- 28 Oct, 2022 1 commit
-
-
Shengjiu Wang authored
These counter registers are part of register list, add them to complete the register map - DMAC counter control registers - Data path Timestamp counter register - Data path bit counter register - Data path bit count timestamp register - Data path bit read timestamp register Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1666940627-7611-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
- 26 Oct, 2022 35 commits
-
-
Mark Brown authored
Merge series from Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>: There is a typo which keeps propagating through existing Intel machine boards fix it with hope that fix stops it from appearing in new boards.
-
Mark Brown authored
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: This is the part1 of my HDaudio cleanups, before the addition of to-be-announced HDaudio extensions. The patchset includes more consistent use of read/write/update helpers, removal of useless waits, structure members and programming sequences, removal of confusing sharing of private_data between FE and BE. Additional patches are coming to split the controller, codec and multi-link management functionality in well-identified files. Pierre-Louis Bossart (16): ASoC: SOF: ops: fallback to mmio in helpers ASoC: SOF: Intel: use mmio fallback for all platforms ASoC: SOF: ops: add readb/writeb helpers ASoC: SOF: ops: add snd_sof_dsp_updateb() helper ASoC: SOF: Intel: hda-dsp: use SOF helpers for consistency ASoC: SOF: Intel: hda-dai: start removing the use of runtime->private_data in BE ASoC: SOF: Intel: hda-dai: use component_get_drvdata to find hdac_bus ASoC: SOF: Intel: hda-dai: remove useless members in hda_pipe_params ASoC: SOF: Intel: hda-ctrl: remove useless sleep ASoC: SOF: Intel: hda: always do a full reset ASoC: SOF: Intel: hda: remove useless check on GCTL ASoC: SOF: Intel: hda-stream: use SOF helpers for consistency ASoC: SOF: Intel: hda-stream: rename CL_SD_CTL registers as SD_CTL ASoC: SOF: Intel: hda: use SOF helper for consistency ASoC: SOF: Intel: hda-stream: use snd_sof_dsp_updateb() helper ASoC: SOF: Intel: hda-stream: use readb/writeb for stream registers sound/soc/sof/intel/bdw.c | 6 +--- sound/soc/sof/intel/byt.c | 12 ++----- sound/soc/sof/intel/hda-common-ops.c | 6 +--- sound/soc/sof/intel/hda-ctrl.c | 41 ++++++++-------------- sound/soc/sof/intel/hda-dai.c | 31 +++++++---------- sound/soc/sof/intel/hda-dsp.c | 12 ++++--- sound/soc/sof/intel/hda-loader-skl.c | 30 ++++++++-------- sound/soc/sof/intel/hda-loader.c | 4 +-- sound/soc/sof/intel/hda-stream.c | 47 ++++++++++++------------- sound/soc/sof/intel/hda.c | 5 ++- sound/soc/sof/intel/hda.h | 25 +++++++------- sound/soc/sof/intel/pci-tng.c | 6 +--- sound/soc/sof/ops.h | 51 ++++++++++++++++++++-------- sound/soc/sof/sof-priv.h | 4 +++ 14 files changed, 136 insertions(+), 144 deletions(-) -- 2.34.1 -
Mark Brown authored
Merge series from Aidan MacDonald <aidanmacdonald.0x0@gmail.com>: This series is a preparatory cleanup of the jz4740-i2s driver before adding support for a new SoC. The two improvements are lifting unnecessary restrictions on sample rates and formats -- the existing ones appear to be derived from the limitations of the JZ4740's internal codec and don't reflect the actual capabilities of the I2S controller. I'm unable to test the series on any JZ47xx SoCs, but I have tested on an X1000 (which is the SoC I'll be adding in a followup series).
-
Nícolas F. R. A. Prado authored
Commit 0adccaf1 ("ASoC: dt-bindings: rt5682: Add #sound-dai-cells") defined the sound-dai-cells property as 0. However, rt5682 has two DAIs, AIF1 and AIF2, and therefore should have sound-dai-cells set to 1. Fix it. Fixes: 0adccaf1 ("ASoC: dt-bindings: rt5682: Add #sound-dai-cells") Signed-off-by:
Nícolas F. R. A. Prado <nfraprado@collabora.com> Reviewed-by:
Chen-Yu Tsai <wenst@chromium.org> Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20221024220015.1759428-4-nfraprado@collabora.comSigned-off-by:
-
Nícolas F. R. A. Prado authored
The rt5682s codec is a DAI provider with two interfaces - AIF1 and AIF2 - and therefore should have a #sound-dai-cells property that is equal to 1. Add it. Acked-by:
-
Peter Ujfalusi authored
sof_ipc4_fw_parse_ext_man() can return negative error numbers which is not correct for the used size_t type. Change the return value to ssize_t and use the same type where the function is called. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Fixes: 73c091a2 ("ASoC: SOF: ipc4-loader: Support for loading external libraries") Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20221025132706.30356-1-peter.ujfalusi@linux.intel.comSigned-off-by:
-
Yong Zhi authored
Fix small cut-and-paste error in comment. Reviewed-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by:
Yong Zhi <yong.zhi@intel.com> Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20221024164350.234830-1-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Nícolas F. R. A. Prado authored
sound-dai is a standard property whose type is already set to phandle-array by sound-dai.yaml, so there's no need to set it (and wrongly so for headset-codec) in this binding. What should be set however is the maximum number of items, which for headset-codec should be 1. Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20221024230658.1772907-1-nfraprado@collabora.comSigned-off-by:
-
Amadeusz Sławiński authored
It keeps propagating through machine boards, fix it once and for all. Reviewed-by:
Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by:
Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Link: https://lore.kernel.org/r/20221024190841.31572-3-amadeuszx.slawinski@linux.intel.comSigned-off-by:
-
Amadeusz Sławiński authored
It keeps propagating through machine boards, fix it once and for all. Reviewed-by:
-
Aidan MacDonald authored
Move most of the DAI probe/remove logic into component ops. This makes things more consistent because the AIC clock is now managed solely from the component side. And it makes it easier to add codec switching support later on. Reviewed-by:
Paul Cercueil <paul@crapouillou.net> Signed-off-by:
Aidan MacDonald <aidanmacdonald.0x0@gmail.com> Link: https://lore.kernel.org/r/20221023143328.160866-10-aidanmacdonald.0x0@gmail.comSigned-off-by:
-
Aidan MacDonald authored
Move the component suspend/resume functions near the definition of the component driver to emphasize that they're unrelated to the DAI functions. Acked-by:
-
Aidan MacDonald authored
The I2S controller on JZ47xx SoCs doesn't impose restrictions on sample rate and the driver doesn't make any assumptions about it, so the DAI should advertise a continuous sample rate range. Acked-by:
-
Aidan MacDonald authored
The audio controller on JZ47xx SoCs can transfer 20- and 24-bit samples in the FIFO, so allow those formats to be used with the I2S driver. Although the FIFO doesn't care about the in-memory sample format, we only support 4-byte format variants because the DMA controller on these SoCs cannot transfer in 3-byte multiples. Reviewed-by:
-
Aidan MacDonald authored
Some purely cosmetic changes: line up all the macro values to make things easier to read and sort the includes alphabetically. Acked-by:
-
Aidan MacDonald authored
Get rid of a couple of macros and improve readability by using FIELD_PREP() and GENMASK() for the sample size setting. Acked-by:
-
Aidan MacDonald authored
The differences between register fields on different SoC versions can be abstracted away using the regmap field API. This is easier to understand and extend than comparisons based on the version ID. Since the version IDs are unused after this change, remove them at the same time, and remove unused macros. Reviewed-by:
-
Aidan MacDonald authored
Using regmap for accessing the AIC registers makes the driver a little easier to read, and later refactors can take advantage of regmap APIs to further simplify the driver. Reviewed-by:
-
Aidan MacDonald authored
On the JZ4740, there is a single bit that flushes (empties) both the transmit and receive FIFO. Later SoCs have independent flush bits for each FIFO. Independent FIFOs can be flushed before the snd_soc_dai_active() check because it won't disturb other active streams. This ensures that the FIFO we're about to use is always flushed before starting up. With shared FIFOs we can't do that because if another substream is active, flushing its FIFO would cause underrun errors. This also fixes a bug: since we were only setting the JZ4740's flush bit, which corresponds to the TX FIFO flush bit on other SoCs, other SoCs were not having their RX FIFO flushed at all. Fixes: 967beb2e ("ASoC: jz4740: Add jz4780 support") Reviewed-by:
-
Pierre-Louis Bossart authored
readb/writeb are used directly without any wrappers or references to the BAR, as usually done for other registers. Signed-off-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20221024165310.246183-17-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Pierre-Louis Bossart authored
No functionality change, only code consistency. Signed-off-by:
-
Pierre-Louis Bossart authored
No functionality change, just more consistency in the code. Signed-off-by:
-
Pierre-Louis Bossart authored
The use of the CL prefix is misleading. HDaudio streams are used for code loading since ApolloLake, but they are also used for regular audio transfers. No functionality change, pure rename. Signed-off-by:
-
Pierre-Louis Bossart authored
Not sure why we mixed sof and hdac helpers, this makes the code way less readable. Signed-off-by:
-
Pierre-Louis Bossart authored
Now that we always do a full reset, there's no point in checking if the controller is always out-of-reset. This is always true by construction. Signed-off-by:
-
Pierre-Louis Bossart authored
There's no point in checking for a full-reset condition that is always-true in the callers. Signed-off-by:
-
Pierre-Louis Bossart authored
The hda_dsp_ctrl_link_reset() already performs a usleep and a check that GCTL has been modified, there's no point in waiting more. Signed-off-by:
-
Pierre-Louis Bossart authored
Some settings were never or are no longer used, remove useless definitions and assignments. Signed-off-by:
-
Pierre-Louis Bossart authored
Remove the last usage of substream->runtime->private_data in the HDAudio BE hw_params. The SOF core saves the 'sdev' global context as component drvdata, and we already save the bus information in sdev. Signed-off-by:
-
Pierre-Louis Bossart authored
The SOF HDAudio code stores the Host DMA hdac_stream structure in the FE substream->runtime->private_data. The BE dailink also uses the substream->runtime->private_data to allocate the link DMA stream tag. This really works by accident: the DPCM core copies the FE runtime information in the BE, which has the side-effect of sharing the FE-specific private_data with the BE. To avoid more uses of the private_data with potential issues such as accessing stale information or use-after-free cases, this patch removes most of the usages of this private_data at the BE level. We can directly use the existing dma_data to access the relevant information. However the hw_params still uses the information, mainly to go back to the 'bus' structure required for the link dma stream tag allocation. This is safe in that the 'bus' is not stream or PCM specific. The next patch will completely remove this last use of private_data by using the component_drvdata - which is how SOF passes a global context around. Signed-off-by:
-
Pierre-Louis Bossart authored
No functionality change. Signed-off-by:
Rander Wang <rander.wang@intel.com> Reviewed-by:
-
Pierre-Louis Bossart authored
Add missing helper in SOF toolbox. Signed-off-by:
-
Pierre-Louis Bossart authored
These will be used to add more consistency in the SOF core and drivers. Signed-off-by:
-
Pierre-Louis Bossart authored
No need to expose an indirection when we can use the fallback. Signed-off-by:
-
Pierre-Louis Bossart authored
Returning an error when a read/write is not implemented makes no sense, especially on read where no return value makes sense. Change the logic to directly fallback to mmio. If a platform truly wants other read/writes that are not plain vanilla mmio, it needs to implement its own routines. Signed-off-by:
-
- 24 Oct, 2022 2 commits
-
-
Ban Tao authored
In configurations with CONFIG_OF=n, we get a harmless build warning: sound/soc/sunxi/sun50i-dmic.c:268:34: warning: unused variable 'sun50i_dmic_of_match' [-Wunused-const-variable] Signed-off-by:
Ban Tao <fengzheng923@gmail.com> Reported-by:
kernel test robot <lkp@intel.com> Acked-by:
Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/1666511085-2748-1-git-send-email-fengzheng923@gmail.comSigned-off-by:
-
Rob Herring authored
Convert the dmic-codec binding to DT schema format. The '#sound-dai-cells' and 'sound-name-prefix' properties were not documented, but are in use, so add them. Reviewed-by:
Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> Signed-off-by:
-
- 21 Oct, 2022 2 commits
-
-
Mark Brown authored
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>: In IPC4 all DSP loadable executable is a 'library' containing modules. The main or basefw is also a library which contains multiple modules. IPC4 allows to use loadable libraries to extend the functionality of the booted basefw. This series adds support for loading external libraries in case they are needed by the loaded topology file. The libraries must be placed to a specific firmware directory (fw_lib_prefix), which is: intel/avs-lib|sof-ipc4-lib/ followed by the platform name and in case of community key use a 'community' directory. For example for upx-i11 (community key): intel/avs-lib/tgl/community is the default path. The name of the library should be the UUID of the module it contains since the library loading is going to look for the file as <module_UUID>.bin In case there is a need to bundle multiple modules into single library, symlinks can be used to point to the file: module_boundle.bin <UUID1>.bin -> module_boundle.bin <UUID2>.bin -> module_boundle.bin <UUID3>.bin -> module_boundle.bin But note that in this case all modules will be loaded to the DSP since only the whole library can be loaded, not individual modules.
-
Peter Ujfalusi authored
In case the requested module is not available among the loaded libraries, try to load it as external library. The kernel will try to load the file from <fw_lib_prefix>/<module_uuid>.bin If the file found, then the ext manifest of it is parsed, placed it under XArray and the pointer to the module is returned to the caller. Releasing the firmware will be done on ipc cleanup time. Signed-off-by:
Chao Song <chao.song@intel.com> Reviewed-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20221020121238.18339-20-peter.ujfalusi@linux.intel.comSigned-off-by:
-
