- 22 Oct, 2017 38 commits
-
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by:
Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Stefano Brivio authored
No need to re-invent memchr_inv() with !is_all_zero(). While at it, replace conditional and return clauses with a single return clause in is_tnl_info_zero(). Signed-off-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
-
David S. Miller authored
Egil Hjelmeland says: ==================== net: dsa: lan9303: Add fdb/mdb methods This series add support for accessing and managing the lan9303 ALR (Address Logic Resolution). The first patch add low level functions for accessing the ALR, along with port_fast_age and port_fdb_dump methods. The second patch add functions for managing ALR entires, along with remaining fdb/mdb methods. Note that to complete STP support, a special ALR entry with the STP eth address must be added too. This must be addressed later. Comments welcome! Changes v2 -> v3: - Whitespace polishing. Removed some "section" comments. - Prefixed ALR constants with LAN9303_ for consistency. - Patch 2: lan9303_port_fast_age() wrap the "port" into a struct for passing as context to alr_loop_cb_del_port_learned. Safer in event of type change. - Patch 2: Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Changes v1 -> v2: - Patch 2: Removed question comment ==================== Signed-off-by: -
Egil Hjelmeland authored
Add functions for managing the lan9303 ALR (Address Logic Resolution). Implement DSA methods: port_fdb_add, port_fdb_del, port_mdb_prepare, port_mdb_add and port_mdb_del. Since the lan9303 do not offer reading specific ALR entry, the driver caches all static entries - in a flat table. Signed-off-by:
Egil Hjelmeland <privat@egil-hjelmeland.no> Reviewed-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
-
Egil Hjelmeland authored
Add DSA method port_fast_age as a step to STP support. Add low level functions for accessing the lan9303 ALR (Address Logic Resolution). Added DSA method port_fdb_dump Signed-off-by:
-
Jon Maloy authored
The function tipc_sk_timeout() is more complex than necessary, and even seems to contain an undetected bug. At one of the occurences where we renew the timer we just order it with (HZ / 20), instead of (jiffies + HZ / 20); In this commit we clean up the function. Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
David S. Miller authored
Elena Reshetova says: ==================== networking drivers refcount_t conversions Note: these are the last patches related to networking that perform conversion of refcounters from atomic_t to refcount_t. In contrast to the core network refcounter conversions that were merged earlier, these are much more straightforward ones. This series, for various networking drivers, replaces atomic_t reference counters with the new refcount_t type and API (see include/linux/refcount.h). By doing this we prevent intentional or accidental underflows or overflows that can led to use-after-free vulnerabilities. The patches are fully independent and can be cherry-picked separately. Patches are based on top of net-next. If there are no objections to the patches, please merge them via respective trees ==================== Signed-off-by: -
Elena Reshetova authored
atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable cn_callback_entry.refcnt is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
David Windsor <dwindsor@gmail.com> Reviewed-by:
Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by:
Elena Reshetova <elena.reshetova@intel.com> Signed-off-by:
-
Elena Reshetova authored
atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable syncppp.refcnt is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by:
-
Elena Reshetova authored
atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable ppp_file.refcnt is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by:
-
Elena Reshetova authored
atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable asyncppp.refcnt is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by:
-
Elena Reshetova authored
atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable masces_tx_sa.refcnt is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by:
-
Elena Reshetova authored
atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable masces_rx_sc.refcnt is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by:
-
Elena Reshetova authored
atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable masces_rx_sa.refcnt is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by:
-
Elena Reshetova authored
atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable sixpack.refcnt is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by:
-
Elena Reshetova authored
atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable fs_node.refcount is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by:
-
Elena Reshetova authored
atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable mlx5_cq.refcount is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by:
-
Elena Reshetova authored
atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable mlx4_srq.refcount is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by:
-
Elena Reshetova authored
atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable mlx4_qp.refcount is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by:
-
Elena Reshetova authored
atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable mlx4_cq.refcount is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by:
-
Elena Reshetova authored
atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable mtk_eth.dma_refcnt is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by:
-
Elena Reshetova authored
atomic_t variables are currently used to implement reference counters with the following properties: - counter is initialized to 1 using atomic_set() - a resource is freed upon counter reaching zero - once counter reaches zero, its further increments aren't allowed - counter schema uses basic atomic operations (set, inc, inc_not_zero, dec_and_test, etc.) Such atomic variables should be converted to a newly provided refcount_t type and API that prevents accidental counter overflows and underflows. This is important since overflows and underflows can lead to use-after-free situation and be exploitable. The variable clip_entry.refcnt is used as pure reference counter. Convert it to refcount_t and fix up the operations. Suggested-by:
-
David S. Miller authored
Yunsheng Lin says: ==================== Add mac loopback selftest support in hns3 driver This patchset refactors the skb receiving and transmitting function before adding mac loopback selftest support in hns3 driver. ==================== Signed-off-by: -
Yunsheng Lin authored
This patch adds mac loopback selftest support for ethtool cmd by checking if a transmitted packet can be received correctly when mac loopback is enabled. Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
-
Yunsheng Lin authored
This patch refactors the skb receiving and transmitting functions and export them in order to support the ethtool's mac loopback selftest. Signed-off-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== tools: bpftool: add a "version" command, and fix several items Quentin says: The first seven patches of this series bring several minor fixes to bpftool. Please see individual commit logs for details. Last patch adds a "version" commands to bpftool, which is in fact the version of the kernel from which it was compiled. ==================== Signed-off-by: -
Quentin Monnet authored
This command can be used to print the version of the tool, which is in fact the version from Linux taken from usr/include/linux/version.h. Example usage: $ bpftool version bpftool v4.14.0 Signed-off-by:Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Quentin Monnet authored
For the `bpftool prog dump { jited | xlated } ...` command, adding `opcodes` keyword (to request opcodes to be printed) will have no effect if `file FILE` (to write binary output to FILE) is provided. The manual page and the help message to be displayed in the terminal should reflect that, and indicate that these options should be mutually exclusive. Signed-off-by: -
Quentin Monnet authored
The eBPF instruction permitting to load double words (8 bytes) into a register need 8-byte long "immediate" field, and thus occupy twice the space of other instructions. bpftool was aware of this and would increment the instruction counter only once on meeting such instruction, but it would only print the first four bytes of the immediate value to load. Make it able to dump the whole 16 byte-long double instruction instead (as would `llvm-objdump -d <program>`). Signed-off-by:
-
Quentin Monnet authored
Make error messages more consistent. Specifically, when bpftool fails at parsing map key bytes, make it print a single error message to stderr and return from the function, instead of (always) printing a second error message afterwards. Signed-off-by:
-
Quentin Monnet authored
Make error messages and return codes more consistent. Specifically, make `bpftool prog help` a real command, instead of printing usage by default for a non-recognized "help" command. Output is the same, but this makes bpftool return with a success value instead of an error. Signed-off-by:
-
Quentin Monnet authored
Make error messages and return codes more consistent. Specifically, replace the use of info() macro with err() when too many eBPF instructions are received to be dumped, given that bpftool returns with a non-null exit value in that case. Signed-off-by:
-
Quentin Monnet authored
Change the program to have a more consistent return code. Specifically, do not make bpftool return an error code simply because it reaches the end of the list of the eBPF programs to show. Signed-off-by:
-
Quentin Monnet authored
Make print_hex() able to print to any file instead of standard output only, and rename it to fprint_hex(). The function can now be called with the info() macro, for example, without splitting the output between standard and error outputs. Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that in this particular case I placed a "fall through" comment on its own line, which is what GCC is expecting to find. Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by:
-
- 21 Oct, 2017 2 commits
-
-
Steve Lin authored
Moving generic devlink code (registration) out of VF-R code into new bnxt_devlink file, in preparation for future work to add additional devlink functionality to bnxt. Signed-off-by:
Steve Lin <steven.lin1@broadcom.com> Acked-by:
Andy Gospodarek <gospo@broadcom.com> Signed-off-by:
-
Jon Maloy authored
In commit ae236fb2 ("tipc: receive group membership events via member socket") we broke the tipc_poll() function by checking the state of the receive queue before the call to poll_sock_wait(), while relying that state afterwards, when it might have changed. We restore this in this commit. Signed-off-by:
-
