-off-by:
William Dauchy <william@gandi.net> Tested-by:
-
Ashish Samant authored
[ Upstream commit 61c12b49 ] Commit 8fba54ae ("fuse: direct-io: don't dirty ITER_BVEC pages") fixes the ITER_BVEC page deadlock for direct io in fuse by checking in fuse_direct_io(), whether the page is a bvec page or not, before locking it. However, this check is missed when the "async_dio" mount option is enabled. In this case, set_page_dirty_lock() is called from the req->end callback in request_end(), when the fuse thread is returning from userspace to respond to the read request. This will cause the same deadlock because the bvec condition is not checked in this path. Here is the stack of the deadlocked thread, while returning from userspace: [13706.656686] INFO: task glusterfs:3006 blocked for more than 120 seconds. [13706.657808] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [13706.658788] glusterfs D ffffffff816c80f0 0 3006 1 0x00000080 [13706.658797] ffff8800d6713a58 0000000000000086 ffff8800d9ad7000 ffff8800d9ad5400 [13706.658799] ffff88011ffd5cc0 ffff8800d6710008 ffff88011fd176c0 7fffffffffffffff [13706.658801] 0000000000000002 ffffffff816c80f0 ffff8800d6713a78 ffffffff816c790e [13706.658803] Call Trace: [13706.658809] [<ffffffff816c80f0>] ? bit_wait_io_timeout+0x80/0x80 [13706.658811] [<ffffffff816c790e>] schedule+0x3e/0x90 [13706.658813] [<ffffffff816ca7e5>] schedule_timeout+0x1b5/0x210 [13706.658816] [<ffffffff81073ffb>] ? gup_pud_range+0x1db/0x1f0 [13706.658817] [<ffffffff810668fe>] ? kvm_clock_read+0x1e/0x20 [13706.658819] [<ffffffff81066909>] ? kvm_clock_get_cycles+0x9/0x10 [13706.658822] [<ffffffff810f5792>] ? ktime_get+0x52/0xc0 [13706.658824] [<ffffffff816c6f04>] io_schedule_timeout+0xa4/0x110 [13706.658826] [<ffffffff816c8126>] bit_wait_io+0x36/0x50 [13706.658828] [<ffffffff816c7d06>] __wait_on_bit_lock+0x76/0xb0 [13706.658831] [<ffffffffa0545636>] ? lock_request+0x46/0x70 [fuse] [13706.658834] [<ffffffff8118800a>] __lock_page+0xaa/0xb0 [13706.658836] [<ffffffff810c8500>] ? wake_atomic_t_function+0x40/0x40 [13706.658838] [<ffffffff81194d08>] set_page_dirty_lock+0x58/0x60 [13706.658841] [<ffffffffa054d968>] fuse_release_user_pages+0x58/0x70 [fuse] [13706.658844] [<ffffffffa0551430>] ? fuse_aio_complete+0x190/0x190 [fuse] [13706.658847] [<ffffffffa0551459>] fuse_aio_complete_req+0x29/0x90 [fuse] [13706.658849] [<ffffffffa05471e9>] request_end+0xd9/0x190 [fuse] [13706.658852] [<ffffffffa0549126>] fuse_dev_do_write+0x336/0x490 [fuse] [13706.658854] [<ffffffffa054963e>] fuse_dev_write+0x6e/0xa0 [fuse] [13706.658857] [<ffffffff812a9ef3>] ? security_file_permission+0x23/0x90 [13706.658859] [<ffffffff81205300>] do_iter_readv_writev+0x60/0x90 [13706.658862] [<ffffffffa05495d0>] ? fuse_dev_splice_write+0x350/0x350 [fuse] [13706.658863] [<ffffffff812062a1>] do_readv_writev+0x171/0x1f0 [13706.658866] [<ffffffff810b3d00>] ? try_to_wake_up+0x210/0x210 [13706.658868] [<ffffffff81206361>] vfs_writev+0x41/0x50 [13706.658870] [<ffffffff81206496>] SyS_writev+0x56/0xf0 [13706.658872] [<ffffffff810257a1>] ? syscall_trace_leave+0xf1/0x160 [13706.658874] [<ffffffff816cbb2e>] system_call_fastpath+0x12/0x71 Fix this by making should_dirty a fuse_io_priv parameter that can be checked in fuse_aio_complete_req(). Reported-by:
Tiger Yang <tiger.yang@oracle.com> Signed-off-by:
Ashish Samant <ashish.samant@oracle.com> Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
-
Pavel Roskin authored
[ Upstream commit 48137663 ] This is similar to an earlier commit 52dfcc5c ("drm/nouveau: fix for disabled fbdev emulation"), but protects all occurrences of helper.fbdev in the source. I see oops in nouveau_fbcon_accel_save_disable() called from nouveau_fbcon_set_suspend_work() on Linux 3.13 when CONFIG_DRM_FBDEV_EMULATION option is disabled. Signed-off-by:
Pavel Roskin <plroskin@gmail.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit 1aacde3d ] Jann Horn reported following analysis that could potentially result in a very hard to trigger (if not impossible) UAF race, to quote his event timeline: - Set up a process with threads T1, T2 and T3 - Let T1 set up a socket filter F1 that invokes another filter F2 through a BPF map [tail call] - Let T1 trigger the socket filter via a unix domain socket write, don't wait for completion - Let T2 call PERF_EVENT_IOC_SET_BPF with F2, don't wait for completion - Now T2 should be behind bpf_prog_get(), but before bpf_prog_put() - Let T3 close the file descriptor for F2, dropping the reference count of F2 to 2 - At this point, T1 should have looked up F2 from the map, but not finished executing it - Let T3 remove F2 from the BPF map, dropping the reference count of F2 to 1 - Now T2 should call bpf_prog_put() (wrong BPF program type), dropping the reference count of F2 to 0 and scheduling bpf_prog_free_deferred() via schedule_work() - At this point, the BPF program could be freed - BPF execution is still running in a freed BPF program While at PERF_EVENT_IOC_SET_BPF time it's only guaranteed that the perf event fd we're doing the syscall on doesn't disappear from underneath us for whole syscall time, it may not be the case for the bpf fd used as an argument only after we did the put. It needs to be a valid fd pointing to a BPF program at the time of the call to make the bpf_prog_get() and while T2 gets preempted, F2 must have dropped reference to 1 on the other CPU. The fput() from the close() in T3 should also add additionally delay to the reference drop via exit_task_work() when bpf_prog_release() gets called as well as scheduling bpf_prog_free_deferred(). That said, it makes nevertheless sense to move the BPF prog destruction generally after RCU grace period to guarantee that such scenario above, but also others as recently fixed in ceb56070 ("bpf, perf: delay release of BPF prog after grace period") with regards to tail calls won't happen. Integrating bpf_prog_free_deferred() directly into the RCU callback is not allowed since the invocation might happen from either softirq or process context, so we're not permitted to block. Reviewing all bpf_prog_put() invocations from eBPF side (note, cBPF -> eBPF progs don't use this for their destruction) with call_rcu() look good to me. Since we don't know whether at the time of attaching the program, we're already part of a tail call map, we need to use RCU variant. However, due to this, there won't be severely more stress on the RCU callback queue: situations with above bpf_prog_get() and bpf_prog_put() combo in practice normally won't lead to releases, but even if they would, enough effort/ cycles have to be put into loading a BPF program into the kernel already. Reported-by:
Jann Horn <jannh@google.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Alan Stern authored
[ Upstream commit a4fd4a72 ] Ever since commit a621bac3 ("scsi_lib: correctly retry failed zero length REQ_TYPE_FS commands"), people have been getting bogus error messages for USB disk drives using ATA pass-thru. For example: [ 1344.880193] sd 6:0:0:0: [sdb] Attached SCSI disk [ 1345.069152] sd 6:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE [ 1345.069159] sd 6:0:0:0: [sdb] tag#0 Sense Key : Hardware Error [current] [descriptor] [ 1345.069162] sd 6:0:0:0: [sdb] tag#0 Add. Sense: No additional sense information [ 1345.069168] sd 6:0:0:0: [sdb] tag#0 CDB: ATA command pass through(16) 85 06 20 00 00 00 00 00 00 00 00 00 00 00 e5 00 [ 1345.172252] sd 6:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE [ 1345.172258] sd 6:0:0:0: [sdb] tag#0 Sense Key : Hardware Error [current] [descriptor] [ 1345.172261] sd 6:0:0:0: [sdb] tag#0 Add. Sense: No additional sense information [ 1345.172266] sd 6:0:0:0: [sdb] tag#0 CDB: ATA command pass through(12)/Blank a1 06 20 da 00 00 4f c2 00 b0 00 00 These messages can be quite annoying, because programs like udisks2 provoke them every 10 minutes or so. Other programs can also have this effect, such as those in smartmontools. I don't fully understand how that commit induced the SCSI core to log these error messages, but the underlying cause for them is code added to usb-storage by commit f1a0743b ("USB: storage: When a device returns no sense data, call it a Hardware Error"). At the time it was necessary to do this, in order to prevent an infinite retry loop with some not-so-great mass storage devices. However, the ATA pass-thru protocol uses SCSI sense data to return command status values, and some devices always report Check Condition status for ATA pass-thru commands to ensure that the host retrieves the sense data, even if the command succeeded. This violates the USB mass-storage protocol (Check Condition status is supposed to mean the command failed), but we can't help that. This patch attempts to mitigate the problem of these bogus error reports by changing usb-storage. The HARDWARE ERROR sense key will be inserted only for commands that aren't ATA pass-thru. Thanks to Ewan Milne for pointing out that this mechanism was present in usb-storage. 8 years after writing it, I had completely forgotten its existence. Signed-off-by:
Kris Lindgren <kris.lindgren@gmail.com> Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1351305 CC: Ewan D. Milne <emilne@redhat.com> CC: <stable@vger.kernel.org> Signed-off-by:
-
WANG Cong authored
[ Upstream commit d7f4f332 ] Fixes: 2ccccf5f ("net_sched: update hierarchical backlog too") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Sowmini Varadhan authored
[ Upstream commit 9a78d4fc ] The function pcibios_add_device() added by commit d0c31e02 ("sparc/PCI: Fix for panic while enabling SR-IOV") initializes the dev_archdata by doing a memcpy from the PF. This has the problem that it erroneously copies the OF device without explicitly refcounting it. As David Miller pointed out: "Generally speaking we don't really support hot-plug for OF probed devices, but if we did all of the device tree pointers have to be refcounted properly." To fix this error, and also avoid code duplication, this patch creates a new helper function, pci_init_dev_archdata(), that initializes the fields in dev_archdata, and can be invoked by callers after they have taken the needed refcounts Signed-off-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Tested-by:
Babu Moger <babu.moger@oracle.com> Reviewed-by:
Khalid Aziz <khalid.aziz@oracle.com> Signed-off-by:
-
Ewan D. Milne authored
[ Upstream commit f9279c96 ] The addition of the STARGET_REMOVE state had the side effect of introducing a race condition that can cause a crash. scsi_target_reap_ref_release() checks the starget->state to see if it still in STARGET_CREATED, and if so, skips calling transport_remove_device() and device_del(), because the starget->state is only set to STARGET_RUNNING after scsi_target_add() has called device_add() and transport_add_device(). However, if an rport loss occurs while a target is being scanned, it can happen that scsi_remove_target() will be called while the starget is still in the STARGET_CREATED state. In this case, the starget->state will be set to STARGET_REMOVE, and as a result, scsi_target_reap_ref_release() will take the wrong path. The end result is a panic: [ 1255.356653] Oops: 0000 [#1] SMP [ 1255.360154] Modules linked in: x86_pkg_temp_thermal kvm_intel kvm irqbypass crc32c_intel ghash_clmulni_i [ 1255.393234] CPU: 5 PID: 149 Comm: kworker/u96:4 Tainted: G W 4.11.0+ #8 [ 1255.401879] Hardware name: Dell Inc. PowerEdge R320/08VT7V, BIOS 2.0.22 11/19/2013 [ 1255.410327] Workqueue: scsi_wq_6 fc_scsi_scan_rport [scsi_transport_fc] [ 1255.417720] task: ffff88060ca8c8c0 task.stack: ffffc900048a8000 [ 1255.424331] RIP: 0010:kernfs_find_ns+0x13/0xc0 [ 1255.429287] RSP: 0018:ffffc900048abbf0 EFLAGS: 00010246 [ 1255.435123] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 1255.443083] RDX: 0000000000000000 RSI: ffffffff8188d659 RDI: 0000000000000000 [ 1255.451043] RBP: ffffc900048abc10 R08: 0000000000000000 R09: 0000012433fe0025 [ 1255.459005] R10: 0000000025e5a4b5 R11: 0000000025e5a4b5 R12: ffffffff8188d659 [ 1255.466972] R13: 0000000000000000 R14: ffff8805f55e5088 R15: 0000000000000000 [ 1255.474931] FS: 0000000000000000(0000) GS:ffff880616b40000(0000) knlGS:0000000000000000 [ 1255.483959] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1255.490370] CR2: 0000000000000068 CR3: 0000000001c09000 CR4: 00000000000406e0 [ 1255.498332] Call Trace: [ 1255.501058] kernfs_find_and_get_ns+0x31/0x60 [ 1255.505916] sysfs_unmerge_group+0x1d/0x60 [ 1255.510498] dpm_sysfs_remove+0x22/0x60 [ 1255.514783] device_del+0xf4/0x2e0 [ 1255.518577] ? device_remove_file+0x19/0x20 [ 1255.523241] attribute_container_class_device_del+0x1a/0x20 [ 1255.529457] transport_remove_classdev+0x4e/0x60 [ 1255.534607] ? transport_add_class_device+0x40/0x40 [ 1255.540046] attribute_container_device_trigger+0xb0/0xc0 [ 1255.546069] transport_remove_device+0x15/0x20 [ 1255.551025] scsi_target_reap_ref_release+0x25/0x40 [ 1255.556467] scsi_target_reap+0x2e/0x40 [ 1255.560744] __scsi_scan_target+0xaa/0x5b0 [ 1255.565312] scsi_scan_target+0xec/0x100 [ 1255.569689] fc_scsi_scan_rport+0xb1/0xc0 [scsi_transport_fc] [ 1255.576099] process_one_work+0x14b/0x390 [ 1255.580569] worker_thread+0x4b/0x390 [ 1255.584651] kthread+0x109/0x140 [ 1255.588251] ? rescuer_thread+0x330/0x330 [ 1255.592730] ? kthread_park+0x60/0x60 [ 1255.596815] ret_from_fork+0x29/0x40 [ 1255.600801] Code: 24 08 48 83 42 40 01 5b 41 5c 5d c3 66 66 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 [ 1255.621876] RIP: kernfs_find_ns+0x13/0xc0 RSP: ffffc900048abbf0 [ 1255.628479] CR2: 0000000000000068 [ 1255.632756] ---[ end trace 34a69ba0477d036f ]--- Fix this by adding another scsi_target state STARGET_CREATED_REMOVE to distinguish this case. Fixes: f05795d3 ("scsi: Add intermediate STARGET_REMOVE state to scsi_target_state") Reported-by:
David Jeffery <djeffery@redhat.com> Signed-off-by:
Ewan D. Milne <emilne@redhat.com> Cc: <stable@vger.kernel.org> Reviewed-by:
Laurence Oberman <loberman@redhat.com> Tested-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
-
Jonathan Basseri authored
[ Upstream commit 2b06cdf3 ] If a socket has a valid dst cache, then xfrm_lookup_route will get skipped. However, the cache is not invalidated when applying policy to a socket (i.e. IPV6_XFRM_POLICY). The result is that new policies are sometimes ignored on those sockets. (Note: This was broken for IPv4 and IPv6 at different times.) This can be demonstrated like so, 1. Create UDP socket. 2. connect() the socket. 3. Apply an outbound XFRM policy to the socket. (setsockopt) 4. send() data on the socket. Packets will continue to be sent in the clear instead of matching an xfrm or returning a no-match error (EAGAIN). This affects calls to send() and not sendto(). Invalidating the sk_dst_cache is necessary to correctly apply xfrm policies. Since we do this in xfrm_user_policy(), the sk_lock was already acquired in either do_ip_setsockopt() or do_ipv6_setsockopt(), and we may call __sk_dst_reset(). Performance impact should be negligible, since this code is only called when changing xfrm policy, and only affects the socket in question. Fixes: 00bc0ef5 ("ipv6: Skip XFRM lookup if dst_entry in socket cache is valid") Tested: https://android-review.googlesource.com/517555 Tested: https://android-review.googlesource.com/418659Signed-off-by:
Jonathan Basseri <misterikkit@google.com> Signed-off-by:
-
Catalin Marinas authored
[ Upstream commit 6d332747 ] In a system with DBM (dirty bit management) capable agents there is a possible race between a CPU executing ptep_set_access_flags() (maybe non-DBM capable) and a hardware update of the dirty state (clearing of PTE_RDONLY). The scenario: a) the pte is writable (PTE_WRITE set), clean (PTE_RDONLY set) and old (PTE_AF clear) b) ptep_set_access_flags() is called as a result of a read access and it needs to set the pte to writable, clean and young (PTE_AF set) c) a DBM-capable agent, as a result of a different write access, is marking the entry as young (setting PTE_AF) and dirty (clearing PTE_RDONLY) The current ptep_set_access_flags() implementation would set the PTE_RDONLY bit in the resulting value overriding the DBM update and losing the dirty state. This patch fixes such race by setting PTE_RDONLY to the most permissive (lowest value) of the current entry and the new one. Fixes: 66dbd6e6 ("arm64: Implement ptep_set_access_flags() for hardware AF/DBM") Cc: Will Deacon <will.deacon@arm.com> Acked-by:
Mark Rutland <mark.rutland@arm.com> Acked-by:
Steve Capper <steve.capper@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Mark Syms authored
[ Upstream commit 40920c2b ] Commit 1a967d6c ("correctly to anonymous authentication for the NTLM(v2) authentication") introduces a regression in handling errors related to attempting a guest connection to a Windows share which requires authentication. This should result in a permission denied error but actually causes the kernel module to enter a never-ending loop trying to follow a DFS referal which doesn't exist. The base cause of this is the failure now occurs later in the process during tree connect and not at the session setup setup and all errors in tree connect are interpreted as needing to follow the DFS paths which isn't in this case correct. So, check the returned error against EACCES and fail if this is returned error. Feedback from Aurelien: PS> net user guest /activate:no PS> mkdir C:\guestshare PS> icacls C:\guestshare /grant 'Everyone:(OI)(CI)F' PS> new-smbshare -name guestshare -path C:\guestshare -fullaccess Everyone I've tested v3.10, v4.4, master, master+your patch using default options (empty or no user "NU") and user=abc (U). NT_LOGON_FAILURE in session setup: LF This is what you seem to have in 3.10. NT_ACCESS_DENIED in tree connect to the share: AD This is what you get before your infinite loop. | NU U -------------------------------- 3.10 | LF LF 4.4 | LF LF master | AD LF master+patch | AD LF No infinite DFS loop :( All these issues result in mount failing very fast with permission denied. I guess it could be from either the Windows version or the share/folder ACL. A deeper analysis of the packets might reveal more. In any case I did not notice any issues for on a basic DFS setup with the patch so I don't think it introduced any regressions, which is probably all that matters. It still bothers me a little I couldn't hit the bug. I've included kernel output w/ debugging output and network capture of my tests if anyone want to have a look at it. (master+patch = ml-guestfix). Signed-off-by:
Mark Syms <mark.syms@citrix.com> Reviewed-by:
Aurelien Aptel <aaptel@suse.com> Tested-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit 50c7a0ef ] The wm8940 driver is using a regmap cache sync to restore the configuration of the chip when switching from OFF to STANDBY, but does not actually define a register cache which means that the restore is never going to work and we trigger asserts in regmap. Fix this by enabling caching. Based on commit d3030d11 ("ASoC: ak4642: Enable cache usage to fix crashes on resume") by Mark Brown <broonie@kernel.org>. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit dcd2d1f7 ] During system resume: kernel BUG at drivers/base/regmap/regcache.c:347! ... PC is at regcache_sync+0x1c/0x128 LR is at ak4613_resume+0x28/0x34 The ak4613 driver is using a regmap cache sync to restore the configuration of the chip on resume but does not actually define a register cache which means that the resume is never going to work and we trigger asserts in regmap. Fix this by enabling caching. Based on commit d3030d11 ("ASoC: ak4642: Enable cache usage to fix crashes on resume") by Mark Brown <broonie@kernel.org>. Signed-off-by:
-
