- 12 May, 2022 1 commit
-
-
Itay Iellin authored
Set a size limit of 8 bytes of the written buffer to "hdev->name" including the terminating null byte, as the size of "hdev->name" is 8 bytes. If an id value which is greater than 9999 is allocated, then the "snprintf(hdev->name, sizeof(hdev->name), "hci%d", id)" function call would lead to a truncation of the id value in decimal notation. Set an explicit maximum id parameter in the id allocation function call. The id allocation function defines the maximum allocated id value as the maximum id parameter value minus one. Therefore, HCI_MAX_ID is defined as 10000. Signed-off-by:
Itay Iellin <ieitayie@gmail.com> Signed-off-by:
Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
- 11 May, 2022 12 commits
-
-
Xiaomeng Tong authored
The bug is here: ret = i40e_add_macvlan_filter(hw, ch->seid, vdev->dev_addr, &aq_err); The list iterator 'ch' will point to a bogus position containing HEAD if the list is empty or no element is found. This case must be checked before any use of the iterator, otherwise it will lead to a invalid memory access. To fix this bug, use a new variable 'iter' as the list iterator, while use the origin variable 'ch' as a dedicated pointer to point to the found element. Cc: stable@vger.kernel.org Fixes: 1d8d80b4 ("i40e: Add macvlan support on i40e") Signed-off-by:
Xiaomeng Tong <xiam0nd.tong@gmail.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220510204846.2166999-1-anthony.l.nguyen@intel.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Paolo Abeni authored
Currently pedit tries to ensure that the accessed skb offset is writable via skb_unclone(). The action potentially allows touching any skb bytes, so it may end-up modifying shared data. The above causes some sporadic MPTCP self-test failures, due to this code: tc -n $ns2 filter add dev ns2eth$i egress \ protocol ip prio 1000 \ handle 42 fw \ action pedit munge offset 148 u8 invert \ pipe csum tcp \ index 100 The above modifies a data byte outside the skb head and the skb is a cloned one, carrying a TCP output packet. This change addresses the issue by keeping track of a rough over-estimate highest skb offset accessed by the action and ensuring such offset is really writable. Note that this may cause performance regressions in some scenarios, but hopefully pedit is not in the critical path. Fixes: db2c2417 ("act_pedit: access skb->data safely") Acked-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Tested-by:
Geliang Tang <geliang.tang@suse.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Link: https://lore.kernel.org/r/1fcf78e6679d0a287dd61bb0f04730ce33b3255d.1652194627.git.pabeni@redhat.comSigned-off-by:
-
David S. Miller authored
Alexandra Winter says: ==================== s390/net: Cleanup some code checker findings clean up smatch findings in legacy code. I was not able to provoke any real failures on my systems, but other hardware reactions, timing conditions or compiler output, may cause failures. There are still 2 smatch warnings left in s390/net: drivers/s390/net/ctcm_main.c:1326 add_channel() warn: missing error code 'rc' This one is a false positive. drivers/s390/net/netiucv.c:1355 netiucv_check_user() warn: argument 3 to %02x specifier has type 'char' Postponing this one, need to better understand string handling in iucv. There are several sparse warnings left in ctcm, like: drivers/s390/net/ctcm_fsms.c:573:9: warning: context imbalance in 'ctcm_chx_setmode' - different lock contexts for basic block Those are mentioned in the source, no plan to rework. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Alexandra Winter authored
smatch complains about drivers/s390/net/lcs.c:1741 lcs_get_control() warn: variable dereferenced before check 'card->dev' (see line 1739) Fixes: 27eb5ac8 ("[PATCH] s390: lcs driver bug fixes and improvements [1/2]") Signed-off-by:
Alexandra Winter <wintera@linux.ibm.com> Signed-off-by:
-
Alexandra Winter authored
smatch complains about drivers/s390/net/ctcm_mpc.c:1210 ctcmpc_unpack_skb() warn: possible memory leak of 'mpcginfo' mpc_action_discontact() did not free mpcginfo. Consolidate the freeing in ctcmpc_unpack_skb(). Fixes: 293d984f ("ctcm: infrastructure for replaced ctc driver") Signed-off-by:
-
Alexandra Winter authored
Found by cppcheck and smatch. smatch complains about drivers/s390/net/ctcm_sysfs.c:43 ctcm_buffer_write() warn: variable dereferenced before check 'priv' (see line 42) Fixes: 3c09e264 ("ctcm: rename READ/WRITE defines to avoid redefinitions") Reported-by:
Colin Ian King <colin.i.king@gmail.com> Signed-off-by:
-
David S. Miller authored
Grant Grundler says: ==================== net: atlantic: more fuzzing fixes It essentially describes four problems: 1) validate rxd_wb->next_desc_ptr before populating buff->next 2) "frag[0] not initialized" case in aq_ring_rx_clean() 3) limit iterations handling fragments in aq_ring_rx_clean() 4) validate hw_head_ in hw_atl_b0_hw_ring_tx_head_update() (1) was fixed by Zekun Shen <bruceshenzk@gmail.com> around the same time with "atlantic: Fix buff_ring OOB in aq_ring_rx_clean" (SHA1 5f501532). I've added one "clean up" contribution: "net: atlantic: reduce scope of is_rsc_complete" I tested the "original" patches using chromeos-v5.4 kernel branch: https://chromium-review.googlesource.com/q/hashtag:pcinet-atlantic-2022q1+(status:open%20OR%20status:merged) I've forward ported those patches to 5.18-rc2 and compiled them but am unable to test them on 5.18-rc2 kernel (logistics problems). Credit largely goes to ChromeOS Fuzzing team members: Aashay Shringarpure, Yi Chou, Shervin Oloumi V2 changes: o drop first patch - was already fixed upstream differently o reduce (4) "validate hw_head_" to simple bounds checking. ==================== Signed-off-by:
-
Grant Grundler authored
Bounds check hw_head index provided by NIC to verify it lies within the TX buffer ring. Reported-by:
Aashay Shringarpure <aashay@google.com> Reported-by:
Yi Chou <yich@google.com> Reported-by:
Shervin Oloumi <enlightened@google.com> Signed-off-by:
Grant Grundler <grundler@chromium.org> Signed-off-by:
-
Grant Grundler authored
Enforce that the CPU can not get stuck in an infinite loop. Reported-by:
-
Grant Grundler authored
Don't defer handling the err case outside the loop. That's pointless. And since is_rsc_complete is only used inside this loop, declare it inside the loop to reduce it's scope. Signed-off-by:
-
Grant Grundler authored
In aq_ring_rx_clean(), if buff->is_eop is not set AND buff->len < AQ_CFG_RX_HDR_SIZE, then hdr_len remains equal to buff->len and skb_add_rx_frag(xxx, *0*, ...) is not called. The loop following this code starts calling skb_add_rx_frag() starting with i=1 and thus frag[0] is never initialized. Since i is initialized to zero at the top of the primary loop, we can just reference and post-increment i instead of hardcoding the 0 when calling skb_add_rx_frag() the first time. Reported-by:
-
Yang Yingliang authored
Switch to using pcim_enable_device() to avoid missing pci_disable_device(). Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220510031316.1780409-1-yangyingliang@huawei.comSigned-off-by:
-
- 10 May, 2022 9 commits
-
-
Wan Jiabing authored
In lanphy_read_page_reg, calling __phy_read() might return a negative error code. Use 'int' to check the error code. Fixes: 7c2dcfa2 ("net: phy: micrel: Add support for LAN8804 PHY") Signed-off-by:
Wan Jiabing <wanjiabing@vivo.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220509144519.2343399-1-wanjiabing@vivo.comSigned-off-by:
-
Kees Cook authored
Clang's structure layout randomization feature gets upset when it sees struct neighbor (which is randomized) cast to struct dn_neigh: net/decnet/dn_route.c:1123:15: error: casting from randomized structure pointer type 'struct neighbour *' to 'struct dn_neigh *' gateway = ((struct dn_neigh *)neigh)->addr; ^ Update all the open-coded casts to use container_of() to do the conversion instead of depending on strict member ordering. Reported-by:
kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/lkml/202205041247.WKBEHGS5-lkp@intel.com Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Yajun Deng <yajun.deng@linux.dev> Cc: Zheng Yongjun <zhengyongjun3@huawei.com> Cc: Bill Wendling <morbo@google.com> Cc: linux-decnet-user@lists.sourceforge.net Cc: netdev@vger.kernel.org Signed-off-by:
Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220508102217.2647184-1-keescook@chromium.orgSigned-off-by:
-
Manuel Ullmann authored
The impact of this regression is the same for resume that I saw on thaw: the kernel hangs and nothing except SysRq rebooting can be done. Fixes regression in commit cbe6c3a8 ("net: atlantic: invert deep par in pm functions, preventing null derefs"), where I disabled deep pm resets in suspend and resume, trying to make sense of the atl_resume_common() deep parameter in the first place. It turns out, that atlantic always has to deep reset on pm operations. Even though I expected that and tested resume, I screwed up by kexec-rebooting into an unpatched kernel, thus missing the breakage. This fixup obsoletes the deep parameter of atl_resume_common, but I leave the cleanup for the maintainers to post to mainline. Suspend and hibernation were successfully tested by the reporters. Fixes: cbe6c3a8 ("net: atlantic: invert deep par in pm functions, preventing null derefs") Link: https://lore.kernel.org/regressions/9-Ehc_xXSwdXcvZqKD5aSqsqeNj5Izco4MYEwnx5cySXVEc9-x_WC4C3kAoCqNTi-H38frroUK17iobNVnkLtW36V6VWGSQEOHXhmVMm5iQ=@protonmail.com/Reported-by:
Jordan Leppert <jordanleppert@protonmail.com> Reported-by:
Holger Hoffstaette <holger@applied-asynchrony.com> Tested-by:
Manuel Ullmann <labre@posteo.de> Link: https://lore.kernel.org/r/87bkw8dfmp.fsf@posteo.deSigned-off-by:
-
git://git.open-mesh.org/linux-mergeJakub Kicinski authored
Simon Wunderlich says: ==================== Here is a batman-adv bugfix: - Don't skb_split skbuffs with frag_list, by Sven Eckelmann * tag 'batadv-net-pullrequest-20220508' of git://git.open-mesh.org/linux-merge: batman-adv: Don't skb_split skbuffs with frag_list ==================== Link: https://lore.kernel.org/r/20220508132110.20451-1-sw@simonwunderlich.deSigned-off-by:
-
Vladimir Oltean authored
There is a race between switchdev_bridge_port_offload() and the dsa_port_switchdev_sync_attrs() call right below it. When switchdev_bridge_port_offload() finishes, FDB entries have been replayed by the bridge, but are scheduled for deferred execution later. However dsa_port_switchdev_sync_attrs -> dsa_port_can_apply_vlan_filtering() may impose restrictions on the vlan_filtering attribute and refuse offloading. When this happens, the delayed FDB entries will dereference dp->bridge, which is a NULL pointer because we have stopped the process of offloading this bridge. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Workqueue: dsa_ordered dsa_slave_switchdev_event_work pc : dsa_port_bridge_host_fdb_del+0x64/0x100 lr : dsa_slave_switchdev_event_work+0x130/0x1bc Call trace: dsa_port_bridge_host_fdb_del+0x64/0x100 dsa_slave_switchdev_event_work+0x130/0x1bc process_one_work+0x294/0x670 worker_thread+0x80/0x460 ---[ end trace 0000000000000000 ]--- Error: dsa_core: Must first remove VLAN uppers having VIDs also present in bridge. Fix the bug by doing what we do on the normal bridge leave path as well, which is to wait until the deferred FDB entries complete executing, then exit. The placement of dsa_flush_workqueue() after switchdev_bridge_port_unoffload() guarantees that both the FDB additions and deletions on rollback are waited for. Fixes: d7d0d423 ("net: dsa: flush switchdev workqueue when leaving the bridge") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20220507134550.1849834-1-vladimir.oltean@nxp.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-05-06 This series contains updates to ice driver only. Ivan Vecera fixes a race with aux plug/unplug by delaying setting adev until initialization is complete and adding locking. Anatolii ensures VF queues are completely disabled before attempting to reconfigure them. Michal ensures stale Tx timestamps are cleared from hardware. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: fix PTP stale Tx timestamps cleanup ice: clear stale Tx queue settings before configuring ice: Fix race during aux device (un)plugging ==================== Link: https://lore.kernel.org/r/20220506174129.4976-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Francesco Dolcini authored
This fixes the following error caused by a race condition between phydev->adjust_link() and a MDIO transaction in the phy interrupt handler. The issue was reproduced with the ethernet FEC driver and a micrel KSZ9031 phy. [ 146.195696] fec 2188000.ethernet eth0: MDIO read timeout [ 146.201779] ------------[ cut here ]------------ [ 146.206671] WARNING: CPU: 0 PID: 571 at drivers/net/phy/phy.c:942 phy_error+0x24/0x6c [ 146.214744] Modules linked in: bnep imx_vdoa imx_sdma evbug [ 146.220640] CPU: 0 PID: 571 Comm: irq/128-2188000 Not tainted 5.18.0-rc3-00080-gd569e869 #9 [ 146.229563] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [ 146.236257] unwind_backtrace from show_stack+0x10/0x14 [ 146.241640] show_stack from dump_stack_lvl+0x58/0x70 [ 146.246841] dump_stack_lvl from __warn+0xb4/0x24c [ 146.251772] __warn from warn_slowpath_fmt+0x5c/0xd4 [ 146.256873] warn_slowpath_fmt from phy_error+0x24/0x6c [ 146.262249] phy_error from kszphy_handle_interrupt+0x40/0x48 [ 146.268159] kszphy_handle_interrupt from irq_thread_fn+0x1c/0x78 [ 146.274417] irq_thread_fn from irq_thread+0xf0/0x1dc [ 146.279605] irq_thread from kthread+0xe4/0x104 [ 146.284267] kthread from ret_from_fork+0x14/0x28 [ 146.289164] Exception stack(0xe6fa1fb0 to 0xe6fa1ff8) [ 146.294448] 1fa0: 00000000 00000000 00000000 00000000 [ 146.302842] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 146.311281] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 146.318262] irq event stamp: 12325 [ 146.321780] hardirqs last enabled at (12333): [<c01984c4>] __up_console_sem+0x50/0x60 [ 146.330013] hardirqs last disabled at (12342): [<c01984b0>] __up_console_sem+0x3c/0x60 [ 146.338259] softirqs last enabled at (12324): [<c01017f0>] __do_softirq+0x2c0/0x624 [ 146.346311] softirqs last disabled at (12319): [<c01300ac>] __irq_exit_rcu+0x138/0x178 [ 146.354447] ---[ end trace 0000000000000000 ]--- With the FEC driver phydev->adjust_link() calls fec_enet_adjust_link() calls fec_stop()/fec_restart() and both these function reset and temporary disable the FEC disrupting any MII transaction that could be happening at the same time. fec_enet_adjust_link() and phy_read() can be running at the same time when we have one additional interrupt before the phy_state_machine() is able to terminate. Thread 1 (phylib WQ) | Thread 2 (phy interrupt) | | phy_interrupt() <-- PHY IRQ | handle_interrupt() | phy_read() | phy_trigger_machine() | --> schedule phylib WQ | | phy_state_machine() | phy_check_link_status() | phy_link_change() | phydev->adjust_link() | fec_enet_adjust_link() | --> FEC reset | phy_interrupt() <-- PHY IRQ | phy_read() | Fix this by acquiring the phydev lock in phy_interrupt(). Link: https://lore.kernel.org/all/20220422152612.GA510015@francesco-nb.int.toradex.com/ Fixes: c974bdbc ("net: phy: Use threaded IRQ, to allow IRQ from sleeping devices") cc: <stable@vger.kernel.org> Signed-off-by:
Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by:
-
Jesse Brandeburg authored
The W=2 build pointed out that the code wasn't initializing all the variables in the dim_cq_moder declarations with the struct initializers. The net change here is zero since these structs were already static const globals and were initialized with zeros by the compiler, but removing compiler warnings has value in and of itself. lib/dim/net_dim.c: At top level: lib/dim/net_dim.c:54:9: warning: missing initializer for field ‘comps’ of ‘const struct dim_cq_moder’ [-Wmissing-field-initializers] 54 | NET_DIM_RX_EQE_PROFILES, | ^~~~~~~~~~~~~~~~~~~~~~~ In file included from lib/dim/net_dim.c:6: ./include/linux/dim.h:45:13: note: ‘comps’ declared here 45 | u16 comps; | ^~~~~ and repeats for the tx struct, and once you fix the comps entry then the cq_period_mode field needs the same treatment. Use the commonly accepted style to indicate to the compiler that we know what we're doing, and add a comma at the end of each struct initializer to clean up the issue, and use explicit initializers for the fields we are initializing which makes the compiler happy. While here and fixing these lines, clean up the code slightly with a fix for the super long lines by removing the word "_MODERATION" from a couple defines only used in this file. Fixes: f8be17b8 ("lib/dim: Fix -Wunused-const-variable warnings") Signed-off-by:Jesse Brandeburg <jesse.brandeburg@intel.com> Link: https://lore.kernel.org/r/20220507011038.14568-1-jesse.brandeburg@intel.comSigned-off-by:
-
Jonathan Lemon authored
The initial code used roundup() to round the starting time to a multiple of a period. This generated an error on 32-bit systems, so was replaced with DIV_ROUND_UP_ULL(). However, this truncates to 32-bits on a 64-bit system. Replace with DIV64_U64_ROUND_UP() instead. Fixes: b325af3c ("ptp: ocp: Add signal generators and update sysfs nodes") Signed-off-by:
Jonathan Lemon <jonathan.lemon@gmail.com> Link: https://lore.kernel.org/r/20220506223739.1930-2-jonathan.lemon@gmail.comSigned-off-by:
-
- 09 May, 2022 5 commits
-
-
Yang Yingliang authored
Fix the missing pci_disable_device() before return from tulip_init_one() in the error handling case. Reported-by:
-
Yang Yingliang authored
If ionic_map_bars() fails, pci_release_regions() need be called. Fixes: fbfb8031 ("ionic: Add hardware init and device commands") Signed-off-by:
-
Lina Wang authored
When NET_F_F_GRO_FRAGLIST is enabled and bpf_skb_change_proto is used, check if udp packets and tcp packets are successfully delivered to user space. If wrong udp packets are delivered, udpgso_bench_rx will exit with "Initial byte out of range" Signed-off-by:
Maciej enczykowski <maze@google.com> Signed-off-by:
Lina Wang <lina.wang@mediatek.com> Signed-off-by:
-
Lina Wang authored
When clatd starts with ebpf offloaing, and NETIF_F_GRO_FRAGLIST is enable, several skbs are gathered in skb_shinfo(skb)->frag_list. The first skb's ipv6 header will be changed to ipv4 after bpf_skb_proto_6_to_4, network_header\transport_header\mac_header have been updated as ipv4 acts, but other skbs in frag_list didnot update anything, just ipv6 packets. udp_queue_rcv_skb will call skb_segment_list to traverse other skbs in frag_list and make sure right udp payload is delivered to user space. Unfortunately, other skbs in frag_list who are still ipv6 packets are updated like the first skb and will have wrong transport header length. e.g.before bpf_skb_proto_6_to_4,the first skb and other skbs in frag_list has the same network_header(24)& transport_header(64), after bpf_skb_proto_6_to_4, ipv6 protocol has been changed to ipv4, the first skb's network_header is 44,transport_header is 64, other skbs in frag_list didnot change.After skb_segment_list, the other skbs in frag_list has different network_header(24) and transport_header(44), so there will be 20 bytes different from original,that is difference between ipv6 header and ipv4 header. Just change transport_header to be the same with original. Actually, there are two solutions to fix it, one is traversing all skbs and changing every skb header in bpf_skb_proto_6_to_4, the other is modifying frag_list skb's header in skb_segment_list. Considering efficiency, adopt the second one--- when the first skb and other skbs in frag_list has different network_header length, restore them to make sure right udp payload is delivered to user space. Signed-off-by:
-
Taehee Yoo authored
It fixes memory leak in ring buffer change logic. When ring buffer size is changed(ethtool -G eth0 rx 4096), sfc driver works like below. 1. stop all channels and remove ring buffers. 2. allocates new buffer array. 3. allocates rx buffers. 4. start channels. While the above steps are working, it skips some steps if the channel doesn't have a ->copy callback function. Due to ptp channel doesn't have ->copy callback, these above steps are skipped for ptp channel. It eventually makes some problems. a. ptp channel's ring buffer size is not changed, it works only 1024(default). b. memory leak. The reason for memory leak is to use the wrong ring buffer values. There are some values, which is related to ring buffer size. a. efx->rxq_entries - This is global value of rx queue size. b. rx_queue->ptr_mask - used for access ring buffer as circular ring. - roundup_pow_of_two(efx->rxq_entries) - 1 c. rx_queue->max_fill - efx->rxq_entries - EFX_RXD_HEAD_ROOM These all values should be based on ring buffer size consistently. But ptp channel's values are not. a. efx->rxq_entries - This is global(for sfc) value, always new ring buffer size. b. rx_queue->ptr_mask - This is always 1023(default). c. rx_queue->max_fill - This is new ring buffer size - EFX_RXD_HEAD_ROOM. Let's assume we set 4096 for rx ring buffer, normal channel ptp channel efx->rxq_entries 4096 4096 rx_queue->ptr_mask 4095 1023 rx_queue->max_fill 4086 4086 sfc driver allocates rx ring buffers based on these values. When it allocates ptp channel's ring buffer, 4086 ring buffers are allocated then, these buffers are attached to the allocated array. But ptp channel's ring buffer array size is still 1024(default) and ptr_mask is still 1023 too. So, 3062 ring buffers will be overwritten to the array. This is the reason for memory leak. Test commands: ethtool -G <interface name> rx 4096 while : do ip link set <interface name> up ip link set <interface name> down done In order to avoid this problem, it adds ->copy callback to ptp channel type. So that rx_queue->ptr_mask value will be updated correctly. Fixes: 7c236c43 ("sfc: Add support for IEEE-1588 PTP") Signed-off-by:Taehee Yoo <ap420073@gmail.com> Signed-off-by:
-
- 06 May, 2022 13 commits
-
-
Kees Cook authored
Using min_t(int, ...) as a potential array index implies to the compiler that negative offsets should be allowed. This is not the case, though. Replace "int" with "unsigned int". Fixes the following warning exposed under future CONFIG_FORTIFY_SOURCE improvements: In file included from include/linux/string.h:253, from include/linux/bitmap.h:11, from include/linux/cpumask.h:12, from include/linux/smp.h:13, from include/linux/lockdep.h:14, from include/linux/rcupdate.h:29, from include/linux/rculist.h:11, from include/linux/pid.h:5, from include/linux/sched.h:14, from include/linux/delay.h:23, from drivers/net/ethernet/chelsio/cxgb4/t4_hw.c:35: drivers/net/ethernet/chelsio/cxgb4/t4_hw.c: In function 't4_get_raw_vpd_params': include/linux/fortify-string.h:46:33: warning: '__builtin_memcpy' pointer overflow between offset 29 and size [2147483648, 4294967295] [-Warray-bounds] 46 | #define __underlying_memcpy __builtin_memcpy | ^ include/linux/fortify-string.h:388:9: note: in expansion of macro '__underlying_memcpy' 388 | __underlying_##op(p, q, __fortify_size); \ | ^~~~~~~~~~~~~ include/linux/fortify-string.h:433:26: note: in expansion of macro '__fortify_memcpy_chk' 433 | #define memcpy(p, q, s) __fortify_memcpy_chk(p, q, s, \ | ^~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/chelsio/cxgb4/t4_hw.c:2796:9: note: in expansion of macro 'memcpy' 2796 | memcpy(p->id, vpd + id, min_t(int, id_len, ID_LEN)); | ^~~~~~ include/linux/fortify-string.h:46:33: warning: '__builtin_memcpy' pointer overflow between offset 0 and size [2147483648, 4294967295] [-Warray-bounds] 46 | #define __underlying_memcpy __builtin_memcpy | ^ include/linux/fortify-string.h:388:9: note: in expansion of macro '__underlying_memcpy' 388 | __underlying_##op(p, q, __fortify_size); \ | ^~~~~~~~~~~~~ include/linux/fortify-string.h:433:26: note: in expansion of macro '__fortify_memcpy_chk' 433 | #define memcpy(p, q, s) __fortify_memcpy_chk(p, q, s, \ | ^~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/chelsio/cxgb4/t4_hw.c:2798:9: note: in expansion of macro 'memcpy' 2798 | memcpy(p->sn, vpd + sn, min_t(int, sn_len, SERNUM_LEN)); | ^~~~~~ Additionally remove needless cast from u8[] to char * in last strim() call. Reported-by: -
Eric Dumazet authored
netlink_recvmsg() does not need to change transport header. If transport header was needed, it should have been reset by the producer (netlink_dump()), not the consumer(s). The following trace probably happened when multiple threads were using MSG_PEEK. BUG: KCSAN: data-race in netlink_recvmsg / netlink_recvmsg write to 0xffff88811e9f15b2 of 2 bytes by task 32012 on cpu 1: skb_reset_transport_header include/linux/skbuff.h:2760 [inline] netlink_recvmsg+0x1de/0x790 net/netlink/af_netlink.c:1978 sock_recvmsg_nosec net/socket.c:948 [inline] sock_recvmsg net/socket.c:966 [inline] __sys_recvfrom+0x204/0x2c0 net/socket.c:2097 __do_sys_recvfrom net/socket.c:2115 [inline] __se_sys_recvfrom net/socket.c:2111 [inline] __x64_sys_recvfrom+0x74/0x90 net/socket.c:2111 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae write to 0xffff88811e9f15b2 of 2 bytes by task 32005 on cpu 0: skb_reset_transport_header include/linux/skbuff.h:2760 [inline] netlink_recvmsg+0x1de/0x790 net/netlink/af_netlink.c:1978 ____sys_recvmsg+0x162/0x2f0 ___sys_recvmsg net/socket.c:2674 [inline] __sys_recvmsg+0x209/0x3f0 net/socket.c:2704 __do_sys_recvmsg net/socket.c:2714 [inline] __se_sys_recvmsg net/socket.c:2711 [inline] __x64_sys_recvmsg+0x42/0x50 net/socket.c:2711 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0xffff -> 0x0000 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 32005 Comm: syz-executor.4 Not tainted 5.18.0-rc1-syzkaller-00328-ge1f700eb-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Link: https://lore.kernel.org/r/20220505161946.2867638-1-eric.dumazet@gmail.comSigned-off-by:
-
Lokesh Dhoundiyal authored
kmemleak reports the following when routing multicast traffic over an ipsec tunnel. Kmemleak output: unreferenced object 0x8000000044bebb00 (size 256): comm "softirq", pid 0, jiffies 4294985356 (age 126.810s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 80 00 00 00 05 13 74 80 ..............t. 80 00 00 00 04 9b bf f9 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000f83947e0>] __kmalloc+0x1e8/0x300 [<00000000b7ed8dca>] metadata_dst_alloc+0x24/0x58 [<0000000081d32c20>] __ipgre_rcv+0x100/0x2b8 [<00000000824f6cf1>] gre_rcv+0x178/0x540 [<00000000ccd4e162>] gre_rcv+0x7c/0xd8 [<00000000c024b148>] ip_protocol_deliver_rcu+0x124/0x350 [<000000006a483377>] ip_local_deliver_finish+0x54/0x68 [<00000000d9271b3a>] ip_local_deliver+0x128/0x168 [<00000000bd4968ae>] xfrm_trans_reinject+0xb8/0xf8 [<0000000071672a19>] tasklet_action_common.isra.16+0xc4/0x1b0 [<0000000062e9c336>] __do_softirq+0x1fc/0x3e0 [<00000000013d7914>] irq_exit+0xc4/0xe0 [<00000000a4d73e90>] plat_irq_dispatch+0x7c/0x108 [<000000000751eb8e>] handle_int+0x16c/0x178 [<000000001668023b>] _raw_spin_unlock_irqrestore+0x1c/0x28 The metadata dst is leaked when ip_route_input_mc() updates the dst for the skb. Commit f38a9eb1 ("dst: Metadata destinations") correctly handled dropping the dst in ip_route_input_slow() but missed the multicast case which is handled by ip_route_input_mc(). Drop the dst in ip_route_input_mc() avoiding the leak. Fixes: f38a9eb1 ("dst: Metadata destinations") Signed-off-by:Lokesh Dhoundiyal <lokesh.dhoundiyal@alliedtelesis.co.nz> Signed-off-by:
Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by:
David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20220505020017.3111846-1-chris.packham@alliedtelesis.co.nzSigned-off-by:
-
Michal Michalik authored
Read stale PTP Tx timestamps from PHY on cleanup. After running out of Tx timestamps request handlers, hardware (HW) stops reporting finished requests. Function ice_ptp_tx_tstamp_cleanup() used to only clean up stale handlers in driver and was leaving the hardware registers not read. Not reading stale PTP Tx timestamps prevents next interrupts from arriving and makes timestamping unusable. Fixes: ea9b847c ("ice: enable transmit timestamps for E810 devices") Signed-off-by:
Michal Michalik <michal.michalik@intel.com> Reviewed-by:
Jacob Keller <jacob.e.keller@intel.com> Reviewed-by:
Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by:
-
Anatolii Gerasymenko authored
The iAVF driver uses 3 virtchnl op codes to communicate with the PF regarding the VF Tx queues: * VIRTCHNL_OP_CONFIG_VSI_QUEUES configures the hardware and firmware logic for the Tx queues * VIRTCHNL_OP_ENABLE_QUEUES configures the queue interrupts * VIRTCHNL_OP_DISABLE_QUEUES disables the queue interrupts and Tx rings. There is a bug in the iAVF driver due to the race condition between VF reset request and shutdown being executed in parallel. This leads to a break in logic and VIRTCHNL_OP_DISABLE_QUEUES is not being sent. If this occurs, the PF driver never cleans up the Tx queues. This results in leaving behind stale Tx queue settings in the hardware and firmware. The most obvious outcome is that upon the next VIRTCHNL_OP_CONFIG_VSI_QUEUES, the PF will fail to program the Tx scheduler node due to a lack of space. We need to protect ICE driver against such situation. To fix this, make sure we clear existing stale settings out when handling VIRTCHNL_OP_CONFIG_VSI_QUEUES. This ensures we remove the previous settings. Calling ice_vf_vsi_dis_single_txq should be safe as it will do nothing if the queue is not configured. The function already handles the case when the Tx queue is not currently configured and exits with a 0 return in that case. Fixes: 7ad15440 ("ice: Refactor VIRTCHNL_OP_CONFIG_VSI_QUEUES handling") Signed-off-by:
Anatolii Gerasymenko <anatolii.gerasymenko@intel.com> Tested-by:
Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by:
-
Ivan Vecera authored
Function ice_plug_aux_dev() assigns pf->adev field too early prior aux device initialization and on other side ice_unplug_aux_dev() starts aux device deinit and at the end assigns NULL to pf->adev. This is wrong because pf->adev should always be non-NULL only when aux device is fully initialized and ready. This wrong order causes a crash when ice_send_event_to_aux() call occurs because that function depends on non-NULL value of pf->adev and does not assume that aux device is half-initialized or half-destroyed. After order correction the race window is tiny but it is still there, as Leon mentioned and manipulation with pf->adev needs to be protected by mutex. Fix (un-)plugging functions so pf->adev field is set after aux device init and prior aux device destroy and protect pf->adev assignment by new mutex. This mutex is also held during ice_send_event_to_aux() call to ensure that aux device is valid during that call. Note that device lock used ice_send_event_to_aux() needs to be kept to avoid race with aux drv unload. Reproducer: cycle=1 while :;do echo "#### Cycle: $cycle" ip link set ens7f0 mtu 9000 ip link add bond0 type bond mode 1 miimon 100 ip link set bond0 up ifenslave bond0 ens7f0 ip link set bond0 mtu 9000 ethtool -L ens7f0 combined 1 ip link del bond0 ip link set ens7f0 mtu 1500 sleep 1 let cycle++ done In short when the device is added/removed to/from bond the aux device is unplugged/plugged. When MTU of the device is changed an event is sent to aux device asynchronously. This can race with (un)plugging operation and because pf->adev is set too early (plug) or too late (unplug) the function ice_send_event_to_aux() can touch uninitialized or destroyed fields. In the case of crash below pf->adev->dev.mutex. Crash: [ 53.372066] bond0: (slave ens7f0): making interface the new active one [ 53.378622] bond0: (slave ens7f0): Enslaving as an active interface with an u p link [ 53.386294] IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready [ 53.549104] bond0: (slave ens7f1): Enslaving as a backup interface with an up link [ 54.118906] ice 0000:ca:00.0 ens7f0: Number of in use tx queues changed inval idating tc mappings. Priority traffic classification disabled! [ 54.233374] ice 0000:ca:00.1 ens7f1: Number of in use tx queues changed inval idating tc mappings. Priority traffic classification disabled! [ 54.248204] bond0: (slave ens7f0): Releasing backup interface [ 54.253955] bond0: (slave ens7f1): making interface the new active one [ 54.274875] bond0: (slave ens7f1): Releasing backup interface [ 54.289153] bond0 (unregistering): Released all slaves [ 55.383179] MII link monitoring set to 100 ms [ 55.398696] bond0: (slave ens7f0): making interface the new active one [ 55.405241] BUG: kernel NULL pointer dereference, address: 0000000000000080 [ 55.405289] bond0: (slave ens7f0): Enslaving as an active interface with an u p link [ 55.412198] #PF: supervisor write access in kernel mode [ 55.412200] #PF: error_code(0x0002) - not-present page [ 55.412201] PGD 25d2ad067 P4D 0 [ 55.412204] Oops: 0002 [#1] PREEMPT SMP NOPTI [ 55.412207] CPU: 0 PID: 403 Comm: kworker/0:2 Kdump: loaded Tainted: G S 5.17.0-13579-g57f2d6540f03 #1 [ 55.429094] bond0: (slave ens7f1): Enslaving as a backup interface with an up link [ 55.430224] Hardware name: Dell Inc. PowerEdge R750/06V45N, BIOS 1.4.4 10/07/ 2021 [ 55.430226] Workqueue: ice ice_service_task [ice] [ 55.468169] RIP: 0010:mutex_unlock+0x10/0x20 [ 55.472439] Code: 0f b1 13 74 96 eb e0 4c 89 ee eb d8 e8 79 54 ff ff 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 65 48 8b 04 25 40 ef 01 00 31 d2 <f0> 48 0f b1 17 75 01 c3 e9 e3 fe ff ff 0f 1f 00 0f 1f 44 00 00 48 [ 55.491186] RSP: 0018:ff4454230d7d7e28 EFLAGS: 00010246 [ 55.496413] RAX: ff1a79b208b08000 RBX: ff1a79b2182e8880 RCX: 0000000000000001 [ 55.503545] RDX: 0000000000000000 RSI: ff4454230d7d7db0 RDI: 0000000000000080 [ 55.510678] RBP: ff1a79d1c7e48b68 R08: ff4454230d7d7db0 R09: 0000000000000041 [ 55.517812] R10: 00000000000000a5 R11: 00000000000006e6 R12: ff1a79d1c7e48bc0 [ 55.524945] R13: 0000000000000000 R14: ff1a79d0ffc305c0 R15: 0000000000000000 [ 55.532076] FS: 0000000000000000(0000) GS:ff1a79d0ffc00000(0000) knlGS:0000000000000000 [ 55.540163] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 55.545908] CR2: 0000000000000080 CR3: 00000003487ae003 CR4: 0000000000771ef0 [ 55.553041] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 55.560173] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 55.567305] PKRU: 55555554 [ 55.570018] Call Trace: [ 55.572474] <TASK> [ 55.574579] ice_service_task+0xaab/0xef0 [ice] [ 55.579130] process_one_work+0x1c5/0x390 [ 55.583141] ? process_one_work+0x390/0x390 [ 55.587326] worker_thread+0x30/0x360 [ 55.590994] ? process_one_work+0x390/0x390 [ 55.595180] kthread+0xe6/0x110 [ 55.598325] ? kthread_complete_and_exit+0x20/0x20 [ 55.603116] ret_from_fork+0x1f/0x30 [ 55.606698] </TASK> Fixes: f9f5301e ("ice: Register auxiliary device to provide RDMA") Reviewed-by:Leon Romanovsky <leonro@nvidia.com> Signed-off-by:
Ivan Vecera <ivecera@redhat.com> Reviewed-by:
Dave Ertman <david.m.ertman@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by:
-
Jakub Kicinski authored
Vladimir Oltean says: ==================== Ocelot VCAP fixes Changes in v2: fix the NPDs and UAFs caused by filter->trap_list in a more robust way that actually does not introduce bugs of its own (1/5) This series fixes issues found while running tools/testing/selftests/net/forwarding/tc_actions.sh on the ocelot switch: - NULL pointer dereference when failing to offload a filter - NULL pointer dereference after deleting a trap - filters still having effect after being deleted - dropped packets still being seen by software - statistics counters showing double the amount of hits - statistics counters showing inexistent hits - invalid configurations not rejected ==================== Link: https://lore.kernel.org/r/20220504235503.4161890-1-vladimir.oltean@nxp.comSigned-off-by:
-
Vladimir Oltean authored
Given the following order of operations: (1) we add filter A using tc-flower (2) we send a packet that matches it (3) we read the filter's statistics to find a hit count of 1 (4) we add a second filter B with a higher preference than A, and A moves one position to the right to make room in the TCAM for it (5) we send another packet, and this matches the second filter B (6) we read the filter statistics again. When this happens, the hit count of filter A is 2 and of filter B is 1, despite a single packet having matched each filter. Furthermore, in an alternate history, reading the filter stats a second time between steps (3) and (4) makes the hit count of filter A remain at 1 after step (6), as expected. The reason why this happens has to do with the filter->stats.pkts field, which is written to hardware through the call path below: vcap_entry_set / | \ / | \ / | \ / | \ es0_entry_set is1_entry_set is2_entry_set \ | / \ | / \ | / vcap_data_set(data.counter, ...) The primary role of filter->stats.pkts is to transport the filter hit counters from the last readout all the way from vcap_entry_get() -> ocelot_vcap_filter_stats_update() -> ocelot_cls_flower_stats(). The reason why vcap_entry_set() writes it to hardware is so that the counters (saturating and having a limited bit width) are cleared after each user space readout. The writing of filter->stats.pkts to hardware during the TCAM entry movement procedure is an unintentional consequence of the code design, because the hit count isn't up to date at this point. So at step (4), when filter A is moved by ocelot_vcap_filter_add() to make room for filter B, the hardware hit count is 0 (no packet matched on it in the meantime), but filter->stats.pkts is 1, because the last readout saw the earlier packet. The movement procedure programs the old hit count back to hardware, so this creates the impression to user space that more packets have been matched than they really were. The bug can be seen when running the gact_drop_and_ok_test() from the tc_actions.sh selftest. Fix the issue by reading back the hit count to tmp->stats.pkts before migrating the VCAP filter. Sure, this is a best-effort technique, since the packets that hit the rule between vcap_entry_get() and vcap_entry_set() won't be counted, but at least it allows the counters to be reliably used for selftests where the traffic is under control. The vcap_entry_get() name is a bit unintuitive, but it only reads back the counter portion of the TCAM entry, not the entire entry. The index from which we retrieve the counter is also a bit unintuitive (i - 1 during add, i + 1 during del), but this is the way in which TCAM entry movement works. The "entry index" isn't a stored integer for a TCAM filter, instead it is dynamically computed by ocelot_vcap_block_get_filter_index() based on the entry's position in the &block->rules list. That position (as well as block->count) is automatically updated by ocelot_vcap_filter_add_to_block() on add, and by ocelot_vcap_block_remove_filter() on del. So "i" is the new filter index, and "i - 1" or "i + 1" respectively are the old addresses of that TCAM entry (we only support installing/deleting one filter at a time). Fixes: b5962294 ("net: mscc: ocelot: Add support for tcam") Signed-off-by: -
Vladimir Oltean authored
Once the CPU port was added to the destination port mask of a packet, it can never be cleared, so even packets marked as dropped by the MASK_MODE of a VCAP IS2 filter will still reach it. This is why we need the OCELOT_POLICER_DISCARD to "kill dropped packets dead" and make software stop seeing them. We disallow policer rules from being put on any other chain than the one for the first lookup, but we don't do this for "drop" rules, although we should. This change is merely ascertaining that the rules dont't (completely) work and letting the user know. The blamed commit is the one that introduced the multi-chain architecture in ocelot. Prior to that, we should have always offloaded the filters to VCAP IS2 lookup 0, where they did work. Fixes: 1397a2eb ("net: mscc: ocelot: create TCAM skeleton from tc filter chains") Signed-off-by:
-
Vladimir Oltean authored
The VCAP IS2 TCAM is looked up twice per packet, and each filter can be configured to only match during the first, second lookup, or both, or none. The blamed commit wrote the code for making VCAP IS2 filters match only on the given lookup. But right below that code, there was another line that explicitly made the lookup a "don't care", and this is overwriting the lookup we've selected. So the code had no effect. Some of the more noticeable effects of having filters match on both lookups: - in "tc -s filter show dev swp0 ingress", we see each packet matching a VCAP IS2 filter counted twice. This throws off scripts such as tools/testing/selftests/net/forwarding/tc_actions.sh and makes them fail. - a "tc-drop" action offloaded to VCAP IS2 needs a policer as well, because once the CPU port becomes a member of the destination port mask of a packet, nothing removes it, not even a PERMIT/DENY mask mode with a port mask of 0. But VCAP IS2 rules with the POLICE_ENA bit in the action vector can only appear in the first lookup. What happens when a filter matches both lookups is that the action vector is combined, and this makes the POLICE_ENA bit ineffective, since the last lookup in which it has appeared is the second one. In other words, "tc-drop" actions do not drop packets for the CPU port, dropped packets are still seen by software unless there was an FDB entry that directed those packets to some other place different from the CPU. The last bit used to work, because in the initial commit b5962294 ("net: mscc: ocelot: Add support for tcam"), we were writing the FIRST field of the VCAP IS2 half key with a 1, not with a "don't care". The change to "don't care" was made inadvertently by me in commit c1c3993e ("net: mscc: ocelot: generalize existing code for VCAP"), which I just realized, and which needs a separate fix from this one, for "stable" kernels that lack the commit blamed below. Fixes: 226e9cd8 ("net: mscc: ocelot: only install TCAM entries into a specific lookup and PAG") Signed-off-by:
-
Vladimir Oltean authored
ocelot_vcap_filter_del() works by moving the next filters over the current one, and then deleting the last filter by calling vcap_entry_set() with a del_filter which was specially created by memsetting its memory to zeroes. vcap_entry_set() then programs this to the TCAM and action RAM via the cache registers. The problem is that vcap_entry_set() is a dispatch function which looks at del_filter->block_id. But since del_filter is zeroized memory, the block_id is 0, or otherwise said, VCAP_ES0. So practically, what we do is delete the entry at the same TCAM index from VCAP ES0 instead of IS1 or IS2. The code was not always like this. vcap_entry_set() used to simply be is2_entry_set(), and then, the logic used to work. Restore the functionality by populating the block_id of the del_filter based on the VCAP block of the filter that we're deleting. This makes vcap_entry_set() know what to do. Fixes: 1397a2eb ("net: mscc: ocelot: create TCAM skeleton from tc filter chains") Signed-off-by:
-
Vladimir Oltean authored
Since the blamed commit, VCAP filters can appear on more than one list. If their action is "trap", they are chained on ocelot->traps via filter->trap_list. This is in addition to their normal placement on the VCAP block->rules list head. Therefore, when we free a VCAP filter, we must remove it from all lists it is a member of, including ocelot->traps. There are at least 2 bugs which are direct consequences of this design decision. First is the incorrect usage of list_empty(), meant to denote whether "filter" is chained into ocelot->traps via filter->trap_list. This does not do the correct thing, because list_empty() checks whether "head->next == head", but in our case, head->next == head->prev == NULL. So we dereference NULL pointers and die when we call list_del(). Second is the fact that not all places that should remove the filter from ocelot->traps do so. One example is ocelot_vcap_block_remove_filter(), which is where we have the main kfree(filter). By keeping freed filters in ocelot->traps we end up in a use-after-free in felix_update_trapping_destinations(). Attempting to fix all the buggy patterns is a whack-a-mole game which makes the driver unmaintainable. Actually this is what the previous patch version attempted to do: https://patchwork.kernel.org/project/netdevbpf/patch/20220503115728.834457-3-vladimir.oltean@nxp.com/ but it introduced another set of bugs, because there are other places in which create VCAP filters, not just ocelot_vcap_filter_create(): - ocelot_trap_add() - felix_tag_8021q_vlan_add_rx() - felix_tag_8021q_vlan_add_tx() Relying on the convention that all those code paths must call INIT_LIST_HEAD(&filter->trap_list) is not going to scale. So let's do what should have been done in the first place and keep a bool in struct ocelot_vcap_filter which denotes whether we are looking at a trapping rule or not. Iterating now happens over the main VCAP IS2 block->rules. The advantage is that we no longer risk having stale references to a freed filter, since it is only present in that list. Fixes: e42bd4ed ("net: mscc: ocelot: keep traps in a list") Signed-off-by:
-
Jonathan Toppins authored
The bonding entry did not include additional include files that have been added nor did it reference the documentation. Add these references for completeness. Signed-off-by:
Jonathan Toppins <jtoppins@redhat.com> Link: https://lore.kernel.org/r/903ed2906b93628b38a2015664a20d2802042863.1651690748.git.jtoppins@redhat.comSigned-off-by:
-
