The newly introduced HNS_MDIO Kconfig symbol selects 'MDIO', but
that is the wrong symbol as the code used by this driver is
provided by PHYLIB rather than the MDIO driver. Also, there is
no need to make this driver user selectable, because it is already
selected by all drivers that need it.

This changes the Kconfig file to select the correct library, and
to make the option silent.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 5b904d39 ("net: add Hisilicon Network Subsystem MDIO support")
Signed-off-by: David S. Miller <davem@davemloft.net>

On EF10, MC_CMD_VPORT_RECONFIGURE can cause a CODE_MC_REBOOT event
to be sent to a function without incrementing the (adapter-wide)
warm_boot_count.  In this case, the reboot is not detected by the
loop on efx_mcdi_poll_reboot(), so prepare for recovery from an MC
reboot anyway.  When this codepath is run, the MC has always just
rebooted, so this recovery is valid.

The loop on efx_mcdi_poll_reboot() is still required for other MC
reboot cases, so that actions in response to an MC reboot are
performed, such as clearing locally calculated statistics.
Siena NICs are unaffected by this change as the above scenario
does not apply.
Signed-off-by: Shradha Shah <sshah@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Scott Feldman says:

====================
switchdev: push bridge ageing_time attribute down

Push bridge-level attributes down to switchdev drivers.  This patchset
adds the infrastructure and then pushes, as an example, ageing_time attribute
down from bridge to switchdev (rocker) driver.  Add some range-checking
for ageing_time.

RTNETLINK answers: Numerical result out of range

Up until now, switchdev attrs where port-level attrs, so the netdev used in
switchdev_attr_set() would be a switch port or bond of switch ports.  With
bridge-level attrs, the netdev passed to switchdev_attr_set() is the bridge
netdev.  The same recusive algo is used to visit the leaves of the stacked
drivers to set the attr, it's just in this case we start one layer higher in
the stack.  One note is not all ports in the bridge may support setting a
bridge-level attribute, so rather than failing the entire set, we'll skip over
those ports returning -EOPNOTSUPP.

v2->v3: Per Jiri review: push only ageing_time attr down at this time, and
don't pass raw bridge IFLA_BR_* values; rather use new switchdev attr ID for
ageing_time.

v1->v2: rebase w/ net-next
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The FDB cleanup timer will get rescheduled to re-evaluate FDB entries
based on new ageing_time.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use SWITCHDEV_F_SKIP_EOPNOTSUPP to skip over ports in bridge that don't
support setting ageing_time (or setting bridge attrs in general).

If push fails, don't update ageing_time in bridge and return err to user.

If push succeeds, update ageing_time in bridge and run gc_timer now to
recalabrate when to run gc_timer next, based on new ageing_time.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This allows us to recurse over all the ports, skipping over unsupporting
ports.  Without the change, the recursion would stop at first unsupported
port.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Setting the stage to push bridge-level attributes down to port driver so
hardware can be programmed accordingly.  Bridge-level attribute example is
ageing_time.  This is a per-bridge attribute, not a per-bridge-port attr.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The alive parameter of tcp_orphan_retries, indicates
whether the connection is assumed alive or not.
In the function and all places calling it is used as a boolean value.

Therefore this changes the type of alive to bool in the function
definition and all calling locations.

Since tcp_orphan_tries is a tcp_timer.c local function no change in
any other file or header is necessary.
Signed-off-by: Richard Sailer <richard@weltraumpflege.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch enables adding of fdb entries pointing to the bridge device.
This can be used to propagate mac address of vlan interfaces
configured on top of the vlan filtering bridge.

Before:
$bridge fdb add 44:38:39:00:27:9f dev bridge
RTNETLINK answers: Invalid argument

After:
$bridge fdb add 44:38:39:00:27:9f dev bridge
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Before recent TCP listener patches, we were updating listener
sk->sk_rxhash before the cloning of master socket.

children sk_rxhash was therefore correct after the normal 3WHS.

But with lockless listener, we no longer dirty/change listener sk_rxhash
as it would be racy.

We need to correctly update the child sk_rxhash, otherwise first data
packet wont hit correct cpu if RFS is used.

Fixes: 079096f1 ("tcp/dccp: install syn_recv requests into ehash table")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Willem de Bruijn <willemb@google.com>
Cc: Tom Herbert <tom@herbertland.com>
Acked-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Vivien Didelot says:

====================
net: dsa: push switchdev prepare phase in FDB ops

This patchset pushes the switchdev prepare phase for the FDB add and del
operations down to the DSA drivers. Currently only mv88e6xxx is affected.

Since the dump requires a bit of refactoring in the driver, it'll come in a
future patchset.

Changes in v2:
 * forward declare switchdev structs instead of fixing the dsa.h include.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

For consistency with the FDB add operation, propagate the
switchdev_obj_port_fdb structure in the DSA drivers.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now that the prepare phase is pushed down to the DSA drivers, propagate
it to the port_fdb_add function.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Push the prepare phase for FDB operations down to the DSA drivers, with
a new port_fdb_prepare function. Currently only mv88e6xxx is affected.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Jon Ringle <jringle@gridpoint.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

Johan Hedberg says:

====================
pull request: bluetooth-next 2015-10-08

Here's another set of Bluetooth & 802.15.4 patches for the 4.4 kernel.

802.15.4:
 - Many improvements & fixes to the mrf24j40 driver
 - Fixes and cleanups to nl802154, mac802154 & ieee802154 code

Bluetooth:
 - New chipset support in btmrvl driver
 - Fixes & cleanups to btbcm, btmrvl, bpa10x & btintel drivers
 - Support for vendor specific diagnostic data through common API
 - Cleanups to the 6lowpan code
 - New events & message types for monitor channel

Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

we have two processes to do:
P1#: ifconfig eth0 down; which will call bnx2_close, then will
, and set Null to stats_blk
P2#: ifconfig eth0; which will call bnx2_get_stats64, it will
use stats_blk.
In one case:
    --P1#--                   --P2#--
                              stats_blk(no null)
    bnx2_free_mem
    ->bp->stats_blk = NULL
                              GET_64BIT_NET_STATS

then it will cause 'NULL Pointer' Problem.
it is as well with 'ethtool -S ethx'.

Allocate the statistics block at probe time so that this problem is
impossible
Signed-off-by: Wang Weidong <wangweidong1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

selinux needs few changes to accommodate fact that SYNACK messages
can be attached to a request socket, lacking sk_security pointer

(Only syncookies are still attached to a TCP_LISTEN socket)

Adds a new sk_listener() helper, and use it in selinux and sch_fq

Fixes: ca6fb065 ("tcp: attach SYNACK messages to request sockets instead of listener")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported by: kernel test robot <ying.huang@linux.intel.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: Eric Paris <eparis@parisplace.org>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

t4_check_fw_version() can return several error codes (-EINVAL, -EBUSY,
-EAGAIN). The present code sets the adapter state to UNINIT only if its
an EFAULT. In all the error cases set the adapter to uninitialized state.

In t4_check_fw_version() if call to t4_get_fw_version() fails, repeat the
operation a few times before returning failure.
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

eBPF socket filter programs may see junk in 'u32 cb[5]' area,
since it could have been used by protocol layers earlier.

For socket filter programs used in af_packet we need to clean
20 bytes of skb->cb area if it could be used by the program.
For programs attached to TCP/UDP sockets we need to save/restore
these 20 bytes, since it's used by protocol layers.

Remove SK_RUN_FILTER macro, since it's no longer used.

Long term we may move this bpf cb area to per-cpu scratch, but that
requires addition of new 'per-cpu load/store' instructions,
so not suitable as a short term fix.

Fixes: d691f9e8 ("bpf: allow programs to write to certain skb fields")
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Paul Gortmaker says:

====================
make non-modular code explicitly non-modular

[v2: drop m68k patches that Geert converted to modules; add one ARM
 driver patch ; update net-next baseline to today; switch to ARM
 for build testing.]

In a previous merge window, we made changes to allow better
delineation between modular and non-modular code in commit
0fd972a7 ("module: relocate module_init
from init.h to module.h").  This allows us to now ensure module code
looks modular and non-modular code does not accidentally look modular
just to avoid suffering build breakage.

Here we target code that is, by nature of their Makefile and/or
Kconfig settings, only available to be built-in, but implicitly
presenting itself as being possibly modular by way of using modular
headers, macros, and functions.

The goal here is to remove that illusion of modularity from these
files, but in a way that leaves the actual runtime unchanged.
In doing so, we remove code that has never been tested and adds
no value to the tree.  And we continue the process of expecting a
level of consistency between the Kconfig/Makefile of code and the
code in use itself.

Fortuntately the net subsystem has relatively few instances, given
the overall amount of code and drivers it contains.  For comparison
there are over 300 instances tree wide, resulting in a possible net
removal of on the order of 5000 lines of unused code.

Build tested on net-next from today, on ARM, since that is the arch
where the one ethernet driver changed here is available.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The Kconfig currently controlling compilation of this code is:

drivers/net/ethernet/ti/Kconfig:config TI_CPSW_PHY_SEL
drivers/net/ethernet/ti/Kconfig:        bool "TI CPSW Switch Phy sel Support"

...meaning that it currently is not being built as a module by anyone.

Lets remove the couple traces of modularity so that when reading the
driver there is no doubt it is builtin-only.

Since module_platform_driver() uses the same init level priority as
builtin_platform_driver() the init ordering remains unchanged with
this commit.

Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

We also delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Varka Bhadram <varkabhadram@gmail.com>
Cc: netdev@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The Kconfig currently controlling compilation of this code is:

net/sched/Kconfig:menuconfig NET_SCHED
net/sched/Kconfig:      bool "QoS and/or fair queueing"

...meaning that it currently is not being built as a module by anyone.

Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.

Since module_init translates to device_initcall in the non-modular
case, the init ordering remains unchanged with this commit.  We can
change to one of the other priority initcalls (subsys?) at any later
date, if desired.

We also delete the MODULE_LICENSE tag since all that information
is already contained at the top of the file in the comments.

Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The Kconfig currently controlling compilation of this code is:

net/dcb/Kconfig:config DCB
net/dcb/Kconfig:        bool "Data Center Bridging support"

...meaning that it currently is not being built as a module by anyone.

Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.

Since module_init translates to device_initcall in the non-modular
case, the init ordering remains unchanged with this commit.  We can
change to one of the other priority initcalls (subsys?) at any later
date, if desired.

We also delete the MODULE_LICENSE tag etc. since all that information
is (or is now) already contained at the top of the file in the comments.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Cc: Anish Bhatt <anish@chelsio.com>
Cc: John Fastabend <john.r.fastabend@intel.com>
Cc: Shani Michaeli <shanim@mellanox.com>
Cc: netdev@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The Makefile currently controlling compilation of this code lists
it under "obj-y" ...meaning that it currently is not being built as
a module by anyone.

Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.

Since module_init translates to device_initcall in the non-modular
case, the init ordering remains unchanged with this commit.  We can
change to one of the other priority initcalls (subsys?) at any later
date, if desired.

We can't remove module.h since the file uses other module related
stuff even though it is not modular itself.

We move the information from the MODULE_LICENSE tag to the top of the
file, since that information is not captured anywhere else.  The
MODULE_ALIAS_NET_PF_PROTO becomes a no-op in the non modular case, so
it is removed.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Craig Gallek <kraig@google.com>
Cc: netdev@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Yaowei Bai says:

====================
net: small improvement

This patchset makes several functions in net return bool to improve
readability and/or simplicity because these functions only use one
or zero as their return value.

No functional changes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch makes lockdep_rtnl_is_held return bool due to this
particular function only using either one or zero as its return
value.

In another patch lockdep_is_held is also made return bool.

No functional change.
Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch makes bad_mask return bool due to this particular function
only using either one or zero as its return value.

No functional change.
Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch makes inet_ifa_match return bool due to this
particular function only using either one or zero as its return
value.

No functional change.
Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch makes dccp_bad_service_code return bool due to these
particular functions only using either one or zero as their return
value.

dccp_list_has_service is also been made return bool in this patchset.

No functional change.
Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch makes dccp_list_has_service return bool due to this
particular function only using either one or zero as its return
value.

No functional change.
Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch makes can_dropped_invalid_skb return bool due to this
particular function only using either one or zero as its return
value.

No functional change.
Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch makes lockdep_nfnl_is_held return bool to improve
readability due to this particular function only using either
one or zero as its return value.

No functional change.
Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch makes ieee80211_is_* return bool to improve
readability due to these particular functions only using either
one or zero as their return value.

No functional change.
Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch makes lockdep_genl_is_held return bool to improve
readability due to this particular function only using either
one or zero as its return value.

No functional change.
Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Or Gerlitz says:

==============================
Mellanox driver update for net-next

Some small fixes and small enhancements from the team.

Series applies over net-next commit acb4a6bf "tcp: ensure prior synack rtx behavior
with small backlogs".
==============================
Signed-off-by: David S. Miller <davem@davemloft.net>

The 'for' loop when undoing rb-tree insertions and list-adds in the
error flow in add_res_range had errors, fix them.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The procedure mlx4_update_qp leaks mailboxes in its error-flow, fix that.
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Changed the receive control flow in a way that steering
rules are added only when the RSS object is already in RTR/RTS mode.
Some optimization features, which are enabled by the device firmware,
require this condition in order to be effective.
Signed-off-by: Ido Shamay <idos@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use a single threaded work queue for each device in the system instead of
using one thread for any device. This is required so we can concurrently
process system error handling for all the devices that need that.
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>