- 27 Nov, 2012 40 commits
-
-
Malcolm Priestley authored
Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Masanari Iida authored
Correct spelling typo in comments within staging/ced1401 Signed-off-by:
Masanari Iida <standby24x7@gmail.com> Signed-off-by:
-
Matt Phillips authored
Fixed coding style issues with pointers Signed-off-by:
Matt Phillips <mathewrphillips@gmail.com> Signed-off-by:
-
Ben Chan authored
This patch applies spinlock to protect access to rx / tx structs in certain call sites, which fixes the following crash in gdm_suspend. It also fixes usb_set_intfdata() in gdm_usb_probe to avoid setting an already freed phy_dev. <5>[ 4996.815018] [<7f0074b0>] (gdm_suspend+0x1c/0x2b4 [gdmwm]) from [<803020a4>] (usb_suspend_both+0x80/0x1a0) <5>[ 4996.815055] [<803020a4>] (usb_suspend_both+0x80/0x1a0) from [<80302c84>] (usb_runtime_suspend+0x38/0x64) <5>[ 4996.815089] [<80302c84>] (usb_runtime_suspend+0x38/0x64) from [<802becc0>] (__rpm_callback+0x48/0x78) <5>[ 4996.815118] [<802becc0>] (__rpm_callback+0x48/0x78) from [<802bf8dc>] (rpm_suspend+0x394/0x5ec) <5>[ 4996.815145] [<802bf8dc>] (rpm_suspend+0x394/0x5ec) from [<802c0550>] (pm_runtime_work+0x8c/0xa4) <5>[ 4996.815177] [<802c0550>] (pm_runtime_work+0x8c/0xa4) from [<800456cc>] (process_one_work+0x264/0x438) <5>[ 4996.815209] [<800456cc>] (process_one_work+0x264/0x438) from [<80045acc>] (worker_thread+0x22c/0x3b8) <5>[ 4996.815239] [<80045acc>] (worker_thread+0x22c/0x3b8) from [<8004a43c>] (kthread+0x9c/0xa8) <5>[ 4996.815270] [<8004a43c>] (kthread+0x9c/0xa8) from [<8000f160>] (kernel_thread_exit+0x0/0x8) <0>[ 4996.815295] Code: e92d4000 e8bd4000 e2800020 eb4ab9a1 (e5905000) Signed-off-by:
Ben Chan <benchan@chromium.org> Signed-off-by:
Sameer Nanda <snanda@chromium.org> Signed-off-by:
-
Devendra Naga authored
as ret is every time assigned to EINVAL in fail cases, initialise it at the beginning. Signed-off-by:
Devendra Naga <devendra.aaru@gmail.com> Signed-off-by:
-
Stefan Hajnoczi authored
The line6 drive no longer requests MIDI dumps from the device so dumprequest.c is not needed. Signed-off-by:
Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by:
-
Stefan Hajnoczi authored
The pod startup procedure dumps model data. This is no longer useful since the sysfs attrs which expose this information to userspace have been removed. The dump request wasn't been processed anymore. Signed-off-by:
-
Stefan Hajnoczi authored
The variax startup procedure dumps model data. This is no longer useful since the sysfs attrs which expose this information to userspace have been removed. The dump request wasn't been processed anymore. Signed-off-by:
-
Stefan Hajnoczi authored
The sysfs attrs to access the model dump have been removed so it's safe to drop the model_data field. The next step will be to simplify the startup process since we no longer need to fetch this data via dump requests, but that will be done in a later patch. Signed-off-by:
-
Stefan Hajnoczi authored
Signed-off-by:
-
Stefan Hajnoczi authored
The driver no longer keeps state of MIDI-accessible device parameters. Drop the buffers but be careful to keep the device startup procedure working even though we no longer store the contents of the dump request. The startup procedure will be simplified in a later patch. Signed-off-by:
-
Stefan Hajnoczi authored
Both pod.c and variax.c expose the device's MIDI parameters as sysfs attrs. Knowledge of MIDI constants should be in userspace, not in the driver. Drop the sysfs attrs and let userspace interpret parameters it cares about instead. Signed-off-by:
-
Stefan Hajnoczi authored
Since the driver no longer needs to keep state of device parameters it is no longer necessary to refresh state when messages that affect other parameters are sent. Drop the code to trigger a dump when amp/effects are changed. Signed-off-by:
-
Stefan Hajnoczi authored
Now that both pod.c and variax.c have removed their raw sysfs attrs, the CONFIG_LINE6_USB_RAW config option can be dropped. The drivers are being stripped down to just PCM and MIDI I/O so there is less state and filtering. Therefore it's no longer necessary to have a special sysfs attr to bypass the filtering ("raw"). Signed-off-by: -
Stefan Hajnoczi authored
Note that VARIAX_SYSEX_ACTIVATE was never used so drop it along with the other VARIAX_SYSEX_* constants which are now unused. Signed-off-by:
-
Stefan Hajnoczi authored
Signed-off-by:
-
Stefan Hajnoczi authored
The get_string() function has no other callers so remove it too. Signed-off-by:
-
Stefan Hajnoczi authored
Signed-off-by:
-
Stefan Hajnoczi authored
The get_string() function is no longer used so drop it too. Signed-off-by:
-
Stefan Hajnoczi authored
Signed-off-by:
-
Stefan Hajnoczi authored
Signed-off-by:
-
Stefan Hajnoczi authored
Signed-off-by:
-
Stefan Hajnoczi authored
Signed-off-by:
-
Stefan Hajnoczi authored
The pod_set_system_param_int() helper function is only used to set the monitor level. Previously it was also used to control the tuner and has special checks. These checks can now be dropped, along with the tuner constants. Signed-off-by:
-
Stefan Hajnoczi authored
The raw sysfs attr transmits MIDI messages with less filtering. This was a useful debugging tool while the staging driver still had a lot of state and filtering. It is not useful anymore since the filtering is being dropped. Signed-off-by:
-
Stefan Hajnoczi authored
It is no longer necessary to trigger on MIDI transmit messages that will change the state of the device since: 1. We've dropped the midi_postprocess sysfs attr in a previous commit so it is not possible to activate this feature anymore. 2. The other sysfs attrs that could inspect the state after a dump request have been dropped. Therefore we can safely remove this dead code. Signed-off-by:
-
Stefan Hajnoczi authored
The midi_mask_transmit sysfs attribute selects the MIDI channels on which to transmit messages. If ALSA wants to transmit a message that does not match an allowed channel, the message will be dropped. This driver feature is not really used and applications don't know how to take advantage of it. Therefore we drop it and rely on applications or MIDI sequencers to select the channels used for communication. Signed-off-by:
-
Stefan Hajnoczi authored
The midi_mask_receive sysfs attribute selects the MIDI channels on which to receive messages. There is no need to do this at the driver level, instead the MIDI application endpoints decide which channels to use. Other drivers don't implement midi_mask_receive so applications cannot make use of this feature. Therefore we drop it as part of the effort to clean up the staging driver. Signed-off-by:
-
Stefan Hajnoczi authored
Signed-off-by:
-
Stefan Hajnoczi authored
Signed-off-by:
-
Stefan Hajnoczi authored
Dropping this final tuner sysfs attr also leaves the POD_GET_SYSTEM_PARAM() macro, pod_get_system_param_string(), and pod_get_system_param_int() unused. Remove them immediately to avoid compiler warnings. POD_monitor_level is now the only SYSEX value that needs to be watched by the driver since the ALSA volume control should reflect the current monitor volume level used by the device. Therefore, drop the switch statement entirely and just check for POD_monitor_level, ignoring unknown system parameter changes. Signed-off-by:
-
Stefan Hajnoczi authored
Signed-off-by:
-
Stefan Hajnoczi authored
Signed-off-by:
-
Stefan Hajnoczi authored
Signed-off-by:
-
Stefan Hajnoczi authored
Signed-off-by:
-
Stefan Hajnoczi authored
Signed-off-by:
-
Stefan Hajnoczi authored
Signed-off-by:
-
Stefan Hajnoczi authored
Signed-off-by:
-
Stefan Hajnoczi authored
Signed-off-by:
-
Stefan Hajnoczi authored
Signed-off-by:
-
