- 22 Mar, 2012 1 commit
-
-
Konrad Rzeszutek Wilk authored
The CPU hotplug code has now a callback to help bring up the CPU. Without the call we end up getting: BUG: soft lockup - CPU#0 stuck for 29s! [migration/0:6] Modules linked in: CPU ] Pid: 6, comm: migration/0 Not tainted 3.3.0upstream-01180-ged378a52 #1 Dell Inc. PowerEdge T105 /0RR825 RIP: e030:[<ffffffff810d3b8b>] [<ffffffff810d3b8b>] stop_machine_cpu_stop+0x7b/0xf0 RSP: e02b:ffff8800ceaabdb0 EFLAGS: 00000293 .. snip.. Call Trace: [<ffffffff810d3b10>] ? stop_one_cpu_nowait+0x50/0x50 [<ffffffff810d3841>] cpu_stopper_thread+0xf1/0x1c0 [<ffffffff815a9776>] ? __schedule+0x3c6/0x760 [<ffffffff815aa749>] ? _raw_spin_unlock_irqrestore+0x19/0x30 [<ffffffff810d3750>] ? res_counter_charge+0x150/0x150 [<ffffffff8108dc76>] kthread+0x96/0xa0 [<ffffffff815b27e4>] kernel_thread_helper+0x4/0x10 [<ffffffff815aacbc>] ? retint_restore_ar Thix fixes it. Acked-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 21 Mar, 2012 1 commit
-
-
Konrad Rzeszutek Wilk authored
When booting the kernel under machines that do not have P-states we would end up with: ------------[ cut here ]------------ WARNING: at drivers/xen/xen-acpi-processor.c:504 xen_acpi_processor_init+0x286/0 x2e0() Hardware name: ProLiant BL460c G6 Modules linked in: Pid: 1, comm: swapper Not tainted 2.6.39-200.0.3.el5uek #1 Call Trace: [<ffffffff8191d056>] ? xen_acpi_processor_init+0x286/0x2e0 [<ffffffff81068300>] warn_slowpath_common+0x90/0xc0 [<ffffffff8191cdd0>] ? check_acpi_ids+0x1e0/0x1e0 [<ffffffff8106834a>] warn_slowpath_null+0x1a/0x20 [<ffffffff8191d056>] xen_acpi_processor_init+0x286/0x2e0 [<ffffffff8191cdd0>] ? check_acpi_ids+0x1e0/0x1e0 [<ffffffff81002168>] do_one_initcall+0xe8/0x130 .. snip.. Which is OK - the machines do not have P-states, so we fail to register to process the _PXX states. But there is no need to WARN the user of it. Oracle BZ# 13871288 Signed-off-by:
-
- 20 Mar, 2012 5 commits
-
-
Jan Beulich authored
Use 'bool' for boolean variables. Do proper section placement. Eliminate an unnecessary export. Signed-off-by:
Jan Beulich <jbeulich@suse.com> Acked-by:
Dan Magenheimer <dan.magenheimer@oracle.com> Signed-off-by:
-
Stefano Stabellini authored
The pirq_eoi_map is a bitmap offered by Xen to check which pirqs need to be EOI'd without having to issue an hypercall every time. We use PHYSDEVOP_pirq_eoi_gmfn_v2 to map the bitmap, then if we succeed we use pirq_eoi_map to check whether pirqs need eoi. Changes in v3: - explicitly use PHYSDEVOP_pirq_eoi_gmfn_v2 rather than PHYSDEVOP_pirq_eoi_gmfn; - introduce pirq_check_eoi_map, a function to check if a pirq needs an eoi using the map; -rename pirq_needs_eoi into pirq_needs_eoi_flag; - introduce a function pointer called pirq_needs_eoi that is going to be set to the right implementation depending on the availability of PHYSDEVOP_pirq_eoi_gmfn_v2. Signed-off-by:
Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by:
-
Konrad Rzeszutek Wilk authored
With patch "xen/cpufreq: Disable the cpu frequency scaling drivers from loading." we do not have to worry about said drivers loading themselves before the xen-acpi-processor driver. Hence we can remove the default selection (=y if CPU frequency drivers were built-in, or =m if CPU frequency drivers were built as modules), and just select =m for the default case. Signed-off-by: -
Konrad Rzeszutek Wilk authored
By using the functionality provided by "[CPUFREQ]: provide disable_cpuidle() function to disable the API." Under the Xen hypervisor we do not want the initial domain to exercise the cpufreq scaling drivers. This is b/c the Xen hypervisor is in charge of doing this as well and we can end up with both the Linux kernel and the hypervisor trying to change the P-states leading to weird performance issues. Acked-by:
-
Konrad Rzeszutek Wilk authored
useful for disabling cpufreq altogether. The cpu frequency scaling drivers and cpu frequency governors will fail to register. Signed-off-by:
Dave Jones <davej@redhat.com>
-
- 16 Mar, 2012 1 commit
-
-
Andrew Jones authored
PV-on-HVM guests may want to use the xen keyboard/mouse frontend, but they don't use the xen frame buffer frontend. For this case it doesn't make much sense for INPUT_XEN_KBDDEV_FRONTEND to depend on XEN_FBDEV_FRONTEND. The opposite direction always makes more sense, i.e. if you're using xenfb, then you'll want xenkbd. Switch the dependencies. Acked-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
Andrew Jones <drjones@redhat.com> Signed-off-by:
-
- 14 Mar, 2012 2 commits
-
-
Konrad Rzeszutek Wilk authored
This driver solves three problems: 1). Parse and upload ACPI0007 (or PROCESSOR_TYPE) information to the hypervisor - aka P-states (cpufreq data). 2). Upload the the Cx state information (cpuidle data). 3). Inhibit CPU frequency scaling drivers from loading. The reason for wanting to solve 1) and 2) is such that the Xen hypervisor is the only one that knows the CPU usage of different guests and can make the proper decision of when to put CPUs and packages in proper states. Unfortunately the hypervisor has no support to parse ACPI DSDT tables, hence it needs help from the initial domain to provide this information. The reason for 3) is that we do not want the initial domain to change P-states while the hypervisor is doing it as well - it causes rather some funny cases of P-states transitions. For this to work, the driver parses the Power Management data and uploads said information to the Xen hypervisor. It also calls acpi_processor_notify_smm() to inhibit the other CPU frequency scaling drivers from being loaded. Everything revolves around the 'struct acpi_processor' structure which gets updated during the bootup cycle in different stages. At the startup, when the ACPI parser starts, the C-state information is processed (processor_idle) and saved in said structure as 'power' element. Later on, the CPU frequency scaling driver (powernow-k8 or acpi_cpufreq), would call the the acpi_processor_* (processor_perflib functions) to parse P-states information and populate in the said structure the 'performance' element. Since we do not want the CPU frequency scaling drivers from loading we have to call the acpi_processor_* functions to parse the P-states and call "acpi_processor_notify_smm" to stop them from loading. There is also one oddity in this driver which is that under Xen, the physical online CPU count can be different from the virtual online CPU count. Meaning that the macros 'for_[online|possible]_cpu' would process only up to virtual online CPU count. We on the other hand want to process the full amount of physical CPUs. For that, the driver checks if the ACPI IDs count is different from the APIC ID count - which can happen if the user choose to use dom0_max_vcpu argument. In such a case a backup of the PM structure is used and uploaded to the hypervisor. [v1-v2: Initial RFC implementations that were posted] [v3: Changed the name to passthru suggested by Pasi Kärkkäinen <pasik@iki.fi>] [v4: Added vCPU != pCPU support - aka dom0_max_vcpus support] [v5: Cleaned up the driver, fix bug under Athlon XP] [v6: Changed the driver to a CPU frequency governor] [v7: Jan Beulich <jbeulich@suse.com> suggestion to make it a cpufreq scaling driver made me rework it as driver that inhibits cpufreq scaling driver] [v8: Per Jan's review comments, fixed up the driver] [v9: Allow to continue even if acpi_processor_preregister_perf.. fails] Signed-off-by: -
Jan Beulich authored
The functions these get passed to have been taking pointers to const since at least 2.6.16. Signed-off-by:
-
- 13 Mar, 2012 5 commits
-
-
Stefano Stabellini authored
Unfortunately xend creates a bogus console/0 frotend/backend entry pair on xenstore that console backends cannot properly cope with. Any guest behavior that is not completely ignoring console/0 is going to either cause problems with xenconsoled or qemu. Returning 0 or -ENODEV from xencons_probe is not enough because it is going to cause the frontend state to become 4 or 6 respectively. The best possible thing we can do here is just ignore the entry from xenbus_probe_frontend. Signed-off-by:
-
Stefano Stabellini authored
Introduce a new config option HVC_XEN_FRONTEND to enable/disable the xenbus based pv console frontend. Signed-off-by:
-
Stefano Stabellini authored
This patch implements support for multiple consoles: consoles other than the first one are setup using the traditional xenbus and grant-table based mechanism. We use a list to keep track of the allocated consoles, we don't expect too many of them anyway. Changes in v3: - call hvc_remove before removing the console from xenconsoles; - do not lock xencons_lock twice in the destruction path; - use the DEFINE_XENBUS_DRIVER macro. Signed-off-by:
-
Stefano Stabellini authored
Signed-off-by:
-
Jan Beulich authored
The individual drivers' remove functions could legitimately attempt to access this information (for logging messages if nothing else). Note that I did not in fact observe a problem anywhere, but I came across this while looking into the reasons for what turned out to need the fix at https://lkml.org/lkml/2012/3/5/336 to vsprintf(). Signed-off-by:
-
- 10 Mar, 2012 2 commits
-
-
Konrad Rzeszutek Wilk authored
For the hypervisor to take advantage of the MWAIT support it needs to extract from the ACPI _CST the register address. But the hypervisor does not have the support to parse DSDT so it relies on the initial domain (dom0) to parse the ACPI Power Management information and push it up to the hypervisor. The pushing of the data is done by the processor_harveset_xen module which parses the information that the ACPI parser has graciously exposed in 'struct acpi_processor'. For the ACPI parser to also expose the Cx states for MWAIT, we need to expose the MWAIT capability (leaf 1). Furthermore we also need to expose the MWAIT_LEAF capability (leaf 5) for cstate.c to properly function. The hypervisor could expose these flags when it traps the XEN_EMULATE_PREFIX operations, but it can't do it since it needs to be backwards compatible. Instead we choose to use the native CPUID to figure out if the MWAIT capability exists and use the XEN_SET_PDC query hypercall to figure out if the hypervisor wants us to expose the MWAIT_LEAF capability or not. Note: The XEN_SET_PDC query was implemented in c/s 23783: "ACPI: add _PDC input override mechanism". With this in place, instead of C3 ACPI IOPORT 415 we get now C3:ACPI FFH INTEL MWAIT 0x20 Note: The cpu_idle which would be calling the mwait variants for idling never gets set b/c we set the default pm_idle to be the hypercall variant. Acked-by:
-
Konrad Rzeszutek Wilk authored
We needed that call in the past to force the kernel to use default_idle (which called safe_halt, which called xen_safe_halt). But set_pm_idle_to_default() does now that, so there is no need to use this boot option operand. Signed-off-by:
-
- 26 Feb, 2012 1 commit
-
-
Jan Beulich authored
- casting pointers to integer types of different size is being warned on - an uninitialized variable warning occurred on certain gcc versions Signed-off-by:
-
- 24 Jan, 2012 1 commit
-
-
Alex Shi authored
percpu_xxx funcs are duplicated with this_cpu_xxx funcs, so replace them for further code clean up. I don't know much of xen code. But, since the code is in x86 architecture, the percpu_xxx is exactly same as this_cpu_xxx serials functions. So, the change is safe. Signed-off-by:
Alex Shi <alex.shi@intel.com> Acked-by:
Christoph Lameter <cl@gentwo.org> Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
- 12 Jan, 2012 4 commits
-
-
Konrad Rzeszutek Wilk authored
We use the __pci_reset_function_locked to perform the action. Also on attaching ("bind") and detaching ("unbind") we save and restore the configuration states. When the device is disconnected from a guest we use the "pci_reset_function" to also reset the device before being passed to another guest. Signed-off-by: -
Konrad Rzeszutek Wilk authored
The use case of this is when a driver wants to call FLR when a device is attached to it using the SysFS "bind" or "unbind" functionality. The call chain when a user does "bind" looks as so: echo "0000:01.07.0" > /sys/bus/pci/drivers/XXXX/bind and ends up calling: driver_bind: device_lock(dev); <=== TAKES LOCK XXXX_probe: .. pci_enable_device() ...__pci_reset_function(), which calls pci_dev_reset(dev, 0): if (!0) { device_lock(dev) <==== DEADLOCK The __pci_reset_function_locked function allows the the drivers 'probe' function to call the "pci_reset_function" while still holding the driver mutex lock. Signed-off-by: -
Tang Liang authored
to make a hypercall to restore the vectors in the MSI/MSI-X configuration space. Signed-off-by:
Tang Liang <liang.tang@oracle.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pciLinus Torvalds authored
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci: (80 commits) x86/PCI: Expand the x86_msi_ops to have a restore MSIs. PCI: Increase resource array mask bit size in pcim_iomap_regions() PCI: DEVICE_COUNT_RESOURCE should be equal to PCI_NUM_RESOURCES PCI: pci_ids: add device ids for STA2X11 device (aka ConneXT) PNP: work around Dell 1536/1546 BIOS MMCONFIG bug that breaks USB x86/PCI: amd: factor out MMCONFIG discovery PCI: Enable ATS at the device state restore PCI: msi: fix imbalanced refcount of msi irq sysfs objects PCI: kconfig: English typo in pci/pcie/Kconfig PCI/PM/Runtime: make PCI traces quieter PCI: remove pci_create_bus() xtensa/PCI: convert to pci_scan_root_bus() for correct root bus resources x86/PCI: convert to pci_create_root_bus() and pci_scan_root_bus() x86/PCI: use pci_scan_bus() instead of pci_scan_bus_parented() x86/PCI: read Broadcom CNB20LE host bridge info before PCI scan sparc32, leon/PCI: convert to pci_scan_root_bus() for correct root bus resources sparc/PCI: convert to pci_create_root_bus() sh/PCI: convert to pci_scan_root_bus() for correct root bus resources powerpc/PCI: convert to pci_create_root_bus() powerpc/PCI: split PHB part out of pcibios_map_io_space() ... Fix up conflicts in drivers/pci/msi.c and include/linux/pci_regs.h due to the same patches being applied in other branches.
-
- 11 Jan, 2012 17 commits
-
-
Ben Hutchings authored
frv, h8300, m68k, microblaze, openrisc, score, um and xtensa currently do not register a CPU device. Add the config option GENERIC_CPU_DEVICES which causes a generic CPU device to be registered for each present CPU, and make all these architectures select it. Richard Weinberger <richard@nod.at> covered UML and suggested using per_cpu. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Ben Hutchings authored
cpu_dev_init() is only called from driver_init(), which does not check its return value. Therefore make cpu_dev_init() return void. We must register the CPU subsystem, so panic if this fails. If sched_create_sysfs_power_savings_entries() fails, the damage is contained, so ignore this (as before). Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (54 commits) crypto: gf128mul - remove leftover "(EXPERIMENTAL)" in Kconfig crypto: serpent-sse2 - remove unneeded LRW/XTS #ifdefs crypto: serpent-sse2 - select LRW and XTS crypto: twofish-x86_64-3way - remove unneeded LRW/XTS #ifdefs crypto: twofish-x86_64-3way - select LRW and XTS crypto: xts - remove dependency on EXPERIMENTAL crypto: lrw - remove dependency on EXPERIMENTAL crypto: picoxcell - fix boolean and / or confusion crypto: caam - remove DECO access initialization code crypto: caam - fix polarity of "propagate error" logic crypto: caam - more desc.h cleanups crypto: caam - desc.h - convert spaces to tabs crypto: talitos - convert talitos_error to struct device crypto: talitos - remove NO_IRQ references crypto: talitos - fix bad kfree crypto: convert drivers/crypto/* to use module_platform_driver() char: hw_random: convert drivers/char/hw_random/* to use module_platform_driver() crypto: serpent-sse2 - should select CRYPTO_CRYPTD crypto: serpent - rename serpent.c to serpent_generic.c crypto: serpent - cleanup checkpatch errors and warnings ...
-
git://selinuxproject.org/~jmorris/linux-securityLinus Torvalds authored
* 'for-linus' of git://selinuxproject.org/~jmorris/linux-security: (32 commits) ima: fix invalid memory reference ima: free duplicate measurement memory security: update security_file_mmap() docs selinux: Casting (void *) value returned by kmalloc is useless apparmor: fix module parameter handling Security: tomoyo: add .gitignore file tomoyo: add missing rcu_dereference() apparmor: add missing rcu_dereference() evm: prevent racing during tfm allocation evm: key must be set once during initialization mpi/mpi-mpow: NULL dereference on allocation failure digsig: build dependency fix KEYS: Give key types their own lockdep class for key->sem TPM: fix transmit_cmd error logic TPM: NSC and TIS drivers X86 dependency fix TPM: Export wait_for_stat for other vendor specific drivers TPM: Use vendor specific function for status probe tpm_tis: add delay after aborting command tpm_tis: Check return code from getting timeouts/durations tpm: Introduce function to poll for result of self test ... Fix up trivial conflict in lib/Makefile due to addition of CONFIG_MPI and SIGSIG next to CONFIG_DQL addition.
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: autofs4: deal with autofs4_write/autofs4_write races autofs4: catatonic_mode vs. notify_daemon race autofs4: autofs4_wait() vs. autofs4_catatonic_mode() race hfsplus: creation of hidden dir on mount can fail block_dev: Suppress bdev_cache_init() kmemleak warninig fix shrink_dcache_parent() livelock coda: switch coda_cnode_make() to sane API as well, clean coda_lookup() coda: deal correctly with allocation failure from coda_cnode_makectl() securityfs: fix object creation races
-
Al Viro authored
Just serialize the actual writing of packets into pipe on a new mutex, independent from everything else in the locking hierarchy. As soon as something has started feeding a piece of packet into the pipe to daemon, we *want* everything else about to try the same to wait until we are done. Acked-by:
Ian Kent <raven@themaw.net> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
we need to hold ->wq_mutex while we are forming the packet to send, lest we have autofs4_catatonic_mode() setting wq->name.name to NULL just as autofs4_notify_daemon() decides to memcpy() from it... We do have check for catatonic mode immediately after that (under ->wq_mutex, as it ought to be) and packet won't be actually sent, but it'll be too late for us if we oops on that memcpy() from NULL... Fix is obvious - just extend the area covered by ->wq_mutex over that switch and check whether it's catatonic *before* doing anything else. Acked-by:
-
Al Viro authored
We need to recheck ->catatonic after autofs4_wait() got ->wq_mutex for good, or we might end up with wq inserted into queue after autofs4_catatonic_mode() had done its thing. It will stick there forever, since there won't be anything to clear its ->name.name. A bit of a complication: validate_request() drops and regains ->wq_mutex. It actually ends up the most convenient place to stick the check into... Acked-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds authored
lib: use generic pci_iomap on all architectures Many architectures don't want to pull in iomap.c, so they ended up duplicating pci_iomap from that file. That function isn't trivial, and we are going to modify it https://lkml.org/lkml/2011/11/14/183 so the duplication hurts. This reduces the scope of the problem significantly, by moving pci_iomap to a separate file and referencing that from all architectures. * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: alpha: drop pci_iomap/pci_iounmap from pci-noop.c mn10300: switch to GENERIC_PCI_IOMAP mn10300: add missing __iomap markers frv: switch to GENERIC_PCI_IOMAP tile: switch to GENERIC_PCI_IOMAP tile: don't panic on iomap sparc: switch to GENERIC_PCI_IOMAP sh: switch to GENERIC_PCI_IOMAP powerpc: switch to GENERIC_PCI_IOMAP parisc: switch to GENERIC_PCI_IOMAP mips: switch to GENERIC_PCI_IOMAP microblaze: switch to GENERIC_PCI_IOMAP arm: switch to GENERIC_PCI_IOMAP alpha: switch to GENERIC_PCI_IOMAP lib: add GENERIC_PCI_IOMAP lib: move GENERIC_IOMAP to lib/Kconfig Fix up trivial conflicts due to changes nearby in arch/{m68k,score}/Kconfig
-
git://linux-c6x.org/git/projects/linux-c6x-upstreamingLinus Torvalds authored
* tag 'for-linux-3.3-merge-window' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming: (29 commits) C6X: replace tick_nohz_stop/restart_sched_tick calls C6X: add register_cpu call C6X: deal with memblock API changes C6X: fix timer64 initialization C6X: fix layout of EMIFA registers C6X: MAINTAINERS C6X: DSCR - Device State Configuration Registers C6X: EMIF - External Memory Interface C6X: general SoC support C6X: library code C6X: headers C6X: ptrace support C6X: loadable module support C6X: cache control C6X: clocks C6X: build infrastructure C6X: syscalls C6X: interrupt handling C6X: time management C6X: signal management ...
-
git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds authored
* 'next' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Wire-up new system calls microblaze: Remove NO_IRQ from architecture input: xilinx_ps2: Don't use NO_IRQ block: xsysace: Don't use NO_IRQ microblaze: Trivial asm fix microblaze: Fix debug message in module microblaze: Remove eprintk macro microblaze: Send CR before LF for early console microblaze: Change NO_IRQ to 0 microblaze: Use irq_of_parse_and_map for timer microblaze: intc: Change variable name microblaze: Use of_find_compatible_node for timer and intc microblaze: Add __cmpdi2 microblaze: Synchronize __pa __va macros
-
git://github.com/gxt/linuxLinus Torvalds authored
* 'unicore32' of git://github.com/gxt/linux: rtc-puv3: solve section mismatch in rtc-puv3.c rtc-puv3: using module_platform_driver() i2c-puv3: using module_platform_driver() rtc-puv3: irq: remove IRQF_DISABLED unicore32: Remove IRQF_DISABLED unicore32: Use set_current_blocked() unicore32: add ioremap_nocache definition unicore32: delete specified xlate_dev_mem_ptr of: add include asm/setup.h in drivers/of/fdt.c unicore32: standardize /proc/iomem "Kernel code" name
-
git://git.kernel.org/pub/scm/linux/kernel/git/lliubbo/blackfinLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lliubbo/blackfin: blackfin: bf561: add adv7183 capture support blackfin: bf537: add capture support blackfin: bf548: add capture support blackfin: time-ts: rm unused func broadcast_timer_setup() blackfin: i2c-lcd: change default clock rate blackfin: mac: dsa: add vlan mask in board file blackfin: bf537: change num_chipselect for spi-sport blackfin: serial: bfin-uart: remove unused field bf54x: get mem size: missing break in switch blackfin: smp: fix msg queue overflow issue blackfin: config: update macro SPI_BFIN in board file blackfin: config: update def config for all boards blackfin: smp: cleanup smp code blackfin: smp: add suspend and wakeup irq flags blackfin: bf533-stamp: add missed patches for new asoc driver blackfin: bf533-stamp: fix ad1836 name
-
git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linuxLinus Torvalds authored
* 'writeback-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux: writeback: move MIN_WRITEBACK_PAGES to fs-writeback.c writeback: balanced_rate cannot exceed write bandwidth writeback: do strict bdi dirty_exceeded writeback: avoid tiny dirty poll intervals writeback: max, min and target dirty pause time writeback: dirty ratelimit - think time compensation btrfs: fix dirtied pages accounting on sub-page writes writeback: fix dirtied pages accounting on redirty writeback: fix dirtied pages accounting on sub-page writes writeback: charge leaked page dirties to active tasks writeback: Include all dirty inodes in background writeback
-
Linus Torvalds authored
Andrew elucidates: - First installmeant of MM. We have a HUGE number of MM patches this time. It's crazy. - MAINTAINERS updates - backlight updates - leds - checkpatch updates - misc ELF stuff - rtc updates - reiserfs - procfs - some misc other bits * akpm: (124 commits) user namespace: make signal.c respect user namespaces workqueue: make alloc_workqueue() take printf fmt and args for name procfs: add hidepid= and gid= mount options procfs: parse mount options procfs: introduce the /proc/<pid>/map_files/ directory procfs: make proc_get_link to use dentry instead of inode signal: add block_sigmask() for adding sigmask to current->blocked sparc: make SA_NOMASK a synonym of SA_NODEFER reiserfs: don't lock root inode searching reiserfs: don't lock journal_init() reiserfs: delay reiserfs lock until journal initialization reiserfs: delete comments referring to the BKL drivers/rtc/interface.c: fix alarm rollover when day or month is out-of-range drivers/rtc/rtc-twl.c: add DT support for RTC inside twl4030/twl6030 drivers/rtc/: remove redundant spi driver bus initialization drivers/rtc/rtc-jz4740.c: make jz4740_rtc_driver static drivers/rtc/rtc-mc13xxx.c: make mc13xxx_rtc_idtable static rtc: convert drivers/rtc/* to use module_platform_driver() drivers/rtc/rtc-wm831x.c: convert to devm_kzalloc() drivers/rtc/rtc-wm831x.c: remove unused period IRQ handler ...
-
Serge E. Hallyn authored
ipc/mqueue.c: for __SI_MESQ, convert the uid being sent to recipient's user namespace. (new, thanks Oleg) __send_signal: convert current's uid to the recipient's user namespace for any siginfo which is not SI_FROMKERNEL (patch from Oleg, thanks again :) do_notify_parent and do_notify_parent_cldstop: map task's uid to parent's user namespace ptrace_signal maps parent's uid into current's user namespace before including in signal to current. IIUC Oleg has argued that this shouldn't matter as the debugger will play with it, but it seems like not converting the value currently being set is misleading. Changelog: Sep 20: Inspired by Oleg's suggestion, define map_cred_ns() helper to simplify callers and help make clear what we are translating (which uid into which namespace). Passing the target task would make callers even easier to read, but we pass in user_ns because current_user_ns() != task_cred_xxx(current, user_ns). Sep 20: As recommended by Oleg, also put task_pid_vnr() under rcu_read_lock in ptrace_signal(). Sep 23: In send_signal(), detect when (user) signal is coming from an ancestor or unrelated user namespace. Pass that on to __send_signal, which sets si_uid to 0 or overflowuid if needed. Oct 12: Base on Oleg's fixup_uid() patch. On top of that, handle all SI_FROMKERNEL cases at callers, because we can't assume sender is current in those cases. Nov 10: (mhelsley) rename fixup_uid to more meaningful usern_fixup_signal_uid Nov 10: (akpm) make the !CONFIG_USER_NS case clearer Signed-off-by:Serge Hallyn <serge.hallyn@canonical.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> From: Serge Hallyn <serge.hallyn@canonical.com> Subject: __send_signal: pass q->info, not info, to userns_fixup_signal_uid (v2) Eric Biederman pointed out that passing info is a bug and could lead to a NULL pointer deref to boot. A collection of signal, securebits, filecaps, cap_bounds, and a few other ltp tests passed with this kernel. Changelog: Nov 18: previous patch missed a leading '&' Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by:
Serge Hallyn <serge@hallyn.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Tejun Heo authored
alloc_workqueue() currently expects the passed in @name pointer to remain accessible. This is inconvenient and a bit silly given that the whole wq is being dynamically allocated. This patch updates alloc_workqueue() and friends to take printf format string instead of opaque string and matching varargs at the end. The name is allocated together with the wq and formatted. alloc_ordered_workqueue() is converted to a macro to unify varargs handling with alloc_workqueue(), and, while at it, add comment to alloc_workqueue(). None of the current in-kernel users pass in string with '%' as constant name and this change shouldn't cause any problem. [akpm@linux-foundation.org: use __printf] Signed-off-by:
Christoph Hellwig <hch@infradead.org> Signed-off-by:
-
