- 17 Sep, 2014 40 commits
-
-
Dave Chinner authored
commit 834ffca6 upstream. Similar to direct IO reads, direct IO writes are using truncate_pagecache_range to invalidate the page cache. This is incorrect due to the sub-block zeroing in the page cache that truncate_pagecache_range() triggers. This patch fixes things by using invalidate_inode_pages2_range instead. It preserves the page cache invalidation, but won't zero any pages. Signed-off-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dave Chinner authored
commit 22e757a4 upstream. generic/263 is failing fsx at this point with a page spanning EOF that cannot be invalidated. The operations are: 1190 mapwrite 0x52c00 thru 0x5e569 (0xb96a bytes) 1191 mapread 0x5c000 thru 0x5d636 (0x1637 bytes) 1192 write 0x5b600 thru 0x771ff (0x1bc00 bytes) where 1190 extents EOF from 0x54000 to 0x5e569. When the direct IO write attempts to invalidate the cached page over this range, it fails with -EBUSY and so any attempt to do page invalidation fails. The real question is this: Why can't that page be invalidated after it has been written to disk and cleaned? Well, there's data on the first two buffers in the page (1k block size, 4k page), but the third buffer on the page (i.e. beyond EOF) is failing drop_buffers because it's bh->b_state == 0x3, which is BH_Uptodate | BH_Dirty. IOWs, there's dirty buffers beyond EOF. Say what? OK, set_buffer_dirty() is called on all buffers from __set_page_buffers_dirty(), regardless of whether the buffer is beyond EOF or not, which means that when we get to ->writepage, we have buffers marked dirty beyond EOF that we need to clean. So, we need to implement our own .set_page_dirty method that doesn't dirty buffers beyond EOF. This is messy because the buffer code is not meant to be shared and it has interesting locking issues on the buffer dirty bits. So just copy and paste it and then modify it to suit what we need. Note: the solutions the other filesystems and generic block code use of marking the buffers clean in ->writepage does not work for XFS. It still leaves dirty buffers beyond EOF and invalidations still fail. Hence rather than play whack-a-mole, this patch simply prevents those buffers from being dirtied in the first place. Signed-off-by:
-
Dave Chinner authored
commit 5fd364fe upstream. When running xfs/305, I noticed that quotacheck was flushing dquot buffers that did not have the xfs_dquot_buf_ops verifiers attached: XFS (vdb): _xfs_buf_ioapply: no ops on block 0x1dc8/0x1dc8 ffff880052489000: 44 51 01 04 00 00 65 b8 00 00 00 00 00 00 00 00 DQ....e......... ffff880052489010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ ffff880052489020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ ffff880052489030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ CPU: 1 PID: 2376 Comm: mount Not tainted 3.16.0-rc2-dgc+ #306 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 ffff88006fe38000 ffff88004a0ffae8 ffffffff81cf1cca 0000000000000001 ffff88004a0ffb88 ffffffff814d50ca 000010004a0ffc70 0000000000000000 ffff88006be56dc4 0000000000000021 0000000000001dc8 ffff88007c773d80 Call Trace: [<ffffffff81cf1cca>] dump_stack+0x45/0x56 [<ffffffff814d50ca>] _xfs_buf_ioapply+0x3ca/0x3d0 [<ffffffff810db520>] ? wake_up_state+0x20/0x20 [<ffffffff814d51f5>] ? xfs_bdstrat_cb+0x55/0xb0 [<ffffffff814d513b>] xfs_buf_iorequest+0x6b/0xd0 [<ffffffff814d51f5>] xfs_bdstrat_cb+0x55/0xb0 [<ffffffff814d53ab>] __xfs_buf_delwri_submit+0x15b/0x220 [<ffffffff814d6040>] ? xfs_buf_delwri_submit+0x30/0x90 [<ffffffff814d6040>] xfs_buf_delwri_submit+0x30/0x90 [<ffffffff8150f89d>] xfs_qm_quotacheck+0x17d/0x3c0 [<ffffffff81510591>] xfs_qm_mount_quotas+0x151/0x1e0 [<ffffffff814ed01c>] xfs_mountfs+0x56c/0x7d0 [<ffffffff814f0f12>] xfs_fs_fill_super+0x2c2/0x340 [<ffffffff811c9fe4>] mount_bdev+0x194/0x1d0 [<ffffffff814f0c50>] ? xfs_finish_flags+0x170/0x170 [<ffffffff814ef0f5>] xfs_fs_mount+0x15/0x20 [<ffffffff811ca8c9>] mount_fs+0x39/0x1b0 [<ffffffff811e4d67>] vfs_kern_mount+0x67/0x120 [<ffffffff811e757e>] do_mount+0x23e/0xad0 [<ffffffff8117abde>] ? __get_free_pages+0xe/0x50 [<ffffffff811e71e6>] ? copy_mount_options+0x36/0x150 [<ffffffff811e8103>] SyS_mount+0x83/0xc0 [<ffffffff81cfd40b>] tracesys+0xdd/0xe2 This was caused by dquot buffer readahead not attaching a verifier structure to the buffer when readahead was issued, resulting in the followup read of the buffer finding a valid buffer and so not attaching new verifiers to the buffer as part of the read. Also, when a verifier failure occurs, we then read the buffer without verifiers. Attach the verifiers manually after this read so that if the buffer is then written it will be verified that the corruption has been repaired. Further, when flushing a dquot we don't ask for a verifier when reading in the dquot buffer the dquot belongs to. Most of the time this isn't an issue because the buffer is still cached, but when it is not cached it will result in writing the dquot buffer without having the verfier attached. Signed-off-by:
-
Steve Wise authored
commit 2f0304d2 upstream. If the user creates a listening cm_id with backlog of 0 the IWCM ends up not allowing any connection requests at all. The correct behavior is for the IWCM to pick a default value if the user backlog parameter is zero. Lustre from version 1.8.8 onward uses a backlog of 0, which breaks iwarp support without this fix. Signed-off-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
Roland Dreier <roland@purestorage.com> Signed-off-by:
-
NeilBrown authored
commit b3968552 upstream. When a raid10 commences a resync/recovery/reshape it allocates some buffer space. When a resync/recovery completes the buffer space is freed. But not when the reshape completes. This can result in a small memory leak. There is a subtle side-effect of this bug. When a RAID10 is reshaped to a larger array (more devices), the reshape is immediately followed by a "resync" of the new space. This "resync" will use the buffer space which was allocated for "reshape". This can cause problems including a "BUG" in the SCSI layer. So this is suitable for -stable. Fixes: 3ea7daa5Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
NeilBrown authored
commit ce0b0a46 upstream. raid10 reshape clears unwanted bits from a bio->bi_flags using a method which, while clumsy, worked until 3.10 when BIO_OWNS_VEC was added. Since then it clears that bit but shouldn't. This results in a memory leak. So change to used the approved method of clearing unwanted bits. As this causes a memory leak which can consume all of memory the fix is suitable for -stable. Fixes: a38352e0 Reported-by: mdraid.pkoch@dfgh.net (Peter Koch) Signed-off-by:
-
NeilBrown authored
commit 9c4bdf69 upstream. During recovery of a double-degraded RAID6 it is possible for some blocks not to be recovered properly, leading to corruption. If a write happens to one block in a stripe that would be written to a missing device, and at the same time that stripe is recovering data to the other missing device, then that recovered data may not be written. This patch skips, in the double-degraded case, an optimisation that is only safe for single-degraded arrays. Bug was introduced in 2.6.32 and fix is suitable for any kernel since then. In an older kernel with separate handle_stripe5() and handle_stripe6() functions the patch must change handle_stripe6(). Fixes: 6c0069c0 Cc: Yuri Tikhonov <yur@emcraft.com> Cc: Dan Williams <dan.j.williams@intel.com> Reported-by:
"Manibalan P" <pmanibalan@amiindia.co.in> Tested-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Vignesh Raman authored
commit 32333edb upstream. The commits 08c30aca "Bluetooth: Remove RFCOMM session refcnt" and 8ff52f7d "Bluetooth: Return RFCOMM session ptrs to avoid freed session" allow rfcomm_recv_ua and rfcomm_session_close to delete the session (and free the corresponding socket) and propagate NULL session pointer to the upper callers. Additional fix is required to terminate the loop in rfcomm_process_rx function to avoid use of freed 'sk' memory. The issue is only reproducible with kernel option CONFIG_PAGE_POISONING enabled making freed memory being changed and filled up with fixed char value used to unmask use-after-free issues. Signed-off-by:
Vignesh Raman <Vignesh_Raman@mentor.com> Signed-off-by:
Vitaly Kuzmichev <Vitaly_Kuzmichev@mentor.com> Acked-by:
Dean Jenkins <Dean_Jenkins@mentor.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Vladimir Davydov authored
commit 093facf3 upstream. If the current process is exiting, lingering on socket close will make it unkillable, so we should avoid it. Reproducer: #include <sys/types.h> #include <sys/socket.h> #define BTPROTO_L2CAP 0 #define BTPROTO_SCO 2 #define BTPROTO_RFCOMM 3 int main() { int fd; struct linger ling; fd = socket(PF_BLUETOOTH, SOCK_STREAM, BTPROTO_RFCOMM); //or: fd = socket(PF_BLUETOOTH, SOCK_DGRAM, BTPROTO_L2CAP); //or: fd = socket(PF_BLUETOOTH, SOCK_SEQPACKET, BTPROTO_SCO); ling.l_onoff = 1; ling.l_linger = 1000000000; setsockopt(fd, SOL_SOCKET, SO_LINGER, &ling, sizeof(ling)); return 0; } Signed-off-by:
Vladimir Davydov <vdavydov@parallels.com> Signed-off-by:
-
Eric W. Biederman authored
commit db181ce0 upstream. Kenton Varda <kenton@sandstorm.io> discovered that by remounting a read-only bind mount read-only in a user namespace the MNT_LOCK_READONLY bit would be cleared, allowing an unprivileged user to the remount a read-only mount read-write. Upon review of the code in remount it was discovered that the code allowed nosuid, noexec, and nodev to be cleared. It was also discovered that the code was allowing the per mount atime flags to be changed. The first naive patch to fix these issues contained the flaw that using default atime settings when remounting a filesystem could be disallowed. To avoid this problems in the future add tests to ensure unprivileged remounts are succeeding and failing at the appropriate times. Acked-by:
Serge E. Hallyn <serge.hallyn@ubuntu.com> Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Eric W. Biederman authored
commit ffbc6f0e upstream. Since March 2009 the kernel has treated the state that if no MS_..ATIME flags are passed then the kernel defaults to relatime. Defaulting to relatime instead of the existing atime state during a remount is silly, and causes problems in practice for people who don't specify any MS_...ATIME flags and to get the default filesystem atime setting. Those users may encounter a permission error because the default atime setting does not work. A default that does not work and causes permission problems is ridiculous, so preserve the existing value to have a default atime setting that is always guaranteed to work. Using the default atime setting in this way is particularly interesting for applications built to run in restricted userspace environments without /proc mounted, as the existing atime mount options of a filesystem can not be read from /proc/mounts. In practice this fixes user space that uses the default atime setting on remount that are broken by the permission checks keeping less privileged users from changing more privileged users atime settings. Acked-by:
-
Eric W. Biederman authored
commit 9566d674 upstream. While invesgiating the issue where in "mount --bind -oremount,ro ..." would result in later "mount --bind -oremount,rw" succeeding even if the mount started off locked I realized that there are several additional mount flags that should be locked and are not. In particular MNT_NOSUID, MNT_NODEV, MNT_NOEXEC, and the atime flags in addition to MNT_READONLY should all be locked. These flags are all per superblock, can all be changed with MS_BIND, and should not be changable if set by a more privileged user. The following additions to the current logic are added in this patch. - nosuid may not be clearable by a less privileged user. - nodev may not be clearable by a less privielged user. - noexec may not be clearable by a less privileged user. - atime flags may not be changeable by a less privileged user. The logic with atime is that always setting atime on access is a global policy and backup software and auditing software could break if atime bits are not updated (when they are configured to be updated), and serious performance degradation could result (DOS attack) if atime updates happen when they have been explicitly disabled. Therefore an unprivileged user should not be able to mess with the atime bits set by a more privileged user. The additional restrictions are implemented with the addition of MNT_LOCK_NOSUID, MNT_LOCK_NODEV, MNT_LOCK_NOEXEC, and MNT_LOCK_ATIME mnt flags. Taken together these changes and the fixes for MNT_LOCK_READONLY should make it safe for an unprivileged user to create a user namespace and to call "mount --bind -o remount,... ..." without the danger of mount flags being changed maliciously. Acked-by:
-
Eric W. Biederman authored
commit 07b64558 upstream. There are no races as locked mount flags are guaranteed to never change. Moving the test into do_remount makes it more visible, and ensures all filesystem remounts pass the MNT_LOCK_READONLY permission check. This second case is not an issue today as filesystem remounts are guarded by capable(CAP_DAC_ADMIN) and thus will always fail in less privileged mount namespaces, but it could become an issue in the future. Acked-by:
-
Eric W. Biederman authored
commit a6138db8 upstream. Kenton Varda <kenton@sandstorm.io> discovered that by remounting a read-only bind mount read-only in a user namespace the MNT_LOCK_READONLY bit would be cleared, allowing an unprivileged user to the remount a read-only mount read-write. Correct this by replacing the mask of mount flags to preserve with a mask of mount flags that may be changed, and preserve all others. This ensures that any future bugs with this mask and remount will fail in an easy to detect way where new mount flags simply won't change. Acked-by:
-
Steven Rostedt (Red Hat) authored
commit 021de3d9 upstream. After writting a test to try to trigger the bug that caused the ring buffer iterator to become corrupted, I hit another bug: WARNING: CPU: 1 PID: 5281 at kernel/trace/ring_buffer.c:3766 rb_iter_peek+0x113/0x238() Modules linked in: ipt_MASQUERADE sunrpc [...] CPU: 1 PID: 5281 Comm: grep Tainted: G W 3.16.0-rc3-test+ #143 Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007 0000000000000000 ffffffff81809a80 ffffffff81503fb0 0000000000000000 ffffffff81040ca1 ffff8800796d6010 ffffffff810c138d ffff8800796d6010 ffff880077438c80 ffff8800796d6010 ffff88007abbe600 0000000000000003 Call Trace: [<ffffffff81503fb0>] ? dump_stack+0x4a/0x75 [<ffffffff81040ca1>] ? warn_slowpath_common+0x7e/0x97 [<ffffffff810c138d>] ? rb_iter_peek+0x113/0x238 [<ffffffff810c138d>] ? rb_iter_peek+0x113/0x238 [<ffffffff810c14df>] ? ring_buffer_iter_peek+0x2d/0x5c [<ffffffff810c6f73>] ? tracing_iter_reset+0x6e/0x96 [<ffffffff810c74a3>] ? s_start+0xd7/0x17b [<ffffffff8112b13e>] ? kmem_cache_alloc_trace+0xda/0xea [<ffffffff8114cf94>] ? seq_read+0x148/0x361 [<ffffffff81132d98>] ? vfs_read+0x93/0xf1 [<ffffffff81132f1b>] ? SyS_read+0x60/0x8e [<ffffffff8150bf9f>] ? tracesys+0xdd/0xe2 Debugging this bug, which triggers when the rb_iter_peek() loops too many times (more than 2 times), I discovered there's a case that can cause that function to legitimately loop 3 times! rb_iter_peek() is different than rb_buffer_peek() as the rb_buffer_peek() only deals with the reader page (it's for consuming reads). The rb_iter_peek() is for traversing the buffer without consuming it, and as such, it can loop for one more reason. That is, if we hit the end of the reader page or any page, it will go to the next page and try again. That is, we have this: 1. iter->head > iter->head_page->page->commit (rb_inc_iter() which moves the iter to the next page) try again 2. event = rb_iter_head_event() event->type_len == RINGBUF_TYPE_TIME_EXTEND rb_advance_iter() try again 3. read the event. But we never get to 3, because the count is greater than 2 and we cause the WARNING and return NULL. Up the counter to 3. Fixes: 69d1b839 "ring-buffer: Bind time extend and data events together" Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Steven Rostedt (Red Hat) authored
commit 651e22f2 upstream. When performing a consuming read, the ring buffer swaps out a page from the ring buffer with a empty page and this page that was swapped out becomes the new reader page. The reader page is owned by the reader and since it was swapped out of the ring buffer, writers do not have access to it (there's an exception to that rule, but it's out of scope for this commit). When reading the "trace" file, it is a non consuming read, which means that the data in the ring buffer will not be modified. When the trace file is opened, a ring buffer iterator is allocated and writes to the ring buffer are disabled, such that the iterator will not have issues iterating over the data. Although the ring buffer disabled writes, it does not disable other reads, or even consuming reads. If a consuming read happens, then the iterator is reset and starts reading from the beginning again. My tests would sometimes trigger this bug on my i386 box: WARNING: CPU: 0 PID: 5175 at kernel/trace/trace.c:1527 __trace_find_cmdline+0x66/0xaa() Modules linked in: CPU: 0 PID: 5175 Comm: grep Not tainted 3.16.0-rc3-test+ #8 Hardware name: /DG965MQ, BIOS MQ96510J.86A.0372.2006.0605.1717 06/05/2006 00000000 00000000 f09c9e1c c18796b3 c1b5d74c f09c9e4c c103a0e3 c1b5154b f09c9e78 00001437 c1b5d74c 000005f7 c10bd85a c10bd85a c1cac57c f09c9eb0 ed0e0000 f09c9e64 c103a185 00000009 f09c9e5c c1b5154b f09c9e78 f09c9e80^M Call Trace: [<c18796b3>] dump_stack+0x4b/0x75 [<c103a0e3>] warn_slowpath_common+0x7e/0x95 [<c10bd85a>] ? __trace_find_cmdline+0x66/0xaa [<c10bd85a>] ? __trace_find_cmdline+0x66/0xaa [<c103a185>] warn_slowpath_fmt+0x33/0x35 [<c10bd85a>] __trace_find_cmdline+0x66/0xaa^M [<c10bed04>] trace_find_cmdline+0x40/0x64 [<c10c3c16>] trace_print_context+0x27/0xec [<c10c4360>] ? trace_seq_printf+0x37/0x5b [<c10c0b15>] print_trace_line+0x319/0x39b [<c10ba3fb>] ? ring_buffer_read+0x47/0x50 [<c10c13b1>] s_show+0x192/0x1ab [<c10bfd9a>] ? s_next+0x5a/0x7c [<c112e76e>] seq_read+0x267/0x34c [<c1115a25>] vfs_read+0x8c/0xef [<c112e507>] ? seq_lseek+0x154/0x154 [<c1115ba2>] SyS_read+0x54/0x7f [<c188488e>] syscall_call+0x7/0xb ---[ end trace 3f507febd6b4cc83 ]--- >>>> ##### CPU 1 buffer started #### Which was the __trace_find_cmdline() function complaining about the pid in the event record being negative. After adding more test cases, this would trigger more often. Strangely enough, it would never trigger on a single test, but instead would trigger only when running all the tests. I believe that was the case because it required one of the tests to be shutting down via delayed instances while a new test started up. After spending several days debugging this, I found that it was caused by the iterator becoming corrupted. Debugging further, I found out why the iterator became corrupted. It happened with the rb_iter_reset(). As consuming reads may not read the full reader page, and only part of it, there's a "read" field to know where the last read took place. The iterator, must also start at the read position. In the rb_iter_reset() code, if the reader page was disconnected from the ring buffer, the iterator would start at the head page within the ring buffer (where writes still happen). But the mistake there was that it still used the "read" field to start the iterator on the head page, where it should always start at zero because readers never read from within the ring buffer where writes occur. I originally wrote a patch to have it set the iter->head to 0 instead of iter->head_page->read, but then I questioned why it wasn't always setting the iter to point to the reader page, as the reader page is still valid. The list_empty(reader_page->list) just means that it was successful in swapping out. But the reader_page may still have data. There was a bug report a long time ago that was not reproducible that had something about trace_pipe (consuming read) not matching trace (iterator read). This may explain why that happened. Anyway, the correct answer to this bug is to always use the reader page an not reset the iterator to inside the writable ring buffer. Fixes: d769041f "ring_buffer: implement new locking" Signed-off-by:
-
Jiri Kosina authored
commit 6726655d upstream. There is a following AB-BA dependency between cpu_hotplug.lock and cpuidle_lock: 1) cpu_hotplug.lock -> cpuidle_lock enable_nonboot_cpus() _cpu_up() cpu_hotplug_begin() LOCK(cpu_hotplug.lock) cpu_notify() ... acpi_processor_hotplug() cpuidle_pause_and_lock() LOCK(cpuidle_lock) 2) cpuidle_lock -> cpu_hotplug.lock acpi_os_execute_deferred() workqueue ... acpi_processor_cst_has_changed() cpuidle_pause_and_lock() LOCK(cpuidle_lock) get_online_cpus() LOCK(cpu_hotplug.lock) Fix this by reversing the order acpi_processor_cst_has_changed() does thigs -- let it first execute the protection against CPU hotplug by calling get_online_cpus() and obtain the cpuidle lock only after that (and perform the symmentric change when allowing CPUs hotplug again and dropping cpuidle lock). Spotted by lockdep. Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Lan Tianyu authored
commit 236105db upstream. Currently, notify callbacks for fixed button events are run from interrupt context. That is not necessary and after commit 0bf6368e (ACPI / button: Add ACPI Button event via netlink routine) it causes netlink routines to be called from interrupt context which is not correct. Also, that is different from non-fixed device events (including non-fixed button events) whose notify callbacks are all executed from process context. For the above reasons, make fixed button device notify callbacks run in process context which will avoid the deadlock when using netlink to report button events to user space. Fixes: 0bf6368e (ACPI / button: Add ACPI Button event via netlink routine) Link: https://lkml.org/lkml/2014/8/21/606Reported-by:
Benjamin Block <bebl@mageta.org> Reported-by:
Knut Petersen <Knut_Petersen@t-online.de> Signed-off-by:
Lan Tianyu <tianyu.lan@intel.com> [rjw: Function names, subject and changelog.] Signed-off-by:
-
David E. Box authored
commit 8aa5e56e upstream. Adds return status check on copy routines to delete the allocated destination object if either copy fails. Reported by Colin Ian King on bugs.acpica.org, Bug 1087. The last applicable commit: Commit: 3371c19c Subject: ACPICA: Remove ACPI_GET_OBJECT_TYPE macro Link: https://bugs.acpica.org/show_bug.cgi?id=1087Reported-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
David E. Box <david.e.box@linux.intel.com> Signed-off-by:
Bob Moore <robert.moore@intel.com> Signed-off-by:
Lv Zheng <lv.zheng@intel.com> Signed-off-by:
-
Ben Hutchings authored
commit 03a6c3ff upstream. bfa_swap_words() shifts its argument (assumed to be 64-bit) by 32 bits each way. In two places the argument type is dma_addr_t, which may be 32-bit, in which case the effect of the bit shift is undefined: drivers/scsi/bfa/bfa_fcpim.c: In function 'bfa_ioim_send_ioreq': drivers/scsi/bfa/bfa_fcpim.c:2497:4: warning: left shift count >= width of type [enabled by default] addr = bfa_sgaddr_le(sg_dma_address(sg)); ^ drivers/scsi/bfa/bfa_fcpim.c:2497:4: warning: right shift count >= width of type [enabled by default] drivers/scsi/bfa/bfa_fcpim.c:2509:4: warning: left shift count >= width of type [enabled by default] addr = bfa_sgaddr_le(sg_dma_address(sg)); ^ drivers/scsi/bfa/bfa_fcpim.c:2509:4: warning: right shift count >= width of type [enabled by default] Avoid this by adding casts to u64 in bfa_swap_words(). Compile-tested only. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Reviewed-by:
Martin K. Petersen <martin.petersen@oracle.com> Acked-by:
Anil Gurumurthy <anil.gurumurthy@qlogic.com> Fixes: f16a1750 ('[SCSI] bfa: remove all OS wrappers') Signed-off-by:
-
Daniel Mack authored
commit 9301503a upstream. This mode is unsupported, as the DMA controller can't do zero-padding of samples. Signed-off-by:
Daniel Mack <zonque@gmail.com> Reported-by:
Johannes Stezenbach <js@sig21.net> Signed-off-by:
Mark Brown <broonie@linaro.org> Signed-off-by:
-
Jarkko Nikula authored
commit 4adeb0cc upstream. max98090.c doesn't free the threaded interrupt it requests. This causes an oops when doing "cat /proc/interrupts" after snd-soc-max98090.ko is unloaded. Fix this by requesting the interrupt by using devm_request_threaded_irq(). Signed-off-by:
Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by:
-
Sylwester Nawrocki authored
commit d3d4e524 upstream. We should save/restore relevant I2S registers regardless of the dai->active flag, otherwise some settings are being lost after system suspend/resume cycle. E.g. I2S slave mode set only during dai initialization is not preserved and the device ends up in master mode after system resume. Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Praveen Diwakar authored
commit 0a37c6ef upstream. Since MODULE_LICENSE is missing the module load fails, so add this for module. Signed-off-by:
Praveen Diwakar <praveen.diwakar@intel.com> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Reviewed-by:
Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by:
-
Qiao Zhou authored
commit 7ed9de76 upstream. we need to release dapm widget list after dpcm_path_get in soc_dpcm_runtime_update. otherwise, there will be potential memory leak. add dpcm_path_put to fix it. Signed-off-by:
Qiao Zhou <zhouqiao@marvell.com> Signed-off-by:
-
Jonas Bonn authored
commit 10f67dbf upstream. The mainline signal handling code for OpenRISC has been buggy since day one with respect to syscall restart. This patch significantly reworks the signal handling code: i) Move the "work pending" loop to C code (borrowed from ARM arch) ii) Allow a tracer to muck about with the IP and skip syscall restart in that case (again, borrowed from ARM) iii) Make signal handling WRT syscall restart actually work v) Make the signal handling code look more like that of other architectures so that it's easier for others to follow Reported-by:
Anders Nystrom <anders@southpole.se> Signed-off-by:
Jonas Bonn <jonas@southpole.se> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Ralf Baechle authored
commit ff522058 upstream. This fixes the following issue BUG: using smp_processor_id() in preemptible [00000000] code: kjournald/1761 caller is blast_dcache32+0x30/0x254 Call Trace: [<8047f02c>] dump_stack+0x8/0x34 [<802e7e40>] debug_smp_processor_id+0xe0/0xf0 [<80114d94>] blast_dcache32+0x30/0x254 [<80118484>] r4k_dma_cache_wback_inv+0x200/0x288 [<80110ff0>] mips_dma_map_sg+0x108/0x180 [<80355098>] ide_dma_prepare+0xf0/0x1b8 [<8034eaa4>] do_rw_taskfile+0x1e8/0x33c [<8035951c>] ide_do_rw_disk+0x298/0x3e4 [<8034a3c4>] do_ide_request+0x2e0/0x704 [<802bb0dc>] __blk_run_queue+0x44/0x64 [<802be000>] queue_unplugged.isra.36+0x1c/0x54 [<802beb94>] blk_flush_plug_list+0x18c/0x24c [<802bec6c>] blk_finish_plug+0x18/0x48 [<8026554c>] journal_commit_transaction+0x3b8/0x151c [<80269648>] kjournald+0xec/0x238 [<8014ac00>] kthread+0xb8/0xc0 [<8010268c>] ret_from_kernel_thread+0x14/0x1c Caches in most systems are identical - but not always, so we can't avoid the use of smp_call_function() by just looking at the boot CPU's data, have to fiddle with preemption instead. Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5835 Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Aaro Koskinen authored
commit 60830868 upstream. get_system_type() is not thread-safe on OCTEON. It uses static data, also more dangerous issue is that it's calling cvmx_fuse_read_byte() every time without any synchronization. Currently it's possible to get processes stuck looping forever in kernel simply by launching multiple readers of /proc/cpuinfo: (while true; do cat /proc/cpuinfo > /dev/null; done) & (while true; do cat /proc/cpuinfo > /dev/null; done) & ... Fix by initializing the system type string only once during the early boot. Signed-off-by:
Aaro Koskinen <aaro.koskinen@nsn.com> Reviewed-by:
Markos Chandras <markos.chandras@imgtec.com> Patchwork: http://patchwork.linux-mips.org/patch/7437/Signed-off-by:
James Hogan <james.hogan@imgtec.com> Signed-off-by:
-
Markos Chandras authored
commit 137f7df8 upstream. Add _TIF_SECCOMP flag to _TIF_WORK_SYSCALL_ENTRY to indicate that the system call needs to be checked against a seccomp filter. Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Reviewed-by:
-
Ralf Baechle authored
commit e7f3b48a upstream. This will simplify further modifications. Signed-off-by:
-
Alex Smith authored
commit bcec7c8d upstream. Get rid of the WANT_COMPAT_REG_H test and instead define both the 32- and 64-bit register offset definitions at the same time with MIPS{32,64}_ prefixes, then define the existing EF_* names to the correct definitions for the kernel's bitness. This patch is a prerequisite of the following bug fix patch. Signed-off-by:
Alex Smith <alex@alex-smith.me.uk> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7451/Signed-off-by:
-
Huacai Chen authored
commit 2e5767a2 upstream. In do_ade(), is_fpu_owner() isn't preempt-safe. For example, when an unaligned ldc1 is executed, do_cpu() is called and then FPU will be enabled (and TIF_USEDFPU will be set for the current process). Then, do_ade() is called because the access is unaligned. If the current process is preempted at this time, TIF_USEDFPU will be cleard. So when the process is scheduled again, BUG_ON(!is_fpu_owner()) is triggered. This small program can trigger this BUG in a preemptible kernel: int main (int argc, char *argv[]) { double u64[2]; while (1) { asm volatile ( ".set push \n\t" ".set noreorder \n\t" "ldc1 $f3, 4(%0) \n\t" ".set pop \n\t" ::"r"(u64): ); } return 0; } V2: Remove the BUG_ON() unconditionally due to Paul's suggestion. Signed-off-by:
Huacai Chen <chenhc@lemote.com> Signed-off-by:
Jie Chen <chenj@lemote.com> Signed-off-by:
Rui Wang <wangr@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Signed-off-by:
-
Huacai Chen authored
commit 8393c524 upstream. In commit 2c8c53e2 (MIPS: Optimize TLB handlers for Octeon CPUs) build_r4000_tlb_refill_handler() is modified. But it doesn't compatible with the original code in HUGETLB case. Because there is a copy & paste error and one line of code is missing. It is very easy to produce a bug with LTP's hugemmap05 test. Signed-off-by:
Binbin Zhou <zhoubb@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/7496/Signed-off-by:
-
Paul Burton authored
commit b1442d39 upstream. If one or more matching FCSR cause & enable bits are set in saved thread context then when that context is restored the kernel will take an FP exception. This is of course undesirable and considered an oops, leading to the kernel writing a backtrace to the console and potentially rebooting depending upon the configuration. Thus the kernel avoids this situation by clearing the cause bits of the FCSR register when handling FP exceptions and after emulating FP instructions. However the kernel does not prevent userland from setting arbitrary FCSR cause & enable bits via ptrace, using either the PTRACE_POKEUSR or PTRACE_SETFPREGS requests. This means userland can trivially cause the kernel to oops on any system with an FPU. Prevent this from happening by clearing the cause bits when writing to the saved FCSR context via ptrace. This problem appears to exist at least back to the beginning of the git era in the PTRACE_POKEUSR case. Signed-off-by:
-
Jeffrey Deans authored
commit ffc8415a upstream. A GIC interrupt which is declared as having a GIC_MAP_TO_NMI_MSK mapping causes the cpu parameter to gic_setup_intr() to be increased to 32, causing memory corruption when pcpu_masks[] is written to again later in the function. Signed-off-by:
Jeffrey Deans <jeffrey.deans@imgtec.com> Signed-off-by:
-
K. Y. Srinivasan authored
commit 3533f860 upstream. On some Windows hosts on FC SANs, TEST_UNIT_READY can return SRB_STATUS_ERROR. Correctly handle this. Note that there is sufficient sense information to support scsi error handling even in this case. Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Reviewed-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
-
K. Y. Srinivasan authored
commit 56b26e69 upstream. On Azure, we have seen instances of unbounded I/O latencies. To deal with this issue, implement handler that can reset the timeout. Note that the host gaurantees that it will respond to each command that has been issued. Signed-off-by:
-
Gavin Shan authored
commit f1b3929c upstream. While running command "drmgr -c phb -r -s 'PHB 528'", following backtrace jumped out because the target device node isn't marked with OF_DETACHED by of_detach_node(), which caused by error returned from memory hotplug related reconfig notifier when disabling CONFIG_MEMORY_HOTREMOVE. The patch fixes it. ERROR: Bad of_node_put() on /pci@800000020000210/ethernet@0 CPU: 14 PID: 2252 Comm: drmgr Tainted: G W 3.16.0+ #427 Call Trace: [c000000012a776a0] [c000000000013d9c] .show_stack+0x88/0x148 (unreliable) [c000000012a77750] [c00000000083cd34] .dump_stack+0x7c/0x9c [c000000012a777d0] [c0000000006807c4] .of_node_release+0x58/0xe0 [c000000012a77860] [c00000000038a7d0] .kobject_release+0x174/0x1b8 [c000000012a77900] [c00000000038a884] .kobject_put+0x70/0x78 [c000000012a77980] [c000000000681680] .of_node_put+0x28/0x34 [c000000012a77a00] [c000000000681ea8] .__of_get_next_child+0x64/0x70 [c000000012a77a90] [c000000000682138] .of_find_node_by_path+0x1b8/0x20c [c000000012a77b40] [c000000000051840] .ofdt_write+0x308/0x688 [c000000012a77c20] [c000000000238430] .proc_reg_write+0xb8/0xd4 [c000000012a77cd0] [c0000000001cbeac] .vfs_write+0xec/0x1f8 [c000000012a77d70] [c0000000001cc3b0] .SyS_write+0x58/0xa0 [c000000012a77e30] [c00000000000a064] syscall_exit+0x0/0x98 Signed-off-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Aneesh Kumar K.V authored
commit 85c1fafd upstream. On ppc64 we support 4K hash pte with 64K page size. That requires us to track the hash pte slot information on a per 4k basis. We do that by storing the slot details in the second half of pte page. The pte bit _PAGE_COMBO is used to indicate whether the second half need to be looked while building real_pte. We need to use read memory barrier while doing that so that load of hidx is not reordered w.r.t _PAGE_COMBO check. On the store side we already do a lwsync in __hash_page_4K Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
-
Andrey Utkin authored
commit b00fc6ec upstream. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=81631Reported-by:
David Binderman <dcb314@hotmail.com> Signed-off-by:
Andrey Utkin <andrey.krieger.utkin@gmail.com> Signed-off-by:
-
