- 25 Feb, 2018 40 commits
-
-
Arnd Bergmann authored
commit e7c52b84 upstream. We get a lot of very large stack frames using gcc-7.0.1 with the default -fsanitize-address-use-after-scope --param asan-stack=1 options, which can easily cause an overflow of the kernel stack, e.g. drivers/gpu/drm/i915/gvt/handlers.c:2434:1: warning: the frame size of 46176 bytes is larger than 3072 bytes drivers/net/wireless/ralink/rt2x00/rt2800lib.c:5650:1: warning: the frame size of 23632 bytes is larger than 3072 bytes lib/atomic64_test.c:250:1: warning: the frame size of 11200 bytes is larger than 3072 bytes drivers/gpu/drm/i915/gvt/handlers.c:2621:1: warning: the frame size of 9208 bytes is larger than 3072 bytes drivers/media/dvb-frontends/stv090x.c:3431:1: warning: the frame size of 6816 bytes is larger than 3072 bytes fs/fscache/stats.c:287:1: warning: the frame size of 6536 bytes is larger than 3072 bytes To reduce this risk, -fsanitize-address-use-after-scope is now split out into a separate CONFIG_KASAN_EXTRA Kconfig option, leading to stack frames that are smaller than 2 kilobytes most of the time on x86_64. An earlier version of this patch also prevented combining KASAN_EXTRA with KASAN_INLINE, but that is no longer necessary with gcc-7.0.1. All patches to get the frame size below 2048 bytes with CONFIG_KASAN=y and CONFIG_KASAN_EXTRA=n have been merged by maintainers now, so we can bring back that default now. KASAN_EXTRA=y still causes lots of warnings but now defaults to !COMPILE_TEST to disable it in allmodconfig, and it remains disabled in all other defconfigs since it is a new option. I arbitrarily raise the warning limit for KASAN_EXTRA to 3072 to reduce the noise, but an allmodconfig kernel still has around 50 warnings on gcc-7. I experimented a bit more with smaller stack frames and have another follow-up series that reduces the warning limit for 64-bit architectures to 1280 bytes (without CONFIG_KASAN). With earlier versions of this patch series, I also had patches to address the warnings we get with KASAN and/or KASAN_EXTRA, using a "noinline_if_stackbloat" annotation. That annotation now got replaced with a gcc-8 bugfix (see https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715) and a workaround for older compilers, which means that KASAN_EXTRA is now just as bad as before and will lead to an instant stack overflow in a few extreme cases. This reverts parts of commit 3f181b4d ("lib/Kconfig.debug: disable -Wframe-larger-than warnings with KASAN=y"). Two patches in linux-next should be merged first to avoid introducing warnings in an allmodconfig build: 3cd890db ("media: dvb-frontends: fix i2c access helpers for KASAN") 16c3ada8 ("media: r820t: fix r820t_write_reg for KASAN") Do we really need to backport this? I think we do: without this patch, enabling KASAN will lead to unavoidable kernel stack overflow in certain device drivers when built with gcc-7 or higher on linux-4.10+ or any version that contains a backport of commit c5caf21a. Most people are probably still on older compilers, but it will get worse over time as they upgrade their distros. The warnings we get on kernels older than this should all be for code that uses dangerously large stack frames, though most of them do not cause an actual stack overflow by themselves.The asan-stack option was added in linux-4.0, and commit 3f181b4d ("lib/Kconfig.debug: disable -Wframe-larger-than warnings with KASAN=y") effectively turned off the warning for allmodconfig kernels, so I would like to see this fix backported to any kernels later than 4.0. I have done dozens of fixes for individual functions with stack frames larger than 2048 bytes with asan-stack, and I plan to make sure that all those fixes make it into the stable kernels as well (most are already there). Part of the complication here is that asan-stack (from 4.0) was originally assumed to always require much larger stacks, but that turned out to be a combination of multiple gcc bugs that we have now worked around and fixed, but sanitize-address-use-after-scope (from v4.10) has a much higher inherent stack usage and also suffers from at least three other problems that we have analyzed but not yet fixed upstream, each of them makes the stack usage more severe than it should be. Link: http://lkml.kernel.org/r/20171221134744.2295529-1-arnd@arndb.deSigned-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> [arnd: rebase to v4.4; only re-enable warning] Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sudip Mukherjee authored
commit db9b6040 upstream. We were getting build warning about: drivers/gpu/drm/gma500/mdfld_dsi_output.c:407:2: warning: initialization from incompatible pointer type The callback to dpms was pointing to a helper function which had a return type of void, whereas the callback should point to a function which has a return type of int. On closer look it turned out that we do not need the helper function since if we call drm_helper_connector_dpms() directly, the first check that drm_helper_connector_dpms() does is: if (mode == connector->dpms) Signed-off-by:
Sudip Mukherjee <sudip@vectorindia.org> Link: http://patchwork.freedesktop.org/patch/msgid/1454393155-13142-1-git-send-email-sudipm.mukherjee@gmail.comAcked-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> [arnd: rebased to 4.4] Signed-off-by:
-
Borislav Petkov authored
commit dac6ca24 upstream. With CONFIG_DEBUG_PREEMPT enabled, I get: BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1 caller is debug_smp_processor_id CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.12.0-rc2+ #2 Call Trace: dump_stack check_preemption_disabled debug_smp_processor_id save_microcode_in_initrd_amd ? microcode_init save_microcode_in_initrd ... because, well, it says it above, we're using smp_processor_id() in preemptible code. But passing the CPU number is not really needed. It is only used to determine whether we're on the BSP, and, if so, to save the microcode patch for early loading. [ We don't absolutely need to do it on the BSP but we do that customarily there. ] Instead, convert that function parameter to a boolean which denotes whether the patch should be saved or not, thereby avoiding the use of smp_processor_id() in preemptible code. Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170528200414.31305-1-bp@alien8.deSigned-off-by:
Ingo Molnar <mingo@kernel.org> [arnd: rebased to 4.9, after running into warning: arch/x86/kernel/cpu/microcode/amd.c:881:30: self-comparison always evaluates to true] Signed-off-by:
-
Michal Marek authored
commit d920f7c6 upstream. Do not try to recover too early and segfault when parsing invalid declarations such as echo 'int (int);' | scripts/genksyms/genksyms echo 'int a, (int);' | scripts/genksyms/genksyms echo 'extern void *__inline_memcpy((void *), (const void *), (__kernel_size_t));' | scripts/genksyms/genksyms The last one was a real-life bug with include/asm-generic/asm-prototypes.h on x86_64. Reported-and-tested-by:
Borislav Petkov <bp@alien8.de> Signed-off-by:
Michal Marek <mmarek@suse.com> [arnd: rebase to 4.4, regenerate parse.tab.{c,h}] Signed-off-by:
-
Andy Lutomirski authored
commit a570af48 upstream. dell-wmi and dell-laptop will compile but won't work right if DMI isn't selected. Signed-off-by:
Andy Lutomirski <luto@kernel.org> Acked-by:
Pali Rohár <pali.rohar@gmail.com> [arnd: Use depends instead of selects to avoid recursive dependencies] Signed-off-by:
Darren Hart <dvhart@linux.intel.com> [arnd: rebase to 4.4-stable] Signed-off-by:
-
Arnd Bergmann authored
commit b4391db4 upstream. When CONFIG_KASAN is enabled, the "--param asan-stack=1" causes rather large stack frames in some functions. This goes unnoticed normally because CONFIG_FRAME_WARN is disabled with CONFIG_KASAN by default as of commit 3f181b4d ("lib/Kconfig.debug: disable -Wframe-larger-than warnings with KASAN=y"). The kernelci.org build bot however has the warning enabled and that led me to investigate it a little further, as every build produces these warnings: net/wireless/nl80211.c:4389:1: warning: the frame size of 2240 bytes is larger than 2048 bytes [-Wframe-larger-than=] net/wireless/nl80211.c:1895:1: warning: the frame size of 3776 bytes is larger than 2048 bytes [-Wframe-larger-than=] net/wireless/nl80211.c:1410:1: warning: the frame size of 2208 bytes is larger than 2048 bytes [-Wframe-larger-than=] net/bridge/br_netlink.c:1282:1: warning: the frame size of 2544 bytes is larger than 2048 bytes [-Wframe-larger-than=] Most of this problem is now solved in gcc-8, which can consolidate the stack slots for the inline function arguments. On older compilers we can add a workaround by declaring a local variable in each function to pass the inline function argument. Cc: stable@vger.kernel.org Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715Signed-off-by:
David S. Miller <davem@davemloft.net> [arnd: rebased to 4.4-stable] Signed-off-by:
-
Vinod Koul authored
commit 3493d4a8 upstream. Randy reported following error when ACPI is not enabled: warning: (SND_SOC_INTEL_BYTCR_RT5640_MACH && SND_SOC_INTEL_BYTCR_RT5651_MACH && SND_SOC_INTEL_CHT_BSW_RT5672_MACH && SND_SOC_INTEL_CHT_BSW_RT5645_MACH && SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH) selects SND_SST_IPC_ACPI +which has unmet direct dependencies (SOUND && !M68K && !UML && SND && SND_SOC && ACPI) causing these build errors: In file included from ../sound/soc/intel/atom/sst/sst_acpi.c:40:0: ../include/acpi/acpi_bus.h:65:20: error: conflicting types for 'acpi_evaluate_dsm' union acpi_object *acpi_evaluate_dsm(acpi_handle handle, const u8 *uuid, In file included from ../sound/soc/intel/atom/sst/sst_acpi.c:31:0: ../include/linux/acpi.h:676:34: note: previous definition of 'acpi_evaluate_dsm' was here static inline union acpi_object *acpi_evaluate_dsm(acpi_handle handle, CONFIG_SND_SST_IPC_ACPI was already dependent upon ACPI, but that was not solving it. So move the depends up to machine drivers and remove from CONFIG_SND_SST_IPC_ACPI. Reported-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
Mark Brown <broonie@kernel.org> [arnd: rebased to PATCH kernel] Signed-off-by:
-
Arnd Bergmann authored
commit a262e87f upstream. For historic reasons, the tegra platform selects USB_ULPI from architecture code, but that hasn't really made sense for a long time, as the only user of that code is the Tegra EHCI driver that has its own Kconfig symbol. This removes the 'select' statements from mach-tegra and drivers/soc/tegra and adds them with the device driver that actually needs them. Signed-off-by:
Thierry Reding <treding@nvidia.com> [arnd: rebased to 4.4-stable] Signed-off-by:
-
Arnd Bergmann authored
gcc-6 and higher warn about the way some loops are written in the ncr5380 driver: drivers/scsi/g_NCR5380.c: In function 'generic_NCR5380_pread': drivers/scsi/g_NCR5380.c:541:3: error: this 'while' clause does not guard... [-Werror=misleading-indentation] while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY); ^~~~~ drivers/scsi/g_NCR5380.c:544:3: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the 'while' This was addressed in mainline kernels as part of a rework on commit 12150797 ("ncr5380: Use runtime register mapping"). We don't want the entire patch backported to stable kernels, but we can backport one hunk to get rid of the warning. Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Signed-off-by:
-
Arnd Bergmann authored
On linux-4.4 and linux-4.9 we get a warning about an array that is never initialized when CONFIG_REGULATOR is disabled: drivers/usb/phy/phy-msm-usb.c: In function 'msm_otg_probe': drivers/usb/phy/phy-msm-usb.c:1911:14: error: 'regs[0].consumer' may be used uninitialized in this function [-Werror=maybe-uninitialized] motg->vddcx = regs[0].consumer; ~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~ drivers/usb/phy/phy-msm-usb.c:1912:14: error: 'regs[1].consumer' may be used uninitialized in this function [-Werror=maybe-uninitialized] motg->v3p3 = regs[1].consumer; ~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~ drivers/usb/phy/phy-msm-usb.c:1913:14: error: 'regs[2].consumer' may be used uninitialized in this function [-Werror=maybe-uninitialized] motg->v1p8 = regs[2].consumer; This adds a Kconfig dependency for it. In newer kernels, the driver no longer exists, so this is only needed for stable kernels. Signed-off-by:
-
Arnd Bergmann authored
GCC correctly points out an uninitialized variable use when CONFIG_PCI is disabled. drivers/idle/i7300_idle.c: In function 'i7300_idle_notifier': include/asm-generic/bug.h:119:5: error: 'got_ctl' may be used uninitialized in this function [-Werror=maybe-uninitialized] if (unlikely(__ret_warn_once && !__warned)) { \ ^ drivers/idle/i7300_idle.c:415:5: note: 'got_ctl' was declared here u8 got_ctl; ^~~~~~~ The driver no longer exists in later kernels, so this patch only appplies to linux-4.9.y and earlier. Signed-off-by: -
Arnd Bergmann authored
When CONFIG_ELF_CORE is disabled, we get a harmless warning in the compat version of binfmt_elf: fs/compat_binfmt_elf.c:58:13: error: 'cputime_to_compat_timeval' defined but not used [-Werror=unused-function] This was addressed in mainline Linux as part of a larger rework with commit cd19c364 ("fs/binfmt: Convert obsolete cputime type to nsecs"). For 4.9 and earlier, this just shuts up the warning by adding an #ifdef around the function definition. Signed-off-by:
-
Arnd Bergmann authored
This driver shows warnings on many architectures: drivers/isdn/sc/init.c: In function 'identify_board': drivers/isdn/sc/init.c:484:2: error: passing argument 1 of 'readl' makes pointer from integer without a cast [-Werror] In newer kernels, it was completely removed, but for the 4.4-stable series, let's just shut up that warning by adding an extra variable to do the necessary type cast. Signed-off-by:
-
Arnd Bergmann authored
Without the I2C driver, we get a few warnings: drivers/power/bq27xxx_battery.c:288:12: error: 'bq27xxx_regs' defined but not used [-Werror=unused-variable] static u8 *bq27xxx_regs[] = { ^ drivers/power/bq27xxx_battery.c:994:12: error: 'bq27xxx_powersupply_init' defined but not used [-Werror=unused-function] static int bq27xxx_powersupply_init(struct bq27xxx_device_info *di, ^ drivers/power/bq27xxx_battery.c:1029:13: error: 'bq27xxx_powersupply_unregister' defined but not used [-Werror=unused-function] static void bq27xxx_powersupply_unregister(struct bq27xxx_device_info *di) ^ In mainline kernels, this was addressed by a larger rework in 703df6c0 ("power: bq27xxx_battery: Reorganize I2C into a module"). We probably don't want this backported into stable kernels, so instead let's shut up the warnings by marking the symbols as __maybe_unused. Signed-off-by: -
Arnd Bergmann authored
This reverts commit 6bd03ce3, it was applied in error and cuased this link failure drivers/built-in.o: In function `bq27xxx_battery_i2c_read': core.c:(.text+0xa6da8): undefined reference to `i2c_transfer' drivers/built-in.o: In function `bq27xxx_battery_init': core.c:(.init.text+0x68e0): undefined reference to `i2c_register_driver' drivers/built-in.o: In function `bq27xxx_battery_exit': core.c:(.exit.text+0xc6c): undefined reference to `i2c_del_driver' Later upstream kernels fixed this with a larger rework in commit 703df6c0 ("power: bq27xxx_battery: Reorganize I2C into a module"), but we cannot backport that to 4.4. Signed-off-by:
-
Miklos Szeredi authored
commit 9a232de4 upstream. Without CONFIG_NCPFS_NLS the following warning is seen: fs/ncpfs/dir.c: In function 'ncp_hash_dentry': fs/ncpfs/dir.c:136:23: warning: unused variable 'sb' [-Wunused-variable] struct super_block *sb = dentry->d_sb; Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
-
Arnd Bergmann authored
commit b115bebc upstream. When CONFIG_PM_SLEEP is disabled, we get a warning about unused functions: drivers/gpio/gpio-xgene.c:155:12: warning: 'xgene_gpio_resume' defined but not used [-Wunused-function] static int xgene_gpio_resume(struct device *dev) ^~~~~~~~~~~~~~~~~ drivers/gpio/gpio-xgene.c:142:12: warning: 'xgene_gpio_suspend' defined but not used [-Wunused-function] static int xgene_gpio_suspend(struct device *dev) The warnings are harmless and can be avoided by simplifying the code and marking the functions as __maybe_unused. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Arnd Bergmann authored
commit 747a1127 upstream. Building the hp100 ethernet driver causes warnings when both the PCI and EISA drivers are disabled: ethernet/hp/hp100.c: In function 'hp100_module_init': ethernet/hp/hp100.c:3047:2: warning: label 'out3' defined but not used [-Wunused-label] ethernet/hp/hp100.c: At top level: ethernet/hp/hp100.c:2828:13: warning: 'cleanup_dev' defined but not used [-Wunused-function] We can easily avoid the warnings and make the driver look slightly nicer by removing the #ifdefs that check for the CONFIG_PCI and CONFIG_EISA, as all the registration functions are designed to have no effect when the buses are disabled. Signed-off-by:
-
Jun Nie authored
commit 067fdeb2 upstream. Fix build warning that related to PAGE_SIZE. The maximum DMA length has nothing to do with PAGE_SIZE, just use a fix number for the definition. drivers/dma/zx_dma.c: In function 'zx_dma_prep_memcpy': drivers/dma/zx_dma.c:523:8: warning: division by zero [-Wdiv-by-zero] drivers/dma/zx_dma.c: In function 'zx_dma_prep_slave_sg': drivers/dma/zx_dma.c:567:11: warning: division by zero [-Wdiv-by-zero] Signed-off-by:
Jun Nie <jun.nie@linaro.org> Tested-by:
Shawn Guo <shawn.guo@linaro.org> Signed-off-by:
-
Arnd Bergmann authored
commit 11d8b058 upstream. The intialization function checks for various failure scenarios, but unfortunately the compiler gets a little confused about the possible combinations, leading to a false-positive build warning when -Wmaybe-uninitialized is set: arch/x86/events/core.c: In function ‘init_hw_perf_events’: arch/x86/events/core.c:264:3: warning: ‘reg_fail’ may be used uninitialized in this function [-Wmaybe-uninitialized] arch/x86/events/core.c:264:3: warning: ‘val_fail’ may be used uninitialized in this function [-Wmaybe-uninitialized] pr_err(FW_BUG "the BIOS has corrupted hw-PMU resources (MSR %x is %Lx)\n", We can't actually run into this case, so this shuts up the warning by initializing the variables to a known-invalid state. Suggested-by:
Peter Zijlstra <peterz@infradead.org> Signed-off-by:
-
Arnd Bergmann authored
commit 836856e3 upstream. The cw1200 uses #ifdef to check for CONFIG_PM, but then uses SIMPLE_DEV_PM_OPS, which leaves the references out when CONFIG_PM_SLEEP is not defined, so we get a warning with PM=y && PM_SLEEP=n: drivers/net/wireless/st/cw1200/cw1200_spi.c:450:12: error: 'cw1200_spi_suspend' defined but not used [-Werror=unused-function] This removes the incorrect #ifdef and instead uses a __maybe_unused annotation to let the compiler know it can silently drop the function definition. For the DEV_PM_OPS definition, we can use an IS_ENABLED() check to avoid defining the structure when CONFIG_PM is not set without the #ifdef. Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Arnd Bergmann authored
commit 7fc1503c upstream. On x86, the cw1200 driver produces a rather silly warning about the possible use of the 'ret' variable without an initialization presumably after being confused by the architecture specific definition of WARN_ON: drivers/net/wireless/st/cw1200/wsm.c: In function ‘wsm_handle_rx’: drivers/net/wireless/st/cw1200/wsm.c:1457:9: error: ‘ret’ may be used uninitialized in this function [-Werror=maybe-uninitialized] We have already checked that 'count' is larger than 0 here, so we know that 'ret' is initialized. Changing the 'for' loop into do/while also makes this clear to the compiler. Suggested-by:
David Laight <David.Laight@ACULAB.COM> Signed-off-by:
-
Arnd Bergmann authored
commit 7c8fe516 upstream. em28xx selects VIDEO_TUNER, which has a dependency on MEDIA_TUNER, so we get a Kconfig warning if that is disabled: warning: (VIDEO_PVRUSB2 && VIDEO_USBVISION && VIDEO_GO7007 && VIDEO_AU0828_V4L2 && VIDEO_CX231XX && VIDEO_TM6000 && VIDEO_EM28XX && VIDEO_IVTV && VIDEO_MXB && VIDEO_CX18 && VIDEO_CX23885 && VIDEO_CX88 && VIDEO_BT848 && VIDEO_SAA7134 && VIDEO_SAA7164) selects VIDEO_TUNER which has unmet direct dependencies (MEDIA_SUPPORT && MEDIA_TUNER) VIDEO_TUNER does not actually depend on MEDIA_TUNER, and the dependency does nothing except cause the above warning, so let's remove it. Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Arnd Bergmann authored
commit b97baa3e upstream. The i2c client pointer is only used when CONFIG_I2C is set, and otherwise produces a compile-time warning: drivers/media/usb/hdpvr/hdpvr-core.c: In function 'hdpvr_probe': drivers/media/usb/hdpvr/hdpvr-core.c:276:21: error: unused variable 'client' [-Werror=unused-variable] This uses the same #ifdef to hide the variable when the code using it is hidden. Signed-off-by:
-
Thierry Reding authored
commit 4f250706 upstream. If the DSI output isn't connected, then mdfld_dsi_encoder_get_pipe() will return -1. The mdfld_dsi_dp_mode_set() function doesn't properly check for this condition and causes the following compiler warnings: CC drivers/gpu/drm/gma500/mdfld_dsi_dpi.o drivers/gpu/drm/gma500/mdfld_dsi_dpi.c: In function ‘mdfld_dsi_dpi_mode_set’: drivers/gpu/drm/gma500/mdfld_dsi_dpi.c:828:35: warning: array subscript is below array bounds [-Warray-bounds] u32 pipeconf = dev_priv->pipeconf[pipe]; ^ drivers/gpu/drm/gma500/mdfld_dsi_dpi.c:829:33: warning: array subscript is below array bounds [-Warray-bounds] u32 dspcntr = dev_priv->dspcntr[pipe]; ^ Fix this by checking for a valid pipe before indexing the pipeconf and dspcntr arrays. Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Reviewed-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Link: http://patchwork.freedesktop.org/patch/msgid/1450178476-26284-2-git-send-email-boris.brezillon@free-electrons.comSigned-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Heikki Krogerus authored
commit 0ff42305 upstream. In order to enable HSU DMA PCI driver, the HSU DMA Engine must be enabled. This add a check for that. Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by:
-
Arnd Bergmann authored
commit d8fc2198 upstream. The rockchip spdif driver uses SIMPLE_DEV_PM_OPS to conditionally set its power management functions, but we get a warning about rk_spdif_runtime_resume being unused when CONFIG_PM is not set: sound/soc/rockchip/rockchip_spdif.c:67:12: error: 'rk_spdif_runtime_resume' defined but not used [-Werror=unused-function] This adds a __maybe_unused annotation so the compiler knows it can silently drop it instead of warning. Signed-off-by:
-
Arnd Bergmann authored
commit 27d80718 upstream. I noticed that this function uses a lot of kernel stack when the "latent entropy" plugin is enabled: drivers/isdn/hardware/eicon/message.c: In function 'sig_ind': drivers/isdn/hardware/eicon/message.c:6113:1: error: the frame size of 1168 bytes is larger than 1152 bytes [-Werror=frame-larger-than=] We currently don't warn about this, as we raise the warning limit to 2048 bytes in mainline, but I'd like to lower that limit again in the future, and this function can easily be changed to be more efficient and avoid that warning, by making some of its local variables 'const'. Signed-off-by:
-
Arnd Bergmann authored
commit 190b23b4 upstream. In randconfig builds that select VIDEO_EM28XX_V4L2 and MEDIA_SUBDRV_AUTOSELECT, but not MEDIA_CAMERA_SUPPORT, we get a Kconfig warning: warning: (VIDEO_EM28XX_V4L2) selects VIDEO_MT9V011 which has unmet direct dependencies (MEDIA_SUPPORT && I2C && VIDEO_V4L2 && MEDIA_CAMERA_SUPPORT) This avoids the warning by making that 'select' conditional on MEDIA_CAMERA_SUPPORT. Alternatively we could mark EM28XX as 'depends on MEDIA_CAMERA_SUPPORT', but it does not seem to have any real dependency on that itself. Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Arnd Bergmann authored
commit fa6317ee upstream. If MEDIA_SUBDRV_AUTOSELECT and VIDEO_GO7007 are both set, we automatically select VIDEO_OV7640, but that depends on MEDIA_CAMERA_SUPPORT, so we get a Kconfig warning if that is disabled: warning: (VIDEO_GO7007) selects VIDEO_OV7640 which has unmet direct dependencies (MEDIA_SUPPORT && I2C && VIDEO_V4L2 && MEDIA_CAMERA_SUPPORT) This adds another dependency so we don't accidentally select it when it is unavailable. Signed-off-by:
-
Arnd Bergmann authored
commit e42eef4b upstream. The rework of the posted interrupt handling broke building without support for the local APIC: ERROR: "boot_cpu_physical_apicid" [arch/x86/kvm/kvm-intel.ko] undefined! That configuration is probably not particularly useful anyway, so we can avoid the randconfig failures by adding a Kconfig dependency. Fixes: 8b306e2f ("KVM: VMX: avoid double list add with VT-d posted interrupts") Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Arnd Bergmann authored
commit ea4348c8 upstream. Older versions of gcc warn about the tca8418_irq_handler function as they can't keep track of the variable assignment inside of the loop when using the -Wmaybe-unintialized flag: drivers/input/keyboard/tca8418_keypad.c: In function ‘tca8418_irq_handler’: drivers/input/keyboard/tca8418_keypad.c:172:9: error: ‘reg’ may be used uninitialized in this function [-Werror=maybe-uninitialized] drivers/input/keyboard/tca8418_keypad.c:165:5: note: ‘reg’ was declared here This is fixed in gcc-6, but it's possible to rearrange the code in a way that avoids the warning on older compilers as well. Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Arnd Bergmann authored
commit b74c0a99 upstream. gcc-4.9 notices that the validate_init() function returns unintialized data when called with a zero 'nr_buffers' argument, when called with the -Wmaybe-uninitialized flag: drivers/gpu/drm/nouveau/nouveau_gem.c: In function ‘validate_init.isra.6’: drivers/gpu/drm/nouveau/nouveau_gem.c:457:5: error: ‘ret’ may be used uninitialized in this function [-Werror=maybe-uninitialized] However, the only caller of this function always passes a nonzero argument, and gcc-6 is clever enough to take this into account and not warn about it any more. Adding an explicit initialization to -EINVAL here is correct even if the caller changed, and it avoids the warning on gcc-4.9 as well. Signed-off-by:
Karol Herbst <karolherbst@gmail.com> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Arnd Bergmann authored
commit 3538aa6e upstream. While testing with CONFIG_UBSAN, I got this warning: drivers/media/i2c/tc358743.c: In function 'tc358743_probe': drivers/media/i2c/tc358743.c:1930:1: error: the frame size of 2480 bytes is larger than 2048 bytes [-Werror=frame-larger-than=] The problem is that the i2c_rd8/wr8/rd16/... functions in this driver pass a pointer to a local variable into a common function, and each call to one of them adds another variable plus redzone to the stack. I also noticed that the way this is done is broken on big-endian machines, as we copy the registers in CPU byte order. To address both those problems, I'm adding two helper functions for reading a register of up to 32 bits with correct endianess and change all other functions to use that instead. Just to be sure we don't get the problem back with changed optimizations in gcc, I'm also marking the new functions as 'noinline', although my tests with gcc-7 don't require that. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Randy Dunlap authored
commit 82ddecfe upstream. Fix build errors by limiting UNISYS_VISORINPUT to the INPUT kconfig setting. drivers/built-in.o: In function `visorinput_remove': visorinput.c:(.text+0x20802e): undefined reference to `input_unregister_device' drivers/built-in.o: In function `visorinput_probe': visorinput.c:(.text+0x208177): undefined reference to `input_allocate_device' visorinput.c:(.text+0x208241): undefined reference to `input_register_device' visorinput.c:(.text+0x20824d): undefined reference to `input_free_device' visorinput.c:(.text+0x208286): undefined reference to `input_allocate_device' visorinput.c:(.text+0x208302): undefined reference to `input_set_abs_params' visorinput.c:(.text+0x20831a): undefined reference to `input_set_abs_params' visorinput.c:(.text+0x20833f): undefined reference to `input_register_device' visorinput.c:(.text+0x20834b): undefined reference to `input_free_device' visorinput.c:(.text+0x20835f): undefined reference to `input_set_capability' drivers/built-in.o: In function `visorinput_channel_interrupt': visorinput.c:(.text+0x20851e): undefined reference to `input_event' visorinput.c:(.text+0x20862c): undefined reference to `input_event' drivers/built-in.o: In function `input_report_key': visorinput.c:(.text+0x207fd1): undefined reference to `input_event' drivers/built-in.o: In function `input_sync': visorinput.c:(.text+0x207fdc): undefined reference to `input_event' Signed-off-by:
-
Luis R. Rodriguez authored
commit 5abe9b26 upstream. As of next-20160607 with allyesconfig we get this linker failure: MODPOST vmlinux.o WARNING: vmlinux.o(.text+0x21bc0d): Section mismatch in reference from the function intel_scu_devices_create() to the function .init.text:i2c_register_board_info() This is caused by the fact that intel_scu_devices_create() calls i2c_register_board_info() and intel_scu_devices_create() is not annotated with __init. This typically involves manual code inspection and if one is certain this is correct we would just peg intel_scu_devices_create() with a __ref annotation. In this case this would be wrong though as the intel_scu_devices_create() call is exported, and used in the ipc_probe() on drivers/platform/x86/intel_scu_ipc.c. The issue is that even though builtin_pci_driver(ipc_driver) is used this just exposes the probe routine, which can occur at any point in time if this bus supports hotplug. A race can happen between kernel_init_freeable() that calls the init calls (in this case registeres the intel_scu_ipc.c driver, and later free_initmem(), which would free the i2c_register_board_info(). If a probe happens later in boot i2c_register_board_info() would not be present and we should get a page fault. Signed-off-by:
Luis R. Rodriguez <mcgrof@kernel.org> [wsa: made function declaration a one-liner] Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Arnd Bergmann authored
commit 733d0def upstream. The flexcop driver has two functions that are normally used, except when multiple frontend drivers are disabled: drivers/media/common/b2c2/flexcop-fe-tuner.c:42:12: warning: 'flexcop_set_voltage' defined but not used [-Wunused-function] drivers/media/common/b2c2/flexcop-fe-tuner.c:71:12: warning: 'flexcop_sleep' defined but not used [-Wunused-function] This avoids the build warning by updating the #ifdef for flexcop_set_voltage to the exact condition under which it is used. For flexcop_sleep, the condition is rather complex, so I resort to marking it as __maybe_unused, so the compiler can silently drop it. Signed-off-by:
-
Arnd Bergmann authored
commit 3021376d upstream. The cxgb4 prints an MMIO resource using the "0x%x" and "%p" format strings on the length and start, respective, but that triggers a compiler warning when using a 64-bit resource_size_t on a 32-bit architecture: drivers/infiniband/hw/cxgb4/device.c: In function 'c4iw_rdev_open': drivers/infiniband/hw/cxgb4/device.c:807:7: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] (void *)pci_resource_start(rdev->lldi.pdev, 2), This changes the format string to use %pR instead, which pretty-prints the resource, avoids the warning and is shorter. Signed-off-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Colin Ian King authored
commit 7ca6574a upstream. duplicate const can be removed, it is redundant. Found by static analysis using smatch. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Arnd Bergmann authored
commit ec3995da upstream. The newly added mediatek drivers for mt8173 select codes that depend on I2C, which cuases a build failure if I2C is disabled: warning: (SND_SOC_ADAU1761_I2C && SND_SOC_ADAU1781_I2C && SND_SOC_ADAU1977_I2C && SND_SOC_RT5677 && EXTCON_MAX14577 && EXTCON_MAX77693 && EXTCON_MAX77843 && BMC150_ACCEL_I2C && BMG160_I2C) selects REGMAP_I2C which has unmet direct dependencies (I2C) codecs/rt5645.c:3854:1: warning: data definition has no type or storage class codecs/rt5645.c:3854:1: error: type defaults to 'int' in declaration of 'module_i2c_driver' [-Werror=implicit-int] codecs/rt5677.c:5270:1: warning: data definition has no type or storage class 77_i2c_driver); codecs/rt5677.c:5270:1: error: type defaults to 'int' in declaration of 'module_i2c_driver' [-Werror=implicit-int] This adds an explicit dependency. Signed-off-by:
Koro Chen <koro.chen@mediatek.com> Signed-off-by:
-
