- 21 Jun, 2021 11 commits
-
-
Darrick J. Wong authored
It's currently unlikely that we will ever end up with more than 4 billion inodes waiting for reclamation, but the fs object code uses long int for object counts and we're certainly capable of generating that many. Instead of truncating the internal counters, widen them and report the object counts correctly. Signed-off-by:
Darrick J. Wong <djwong@kernel.org> Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by:
Dave Chinner <dchinner@redhat.com>
-
Darrick J. Wong authored
During review of the v6 deferred inode inactivation patchset[1], Dave commented that _cache_hit should have a clear separation between inode selection criteria and actions performed on a selected inode. Move a hunk to make this true, and compact the shrink cases in the function. [1] https://lore.kernel.org/linux-xfs/162310469340.3465262.504398465311182657.stgit@locust/T/#mca6d958521cb88bbc1bfe1a30767203328d410b5Signed-off-by:
Brian Foster <bfoster@redhat.com>
-
Darrick J. Wong authored
Hoist the code in xfs_iget_cache_hit that restores the VFS inode state to an xfs_inode that was previously vfs-destroyed. The next patch will add a new set of state flags, so we need the helper to avoid duplication. Signed-off-by:
-
Dave Chinner authored
For the DEBUGS! Signed-off-by:
-
Dave Chinner authored
In doing an investigation into AIL push stalls, I was looking at the log force code to see if an async CIL push could be done instead. This lead me to xfs_log_force_lsn() and looking at how it works. xfs_log_force_lsn() is only called from inode synchronisation contexts such as fsync(), and it takes the ip->i_itemp->ili_last_lsn value as the LSN to sync the log to. This gets passed to xlog_cil_force_lsn() via xfs_log_force_lsn() to flush the CIL to the journal, and then used by xfs_log_force_lsn() to flush the iclogs to the journal. The problem is that ip->i_itemp->ili_last_lsn does not store a log sequence number. What it stores is passed to it from the ->iop_committing method, which is called by xfs_log_commit_cil(). The value this passes to the iop_committing method is the CIL context sequence number that the item was committed to. As it turns out, xlog_cil_force_lsn() converts the sequence to an actual commit LSN for the related context and returns that to xfs_log_force_lsn(). xfs_log_force_lsn() overwrites it's "lsn" variable that contained a sequence with an actual LSN and then uses that to sync the iclogs. This caused me some confusion for a while, even though I originally wrote all this code a decade ago. ->iop_committing is only used by a couple of log item types, and only inode items use the sequence number it is passed. Let's clean up the API, CIL structures and inode log item to call it a sequence number, and make it clear that the high level code is using CIL sequence numbers and not on-disk LSNs for integrity synchronisation purposes. Signed-off-by:
Allison Henderson <allison.henderson@oracle.com> Signed-off-by:
-
Dave Chinner authored
A hang with tasks stuck on the CIL hard throttle was reported and largely diagnosed by Donald Buczek, who discovered that it was a result of the CIL context space usage decrementing in committed transactions once the hard throttle limit had been hit and processes were already blocked. This resulted in the CIL push not waking up those waiters because the CIL context was no longer over the hard throttle limit. The surprising aspect of this was the CIL space usage going backwards regularly enough to trigger this situation. Assumptions had been made in design that the relogging process would only increase the size of the objects in the CIL, and so that space would only increase. This change and commit message fixes the issue and documents the result of an audit of the triggers that can cause the CIL space to go backwards, how large the backwards steps tend to be, the frequency in which they occur, and what the impact on the CIL accounting code is. Even though the CIL ctx->space_used can go backwards, it will only do so if the log item is already logged to the CIL and contains a space reservation for it's entire logged state. This is tracked by the shadow buffer state on the log item. If the item is not previously logged in the CIL it has no shadow buffer nor log vector, and hence the entire size of the logged item copied to the log vector is accounted to the CIL space usage. i.e. it will always go up in this case. If the item has a log vector (i.e. already in the CIL) and the size decreases, then the existing log vector will be overwritten and the space usage will go down. This is the only condition where the space usage reduces, and it can only occur when an item is already tracked in the CIL. Hence we are safe from CIL space usage underruns as a result of log items decreasing in size when they are relogged. Typically this reduction in CIL usage occurs from metadata blocks being free, such as when a btree block merge occurs or a directory enter/xattr entry is removed and the da-tree is reduced in size. This generally results in a reduction in size of around a single block in the CIL, but also tends to increase the number of log vectors because the parent and sibling nodes in the tree needs to be updated when a btree block is removed. If a multi-level merge occurs, then we see reduction in size of 2+ blocks, but again the log vector count goes up. The other vector is inode fork size changes, which only log the current size of the fork and ignore the previously logged size when the fork is relogged. Hence if we are removing items from the inode fork (dir/xattr removal in shortform, extent record removal in extent form, etc) the relogged size of the inode for can decrease. No other log items can decrease in size either because they are a fixed size (e.g. dquots) or they cannot be relogged (e.g. relogging an intent actually creates a new intent log item and doesn't relog the old item at all.) Hence the only two vectors for CIL context size reduction are relogging inode forks and marking buffers active in the CIL as stale. Long story short: the majority of the code does the right thing and handles the reduction in log item size correctly, and only the CIL hard throttle implementation is problematic and needs fixing. This patch makes that fix, as well as adds comments in the log item code that result in items shrinking in size when they are relogged as a clear reminder that this can and does happen frequently. The throttle fix is based upon the change Donald proposed, though it goes further to ensure that once the throttle is activated, it captures all tasks until the CIL push issues a wakeup, regardless of whether the CIL space used has gone back under the throttle threshold. This ensures that we prevent tasks reducing the CIL slightly under the throttle threshold and then making more changes that push it well over the throttle limit. This is acheived by checking if the throttle wait queue is already active as a condition of throttling. Hence once we start throttling, we continue to apply the throttle until the CIL context push wakes everything on the wait queue. We can use waitqueue_active() for the waitqueue manipulations and checks as they are all done under the ctx->xc_push_lock. Hence the waitqueue has external serialisation and we can safely peek inside the wait queue without holding the internal waitqueue locks. Many thanks to Donald for his diagnostic and analysis work to isolate the cause of this hang. Reported-and-tested-by:
Donald Buczek <buczek@molgen.mpg.de> Signed-off-by:
-
Dave Chinner authored
Currently every journal IO is issued as REQ_PREFLUSH | REQ_FUA to guarantee the ordering requirements the journal has w.r.t. metadata writeback. THe two ordering constraints are: 1. we cannot overwrite metadata in the journal until we guarantee that the dirty metadata has been written back in place and is stable. 2. we cannot write back dirty metadata until it has been written to the journal and guaranteed to be stable (and hence recoverable) in the journal. The ordering guarantees of #1 are provided by REQ_PREFLUSH. This causes the journal IO to issue a cache flush and wait for it to complete before issuing the write IO to the journal. Hence all completed metadata IO is guaranteed to be stable before the journal overwrites the old metadata. The ordering guarantees of #2 are provided by the REQ_FUA, which ensures the journal writes do not complete until they are on stable storage. Hence by the time the last journal IO in a checkpoint completes, we know that the entire checkpoint is on stable storage and we can unpin the dirty metadata and allow it to be written back. This is the mechanism by which ordering was first implemented in XFS way back in 2002 by commit 95d97c36e5155075ba2eb22b17562cfcc53fcf96 ("Add support for drive write cache flushing") in the xfs-archive tree. A lot has changed since then, most notably we now use delayed logging to checkpoint the filesystem to the journal rather than write each individual transaction to the journal. Cache flushes on journal IO are necessary when individual transactions are wholly contained within a single iclog. However, CIL checkpoints are single transactions that typically span hundreds to thousands of individual journal writes, and so the requirements for device cache flushing have changed. That is, the ordering rules I state above apply to ordering of atomic transactions recorded in the journal, not to the journal IO itself. Hence we need to ensure metadata is stable before we start writing a new transaction to the journal (guarantee #1), and we need to ensure the entire transaction is stable in the journal before we start metadata writeback (guarantee #2). Hence we only need a REQ_PREFLUSH on the journal IO that starts a new journal transaction to provide #1, and it is not on any other journal IO done within the context of that journal transaction. The CIL checkpoint already issues a cache flush before it starts writing to the log, so we no longer need the iclog IO to issue a REQ_REFLUSH for us. Hence if XLOG_START_TRANS is passed to xlog_write(), we no longer need to mark the first iclog in the log write with REQ_PREFLUSH for this case. As an added bonus, this ordering mechanism works for both internal and external logs, meaning we can remove the explicit data device cache flushes from the iclog write code when using external logs. Given the new ordering semantics of commit records for the CIL, we need iclogs containing commit records to issue a REQ_PREFLUSH. We also require unmount records to do this. Hence for both XLOG_COMMIT_TRANS and XLOG_UNMOUNT_TRANS xlog_write() calls we need to mark the first iclog being written with REQ_PREFLUSH. For both commit records and unmount records, we also want them immediately on stable storage, so we want to also mark the iclogs that contain these records to be marked REQ_FUA. That means if a record is split across multiple iclogs, they are all marked REQ_FUA and not just the last one so that when the transaction is completed all the parts of the record are on stable storage. And for external logs, unmount records need a pre-write data device cache flush similar to the CIL checkpoint cache pre-flush as the internal iclog write code does not do this implicitly anymore. As an optimisation, when the commit record lands in the same iclog as the journal transaction starts, we don't need to wait for anything and can simply use REQ_FUA to provide guarantee #2. This means that for fsync() heavy workloads, the cache flush behaviour is completely unchanged and there is no degradation in performance as a result of optimise the multi-IO transaction case. The most notable sign that there is less IO latency on my test machine (nvme SSDs) is that the "noiclogs" rate has dropped substantially. This metric indicates that the CIL push is blocking in xlog_get_iclog_space() waiting for iclog IO completion to occur. With 8 iclogs of 256kB, the rate is appoximately 1 noiclog event to every 4 iclog writes. IOWs, every 4th call to xlog_get_iclog_space() is blocking waiting for log IO. With the changes in this patch, this drops to 1 noiclog event for every 100 iclog writes. Hence it is clear that log IO is completing much faster than it was previously, but it is also clear that for large iclog sizes, this isn't the performance limiting factor on this hardware. With smaller iclogs (32kB), however, there is a substantial difference. With the cache flush modifications, the journal is now running at over 4000 write IOPS, and the journal throughput is largely identical to the 256kB iclogs and the noiclog event rate stays low at about 1:50 iclog writes. The existing code tops out at about 2500 IOPS as the number of cache flushes dominate performance and latency. The noiclog event rate is about 1:4, and the performance variance is quite large as the journal throughput can fall to less than half the peak sustained rate when the cache flush rate prevents metadata writeback from keeping up and the log runs out of space and throttles reservations. As a result: logbsize fsmark create rate rm -rf before 32kb 152851+/-5.3e+04 5m28s patched 32kb 221533+/-1.1e+04 5m24s before 256kb 220239+/-6.2e+03 4m58s patched 256kb 228286+/-9.2e+03 5m06s The rm -rf times are included because I ran them, but the differences are largely noise. This workload is largely metadata read IO latency bound and the changes to the journal cache flushing doesn't really make any noticable difference to behaviour apart from a reduction in noiclog events from background CIL pushing. Signed-off-by: -
Dave Chinner authored
The CIL push is the only call to xlog_write that sets this variable to true. The other callers don't need a start rec, and they tell xlog_write what to do by passing the type of ophdr they need written in the flags field. The need_start_rec parameter essentially tells xlog_write to to write an extra ophdr with a XLOG_START_TRANS type, so get rid of the variable to do this and pass XLOG_START_TRANS as the flag value into xlog_write() from the CIL push. $ size fs/xfs/xfs_log.o* text data bss dec hex filename 27595 560 8 28163 6e03 fs/xfs/xfs_log.o.orig 27454 560 8 28022 6d76 fs/xfs/xfs_log.o.patched Signed-off-by:
-
Dave Chinner authored
Currently every journal IO is issued as REQ_PREFLUSH | REQ_FUA to guarantee the ordering requirements the journal has w.r.t. metadata writeback. THe two ordering constraints are: 1. we cannot overwrite metadata in the journal until we guarantee that the dirty metadata has been written back in place and is stable. 2. we cannot write back dirty metadata until it has been written to the journal and guaranteed to be stable (and hence recoverable) in the journal. These rules apply to the atomic transactions recorded in the journal, not to the journal IO itself. Hence we need to ensure metadata is stable before we start writing a new transaction to the journal (guarantee #1), and we need to ensure the entire transaction is stable in the journal before we start metadata writeback (guarantee #2). The ordering guarantees of #1 are currently provided by REQ_PREFLUSH being added to every iclog IO. This causes the journal IO to issue a cache flush and wait for it to complete before issuing the write IO to the journal. Hence all completed metadata IO is guaranteed to be stable before the journal overwrites the old metadata. However, for long running CIL checkpoints that might do a thousand journal IOs, we don't need every single one of these iclog IOs to issue a cache flush - the cache flush done before the first iclog is submitted is sufficient to cover the entire range in the log that the checkpoint will overwrite because the CIL space reservation guarantees the tail of the log (completed metadata) is already beyond the range of the checkpoint write. Hence we only need a full cache flush between closing off the CIL checkpoint context (i.e. when the push switches it out) and issuing the first journal IO. Rather than plumbing this through to the journal IO, we can start this cache flush the moment the CIL context is owned exclusively by the push worker. The cache flush can be in progress while we process the CIL ready for writing, hence reducing the latency of the initial iclog write. This is especially true for large checkpoints, where we might have to process hundreds of thousands of log vectors before we issue the first iclog write. In these cases, it is likely the cache flush has already been completed by the time we have built the CIL log vector chain. Signed-off-by:
-
Dave Chinner authored
The new checkpoint cache flush mechanism requires us to issue an unconditional cache flush before we start a new checkpoint. We don't want to block for this if we can help it, and we have a fair chunk of CPU work to do between starting the checkpoint and issuing the first journal IO. Hence it makes sense to amortise the latency cost of the cache flush by issuing it asynchronously and then waiting for it only when we need to issue the first IO in the transaction. To do this, we need async cache flush primitives to submit the cache flush bio and to wait on it. The block layer has no such primitives for filesystems, so roll our own for the moment. Signed-off-by:
-
Dave Chinner authored
It's a one line wrapper around blkdev_issue_flush(). Just replace it with direct calls to blkdev_issue_flush(). Signed-off-by:
-
- 18 Jun, 2021 6 commits
-
-
Dave Chinner authored
To allow for iclog IO device cache flush behaviour to be optimised, we first need to separate out the commit record iclog IO from the rest of the checkpoint so we can wait for the checkpoint IO to complete before we issue the commit record. This separation is only necessary if the commit record is being written into a different iclog to the start of the checkpoint as the upcoming cache flushing changes requires completion ordering against the other iclogs submitted by the checkpoint. If the entire checkpoint and commit is in the one iclog, then they are both covered by the one set of cache flush primitives on the iclog and hence there is no need to separate them for ordering. Otherwise, we need to wait for all the previous iclogs to complete so they are ordered correctly and made stable by the REQ_PREFLUSH that the commit record iclog IO issues. This guarantees that if a reader sees the commit record in the journal, they will also see the entire checkpoint that commit record closes off. This also provides the guarantee that when the commit record IO completes, we can safely unpin all the log items in the checkpoint so they can be written back because the entire checkpoint is stable in the journal. Signed-off-by:
-
Geert Uytterhoeven authored
On 32-bit (e.g. m68k): ERROR: modpost: "__udivdi3" [fs/xfs/xfs.ko] undefined! Fix this by using a uint32_t intermediate, like before. Reported-by: noreply@ellerman.id.au Fixes: 7660a5b48fbef958 ("xfs: log stripe roundoff is a property of the log") Signed-off-by:Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by:
-
Dave Chinner authored
We don't need to look at the xfs_mount and superblock every time we need to do an iclog roundoff calculation. The property is fixed for the life of the log, so store the roundoff in the log at mount time and use that everywhere. On a debug build: $ size fs/xfs/xfs_log.o.* text data bss dec hex filename 27360 560 8 27928 6d18 fs/xfs/xfs_log.o.orig 27219 560 8 27787 6c8b fs/xfs/xfs_log.o.patched Signed-off-by:
-
Shaokun Zhang authored
'error' will be initialized, so clean up the redundant initialization. Cc: "Darrick J. Wong" <djwong@kernel.org> Signed-off-by:
Shaokun Zhang <zhangshaokun@hisilicon.com> Reviewed-by:
-
Dave Chinner authored
Dan Carpenter's static checker reported: The patch 7b13c515: "xfs: use perag for ialloc btree cursors" from Jun 2, 2021, leads to the following Smatch complaint: fs/xfs/libxfs/xfs_ialloc.c:2403 xfs_imap() error: we previously assumed 'pag' could be null (see line 2294) And it's right. Fix it. Fixes: 7b13c515 ("xfs: use perag for ialloc btree cursors") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Darrick J. Wong authored
Merge tag 'xfs-delay-ready-attrs-v20.1' of https://github.com/allisonhenderson/xfs_work into xfs-5.14-merge4 xfs: Delay Ready Attributes Hi all, This set is a subset of a larger series for Dealyed Attributes. Which is a subset of a yet larger series for parent pointers. Delayed attributes allow attribute operations (set and remove) to be logged and committed in the same way that other delayed operations do. This allows more complex operations (like parent pointers) to be broken up into multiple smaller transactions. To do this, the existing attr operations must be modified to operate as a delayed operation. This means that they cannot roll, commit, or finish transactions. Instead, they return -EAGAIN to allow the calling function to handle the transaction. In this series, we focus on only the delayed attribute portion. We will introduce parent pointers in a later set. The set as a whole is a bit much to digest at once, so I usually send out the smaller sub series to reduce reviewer burn out. But the entire extended series is visible through the included github links. Updates since v19: Added Darricks fix for the remote block accounting as well as some minor nits about the default assert in xfs_attr_set_iter. Spent quite a bit of time testing this cycle to weed out any more unexpected bugs. No new test failures were observed with the addition of this set. xfs: Fix default ASSERT in xfs_attr_set_iter Replaced the assert with ASSERT(0); xfs: Add delay ready attr remove routines Added Darricks fix for remote block accounting This series can be viewed on github here: https://github.com/allisonhenderson/xfs_work/tree/delay_ready_attrs_v20 As well as the extended delayed attribute and parent pointer series: https://github.com/allisonhenderson/xfs_work/tree/delay_ready_attrs_v20_extended And the test cases: https://github.com/allisonhenderson/xfs_work/tree/pptr_xfstestsv3 In order to run the test cases, you will need have the corresponding xfsprogs changes as well. Which can be found here: https://github.com/allisonhenderson/xfs_work/tree/delay_ready_attrs_xfsprogs_v20 https://github.com/allisonhenderson/xfs_work/tree/delay_ready_attrs_xfsprogs_v20_extended To run the xfs attributes tests run: check -g attr To run as delayed attributes run: export MOUNT_OPTIONS="-o delattr" check -g attr To run parent pointer tests: check -g parent I've also made the corresponding updates to the user space side as well, and ported anything they need to seat correctly. Questions, comment and feedback appreciated! Thanks all! Allison * tag 'xfs-delay-ready-attrs-v20.1' of https://github.com/allisonhenderson/xfs_work: xfs: Make attr name schemes consistent xfs: Fix default ASSERT in xfs_attr_set_iter xfs: Clean up xfs_attr_node_addname_clear_incomplete xfs: Remove xfs_attr_rmtval_set xfs: Add delay ready attr set routines xfs: Add delay ready attr remove routines xfs: Hoist node transaction handling xfs: Hoist xfs_attr_leaf_addname xfs: Hoist xfs_attr_node_addname xfs: Add helper xfs_attr_node_addname_find_attr xfs: Separate xfs_attr_node_addname and xfs_attr_node_addname_clear_incomplete xfs: Refactor xfs_attr_set_shortform xfs: Add xfs_attr_node_remove_name xfs: Reverse apply 72b97ea4
-
- 09 Jun, 2021 2 commits
-
-
Allison Henderson authored
This patch renames the following functions to make the nameing scheme more consistent: xfs_attr_shortform_remove -> xfs_attr_sf_removename xfs_attr_node_remove_name -> xfs_attr_node_removename xfs_attr_set_fmt -> xfs_attr_sf_addname Suggested-by:
-
Allison Henderson authored
This ASSERT checks for the state value of RM_SHRINK in the set path which should never happen. Change to ASSERT(0); Suggested-by:
-
- 08 Jun, 2021 13 commits
-
-
Darrick J. Wong authored
Merge tag 'rename-eofblocks-5.14_2021-06-08' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-5.14-merge2 xfs: rename struct xfs_eofblocks In the old days, struct xfs_eofblocks was an optional parameter to the speculative post-EOF allocation garbage collector to narrow the scope of a scan to files fitting specific criteria. Nowadays it is used for all other kinds of inode cache walks (reclaim, quotaoff, inactivation), so the name is no longer fitting. Change the flag namespace and rename the structure to something more appropriate for what it does. v2: separate the inode cache walk flag namespace from eofblocks * tag 'rename-eofblocks-5.14_2021-06-08' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux: xfs: rename struct xfs_eofblocks to xfs_icwalk xfs: change the prefix of XFS_EOF_FLAGS_* to XFS_ICWALK_FLAG_
-
Darrick J. Wong authored
Merge tag 'fix-inode-health-reports-5.14_2021-06-08' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-5.14-merge2 xfs: preserve inode health reports for longer This is a quick series to make sure that inode sickness reports stick around in memory for some amount of time. v2: rebase to 5.13-rc4 v3: require explicit request to reclaim sick inodes, drop weird icache miss interaction with DONTCACHE * tag 'fix-inode-health-reports-5.14_2021-06-08' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux: xfs: selectively keep sick inodes in memory xfs: drop IDONTCACHE on inodes when we mark them sick xfs: only reset incore inode health state flags when reclaiming an inode
-
Darrick J. Wong authored
The xfs_eofblocks structure is no longer well-named -- nowadays it provides optional filtering criteria to any walk of the incore inode cache. Only one of the cache walk goals has anything to do with clearing of speculative post-EOF preallocations, so change the name to be more appropriate. Signed-off-by:
-
Darrick J. Wong authored
It's important that the filesystem retain its memory of sick inodes for a little while after problems are found so that reports can be collected about what was wrong. Don't let inode reclamation free sick inodes unless we're unmounting or the fs already went down. Signed-off-by:
Carlos Maiolino <cmaiolino@redhat.com>
-
Darrick J. Wong authored
In preparation for renaming struct xfs_eofblocks to struct xfs_icwalk, change the prefix of the existing XFS_EOF_FLAGS_* flags to XFS_ICWALK_FLAG_ and convert all the existing users. This adds a degree of interface separation between the ioctl definitions and the incore parameters. Since FLAGS_UNION is only used in xfs_icache.c, move it there as a private flag. Signed-off-by:
-
Darrick J. Wong authored
When we decide to mark an inode sick, clear the DONTCACHE flag so that the incore inode will be kept around until memory pressure forces it out of memory. This increases the chances that the sick status will be caught by someone compiling a health report later on. Signed-off-by:
-
Darrick J. Wong authored
While running some fuzz tests on inode metadata, I noticed that the filesystem health report (as provided by xfs_spaceman) failed to report the file corruption even when spaceman was run immediately after running xfs_scrub to detect the corruption. That isn't the intended behavior; one ought to be able to run scrub to detect errors in the ondisk metadata and be able to access to those reports for some time after the scrub. After running the same sequence through an instrumented kernel, I discovered the reason why -- scrub igets the file, scans it, marks it sick, and ireleases the inode. When the VFS lets go of the incore inode, it moves to RECLAIMABLE state. If spaceman igets the incore inode before it moves to RECLAIM state, iget reinitializes the VFS state, clears the sick and checked masks, and hands back the inode. At this point, the caller has the exact same incore inode, but with all the health state erased. In other words, we're erasing the incore inode's health state flags when we've decided NOT to sever the link between the incore inode and the ondisk inode. This is wrong, so we need to remove the lines that zero the fields from xfs_iget_cache_hit. As a precaution, we add the same lines into xfs_reclaim_inode just after we sever the link between incore and ondisk inode. Strictly speaking this isn't necessary because once an inode has gone through reclaim it must go through xfs_inode_alloc (which also zeroes the state) and xfs_iget is careful to check for mismatches between the inode it pulls out of the radix tree and the one it wants. Fixes: 6772c1f1 ("xfs: track metadata health status") Signed-off-by:
-
Darrick J. Wong authored
Merge tag 'inode-walk-cleanups-5.14_2021-06-03' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-5.14-merge2 xfs: clean up incore inode walk functions This ambitious series aims to cleans up redundant inode walk code in xfs_icache.c, hide implementation details of the quotaoff dquot release code, and eliminates indirect function calls from incore inode walks. The first thing it does is to move all the code that quotaoff calls to release dquots from all incore inodes into xfs_icache.c. Next, it separates the goal of an inode walk from the actual radix tree tags that may or may not be involved and drops the kludgy XFS_ICI_NO_TAG thing. Finally, we split the speculative preallocation (blockgc) and quotaoff dquot release code paths into separate functions so that we can keep the implementations cohesive. Christoph suggested last cycle that we 'simply' change quotaoff not to allow deactivating quota entirely, but as these cleanups are to enable one major change in behavior (deferred inode inactivation) I do not want to add a second behavior change (quotaoff) as a dependency. To be blunt: Additional cleanups are not in scope for this series. Next, I made two observations about incore inode radix tree walks -- since there's a 1:1 mapping between the walk goal and the per-inode processing function passed in, we can use the goal to make a direct call to the processing function. Furthermore, the only caller to supply a nonzero iter_flags argument is quotaoff, and there's only one INEW flag. From that observation, I concluded that it's quite possible to remove two parameters from the xfs_inode_walk* function signatures -- the iter_flags, and the execute function pointer. The middle of the series moves the INEW functionality into the one piece (quotaoff) that wants it, and removes the indirect calls. The final observation is that the inode reclaim walk loop is now almost the same as xfs_inode_walk, so it's silly to maintain two copies. Merge the reclaim loop code into xfs_inode_walk. Lastly, refactor the per-ag radix tagging functions since there's duplicated code that can be consolidated. This series is a prerequisite for the next two patchsets, since deferred inode inactivation will add another inode radix tree tag and iterator function to xfs_inode_walk. v2: walk the vfs inode list when running quotaoff instead of the radix tree, then rework the (now completely internal) inode walk function to take the tag as the main parameter. v3: merge the reclaim loop into xfs_inode_walk, then consolidate the radix tree tagging functions v4: rebase to 5.13-rc4 v5: combine with the quotaoff patchset, reorder functions to minimize forward declarations, split inode walk goals from radix tree tags to reduce conceptual confusion v6: start moving the inode cache code towards the xfs_icwalk prefix * tag 'inode-walk-cleanups-5.14_2021-06-03' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux: xfs: refactor per-AG inode tagging functions xfs: merge xfs_reclaim_inodes_ag into xfs_inode_walk_ag xfs: pass struct xfs_eofblocks to the inode scan callback xfs: fix radix tree tag signs xfs: make the icwalk processing functions clean up the grab state xfs: clean up inode state flag tests in xfs_blockgc_igrab xfs: remove indirect calls from xfs_inode_walk{,_ag} xfs: remove iter_flags parameter from xfs_inode_walk_* xfs: move xfs_inew_wait call into xfs_dqrele_inode xfs: separate the dqrele_all inode grab logic from xfs_inode_walk_ag_grab xfs: pass the goal of the incore inode walk to xfs_inode_walk() xfs: rename xfs_inode_walk functions to xfs_icwalk xfs: move the inode walk functions further down xfs: detach inode dquots at the end of inactivation xfs: move the quotaoff dqrele inode walk into xfs_icache.c [djwong: added variable names to function declarations while fixing merge conflicts] Signed-off-by:
-
Darrick J. Wong authored
Merge tag 'assorted-fixes-5.14-1_2021-06-03' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-5.14-merge2 xfs: assorted fixes for 5.14, part 1 This branch contains the first round of various small fixes for 5.14. * tag 'assorted-fixes-5.14-1_2021-06-03' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux: xfs: don't take a spinlock unconditionally in the DIO fastpath xfs: mark xfs_bmap_set_attrforkoff static xfs: Remove redundant assignment to busy xfs: sort variable alphabetically to avoid repeated declaration
-
Darrick J. Wong authored
Merge tag 'unit-conversion-cleanups-5.14_2021-06-03' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-5.14-merge2 xfs: various unit conversions Crafting the realtime file extent size hint fixes revealed various opportunities to clean up unit conversions, so now that gets its own series. * tag 'unit-conversion-cleanups-5.14_2021-06-03' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux: xfs: remove unnecessary shifts xfs: clean up open-coded fs block unit conversions
-
Dave Chinner authored
From: Dave Chinner <dchinner@redhat.com> Stephen Rothwell reported this compiler warning from linux-next: fs/xfs/libxfs/xfs_ialloc.c: In function 'xfs_difree_finobt': fs/xfs/libxfs/xfs_ialloc.c:2032:20: warning: unused variable 'agi' [-Wunused-variable] 2032 | struct xfs_agi *agi = agbp->b_addr; Which is fallout from agno -> perag conversions that were done in this function. xfs_check_agi_freecount() is the only user of "agi" in xfs_difree_finobt() now, and it only uses the agi to get the current free inode count. We hold that in the perag structure, so there's not need to directly reference the raw AGI to get this information. The btree cursor being passed to xfs_check_agi_freecount() has a reference to the perag being operated on, so use that directly in xfs_check_agi_freecount() rather than passing an AGI. Fixes: 7b13c515 ("xfs: use perag for ialloc btree cursors") Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Darrick J. Wong authored
Merge tag 'xfs-perag-conv-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs into xfs-5.14-merge2 xfs: initial agnumber -> perag conversions for shrink If we want to use active references to the perag to be able to gate shrink removing AGs and hence perags safely, we've got a fair bit of work to do actually use perags in all the places we need to. There's a lot of code that iterates ag numbers and then looks up perags from that, often multiple times for the same perag in the one operation. If we want to use reference counted perags for access control, then we need to convert all these uses to perag iterators, not agno iterators. [Patches 1-4] The first step of this is consolidating all the perag management - init, free, get, put, etc into a common location. THis is spread all over the place right now, so move it all into libxfs/xfs_ag.[ch]. This does expose kernel only bits of the perag to libxfs and hence userspace, so the structures and code is rearranged to minimise the number of ifdefs that need to be added to the userspace codebase. The perag iterator in xfs_icache.c is promoted to a first class API and expanded to the needs of the code as required. [Patches 5-10] These are the first basic perag iterator conversions and changes to pass the perag down the stack from those iterators where appropriate. A lot of this is obvious, simple changes, though in some places we stop passing the perag down the stack because the code enters into an as yet unconverted subsystem that still uses raw AGs. [Patches 11-16] These replace the agno passed in the btree cursor for per-ag btree operations with a perag that is passed to the cursor init function. The cursor takes it's own reference to the perag, and the reference is dropped when the cursor is deleted. Hence we get reference coverage for the entire time the cursor is active, even if the code that initialised the cursor drops it's reference before the cursor or any of it's children (duplicates) have been deleted. The first patch adds the perag infrastructure for the cursor, the next four patches convert a btree cursor at a time, and the last removes the agno from the cursor once it is unused. [Patches 17-21] These patches are a demonstration of the simplifications and cleanups that come from plumbing the perag through interfaces that select and then operate on a specific AG. In this case the inode allocation algorithm does up to three walks across all AGs before it either allocates an inode or fails. Two of these walks are purely just to select the AG, and even then it doesn't guarantee inode allocation success so there's a third walk if the selected AG allocation fails. These patches collapse the selection and allocation into a single loop, simplifies the error handling because xfs_dir_ialloc() always returns ENOSPC if no AG was selected for inode allocation or we fail to allocate an inode in any AG, gets rid of xfs_dir_ialloc() wrapper, converts inode allocation to run entirely from a single perag instance, and then factors xfs_dialloc() into a much, much simpler loop which is easy to understand. Hence we end up with the same inode allocation logic, but it only needs two complete iterations at worst, makes AG selection and allocation atomic w.r.t. shrink and chops out out over 100 lines of code from this hot code path. [Patch 22] Converts the unlink path to pass perags through it. There's more conversion work to be done, but this patchset gets through a large chunk of it in one hit. Most of the iterators are converted, so once this is solidified we can move on to converting these to active references for being able to free perags while the fs is still active. * tag 'xfs-perag-conv-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (23 commits) xfs: remove xfs_perag_t xfs: use perag through unlink processing xfs: clean up and simplify xfs_dialloc() xfs: inode allocation can use a single perag instance xfs: get rid of xfs_dir_ialloc() xfs: collapse AG selection for inode allocation xfs: simplify xfs_dialloc_select_ag() return values xfs: remove agno from btree cursor xfs: use perag for ialloc btree cursors xfs: convert allocbt cursors to use perags xfs: convert refcount btree cursor to use perags xfs: convert rmap btree cursor to using a perag xfs: add a perag to the btree cursor xfs: pass perags around in fsmap data dev functions xfs: push perags through the ag reservation callouts xfs: pass perags through to the busy extent code xfs: convert secondary superblock walk to use perags xfs: convert xfs_iwalk to use perag references xfs: convert raw ag walks to use for_each_perag xfs: make for_each_perag... a first class citizen ...
-
Darrick J. Wong authored
Merge tag 'xfs-buf-bulk-alloc-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs into xfs-5.14-merge2 xfs: buffer cache bulk page allocation This patchset makes use of the new bulk page allocation interface to reduce the overhead of allocating large numbers of pages in a loop. The first two patches are refactoring buffer memory allocation and converting the uncached buffer path to use the same page allocation path, followed by converting the page allocation path to use bulk allocation. The rest of the patches are then consolidation of the page allocation and freeing code to simplify the code and remove a chunk of unnecessary abstraction. This is largely based on a series of changes made by Christoph Hellwig. * tag 'xfs-buf-bulk-alloc-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: xfs: merge xfs_buf_allocate_memory xfs: cleanup error handling in xfs_buf_get_map xfs: get rid of xb_to_gfp() xfs: simplify the b_page_count calculation xfs: remove ->b_offset handling for page backed buffers xfs: move page freeing into _xfs_buf_free_pages() xfs: merge _xfs_buf_get_pages() xfs: use alloc_pages_bulk_array() for buffers xfs: use xfs_buf_alloc_pages for uncached buffers xfs: split up xfs_buf_allocate_memory
-
- 07 Jun, 2021 5 commits
-
-
Dave Chinner authored
It only has one caller and is now a simple function, so merge it into the caller. Signed-off-by:
-
Christoph Hellwig authored
Use a single goto label for freeing the buffer and returning an error. Signed-off-by:
-
Dave Chinner authored
Only used in one place, so just open code the logic in the macro. Based on a patch from Christoph Hellwig. Signed-off-by:
-
Christoph Hellwig authored
Ever since we stopped using the Linux page cache to back XFS buffers there is no need to take the start sector into account for calculating the number of pages in a buffer, as the data always start from the beginning of the buffer. Signed-off-by:
-
Christoph Hellwig authored
->b_offset can only be non-zero for _XBF_KMEM backed buffers, so remove all code dealing with it for page backed buffers. Signed-off-by:
-
- 03 Jun, 2021 3 commits
-
-
Darrick J. Wong authored
In preparation for adding another incore inode tree tag, refactor the code that sets and clears tags from the per-AG inode tree and the tree of per-AG structures, and remove the open-coded versions used by the blockgc code. Note: For reclaim, we now rely on the radix tree tags instead of the reclaimable inode count more heavily than we used to. The conversion should be fine, but the logic isn't 100% identical. Signed-off-by:
-
Darrick J. Wong authored
Merge these two inode walk loops together, since they're pretty similar now. Signed-off-by:
-
Darrick J. Wong authored
Pass a pointer to the actual eofb structure around the inode scanner functions instead of a void pointer, now that none of the functions is used as a callback. Signed-off-by:
-
