- 09 Aug, 2016 40 commits
-
-
Stefan Bader authored
Signed-off-by:Stefan Bader <stefan.bader@canonical.com>
-
Timo Aaltonen authored
BugLink: http://bugs.launchpad.net/bugs/1609742 Sync with v4.7 and un-revert 280201ac which got fixed upstream. Also drop two workarounds from 9f81d279: drm/i915/edp: Add WaKVMNotificationOnConfigChange:bdw - it's only for BDW which doesn't use i915_bpo drm/i915/skl: Add WAC6entrylatency - it didn't end up in 4.7 Signed-off-by:
Timo Aaltonen <timo.aaltonen@canonical.com> Acked-by:
Kamal Mostafa <kamal@canonical.com>
-
Sebastian Ott authored
BugLink: http://bugs.launchpad.net/bugs/1609415 Prior to commit 1bc6664b a call to enable_cmf for a device for which channel measurement was already enabled resulted in a reset of the measurement data. What looked like bugs at the time (a 2nd allocation was triggered but failed, reset was called regardless of previous failures, and errors have not been reported to userspace) was actually something at least one userspace tool depended on. Restore that behavior in a sane way. Fixes: 1bc6664b ("s390/cio: use device_lock during cmb activation") Cc: stable@vger.kernel.org #v4.4+ Signed-off-by:
Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by:
Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by:
Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> (cherry picked from commit 0f5d050c) Signed-off-by:
Tim Gardner <tim.gardner@canonical.com> Acked-by:
-
Michael Neuling authored
BugLink: http://bugs.launchpad.net/bugs/1606786 At the start of __tm_recheckpoint() we save the kernel stack pointer (r1) in SPRG SCRATCH0 (SPRG2) so that we can restore it after the trecheckpoint. Unfortunately, the same SPRG is used in the SLB miss handler. If an SLB miss is taken between the save and restore of r1 to the SPRG, the SPRG is changed and hence r1 is also corrupted. We can end up with the following crash when we start using r1 again after the restore from the SPRG: Oops: Bad kernel stack pointer, sig: 6 [#1] SMP NR_CPUS=2048 NUMA pSeries CPU: 658 PID: 143777 Comm: htm_demo Tainted: G EL X 4.4.13-0-default #1 task: c0000b56993a7810 ti: c00000000cfec000 task.ti: c0000b56993bc000 NIP: c00000000004f188 LR: 00000000100040b8 CTR: 0000000010002570 REGS: c00000000cfefd40 TRAP: 0300 Tainted: G EL X (4.4.13-0-default) MSR: 8000000300001033 <SF,ME,IR,DR,RI,LE> CR: 02000424 XER: 20000000 CFAR: c000000000008468 DAR: 00003ffd84e66880 DSISR: 40000000 SOFTE: 0 PACATMSCRATCH: 00003ffbc865e680 GPR00: fffffffcfabc4268 00003ffd84e667a0 00000000100d8c38 000000030544bb80 GPR04: 0000000000000002 00000000100cf200 0000000000000449 00000000100cf100 GPR08: 000000000000c350 0000000000002569 0000000000002569 00000000100d6c30 GPR12: 00000000100d6c28 c00000000e6a6b00 00003ffd84660000 0000000000000000 GPR16: 0000000000000003 0000000000000449 0000000010002570 0000010009684f20 GPR20: 0000000000800000 00003ffd84e5f110 00003ffd84e5f7a0 00000000100d0f40 GPR24: 0000000000000000 0000000000000000 0000000000000000 00003ffff0673f50 GPR28: 00003ffd84e5e960 00000000003d0f00 00003ffd84e667a0 00003ffd84e5e680 NIP [c00000000004f188] restore_gprs+0x110/0x17c LR [00000000100040b8] 0x100040b8 Call Trace: Instruction dump: f8a1fff0 e8e700a8 38a00000 7ca10164 e8a1fff8 e821fff0 7c0007dd 7c421378 7db142a6 7c3242a6 38800002 7c810164 <e9c100e0> e9e100e8 ea0100f0 ea2100f8 We hit this on large memory machines (> 2TB) but it can also be hit on smaller machines when 1TB segments are disabled. To hit this, you also need to be virtualised to ensure SLBs are periodically removed by the hypervisor. This patches moves the saving of r1 to the SPRG to the region where we are guaranteed not to take any further SLB misses. Fixes: 98ae22e1 ("powerpc: Add helper functions for transactional memory context switching") Cc: stable@vger.kernel.org # v3.9+ Signed-off-by:
Michael Neuling <mikey@neuling.org> Acked-by:
Cyril Bur <cyrilbur@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> (cherry picked from commit 6bcb8014) Signed-off-by:
-
Michael Neuling authored
BugLink: http://bugs.launchpad.net/bugs/1606786 Currently we have 2 segments that are bolted for the kernel linear mapping (ie 0xc000... addresses). This is 0 to 1TB and also the kernel stacks. Anything accessed outside of these regions may need to be faulted in. (In practice machines with TM always have 1T segments) If a machine has < 2TB of memory we never fault on the kernel linear mapping as these two segments cover all physical memory. If a machine has > 2TB of memory, there may be structures outside of these two segments that need to be faulted in. This faulting can occur when running as a guest as the hypervisor may remove any SLB that's not bolted. When we treclaim and trecheckpoint we have a window where we need to run with the userspace GPRs. This means that we no longer have a valid stack pointer in r1. For this window we therefore clear MSR RI to indicate that any exceptions taken at this point won't be able to be handled. This means that we can't take segment misses in this RI=0 window. In this RI=0 region, we currently access the thread_struct for the process being context switched to or from. This thread_struct access may cause a segment fault since it's not guaranteed to be covered by the two bolted segment entries described above. We've seen this with a crash when running as a guest with > 2TB of memory on PowerVM: Unrecoverable exception 4100 at c00000000004f138 Oops: Unrecoverable exception, sig: 6 [#1] SMP NR_CPUS=2048 NUMA pSeries CPU: 1280 PID: 7755 Comm: kworker/1280:1 Tainted: G X 4.4.13-46-default #1 task: c000189001df4210 ti: c000189001d5c000 task.ti: c000189001d5c000 NIP: c00000000004f138 LR: 0000000010003a24 CTR: 0000000010001b20 REGS: c000189001d5f730 TRAP: 4100 Tainted: G X (4.4.13-46-default) MSR: 8000000100001031 <SF,ME,IR,DR,LE> CR: 24000048 XER: 00000000 CFAR: c00000000004ed18 SOFTE: 0 GPR00: ffffffffc58d7b60 c000189001d5f9b0 00000000100d7d00 000000003a738288 GPR04: 0000000000002781 0000000000000006 0000000000000000 c0000d1f4d889620 GPR08: 000000000000c350 00000000000008ab 00000000000008ab 00000000100d7af0 GPR12: 00000000100d7ae8 00003ffe787e67a0 0000000000000000 0000000000000211 GPR16: 0000000010001b20 0000000000000000 0000000000800000 00003ffe787df110 GPR20: 0000000000000001 00000000100d1e10 0000000000000000 00003ffe787df050 GPR24: 0000000000000003 0000000000010000 0000000000000000 00003fffe79e2e30 GPR28: 00003fffe79e2e68 00000000003d0f00 00003ffe787e67a0 00003ffe787de680 NIP [c00000000004f138] restore_gprs+0xd0/0x16c LR [0000000010003a24] 0x10003a24 Call Trace: [c000189001d5f9b0] [c000189001d5f9f0] 0xc000189001d5f9f0 (unreliable) [c000189001d5fb90] [c00000000001583c] tm_recheckpoint+0x6c/0xa0 [c000189001d5fbd0] [c000000000015c40] __switch_to+0x2c0/0x350 [c000189001d5fc30] [c0000000007e647c] __schedule+0x32c/0x9c0 [c000189001d5fcb0] [c0000000007e6b58] schedule+0x48/0xc0 [c000189001d5fce0] [c0000000000deabc] worker_thread+0x22c/0x5b0 [c000189001d5fd80] [c0000000000e7000] kthread+0x110/0x130 [c000189001d5fe30] [c000000000009538] ret_from_kernel_thread+0x5c/0xa4 Instruction dump: 7cb103a6 7cc0e3a6 7ca222a6 78a58402 38c00800 7cc62838 08860000 7cc000a6 38a00006 78c60022 7cc62838 0b060000 <e8c701a0> 7ccff120 e8270078 e8a70098 ---[ end trace 602126d0a1dedd54 ]--- This fixes this by copying the required data from the thread_struct to the stack before we clear MSR RI. Then once we clear RI, we only access the stack, guaranteeing there's no segment miss. We also tighten the region over which we set RI=0 on the treclaim() path. This may have a slight performance impact since we're adding an mtmsr instruction. Fixes: 090b9284 ("powerpc/tm: Clear MSR RI in non-recoverable TM code") Signed-off-by:
-
Kamal Mostafa authored
BugLink: https://bugs.launchpad.net/bugs/1609204Signed-off-by:
-
AceLan Kao authored
BugLink: https://bugs.launchpad.net/bugs/1609204 This driver supports power button event in Intel Virtual Button currently. New Dell XPS 13 requires this driver for the power button. This driver is copied/modified from intel-hid.c Most credit goes to the author of intel-hid.c, Alex Hung <alex.hung@canonical.com> Signed-off-by:
AceLan Kao <acelan.kao@canonical.com> Signed-off-by:
Darren Hart <dvhart@linux.intel.com> (cherry picked from commit 332e0812) Signed-off-by:
-
Alex Hung authored
BugLink: http://bugs.launchpad.net/bugs/1608762 Dell Optiplex 7450 AIO works with BOOT_ACPI; however, the quirk for "OptiPlex 745" changes its boot method to BOOT_BIOS and causes 7450 AIO hangs when rebooting; as a result, 7450 AIO is appended to overwrite BOOT_BIOS by BOOT_ACPI in order not to break the original 745 series Signed-off-by:
Alex Hung <alex.hung@canonical.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by:
Ingo Molnar <mingo@kernel.org> (cherry picked from commit 4d581259) Signed-off-by:
-
Kamal Mostafa authored
Commit 27a41a83 ("xhci: Cleanup only when releasing primary hcd") causes a soft lockup at boot when XHCI_STATE_HALTED, preventing VirtualBox 5.1.x from booting if USB3.0 is enabled. Revert to allowing xhci_irq to handle the interrupt when XHCI_STATE_HALTED but not XHCI_STATE_DYING. Fixes: 27a41a83 ("xhci: Cleanup only when releasing primary hcd") BugLink: https://bugs.launchpad.net/bugs/1604058Signed-off-by:
-
Christoph Hellwig authored
BugLink: http://bugs.launchpad.net/bugs/1597908 Timer context is not very useful for drivers to perform any meaningful abort action from. So instead of calling the driver from this useless context defer it to a workqueue as soon as possible. Note that while a delayed_work item would seem the right thing here I didn't dare to use it due to the magic in blk_add_timer that pokes deep into timer internals. But maybe this encourages Tejun to add a sensible API for that to the workqueue API and we'll all be fine in the end :) Contains a major update from Keith Bush: "This patch removes synchronizing the timeout work so that the timer can start a freeze on its own queue. The timer enters the queue, so timer context can only start a freeze, but not wait for frozen." Signed-off-by:
Christoph Hellwig <hch@lst.de> Acked-by:
Keith Busch <keith.busch@intel.com> Signed-off-by:
Jens Axboe <axboe@fb.com> (cherry picked from commit 287922eb) Signed-off-by:
Joseph Salisbury <joseph.salisbury@canonical.com> Acked-by:
-
Jesse Gross authored
If a packet is either locally encapsulated or processed through GRO it is marked with the offloads that it requires. However, when it is decapsulated these tunnel offload indications are not removed. This means that if we receive an encapsulated TCP packet, aggregate it with GRO, decapsulate, and retransmit the resulting frame on a NIC that does not support encapsulation, we won't be able to take advantage of hardware offloads even though it is just a simple TCP packet at this point. This fixes the problem by stripping off encapsulation offload indications when packets are decapsulated. The performance impacts of this bug are significant. In a test where a Geneve encapsulated TCP stream is sent to a hypervisor, GRO'ed, decapsulated, and bridged to a VM performance is improved by 60% (5Gbps->8Gbps) as a result of avoiding unnecessary segmentation at the VM tap interface. Reported-by:
Ramu Ramamurthy <sramamur@linux.vnet.ibm.com> Fixes: 68c33163 ("v4 GRE: Add TCP segmentation offload for GRE") Signed-off-by:
Jesse Gross <jesse@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net> BugLink: http://bugs.launchpad.net/bugs/1602755 (backported from commit a09a4c8d) [adapt iptunnel_pull_header arguments, avoid 7f290c94] Signed-off-by:
Andy Whitcroft <apw@canonical.com> Signed-off-by:
-
Guilherme G. Piccoli authored
BugLink: http://bugs.launchpad.net/bugs/1607387 The be2net driver performs fw temperature queries on be_worker() routine, which is executed each second for each be_adapter. There is a frequency threshold to avoid fw query to happens at each call to be_worker(); instead, currently a fw query occurs once in 64 runs of the procedure. Nevertheless, this fw temperature query is invoked only for adapters which interface is up, so we can see I/O errors on read of hwmon counters from userspace (from tools like lm-sensors) in case we have adapters' functions which interface is down. This patch moves the fw query code to be invoked even if interface is down. No functional changes were introduced. Signed-off-by:
Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Acked-by:
Sathya Perla <sathya.perla@broadcom.com> Signed-off-by:
-
Mario Limonciello authored
BugLink: http://bugs.launchpad.net/bugs/1579984 The RTL8153-AD supports a persistent system specific MAC address. This means a device plugged into two different systems with host side support will show different (but persistent) MAC addresses. This information for the system's persistent MAC address is burned in when the system HW is built and available under \_SB.AMAC in the DSDT at runtime. This technology is currently implemented in the Dell TB15 and WD15 Type-C docks. More information is available here: http://www.dell.com/support/article/us/en/04/SLN301147Signed-off-by:
Mario Limonciello <mario_limonciello@dell.com> Signed-off-by:
-
Shrikrishna Khare authored
BugLink: http://bugs.launchpad.net/bugs/1605494 For IPv6, if the device indicates that the checksum is correct, set CHECKSUM_UNNECESSARY. Reported-by:
Subbarao Narahari <snarahari@vmware.com> Signed-off-by:
Shrikrishna Khare <skhare@vmware.com> Signed-off-by:
Jin Heo <heoj@vmware.com> Signed-off-by:
-
Mauricio Faria de Oliveira authored
BugLink: http://bugs.launchpad.net/bugs/1597974 The lpfc_sli4_scmd_to_wqidx_distr() function expects the scsi_cmnd 'lpfc_cmd->pCmd' not to be null, and point to the midlayer command. That's not true in the .eh_(device|target|bus)_reset_handler path, because lpfc_send_taskmgmt() sends commands not from the midlayer, so does not set 'lpfc_cmd->pCmd'. That is true in the .queuecommand path because lpfc_queuecommand() stores the scsi_cmnd from midlayer in lpfc_cmd->pCmd; and lpfc_cmd is stored by lpfc_scsi_prep_cmnd() in piocbq->context1 -- which is passed to lpfc_sli4_scmd_to_wqidx_distr() as lpfc_cmd parameter. This problem can be hit on SCSI EH, and immediately with sg_reset. These 2 test-cases demonstrate the problem/fix with next-20160601. Test-case 1) sg_reset # strace sg_reset --device /dev/sdm <...> open("/dev/sdm", O_RDWR|O_NONBLOCK) = 3 ioctl(3, SG_SCSI_RESET, 0x3fffde6d0994 <unfinished ...> +++ killed by SIGSEGV +++ Segmentation fault # dmesg Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xd00000001c88442c Oops: Kernel access of bad area, sig: 11 [#1] <...> CPU: 104 PID: 16333 Comm: sg_reset Tainted: G W 4.7.0-rc1-next-20160601-00004-g95b89dc #6 <...> NIP [d00000001c88442c] lpfc_sli4_scmd_to_wqidx_distr+0xc/0xd0 [lpfc] LR [d00000001c826fe8] lpfc_sli_calc_ring.part.27+0x98/0xd0 [lpfc] Call Trace: [c000003c9ec876f0] [c000003c9ec87770] 0xc000003c9ec87770 (unreliable) [c000003c9ec87720] [d00000001c82e004] lpfc_sli_issue_iocb+0xd4/0x260 [lpfc] [c000003c9ec87780] [d00000001c831a3c] lpfc_sli_issue_iocb_wait+0x15c/0x5b0 [lpfc] [c000003c9ec87880] [d00000001c87f27c] lpfc_send_taskmgmt+0x24c/0x650 [lpfc] [c000003c9ec87950] [d00000001c87fd7c] lpfc_device_reset_handler+0x10c/0x200 [lpfc] [c000003c9ec87a10] [c000000000610694] scsi_try_bus_device_reset+0x44/0xc0 [c000003c9ec87a40] [c0000000006113e8] scsi_ioctl_reset+0x198/0x2c0 [c000003c9ec87bf0] [c00000000060fe5c] scsi_ioctl+0x13c/0x4b0 [c000003c9ec87c80] [c0000000006629b0] sd_ioctl+0xf0/0x120 [c000003c9ec87cd0] [c00000000046e4f8] blkdev_ioctl+0x248/0xb70 [c000003c9ec87d30] [c0000000002a1f60] block_ioctl+0x70/0x90 [c000003c9ec87d50] [c00000000026d334] do_vfs_ioctl+0xc4/0x890 [c000003c9ec87de0] [c00000000026db60] SyS_ioctl+0x60/0xc0 [c000003c9ec87e30] [c000000000009120] system_call+0x38/0x108 Instruction dump: <...> With fix: # strace sg_reset --device /dev/sdm <...> open("/dev/sdm", O_RDWR|O_NONBLOCK) = 3 ioctl(3, SG_SCSI_RESET, 0x3fffe103c554) = 0 close(3) = 0 exit_group(0) = ? +++ exited with 0 +++ # dmesg [ 424.658649] lpfc 0006:01:00.4: 4:(0):0713 SCSI layer issued Device Reset (1, 0) return x2002 Test-case 2) SCSI EH Using this debug patch to wire an SCSI EH trigger, for lpfc_scsi_cmd_iocb_cmpl(): - cmd->scsi_done(cmd); + if ((phba->pport ? phba->pport->cfg_log_verbose : phba->cfg_log_verbose) == 0x32100000) + printk(KERN_ALERT "lpfc: skip scsi_done()\n"); + else + cmd->scsi_done(cmd); # echo 0x32100000 > /sys/class/scsi_host/host11/lpfc_log_verbose # dd if=/dev/sdm of=/dev/null iflag=direct & <...> After a while: # dmesg lpfc 0006:01:00.4: 4:(0):3053 lpfc_log_verbose changed from 0 (x0) to 839909376 (x32100000) lpfc: skip scsi_done() <...> Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xd0000000199e448c Oops: Kernel access of bad area, sig: 11 [#1] <...> CPU: 96 PID: 28556 Comm: scsi_eh_11 Tainted: G W 4.7.0-rc1-next-20160601-00004-g95b89dc #6 <...> NIP [d0000000199e448c] lpfc_sli4_scmd_to_wqidx_distr+0xc/0xd0 [lpfc] LR [d000000019986fe8] lpfc_sli_calc_ring.part.27+0x98/0xd0 [lpfc] Call Trace: [c000000ff0d0b890] [c000000ff0d0b900] 0xc000000ff0d0b900 (unreliable) [c000000ff0d0b8c0] [d00000001998e004] lpfc_sli_issue_iocb+0xd4/0x260 [lpfc] [c000000ff0d0b920] [d000000019991a3c] lpfc_sli_issue_iocb_wait+0x15c/0x5b0 [lpfc] [c000000ff0d0ba20] [d0000000199df27c] lpfc_send_taskmgmt+0x24c/0x650 [lpfc] [c000000ff0d0baf0] [d0000000199dfd7c] lpfc_device_reset_handler+0x10c/0x200 [lpfc] [c000000ff0d0bbb0] [c000000000610694] scsi_try_bus_device_reset+0x44/0xc0 [c000000ff0d0bbe0] [c0000000006126cc] scsi_eh_ready_devs+0x49c/0x9c0 [c000000ff0d0bcb0] [c000000000614160] scsi_error_handler+0x580/0x680 [c000000ff0d0bd80] [c0000000000ae848] kthread+0x108/0x130 [c000000ff0d0be30] [c0000000000094a8] ret_from_kernel_thread+0x5c/0xb4 Instruction dump: <...> With fix: # dmesg lpfc 0006:01:00.4: 4:(0):3053 lpfc_log_verbose changed from 0 (x0) to 839909376 (x32100000) lpfc: skip scsi_done() <...> lpfc 0006:01:00.4: 4:(0):0713 SCSI layer issued Device Reset (0, 0) return x2002 <...> lpfc 0006:01:00.4: 4:(0):0723 SCSI layer issued Target Reset (1, 0) return x2002 <...> lpfc 0006:01:00.4: 4:(0):0714 SCSI layer issued Bus Reset Data: x2002 <...> lpfc 0006:01:00.4: 4:(0):3172 SCSI layer issued Host Reset Data: <...> Fixes: 8b0dff14 ("lpfc: Add support for using block multi-queue") Signed-off-by:
Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Signed-off-by:
James Smart <james.smart@broadcom.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
-
Uma Krishnan authored
BugLink: http://bugs.launchpad.net/bugs/1605405 If an EEH or some other hard error occurs while the adapter instance was being initialized, on the subsequent shutdown of the device, the system could crash with: [c000000f1da03b60] c0000000005eccfc pci_device_shutdown+0x6c/0x100 [c000000f1da03ba0] c0000000006d67d4 device_shutdown+0x1b4/0x2c0 [c000000f1da03c40] c0000000000ea30c kernel_restart_prepare+0x5c/0x80 [c000000f1da03c70] c0000000000ea48c kernel_restart+0x2c/0xc0 [c000000f1da03ce0] c0000000000ea970 SyS_reboot+0x1c0/0x2d0 [c000000f1da03e30] c000000000009204 system_call+0x38/0xb4 This crash is due to the AFU not being mapped when the shutdown notification routine is called and is a regression that was inserted recently with Commit 704c4b0d ("cxlflash: Shutdown notify support for CXL Flash cards"). As a fix, shutdown notification should only occur when the AFU is mapped. Fixes: 704c4b0d ("cxlflash: Shutdown notify support for CXL Flash cards") Signed-off-by:
Uma Krishnan <ukrishn@linux.vnet.ibm.com> Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: http://bugs.launchpad.net/bugs/1607404Signed-off-by:
-
Miklos Szeredi authored
BugLink: http://bugs.launchpad.net/bugs/1607404 commit 11f37104 upstream. Unlink and rename in overlayfs checked the upper dentry for staleness by verifying upper->d_parent against upperdir. However the dentry can go stale also by being unhashed, for example. Expand the verification to actually look up the name again (under parent lock) and check if it matches the upper dentry. This matches what the VFS does before passing the dentry to filesytem's unlink/rename methods, which excludes any inconsistency caused by overlayfs. Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Mika Kahola authored
BugLink: http://bugs.launchpad.net/bugs/1607404 commit 34511dce upstream. It has been found out that in some HW combination the DisplayPort fast link training feature caused screen flickering. Let's revert this feature for now until we can ensure that the feature works for all platforms. This is a manual revert of commits 5fa836a9 ("drm/i915: DP link training optimization") and 4e96c977 ("drm/i915: eDP link training optimization"). Fixes: 5fa836a9 ("drm/i915: DP link training optimization") Fixes: 4e96c977 ("drm/i915: eDP link training optimization") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91393Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Mika Kahola <mika.kahola@intel.com> Signed-off-by:
Joakim Tjernlund <joakim.tjernlund@infinera.com> Signed-off-by:
-
Hugh Dickins authored
BugLink: http://bugs.launchpad.net/bugs/1607404 commit 7f556567 upstream. The well-spotted fallocate undo fix is good in most cases, but not when fallocate failed on the very first page. index 0 then passes lend -1 to shmem_undo_range(), and that has two bad effects: (a) that it will undo every fallocation throughout the file, unrestricted by the current range; but more importantly (b) it can cause the undo to hang, because lend -1 is treated as truncation, which makes it keep on retrying until every page has gone, but those already fully instantiated will never go away. Big thank you to xfstests generic/269 which demonstrates this. Fixes: b9b4bb26 ("tmpfs: don't undo fallocate past its last page") Signed-off-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Anthony Romano authored
BugLink: http://bugs.launchpad.net/bugs/1607404 commit b9b4bb26 upstream. When fallocate is interrupted it will undo a range that extends one byte past its range of allocated pages. This can corrupt an in-use page by zeroing out its first byte. Instead, undo using the inclusive byte range. Fixes: 1635f6a7 ("tmpfs: undo fallocation on failure") Link: http://lkml.kernel.org/r/1462713387-16724-1-git-send-email-anthony.romano@coreos.comSigned-off-by:
Anthony Romano <anthony.romano@coreos.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Brandon Philips <brandon@ifup.co> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Jan Stancek authored
BugLink: http://bugs.launchpad.net/bugs/1607404 commit 81dc0365 upstream. Parallel build can sporadically fail because asn1 headers may not be built yet by the time qat_asym_algs.o is compiled: drivers/crypto/qat/qat_common/qat_asym_algs.c:55:32: fatal error: qat_rsapubkey-asn1.h: No such file or directory #include "qat_rsapubkey-asn1.h" Signed-off-by:
Jan Stancek <jstancek@redhat.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Jan Beulich authored
BugLink: http://bugs.launchpad.net/bugs/1607404 commit 6f2d9d99 upstream. As of Xen 4.7 PV CPUID doesn't expose either of CPUID[1].ECX[7] and CPUID[0x80000007].EDX[7] anymore, causing the driver to fail to load on both Intel and AMD systems. Doing any kind of hardware capability checks in the driver as a prerequisite was wrong anyway: With the hypervisor being in charge, all such checking should be done by it. If ACPI data gets uploaded despite some missing capability, the hypervisor is free to ignore part or all of that data. Ditch the entire check_prereq() function, and do the only valid check (xen_initial_domain()) in the caller in its place. Signed-off-by:
Jan Beulich <jbeulich@suse.com> Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
-
Steve French authored
BugLink: http://bugs.launchpad.net/bugs/1607404 commit 45e8a258 upstream. POSIX allows files with trailing spaces or a trailing period but SMB3 does not, so convert these using the normal Services For Mac mapping as we do for other reserved characters such as : < > | ? * This is similar to what Macs do for the same problem over SMB3. Signed-off-by:
Steve French <steve.french@primarydata.com> Acked-by:
Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by:
-
Jerome Marchand authored
BugLink: http://bugs.launchpad.net/bugs/1607404 commit b8da344b upstream. In sess_auth_rawntlmssp_authenticate(), the ntlmssp blob is allocated statically and its size is an "empirical" 5*sizeof(struct _AUTHENTICATE_MESSAGE) (320B on x86_64). I don't know where this value comes from or if it was ever appropriate, but it is currently insufficient: the user and domain name in UTF16 could take 1kB by themselves. Because of that, build_ntlmssp_auth_blob() might corrupt memory (out-of-bounds write). The size of ntlmssp_blob in SMB2_sess_setup() is too small too (sizeof(struct _NEGOTIATE_MESSAGE) + 500). This patch allocates the blob dynamically in build_ntlmssp_auth_blob(). Signed-off-by:
Jerome Marchand <jmarchan@redhat.com> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Steve French authored
BugLink: http://bugs.launchpad.net/bugs/1607404 commit 4fcd1813 upstream. Azure server blocks clients that open a socket and don't do anything on it. In our reconnect scenarios, we can reconnect the tcp session and detect the socket is available but we defer the negprot and SMB3 session setup and tree connect reconnection until the next i/o is requested, but this looks suspicous to some servers who expect SMB3 negprog and session setup soon after a socket is created. In the echo thread, reconnect SMB3 sessions and tree connections that are disconnected. A later patch will replay persistent (and resilient) handle opens. Signed-off-by:
-
James Bottomley authored
BugLink: http://bugs.launchpad.net/bugs/1607404 commit 8beb3300 upstream. The untagged command case in the 53c700 driver has been broken since host wide tags were enabled because the replaced scsi_find_tag() function had a special case for the tag value SCSI_NO_TAG to retrieve sdev->current_cmnd. The replacement function scsi_host_find_tag() has no such special case and returns NULL causing untagged commands to trigger a BUG() in the driver. Inspection shows that the 53c700 is the only driver using this SCSI_NO_TAG case, so a local fix in the driver suffices to fix this problem globally. Fixes: 64d513ac - "scsi: use host wide tags by default" Reported-by:
Helge Deller <deller@gmx.de> Tested-by:
James Bottomley <jejb@linux.vnet.ibm.com> Reviewed-by:
Ewan D. Milne <emilne@redhat.com> Acked-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Wei Fang authored
BugLink: http://bugs.launchpad.net/bugs/1607404 commit 72d8c36e upstream. sas_ata_strategy_handler() adds the works of the ata error handler to system_unbound_wq. This workqueue asynchronously runs work items, so the ata error handler will be performed concurrently on different CPUs. In this case, ->host_failed will be decreased simultaneously in scsi_eh_finish_cmd() on different CPUs, and become abnormal. It will lead to permanently inequality between ->host_failed and ->host_busy, and scsi error handler thread won't start running. IO errors after that won't be handled. Since all scmds must have been handled in the strategy handler, just remove the decrement in scsi_eh_finish_cmd() and zero ->host_busy after the strategy handler to fix this race. Fixes: 50824d6c ("[SCSI] libsas: async ata-eh") Signed-off-by:
Wei Fang <fangwei1@huawei.com> Reviewed-by:
-
Maxim Patlasov authored
BugLink: http://bugs.launchpad.net/bugs/1607404 commit cfc9fde0 upstream. The upper dentry may become stale before we call ovl_lock_rename_workdir. For example, someone could (mistakenly or maliciously) manually unlink(2) it directly from upperdir. To ensure it is not stale, let's lookup it after ovl_lock_rename_workdir and and check if it matches the upper dentry. Essentially, it is the same problem and similar solution as in commit 11f37104 ("ovl: verify upper dentry before unlink and rename"). Signed-off-by:
Maxim Patlasov <mpatlasov@virtuozzo.com> Signed-off-by:
-
Vivek Goyal authored
BugLink: http://bugs.launchpad.net/bugs/1607404 commit 07a2daab upstream. Right now when a new overlay inode is created, we initialize overlay inode's ->i_mode from underlying inode ->i_mode but we retain only file type bits (S_IFMT) and discard permission bits. This patch changes it and retains permission bits too. This should allow overlay to do permission checks on overlay inode itself in task context. [SzM] It also fixes clearing suid/sgid bits on write. Signed-off-by:
Vivek Goyal <vgoyal@redhat.com> Reported-by:
Eryu Guan <eguan@redhat.com> Signed-off-by:
-
Thomas Petazzoni authored
BugLink: http://bugs.launchpad.net/bugs/1607404 commit c5379ba8 upstream. Until now, our understanding for HW I/O coherency to work on the Cortex-A9 based Marvell SoC was that only the PCIe regions should be mapped strongly-ordered. However, we were still encountering some deadlocks, especially when testing the CESA crypto engine. After checking with the HW designers, it was concluded that all the MMIO registers should be mapped as strongly ordered for the HW I/O coherency mechanism to work properly. This fixes some easy to reproduce deadlocks with the CESA crypto engine driver (dmcrypt on a sufficiently large disk partition). Tested-by:
Terry Stockert <stockert@inkblotadmirer.me> Tested-by:
Romain Perier <romain.perier@free-electrons.com> Cc: Terry Stockert <stockert@inkblotadmirer.me> Cc: Romain Perier <romain.perier@free-electrons.com> Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
-
Thomas Petazzoni authored
BugLink: http://bugs.launchpad.net/bugs/1607404 commit 929e604e upstream. When the support for the Marvell crypto engine was added in the Device Tree of the various Armada 385 Device Tree files in commit d716f2e8 ("ARM: mvebu: define crypto SRAM ranges for all armada-38x boards"), a typo was made in the MBus window attributes for the Armada 385 Linksys board: 0x09/0x05 are used instead of 0x19/0x15. This commit fixes this typo, which makes the CESA engines operational on Armada 385 Linksys boards. Reported-by:
-
Boris Brezillon authored
BugLink: http://bugs.launchpad.net/bugs/1607404 commit 5fc39d34 upstream. The sun4i-timer driver registers its sched_clock only if the machine is compatible with "allwinner,sun5i-a13", "allwinner,sun5i-a10s" or "allwinner,sun4i-a10". Add the missing "allwinner,sun5i-a13" string to the machine compatible. Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Fixes: 465a225f ("ARM: sun5i: Add C.H.I.P DTS") Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
-
Awais Belal authored
BugLink: http://bugs.launchpad.net/bugs/1607404 commit d716fb03 upstream. This allows the device to correctly show up as ATI HDMI rather than a generic one and allows the driver to use the available caps. Signed-off-by:
Awais Belal <awais_belal@mentor.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Peter Wu authored
BugLink: http://bugs.launchpad.net/bugs/1607404 commit ab58d8cc upstream. register_vga_switcheroo() sets the PM ops from the hda structure which is freed later in azx_free. Make sure that these ops are cleared. Caught by KASAN, initially noticed due to a general protection fault. Fixes: 246efa4a ("snd/hda: add runtime suspend/resume on optimus support (v4)") Signed-off-by:
Peter Wu <peter@lekensteyn.nl> Signed-off-by:
-
Takashi Iwai authored
BugLink: http://bugs.launchpad.net/bugs/1607404 commit f388cdcd upstream. snd_ctl_remove() has a notification for the removal event. It's superfluous when done during the device got disconnected. Although the notification itself is mostly harmless, it may potentially be harmful, and should be suppressed. Actually some components PCM may free ctl elements during the disconnect or free callbacks, thus it's no theoretical issue. This patch adds the check of card->shutdown flag for avoiding unnecessary notifications after (or during) the disconnect. Signed-off-by:
-
Takashi Iwai authored
BugLink: http://bugs.launchpad.net/bugs/1607404 commit a8ff48cb upstream. The chmap ctls assigned to PCM streams are freed in the PCM disconnect callback. However, since the disconnect callback isn't called when the card gets freed before registering, the chmap ctls may still be left assigned. They are eventually freed together with other ctls, but it may cause an Oops at pcm_chmap_ctl_private_free(), as the function refers to the assigned PCM stream, while the PCM objects have been already freed beforehand. The fix is to free the chmap ctls also at PCM free callback, not only at PCM disconnect. Reported-by:
Laxminath Kasam <b_lkasam@codeaurora.org> Signed-off-by:
-
Hui Wang authored
BugLink: http://bugs.launchpad.net/bugs/1607404 commit 8a132099 upstream. We have some Dell laptops which can't detect headset mic, the machines use the codec ALC225, they have some new pin configuration values, after adding them in the alc225 pin quirk table, they work well. Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
-
Bob Copeland authored
BugLink: http://bugs.launchpad.net/bugs/1607404 commit 81e43960 upstream. UBSAN reports the following warning from accessing path->path[-1] in set_path_power(): [ 16.078040] ================================================================================ [ 16.078124] UBSAN: Undefined behaviour in sound/pci/hda/hda_generic.c:3981:17 [ 16.078198] index -1 is out of range for type 'hda_nid_t [10]' [ 16.078270] CPU: 2 PID: 1738 Comm: modprobe Not tainted 4.7.0-rc1-wt+ #47 [ 16.078274] Hardware name: LENOVO 3443CTO/3443CTO, BIOS G6ET23WW (1.02 ) 08/14/2012 [ 16.078278] ffff8800cb246000 ffff8800cb3638b8 ffffffff815c4fe3 0000000000000032 [ 16.078286] ffff8800cb3638e0 ffffffffffffffff ffff8800cb3638d0 ffffffff8162443d [ 16.078294] ffffffffa0894200 ffff8800cb363920 ffffffff81624af7 0000000000000292 [ 16.078302] Call Trace: [ 16.078311] [<ffffffff815c4fe3>] dump_stack+0x86/0xd3 [ 16.078317] [<ffffffff8162443d>] ubsan_epilogue+0xd/0x40 [ 16.078324] [<ffffffff81624af7>] __ubsan_handle_out_of_bounds+0x67/0x70 [ 16.078335] [<ffffffffa087665f>] set_path_power+0x1bf/0x230 [snd_hda_codec_generic] [ 16.078344] [<ffffffffa087880d>] add_pin_power_ctls+0x8d/0xc0 [snd_hda_codec_generic] [ 16.078352] [<ffffffffa087f190>] ? pin_power_down_callback+0x20/0x20 [snd_hda_codec_generic] [ 16.078360] [<ffffffffa0878947>] add_all_pin_power_ctls+0x107/0x150 [snd_hda_codec_generic] [ 16.078370] [<ffffffffa08842b3>] snd_hda_gen_parse_auto_config+0x2d73/0x49e0 [snd_hda_codec_generic] [ 16.078376] [<ffffffff81173360>] ? trace_hardirqs_on_caller+0x1b0/0x2c0 [ 16.078390] [<ffffffffa089df27>] alc_parse_auto_config+0x147/0x310 [snd_hda_codec_realtek] [ 16.078402] [<ffffffffa08a332a>] patch_alc269+0x23a/0x560 [snd_hda_codec_realtek] [ 16.078417] [<ffffffffa0838644>] hda_codec_driver_probe+0xa4/0x1a0 [snd_hda_codec] [ 16.078424] [<ffffffff817bbac1>] driver_probe_device+0x101/0x380 [ 16.078430] [<ffffffff817bbdf9>] __driver_attach+0xb9/0x100 [ 16.078438] [<ffffffff817bbd40>] ? driver_probe_device+0x380/0x380 [ 16.078444] [<ffffffff817b8d20>] bus_for_each_dev+0x70/0xc0 [ 16.078449] [<ffffffff817bb087>] driver_attach+0x27/0x50 [ 16.078454] [<ffffffff817ba956>] bus_add_driver+0x166/0x2c0 [ 16.078460] [<ffffffffa0369000>] ? 0xffffffffa0369000 [ 16.078465] [<ffffffff817bd13d>] driver_register+0x7d/0x130 [ 16.078477] [<ffffffffa083816f>] __hda_codec_driver_register+0x6f/0x90 [snd_hda_codec] [ 16.078488] [<ffffffffa036901e>] realtek_driver_init+0x1e/0x1000 [snd_hda_codec_realtek] [ 16.078493] [<ffffffff8100215e>] do_one_initcall+0x4e/0x1d0 [ 16.078499] [<ffffffff8119f54d>] ? rcu_read_lock_sched_held+0x6d/0x80 [ 16.078504] [<ffffffff813701b1>] ? kmem_cache_alloc_trace+0x391/0x560 [ 16.078510] [<ffffffff812bb314>] ? do_init_module+0x28/0x273 [ 16.078515] [<ffffffff812bb387>] do_init_module+0x9b/0x273 [ 16.078522] [<ffffffff811e3782>] load_module+0x20b2/0x3410 [ 16.078527] [<ffffffff811df140>] ? m_show+0x210/0x210 [ 16.078533] [<ffffffff813b2b26>] ? kernel_read+0x66/0xe0 [ 16.078541] [<ffffffff811e4cfa>] SYSC_finit_module+0xba/0xc0 [ 16.078547] [<ffffffff811e4d1e>] SyS_finit_module+0xe/0x10 [ 16.078552] [<ffffffff81a860fc>] entry_SYSCALL_64_fastpath+0x1f/0xbd [ 16.078556] ================================================================================ Fix by checking path->depth before use. Signed-off-by:
Bob Copeland <me@bobcopeland.com> Signed-off-by:
-
Vinod Koul authored
BugLink: http://bugs.launchpad.net/bugs/1607404 commit 6858107e upstream. Kabylake-H shows up as PCI ID 0xa2f0. We missed adding this earlier with other KBL IDs. Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
