- 22 May, 2018 27 commits
-
-
Masami Hiramatsu authored
commit eb0146da upstream. Prohibit kprobes on do_undefinstr because kprobes on arm is implemented by undefined instruction. This means if we probe do_undefinstr(), it can cause infinit recursive exception. Fixes: 24ba613c ("ARM kprobes: core code") Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ard Biesheuvel authored
commit 0b3225ab upstream. Mixed mode allows a kernel built for x86_64 to interact with 32-bit EFI firmware, but requires us to define all struct definitions carefully when it comes to pointer sizes. 'struct efi_pci_io_protocol_32' currently uses a 'void *' for the 'romimage' field, which will be interpreted as a 64-bit field on such kernels, potentially resulting in bogus memory references and subsequent crashes. Tested-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: <stable@vger.kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20180504060003.19618-13-ard.biesheuvel@linaro.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Dave Hansen authored
commit 2fa9d1cf upstream. mm_pkey_is_allocated() treats pkey 0 as unallocated. That is inconsistent with the manpages, and also inconsistent with mm->context.pkey_allocation_map. Stop special casing it and only disallow values that are actually bad (< 0). The end-user visible effect of this is that you can now use mprotect_pkey() to set pkey=0. This is a bit nicer than what Ram proposed[1] because it is simpler and removes special-casing for pkey 0. On the other hand, it does allow applications to pkey_free() pkey-0, but that's just a silly thing to do, so we are not going to protect against it. The scenario that could happen is similar to what happens if you free any other pkey that is in use: it might get reallocated later and used to protect some other data. The most likely scenario is that pkey-0 comes back from pkey_alloc(), an access-disable or write-disable bit is set in PKRU for it, and the next stack access will SIGSEGV. It's not horribly different from if you mprotect()'d your stack or heap to be unreadable or unwritable, which is generally very foolish, but also not explicitly prevented by the kernel. 1. http://lkml.kernel.org/r/1522112702-27853-1-git-send-email-linuxram@us.ibm.comSigned-off-by:
Dave Hansen <dave.hansen@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org>p Cc: Dave Hansen <dave.hansen@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael Ellermen <mpe@ellerman.id.au> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ram Pai <linuxram@us.ibm.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Cc: stable@vger.kernel.org Fixes: 58ab9a08 ("x86/pkeys: Check against max pkey to avoid overflows") Link: http://lkml.kernel.org/r/20180509171358.47FD785E@viggo.jf.intel.comSigned-off-by:
-
Dave Hansen authored
commit 0a0b1520 upstream. I got a bug report that the following code (roughly) was causing a SIGSEGV: mprotect(ptr, size, PROT_EXEC); mprotect(ptr, size, PROT_NONE); mprotect(ptr, size, PROT_READ); *ptr = 100; The problem is hit when the mprotect(PROT_EXEC) is implicitly assigned a protection key to the VMA, and made that key ACCESS_DENY|WRITE_DENY. The PROT_NONE mprotect() failed to remove the protection key, and the PROT_NONE-> PROT_READ left the PTE usable, but the pkey still in place and left the memory inaccessible. To fix this, we ensure that we always "override" the pkee at mprotect() if the VMA does not have execute-only permissions, but the VMA has the execute-only pkey. We had a check for PROT_READ/WRITE, but it did not work for PROT_NONE. This entirely removes the PROT_* checks, which ensures that PROT_NONE now works. Reported-by:
Shakeel Butt <shakeelb@google.com> Signed-off-by:
-
Martin Schwidefsky authored
commit 9f18fff6 upstream. The inline assembly to call __do_softirq on the irq stack uses an indirect branch. This can be replaced with a normal relative branch. Cc: stable@vger.kernel.org # 4.16 Fixes: f19fbd5e ("s390: introduce execute-trampolines for branches") Reviewed-by:
Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Julian Wiedmann authored
commit 2e68adcd upstream. Calling qdio_release_memory() on error is just plain wrong. It frees the main qdio_irq struct, when following code still uses it. Also, no other error path in qdio_establish() does this. So trust callers to clean up via qdio_free() if some step of the QDIO initialization fails. Fixes: 779e6e1c ("[S390] qdio: new qdio driver.") Cc: <stable@vger.kernel.org> #v2.6.27+ Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
-
Hendrik Brueckner authored
commit 4bbaf258 upstream. Correct a trinity finding for the perf_event_open() system call with a perf event attribute structure that uses a frequency but has the sampling frequency set to zero. This causes a FP divide exception during the sample rate initialization for the hardware sampling facility. Fixes: 8c069ff4 ("s390/perf: add support for the CPU-Measurement Sampling Facility") Cc: stable@vger.kernel.org # 3.14+ Reviewed-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by:
-
Julian Wiedmann authored
commit e5218134 upstream. Ever since CQ/QAOB support was added, calling qdio_free() straight after qdio_alloc() results in qdio_release_memory() accessing uninitialized memory (ie. q->u.out.use_cq and q->u.out.aobs). Followed by a kmem_cache_free() on the random AOB addresses. For older kernels that don't have 6e30c549, the same applies if qdio_establish() fails in the DEV_STATE_ONLINE check. While initializing q->u.out.use_cq would be enough to fix this particular bug, the more future-proof change is to just zero-alloc the whole struct. Fixes: 104ea556 ("qdio: support asynchronous delivery of storage blocks") Cc: <stable@vger.kernel.org> #v3.2+ Signed-off-by:
-
Pavel Tatashin authored
commit ab1e8d89 upstream. It is unsafe to do virtual to physical translations before mm_init() is called if struct page is needed in order to determine the memory section number (see SECTION_IN_PAGE_FLAGS). This is because only in mm_init() we initialize struct pages for all the allocated memory when deferred struct pages are used. My recent fix in commit c9e97a19 ("mm: initialize pages on demand during boot") exposed this problem, because it greatly reduced number of pages that are initialized before mm_init(), but the problem existed even before my fix, as Fengguang Wu found. Below is a more detailed explanation of the problem. We initialize struct pages in four places: 1. Early in boot a small set of struct pages is initialized to fill the first section, and lower zones. 2. During mm_init() we initialize "struct pages" for all the memory that is allocated, i.e reserved in memblock. 3. Using on-demand logic when pages are allocated after mm_init call (when memblock is finished) 4. After smp_init() when the rest free deferred pages are initialized. The problem occurs if we try to do va to phys translation of a memory between steps 1 and 2. Because we have not yet initialized struct pages for all the reserved pages, it is inherently unsafe to do va to phys if the translation itself requires access of "struct page" as in case of this combination: CONFIG_SPARSE && !CONFIG_SPARSE_VMEMMAP The following path exposes the problem: start_kernel() trap_init() setup_cpu_entry_areas() setup_cpu_entry_area(cpu) get_cpu_gdt_paddr(cpu) per_cpu_ptr_to_phys(addr) pcpu_addr_to_page(addr) virt_to_page(addr) pfn_to_page(__pa(addr) >> PAGE_SHIFT) We disable this path by not allowing NEED_PER_CPU_KM with deferred struct pages feature. The problems are discussed in these threads: http://lkml.kernel.org/r/20180418135300.inazvpxjxowogyge@wfg-t540p.sh.intel.com http://lkml.kernel.org/r/20180419013128.iurzouiqxvcnpbvz@wfg-t540p.sh.intel.com http://lkml.kernel.org/r/20180426202619.2768-1-pasha.tatashin@oracle.com Link: http://lkml.kernel.org/r/20180515175124.1770-1-pasha.tatashin@oracle.com Fixes: 3a80a7fa ("mm: meminit: initialise a subset of struct pages if CONFIG_DEFERRED_STRUCT_PAGE_INIT is set") Signed-off-by:
Pavel Tatashin <pasha.tatashin@oracle.com> Acked-by:
Michal Hocko <mhocko@suse.com> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Cc: Steven Sistare <steven.sistare@oracle.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Dennis Zhou <dennisszhou@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Nicholas Piggin authored
commit c1d2a313 upstream. Similarly to opal_event_shutdown, opal_nvram_write can be called in the crash path with irqs disabled. Special case the delay to avoid sleeping in invalid context. Fixes: 3b807033 ("powerpc/powernv: Fix OPAL NVRAM driver OPAL_BUSY loops") Cc: stable@vger.kernel.org # v3.2 Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Alexander Monakov authored
commit 06cb616b upstream. Not all revisions of DW I2C controller implement the enable status register. On platforms where that's the case (e.g. BG2CD and SPEAr ARM SoCs), waiting for enable will time out as reading the unimplemented register yields zero. It was observed that reading the IC_ENABLE_STATUS register once suffices to avoid getting it stuck on Bay Trail hardware, so replace polling with one dummy read of the register. Fixes: fba4adbb ("i2c: designware: must wait for enable") Signed-off-by:
Alexander Monakov <amonakov@ispras.ru> Tested-by:
Ben Gardner <gardner.ben@gmail.com> Acked-by:
Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org Signed-off-by:
-
Florian Westphal authored
commit 569ccae6 upstream. rules in nftables a free'd using kfree, but protected by rcu, i.e. we must wait for a grace period to elapse. Normal removal patch does this, but nf_tables_newrule() doesn't obey this rule during error handling. It calls nft_trans_rule_add() *after* linking rule, and, if that fails to allocate memory, it unlinks the rule and then kfree() it -- this is unsafe. Switch order -- first add rule to transaction list, THEN link it to public list. Note: nft_trans_rule_add() uses GFP_KERNEL; it will not fail so this is not a problem in practice (spotted only during code review). Fixes: 0628b123 ("netfilter: nfnetlink: add batch support and use it from nf_tables") Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Steven Rostedt (VMware) authored
commit 45dd9b06 upstream. Doing an audit of trace events, I discovered two trace events in the xen subsystem that use a hack to create zero data size trace events. This is not what trace events are for. Trace events add memory footprint overhead, and if all you need to do is see if a function is hit or not, simply make that function noinline and use function tracer filtering. Worse yet, the hack used was: __array(char, x, 0) Which creates a static string of zero in length. There's assumptions about such constructs in ftrace that this is a dynamic string that is nul terminated. This is not the case with these tracepoints and can cause problems in various parts of ftrace. Nuke the trace events! Link: http://lkml.kernel.org/r/20180509144605.5a220327@gandalf.local.home Cc: stable@vger.kernel.org Fixes: 95a7d768 ("xen/mmu: Use Xen specific TLB flush instead of the generic one.") Reviewed-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Waiman Long authored
commit c7be96af upstream. When running certain database workload on a high-end system with many CPUs, it was found that spinlock contention in the sigprocmask syscalls became a significant portion of the overall CPU cycles as shown below. 9.30% 9.30% 905387 dataserver /proc/kcore 0x7fff8163f4d2 [k] _raw_spin_lock_irq | ---_raw_spin_lock_irq | |--99.34%-- __set_current_blocked | sigprocmask | sys_rt_sigprocmask | system_call_fastpath | | | |--50.63%-- __swapcontext | | | | | |--99.91%-- upsleepgeneric | | | |--49.36%-- __setcontext | | ktskRun Looking further into the swapcontext function in glibc, it was found that the function always call sigprocmask() without checking if there are changes in the signal mask. A check was added to the __set_current_blocked() function to avoid taking the sighand->siglock spinlock if there is no change in the signal mask. This will prevent unneeded spinlock contention when many threads are trying to call sigprocmask(). With this patch applied, the spinlock contention in sigprocmask() was gone. Link: http://lkml.kernel.org/r/1474979209-11867-1-git-send-email-Waiman.Long@hpe.comSigned-off-by:
Waiman Long <Waiman.Long@hpe.com> Acked-by:
Oleg Nesterov <oleg@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Stas Sergeev <stsp@list.ru> Cc: Scott J Norton <scott.norton@hpe.com> Cc: Douglas Hatch <doug.hatch@hpe.com> Signed-off-by:
Mel Gorman <mgorman@suse.de> Signed-off-by:
-
Benjamin Herrenschmidt authored
commit 349524bc upstream. This causes warnings from cpufreq mutex code. This is also rather unnecessary and ineffective. If we really want to prevent concurrent unplug, we could take the unplug read lock but I don't see this being critical. Fixes: cd77b5ce ("powerpc/powernv/cpufreq: Fix the frequency read by /proc/cpuinfo") Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Michal Suchanek <msuchanek@suse.de> Signed-off-by:
-
Andre Przywara authored
commit bf308242 upstream. kvm_read_guest() will eventually look up in kvm_memslots(), which requires either to hold the kvm->slots_lock or to be inside a kvm->srcu critical section. In contrast to x86 and s390 we don't take the SRCU lock on every guest exit, so we have to do it individually for each kvm_read_guest() call. Provide a wrapper which does that and use that everywhere. Note that ending the SRCU critical section before returning from the kvm_read_guest() wrapper is safe, because the data has been *copied*, so we don't need to rely on valid references to the memslot anymore. Cc: Stable <stable@vger.kernel.org> # 4.8+ Reported-by:
Jan Glauber <jan.glauber@caviumnetworks.com> Signed-off-by:
Andre Przywara <andre.przywara@arm.com> Acked-by:
Christoffer Dall <christoffer.dall@arm.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Kamal Dasu authored
commit 602805fb upstream. Always confirm the BSPI_MAST_N_BOOT_CTRL bit when enabling or disabling BSPI transfers. Fixes: 4e3b2d23 ("spi: bcm-qspi: Add BSPI spi-nor flash controller driver") Signed-off-by:
Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Kamal Dasu authored
commit 5eb9a07a upstream. Added fix for probing of spi-nor device non-zero chip selects. Set MSPI_CDRAM_PCS (peripheral chip select) with spi master for MSPI controller and not for MSPI/BSPI spi-nor master controller. Ensure setting of cs bit in chip select register on chip select change. Fixes: fa236a7e ("spi: bcm-qspi: Add Broadcom MSPI driver") Signed-off-by:
-
Andy Shevchenko authored
commit efc4a137 upstream. Currently the 32-bit device address only is supported for DMA. However, starting from Intel Sunrisepoint PCH the DMA address of the device FIFO can be 64-bit. Change the respective variable to be compatible with DMA engine expectations, i.e. to phys_addr_t. Fixes: 34cadd9c ("spi: pxa2xx: Add support for Intel Sunrisepoint") Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Wenwen Wang authored
commit 3f12888d upstream. In snd_ctl_elem_add_compat(), the fields of the struct 'data' need to be copied from the corresponding fields of the struct 'data32' in userspace. This is achieved by invoking copy_from_user() and get_user() functions. The problem here is that the 'type' field is copied twice. One is by copy_from_user() and one is by get_user(). Given that the 'type' field is not used between the two copies, the second copy is *completely* redundant and should be removed for better performance and cleanup. Also, these two copies can cause inconsistent data: as the struct 'data32' resides in userspace and a malicious userspace process can race to change the 'type' field between the two copies to cause inconsistent data. Depending on how the data is used in the future, such an inconsistency may cause potential security risks. For above reasons, we should take out the second copy. Signed-off-by:
Wenwen Wang <wang6495@umn.edu> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Hans de Goede authored
commit c8beccc1 upstream. Power-saving is causing loud plops on the Lenovo C50 All in one, add it to the blacklist. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1572975Signed-off-by:
-
Federico Cuello authored
commit 21493316 upstream. Currently it's not possible to set volume lower than 26% (it just mutes). Also fixes this warning: Warning! Unlikely big volume range (=9472), cval->res is probably wrong. [13] FU [PCM Playback Volume] ch = 2, val = -9473/-1/1 , and volume works fine for full range. Signed-off-by:
Federico Cuello <fedux@fedux.com.ar> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Shuah Khan (Samsung OSG) authored
commit c171654c upstream. stub_probe() calls put_busid_priv() in an error path when device isn't found in the busid_table. Fix it by making put_busid_priv() safe to be called with null struct bus_id_priv pointer. This problem happens when "usbip bind" is run without loading usbip_host driver and then running modprobe. The first failed bind attempt unbinds the device from the original driver and when usbip_host is modprobed, stub_probe() runs and doesn't find the device in its busid table and calls put_busid_priv(0 with null bus_id_priv pointer. usbip-host 3-10.2: 3-10.2 is not in match_busid table... skip! [ 367.359679] ===================================== [ 367.359681] WARNING: bad unlock balance detected! [ 367.359683] 4.17.0-rc4+ #5 Not tainted [ 367.359685] ------------------------------------- [ 367.359688] modprobe/2768 is trying to release lock ( [ 367.359689] ================================================================== [ 367.359696] BUG: KASAN: null-ptr-deref in print_unlock_imbalance_bug+0x99/0x110 [ 367.359699] Read of size 8 at addr 0000000000000058 by task modprobe/2768 [ 367.359705] CPU: 4 PID: 2768 Comm: modprobe Not tainted 4.17.0-rc4+ #5 Fixes: 22076557 ("usbip: usbip_host: fix NULL-ptr deref and use-after-free errors") in usb-linus Signed-off-by:
Shuah Khan (Samsung OSG) <shuah@kernel.org> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Shuah Khan (Samsung OSG) authored
commit 22076557 upstream. usbip_host updates device status without holding lock from stub probe, disconnect and rebind code paths. When multiple requests to import a device are received, these unprotected code paths step all over each other and drive fails with NULL-ptr deref and use-after-free errors. The driver uses a table lock to protect the busid array for adding and deleting busids to the table. However, the probe, disconnect and rebind paths get the busid table entry and update the status without holding the busid table lock. Add a new finer grain lock to protect the busid entry. This new lock will be held to search and update the busid entry fields from get_busid_idx(), add_match_busid() and del_match_busid(). match_busid_show() does the same to access the busid entry fields. get_busid_priv() changed to return the pointer to the busid entry holding the busid lock. stub_probe(), stub_disconnect() and stub_device_rebind() call put_busid_priv() to release the busid lock before returning. This changes fixes the unprotected code paths eliminating the race conditions in updating the busid entries. Reported-by: Jakub Jirasek Signed-off-by:
-
Shuah Khan (Samsung OSG) authored
commit 7510df3f upstream. After removing usbip_host module, devices it releases are left without a driver. For example, when a keyboard or a mass storage device are bound to usbip_host when it is removed, these devices are no longer bound to any driver. Fix it to run device_attach() from the module exit routine to restore the devices to their original drivers. This includes cleanup changes and moving device_attach() code to a common routine to be called from rebind_store() and usbip_host_exit(). Signed-off-by:
-
Shuah Khan (Samsung OSG) authored
commit 1e180f16 upstream. Device is left in the busid_table after unbind and rebind. Rebind initiates usb bus scan and the original driver claims the device. After rescan the device should be deleted from the busid_table as it no longer belongs to usbip_host. Fix it to delete the device after device_attach() succeeds. Signed-off-by:
-
Shuah Khan authored
commit 28b68acc upstream. Refine probe and disconnect debug msgs to be useful and say what is in progress. Signed-off-by:
Shuah Khan <shuahkh@osg.samsung.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
- 19 May, 2018 13 commits
-
-
Greg Kroah-Hartman authored
-
zhongjiang authored
commit dd83c161 upstream. wait4(-2147483648, 0x20, 0, 0xdd0000) triggers: UBSAN: Undefined behaviour in kernel/exit.c:1651:9 The related calltrace is as follows: negation of -2147483648 cannot be represented in type 'int': CPU: 9 PID: 16482 Comm: zj Tainted: G B ---- ------- 3.10.0-327.53.58.71.x86_64+ #66 Hardware name: Huawei Technologies Co., Ltd. Tecal RH2285 /BC11BTSA , BIOS CTSAV036 04/27/2011 Call Trace: dump_stack+0x19/0x1b ubsan_epilogue+0xd/0x50 __ubsan_handle_negate_overflow+0x109/0x14e SyS_wait4+0x1cb/0x1e0 system_call_fastpath+0x16/0x1b Exclude the overflow to avoid the UBSAN warning. Link: http://lkml.kernel.org/r/1497264618-20212-1-git-send-email-zhongjiang@huawei.comSigned-off-by:
zhongjiang <zhongjiang@huawei.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Signed-off-by:
-
Jiri Slaby authored
commit d70ef228 upstream. sign_extend32 counts the sign bit parameter from 0, not from 1. So we have to use "11" for 12th bit, not "12". This mistake means we have not allowed negative op and cmp args since commit 30d6e0a4 ("futex: Remove duplicated code and fix undefined behaviour") till now. Fixes: 30d6e0a4 ("futex: Remove duplicated code and fix undefined behaviour") Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Darren Hart <dvhart@infradead.org> Signed-off-by:
-
Willy Tarreau authored
commit 7f7ccc2c upstream. proc_pid_cmdline_read() and environ_read() directly access the target process' VM to retrieve the command line and environment. If this process remaps these areas onto a file via mmap(), the requesting process may experience various issues such as extra delays if the underlying device is slow to respond. Let's simply refuse to access file-backed areas in these functions. For this we add a new FOLL_ANON gup flag that is passed to all calls to access_remote_vm(). The code already takes care of such failures (including unmapped areas). Accesses via /proc/pid/mem were not changed though. This was assigned CVE-2018-1120. Note for stable backports: the patch may apply to kernels prior to 4.11 but silently miss one location; it must be checked that no call to access_remote_vm() keeps zero as the last argument. Reported-by:
Qualys Security Advisory <qsa@qualys.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
Willy Tarreau <w@1wt.eu> Signed-off-by:
-
Jakub Kicinski authored
commit 46f1c52e upstream. TX completion may happen any time after HW queue was kicked. We can't access the skb afterwards. Move the time stamping before ringing the doorbell. Fixes: 4c352362 ("net: add driver for Netronome NFP4000/NFP6000 NIC VFs") Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by:
-
James Chapman authored
commit de3b58bc upstream. Revert commit 820da535 ("l2tp: fix missing print session offset info"). The peer_offset parameter is removed. Signed-off-by:
James Chapman <jchapman@katalix.com> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit c53c4ad9 which was commit 79935915 upstream. As Ben points out: This depends on: commit 570c70a6 Author: Fabio Estevam <fabio.estevam@nxp.com> Date: Wed Apr 5 11:32:34 2017 -0300 ASoC: sgtl5000: Allow LRCLK pad drive strength to be changed which did not show up until 4.13, so this makes no sense to have in this stable branch. Reported-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
-
Vasily Averin authored
commit 3a2b19d1 upstream. Commit efda760f ("lockd: fix lockd shutdown race") is incorrect, it removes lockd_manager and disarm grace_period_end for init_net only. If nfsd was started from another net namespace lockd_up_net() calls set_grace_period() that adds lockd_manager into per-netns list and queues grace_period_end delayed work. These action should be reverted in lockd_down_net(). Otherwise it can lead to double list_add on after restart nfsd in netns, and to use-after-free if non-disarmed delayed work will be executed after netns destroy. Fixes: efda760f ("lockd: fix lockd shutdown race") Cc: stable@vger.kernel.org Signed-off-by:
Vasily Averin <vvs@virtuozzo.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Antony Antony authored
commit 75bf50f4 upstream. copy geniv when cloning the xfrm state. x->geniv was not copied to the new state and migration would fail. xfrm_do_migrate .. xfrm_state_clone() .. .. esp_init_aead() crypto_alloc_aead() crypto_alloc_tfm() crypto_find_alg() return EAGAIN and failed Signed-off-by:
Antony Antony <antony@phenome.org> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Jiri Slaby authored
commit 30d6e0a4 upstream. There is code duplicated over all architecture's headers for futex_atomic_op_inuser. Namely op decoding, access_ok check for uaddr, and comparison of the result. Remove this duplication and leave up to the arches only the needed assembly which is now in arch_futex_atomic_op_inuser. This effectively distributes the Will Deacon's arm64 fix for undefined behaviour reported by UBSAN to all architectures. The fix was done in commit 5f16a046 (arm64: futex: Fix undefined behaviour with FUTEX_OP_OPARG_SHIFT usage). Look there for an example dump. And as suggested by Thomas, check for negative oparg too, because it was also reported to cause undefined behaviour report. Note that s390 removed access_ok check in d12a2970 ("s390/uaccess: remove pointless access_ok() checks") as access_ok there returns true. We introduce it back to the helper for the sake of simplicity (it gets optimized away anyway). Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
Darren Hart (VMware) <dvhart@infradead.org> Reviewed-by: Will Deacon <will.deacon@arm.com> [core/arm64] Cc: linux-mips@linux-mips.org Cc: Rich Felker <dalias@libc.org> Cc: linux-ia64@vger.kernel.org Cc: linux-sh@vger.kernel.org Cc: peterz@infradead.org Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: sparclinux@vger.kernel.org Cc: Jonas Bonn <jonas@southpole.se> Cc: linux-s390@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: linux-hexagon@vger.kernel.org Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: linux-snps-arc@lists.infradead.org Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: linux-xtensa@linux-xtensa.org Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: openrisc@lists.librecores.org Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Stafford Horne <shorne@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Richard Henderson <rth@twiddle.net> Cc: Chris Zankel <chris@zankel.net> Cc: Michal Simek <monstr@monstr.eu> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-parisc@vger.kernel.org Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: linux-alpha@vger.kernel.org Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: "David S. Miller" <davem@davemloft.net> Link: http://lkml.kernel.org/r/20170824073105.3901-1-jslaby@suse.cz Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Alexey Khoroshilov authored
commit c9126143 upstream. sccnxp_probe() returns result of regulator_disable() that may lead to returning zero, while device is not properly initialized. Also the driver enables clocks, but it does not disable it. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Xin Long authored
[ Upstream commit 59d8d443 ] Now sctp only delays the authentication for the normal cookie-echo chunk by setting chunk->auth_chunk in sctp_endpoint_bh_rcv(). But for the duplicated one with auth, in sctp_assoc_bh_rcv(), it does authentication first based on the old asoc, which will definitely fail due to the different auth info in the old asoc. The duplicated cookie-echo chunk will create a new asoc with the auth info from this chunk, and the authentication should also be done with the new asoc's auth info for all of the collision 'A', 'B' and 'D'. Otherwise, the duplicated cookie-echo chunk with auth will never pass the authentication and create the new connection. This issue exists since very beginning, and this fix is to make sctp_assoc_bh_rcv() follow the way sctp_endpoint_bh_rcv() does for the normal cookie-echo chunk to delay the authentication. While at it, remove the unused params from sctp_sf_authenticate() and define sctp_auth_chunk_verify() used for all the places that do the delayed authentication. v1->v2: fix the typo in changelog as Marcelo noticed. Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit ce402f04 ] When auth is enabled for cookie-ack chunk, in sctp_inq_pop, sctp processes auth chunk first, then continues to the next chunk in this packet if chunk_end + chunk_hdr size < skb_tail_pointer(). Otherwise, it will go to the next packet or discard this chunk. However, it missed the fact that cookie-ack chunk's size is equal to chunk_hdr size, which couldn't match that check, and thus this chunk would not get processed. This patch fixes it by changing the check to chunk_end + chunk_hdr size <= skb_tail_pointer(). Fixes: 26b87c78 ("net: sctp: fix remote memory pressure from excessive queueing") Signed-off-by:
-
