- 19 Apr, 2023 3 commits
-
-
Greg Kroah-Hartman authored
Merge tag 'coresight-next-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-next Suzuki writes: coresight: Updates for v6.4 This is a relatively smaller update for CoreSight tracing subsystem targeting v6.4, with the following changes: - Removing Mathieu Poirier as MAINTAINER for the subsystem, with updates to CREDITS for his contributions. - Fix CoreSight ETM PMU to set the module field Signed-off-by:
Suzuki K Poulose <suzuki.poulose@arm.com> * tag 'coresight-next-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux: coresight: etm_pmu: Set the module field MAINTAINERS: Remove Mathieu Poirier as coresight maintainer
-
Greg Kroah-Hartman authored
Merge tag 'icc-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next Georgi writes: interconnect changes for 6.4 This pull request contains the interconnect changes for the 6.4-rc1 merge window, which this time are mostly cleanups. Core changes: interconnect: Skip call into provider if initial bw is zero interconnect: Use of_property_present() for testing DT property presence interconnect: drop racy registration API interconnect: drop unused icc_link_destroy() interface Driver changes: interconnect: qcom: Drop obsolete dependency on COMPILE_TEST interconnect: qcom: drop obsolete OSM_L3/EPSS defines interconnect: qcom: osm-l3: drop unuserd header inclusion interconnect: qcom: rpm: drop bogus pm domain attach interconnect: qcom: rpm: make QoS INVALID default interconnect: qcom: rpm: Add support for specifying channel num interconnect: qcom: Sort kerneldoc entries dt-bindings: interconnect: OSM L3: Add SM6375 CPUCP compatible dt-bindings: interconnect: qcom,msm8998-bwmon: Resolve MSM8998 support Signed-off-by:
Georgi Djakov <djakov@kernel.org> * tag 'icc-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc: dt-bindings: interconnect: qcom,msm8998-bwmon: Resolve MSM8998 support dt-bindings: interconnect: OSM L3: Add SM6375 CPUCP compatible interconnect: qcom: Sort kerneldoc entries interconnect: qcom: rpm: Add support for specifying channel num interconnect: qcom: rpm: make QoS INVALID default interconnect: qcom: rpm: drop bogus pm domain attach interconnect: drop unused icc_link_destroy() interface interconnect: drop racy registration API interconnect: Use of_property_present() for testing DT property presence interconnect: qcom: osm-l3: drop unuserd header inclusion interconnect: qcom: drop obsolete OSM_L3/EPSS defines interconnect: Skip call into provider if initial bw is zero interconnect: qcom: Drop obsolete dependency on COMPILE_TEST
-
Greg Kroah-Hartman authored
Merge tag 'mhi-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi into char-misc-next Manivannan writes: MHI Host ======== Core ---- - Removed the "mhi_poll()" API as there are no in-kernel users available at the moment. - Added range check for the CHDBOFF and ERDBOFF registers in case the device reports bad values. - Fixed the errno for the rest of the range checks to use -ERANGE. - Modified the event ring handlers to ring the doorbell only if there are any pending elements in the ring to process for the device. - Removed the check for EE (Execution Environment) while processing the SYS_ERR transition as it creates device recovery issues when SBL (Secondary Bootloader) crashes early. - Used mhi_tryset_pm_state() API to set the error state instead of open coding if the firmware loading fails. This avoids the race with other pm_state updates. pci_generic ----------- - Dropped the dedundant pci_{enable/disable}_pcie_error_reporting() calls from driver probe's error path as the PCI core itself takes care of that now. - Revered the commit 2d5253a0 ("bus: mhi: host: pci_generic: Add a secondary AT port to Telit FN990") as it turned out to be erroneous. This happened due to the patch adding secondary AT port for FN990 getting applied through NET and MHI trees and this caused two commits for the same functionality but one of them ended up wrong. - Added support for Foxconn T99W510 modem based on SDX24 chipset from Qualcomm. MHI Endpoint ============ - Demoted the channel not supported error log to debug as not all devices will support all channels defined in MHI spec and this may spam users. * tag 'mhi-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi: bus: mhi: host: Use mhi_tryset_pm_state() for setting fw error state bus: mhi: host: Remove duplicate ee check for syserr bus: mhi: host: Avoid ringing EV DB if there are no elements to process bus: mhi: pci_generic: Add Foxconn T99W510 bus: mhi: host: Use ERANGE for BHIOFF/BHIEOFF range check bus: mhi: host: Range check CHDBOFF and ERDBOFF bus: mhi: host: pci_generic: Revert "Add a secondary AT port to Telit FN990" bus: mhi: host: pci_generic: Drop redundant pci_enable_pcie_error_reporting() bus: mhi: ep: Demote unsupported channel error log to debug bus: mhi: host: Remove mhi_poll() API
-
- 15 Apr, 2023 1 commit
-
-
Greg Kroah-Hartman authored
Merge tag 'iio-for-6.4b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: 2nd set of IIO features and cleanups for the 6.4 cycle. A few more changes. Some were dependent on fixes that are now upstream and in char-misc-next. st,lsm6dsx: - Add an ACPI ID (SMO8B30) and mount matrix (ROTM) seen in the wild. ti,palmas - Take probe fully devm managed. - Add threshold event support (after some rework) - Stop changing the event config on suspend and resume. * tag 'iio-for-6.4b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: iio: adc: palmas: don't alter event config on suspend/resume iio: adc: palmas: add support for iio threshold events iio: adc: palmas: always reset events on unload iio: adc: palmas: move eventX_enable into palmas_adc_event iio: adc: palmas: use iio_event_direction for threshold polarity iio: adc: palmas: replace "wakeup" with "event" iio: adc: palmas: remove adc_wakeupX_data iio: adc: palmas: Take probe fully device managed. iio: imu: lsm6dsx: Add ACPI mount matrix retrieval iio: imu: lsm6dsx: Support SMO8B30 ACPI ID for LSM6DS3TR-C
-
- 14 Apr, 2023 2 commits
-
-
Suzuki K Poulose authored
struct pmu::module must be set to the module owning the PMU driver. Set this for the coresight etm_pmu. Fixes: 8e264c52 ("coresight: core: Allow the coresight core driver to be built as a module") Signed-off-by:
-
Suzuki K Poulose authored
Mathieu Poirier is no longer involved in maintainig the CoreSight self-hosted tracing subsystem. Mathieu, Thank you very much creating and maintaing the subsystem all these years ! Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20230404111117.569795-1-suzuki.poulose@arm.com
-
- 13 Apr, 2023 9 commits
-
-
Patrik Dahlström authored
The event config is controlled through the IIO events subsystem and device wakeup is controlled by /sys/devices/.../power/wakeup. Let's keep those two knobs independent. Signed-off-by:
Patrik Dahlström <risca@dalakolonin.se> Link: https://lore.kernel.org/r/20230408114825.824505-10-risca@dalakolonin.seSigned-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Patrik Dahlström authored
The palmas gpadc block has support for monitoring up to 2 ADC channels and issue an interrupt if they reach past a set threshold. This change hooks into the IIO events system and exposes to userspace the ability to configure these threshold values for each channel, but only allow up to 2 such thresholds to be enabled at any given time. Trying to enable a third channel will result in an error. Userspace is expected to input calibrated, as opposed to raw, values as threshold. However, it is not enough to do the opposite of what is done when converting the other way around. To account for tolerances in the ADC, the calculated raw threshold should be adjusted based on the ADC specifications for the device. These specifications include the integral nonlinearity (INL), offset, and gain error. To adjust the high threshold, use the following equation: (calibrated value + INL) * Gain error + offset = maximum value [1] Likewise, use the following equation for the low threshold: (calibrated value - INL) * Gain error - offset = minimum value The gain error is a combination of gain error, as listed in the datasheet, and gain error drift due to temperature and supply. The exact values for these specifications vary between palmas devices. This patch sets the values found in TWL6035, TWL6037 datasheet. [1] TI Application Report, SLIA087A, Guide to Using the GPADC in TPS65903x, TPS65917-Q1, TPS65919-Q1, and TPS65916 Devices. Signed-off-by: -
Patrik Dahlström authored
This prevents leaving the adc in freerunning mode when removing the driver. Signed-off-by:
-
Patrik Dahlström authored
It just makes more sense to have all information regarding adc events in one place. Signed-off-by:
-
Patrik Dahlström authored
Instead of having high_threshold > 0 as an indicator for upper threshold event and lower threshold event otherwise, use enum iio_event_direction instead. This is hopefully less ambiguous. Signed-off-by:
-
Patrik Dahlström authored
The palmas gpadc block has support for monitoring up to 2 ADC channels and issue an interrupt if they reach past a set threshold. This is currently used to wake up the system from sleep, but the functionality is more generic than that. As such, change the naming of functions and variables to refer to it as events instead, except during suspend and resume where wakeup still make sense. Signed-off-by:
-
Patrik Dahlström authored
It does not seem to be used by anyone and later patches in this series are made simpler by first removing this. There is now a lot of dead code that cannot be reached, until later patches revive it. Arguably, this is preferred over removing the code only to add it again. Signed-off-by:
-
Jonathan Cameron authored
Review of a recent fix highlighted that this driver could be trivially converted to be entirely devm managed. That fix should be applied to resolve the fix in a fashion easy to back port even though this change removes the relevant code. [1] https://patchwork.kernel.org/project/linux-iio/patch/20230313205029.1881745-1-risca@dalakolonin.se/Signed-off-by:
-
Jonathan Cameron authored
DSDT ROTM method seen in the wild with SMO8B30 _HID. Making assumption it is similar to that used for bmc150 plus information from Darrell that the rotation is out by 90 degrees at boot. Method (ROTM, 0, NotSerialized) { Name (RBUF, Package (0x03) { "0 -1 0", "1 0 0", "0 0 1" }) Return (RBUF) /* \_SB_.PCI0.I2C5.DEV_.ROTM.RBUF */ } Reported-by:Darrell Kavanagh <darrell.kavanagh@gmail.com> Signed-off-by:
Darrell Kavanagh <darrell.kavanagh@gmail.org> Link: https://lore.kernel.org/r/20230130201018.981024-3-jic23@kernel.orgSigned-off-by:
-
- 12 Apr, 2023 2 commits
-
-
Jonathan Cameron authored
ID seen in the wild and it is a valid ST micro ID. An offset of 1 for the device ID enum is needed when adding support for retrieving the ID from device_get_match_data() to allow detection of NULL pointer and fallback to i2c_device_id table. DSDT chunk cropped for relevant parts. Scope (_SB.PCI0.I2C5) { Device (DEV) { Name (_HID, EisaId ("SMO8B30")) // _HID: Hardware ID Name (_CID, EisaId ("SMO8B30")) // _CID: Compatible ID Name (_UID, Zero) // _UID: Unique ID Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings { Name (RBUF, ResourceTemplate () { I2cSerialBusV2 (0x006A, ControllerInitiated, 0x00061A80, AddressingMode7Bit, "\\_SB.PCI0.I2C5", 0x00, ResourceConsumer, , Exclusive, ) }) Return (RBUF) /* \_SB_.PCI0.I2C5.DEV_._CRS.RBUF */ } Method (ROTM, 0, NotSerialized) { Name (RBUF, Package (0x03) { "0 -1 0", "1 0 0", "0 0 1" }) Return (RBUF) /* \_SB_.PCI0.I2C5.DEV_.ROTM.RBUF */ } ... Link: https://lore.kernel.org/all/20230129182441.082f29d0@jic23-huawei/Reported-by: -
Greg Kroah-Hartman authored
Merge tag 'iio-for-6.4a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: 1st set of IIO new device support, features and cleanups for the 6.4 cycle. New device support * bosch,bmp280 - Add support for BMP580 - includes significant refactoring and general driver cleanup + support for non-volatile memory for trimming and config parameters. * rohm BU27034 - New driver for this 3 channel ambient light sensor. - New support library for devices where both integration time and amplifier gain are configurable. In these cases a scale change may require changing bother underlying values. This library module provides code to help with this. * st,accel - Add support for IIS328DQ (ID only as compatible wtih LIS331DL) * st,lsm6dsx - Add support for ASM330LHB automotive MEMS sensor. * ti,ads1100, ads1000 - New driver for these 16 bit ADCs. * ti,tmp117 - Add support for older tmp116 device. Includes some general driver cleanup. Staging driver drops * adi,ade7854 - Driver was a very long way from compliant with IIO infrastructure and ABI. If anyone wants a non staging version of this driver they are better off starting from scratch. Hence drop it and the associated meter.h header. Features * adi,ad7441r - Add DT binding to set sink current for digital input. * semtech,sx9324,9360 - Support older register mapping from firmware designed for windows. Core improvements. * Move iio_trigger_poll() docs to next to the implementation and add a note on expected caller context. * Rename iio_trigger_poll_chained() to iio_trigger_poll_nested() so as to use more standard / common terminology. * Improve main ABI docs references to offset and scale for raw values by making them consistent and clear. Cleanups and minor fixes: * adi,ad5592r - Add GPIO names - useful for debug. * adi,ad7441r - Fix current input, loop powered mode configuration setup. * adi,adis16475 - Fix wrong commented value for minimum advised lower rate. * adi,admv1013 - Use devm_clk_get_enabled() to reduce boilerplate. * adi,ads1210 - Fix wrong bits for writing config register (late fix and has been broken a long time so not rushed upstream) * amlogic,meson-saradc - Improve cleanup in error handling if BL30 handshake fails. * apex-embedded,stx104 - Migrate to regmap and use regmap_read_poll_timeout() to neatly handle retries. - Add local mutex to close various races. - Use define U16_MAX rather than value for limit. - Improve code readability with minor reorganization. * atmel,ad91-sama5d2 - Drop trivial dead code. * kionix,kx022a - Drop unused structure element. * linear,ltc2983 - Reorganize bindings doc to enable unevaluatedProperties to be set in one place for all child nodes. - Make binding for adi,custom-thermocouple accept signed values. * maxim,max44000 - Add OF Device matching (of_match_table was not correctly set). * maxim,max5522 - Missing static * measurement-computing,cio-dac - Fix wrong part name in comments. - Migrate to regmap. - Improve includes by replacing bitops.h with more direct bits.h * qcom,pm8xxx-xoadc - Remove a check that can never fail. * renesas,rcar-gyroadc - DT binding documentation improvements. - Tidy up an unused warning with __maybe_unused. * semtech,sx_common - Drop docs for a structure element that doesn't exist. * semtech,sx9500 - Drop ACPI_PTR() and of_match_ptr() protections that just complicate the code / block some firmware registration types that would otherwise work. * sensiron,sps30 - Comment formatting tidy up. * st,sensors - Drop duplicate text in DT binding. * st,stm32-adc - Add some missing static markings. * ti,ads1100 - Use correct return code in dev_err_probe() call. * x-powers,axp20x_adc - precursor series to simplify addition of AXP192. - General code cleanup / minor refactoring for better readabilty of code. - Switch from boolean value to mask for adc_en2 field to avoid hard coding a mask that will be different in AXP192 * tag 'iio-for-6.4a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (63 commits) MAINTAINERS: Add ROHM BU27034 iio: light: ROHM BU27034 Ambient Light Sensor dt-bindings: iio: light: Support ROHM BU27034 MAINTAINERS: Add IIO gain-time-scale helpers iio: light: Add gain-time-scale helpers doc: Make sysfs-bus-iio doc more exact iio: dac: set variable max5522_channels storage-class-specifier to static dt-bindings: iio: temperature: ltc2983: Make 'adi,custom-thermocouple' signed dt-bindings: iio: temperature: ltc2983: Fix child node unevaluated properties iio: addac: stx104: Use regmap_read_poll_timeout() for conversion poll iio: addac: stx104: Migrate to the regmap API iio: addac: stx104: Improve indentation in stx104_write_raw() iio: addac: stx104: Use define rather than hardcoded limit for write val iio: addac: stx104: Fix race condition when converting analog-to-digital iio: addac: stx104: Fix race condition for stx104_write_raw() dt-bindings: iio: st-sensors: Fix repeated text staging: iio: resolver: ads1210: fix config mode iio: adc: ti-ads1100: fix error code in probe() iio: accel: add support for IIS328DQ variant dt-bindings: iio: st-sensors: Add IIS328DQ accelerometer ...
-
- 10 Apr, 2023 22 commits
-
-
Jeffrey Hugo authored
If firmware loading fails, the controller's pm_state is updated to MHI_PM_FW_DL_ERR unconditionally. This can corrupt the pm_state as the update is not done under the proper lock, and also does not validate the state transition. The firmware loading can fail due to a detected syserr, but if MHI_PM_FW_DL_ERR is unconditionally set as the pm_state, the handling of the syserr can break when it attempts to transition from syserr detect, to syserr process. By grabbing the lock, we ensure we don't race with some other pm_state update. By using mhi_try_set_pm_state(), we check that the transition to MHI_PM_FW_DL_ERR is valid via the state machine logic. If it is not valid, then some other transition is occurring like syserr processing, and we assume that will resolve the firmware loading error. Fixes: 12e050c7 ("bus: mhi: core: Move to an error state on any firmware load failure") Cc: stable@vger.kernel.org Signed-off-by:
Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by:
Carl Vanderlip <quic_carlv@quicinc.com> Reviewed-by:
Manivannan Sadhasivam <mani@kernel.org> Link: https://lore.kernel.org/r/1681142292-27571-3-git-send-email-quic_jhugo@quicinc.comSigned-off-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
-
Jeffrey Hugo authored
If we detect a system error via intvec, we only process the syserr if the current ee is different than the last observed ee. The reason for this check is to prevent bhie from running multiple times, but with the single queue handling syserr, that is not possible. The check can cause an issue with device recovery. If PBL loads a bad SBL via BHI, but that SBL hangs before notifying the host of an ee change, then issuing soc_reset to crash the device and retry (after supplying a fixed SBL) will not recover the device as the host will observe a PBL->PBL transition and not process the syserr. The device will be stuck until either the driver is reloaded, or the host is rebooted. Instead, remove the check so that we can attempt to recover the device. Fixes: ef2126c4 ("bus: mhi: core: Process execution environment changes serially") Cc: stable@vger.kernel.org Signed-off-by:
-
Vivek Pernamitta authored
Currently, mhi_process_data_event_ring()/mhi_process_ctrl_ev_ring() APIs are ringing DB even if there are no ring elements to process. This could cause the device to process the DB event in the absence of ring elements. So to avoid this unnecessary device processing, let's ring event DB only if there are any ring elements to process. Signed-off-by:
Vivek Pernamitta <quic_vpernami@quicinc.com> Reviewed-by:
-
Matti Vaittinen authored
Add myself as a maintainer for ROHM BU27034 ALS driver. Signed-off-by:
Matti Vaittinen <mazziesaccount@gmail.com> Link: https://lore.kernel.org/r/eac4b5f7fc8adcaac59ffa73e46cd7bb9c90edfa.1680263956.git.mazziesaccount@gmail.comSigned-off-by:
-
Matti Vaittinen authored
ROHM BU27034 is an ambient light sensor with 3 channels and 3 photo diodes capable of detecting a very wide range of illuminance. Typical application is adjusting LCD and backlight power of TVs and mobile phones. Add initial support for the ROHM BU27034 ambient light sensor. NOTE: - Driver exposes 4 channels. One IIO_LIGHT channel providing the calculated lux values based on measured data from diodes #0 and #1. In addition, 3 IIO_INTENSITY channels are emitting the raw register data from all diodes for more intense user-space computations. - Sensor has GAIN values that can be adjusted from 1x to 4096x. - Sensor has adjustible measurement times of 5, 55, 100, 200 and 400 mS. Driver does not support 5 mS which has special limitations. - Driver exposes standard 'scale' adjustment which is implemented by: 1) Trying to adjust only the GAIN 2) If GAIN adjustment alone can't provide requested scale, adjusting both the time and the gain is attempted. - Driver exposes writable INT_TIME property that can be used for adjusting the measurement time. Time adjustment will also cause the driver to try to adjust the GAIN so that the overall scale is kept as close to the original as possible. Signed-off-by:
-
Matti Vaittinen authored
ROHM BU27034 is an ambient light sesnor with 3 channels and 3 photo diodes capable of detecting a very wide range of illuminance. Typical application is adjusting LCD and backlight power of TVs and mobile phones. Add dt-bindings. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/66a222574176ee2adbfccf6d9a591c04571a18d9.1680263956.git.mazziesaccount@gmail.comSigned-off-by:
-
Matti Vaittinen authored
Add myself as a maintainer for IIO light sensor helpers (helpers for maintaining the scale while adjusting intergration time or gain) and related Kunit tests. Signed-off-by:
-
Matti Vaittinen authored
Some light sensors can adjust both the HW-gain and integration time. There are cases where adjusting the integration time has similar impact to the scale of the reported values as gain setting has. IIO users do typically expect to handle scale by a single writable 'scale' entry. Driver should then adjust the gain/time accordingly. It however is difficult for a driver to know whether it should change gain or integration time to meet the requested scale. Usually it is preferred to have longer integration time which usually improves accuracy, but there may be use-cases where long measurement times can be an issue. Thus it can be preferable to allow also changing the integration time - but mitigate the scale impact by also changing the gain underneath. Eg, if integration time change doubles the measured values, the driver can reduce the HW-gain to half. The theory of the computations of gain-time-scale is simple. However, some people (undersigned) got that implemented wrong for more than once. Add some gain-time-scale helpers in order to not dublicate errors in all drivers needing these computations. Signed-off-by:
-
Matti Vaittinen authored
A few IIC channel descriptions explained used units as: data is in foo "that can be processed into an" [unit] value. The "can be processed into" is quite broad statement as it does not really explain what this processing means. This makes units pretty much useless. After discussion with Jonathan, it seems the units for these channels should also be well-defined as for all other channels. The processing means the standard scale and offset application that is used throughout the IIO. Let's make it more obvious by stating that the units are [unit] after scale ane offset are applied. Signed-off-by:
-
Tom Rix authored
smatch reports drivers/iio/dac/max5522.c:55:28: warning: symbol 'max5522_channels' was not declared. Should it be static? This variable is only used in one file so it should be static. Signed-off-by:
Tom Rix <trix@redhat.com> Reviewed-by:
Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20230404013828.1914523-1-trix@redhat.comSigned-off-by:
-
Rob Herring authored
The 'adi,custom-thermocouple' property is signed based on the example and driver, so it's type should be int64-matrix rather than uint64-matrix. Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230404205014.644336-2-robh@kernel.orgSigned-off-by:
-
Rob Herring authored
The child node schemas are missing 'unevaluatedProperties' constraints, so any unknown properties are allowed. The current structure with multiple patternProperties schemas doesn't work for unevaluatedProperties as each sub-schema is evaluated independently. To fix this, move the sub-schema for all child nodes to a $defs entry and reference it from each named child node. Signed-off-by:
-
William Breathitt Gray authored
ADC sample captures take a certain amount of time to complete after initiated; this conversion time range can be anywhere from 5 microseconds to 53.68 seconds depending on the configuration of the Analog Input Frame Timer register. When the conversion is in progress, the ADC Status register CNV bit is high. Call regmap_read_poll_timeout() to poll until the ADC conversion is completed (or timeout if more than 53.68 seconds passes). Suggested-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
William Breathitt Gray <william.gray@linaro.org> Link: https://lore.kernel.org/r/9ef433f107afd1d4dcd2d97ef0e932d7045c2bbd.1680790580.git.william.gray@linaro.orgSigned-off-by:
-
William Breathitt Gray authored
The regmap API supports IO port accessors so we can take advantage of regmap abstractions rather than handling access to the device registers directly in the driver. In addition, to improve code organization in stx104_probe(), the devm_iio_device_register() call is moved above GPIO configuration in order to keep relevant code closer together. Suggested-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
William Breathitt Gray authored
By bailing out early if chan->output is false for the IIO_CHAN_INFO_RAW, indentation can be decreased by a tab and code readability improved. Suggested-by:
-
William Breathitt Gray authored
The DAC register is 16 bits wide, so the value passed by write_raw() should be checked against that limit. Rather than hardcoding the 16-bit maximum value limit, use a define to improve readability and make the intention of the code clearer. The explicit cast is also avoided by instead explicitly checking for negative values. Suggested-by:
-
William Breathitt Gray authored
The ADC conversion procedure requires several device I/O operations performed in a particular sequence. If stx104_read_raw() is called concurrently, the ADC conversion procedure could be clobbered. Prevent such a race condition by utilizing a mutex. Fixes: 4075a283 ("iio: stx104: Add IIO support for the ADC channels") Signed-off-by:
-
William Breathitt Gray authored
The priv->chan_out_states array and actual DAC value can become mismatched if stx104_write_raw() is called concurrently. Prevent such a race condition by utilizing a mutex. Fixes: 97a445da ("iio: Add IIO support for the DAC on the Apex Embedded Systems STX104") Signed-off-by:
-
Linus Walleij authored
The description oddly contains a copy of the initial paragraph. Let's not repeat ourselves. Suggested-by:
Diederik de Haas <didi.debian@cknow.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Acked-by:
-
Nuno Sá authored
As stated in the device datasheet [1], bits a0 and a1 have to be set to 1 for the configuration mode. [1]: https://www.analog.com/media/en/technical-documentation/data-sheets/ad2s1210.pdf Fixes: b19e9ad5 ("staging:iio:resolver:ad2s1210 general driver cleanup") Signed-off-by:
-
Dan Carpenter authored
This code has a copy and paste bug so it accidentally returns "PTR_ERR(data->reg_vdd)" which is a valid pointer cast to int. It should return "ret" instead. Fixes: 54188054 ("iio: adc: Add TI ADS1100 and ADS1000") Signed-off-by:
Dan Carpenter <error27@gmail.com> Link: https://lore.kernel.org/r/36fa2aeb-f392-4793-8b38-ae15514033c8@kili.mountainSigned-off-by:
-
Greg Kroah-Hartman authored
We need it here to apply other char/misc driver changes to. Signed-off-by:Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 09 Apr, 2023 1 commit
-
-
Linus Torvalds authored
-
