Commits · 10c3ba7dbe6e26133625cb6b25ab3e56e09f13df · Kirill Smelkov / linux

27 Aug, 2020 20 commits

brcmfmac: fweh: Remove set but unused variable 'err' · 10c3ba7d

Lee Jones authored Aug 14, 2020

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c: In function ‘brcmf_fweh_handle_if_event’:
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c:131:6: warning: variable ‘err’ set but not used [-Wunused-but-set-variable]

Cc: Arend van Spriel <arend.vanspriel@broadcom.com>
Cc: Franky Lin <franky.lin@broadcom.com>
Cc: Hante Meuleman <hante.meuleman@broadcom.com>
Cc: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Cc: Wright Feng <wright.feng@cypress.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
Cc: linux-wireless@vger.kernel.org
Cc: brcm80211-dev-list.pdl@broadcom.com
Cc: brcm80211-dev-list@cypress.com
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200814113933.1903438-23-lee.jones@linaro.org

10c3ba7d

b43legacy: main: Provide braces around empty 'if' body · 6214ef8a

Lee Jones authored Aug 14, 2020

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/broadcom/b43legacy/main.c: In function ‘b43legacy_interrupt_tasklet’:
 drivers/net/wireless/broadcom/b43legacy/main.c:1344:3: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]

Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Martin Langer <martin-langer@gmx.de>
Cc: Stefano Brivio <stefano.brivio@polimi.it>
Cc: Michael Buesch <m@bues.ch>
Cc: van Dyk <kugelfang@gentoo.org>
Cc: Andreas Jaggi <andreas.jaggi@waterwave.ch>
Cc: linux-wireless@vger.kernel.org
Cc: b43-dev@lists.infradead.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200814113933.1903438-18-lee.jones@linaro.org

6214ef8a

ipw2200: Remove set but unused variables 'rc' and 'w' · b2e73208

Lee Jones authored Aug 14, 2020

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/intel/ipw2x00/ipw2200.c: In function ‘ipw_irq_tasklet’:
 drivers/net/wireless/intel/ipw2x00/ipw2200.c:1953:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]
 drivers/net/wireless/intel/ipw2x00/ipw2200.c: In function ‘ipw_rx’:
 drivers/net/wireless/intel/ipw2x00/ipw2200.c:8251:9: warning: variable ‘w’ set but not used [-Wunused-but-set-variable]

Cc: Stanislav Yakovlev <stas.yakovlev@gmail.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Gerald Combs <gerald@ethereal.com>
Cc: Linux Wireless <ilw@linux.intel.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200814113933.1903438-17-lee.jones@linaro.org

b2e73208

iwlegacy: common: Demote kerneldoc headers to standard comment blocks · 9bafe8b8

Lee Jones authored Aug 14, 2020

Almost all of the headers in this file fail to reach the standards
required by kernel-doc and no "kernel-doc::" references are made to it
from the kernel's Documentation.

Fixes the following W=1 kernel build warning(s):

drivers/net/wireless/intel/iwlegacy/common.c: In function ‘il_enqueue_hcmd’:
drivers/net/wireless/intel/iwlegacy/common.c:3126:6: warning: variable ‘len’ set but not used [-Wunused-but-set-variable]
drivers/net/wireless/intel/iwlegacy/common.c:697: warning: Function parameter or member 'il' not described in 'il_eeprom_init'
drivers/net/wireless/intel/iwlegacy/common.c:848: warning: Function parameter or member 'il' not described in 'il_mod_ht40_chan_info'
drivers/net/wireless/intel/iwlegacy/common.c:848: warning: Function parameter or member 'band' not described in 'il_mod_ht40_chan_info'
drivers/net/wireless/intel/iwlegacy/common.c:848: warning: Function parameter or member 'channel' not described in 'il_mod_ht40_chan_info'
drivers/net/wireless/intel/iwlegacy/common.c:848: warning: Function parameter or member 'eeprom_ch' not described in 'il_mod_ht40_chan_info'
drivers/net/wireless/intel/iwlegacy/common.c:848: warning: Function parameter or member 'clear_ht40_extension_channel' not described in 'il_mod_ht40_chan_info'
drivers/net/wireless/intel/iwlegacy/common.c:885: warning: Function parameter or member 'il' not described in 'il_init_channel_map'
drivers/net/wireless/intel/iwlegacy/common.c:1035: warning: Function parameter or member 'il' not described in 'il_get_channel_info'
drivers/net/wireless/intel/iwlegacy/common.c:1035: warning: Function parameter or member 'band' not described in 'il_get_channel_info'
drivers/net/wireless/intel/iwlegacy/common.c:1035: warning: Function parameter or member 'channel' not described in 'il_get_channel_info'
drivers/net/wireless/intel/iwlegacy/common.c:1351: warning: Function parameter or member 'il' not described in 'il_scan_cancel'
drivers/net/wireless/intel/iwlegacy/common.c:1365: warning: Function parameter or member 'il' not described in 'il_scan_cancel_timeout'
drivers/net/wireless/intel/iwlegacy/common.c:1617: warning: Function parameter or member 'il' not described in 'il_fill_probe_req'
drivers/net/wireless/intel/iwlegacy/common.c:1617: warning: Function parameter or member 'frame' not described in 'il_fill_probe_req'
drivers/net/wireless/intel/iwlegacy/common.c:1617: warning: Function parameter or member 'ta' not described in 'il_fill_probe_req'
drivers/net/wireless/intel/iwlegacy/common.c:1617: warning: Function parameter or member 'ies' not described in 'il_fill_probe_req'
drivers/net/wireless/intel/iwlegacy/common.c:1617: warning: Function parameter or member 'ie_len' not described in 'il_fill_probe_req'
drivers/net/wireless/intel/iwlegacy/common.c:1617: warning: Function parameter or member 'left' not described in 'il_fill_probe_req'
drivers/net/wireless/intel/iwlegacy/common.c:1924: warning: Function parameter or member 'il' not described in 'il_prep_station'
drivers/net/wireless/intel/iwlegacy/common.c:1924: warning: Function parameter or member 'addr' not described in 'il_prep_station'
drivers/net/wireless/intel/iwlegacy/common.c:1924: warning: Function parameter or member 'is_ap' not described in 'il_prep_station'
drivers/net/wireless/intel/iwlegacy/common.c:1924: warning: Function parameter or member 'sta' not described in 'il_prep_station'
drivers/net/wireless/intel/iwlegacy/common.c:2009: warning: Function parameter or member 'il' not described in 'il_add_station_common'
drivers/net/wireless/intel/iwlegacy/common.c:2009: warning: Function parameter or member 'addr' not described in 'il_add_station_common'
drivers/net/wireless/intel/iwlegacy/common.c:2009: warning: Function parameter or member 'is_ap' not described in 'il_add_station_common'
drivers/net/wireless/intel/iwlegacy/common.c:2009: warning: Function parameter or member 'sta' not described in 'il_add_station_common'
drivers/net/wireless/intel/iwlegacy/common.c:2009: warning: Function parameter or member 'sta_id_r' not described in 'il_add_station_common'
drivers/net/wireless/intel/iwlegacy/common.c:2070: warning: Function parameter or member 'il' not described in 'il_sta_ucode_deactivate'
drivers/net/wireless/intel/iwlegacy/common.c:2070: warning: Function parameter or member 'sta_id' not described in 'il_sta_ucode_deactivate'
drivers/net/wireless/intel/iwlegacy/common.c:2144: warning: Function parameter or member 'il' not described in 'il_remove_station'
drivers/net/wireless/intel/iwlegacy/common.c:2144: warning: Function parameter or member 'sta_id' not described in 'il_remove_station'
drivers/net/wireless/intel/iwlegacy/common.c:2144: warning: Function parameter or member 'addr' not described in 'il_remove_station'
drivers/net/wireless/intel/iwlegacy/common.c:2205: warning: Function parameter or member 'il' not described in 'il_clear_ucode_stations'
drivers/net/wireless/intel/iwlegacy/common.c:2237: warning: Function parameter or member 'il' not described in 'il_restore_stations'
drivers/net/wireless/intel/iwlegacy/common.c:2372: warning: Function parameter or member 'il' not described in 'il_is_lq_table_valid'
drivers/net/wireless/intel/iwlegacy/common.c:2372: warning: Function parameter or member 'lq' not described in 'il_is_lq_table_valid'
drivers/net/wireless/intel/iwlegacy/common.c:2401: warning: Function parameter or member 'il' not described in 'il_send_lq_cmd'
drivers/net/wireless/intel/iwlegacy/common.c:2401: warning: Function parameter or member 'lq' not described in 'il_send_lq_cmd'
drivers/net/wireless/intel/iwlegacy/common.c:2401: warning: Function parameter or member 'flags' not described in 'il_send_lq_cmd'
drivers/net/wireless/intel/iwlegacy/common.c:2539: warning: Function parameter or member 'q' not described in 'il_rx_queue_space'
drivers/net/wireless/intel/iwlegacy/common.c:2556: warning: Function parameter or member 'il' not described in 'il_rx_queue_update_write_ptr'
drivers/net/wireless/intel/iwlegacy/common.c:2556: warning: Function parameter or member 'q' not described in 'il_rx_queue_update_write_ptr'
drivers/net/wireless/intel/iwlegacy/common.c:2711: warning: Function parameter or member 'il' not described in 'il_txq_update_write_ptr'
drivers/net/wireless/intel/iwlegacy/common.c:2711: warning: Function parameter or member 'txq' not described in 'il_txq_update_write_ptr'
drivers/net/wireless/intel/iwlegacy/common.c:2751: warning: Function parameter or member 'il' not described in 'il_tx_queue_unmap'
drivers/net/wireless/intel/iwlegacy/common.c:2751: warning: Function parameter or member 'txq_id' not described in 'il_tx_queue_unmap'
drivers/net/wireless/intel/iwlegacy/common.c:2775: warning: Function parameter or member 'il' not described in 'il_tx_queue_free'
drivers/net/wireless/intel/iwlegacy/common.c:2775: warning: Function parameter or member 'txq_id' not described in 'il_tx_queue_free'
drivers/net/wireless/intel/iwlegacy/common.c:2775: warning: Excess function parameter 'txq' description in 'il_tx_queue_free'
drivers/net/wireless/intel/iwlegacy/common.c:2813: warning: Function parameter or member 'il' not described in 'il_cmd_queue_unmap'
drivers/net/wireless/intel/iwlegacy/common.c:2856: warning: Function parameter or member 'il' not described in 'il_cmd_queue_free'
drivers/net/wireless/intel/iwlegacy/common.c:2856: warning: Excess function parameter 'txq' description in 'il_cmd_queue_free'
drivers/net/wireless/intel/iwlegacy/common.c:2932: warning: Function parameter or member 'il' not described in 'il_queue_init'
drivers/net/wireless/intel/iwlegacy/common.c:2932: warning: Function parameter or member 'q' not described in 'il_queue_init'
drivers/net/wireless/intel/iwlegacy/common.c:2932: warning: Function parameter or member 'slots' not described in 'il_queue_init'
drivers/net/wireless/intel/iwlegacy/common.c:2932: warning: Function parameter or member 'id' not described in 'il_queue_init'
drivers/net/wireless/intel/iwlegacy/common.c:2966: warning: Function parameter or member 'il' not described in 'il_tx_queue_alloc'
drivers/net/wireless/intel/iwlegacy/common.c:2966: warning: Function parameter or member 'txq' not described in 'il_tx_queue_alloc'
drivers/net/wireless/intel/iwlegacy/common.c:2966: warning: Function parameter or member 'id' not described in 'il_tx_queue_alloc'
drivers/net/wireless/intel/iwlegacy/common.c:3006: warning: Function parameter or member 'il' not described in 'il_tx_queue_init'
drivers/net/wireless/intel/iwlegacy/common.c:3006: warning: Function parameter or member 'txq_id' not described in 'il_tx_queue_init'
drivers/net/wireless/intel/iwlegacy/common.c:3245: warning: Function parameter or member 'il' not described in 'il_hcmd_queue_reclaim'
drivers/net/wireless/intel/iwlegacy/common.c:3245: warning: Function parameter or member 'txq_id' not described in 'il_hcmd_queue_reclaim'
drivers/net/wireless/intel/iwlegacy/common.c:3245: warning: Function parameter or member 'idx' not described in 'il_hcmd_queue_reclaim'
drivers/net/wireless/intel/iwlegacy/common.c:3245: warning: Function parameter or member 'cmd_idx' not described in 'il_hcmd_queue_reclaim'
drivers/net/wireless/intel/iwlegacy/common.c:3279: warning: Function parameter or member 'il' not described in 'il_tx_cmd_complete'
drivers/net/wireless/intel/iwlegacy/common.c:3425: warning: Function parameter or member 'il' not described in 'il_init_geos'
drivers/net/wireless/intel/iwlegacy/common.c:3949: warning: bad line:
drivers/net/wireless/intel/iwlegacy/common.c:3955: warning: Function parameter or member 'il' not described in 'il_set_rxon_channel'
drivers/net/wireless/intel/iwlegacy/common.c:4154: warning: Function parameter or member 'il' not described in 'il_irq_handle_error'
drivers/net/wireless/intel/iwlegacy/common.c:5019: warning: Function parameter or member 'hw' not described in 'il_mac_config'
drivers/net/wireless/intel/iwlegacy/common.c:5019: warning: Function parameter or member 'changed' not described in 'il_mac_config'

Cc: Stanislaw Gruszka <stf_xl@wp.pl>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Linux Wireless <ilw@linux.intel.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200814113933.1903438-16-lee.jones@linaro.org

9bafe8b8

iwlegacy: common: Remove set but not used variable 'len' · 0171c618

Lee Jones authored Aug 14, 2020

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/intel/iwlegacy/common.c: In function ‘il_enqueue_hcmd’:
 drivers/net/wireless/intel/iwlegacy/common.c:3126:6: warning: variable ‘len’ set but not used [-Wunused-but-set-variable]

Cc: Stanislaw Gruszka <stf_xl@wp.pl>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Linux Wireless <ilw@linux.intel.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200814113933.1903438-15-lee.jones@linaro.org

0171c618

airo: Fix a myriad of coding style issues · ba4d6513

Lee Jones authored Aug 14, 2020

- Ensure spaces appear after {for, if, while, etc}
 - Ensure spaces to not appear after '('
 - Ensure spaces to not appear before ')'
 - Ensure spaces appear between ')' and '{'
 - Ensure spaces appear after ','
 - Ensure spaces do not appear before ','
 - Ensure spaces appear either side of '='
 - Ensure '{'s which open functions are on a new line
 - Remove trailing whitespace

There are still a whole host of issues with this file, but this
patch certainly breaks the back of them.

Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Benjamin Reed <breed@users.sourceforge.net>
Cc: Javier Achirica <achirica@users.sourceforge.net>
Cc: Jean Tourrilhes <jt@hpl.hp.com>
Cc: Fabrice Bellet <fabrice@bellet.info>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200814113933.1903438-13-lee.jones@linaro.org

ba4d6513

airo: Place brackets around empty statement · 0b6a4247

Lee Jones authored Aug 14, 2020

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/cisco/airo.c: In function ‘airo_init_module’:
 drivers/net/wireless/cisco/airo.c:5663:21: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]

Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Benjamin Reed <breed@users.sourceforge.net>
Cc: Javier Achirica <achirica@users.sourceforge.net>
Cc: Jean Tourrilhes <jt@hpl.hp.com>
Cc: Fabrice Bellet <fabrice@bellet.info>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200814113933.1903438-12-lee.jones@linaro.org

0b6a4247

b43: main: Add braces around empty statements · 64847777

Lee Jones authored Aug 14, 2020

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/broadcom/b43/main.c: In function ‘b43_dummy_transmission’:
 drivers/net/wireless/broadcom/b43/main.c:785:3: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
 drivers/net/wireless/broadcom/b43/main.c: In function ‘b43_do_interrupt_thread’:
 drivers/net/wireless/broadcom/b43/main.c:2017:3: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]

Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Martin Langer <martin-langer@gmx.de>
Cc: Stefano Brivio <stefano.brivio@polimi.it>
Cc: Michael Buesch <m@bues.ch>
Cc: van Dyk <kugelfang@gentoo.org>
Cc: Andreas Jaggi <andreas.jaggi@waterwave.ch>
Cc: Albert Herranz <albert_herranz@yahoo.es>
Cc: linux-wireless@vger.kernel.org
Cc: b43-dev@lists.infradead.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200814113933.1903438-8-lee.jones@linaro.org

64847777

atmel: Demote non-kerneldoc header to standard comment block · 68fd3030

Lee Jones authored Aug 14, 2020

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/atmel/atmel.c:4232: warning: Cannot understand     This file is part of net.russotto.AtmelMACFW, hereto referred to

Cc: Simon Kelley <simon@thekelleys.org.uk>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200814113933.1903438-6-lee.jones@linaro.org

68fd3030

rtw88: 8822c: update tx power limit tables to RF v20.1 · 96f9806f

Zong-Zhe Yang authored Aug 24, 2020

update tx power limits of channels 12, 13 for FCC
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200824084453.29953-1-yhchuang@realtek.com

96f9806f

rtw88: use read_poll_timeout_atomic() for poll loop · 86fbf264

Brian Norris authored Aug 21, 2020

This gives the added bonus of not wasting an extra udelay() if we're
timing out -- we double-check the register state one last time before
returning.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200821235733.1785009-1-briannorris@chromium.org

86fbf264

rtw88: don't treat NULL pointer as an array · 22b726cb

Brian Norris authored Aug 21, 2020

I'm not a standards expert, but this really looks to be undefined
behavior, when chip->dig_cck may be NULL. (And, we're trying to do a
NULL check a few lines down, because some chip variants will use NULL.)

Fixes: fc637a86 ("rtw88: 8723d: Set IG register for CCK rate")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Acked-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200821211716.1631556-1-briannorris@chromium.org

22b726cb

rtw88: Use fallthrough pseudo-keyword · 5466aff8

Gustavo A. R. Silva authored Aug 21, 2020

Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1].

[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-throughSigned-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200821064959.GA23693@embeddedor

5466aff8

wilc1000: Fix memleak in wilc_bus_probe · 9a19a939

Dinghao Liu authored Aug 20, 2020

When devm_clk_get() returns -EPROBE_DEFER, spi_priv
should be freed just like when wilc_cfg80211_init()
fails.

Fixes: 854d66df ("staging: wilc1000: look for rtc_clk clock in spi mode")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Acked-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200820055256.24333-1-dinghao.liu@zju.edu.cn

9a19a939

rtw88: switch from 'pci_' to 'dma_' API · 24712ea9

Christophe JAILLET authored Aug 20, 2020

The wrappers in include/linux/pci-dma-compat.h should go away.

The patch has been generated with the coccinelle script below and has been
hand modified to replace GFP_ with a correct flag.
It has been compile tested.

When memory is allocated in 'rtw_pci_init_tx_ring()' and
'rtw_pci_init_rx_ring()' GFP_KERNEL can be used because both functions are
called from a probe function and no spinlock is taken.

The call chain is:
  rtw_pci_probe
    --> rtw_pci_setup_resource
      --> rtw_pci_init
        --> rtw_pci_init_trx_ring
          --> rtw_pci_init_tx_ring
          --> rtw_pci_init_rx_ring

@@
@@
-    PCI_DMA_BIDIRECTIONAL
+    DMA_BIDIRECTIONAL

@@
@@
-    PCI_DMA_TODEVICE
+    DMA_TO_DEVICE

@@
@@
-    PCI_DMA_FROMDEVICE
+    DMA_FROM_DEVICE

@@
@@
-    PCI_DMA_NONE
+    DMA_NONE

@@
expression e1, e2, e3;
@@
-    pci_alloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3;
@@
-    pci_zalloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3, e4;
@@
-    pci_free_consistent(e1, e2, e3, e4)
+    dma_free_coherent(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_single(e1, e2, e3, e4)
+    dma_map_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_single(e1, e2, e3, e4)
+    dma_unmap_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4, e5;
@@
-    pci_map_page(e1, e2, e3, e4, e5)
+    dma_map_page(&e1->dev, e2, e3, e4, e5)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_page(e1, e2, e3, e4)
+    dma_unmap_page(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_sg(e1, e2, e3, e4)
+    dma_map_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_sg(e1, e2, e3, e4)
+    dma_unmap_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
+    dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_device(e1, e2, e3, e4)
+    dma_sync_single_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
+    dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_device(e1, e2, e3, e4)
+    dma_sync_sg_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2;
@@
-    pci_dma_mapping_error(e1, e2)
+    dma_mapping_error(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_dma_mask(e1, e2)
+    dma_set_mask(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_consistent_dma_mask(e1, e2)
+    dma_set_coherent_mask(&e1->dev, e2)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200820150643.148219-1-christophe.jaillet@wanadoo.fr

24712ea9

wilc1000: Fix memleak in wilc_sdio_probe · 8d95ab34

Dinghao Liu authored Aug 20, 2020

When devm_clk_get() returns -EPROBE_DEFER, sdio_priv
should be freed just like when wilc_cfg80211_init()
fails.

Fixes: 8692b047 ("staging: wilc1000: look for rtc_clk clock")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Acked-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200820054819.23365-1-dinghao.liu@zju.edu.cn

8d95ab34

mwifiex: don't call del_timer_sync() on uninitialized timer · 621a3a8b

Tetsuo Handa authored Aug 21, 2020

syzbot is reporting that del_timer_sync() is called from
mwifiex_usb_cleanup_tx_aggr() from mwifiex_unregister_dev() without
checking timer_setup() from mwifiex_usb_tx_init() was called [1].

Ganapathi Bhat proposed a possibly cleaner fix, but it seems that
that fix was forgotten [2].

"grep -FrB1 'del_timer' drivers/ | grep -FA1 '.function)'" says that
currently there are 28 locations which call del_timer[_sync]() only if
that timer's function field was initialized (because timer_setup() sets
that timer's function field). Therefore, let's use same approach here.

[1] https://syzkaller.appspot.com/bug?id=26525f643f454dd7be0078423e3cdb0d57744959
[2] https://lkml.kernel.org/r/CA+ASDXMHt2gq9Hy+iP_BYkWXsSreWdp3_bAfMkNcuqJ3K+-jbQ@mail.gmail.comReported-by: syzbot <syzbot+dc4127f950da51639216@syzkaller.appspotmail.com>
Cc: Ganapathi Bhat <ganapathi.bhat@nxp.com>
Cc: Brian Norris <briannorris@chromium.org>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Acked-by: Ganapathi Bhat <ganapathi.bhat@nxp.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200821082720.7716-1-penguin-kernel@I-love.SAKURA.ne.jp

621a3a8b

mwifiex: Use fallthrough pseudo-keyword · 32f44730

Gustavo A. R. Silva authored Aug 21, 2020

Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1].

[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-throughSigned-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200821064720.GA22182@embeddedor

32f44730

mwifiex: Clean up some err and dbg messages · 5f8a3ed3

Christophe JAILLET authored Aug 19, 2020

The error message if 'pci_set_consistent_dma_mask()' fails is misleading.
The function call uses 32 bits, but the error message reports 64.

Moreover, according to the comment above 'dma_set_mask_and_coherent()'
definition, such an error can never happen.

So, simplify code, axe the misleading message and use
'dma_set_mask_and_coherent()' instead of 'dma_set_mask()' +
'dma_set_coherent_mask()'

While at it, make some clean-up:
   - add # when reporting allocated length to be consistent between
     functions
   - s/consistent/coherent/
   - s/unsigned int/u32/ to be consistent between functions
   - align some code
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200819071853.113185-1-christophe.jaillet@wanadoo.fr

5f8a3ed3

mwifiex: switch from 'pci_' to 'dma_' API · 4cf975f6

Christophe JAILLET authored Aug 19, 2020

The wrappers in include/linux/pci-dma-compat.h should go away.

The patch has been generated with the coccinelle script below and has been
hand modified to replace GFP_ with a correct flag.
It has been compile tested.

When memory is allocated in 'mwifiex_pcie_alloc_buffers()' (see details in
the call chain below) GFP_KERNEL can be used because both
'mwifiex_register()' and 'mwifiex_reinit_sw()' already use GFP_KERNEL.
(for 'mwifiex_reinit_sw()', it is hidden in a call to 'alloc_workqueue()')

The call chain is:
  mwifiex_register
    --> mwifiex_init_pcie        (.init_if function, see mwifiex_if_ops)
   [ or ]
  mwifiex_reinit_sw
    -->mwifiex_pcie_up_dev       (.up_dev function, see mwifiex_if_ops)

    [ then in both case ]
      -->mwifiex_pcie_alloc_buffers
        --> mwifiex_pcie_create_txbd_ring
        --> mwifiex_pcie_create_rxbd_ring
        --> mwifiex_pcie_create_evtbd_ring
        --> mwifiex_pcie_alloc_sleep_cookie_buf

@@
@@
-    PCI_DMA_BIDIRECTIONAL
+    DMA_BIDIRECTIONAL

@@
@@
-    PCI_DMA_TODEVICE
+    DMA_TO_DEVICE

@@
@@
-    PCI_DMA_FROMDEVICE
+    DMA_FROM_DEVICE

@@
@@
-    PCI_DMA_NONE
+    DMA_NONE

@@
expression e1, e2, e3;
@@
-    pci_alloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3;
@@
-    pci_zalloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3, e4;
@@
-    pci_free_consistent(e1, e2, e3, e4)
+    dma_free_coherent(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_single(e1, e2, e3, e4)
+    dma_map_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_single(e1, e2, e3, e4)
+    dma_unmap_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4, e5;
@@
-    pci_map_page(e1, e2, e3, e4, e5)
+    dma_map_page(&e1->dev, e2, e3, e4, e5)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_page(e1, e2, e3, e4)
+    dma_unmap_page(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_sg(e1, e2, e3, e4)
+    dma_map_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_sg(e1, e2, e3, e4)
+    dma_unmap_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
+    dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_device(e1, e2, e3, e4)
+    dma_sync_single_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
+    dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_device(e1, e2, e3, e4)
+    dma_sync_sg_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2;
@@
-    pci_dma_mapping_error(e1, e2)
+    dma_mapping_error(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_dma_mask(e1, e2)
+    dma_set_mask(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_consistent_dma_mask(e1, e2)
+    dma_set_coherent_mask(&e1->dev, e2)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200819070152.111522-1-christophe.jaillet@wanadoo.fr

4cf975f6

18 Aug, 2020 20 commits

Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git · eb77802e

Kalle Valo authored Aug 18, 2020

ath.git patches for v5.10. Major changes:

ath11k

* add support for QCA6390 PCI devices

wcn36xx

* add support for TX ack

ath9k

* add support for NL80211_EXT_FEATURE_CAN_REPLACE_PTK0 to improve PTK0
  rekeying

eb77802e

rndis_wlan: tighten check of rndis_query_oid return · 094dd0d7

Tom Rix authored Aug 11, 2020

clang static analysis reports this problem

rndis_wlan.c:3147:25: warning: Assigned value is garbage or undefined
                wiphy->max_num_pmkids = le32_to_cpu(caps.num_pmkids);
                                      ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~

The setting of caps happens here, with a call to rndis_query_oid()

	retval = rndis_query_oid(usbdev,
	if (retval >= 0) {

Reviewing rndis_query_oid() shows that on success 0 is returned,
failure is otherwise.  So the retval check is not tight enough.
So tighten the retval check.  Similar problem in
rndis_wlan_get_caps().
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200811140219.8412-1-trix@redhat.com

094dd0d7

mwifiex: Do not use GFP_KERNEL in atomic context · d2ab7f00

Christophe JAILLET authored Aug 09, 2020

A possible call chain is as follow:
  mwifiex_sdio_interrupt                            (sdio.c)
    --> mwifiex_main_process                        (main.c)
      --> mwifiex_process_cmdresp                   (cmdevt.c)
        --> mwifiex_process_sta_cmdresp             (sta_cmdresp.c)
          --> mwifiex_ret_802_11_scan               (scan.c)
            --> mwifiex_parse_single_response_buf   (scan.c)

'mwifiex_sdio_interrupt()' is an interrupt function.

Also note that 'mwifiex_ret_802_11_scan()' already uses GFP_ATOMIC.

So use GFP_ATOMIC instead of GFP_KERNEL when memory is allocated in
'mwifiex_parse_single_response_buf()'.

Fixes: 7c6fa2a8 ("mwifiex: use cfg80211 dynamic scan table and cfg80211_get_bss API")
or
Fixes: 601216e1 ("mwifiex: process RX packets in SDIO IRQ thread directly")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200809092906.744621-1-christophe.jaillet@wanadoo.fr

d2ab7f00

adm8211: switch from 'pci_' to 'dma_' API · 2c762ee5

Christophe JAILLET authored Aug 06, 2020

The wrappers in include/linux/pci-dma-compat.h should go away.

The patch has been generated with the coccinelle script below and has been
hand modified to replace GFP_ with a correct flag.
It has been compile tested.

When memory is allocated in 'adm8211_alloc_rings()', GFP_KERNEL can be used
because it is called only from the probe function and no lock is acquired.
Moreover, GFP_KERNEL is already used just a few lines above in a kmalloc.

@@
@@
-    PCI_DMA_BIDIRECTIONAL
+    DMA_BIDIRECTIONAL

@@
@@
-    PCI_DMA_TODEVICE
+    DMA_TO_DEVICE

@@
@@
-    PCI_DMA_FROMDEVICE
+    DMA_FROM_DEVICE

@@
@@
-    PCI_DMA_NONE
+    DMA_NONE

@@
expression e1, e2, e3;
@@
-    pci_alloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3;
@@
-    pci_zalloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3, e4;
@@
-    pci_free_consistent(e1, e2, e3, e4)
+    dma_free_coherent(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_single(e1, e2, e3, e4)
+    dma_map_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_single(e1, e2, e3, e4)
+    dma_unmap_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4, e5;
@@
-    pci_map_page(e1, e2, e3, e4, e5)
+    dma_map_page(&e1->dev, e2, e3, e4, e5)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_page(e1, e2, e3, e4)
+    dma_unmap_page(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_sg(e1, e2, e3, e4)
+    dma_map_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_sg(e1, e2, e3, e4)
+    dma_unmap_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
+    dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_device(e1, e2, e3, e4)
+    dma_sync_single_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
+    dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_device(e1, e2, e3, e4)
+    dma_sync_sg_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2;
@@
-    pci_dma_mapping_error(e1, e2)
+    dma_mapping_error(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_dma_mask(e1, e2)
+    dma_set_mask(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_consistent_dma_mask(e1, e2)
+    dma_set_coherent_mask(&e1->dev, e2)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200806210431.736050-1-christophe.jaillet@wanadoo.fr

2c762ee5

rtw88: fix spelling mistake: "unsupport" -> "unsupported" · 86c96422

Colin Ian King authored Aug 06, 2020

There are some spelling mistakes in rtw_info messages. Fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200806120803.60113-1-colin.king@canonical.com

86c96422

wl1251, wlcore: fix spelling mistake "buld" -> "build" · db8655c6

Colin Ian King authored Aug 06, 2020

There are spelling mistakes in warning messages. Fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200806113326.53779-1-colin.king@canonical.com

db8655c6

brcmfmac: check ndev pointer · 9c9f015b

Tom Rix authored Aug 02, 2020

Clang static analysis reports this error

brcmfmac/core.c:490:4: warning: Dereference of null pointer
        (*ifp)->ndev->stats.rx_errors++;
        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

In this block of code

	if (ret || !(*ifp) || !(*ifp)->ndev) {
		if (ret != -ENODATA && *ifp)
			(*ifp)->ndev->stats.rx_errors++;
		brcmu_pkt_buf_free_skb(skb);
		return -ENODATA;
	}

(*ifp)->ndev being NULL is caught as an error
But then it is used to report the error.

So add a check before using it.

Fixes: 91b63280 ("brcmfmac: Use net_device_stats from struct net_device")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200802161804.6126-1-trix@redhat.com

9c9f015b

brcmfmac: use %*ph to print small buffer · 838933ca

Andy Shevchenko authored Jul 30, 2020

Use %*ph format to print small buffer as hex string.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200730155327.40130-1-andriy.shevchenko@linux.intel.com

838933ca

brcm80211: fix possible memleak in brcmf_proto_msgbuf_attach · 6c151410

Wang Yufen authored Jul 20, 2020

When brcmf_proto_msgbuf_attach fail and msgbuf->txflow_wq != NULL,
we should destroy the workqueue.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1595237765-66238-1-git-send-email-wangyufen@huawei.com

6c151410

ath11k: Use fallthrough pseudo-keyword · 0b294aeb

Gustavo A. R. Silva authored Jul 27, 2020

Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.

[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-throughSigned-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200727194415.GA1275@embeddedor

0b294aeb

ath11k: Fix possible memleak in ath11k_qmi_init_service · 28f16321

Wang Yufen authored Jul 20, 2020

When qmi_add_lookup fail, we should destroy the workqueue

Fixes: d5c65159 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1595237804-66297-1-git-send-email-wangyufen@huawei.com

28f16321

ath10k: fix VHT NSS calculation when STBC is enabled · 99f41b8e

Sathishkumar Muruganandam authored Aug 14, 2020

When STBC is enabled, NSTS_SU value need to be accounted for VHT NSS
calculation for SU case.

Without this fix, 1SS + STBC enabled case was reported wrongly as 2SS
in radiotap header on monitor mode capture.

Tested-on: QCA9984 10.4-3.10-00047
Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1597392971-3897-1-git-send-email-murugana@codeaurora.org

99f41b8e

ath10k: Register shutdown handler · caf27546

Rakesh Pillai authored Jun 26, 2020

As a part of device shutdown the smmu driver will be
stopped and henceforth any IOVA address translation
will not be done. The wlan driver, being one of the
smmu driver consumer, should stop all the dma related
activity as a part of shutdown, and thereby ensuring
that no dma activity is done once the smmu driver
shuts down.

During the device shutdown, the smmu calls shutdown
for all its consumers in order to indicate them to
stop all their dma activities.

Register the shutdown handler to stop the wlan
driver and avoid any dma operations.

Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1593193981-30161-1-git-send-email-pillair@codeaurora.org

caf27546

ath11k: reset MHI during power down and power up · f3c603d4

Carl Huang authored Aug 17, 2020

For QCA6390, normal power up and power down can't bring MHI
to a workable state. This happens especially in warm reboot
and rmmod and insmod. Host needs to write a few registers to
bring MHI to normal state.

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2
Signed-off-by: Carl Huang <cjhuang@codeauroro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1597555891-26112-10-git-send-email-kvalo@codeaurora.org

f3c603d4

ath11k: use TCL_DATA_RING_0 for QCA6390 · 065f5f68

Carl Huang authored Aug 17, 2020

For QCA6390, wbm2sw1 is used for other purpose rather than
tx completion ring. So use TCL_DATA_RING 0 only for QCA6390.

Add MISC_CAPS_TCL_0_ONLY to control it.

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1597555891-26112-9-git-send-email-kvalo@codeaurora.org

065f5f68

ath11k: process both lmac rings for QCA6390 · 454a9721

Carl Huang authored Aug 17, 2020

For QCA6390, the num_radios is 1 but it needs to process 2 lmac rings.
So use NUM_RXDMA_PER_PDEV to do another loop.

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1597555891-26112-8-git-send-email-kvalo@codeaurora.org

454a9721

ath11k: assign correct search flag and type for QCA6390 · a6275302

Carl Huang authored Aug 17, 2020

QCA6390 doesn't enable V2 map and ummap event, so the addr search
flags and type is different from IPQ8074. Assign correct search flags
and type for QCA6390.

Without this change, ping sometimes fails. With this change, now ping
is always successful.

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1597555891-26112-7-git-send-email-kvalo@codeaurora.org

a6275302

ath11k: delay vdev_start for QCA6390 · e7495035

Carl Huang authored Aug 17, 2020

For QCA6390 firmware, bss peer must be created before vdev_start, so delay
vdev_start until bss peer is created.

e7495035

ath11k: refine the phy_id check in ath11k_reg_chan_list_event · 84eee3c8

Carl Huang authored Aug 17, 2020

For QCA6390, it processes the reg chan list event only for phy0,
and it goes to fallback if the phy_id is not valid. For a valid
phy_id but not 0, just discard the event.

84eee3c8

ath11k: setup QCA6390 rings for both rxdmas · 4152e420

Carl Huang authored Aug 17, 2020

For QCA6390, only one pdev is created and this pdev manages both lmacs, thus
both rxdmas. So host needs to initialize all rxdma related rings for one pdev.

Another difference is for QCA6390, host fills rxbuf to firmware and firmware
further fills the rxbuf to rxbuf ring for each rxdma.

4152e420