Merge tag 'wireless-drivers-2021-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
wireless-drivers fixes for v5.12

Third, and last, set of fixes for v5.12. Small fixes, iwlwifi having
most of them. brcmfmac regression caused by cfg80211 changes is the
most important here.

iwlwifi

* fix a lockdep warning

* fix regulatory feature detection in certain firmware versions

* new hardware support

* fix lockdep warning

* mvm: fix beacon protection checks

mt76

* mt7921: fix airtime reporting

brcmfmac

* fix a deadlock regression
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Danielle Ratson says:

====================
Fix link_mode derived params functionality

Currently, link_mode parameter derives 3 other link parameters, speed,
lanes and duplex, and the derived information is sent to user space.

Few bugs were found in that functionality.
First, some drivers clear the 'ethtool_link_ksettings' struct in their
get_link_ksettings() callback and cause receiving wrong link mode
information in user space. And also, some drivers can report random
values in the 'link_mode' field and cause general protection fault.

Second, the link parameters are only derived in netlink path so in ioctl
path, we don't any reasonable values.

Third, setting 'speed 10000 lanes 1' fails since the lanes parameter
wasn't set for ETHTOOL_LINK_MODE_10000baseR_FEC_BIT.

Patch #1 solves the first two problems by removing link_mode parameter
and deriving the link parameters in driver instead of ethtool.
Patch #2 solves the third one, by setting the lanes parameter for the
link_mode.

v3:
	* Remove the link_mode parameter in the first patch to solve
	  both two issues from patch#1 and patch#2.
	* Add the second patch to solve the third issue.

v2:
	* Add patch #2.
	* Introduce 'cap_link_mode_supported' instead of adding a
	  validity field to 'ethtool_link_ksettings' struct in patch #1.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Lanes field is missing for ETHTOOL_LINK_MODE_10000baseR_FEC_BIT
link mode and it causes a failure when trying to set
'speed 10000 lanes 1' on Spectrum-2 machines when autoneg is set to on.

Add the lanes parameter for ETHTOOL_LINK_MODE_10000baseR_FEC_BIT
link mode.

Fixes: c8907043 ("ethtool: Get link mode in use instead of speed and duplex parameters")
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some drivers clear the 'ethtool_link_ksettings' struct in their
get_link_ksettings() callback, before populating it with actual values.
Such drivers will set the new 'link_mode' field to zero, resulting in
user space receiving wrong link mode information given that zero is a
valid value for the field.

Another problem is that some drivers (notably tun) can report random
values in the 'link_mode' field. This can result in a general protection
fault when the field is used as an index to the 'link_mode_params' array
[1].

This happens because such drivers implement their set_link_ksettings()
callback by simply overwriting their private copy of
'ethtool_link_ksettings' struct with the one they get from the stack,
which is not always properly initialized.

Fix these problems by removing 'link_mode' from 'ethtool_link_ksettings'
and instead have drivers call ethtool_params_from_link_mode() with the
current link mode. The function will derive the link parameters (e.g.,
speed) from the link mode and fill them in the 'ethtool_link_ksettings'
struct.

v3:
	* Remove link_mode parameter and derive the link parameters in
	  the driver instead of passing link_mode parameter to ethtool
	  and derive it there.

v2:
	* Introduce 'cap_link_mode_supported' instead of adding a
	  validity field to 'ethtool_link_ksettings' struct.

[1]
general protection fault, probably for non-canonical address 0xdffffc00f14cc32c: 0000 [#1] PREEMPT SMP KASAN
KASAN: probably user-memory-access in range [0x000000078a661960-0x000000078a661967]
CPU: 0 PID: 8452 Comm: syz-executor360 Not tainted 5.11.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:__ethtool_get_link_ksettings+0x1a3/0x3a0 net/ethtool/ioctl.c:446
Code: b7 3e fa 83 fd ff 0f 84 30 01 00 00 e8 16 b0 3e fa 48 8d 3c ed 60 d5 69 8a 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 03
+38 d0 7c 08 84 d2 0f 85 b9
RSP: 0018:ffffc900019df7a0 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffff888026136008 RCX: 0000000000000000
RDX: 00000000f14cc32c RSI: ffffffff873439ca RDI: 000000078a661960
RBP: 00000000ffff8880 R08: 00000000ffffffff R09: ffff88802613606f
R10: ffffffff873439bc R11: 0000000000000000 R12: 0000000000000000
R13: ffff88802613606c R14: ffff888011d0c210 R15: ffff888011d0c210
FS:  0000000000749300(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000004b60f0 CR3: 00000000185c2000 CR4: 00000000001506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 linkinfo_prepare_data+0xfd/0x280 net/ethtool/linkinfo.c:37
 ethnl_default_notify+0x1dc/0x630 net/ethtool/netlink.c:586
 ethtool_notify+0xbd/0x1f0 net/ethtool/netlink.c:656
 ethtool_set_link_ksettings+0x277/0x330 net/ethtool/ioctl.c:620
 dev_ethtool+0x2b35/0x45d0 net/ethtool/ioctl.c:2842
 dev_ioctl+0x463/0xb70 net/core/dev_ioctl.c:440
 sock_do_ioctl+0x148/0x2d0 net/socket.c:1060
 sock_ioctl+0x477/0x6a0 net/socket.c:1177
 vfs_ioctl fs/ioctl.c:48 [inline]
 __do_sys_ioctl fs/ioctl.c:753 [inline]
 __se_sys_ioctl fs/ioctl.c:739 [inline]
 __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:739
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: c8907043 ("ethtool: Get link mode in use instead of speed and duplex parameters")
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
mlx5 fixes 2021-04-06

This series provides some fixes to mlx5 driver.
Please pull and let me know if there is any problem.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

These patches fix a series of spelling errors in net/tipc module.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Reset MAC header in HSR Tx path. This is needed, because direct packet
transmission, e.g. by specifying PACKET_QDISC_BYPASS does not reset the MAC
header.

This has been observed using the following setup:

|$ ip link add name hsr0 type hsr slave1 lan0 slave2 lan1 supervision 45 version 1
|$ ifconfig hsr0 up
|$ ./test hsr0

The test binary is using mmap'ed sockets and is specifying the
PACKET_QDISC_BYPASS socket option.

This patch resolves the following warning on a non-patched kernel:

|[  112.725394] ------------[ cut here ]------------
|[  112.731418] WARNING: CPU: 1 PID: 257 at net/hsr/hsr_forward.c:560 hsr_forward_skb+0x484/0x568
|[  112.739962] net/hsr/hsr_forward.c:560: Malformed frame (port_src hsr0)

The warning can be safely removed, because the other call sites of
hsr_forward_skb() make sure that the skb is prepared correctly.

Fixes: d346a3fa ("packet: introduce PACKET_QDISC_BYPASS socket option")
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
ethtool: kdoc fixes

Number of kdoc fixes to ethtool headers. All comment changes.

With all the patches posted kdoc script seems happy:
$ ./scripts/kernel-doc -none include/uapi/linux/ethtool.h include/linux/ethtool.h
$

Note that some of the changes are in -next, e.g. the FEC
documentation update so full effect will be seen after
trees converge.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix remaining issues with kdoc in the ethtool headers.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a note on expected handling of reserved fields,
and references to all kdocs. This fixes a bunch
of kdoc warnings.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Extended link state structures and enums use kdoc headers
but then do not describe any of the members.

Convert to normal comments.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

In case of rs failure in rds_send_remove_from_sock(), the 'rm' resource
is freed and later under spinlock, causing potential use-after-free.
Set the free pointer to NULL to avoid undefined behavior.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Memory allocated by kvzalloc() should be freed by kvfree().

Fixes: 34ca6535 ("net/mlx5: E-Switch, Indirect table infrastructur")
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Add reserved mapping to cover all the register in order to avoid setting
arbitrary values to newer FW which implements the reserved fields.

Fixes: 50b4a3c2 ("net/mlx5: PPTB and PBMC register firmware command support")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Add reserved mapping to cover all the register in order to avoid
setting arbitrary values to newer FW which implements the reserved
fields.

Fixes: a58837f5 ("net/mlx5e: Expose FEC feilds and related capability bit")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The cited commit wrongly placed log_max_flow_counter field of
mlx5_ifc_flow_table_prop_layout_bits, align it to the HW spec intended
placement.

Fixes: 16f1c5bb ("net/mlx5: Check device capability for maximum flow counters")
Signed-off-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Make sure to modify uplink port to follow only if the uplink_follow
capability is set as required by the HW spec. Failure to do so causes
traffic to the uplink representor net device to cease after switching to
switchdev mode.

Fixes: 7d0314b1 ("net/mlx5e: Modify uplink state on interface up/down")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Fix incorrect documentation. Mostly referring to other objects,
likely because the text was copied and not adjusted.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

When changing type with TUNSETLINK ioctl command, set tun->dev->addr_len
to match the appropriate type, using new tun_get_addr_len utility function
which returns appropriate address length for given type. Fixes a
KMSAN-found uninit-value bug reported by syzbot at:
https://syzkaller.appspot.com/bug?id=0766d38c656abeace60621896d705743aeefed51

Reported-by: syzbot+001516d86dbe88862cec@syzkaller.appspotmail.com
Diagnosed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The member 'tx_lpi_timer' is defined with __u32 datatype in the ethtool
header file. Hence, we should use ethnl_update_u32() in set_eee ops.

Fixes: fd77be7b ("ethtool: set EEE settings with EEE_SET request")
Cc: <stable@vger.kernel.org> # 5.10.x
Cc: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, the VF down state bit is cleared after VF sending
link status request command. There is problem that when VF gets
link status replied from PF, the down state bit may still set
as 1. In this case, the link status replied from PF will be
ignored and always set VF link status to down.

To fix this problem, clear VF down state bit before VF requests
link status.

Fixes: e2cb1dec ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'linux-can-fixes-for-5.12-20210406' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2021-04-06

this is a pull request of 1 patch for net/master.

The patch is by me and fixes the SPI half duplex support in the
mcp251x CAN driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

pci_resource_start() is not a good indicator to determine if a PCI
resource exists or not, since the resource may start at address 0.
This is seen when trying to instantiate the driver in qemu for riscv32
or riscv64.

pci 0000:00:01.0: reg 0x10: [io  0x0000-0x001f]
pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x0000001f]
...
pcnet32: card has no PCI IO resources, aborting

Use pci_resouce_len() instead.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Li Shuang found a NULL pointer dereference crash in her testing:

  [] BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
  [] RIP: 0010:tipc_crypto_rcv_complete+0xc8/0x7e0 [tipc]
  [] Call Trace:
  []  <IRQ>
  []  tipc_crypto_rcv+0x2d9/0x8f0 [tipc]
  []  tipc_rcv+0x2fc/0x1120 [tipc]
  []  tipc_udp_recv+0xc6/0x1e0 [tipc]
  []  udpv6_queue_rcv_one_skb+0x16a/0x460
  []  udp6_unicast_rcv_skb.isra.35+0x41/0xa0
  []  ip6_protocol_deliver_rcu+0x23b/0x4c0
  []  ip6_input+0x3d/0xb0
  []  ipv6_rcv+0x395/0x510
  []  __netif_receive_skb_core+0x5fc/0xc40

This is caused by NULL returned by tipc_aead_get(), and then crashed when
dereferencing it later in tipc_crypto_rcv_complete(). This might happen
when tipc_crypto_rcv_complete() is called by two threads at the same time:
the tmp attached by tipc_crypto_key_attach() in one thread may be released
by the one attached by that in the other thread.

This patch is to fix it by incrementing the tmp's refcnt before attaching
it instead of calling tipc_aead_get() after attaching it.

Fixes: fc1b6d6d ("tipc: introduce TIPC encryption & authentication")
Reported-by: Li Shuang <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Xuan Zhuo reported that commit 3226b158 ("net: avoid 32 x truesize
under-estimation for tiny skbs") brought  a ~10% performance drop.

The reason for the performance drop was that GRO was forced
to chain sk_buff (using skb_shinfo(skb)->frag_list), which
uses more memory but also cause packet consumers to go over
a lot of overhead handling all the tiny skbs.

It turns out that virtio_net page_to_skb() has a wrong strategy :
It allocates skbs with GOOD_COPY_LEN (128) bytes in skb->head, then
copies 128 bytes from the page, before feeding the packet to GRO stack.

This was suboptimal before commit 3226b158 ("net: avoid 32 x truesize
under-estimation for tiny skbs") because GRO was using 2 frags per MSS,
meaning we were not packing MSS with 100% efficiency.

Fix is to pull only the ethernet header in page_to_skb()

Then, we change virtio_net_hdr_to_skb() to pull the missing
headers, instead of assuming they were already pulled by callers.

This fixes the performance regression, but could also allow virtio_net
to accept packets with more than 128bytes of headers.

Many thanks to Xuan Zhuo for his report, and his tests/help.

Fixes: 3226b158 ("net: avoid 32 x truesize under-estimation for tiny skbs")
Reported-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://www.spinics.net/lists/netdev/msg731397.htmlCo-Developed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: virtualization@lists.linux-foundation.org
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In bcm4908_enet_dma_alloc, if callee bcm4908_dma_alloc_buf_descs() failed,
it will free the ring->cpu_addr by dma_free_coherent() and return error.
Then bcm4908_enet_dma_free() will be called, and free the same cpu_addr
by dma_free_coherent() again.

My patch set ring->cpu_addr to NULL after it is freed in
bcm4908_dma_alloc_buf_descs() to avoid the double free.

Fixes: 4feffead ("net: broadcom: bcm4908enet: add BCM4908 controller driver")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some SPI host controllers do not support full-duplex SPI transfers.

The function mcp251x_spi_trans() does a full duplex transfer. It is
used in several places in the driver, where a TX half duplex transfer
is sufficient.

To fix support for half duplex SPI host controllers, this patch
introduces a new function mcp251x_spi_write() and changes all callers
that do a TX half duplex transfer to use mcp251x_spi_write().

Fixes: e0e25001 ("can: mcp251x: add support for half duplex controllers")
Link: https://lore.kernel.org/r/20210330100246.1074375-1-mkl@pengutronix.de
Cc: Tim Harvey <tharvey@gateworks.com>
Tested-By: Tim Harvey <tharvey@gateworks.com>
Reported-by: Gerhard Bertelsmann <info@gerhard-bertelsmann.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Unfortunately, since beacon protection isn't fully available
yet, we didn't notice that there are problems with it and
that the replay detection isn't working correctly. We were
relying only on mac80211, since iwl_mvm_rx_crypto() exits
when !ieee80211_has_protected(), which is of course true for
protected (but not encrypted) management frames.

Fix this to properly detect protected (but not encrypted)
management frames and handle them - we continue to only care
about beacons since for others everything can and will be
checked in mac80211.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes: b1fdc250 ("iwlwifi: mvm: advertise BIGTK client support if available")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210326125611.23c990843369.I09c262a8f6f9852cc8f513cdcb31a7f8f87dd8af@changeid

The mutex is already locked in iwl_mvm_mac_start.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Fixes: 21254908 ("iwlwifi: mvm: add RFI-M support")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210326125611.703288ea058d.I82a0312389032d07c3b478bef3e938e06bfa7df6@changeid

We have a new type of device that has a different MAC ID, but is
otherwise identical to So devices.  Add rules to match this new ID
accordingly.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210326125611.4feea3560def.I2b6ef794c2073a18779dd40fb53f8c942d1ab42d@changeid

Since we now call iwl_notification_wait_notify() from the
NAPI poll in soft-IRQ, we get a (valid) lockdep complaint
that we could get a deadlock by taking the spinlock from
sleeping context and then getting the soft-IRQ that also
tries to take it (in NAPI polling).

Fix this by disabling soft-IRQs for this lock.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes: 25edc8f2 ("iwlwifi: pcie: properly implement NAPI")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210326125611.c3b2e3d6b58b.Ic56f351d04674df70567bab0269cba91bdbc853c@changeid

Add this specific Samsung AX201 sku to driver so it can be
detected and initialized successfully.
Signed-off-by: Matt Chen <matt.chen@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210326125611.30b622037714.Id9fd709cf1c8261c097bbfd7453f6476077dcafc@changeid

As the context info gen3 code is only called for >=AX210 devices
(from iwl_trans_pcie_gen2_start_fw()) the code there to set LTR
on 22000 devices cannot actually do anything (22000 < AX210).

Fix this by moving the LTR code to iwl_trans_pcie_gen2_start_fw()
where it can handle both devices. This then requires that we kick
the firmware only after that rather than doing it from the context
info code.

Note that this again had a dead branch in gen3 code, which I've
removed here.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes: ed0022da ("iwlwifi: pcie: set LTR on more devices")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210326125611.675486178ed1.Ib61463aba6920645059e366dcdca4c4c77f0ff58@changeid

When version 2 of the regulatory capability flags API was implemented,
the flag to disable 11ax was defined as bit 13, but this was later
changed and the bit remained as bit 10, like in version 1.  This was
never changed in the driver, so we were checking for the wrong bit in
newer devices.  Fix it.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Fixes: e27c506a ("iwlwifi: regulatory: regulatory capabilities api change")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210326125611.6d28516b59cd.Id0248d5e4662695254f49ce37b0268834ed52918@changeid

KMSAN found uninitialized value at batadv_tt_prepare_tvlv_local_data()
[1], for commit ced72933 ("batman-adv: use CRC32C instead of CRC16
in TT code") inserted 'reserved' field into "struct batadv_tvlv_tt_data"
and commit 7ea7b4a1 ("batman-adv: make the TT CRC logic VLAN
specific") moved that field to "struct batadv_tvlv_tt_vlan_data" but left
that field uninitialized.

[1] https://syzkaller.appspot.com/bug?id=07f3e6dba96f0eb3cabab986adcd8a58b9bdbe9dReported-by: syzbot <syzbot+50ee810676e6a089487b@syzkaller.appspotmail.com>
Tested-by: syzbot <syzbot+50ee810676e6a089487b@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: ced72933 ("batman-adv: use CRC32C instead of CRC16 in TT code")
Fixes: 7ea7b4a1 ("batman-adv: make the TT CRC logic VLAN specific")
Acked-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Salil Mehta says:

====================
Misc. fixes for hns3 driver

Fixes for the miscellaneous problems found during the review of the code.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Code to defer the reset(which caps the frequency of the reset) schedules the
timer and returns. Hence, following 'else-if' looks un-necessary.

Fixes: 9de0b86f ("net: hns3: Prevent to request reset frequently")
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This removes the left over check and assignment which is no longer used
anywhere in the function and should have been removed as part of the
below mentioned patch.

Fixes: 012fcb52 ("net: hns3: activate reset timer when calling reset_event")
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Found by virtue of ipv6 raw sockets not honouring the per-socket
IP{,V6}_FREEBIND setting.

Based on hits found via:
  git grep '[.]ip_nonlocal_bind'
We fix both raw ipv6 sockets to honour IP{,V6}_FREEBIND and IP{,V6}_TRANSPARENT,
and we fix sctp sockets to honour IP{,V6}_TRANSPARENT (they already honoured
FREEBIND), and not just the ipv6 'ip_nonlocal_bind' sysctl.

The helper is defined as:
  static inline bool ipv6_can_nonlocal_bind(struct net *net, struct inet_sock *inet) {
    return net->ipv6.sysctl.ip_nonlocal_bind || inet->freebind || inet->transparent;
  }
so this change only widens the accepted opt-outs and is thus a clean bugfix.

I'm not entirely sure what 'fixes' tag to add, since this is AFAICT an ancient bug,
but IMHO this should be applied to stable kernels as far back as possible.
As such I'm adding a 'fixes' tag with the commit that originally added the helper,
which happened in 4.19.  Backporting to older LTS kernels (at least 4.9 and 4.14)
would presumably require open-coding it or backporting the helper as well.

Other possibly relevant commits:
  v4.18-rc6-1502-g83ba4645 net: add helpers checking if socket can be bound to nonlocal address
  v4.18-rc6-1431-gd0c1f011 net/ipv6: allow any source address for sendmsg pktinfo with ip_nonlocal_bind
  v4.14-rc5-271-gb71d21c2 sctp: full support for ipv6 ip_nonlocal_bind & IP_FREEBIND
  v4.7-rc7-1883-g9b974202 sctp: support ipv6 nonlocal bind
  v4.1-12247-g35a256fe ipv6: Nonlocal bind

Cc: Lorenzo Colitti <lorenzo@google.com>
Fixes: 83ba4645 ("net: add helpers checking if socket can be bound to nonlocal address")
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Reviewed-By: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

'struct ovs_zone_limit' has more members than initialized in
ovs_ct_limit_get_default_limit().  The rest of the memory is a random
kernel stack content that ends up being sent to userspace.

Fix that by using designated initializer that will clear all
non-specified fields.

Fixes: 11efd5cb ("openvswitch: Support conntrack zone limit")
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>