- 01 Feb, 2017 1 commit
-
-
Christoffer Dall authored
The only benefit of having kvm_vgic_inject_mapped_irq separate from kvm_vgic_inject_irq is that we pass a boolean that we use for error checking on the injection path. While this could potentially help in some aspect of robustness, it's also a little bit of a defensive move, and arguably callers into the vgic should have make sure they have marked their virtual IRQs as mapped if required. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
-
- 30 Jan, 2017 11 commits
-
-
Marc Zyngier authored
KVM_MEMSLOT_INCOHERENT is not used anymore, as we've killed its only use in the arm/arm64 MMU code. Let's remove the last artifacts. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
Marc Zyngier authored
Now that we unconditionally flush newly mapped pages to the PoC, there is no need to care about the "uncached" status of individual pages - they must all be visible all the way down. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
Marc Zyngier authored
When we fault in a page, we flush it to the PoC (Point of Coherency) if the faulting vcpu has its own caches off, so that it can observe the page we just brought it. But if the vcpu has its caches on, we skip that step. Bad things happen when *another* vcpu tries to access that page with its own caches disabled. At that point, there is no garantee that the data has made it to the PoC, and we access stale data. The obvious fix is to always flush to PoC when a page is faulted in, no matter what the state of the vcpu is. Cc: stable@vger.kernel.org Fixes: 2d58b733 ("arm64: KVM: force cache clean on page fault when caches are off") Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
Vijaya Kumar K authored
Update error code returned for Invalid CPU interface register value and access in AArch32 mode. Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@cavium.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
Vijaya Kumar K authored
Userspace requires to store and restore of line_level for level triggered interrupts using ioctl KVM_DEV_ARM_VGIC_GRP_LEVEL_INFO. Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@cavium.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
Vijaya Kumar K authored
VGICv3 CPU interface registers are accessed using KVM_DEV_ARM_VGIC_CPU_SYSREGS ioctl. These registers are accessed as 64-bit. The cpu MPIDR value is passed along with register id. It is used to identify the cpu for registers access. The VM that supports SEIs expect it on destination machine to handle guest aborts and hence checked for ICC_CTLR_EL1.SEIS compatibility. Similarly, VM that supports Affinity Level 3 that is required for AArch64 mode, is required to be supported on destination machine. Hence checked for ICC_CTLR_EL1.A3V compatibility. The arch/arm64/kvm/vgic-sys-reg-v3.c handles read and write of VGIC CPU registers for AArch64. For AArch32 mode, arch/arm/kvm/vgic-v3-coproc.c file is created but APIs are not implemented. Updated arch/arm/include/uapi/asm/kvm.h with new definitions required to compile for AArch32. The version of VGIC v3 specification is defined here Documentation/virtual/kvm/devices/arm-vgic-v3.txt Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@cavium.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
Vijaya Kumar K authored
ICC_VMCR_EL2 supports virtual access to ICC_IGRPEN1_EL1.Enable and ICC_IGRPEN0_EL1.Enable fields. Add grpen0 and grpen1 member variables to struct vmcr to support read and write of these fields. Also refactor vgic_set_vmcr and vgic_get_vmcr() code. Drop ICH_VMCR_CTLR_SHIFT and ICH_VMCR_CTLR_MASK macros and instead use ICH_VMCR_EOI* and ICH_VMCR_CBPR* macros. Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@cavium.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
Vijaya Kumar K authored
Define register definitions for ICH_VMCR_EL2, ICC_CTLR_EL1 and ICH_VTR_EL2, ICC_BPR0_EL1, ICC_BPR1_EL1 registers. Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@cavium.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
Vijaya Kumar K authored
In order to implement vGICv3 CPU interface access, we will need to perform table lookup of system registers. We would need both index_to_params() and find_reg() exported for that purpose, but instead we export a single function which combines them both. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@cavium.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
Vijaya Kumar K authored
VGICv3 Distributor and Redistributor registers are accessed using KVM_DEV_ARM_VGIC_GRP_DIST_REGS and KVM_DEV_ARM_VGIC_GRP_REDIST_REGS with KVM_SET_DEVICE_ATTR and KVM_GET_DEVICE_ATTR ioctls. These registers are accessed as 32-bit and cpu mpidr value passed along with register offset is used to identify the cpu for redistributor registers access. The version of VGIC v3 specification is defined here Documentation/virtual/kvm/devices/arm-vgic-v3.txt Also update arch/arm/include/uapi/asm/kvm.h to compile for AArch32 mode. Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@cavium.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
Vijaya Kumar K authored
Read and write of some registers like ISPENDR and ICPENDR from userspace requires special handling when compared to guest access for these registers. Refer to Documentation/virtual/kvm/devices/arm-vgic-v3.txt for handling of ISPENDR, ICPENDR registers handling. Add infrastructure to support guest and userspace read and write for the required registers Also moved vgic_uaccess from vgic-mmio-v2.c to vgic-mmio.c Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@cavium.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
-
- 25 Jan, 2017 2 commits
-
-
Christoffer Dall authored
Add a file to debugfs to read the in-kernel state of the vgic. We don't do any locking of the entire VGIC state while traversing all the IRQs, so if the VM is running the user/developer may not see a quiesced state, but should take care to pause the VM using facilities in user space for that purpose. We also don't support LPIs yet, but they can be added easily if needed. Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Tested-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
-
Christoffer Dall authored
One of the goals behind the VGIC redesign was to get rid of cached or intermediate state in the data structures, but we decided to allow ourselves to precompute the pending value of an IRQ based on the line level and pending latch state. However, this has now become difficult to base proper GICv3 save/restore on, because there is a potential to modify the pending state without knowing if an interrupt is edge or level configured. See the following post and related message for more background: https://lists.cs.columbia.edu/pipermail/kvmarm/2017-January/023195.html This commit gets rid of the precomputed pending field in favor of a function that calculates the value when needed, irq_is_pending(). The soft_pending field is renamed to pending_latch to represent that this latch is the equivalent hardware latch which gets manipulated by the input signal for edge-triggered interrupts and when writing to the SPENDR/CPENDR registers. After this commit save/restore code should be able to simply restore the pending_latch state, line_level state, and config state in any order and get the desired result. Reviewed-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Tested-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
-
- 22 Jan, 2017 10 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fix from Thomas Gleixner: "Restore the retrigger callbacks in the IO APIC irq chips. That addresses a long standing regression which got introduced with the rewrite of the x86 irq subsystem two years ago and went unnoticed so far" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/ioapic: Restore IO-APIC irq_chip retrigger callback
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull smp/hotplug fix from Thomas Gleixner: "Remove an unused variable which is a leftover from the notifier removal" * 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: cpu/hotplug: Remove unused but set variable in _cpu_down()
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds authored
Pull virtio/vhost fixes from Michael Tsirkin: "Random fixes and cleanups that accumulated over the time" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio/s390: virtio: constify virtio_config_ops structures virtio/s390: add missing \n to end of dev_err message virtio/s390: support READ_STATUS command for virtio-ccw tools/virtio/ringtest: tweaks for s390 tools/virtio/ringtest: fix run-on-all.sh for offline cpus virtio_console: fix a crash in config_work_handler vhost/scsi: silence uninitialized variable warning vhost: scsi: constify target_core_fabric_ops structures
-
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linuxLinus Torvalds authored
Pull thermal management fixes from Zhang Rui: - fix a regression that thermal zone dynamically allocated sysfs attributes are freed before they're removed, which is introduced in 4.10-rc1 (Jacob von Chorus) - fix a boot warning because deprecated hwmon API is used (Fabio Estevam) - a couple of fixes for rockchip thermal driver (Brian Norris, Caesar Wang) * 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: thermal: rockchip: fixes the conversion table thermal: core: move tz->device.groups cleanup to thermal_release thermal: thermal_hwmon: Convert to hwmon_device_register_with_info() thermal: rockchip: handle set_trips without the trip points thermal: rockchip: optimize the conversion table thermal: rockchip: fixes invalid temperature case thermal: rockchip: don't pass table structs by value thermal: rockchip: improve conversion error messages
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are a few small USB fixes for 4.10-rc5. Most of these are gadget/dwc2 fixes for reported issues, all of these have been in linux-next for a while. The last one is a single xhci WARN_ON removal to handle an issue that the dwc3 driver is hitting in the 4.10-rc tree. The warning is harmless and needs to be removed, and a "real" fix that is more complex will show up in 4.11-rc1 for this device. That last patch hasn't been in linux-next yet due to the weekend timing, but it's a "simple" WARN_ON() removal so what could go wrong? :)" Famous last words. * tag 'usb-4.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: xhci: remove WARN_ON if dma mask is not set for platform devices usb: dwc2: host: fix Wmaybe-uninitialized warning usb: dwc2: gadget: Fix GUSBCFG.USBTRDTIM value usb: gadget: udc: atmel: remove memory leak usb: dwc3: exynos fix axius clock error path to do cleanup usb: dwc2: Avoid suspending if we're in gadget mode usb: dwc2: use u32 for DT binding parameters usb: gadget: f_fs: Fix iterations on endpoints. usb: dwc2: gadget: Fix DMA memory freeing usb: gadget: composite: Fix function used to free memory
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
Pull libnvdimm fixes from Dan Williams: "Two fixes: - a regression fix for the multiple-pmem-namespace-per-region support added in 4.9. Even if an existing environment is not using that feature the act of creating and a destroying a single namespace with the ndctl utility will lead to the proliferation of extra unwanted namespace devices. - a fix for the error code returned from the pmem driver when the memcpy_mcsafe() routine returns -EFAULT. Btrfs seems to be the only block I/O consumer that tries to parse the meaning of the error code when it is non-zero. Neither of these fixes are critical, the namespace leak is awkward in that it can cause device naming to change and complicates debugging namespace initialization issues. The error code fix is included out of caution for what other consumers might be expecting -EIO for block I/O errors" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: libnvdimm, namespace: fix pmem namespace leak, delete when size set to zero pmem: return EIO on read_pmem() failure
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk fix from Stephen Boyd: "One fix for Samsung Exynos524x SoCs where recent IOMMU patches have caused some of these clocks to turn off when they were always left on before" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk/samsung: exynos542x: mark some clocks as critical
-
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arcLinus Torvalds authored
Pull ARC fixes from Vineet Gupta: - more intc updates [Yuriv] - fix module build when unwinder is turned off - IO Coherency Programming model updates - other miscellaneous * tag 'arc-4.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: Revert "ARC: mm: IOC: Don't enable IOC by default" ARC: mm: split arc_cache_init to allow __init reaping of bulk ARCv2: IOC: Use actual memory size to setup aperture size ARCv2: IOC: Adhere to progamming model guidelines to avoid DMA corruption ARCv2: IOC: refactor the IOC and SLC operations into own functions ARC: module: Fix !CONFIG_ARC_DW2_UNWIND builds ARCv2: save r30 on kernel entry as gcc uses it for code-gen ARCv2: IRQ: Call entry/exit functions for chained handlers in MCIP ARC: IRQ: Use hwirq instead of virq in mask/unmask ARC: mmu: clarify the MMUv3 programming model
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: "Two fixes for fallout from the hugetlb changes we merged this cycle. Ten other fixes, four only affect Power9, and the rest are a bit of a mixture though nothing terrible. Thanks to: Aneesh Kumar K.V, Anton Blanchard, Benjamin Herrenschmidt, Dave Martin, Gavin Shan, Madhavan Srinivasan, Nicholas Piggin, Reza Arbab" * tag 'powerpc-4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc: Ignore reserved field in DCSR and PVR reads and writes powerpc/ptrace: Preserve previous TM fprs/vsrs on short regset write powerpc/ptrace: Preserve previous fprs/vsrs on short regset write powerpc/perf: Use MSR to report privilege level on P9 DD1 selftest/powerpc: Wrong PMC initialized in pmc56_overflow test powerpc/eeh: Enable IO path on permanent error powerpc/perf: Fix PM_BRU_CMPL event code for power9 powerpc/mm: Fix little-endian 4K hugetlb powerpc/mm/hugetlb: Don't panic when we don't find the default huge page size powerpc: Fix pgtable pmd cache init powerpc/icp-opal: Fix missing KVM case and harden replay powerpc/mm: Fix memory hotplug BUG() on radix
-
- 20 Jan, 2017 16 commits
-
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Radim Krčmář: "ARM: - Fix for timer setup on VHE machines - Drop spurious warning when the timer races against the vcpu running again - Prevent a vgic deadlock when the initialization fails (for stable) s390: - Fix a kernel memory exposure (for stable) x86: - Fix exception injection when hypercall instruction cannot be patched" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: s390: do not expose random data via facility bitmap KVM: x86: fix fixing of hypercalls KVM: arm/arm64: vgic: Fix deadlock on error handling KVM: arm64: Access CNTHCTL_EL2 bit fields correctly on VHE systems KVM: arm/arm64: Fix occasional warning from the timer work function
-
Linus Torvalds authored
Merge branch 'scsi-target-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/bvanassche/linux Pull SCSI target fixes from Bart Van Assche: - two small fixes for the ibmvscsis driver - ten patches with bug fixes for the target mode of the qla2xxx driver - four patches that avoid that the "sparse" and "smatch" static analyzer tools report false positives for the qla2xxx code base * 'scsi-target-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/bvanassche/linux: qla2xxx: Disable out-of-order processing by default in firmware qla2xxx: Fix erroneous invalid handle message qla2xxx: Reduce exess wait during chip reset qla2xxx: Terminate exchange if corrupted qla2xxx: Fix crash due to null pointer access qla2xxx: Collect additional information to debug fw dump qla2xxx: Reset reserved field in firmware options to 0 qla2xxx: Set tcm_qla2xxx version to automatically track qla2xxx version qla2xxx: Include ATIO queue in firmware dump when in target mode qla2xxx: Fix wrong IOCB type assumption qla2xxx: Avoid that building with W=1 triggers complaints about set-but-not-used variables qla2xxx: Move two arrays from header files to .c files qla2xxx: Declare an array with file scope static qla2xxx: Fix indentation ibmvscsis: Fix sleeping in interrupt context ibmvscsis: Fix max transfer length
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "Just two small fixes for this -rc. One is just killing an unused variable from Keith, but the other fixes a performance regression for nbd in this series, where we inadvertently flipped when we set MSG_MORE when outputting data" * 'for-linus' of git://git.kernel.dk/linux-block: nbd: only set MSG_MORE when we have more to send blk-mq: Remove unused variable
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spiLinus Torvalds authored
Pull spi fixes from Mark Brown: "The usual small smattering of driver specific fixes. A few bits that stand out here: - the R-Car patches adding fallbacks are just adding new compatible strings to the driver so that device trees are written in a more robustly future proof fashion, this isn't strictly a fix but it's just new IDs and it's better to get it into mainline sooner to improve the ABI - the DesignWare "switch to new API part 2" patch is actually a misleadingly titled fix for a bit that got missed in the original conversion" * tag 'spi-fix-v4.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: davinci: use dma_mapping_error() spi: spi-axi: Free resources on error path spi: pxa2xx: add missed break spi: dw-mid: switch to new dmaengine_terminate_* API (part 2) spi: dw: Make debugfs name unique between instances spi: sh-msiof: Do not use C++ style comment spi: armada-3700: Set mode bits correctly spi: armada-3700: fix unsigned compare than zero on irq spi: sh-msiof: Add R-Car Gen 2 and 3 fallback bindings spi: SPI_FSL_DSPI should depend on HAS_DMA
-
git://github.com/ceph/ceph-clientLinus Torvalds authored
Pull ceph fixes from Ilya Dryomov: "Three filesystem endianness fixes (one goes back to the 2.6 era, all marked for stable) and two fixups for this merge window's patches" * tag 'ceph-for-4.10-rc5' of git://github.com/ceph/ceph-client: ceph: fix bad endianness handling in parse_reply_info_extra ceph: fix endianness bug in frag_tree_split_cmp ceph: fix endianness of getattr mask in ceph_d_revalidate libceph: make sure ceph_aes_crypt() IV is aligned ceph: fix ceph_get_caps() interruption
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfsLinus Torvalds authored
Pull overlayfs fix from Miklos Szeredi: "This fixes a regression introduced in this cycle" * 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: ovl: fix possible use after free on redirect dir lookup
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuseLinus Torvalds authored
Pull fuse fixes from Miklos Szeredi: "Fix two regressions, one introduced in 4.9 and a less recent one in 4.2" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: fix time_to_jiffies nsec sanity check fuse: clear FR_PENDING flag when moving requests out of pending queue
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "This is a set of 12 fixes including the mpt3sas one that was causing hangs on ATA passthrough. The others are a couple of zoned block device fixes, a SAS device detection bug which lead to SATA drives not being matched to bays, two qla2xxx MSI fixes, a qla2xxx req for rsp confusion caused by cut and paste, and a few other minor fixes" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: mpt3sas: fix hang on ata passthrough commands scsi: lpfc: Set elsiocb contexts to NULL after freeing it scsi: sd: Ignore zoned field for host-managed devices scsi: sd: Fix wrong DPOFUA disable in sd_read_cache_type scsi: bfa: fix wrongly initialized variable in bfad_im_bsg_els_ct_request() scsi: ses: Fix SAS device detection in enclosure scsi: libfc: Fix variable name in fc_set_wwpn scsi: lpfc: avoid double free of resource identifiers scsi: qla2xxx: remove irq_affinity_notifier scsi: qla2xxx: fix MSI-X vector affinity scsi: qla2xxx: Fix apparent cut-n-paste error. scsi: qla2xxx: Get mutex lock before checking optrom_state
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Catalin Marinas: - avoid potential stack information leak via the ptrace ABI caused by uninitialised variables - SWIOTLB DMA API fall-back allocation fix when the SWIOTLB buffer is not initialised (all RAM is suitable for 32-bit DMA masks) - fix the bad_mode function returning for unhandled exceptions coming from user space - fix name clash in __page_to_voff() * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: avoid returning from bad_mode arm64/ptrace: Reject attempts to set incomplete hardware breakpoint fields arm64/ptrace: Avoid uninitialised struct padding in fpr_set() arm64/ptrace: Preserve previous registers for short regset write arm64/ptrace: Preserve previous registers for short regset write arm64/ptrace: Preserve previous registers for short regset write arm64: mm: avoid name clash in __page_to_voff() arm64: Fix swiotlb fallback allocation
-
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linuxRadim Krčmář authored
KVM: s390: Fix for 4.10 (via kvm/master) Fix a kernel memory exposure.
-
Christian Borntraeger authored
kvm_s390_get_machine() populates the facility bitmap by copying bytes from the host results that are stored in a 256 byte array in the prefix page. The KVM code does use the size of the target buffer (2k), thus copying and exposing unrelated kernel memory (mostly machine check related logout data). Let's use the size of the source buffer instead. This is ok, as the target buffer will always be greater or equal than the source buffer as the KVM internal buffers (and thus S390_ARCH_FAC_LIST_SIZE_BYTE) cover the maximum possible size that is allowed by STFLE, which is 256 doublewords. All structures are zero allocated so we can leave bytes 256-2047 unchanged. Add a similar fix for kvm_arch_init_vm(). Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com> [found with smatch] Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> CC: stable@vger.kernel.org Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
-
Mathias Nyman authored
The warn on is a bit too much, we will anyway set the dma mask if not set previously. The main reason for this fix is that 4.10-rc1 has a dwc3 change that pass a parent sysdev dev pointer instead of setting the dma mask of its xhci platform device. xhci platform driver can then get more attributes from the sysdev than just the dma mask. The usb core and xhci changes are not yet in 4.10, and a fix like this was preferred instead of taking those big changes this late in the rc-cycle. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Zhang Rui authored
-
Anton Blanchard authored
IBM bit 31 (for the rest of us - bit 0) is a reserved field in the instruction definition of mtspr and mfspr. Hardware is encouraged to (and does) ignore it. As a result, if userspace executes an mtspr DSCR with the reserved bit set, we get a DSCR facility unavailable exception. The kernel fails to match against the expected value/mask, and we silently return to userspace to try and re-execute the same mtspr DSCR instruction. We loop forever until the process is killed. We should do something here, and it seems mirroring what hardware does is the better option vs killing the process. While here, relax the matching of mfspr PVR too. Cc: stable@vger.kernel.org Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Dave Martin authored
Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET to fill all the check pointed registers, the thread's old check pointed registers are preserved. Fixes: 9d3918f7 ("powerpc/ptrace: Enable support for NT_PPC_CVSX") Fixes: 19cbcbf7 ("powerpc/ptrace: Enable support for NT_PPC_CFPR") Cc: stable@vger.kernel.org # v4.8+ Signed-off-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-
Dave Martin authored
Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET to fill all the registers, the thread's old registers are preserved. Fixes: c6e6771b ("powerpc: Introduce VSX thread_struct and CONFIG_VSX") Cc: stable@vger.kernel.org # v2.6.27+ Signed-off-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
-