- 27 Sep, 2022 1 commit
-
-
Luiz Augusto von Dentz authored
Change that introduced the use of __check_timeout did not account for link types properly, it always assumes ACL_LINK is used thus causing hdev->acl_last_tx to be used even in case of LE_LINK and then again uses ACL_LINK with hci_link_tx_to. To fix this __check_timeout now takes the link type as parameter and then procedure to use the right last_tx based on the link type and pass it to hci_link_tx_to. Fixes: 1b1d29e5 ("Bluetooth: Make use of __check_timeout on hci_sched_le") Signed-off-by:
Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Tested-by:
David Beinder <david@beinder.at>
-
- 21 Sep, 2022 3 commits
-
-
Luiz Augusto von Dentz authored
ISO events (CIS/BIS) shall only be relevant for connection with link type of ISO_LINK, otherwise the controller is probably buggy or it is the result of fuzzer tools such as syzkaller. Signed-off-by: -
Luiz Augusto von Dentz authored
hci_debugfs_create_conn shall check if conn->debugfs has already been created and don't attempt to overwrite it. Signed-off-by: -
Luiz Augusto von Dentz authored
device_add shall not be called multiple times as stated in its documentation: 'Do not call this routine or device_register() more than once for any device structure' Syzkaller reports a bug as follows [1]: ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:33! invalid opcode: 0000 [#1] PREEMPT SMP KASAN [...] Call Trace: <TASK> __list_add include/linux/list.h:69 [inline] list_add_tail include/linux/list.h:102 [inline] kobj_kset_join lib/kobject.c:164 [inline] kobject_add_internal+0x18f/0x8f0 lib/kobject.c:214 kobject_add_varg lib/kobject.c:358 [inline] kobject_add+0x150/0x1c0 lib/kobject.c:410 device_add+0x368/0x1e90 drivers/base/core.c:3452 hci_conn_add_sysfs+0x9b/0x1b0 net/bluetooth/hci_sysfs.c:53 hci_le_cis_estabilished_evt+0x57c/0xae0 net/bluetooth/hci_event.c:6799 hci_le_meta_evt+0x2b8/0x510 net/bluetooth/hci_event.c:7110 hci_event_func net/bluetooth/hci_event.c:7440 [inline] hci_event_packet+0x63d/0xfd0 net/bluetooth/hci_event.c:7495 hci_rx_work+0xae7/0x1230 net/bluetooth/hci_core.c:4007 process_one_work+0x991/0x1610 kernel/workqueue.c:2289 worker_thread+0x665/0x1080 kernel/workqueue.c:2436 kthread+0x2e4/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306 </TASK> Link: https://syzkaller.appspot.com/bug?id=da3246e2d33afdb92d66bc166a0934c5b146404aSigned-off-by:
Hawkins Jiawei <yin31149@gmail.com>
-
- 20 Sep, 2022 1 commit
-
-
Yihao Han authored
Use zeroing allocator rather than allocator followed by memset with 0 Generated by: scripts/coccinelle/api/alloc/zalloc-simple.cocci Signed-off-by:
Yihao Han <hanyihao@vivo.com> Signed-off-by:
-
- 19 Sep, 2022 3 commits
-
-
Tetsuo Handa authored
syzbot is reporting NULL pointer dereference at hci_uart_tty_close() [1], for rcu_sync_enter() is called without rcu_sync_init() due to hci_uart_tty_open() ignoring percpu_init_rwsem() failure. While we are at it, fix that hci_uart_register_device() ignores percpu_init_rwsem() failure and hci_uart_unregister_device() does not call percpu_free_rwsem(). Link: https://syzkaller.appspot.com/bug?extid=576dfca25381fb6fbc5f [1] Reported-by:
syzbot <syzbot+576dfca25381fb6fbc5f@syzkaller.appspotmail.com> Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Fixes: 67d2f878 ("Bluetooth: hci_ldisc: Allow sleeping while proto locks are held.") Fixes: d73e1728 ("Bluetooth: hci_serdev: Init hci_uart proto_lock to avoid oops") Signed-off-by:
-
Tetsuo Handa authored
syzbot is reporting attempt to schedule hdev->cmd_work work from system_wq WQ into hdev->workqueue WQ which is under draining operation [1], for commit c8efcc25 ("workqueue: allow chained queueing during destruction") does not allow such operation. The check introduced by commit 877afada ("Bluetooth: When HCI work queue is drained, only queue chained work") was incomplete. Use hdev->workqueue WQ when queuing hdev->{cmd,ncmd}_timer works because hci_{cmd,ncmd}_timeout() calls queue_work(hdev->workqueue). Also, protect the queuing operation with RCU read lock in order to avoid calling queue_delayed_work() after cancel_delayed_work() completed. Link: https://syzkaller.appspot.com/bug?extid=243b7d89777f90f7613b [1] Reported-by:
syzbot <syzbot+243b7d89777f90f7613b@syzkaller.appspotmail.com> Signed-off-by:
-
Tetsuo Handa authored
syzbot is reporting cancel_delayed_work() without INIT_DELAYED_WORK() at l2cap_chan_del() [1], for CONF_NOT_COMPLETE flag (which meant to prevent l2cap_chan_del() from calling cancel_delayed_work()) is cleared by timer which fires before l2cap_chan_del() is called by closing file descriptor created by socket(AF_BLUETOOTH, SOCK_STREAM, BTPROTO_L2CAP). l2cap_bredr_sig_cmd(L2CAP_CONF_REQ) and l2cap_bredr_sig_cmd(L2CAP_CONF_RSP) are calling l2cap_ertm_init(chan), and they call l2cap_chan_ready() (which clears CONF_NOT_COMPLETE flag) only when l2cap_ertm_init(chan) succeeded. l2cap_sock_init() does not call l2cap_ertm_init(chan), and it instead sets CONF_NOT_COMPLETE flag by calling l2cap_chan_set_defaults(). However, when connect() is requested, "command 0x0409 tx timeout" happens after 2 seconds from connect() request, and CONF_NOT_COMPLETE flag is cleared after 4 seconds from connect() request, for l2cap_conn_start() from l2cap_info_timeout() callback scheduled by schedule_delayed_work(&conn->info_timer, L2CAP_INFO_TIMEOUT); in l2cap_connect() is calling l2cap_chan_ready(). Fix this problem by initializing delayed works used by L2CAP_MODE_ERTM mode as soon as l2cap_chan_create() allocates a channel, like I did in commit be859723 ("Bluetooth: initialize skb_queue_head at l2cap_chan_create()"). Link: https://syzkaller.appspot.com/bug?extid=83672956c7aa6af698b3 [1] Reported-by:
syzbot <syzbot+83672956c7aa6af698b3@syzkaller.appspotmail.com> Signed-off-by:
-
- 15 Sep, 2022 1 commit
-
-
Luiz Augusto von Dentz authored
Due to change to switch to use lock_sock inside rfcomm_sk_state_change the socket shutdown/release procedure can cause a deadlock: rfcomm_sock_shutdown(): lock_sock(); __rfcomm_sock_close(): rfcomm_dlc_close(): __rfcomm_dlc_close(): rfcomm_dlc_lock(); rfcomm_sk_state_change(): lock_sock(); To fix this when the call __rfcomm_sock_close is now done without holding the lock_sock since rfcomm_dlc_lock exists to protect the dlc data there is no need to use lock_sock in that code path. Link: https://lore.kernel.org/all/CAD+dNTsbuU4w+Y_P7o+VEN7BYCAbZuwZx2+tH+OTzCdcZF82YA@mail.gmail.com/ Fixes: b7ce436a ("Bluetooth: switch to lock_sock in RFCOMM") Signed-off-by:
-
- 14 Sep, 2022 4 commits
-
-
Zhengping Jiang authored
Address resolution will be paused during active scan to allow any advertising reports reach the host. If LL privacy is enabled, advertising will rely on the controller to generate new RPA. If host is not using RPA, there is no need to stop advertising during active scan because there is no need to generate RPA in the controller. Signed-off-by:
Zhengping Jiang <jiangzp@google.com> Signed-off-by:
-
Daniel Golle authored
Add a new PID/VID 0e8d/0608 for MT7921K chip found on AMD RZ608 module. From /sys/kernel/debug/usb/devices: T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0e8d ProdID=0608 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us Signed-off-by:
Daniel Golle <daniel@makrotopia.org> Signed-off-by:
-
Sean Wang authored
Add VID 13D3 & PID 3583 for MediaTek MT7921 USB Bluetooth chip. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=03 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3583 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by:
Sean Wang <sean.wang@mediatek.com> Signed-off-by:
-
Tetsuo Handa authored
syzbot is again reporting attempt to cancel uninitialized work at mgmt_index_removed() [1], for setting of HCI_MGMT flag from mgmt_init_hdev() from hci_mgmt_cmd() from hci_sock_sendmsg() can race with testing of HCI_MGMT flag from mgmt_index_removed() from hci_sock_bind() due to lack of serialization via hci_dev_lock(). Since mgmt_init_hdev() is called with mgmt_chan_list_lock held, we can safely split hci_dev_test_and_set_flag() into hci_dev_test_flag() and hci_dev_set_flag(). Thus, in order to close this race, set HCI_MGMT flag after INIT_DELAYED_WORK() completed. This is a local fix based on mgmt_chan_list_lock. Lack of serialization via hci_dev_lock() might be causing different race conditions somewhere else. But a global fix based on hci_dev_lock() should deserve a future patch. Link: https://syzkaller.appspot.com/bug?extid=844c7bf1b1aa4119c5de Reported-by: syzbot+844c7bf1b1aa4119c5de@syzkaller.appspotmail.com Signed-off-by:
-
- 09 Sep, 2022 3 commits
-
-
Kiran K authored
HarrrisonPeak, CyclonePeak, SnowFieldPeak and SandyPeak controllers are marked to support HCI_QUIRK_LE_STATES. Signed-off-by:
Kiran K <kiran.k@intel.com> Signed-off-by:
Chethan T N <chethan.tumkur.narayan@intel.com> Signed-off-by:
-
Kiran K authored
Hardware variant for Magnetor core (CNVi) is added. Signed-off-by:
-
Chris Lu authored
Add VID 13D3 & PID 3578 for MediaTek MT7921 USB Bluetooth chip. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=03 Lev=01 Prnt=01 Port=07 Cnt=03 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3578 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Co-developed-by:
Chris Lu <chris.lu@mediatek.com> Signed-off-by:
-
- 08 Sep, 2022 1 commit
-
-
Luiz Augusto von Dentz authored
Recent changes breaks HCIGETDEVINFO since it changes the size of hci_dev_info. Fixes: 26afbd82 ("Bluetooth: Add initial implementation of CIS connections") Reported-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
- 06 Sep, 2022 3 commits
-
-
Luiz Augusto von Dentz authored
hci_read_buffer_size_sync shall not use HCI_OP_LE_READ_BUFFER_SIZE_V2 sinze that is LE specific, instead it is hci_le_read_buffer_size_sync version that shall use it. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216382 Fixes: 26afbd82 ("Bluetooth: Add initial implementation of CIS connections") Signed-off-by:
-
Brian Gix authored
This introduces a "Mesh UUID" and an Experimental Feature bit to the hdev mask, and depending all underlying Mesh functionality on it. Signed-off-by:
Brian Gix <brian.gix@intel.com> Signed-off-by:
-
Brian Gix authored
The patch adds state bits, storage and HCI command chains for sending and receiving Bluetooth Mesh advertising packets, and delivery to requesting user space processes. It specifically creates 4 new MGMT commands and 2 new MGMT events: MGMT_OP_SET_MESH_RECEIVER - Sets passive scan parameters and a list of AD Types which will trigger Mesh Packet Received events MGMT_OP_MESH_READ_FEATURES - Returns information on how many outbound Mesh packets can be simultaneously queued, and what the currently queued handles are. MGMT_OP_MESH_SEND - Command to queue a specific outbound Mesh packet, with the number of times it should be sent, and the BD Addr to use. Discrete advertisments are added to the ADV Instance list. MGMT_OP_MESH_SEND_CANCEL - Command to cancel a prior outbound message request. MGMT_EV_MESH_DEVICE_FOUND - Event to deliver entire received Mesh Advertisement packet, along with timing information. MGMT_EV_MESH_PACKET_CMPLT - Event to indicate that an outbound packet is no longer queued for delivery. Signed-off-by:
-
- 01 Sep, 2022 1 commit
-
-
Sean Wang authored
WMT cmd/event doesn't follow up the generic HCI cmd/event handling, it needs constantly polling control pipe until the host received the WMT event, thus, we should require to specifically acquire PM counter on the USB to prevent the interface from entering auto suspended while WMT cmd/event in progress. Fixes: a1c49c43 ("Bluetooth: btusb: Add protocol support for MediaTek MT7668U USB devices") Co-developed-by:
Jing Cai <jing.cai@mediatek.com> Signed-off-by:
-
- 31 Aug, 2022 6 commits
-
-
Larry Finger authored
A new Bluetooth device for the Realtek RTW8852AE has been noted. This device has the following lsusb output: Bus 001 Device 003: ID 0cb8:c549 Opticis Co., Ltd Bluetooth Radio The pertinent part of /sys/kernel/debug/usb/devices is as follows: T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cb8 ProdID=c549 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Szabolcs Sipos authored
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=7392 ProdID=c611 Rev= 2.00 S: Manufacturer=Realtek S: Product=Edimax Bluetooth Adapter S: SerialNumber=XXXXXXXXXXXX C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by:
Szabolcs Sipos <labuwx@balfug.com> Signed-off-by:
-
Szabolcs Sipos authored
Based on photos available from the FCC, all currently supported RTL8761B series USB dongles have the same chip: RTL8761BUV. rtl8761bu is often used to refer to this chip. rtl8761b sometimes refers to this chip, and other times to its UART variant (RTL8761BTV). +----------------+---------+---------+---------------+ | Dongle | USB VID | USB PID | FCC ID | +----------------+---------+---------+---------------+ | ASUS USB-BT500 | 0x0b05 | 0x190e | MSQ-USBBTJB00 | | TP-Link UB500 | 0x2357 | 0x0604 | 2AXJ4UB500 | | EDUP EP-B3519 | | | 2AHRD-EPB3519 | | EDUP EP-B3536 | | | 2AHRDEP-B3536 | | UGREEN CM390 | | | 2AQI5-CM390 | +----------------+---------+---------+---------------+ Signed-off-by:
-
Max Chou authored
Add the support ID(0x13D3, 0x3592) to usb_device_id table for Realtek RTL8852C. The device info from /sys/kernel/debug/usb/devices as below. T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3592 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by:
Max Chou <max.chou@realtek.com> Signed-off-by:
-
Brian Gix authored
hci_abort_conn() is a wrapper around a number of DISCONNECT and CREATE_CONN_CANCEL commands that was being invoked from hci_request request queues, which are now deprecated. There are two versions: hci_abort_conn() which can be invoked from the hci_event thread, and hci_abort_conn_sync() which can be invoked within a hci_sync cmd chain. Signed-off-by:
-
Brian Gix authored
The HCI_OP_READ_ENC_KEY_SIZE command is converted from using the deprecated hci_request mechanism to use hci_send_cmd, with an accompanying hci_cc_read_enc_key_size to handle it's return response. Signed-off-by:
-
- 25 Aug, 2022 13 commits
-
-
Zhengping Jiang authored
When disconnecting all devices, hci_conn_failed is used to cleanup hci_conn object when the hci_conn object cannot be aborted. The function hci_conn_failed requires the caller holds hdev->lock. Fixes: 9b3628d7 ("Bluetooth: hci_sync: Cleanup hci_conn if it cannot be aborted") Signed-off-by:
-
Wolfram Sang authored
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
-
Archie Pusaka authored
To prevent multiple conn complete events, we shouldn't look up the conn with hci_lookup_le_connect, since it requires the state to be BT_CONNECT. By the time the duplicate event is processed, the state might have changed, so we end up processing the new event anyway. Change the lookup function to hci_conn_hash_lookup_ba. Fixes: d5ebaa7c ("Bluetooth: hci_event: Ignore multiple conn complete events") Signed-off-by:
Archie Pusaka <apusaka@chromium.org> Reviewed-by:
Sonny Sasaka <sonnysasaka@chromium.org> Signed-off-by:
-
Luiz Augusto von Dentz authored
In order to properly handle shutdown syscall the code shall not assume that the how argument is always SHUT_RDWR resulting in SHUTDOWN_MASK as that would result in poll to immediately report EPOLLHUP instead of properly waiting for disconnect_cfm (Disconnect Complete) which is rather important for the likes of BAP as the CIG may need to be reprogrammed. Fixes: ccf74f23 ("Bluetooth: Add BTPROTO_ISO socket type") Signed-off-by:
-
Tetsuo Handa authored
syzbot is reporting double kfree() at remove_adv_monitor() [1], for commit 7cf5c297 ("Bluetooth: hci_sync: Refactor remove Adv Monitor") forgot to remove duplicated mgmt_pending_remove() when merging "if (err) {" path and "if (!pending) {" path. Link: https://syzkaller.appspot.com/bug?extid=915a8416bf15895b8e07 [1] Reported-by:
syzbot <syzbot+915a8416bf15895b8e07@syzkaller.appspotmail.com> Fixes: 7cf5c297 ("Bluetooth: hci_sync: Refactor remove Adv Monitor") Signed-off-by:
-
Luiz Augusto von Dentz authored
Get Device Flags don't check if device does actually use an RPA in which case it shall only set HCI_CONN_FLAG_REMOTE_WAKEUP if LL Privacy is enabled. Signed-off-by: -
Luiz Augusto von Dentz authored
This attempts to fix the follow errors: In function 'memcmp', inlined from 'bacmp' at ./include/net/bluetooth/bluetooth.h:347:9, inlined from 'l2cap_global_chan_by_psm' at net/bluetooth/l2cap_core.c:2003:15: ./include/linux/fortify-string.h:44:33: error: '__builtin_memcmp' specified bound 6 exceeds source size 0 [-Werror=stringop-overread] 44 | #define __underlying_memcmp __builtin_memcmp | ^ ./include/linux/fortify-string.h:420:16: note: in expansion of macro '__underlying_memcmp' 420 | return __underlying_memcmp(p, q, size); | ^~~~~~~~~~~~~~~~~~~ In function 'memcmp', inlined from 'bacmp' at ./include/net/bluetooth/bluetooth.h:347:9, inlined from 'l2cap_global_chan_by_psm' at net/bluetooth/l2cap_core.c:2004:15: ./include/linux/fortify-string.h:44:33: error: '__builtin_memcmp' specified bound 6 exceeds source size 0 [-Werror=stringop-overread] 44 | #define __underlying_memcmp __builtin_memcmp | ^ ./include/linux/fortify-string.h:420:16: note: in expansion of macro '__underlying_memcmp' 420 | return __underlying_memcmp(p, q, size); | ^~~~~~~~~~~~~~~~~~~ Fixes: 332f1795 ("Bluetooth: L2CAP: Fix l2cap_global_chan_by_psm regression") Signed-off-by: -
Luiz Augusto von Dentz authored
This attempts to fix suspend performance when there is no connections by not updating the event mask. Fixes: ef61b6ea ("Bluetooth: Always set event mask on suspend") Signed-off-by:
-
Hans de Goede authored
Commit c8992cff ("Bluetooth: hci_event: Use of a function table to handle Command Complete") was (presumably) meant to only refactor things without any functional changes. But it does have one undesirable side-effect, before *status would always be set to skb->data[0] and it might be overridden by some of the opcode specific handling. While now it always set by the opcode specific handlers. This means that if the opcode is not known *status does not get set any more at all! This behavior change has broken bluetooth support for BCM4343A0 HCIs, the hci_bcm.c code tries to configure UART attached HCIs at a higher baudraute using vendor specific opcodes. The BCM4343A0 does not support this and this used to simply fail: [ 25.646442] Bluetooth: hci0: BCM: failed to write clock (-56) [ 25.646481] Bluetooth: hci0: Failed to set baudrate After which things would continue with the initial baudraute. But now that hci_cmd_complete_evt() no longer sets status for unknown opcodes *status is left at 0. This causes the hci_bcm.c code to think the baudraute has been changed on the HCI side and to also adjust the UART baudrate, after which communication with the HCI is broken, leading to: [ 28.579042] Bluetooth: hci0: command 0x0c03 tx timeout [ 36.961601] Bluetooth: hci0: BCM: Reset failed (-110) And non working bluetooth. Fix this by restoring the previous default "*status = skb->data[0]" handling for unknown opcodes. Fixes: c8992cff ("Bluetooth: hci_event: Use of a function table to handle Command Complete") Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Brian Gix authored
hci_update_adv_data() is called from hci_event and hci_core due to events from the controller. The prior function used the deprecated hci_request method, and the new one uses hci_sync.c Signed-off-by:
-
Brian Gix authored
This function has no dependencies on the deprecated hci_request mechanism, so has been moved unchanged to hci_sync.c Signed-off-by:
-
Brian Gix authored
This patch deletes a whole bunch of code no longer reached because the functionality was recoded using hci_sync.c Signed-off-by:
-
Brian Gix authored
The Advertising Instance expiration timer adv_instance_expire was handled with the deprecated hci_request mechanism, rather than it's replacement: hci_sync. Signed-off-by:
-
