- 24 Mar, 2007 14 commits
-
-
Patrick Ringl authored
This is just a QA / cosmetic fix .. [ "a modules" => "a module" ] Signed-off-by:Linus Torvalds <torvalds@linux-foundation.org>
-
Michael Krufky authored
After dvb tuner refactoring, the pllbuff has been altered such that the pll address is now stored in buf[0]. Instead of sending buf to set_pll_input, we should send buf+1. Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Ivan Andrewjeski <ivan@fiero-gt.com> Signed-off-by:
-
Thomas Gleixner authored
commit f9690982 removed the check for cpu_khz from sched_clock(), which prevented early access to the TSC by non obvious magic. This is harmless as long as the CPU has a TSC. On TSCless systems this results in an illegal instruction trap. Replace tsc_disabled and tsc_unstable by tsc_enabled, which is only set when the tsc is available and not unstable. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Ralf Baechle authored
Signed-off-by:Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
CC arch/mips/mm/cerr-sb1.o arch/mips/mm/cerr-sb1.c: In function 'sb1_cache_error': arch/mips/mm/cerr-sb1.c:235: warning: format '%010llx' expects type 'long long unsigned int', but argument 2 has type 'uint64_t' arch/mips/mm/cerr-sb1.c: In function 'extract_ic': arch/mips/mm/cerr-sb1.c:385: warning: format '%016llx' expects type 'long long unsigned int', but argument 3 has type 'uint64_t' arch/mips/mm/cerr-sb1.c:385: warning: format '%016llX' expects type 'long long unsigned int', but argument 6 has type 'uint64_t' arch/mips/mm/cerr-sb1.c: In function 'extract_dc': arch/mips/mm/cerr-sb1.c:523: warning: format '%010llx' expects type 'long long unsigned int', but argument 3 has type 'uint64_t' arch/mips/mm/cerr-sb1.c:523: warning: format '%016llX' expects type 'long long unsigned int', but argument 7 has type 'uint64_t' arch/mips/mm/cerr-sb1.c:570: warning: format '%016llX' expects type 'long long unsigned int', but argument 3 has type 'uint64_t' LD arch/mips/mm/built-in.o Signed-off-by: -
Ralf Baechle authored
arch/mips/jazz/jazzdma.c:70: warning: assignment makes integer from pointer without a cast Signed-off-by: -
Ralf Baechle authored
Signed-off-by: -
Ralf Baechle authored
The missing cast did result a warning when calling an 32-bit ARC firmware function that takes 5 arguments where the 5th argument is a pointer from a 64-bit kernel. Signed-off-by: -
Ralf Baechle authored
Signed-off-by: -
Atsushi Nemoto authored
Signed-off-by:
Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by:
-
Ralf Baechle authored
In the the sequence: ei .. mfc0 $x, $status the mfc0 may not see the SR_IE bit set. This was a deliberate bug in the kernel code because we knew this was a safe thing to do on all R2 silicon so far but new silicon is changing this. Signed-off-by: -
Deepak Saxena authored
Signed-off-by:
Manish Lachwani <mlachwani@mvista.com> Signed-off-by:
Deepak Saxena <dsaxena@mvista.com> Signed-off-by:
-
Franck Bui-Huu authored
This patch fixes two places where we used plain 'x - PAGE_OFFSET' to achieve virtual to physical address convertions. This type of convertion is no more allowed since commit 6f284a2c. Reported-by:
Maxime Bizon <mbizon@freebox.fr> Signed-off-by:
Franck Bui-Huu <fbuihuu@gmail.com> [Build fixes for machines that don't use the generic dma-coherence.h] Signed-off-by:
-
Thomas Gleixner authored
Ray Lee reported, that on an UP kernel with "noapic" command line option set, the box locks hard during boot. Adding some debug printks revealed, that the last action on the box before stalling was "Send IPI" - a debug printk which was put into smp_send_timer_broadcast_ipi(). It seems that send_IPI_mask(mask, LOCAL_TIMER_VECTOR) fails when "noapic" is set on the command line on an UP kernel. Aside of that it does not make much sense to trigger an interrupt instead of calling the function directly on the CPU which gets the PIT/HPET interrupt in case of broadcasting. Reported-by:
Ray Lee <ray-lk@madrabbit.org> Signed-off-by:
-
- 23 Mar, 2007 26 commits
-
-
Roland McGrath authored
The segment register slots in struct pt_regs are padded to 32 bits. Some of these are stored with instructions like "pushl %es", which leaves the high 16 bits as they were. So the high bits of these fields in struct pt_regs contain kernel stack garbage. These bits are ignored by everything and never leak to user space, except in core dumps. The user struct pt_regs is always at the base of the thread's kernel stack and so it seems unlikely the information that leaks from here is ever worthwhile so as to be a security concern, but I'm not sure about that. It has been this way for ages; userland consumers of core dumps all mask off these high bits themselves. So it is not urgent. This change masks off the padding bits of the segment register slots in core dumps. ptrace already masks off these high bits, so this makes the values in core dumps consistent with what ptrace would report just before the process died. As I read the processor manuals, the cs and ss values will always be padded with zero bits rather than stack garbage. But unlike "pushl %es", this is not simple to test with a userland program. So I added the two instructions rather than wonder if they are really never necessary. I think that x86_64 does not have this problem (for either 32-bit or 64-bit processes). It only uses "mov" instructions from segment registers, which zero-extend. Signed-off-by:
Roland McGrath <roland@redhat.com> Signed-off-by:
-
Linus Torvalds authored
Needed for any architecture that claims ARCH_APICTIMER_STOPS_ON_C3, not just i386. I'm hoping Thomas will clean this up a bit later.. Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: ieee1394: fix oops on "modprobe -r ohci1394" after network class_device conversion
-
Linus Torvalds authored
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: [netdrvr] ewrk3: correct card detection bug cxgb3 - fix white spaces in drivers/net/Kconfig myri10ge: update driver version to 1.3.0-1.226 myri10ge: fix management of >4kB allocated pages myri10ge: update wcfifo and intr_coal_delay default values myri10ge: Serverworks HT2100 provides aligned PCIe completion mv643xx_eth: add mv643xx_eth_shutdown function SAA9730: Fix large pile of warnings Revert "ucc_geth: returns NETDEV_TX_BUSY when BD ring is full" cxgb3 - T3B2 pcie config space cxgb3 - Fix potential MAC hang cxgb3 - Auto-load FW if mismatch detected cxgb3 - fix ethtool cmd on multiple queues port Fix return code in pci-skeleton.c skge: use per-port phy locking skge: mask irqs when device down skge: deadlock on tx timeout [PATCH] airo: Fix an error path memory leak [PATCH] bcm43xx: MANUALWLAN fixes
-
Andrew Morton authored
A little mistake in 8a2bfdcb is making all transactions synchronous, which reduces ext3 performance to comical levels. Cc: Mingming Cao <cmm@us.ibm.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Guido Guenther authored
This is the rivafb equivalent of 238576e1. It fixes rivafb having a default backlight brightness of 0 (no picture at all) on a PBook 6,1. Signed-off-by:
Guido Guenther <agx@sigxcpu.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Acked-by:
Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
-
Danny Kukawka authored
Adds device ids of two Fujitsu Siemens Tablet PCs to pnp_dev_table Signed-off-by:
Danny Kukawka <dkukawka@suse.de> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
David Howells authored
Fix the /proc/pid/stat representation of executable boundaries. It should show the bounds of the executable, but instead shows the bounds of the loader. Before the patch is applied, the bug can be seen by examining, say, inetd: # ps | grep inetd 610 root 0 S /usr/sbin/inetd -i # cat /proc/610/maps c0bb0000-c0bba788 r-xs 00000000 00:0b 14582157 /lib/ld-uClibc-0.9.28.so c3180000-c31dede4 r-xs 00000000 00:0b 14582179 /lib/libuClibc-0.9.28.so c328c000-c328ea00 rw-p 00008000 00:0b 14582157 /lib/ld-uClibc-0.9.28.so c3290000-c329b6c0 rw-p 00000000 00:00 0 c32a0000-c32c0000 rwxp 00000000 00:00 0 c32d4000-c32d8000 rw-p 00000000 00:00 0 c3394000-c3398000 rw-p 00000000 00:00 0 c3458000-c345f464 r-xs 00000000 00:0b 16384612 /usr/sbin/inetd c3470000-c34748f8 rw-p 00004000 00:0b 16384612 /usr/sbin/inetd c34cc000-c34d0000 rw-p 00000000 00:00 0 c34d4000-c34d8000 rw-p 00000000 00:00 0 c34d8000-c34dc000 rw-p 00000000 00:00 0 # cat /proc/610/stat 610 (inetd) S 1 610 610 0 -1 256 0 0 0 0 0 8 0 0 19 0 1 0 94392000718 950272 0 4294967295 3233480704 3233523592 3274440352 3274439976 3273467584 0 0 4096 90115 3221712796 0 0 17 0 0 0 0 The code boundaries are 3233480704 to 3233523592, which are: (gdb) p/x 3233480704 $1 = 0xc0bb0000 (gdb) p/x 3233523592 $2 = 0xc0bba788 Which corresponds to this line in the maps file: c0bb0000-c0bba788 r-xs 00000000 00:0b 14582157 /lib/ld-uClibc-0.9.28.so Which is wrong. After the patch is applied, the maps file is pretty much identical (there's some minor shuffling of the location of some of the anonymous VMAs), but the stat file is now: # cat /proc/610/stat 610 (inetd) S 1 610 610 0 -1 256 0 0 0 0 0 7 0 0 18 0 1 0 94392000722 950272 0 4294967295 3276111872 3276141668 3274440352 3274439976 3273467584 0 0 4096 90115 3221712796 0 0 17 0 0 0 0 The code boundaries are then 3276111872 to 3276141668, which are: (gdb) p/x 3276111872 $1 = 0xc3458000 (gdb) p/x 3276141668 $2 = 0xc345f464 And these correspond to this line in the maps file instead: c3458000-c345f464 r-xs 00000000 00:0b 16384612 /usr/sbin/inetd Which is now correct. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
James Morris authored
Fix the print formatting of three unsigned long fields in /proc/timer_list, which are currently being formatted as signed long. Signed-off-by:
James Morris <jmorris@namei.org> Acked-by:
-
Thomas Gleixner authored
It turned out that it is almost impossible to trust ACPI, BIOS & Co. regarding the C states. This was the reason to switch the local apic timer off in C2 state already. OTOH there are sane and well behaving systems, which get punished by that decision. Allow the user to confirm that the local apic timer is trustworthy in C2 state. This keeps the default behaviour on the safe side. Signed-off-by:
-
Linus Torvalds authored
This reverts commit 25496cae, which broke bootup on at least Ingo's ThinkPad T60. Need to figure out exactly what is wrong before we can re-do the logic. Requested-by:
-
Stefan Richter authored
The networking subsystem has been converted from class_device to device but ieee1394 hasn't. This results in a 100% reproducible NULL pointer dereference if the ohci1394 driver module is unloaded while the eth1394 module is still loaded. http://lkml.org/lkml/2006/11/16/147 http://lkml.org/lkml/2007/3/14/4 This is a regression in 2.6.21-rc1. Signed-off-by:
Stefan Richter <stefanr@s5r6.in-berlin.de> Tested-by:
Ismail Dönmez <ismail@pardus.org.tr>
-
Jeff Garzik authored
Arwin Vosselman pointed out: > The ewrk3-driver doesn't function with 2.6.16-kernels (used 2.6.16.41 for > my tests). Cards will never be detected due to this bug. > > drivers/net/ewrks3.c: > Line 417 reads: > > if (nicsr == (CSR_TXD | CSR_RXD)) > > that should be: > > if (nicsr != (CSR_TXD | CSR_RXD)) > > Comparison with the same line in v2.4 shows why: > > 2.4: > if (nicsr == (CSR_TXD | CSR_RXD)){ > > blah, blah > ========== > 2.6: > if (nicsr == (CSR_TXD | CSR_RXD)) > return -ENXIO; > > blah, blah > ========== > > blah,blah will not, but should, be executed in 2.6 with a card being present. > > The fix mentioned above solves this bug. Signed-off-by:Jeff Garzik <jeff@garzik.org>
-
Jeff Garzik authored
Merge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into tmp
-
Divy Le Ray authored
Use tabs instead of white spaces for CHELSIO_T3 entry. Signed-off-by:
Divy Le Ray <divy@chelsio.com> Signed-off-by:
-
Brice Goglin authored
Driver version is now 1.3.0-1.226. Signed-off-by:
Brice Goglin <brice@myri.com> Signed-off-by:
-
Brice Goglin authored
Fix management of allocated physical pages when the architecture page size is not 4kB since the firmware cannot cross 4K boundary. Signed-off-by:
-
Brice Goglin authored
Update the default value of 2 module parameters: * wcfifo disabled * intr_coal_delay 75us Signed-off-by:
-
Brice Goglin authored
[PATCH 1/4] myri10ge: Serverworks HT2100 provides aligned PCIe completion Use the regular firmware on Serverworks HT2100 PCIe ports since this chipset provides aligned PCIe completion. Signed-off-by:
-
Dale Farnsworth authored
mv643xx_eth_shutdown is needed for kexec. Signed-off-by:
Dale Farnsworth <dale@farnsworth.org> Signed-off-by:
-
Ralf Baechle authored
The SAA9730 driver doesn't quite grok what the difference between an ioport and memory mapped I/O is. It just happened to work on the one Linux system the SAA9730 happens to spend it's misserable existence on. drivers/net/saa9730.c: In function 'evm_saa9730_enable_lan_int': drivers/net/saa9730.c:68: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:70: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:72: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'evm_saa9730_disable_lan_int': drivers/net/saa9730.c:78: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:80: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'evm_saa9730_clear_lan_int': drivers/net/saa9730.c:85: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'evm_saa9730_block_lan_int': drivers/net/saa9730.c:91: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'evm_saa9730_unblock_lan_int': drivers/net/saa9730.c:97: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'show_saa9730_regs': drivers/net/saa9730.c:150: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_allocate_buffers': drivers/net/saa9730.c:292: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:295: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:302: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:305: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:312: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_cam_load': drivers/net/saa9730.c:329: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:332: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_mii_init': drivers/net/saa9730.c:369: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:395: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:403: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:410: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:432: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_control_init': drivers/net/saa9730.c:470: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:474: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:478: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:484: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:487: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:490: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:493: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_stop': drivers/net/saa9730.c:505: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:508: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:510: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_dma_init': drivers/net/saa9730.c:536: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_start': drivers/net/saa9730.c:556: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:560: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:564: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:567: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_tx': drivers/net/saa9730.c:590: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_rx': drivers/net/saa9730.c:664: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:729: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_write': drivers/net/saa9730.c:848: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_set_multicast': drivers/net/saa9730.c:943: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:949: warning: passing argument 2 of 'outl' makes integer from pointer without a cast Fixed by using writel instead of outl. 42 warnings less. Signed-off-by:
-
Li Yang authored
This reverts commit 18babd38. Michael Barkowski points out that it's wrong, and I agree. The patch causes a problem rather than fixes one after another patch "ucc_geth: Fix BD processing" was applied. Before that patch, current packet should be blocked. However after the patch current packet is ok and we only need to block next. Reported-by:
Michael Barkowski <michael.barkowski@freescale.com> Signed-off-by:
Li Yang <leoli@freescale.com> Signed-off-by:
-
Divy Le Ray authored
T3B2 does not lose its pcie config space on reset. Signed-off-by:
-
Divy Le Ray authored
Under rare conditions, the MAC might hang while generating a pause frame. This patch fine tunes the MAC settings to avoid the issue, allows for periodic MAC state check, and triggers a recovery if hung. Also fix one MAC statistics counter for the rev board T3B2. Signed-off-by:
-
Divy Le Ray authored
The driver attempts to upgrade the FW if the card has the wrong version. Signed-off-by:
-
Divy Le Ray authored
Limit ethtool -g/-G to the given port's queues. Signed-off-by:
-
