The following case will lead to slot overwritten.

N1                               N2
mount ocfs2 volume, find and
allocate slot 0, then set
osb->slot_num to 0, begin to
write slot info to disk
                                 mount ocfs2 volume, wait for super lock
write block fail because of
storage link down, unlock
super lock
                                 got super lock and also allocate slot 0
                                 then unlock super lock

mount fail and then dismount,
since osb->slot_num is 0, try to
put invalid slot to disk. And it
will succeed if storage link
restores.
                                 N2 slot info is now overwritten

Once another node say N3 mount, it will find and allocate slot 0 again,
which will lead to mount hung because journal has already been locked by
N2.  so when write slot info failed, invalidate slot in advance to avoid
overwrite slot.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Yiwen Jiang <jiangyiwen@huawei.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dlm_grab() may return NULL when the node is doing unmount.  When doing
code review, we found that some dlm handlers may return error to caller
when dlm_grab() returns NULL and make caller BUG or other problems.
Here is an example:

Node 1                                 Node 2
receives migration message
from node 3, and send
migrate request to others
                                     start unmounting

                                     receives migrate request
                                     from node 1 and call
                                     dlm_migrate_request_handler()

                                     unmount thread unregisters
                                     domain handlers and removes
                                     dlm_context from dlm_domains

                                     dlm_migrate_request_handlers()
                                     returns -EINVAL to node 1
Exit migration neither clearing the
migration state nor sending
assert master message to node 3 which
cause node 3 hung.
Signed-off-by: Jiufei Xue <xuejiufei@huawei.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Reviewed-by: Yiwen Jiang <jiangyiwen@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Since iput will take care the NULL check itself, NULL check before
calling it is redundant.  So clean them up.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit f3f85464 ("ocfs2_dlm: Ensure correct ordering of set/clear
refmap bit on lockres") still exists a race which can't ensure the
ordering is exactly correct.

Node1               Node2                    Node3
umount, migrate
lockres to Node2
                    migrate finished,
                    send migrate request
                    to Node3
                                              received migrate request,
                                              create a migration_mle,
                                              respond to Node2.
                    set DLM_LOCK_RES_SETREF_INPROG
                    and send assert master to
                    Node3
                                              delete migration_mle in
                                              assert_master_handler,
                                              Node3 umount without response
                                              dlm_thread purge
                                              this lockres, send drop
                                              deref message to Node2
                    found the flag of
                    DLM_LOCK_RES_SETREF_INPROG
                    is set, dispatch
                    dlm_deref_lockres_worker to
                    clear refmap, but in function of
                    dlm_deref_lockres_worker,
                    only if node in refmap it wait
                    DLM_LOCK_RES_SETREF_INPROG
                    to be cleared. So worker is
                    done successfully

                                              purge lockres, send
                                              assert master response
                                              to Node1, and finish umount
                    set Node3 in refmap, and it
                    won't be cleared forever, thus
                    lead to umount hung

so wait until DLM_LOCK_RES_SETREF_INPROG is cleared in
dlm_deref_lockres_worker.
Signed-off-by: Yiwen Jiang <jiangyiwen@huawei.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The ocfs2_extent_tree_operations structures are never modified, so
declare them as const.

Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We found a race between purge and migration when doing code review.
Node A put lockres to purgelist before receiving the migrate message
from node B which is the master.  Node A call dlm_mig_lockres_handler to
handle this message.

dlm_mig_lockres_handler
  dlm_lookup_lockres
  >>>>>> race window, dlm_run_purge_list may run and send
         deref message to master, waiting the response
  spin_lock(&res->spinlock);
  res->state |= DLM_LOCK_RES_MIGRATING;
  spin_unlock(&res->spinlock);
  dlm_mig_lockres_handler returns

  >>>>>> dlm_thread receives the response from master for the deref
  message and triggers the BUG because the lockres has the state
  DLM_LOCK_RES_MIGRATING with the following message:

dlm_purge_lockres:209 ERROR: 6633EB681FA7474A9C280A4E1A836F0F: res
M0000000000000000030c0300000000 in use after deref
Signed-off-by: Jiufei Xue <xuejiufei@huawei.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Reviewed-by: Yiwen Jiang <jiangyiwen@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When run multiple xattr test of ocfs2-test on a three-nodes cluster,
mount failed sometimes with the following message.

  o2hb: Unable to stabilize heartbeart on region D18B775E758D4D80837E8CF3D086AD4A (xvdb)

Stabilize heartbeat depends on the timing order to mount ocfs2 from
cluster nodes and how fast the tcp connections are established.  So
increase unsteady interations to leave more time for it.
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Some versions of tar assume that files with st_blocks == 0 do not
contain any data and will skip reading them entirely.  See also commit
9206c561 ("ext4: return non-zero st_blocks for inline data").
Signed-off-by: John Haxby <john.haxby@oracle.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Acked-by: Gang He <ghe@suse.com>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In ocfs2_parse_options,

a) it's better to declare variables(small size) outside of while loop;

b) 'option' will be set by match_int, 'option = 0;' makes no sense, if
   match_int failed, it just goto bail and return.
Signed-off-by: Norton.Zhu <norton.zhu@huawei.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Gang He <ghe@suse.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Acked-by: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix build errors that happen when CONFIG_LOGFS=y and CONFIG_MTD=m:

  fs/built-in.o: In function `logfs_mount':
  super.c:(.text+0x92a6f): undefined reference to `logfs_get_sb_mtd'
  fs/built-in.o: In function `logfs_get_sb_bdev':
  (.text+0x93530): undefined reference to `logfs_get_sb_mtd'

This patch avoids the error by changing the dependencies of logfs in a
way that we can no longer configure logfs as built-in when the MTD core
is a loadable module, while leaving the dependency to require at least
one of MTD or BLOCK to be enabled.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Peter Chen <peter.chen@freescale.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Joern Engel <joern@logfs.org>
Cc: Prasad Joshi <prasadjoshi.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit ac551828 ("modpost: i2c aliases need no trailing wildcard")
removed the wildcard at the end of the I2C module aliases because I2C
devices have no IDs so the aliases are just arbitrary device names.

This is also true for OF modaliases since a compatible string is used to
define a specific IP hardware block.  So the modalias should match a
specific compatible string and not attempt to match a compatible string
whose name matches the beginning of another one.

For example, the following driver module:

  $ modinfo cros_ec_keyb | grep alias
  alias:          platform:cros-ec-keyb
  alias:          of:N*T*Cgoogle,cros-ec-keyb*

will be tried to be loaded for an alias of:N*T*Cgoogle,cros-ec-keyb-v2
but there could be a different driver that supports the device for that
compatible string so it's better to remove the trailing wildcard for OF.

Also, remove the word "always" from the add_wildcard() function comment
since that was carried from the time where a wildcard was always added
at the end of the module alias for all the devices.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Suggested-by: Brian Norris <computersforpeace@gmail.com>
Reviewed-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

At the time that this code was originally written, call_srcu didn't
exist, so this thread was required to ensure that we waited for that
SRCU grace period to settle before finally freeing the object.

It does exist now however and we can much more efficiently use call_srcu
to handle this.  That also allows us to potentially use srcu_barrier to
ensure that they are all of the callbacks have run before proceeding.
In order to conserve space, we union the rcu_head with the g_list.

This will be necessary for nfsd which will allocate marks from a
dedicated slabcache.  We have to be able to ensure that all of the
objects are destroyed before destroying the cache.  That's fairly
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Cc: Eric Paris <eparis@parisplace.org>
Reviewed-by: Jan Kara <jack@suse.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

To make the intention clearer, use list_next_entry instead of
list_entry.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In Python3+ print is a function so the old syntax is not correct
anymore:

  $ ./scripts/bloat-o-meter vmlinux.o vmlinux.o.old
    File "./scripts/bloat-o-meter", line 61
      print "add/remove: %s/%s grow/shrink: %s/%s up/down: %s/%s (%s)" % \
                                                                     ^
  SyntaxError: invalid syntax

Fix by calling print as a function.

Tested on python 2.7.11, 3.5.1
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In include/asm-generic/sections.h:

  /*
   * Usage guidelines:
   * _text, _data: architecture specific, don't use them in
   * arch-independent code
   * [_stext, _etext]: contains .text.* sections, may also contain
   * .rodata.*
   *                   and/or .init.* sections

_text is not guaranteed across architectures.  Architectures such as ARM
may reuse parts which are not actually text and erroneously trigger a bug.
Switch to using _stext which is guaranteed to contain text sections.

Came out of https://lkml.kernel.org/g/<567B1176.4000106@redhat.com>
Signed-off-by: Laura Abbott <labbott@fedoraproject.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The build of m32104ut_defconfig for m32r arch was failing for long long
time with the error:

  ERROR: "memory_start" [fs/udf/udf.ko] undefined!
  ERROR: "memory_end" [fs/udf/udf.ko] undefined!
  ERROR: "memory_end" [drivers/scsi/sg.ko] undefined!
  ERROR: "memory_start" [drivers/scsi/sg.ko] undefined!
  ERROR: "memory_end" [drivers/i2c/i2c-dev.ko] undefined!
  ERROR: "memory_start" [drivers/i2c/i2c-dev.ko] undefined!

As done in other architectures export the symbols to fix the error.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull xfs updates from Dave Chinner:
 "There's not a lot in this - the main addition is the CRC validation of
  the entire region of the log that the will be recovered, along with
  several log recovery fixes.  Most of the rest is small bug fixes and
  cleanups.

  I have three bug fixes still pending, all that address recently fixed
  regressions that I will send to next week after they've had some time
  in for-next.

  Summary:
   - extensive CRC validation during log recovery
   - several log recovery bug fixes
   - Various DAX support fixes
   - AGFL size calculation fix
   - various cleanups in preparation for new functionality
   - project quota ENOSPC notification via netlink
   - tracing and debug improvements"

* tag 'xfs-for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (26 commits)
  xfs: handle dquot buffer readahead in log recovery correctly
  xfs: inode recovery readahead can race with inode buffer creation
  xfs: eliminate committed arg from xfs_bmap_finish
  xfs: bmapbt checking on debug kernels too expensive
  xfs: add tracepoints to readpage calls
  xfs: debug mode log record crc error injection
  xfs: detect and trim torn writes during log recovery
  xfs: fix recursive splice read locking with DAX
  xfs: Don't use reserved blocks for data blocks with DAX
  XFS: Use a signed return type for suffix_kstrtoint()
  libxfs: refactor short btree block verification
  libxfs: pack the agfl header structure so XFS_AGFL_SIZE is correct
  libxfs: use a convenience variable instead of open-coding the fork
  xfs: fix log ticket type printing
  libxfs: make xfs_alloc_fix_freelist non-static
  xfs: make xfs_buf_ioend_async() static
  xfs: send warning of project quota to userspace via netlink
  xfs: get mp from bma->ip in xfs_bmap code
  xfs: print name of verifier if it fails
  libxfs: Optimize the loop for xfs_bitmap_empty
  ...

Pull f2fs updates from Jaegeuk Kim:
 "This series adds two ioctls to control cached data and fragmented
  files.  Most of the rest fixes missing error cases and bugs that we
  have not covered so far.  Summary:

  Enhancements:
   - support an ioctl to execute online file defragmentation
   - support an ioctl to flush cached data
   - speed up shrinking of extent_cache entries
   - handle broken superblock
   - refector dirty inode management infra
   - revisit f2fs_map_blocks to handle more cases
   - reduce global lock coverage
   - add detecting user's idle time

  Major bug fixes:
   - fix data race condition on cached nat entries
   - fix error cases of volatile and atomic writes"

* tag 'for-f2fs-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (87 commits)
  f2fs: should unset atomic flag after successful commit
  f2fs: fix wrong memory condition check
  f2fs: monitor the number of background checkpoint
  f2fs: detect idle time depending on user behavior
  f2fs: introduce time and interval facility
  f2fs: skip releasing nodes in chindless extent tree
  f2fs: use atomic type for node count in extent tree
  f2fs: recognize encrypted data in f2fs_fiemap
  f2fs: clean up f2fs_balance_fs
  f2fs: remove redundant calls
  f2fs: avoid unnecessary f2fs_balance_fs calls
  f2fs: check the page status filled from disk
  f2fs: introduce __get_node_page to reuse common code
  f2fs: check node id earily when readaheading node page
  f2fs: read isize while holding i_mutex in fiemap
  Revert "f2fs: check the node block address of newly allocated nid"
  f2fs: cover more area with nat_tree_lock
  f2fs: introduce max_file_blocks in sbi
  f2fs crypto: check CONFIG_F2FS_FS_XATTR for encrypted symlink
  f2fs: introduce zombie list for fast shrinking extent trees
  ...

Pull first round of SCSI updates from James Bottomley:
 "This includes driver updates from the usual suspects (bfa, arcmsr,
  scsi_dh_alua, lpfc, storvsc, cxlflash).

  The major change is the addition of the hisi_sas driver, which is an
  ARM platform device for SAS.  The other change of note is an enormous
  style transformation to the atp870u driver (which is our worst written
  SCSI driver)"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (169 commits)
  cxlflash: Enable device id for future IBM CXL adapter
  cxlflash: Resolve oops in wait_port_offline
  cxlflash: Fix to resolve cmd leak after host reset
  cxlflash: Removed driver date print
  cxlflash: Fix to avoid virtual LUN failover failure
  cxlflash: Fix to escalate LINK_RESET also on port 1
  storvsc: Tighten up the interrupt path
  storvsc: Refactor the code in storvsc_channel_init()
  storvsc: Properly support Fibre Channel devices
  storvsc: Fix a bug in the layout of the hv_fc_wwn_packet
  mvsas: Add SGPIO support to Marvell 94xx
  mpt3sas: A correction in unmap_resources
  hpsa: Add box and bay information for enclosure devices
  hpsa: Change SAS transport devices to bus 0.
  hpsa: fix path_info_show
  cciss: print max outstanding commands as a hex value
  scsi_debug: Increase the reported optimal transfer length
  lpfc: Update version to 11.0.0.10 for upstream patch set
  lpfc: Use kzalloc instead of kmalloc
  lpfc: Delete unnecessary checks before the function call "mempool_destroy"
  ...

Pull libnvdimm updates from Dan Williams:
 "The bulk of this has appeared in -next and independently received a
  build success notification from the kbuild robot.  The 'for-4.5/block-
  dax' topic branch was rebased over the weekend to drop the "block
  device end-of-life" rework that Al would like to see re-implemented
  with a notifier, and to address bug reports against the badblocks
  integration.

  There is pending feedback against "libnvdimm: Add a poison list and
  export badblocks" received last week.  Linda identified some localized
  fixups that we will handle incrementally.

  Summary:

   - Media error handling: The 'badblocks' implementation that
     originated in md-raid is up-levelled to a generic capability of a
     block device.  This initial implementation is limited to being
     consulted in the pmem block-i/o path.  Later, 'badblocks' will be
     consulted when creating dax mappings.

   - Raw block device dax: For virtualization and other cases that want
     large contiguous mappings of persistent memory, add the capability
     to dax-mmap a block device directly.

   - Increased /dev/mem restrictions: Add an option to treat all
     io-memory as IORESOURCE_EXCLUSIVE, i.e. disable /dev/mem access
     while a driver is actively using an address range.  This behavior
     is controlled via the new CONFIG_IO_STRICT_DEVMEM option and can be
     overridden by the existing "iomem=relaxed" kernel command line
     option.

   - Miscellaneous fixes include a 'pfn'-device huge page alignment fix,
     block device shutdown crash fix, and other small libnvdimm fixes"

* tag 'libnvdimm-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (32 commits)
  block: kill disk_{check|set|clear|alloc}_badblocks
  libnvdimm, pmem: nvdimm_read_bytes() badblocks support
  pmem, dax: disable dax in the presence of bad blocks
  pmem: fail io-requests to known bad blocks
  libnvdimm: convert to statically allocated badblocks
  libnvdimm: don't fail init for full badblocks list
  block, badblocks: introduce devm_init_badblocks
  block: clarify badblocks lifetime
  badblocks: rename badblocks_free to badblocks_exit
  libnvdimm, pmem: move definition of nvdimm_namespace_add_poison to nd.h
  libnvdimm: Add a poison list and export badblocks
  nfit_test: Enable DSMs for all test NFITs
  md: convert to use the generic badblocks code
  block: Add badblock management for gendisks
  badblocks: Add core badblock management code
  block: fix del_gendisk() vs blkdev_ioctl crash
  block: enable dax for raw block devices
  block: introduce bdev_file_inode()
  restrict /dev/mem to idle io memory ranges
  arch: consolidate CONFIG_STRICT_DEVM in lib/Kconfig.debug
  ...

Pull s390 updates from Martin Schwidefsky:
 "Among the traditional bug fixes and cleanups are some improvements:

   - A tool to generated the facility lists, generating the bit fields
     by hand has been a source of bugs in the past

   - The spinlock loop is reordered to avoid bursts of hypervisor calls

   - Add support for the open-for-business interface to the service
     element

   - The get_cpu call is added to the vdso

   - A set of tracepoints is defined for the common I/O layer

   - The deprecated sclp_cpi module is removed

   - Update default configuration"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (56 commits)
  s390/sclp: fix possible control register corruption
  s390: fix normalization bug in exception table sorting
  s390/configs: update default configurations
  s390/vdso: optimize getcpu system call
  s390: drop smp_mb in vdso_init
  s390: rename struct _lowcore to struct lowcore
  s390/mem_detect: use unsigned longs
  s390/ptrace: get rid of long longs in psw_bits
  s390/sysinfo: add missing SYSIB 1.2.2 multithreading fields
  s390: get rid of CONFIG_SCHED_MC and CONFIG_SCHED_BOOK
  s390/Kconfig: remove pointless 64 bit dependencies
  s390/dasd: fix failfast for disconnected devices
  s390/con3270: testing return kzalloc retval
  s390/hmcdrv: constify hmcdrv_ftp_ops structs
  s390/cio: add NULL test
  s390/cio: Change I/O instructions from inline to normal functions
  s390/cio: Introduce common I/O layer tracepoints
  s390/cio: Consolidate inline assemblies and related data definitions
  s390/cio: Fix incorrect xsch opcode specification
  s390/cio: Remove unused inline assemblies
  ...

Pull ia64 build fixes from Tony Luck:
 "The ARM guys broke the ia64 build ...  but gave me fixes, so it's all
  good now"

* tag 'please-pull-fixefi' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  efi: include asm/early_ioremap.h not asm/efi.h to get early_memremap
  ia64: split off early_ioremap() declarations into asm/early_ioremap.h

Pull second batch of media updates from Mauro Carvalho Chehab:
 "This is the second part of the media patches.  It contains the media
  controller next generation patches, with is the result of one year of
  discussions and development.  It also contains patches to enable media
  controller support at the DVB subsystem.

  The goal is to improve the media controller to allow proper support
  for other types of Video4Linux devices (radio and TV ones) and to
  extend the media controller functionality to allow it to be used by
  other subsystems like DVB, ALSA and IIO.

  In order to use the new functionality, a new ioctl is needed
  (MEDIA_IOC_G_TOPOLOGY).  As we're still discussing how to pack the
  struct fields of this ioctl in order to avoid compat32 issues, I
  decided to add a patch at the end of this series commenting out the
  new ioctl, in order to postpone the addition of the new ioctl to the
  next Kernel version (4.6).

  With that, no userspace visible changes should happen at the media
  controller API, as the existing ioctls are untouched.  Yet, it helps
  DVB, ALSA and IIO developers to develop and test the patches adding
  media controller support there, as the core will contain all required
  internal changes to allow adding support for devices that belong to
  those subsystems"

* tag 'media/v4.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (177 commits)
  [media] Postpone the addition of MEDIA_IOC_G_TOPOLOGY
  [media] mxl111sf: Add a tuner entity
  [media] dvbdev: create links on devices with multiple frontends
  [media] media-entitiy: add a function to create multiple links
  [media] dvb-usb-v2: postpone removal of media_device
  [media] dvbdev: Add RF connector if needed
  [media] dvbdev: remove two dead functions if !CONFIG_MEDIA_CONTROLLER_DVB
  [media] call media_device_init() before registering the V4L2 device
  [media] uapi/media.h: Use u32 for the number of graph objects
  [media] media-entity: don't sleep at media_device_register_entity()
  [media] media-entity: increase max number of PADs
  [media] media-entity.h: document the remaining functions
  [media] media-device.h: use just one u32 counter for object ID
  [media] media-entity.h fix documentation for several parameters
  [media] DocBook: document media_entity_graph_walk_cleanup()
  [media] move documentation to the header files
  [media] media: Move MEDIA_ENTITY_MAX_PADS from media-entity.h to media-entity.c
  [media] media: Remove pre-allocated entity enumeration bitmap
  [media] staging: v4l: davinci_vpbe: Use the new media graph walk interface
  [media] staging: v4l: omap4iss: Use the new media graph walk interface
  ...

Pull spi updates from Mark Brown:
 "A quiet release for SPI, not even many driver updates:

   - Add a dummy loopback driver for use in exercising framework
     features during development.

   - Move the test utilities to tools/ and add support for transferring
     data to and from a file instead of stdin and stdout to spidev_test.

   - Support for Mediatek MT2701 and Renesas AG5 deices"

* tag 'spi-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (69 commits)
  spi: loopback: fix typo in MODULE_PARM_DESC
  spi: sun4i: Prevent chip-select from being activated twice before a transfer
  spi: loopback-test: spi_check_rx_ranges can get always done
  spi: loopback-test: rename method spi_test_fill_tx to spi_test_fill_pattern
  spi: loopback-test: write rx pattern also when running without tx_buf
  spi: fsl-espi: expose maximum transfer size limit
  spi: expose master transfer size limitation.
  spi: zynq: use to_platform_device()
  spi: cadence: use to_platform_device()
  spi: mediatek: Add spi support for mt2701 IC
  spi: mediatek: merge all identical compat to mtk_common_compat
  spi: mtk: Add bindings for mediatek MT2701 soc platform
  spi: mediatek: Prevent overflows in FIFO transfers
  spi: s3c64xx: Remove unused platform_device_id entries
  spi: use to_spi_device
  spi: dw: Use SPI_TMOD_TR rather than magic const 0 to set tmode
  spi: imx: defer spi initialization, if DMA engine is
  spi: imx: return error from dma channel request
  spi: imx: enable loopback only for ECSPI controller family
  spi: imx: fix loopback mode setup after controller reset
  ...

Pull MTD updates from Brian Norris:
 "Generic MTD:

   - populate the MTD device 'of_node' field (and get a proper 'of_node'
     symlink in sysfs)

     This yielded some new helper functions, and changes across a
     variety of drivers

   - partitioning cleanups, to prepare for better device-tree based
     partitioning in the future

     Eliminate a lot of boilerplate for drivers that want to use
     OF-based partition parsing

     The DT bindings for this didn't settle yet, so most non-cleanup
     portions are deferred for a future release

  NAND:

   - embed a struct mtd_info inside struct nand_chip

     This is really long overdue; too many drivers have to do the same
     silly boilerplate to allocate and link up two "independent"
     structs, when in fact, everyone is assuming there is an exact 1:1
     relationship between a NAND chips struct and its underlying MTD.
     This aids improved helpers and should make certain abstractions
     easier in the future.

     Also causes a lot of churn, helped along by some automated code
     transformations

   - add more core support for detecting (and "correcting") bitflips in
     erased pages; requires opt-in by drivers, but at least we kill a
     few bad implementations and hopefully stave off future ones

   - pxa3xx_nand: cleanups, a few fixes, and PM improvements

   - new JZ4780 NAND driver

  SPI NOR:

   - provide default erase function, for controllers that just want to
     send the SECTOR_ERASE command directly

   - fix some module auto-loading issues with device tree
     ("jedec,spi-nor")

   - error handling fixes

   - new Mediatek QSPI flash driver

  Other:

   - cfi: force valid geometry Kconfig (finally!)

     This one used to trip up randconfigs occasionally, since bots
     aren't deterred by big scary "advanced configuration" menus

  More? Probably. See the commit logs"

* tag 'for-linus-20160112' of git://git.infradead.org/linux-mtd: (168 commits)
  mtd: jz4780_nand: replace if/else blocks with switch/case
  mtd: nand: jz4780: Update ecc correction error codes
  mtd: nandsim: use nand_get_controller_data()
  mtd: jz4780_nand: remove useless mtd->priv = chip assignment
  staging: mt29f_spinand: make use of nand_set/get_controller_data() helpers
  mtd: nand: make use of nand_set/get_controller_data() helpers
  ARM: make use of nand_set/get_controller_data() helpers
  mtd: nand: add helpers to access ->priv
  mtd: nand: jz4780: driver for NAND devices on JZ4780 SoCs
  mtd: nand: jz4740: remove custom 'erased check' implementation
  mtd: nand: diskonchip: remove custom 'erased check' implementation
  mtd: nand: davinci: remove custom 'erased check' implementation
  mtd: nand: use nand_check_erased_ecc_chunk in default ECC read functions
  mtd: nand: return consistent error codes in ecc.correct() implementations
  doc: dt: mtd: new binding for jz4780-{nand,bch}
  mtd: cfi_cmdset_0001: fixing memory leak and handling failed kmalloc
  mtd: spi-nor: wait until lock/unlock operations are ready
  mtd: tests: consolidate kmalloc/memset 0 call to kzalloc
  jffs2: use to_delayed_work
  mtd: nand: assign reasonable default name for NAND drivers
  ...

Pull ipmi updates from Corey Minyard:
 "Some minor changes that have been in linux-next for a while"

* tag 'for-linus-4.5' of git://git.code.sf.net/p/openipmi/linux-ipmi:
  ipmi: Remove unnecessary pci_disable_device.
  char: ipmi: Drop owner assignment from i2c_driver
  ipmi: constify some struct and char arrays

Pull input updates from Dmitry Torokhov:
 - new driver for eGalaxTouch serial touchscreen
 - new driver for TS-4800 touchscreen
 - an update for Goodix touchscreen driver
 - PS/2 mouse module was reworked to limit number of protocols we try on
   pass-through ports to speed up their detection time
 - wacom_w8001 touchscreen driver now reports pen and touch via separate
   instances of input devices
 - other driver changes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (42 commits)
  Input: elantech - mark protocols v2 and v3 as semi-mt
  Input: wacom_w8001 - drop use of ABS_MT_TOOL_TYPE
  Input: gpio-keys - fix check for disabling unsupported keys
  Input: omap-keypad - remove dead check
  Input: ti_am335x_tsc - fix HWPEN interrupt handling
  Input: omap-keypad - set tasklet data earlier
  Input: rohm_bu21023 - fix handling of retrying firmware update
  Input: ALPS - report v3 pinnacle trackstick device only if is present
  Input: ALPS - detect trackstick presence for v7 protocol
  Input: pcap_ts - use to_delayed_work
  Input: bma150 - constify bma150_cfg structure
  Input: i8042 - add Fujitsu Lifebook U745 to the nomux list
  Input: egalax_ts_serial - fix potential NULL dereference on error
  Input: uinput - sanity check on ff_effects_max and EV_FF
  Input: uinput - rework ABS validation
  Input: uinput - add new UINPUT_DEV_SETUP and UI_ABS_SETUP ioctl
  Input: goodix - use "inverted_[xy]" flags instead of "rotated_screen"
  Input: goodix - add axis swapping and axis inversion support
  Input: goodix - use goodix_i2c_write_u8 instead of i2c_master_send
  Input: goodix - add power management support
  ...

Pull dmaengine updates from Vinod Koul:
 "This round we have few new features, new driver and updates to few
  drivers.

  The new features to dmaengine core are:
   - Synchronized transfer termination API to terminate the dmaengine
     transfers in synchronized and async fashion as required by users.
     We have its user now in ALSA dmaengine lib, img, at_xdma, axi_dmac
     drivers.
   - Universal API for channel request and start consolidation of
     request flows.  It's user is ompa-dma driver.
   - Introduce reuse of descriptors and use in pxa_dma driver

  Add/Remove:
   - New STM32 DMA driver
   - Removal of unused R-Car HPB-DMAC driver

  Updates:
   - ti-dma-crossbar updates for supporting eDMA
   - tegra-apb pm updates
   - idma64
   - mv_xor updates
   - ste_dma updates"

* tag 'dmaengine-4.5-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (54 commits)
  dmaengine: mv_xor: add suspend/resume support
  dmaengine: mv_xor: de-duplicate mv_chan_set_mode*()
  dmaengine: mv_xor: remove mv_xor_chan->current_type field
  dmaengine: omap-dma: Add support for DMA filter mapping to slave devices
  dmaengine: edma: Add support for DMA filter mapping to slave devices
  dmaengine: core: Introduce new, universal API to request a channel
  dmaengine: core: Move and merge the code paths using private_candidate
  dmaengine: core: Skip mask matching when it is not provided to private_candidate
  dmaengine: mdc: Correct terminate_all handling
  dmaengine: edma: Add probe callback to edma_tptc_driver
  dmaengine: dw: fix potential memory leak in dw_dma_parse_dt()
  dmaengine: stm32-dma: Fix unchecked deference of chan->desc
  dmaengine: sh: Remove unused R-Car HPB-DMAC driver
  dmaengine: usb-dmac: Document SoC specific compatibility strings
  ste_dma40: Delete an unnecessary variable initialisation in d40_probe()
  ste_dma40: Delete another unnecessary check in d40_probe()
  ste_dma40: Delete an unnecessary check before the function call "kmem_cache_destroy"
  dmaengine: tegra-apb: Free interrupts before killing tasklets
  dmaengine: tegra-apb: Update driver to use GFP_NOWAIT
  dmaengine: tegra-apb: Only save channel state for those in use
  ...

The code in efi.c uses early_memremap(), but relies on a transitive
include rather than including asm/early_ioremap.h directly, since
this header did not exist on ia64.

Commit f7d92489 ("arm64/efi: refactor EFI init and runtime code
for reuse by 32-bit ARM") attempted to work around this by including
asm/efi.h, which transitively includes asm/early_ioremap.h on most
architectures. However, since asm/efi.h does not exist on ia64 either,
this is not much of an improvement.

Now that we have created an asm/early_ioremap.h for ia64, we can just
include it directly.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>

Unlike x86, arm64 and ARM, ia64 does not declare its implementations
of early_ioremap/early_iounmap/early_memremap/early_memunmap in a header
file called <asm/early_ioremap.h>

This complicates the use of these functions in generic code, since the
header cannot be included directly, and we have to rely on transitive
includes, which is fragile.

So create a <asm/early_ioremap.h> for ia64, and move the existing
definitions into it.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>

Pull char/misc updates from Greg KH:
 "Here's the big set of char/misc patches for 4.5-rc1.

  Nothing major, lots of different driver subsystem updates, full
  details in the shortlog.  All of these have been in linux-next for a
  while"

* tag 'char-misc-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (71 commits)
  mei: fix fasync return value on error
  parport: avoid assignment in if
  parport: remove unneeded space
  parport: change style of NULL comparison
  parport: remove unnecessary out of memory message
  parport: remove braces
  parport: quoted strings should not be split
  parport: code indent should use tabs
  parport: fix coding style
  parport: EXPORT_SYMBOL should follow function
  parport: remove trailing white space
  parport: fix a trivial typo
  coresight: Fix a typo in Kconfig
  coresight: checking for NULL string in coresight_name_match()
  Drivers: hv: vmbus: Treat Fibre Channel devices as performance critical
  Drivers: hv: utils: fix hvt_op_poll() return value on transport destroy
  Drivers: hv: vmbus: fix the building warning with hyperv-keyboard
  extcon: add Maxim MAX3355 driver
  Drivers: hv: ring_buffer: eliminate hv_ringbuffer_peek()
  Drivers: hv: remove code duplication between vmbus_recvpacket()/vmbus_recvpacket_raw()
  ...

Pull staging driver updates from Greg KH:
 "Here is the big staging driver pull request for 4.5-rc1.

  Lots of cleanups and fixes here, not as many as some releases, but
  800+ isn't that bad.  Full details in the shortlog.  All of these have
  been in linux-next for a while"

* tag 'staging-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (843 commits)
  Revert "arm64: dts: Add dts files to enable ION on Hi6220 SoC."
  staging: gdm724x: constify tty_port_operations structs
  staging: gdm72xx: add userspace data struct
  staging: gdm72xx: Replace timeval with ktime_t
  iio: adc: ina2xx: Fix incorrect report of data endianness to userspace.
  iio: light: us5182d: Refactor read_raw function
  iio: light: us5182d: Add interrupt support and events
  iio: light: us5182d: Fix enable status inconcistency
  iio: Make IIO value formating function globally available.
  staging: emxx_udc: use list_first_entry_or_null()
  staging/emxx_udc: fix 64-bit warnings
  STAGING: COMEDI: Using kernel types in plx9080.h
  STAGING: COMEDI: Added spaces around binary operators in plx9080.h
  STAGING: COMEDI: Fixed format of comments in plx9080.h
  staging: comedi: comedilib.h: Coding style warning fix for block comments
  staging: comedi: s526: add macros for counter control reg values
  staging: comedi: s526: replace counter mode bitfield struct
  staging: comedi: check for more errors for zero-length write
  staging: comedi: simplify returned errors for comedi_write()
  staging: comedi: return error on "write" if no command set up
  ...

Pull tty/serial updates from Greg KH:
 "Here is the big serial/tty driver update for 4.5-rc1.

  Lots of driver updates and some tty core changes.  All of these have
  been in linux-next and the details are in the shortlog"

* tag 'tty-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (127 commits)
  drivers/tty/serial: delete unused MODULE_DEVICE_TABLE from atmel_serial.c
  serial: sh-sci: Remove cpufreq notifier to fix crash/deadlock
  serial: 8250: of: Fix the driver and actually compile the 8250_of
  tty: amba-pl011: use iotype instead of access_32b to track 32-bit I/O
  tty: amba-pl011: fix earlycon register offsets
  serial: sh-sci: Drop the sci_fck clock fallback
  sh: sh7734: Correct SCIF type for BRG
  sh: Remove sci_ick clock alias
  sh: Rename sci_ick and sci_fck clock to fck
  serial: sh-sci: Add support for optional BRG on (H)SCIF
  serial: sh-sci: Add support for optional external (H)SCK input
  serial: sh-sci: Prepare for multiple sampling clock sources
  serial: sh-sci: Correct SCIF type on R-Car for BRG
  serial: sh-sci: Correct SCIF type on RZ/A1H
  serial: sh-sci: Replace struct sci_port_info by type/regtype encoding
  serial: sh-sci: Add BRG register definitions
  serial: sh-sci: Take into account sampling rate for max baud rate
  serial: sh-sci: Merge sci_scbrr_calc() and sci_baud_calc_hscif()
  serial: sh-sci: Avoid calculating the receive margin for HSCIF
  serial: sh-sci: Improve bit rate error calculation for HSCIF
  ...

Pull USB updates from Greg KH:
 "Here is the big USB drivers update for 4.5-rc1.

  Lots of gadget driver updates and fixes, like usual, and a mix of
  other USB driver updates as well.  Full details in the shortlog.  All
  of these have been in linux-next for a while"

* tag 'usb-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (191 commits)
  MAINTAINERS: change my email address
  USB: usbmon: remove assignment from IS_ERR argument
  USB: mxu11x0: drop redundant function name from error messages
  USB: mxu11x0: fix debug-message typos
  USB: mxu11x0: rename usb-serial driver
  USB: mxu11x0: fix modem-control handling on B0-transitions
  USB: mxu11x0: fix memory leak on firmware download
  USB: mxu11x0: fix memory leak in port-probe error path
  USB: serial: add Moxa UPORT 11x0 driver
  USB: cp210x: add ID for ELV Marble Sound Board 1
  usb: chipidea: otg: use usb autosuspend to suspend bus for HNP
  usb: chipidea: host: set host to be null after hcd is freed
  usb: chipidea: removing of_find_property
  usb: chipidea: implement platform shutdown callback
  usb: chipidea: clean up CONFIG_USB_CHIPIDEA_DEBUG reference
  usb: chipidea: delete static debug support
  usb: chipidea: support debugfs without CONFIG_USB_CHIPIDEA_DEBUG
  usb: chipidea: udc: improve error handling on _hardware_enqueue
  usb: chipidea: udc: _ep_queue and _hw_queue cleanup
  usb: dwc3: of-simple: fix build warning on !PM
  ...

Pull oower management and ACPI updates from Rafael Wysocki:
 "As far as the number of commits goes, ACPICA takes the lead this time,
  followed by cpufreq and the device properties framework changes.

  The most significant new feature is the debugfs-based interface to the
  ACPICA's AML debugger added in the previous cycle and a new user space
  tool for accessing it.

  On the cpufreq front, the core is updated to handle governors more
  efficiently, particularly on systems where a single cpufreq policy
  object is shared between multiple CPUs, and there are quite a few
  changes in drivers (intel_pstate, cpufreq-dt etc).

  The device properties framework is updated to handle built-in (ie
  included in the kernel itself) device properties better, among other
  things by adding a fallback mechanism that will allow drivers to
  provide default properties to be used in case the plaform firmware
  doesn't provide the properties expected by them.

  The Operating Performance Points (OPP) framework gets new DT bindings
  and debugfs support.

  A new cpufreq driver for ST platforms is added and the ACPI driver for
  AMD SoCs will now support the APM X-Gene ACPI I2C device.

  The rest is mostly fixes and cleanups all over.

  Specifics:

   - Add a debugfs-based interface for interacting with the ACPICA's AML
     debugger introduced in the previous cycle and a new user space tool
     for that, fix some bugs related to the AML debugger and clean up
     the code in question (Lv Zheng, Dan Carpenter, Colin Ian King,
     Markus Elfring).

   - Update ACPICA to upstream revision 20151218 including a number of
     fixes and cleanups in the ACPICA core (Bob Moore, Lv Zheng, Labbe
     Corentin, Prarit Bhargava, Colin Ian King, David E Box, Rafael
     Wysocki).

     In particular, the previously added erroneous support for the _SUB
     object is dropped, the concatenate operator will support all ACPI
     objects now, the Debug Object handling is improved, the SuperName
     handling of parameters being control methods is fixed, the
     ObjectType operator handling is updated to follow ACPI 5.0A and the
     handling of CondRefOf and RefOf is updated accordingly, module-
     level code will be executed after loading each ACPI table now
     (instead of being run once after all tables containing AML have
     been loaded), the Operation Region handlers management is updated
     to fix some reported problems and a the ACPICA code in the kernel
     is more in line with the upstream now.

   - Update the ACPI backlight driver to provide information on whether
     or not it will generate key-presses for brightness change hotkeys
     and update some platform drivers (dell-wmi, thinkpad_acpi) to use
     that information to avoid sending double key-events to users pace
     for these, add new ACPI backlight quirks (Hans de Goede, Aaron Lu,
     Adrien Schildknecht).

   - Improve the ACPI handling of interrupt GPIOs (Christophe Ricard).

   - Fix the handling of the list of device IDs of device objects found
     in the ACPI namespace and add a helper for checking if there is a
     device object for a given device ID (Lukas Wunner).

   - Change the logic in the ACPI namespace scanning code to create
     struct acpi_device objects for all ACPI device objects found in the
     namespace even if _STA fails for them which helps to avoid device
     enumeration problems on Microsoft Surface 3 (Aaron Lu).

   - Add support for the APM X-Gene ACPI I2C device to the ACPI driver
     for AMD SoCs (Loc Ho).

   - Fix the long-standing issue with the DMA controller on Intel SoCs
     where ACPI tables have no power management support for the DMA
     controller itself, but it can be powered off automatically when the
     last (other) device on the SoC is powered off via ACPI and clean up
     the ACPI driver for Intel SoCs (acpi-lpss) after previous attempts
     to fix that problem (Andy Shevchenko).

   - Assorted ACPI fixes and cleanups (Andy Lutomirski, Colin Ian King,
     Javier Martinez Canillas, Ken Xue, Mathias Krause, Rafael Wysocki,
     Sinan Kaya).

   - Update the device properties framework for better handling of
     built-in properties, add support for built-in properties to the
     platform bus type, update the MFD subsystem's handling of device
     properties and add support for passing default configuration data
     as device properties to the intel-lpss MFD drivers, convert the
     designware I2C driver to use the unified device properties API and
     add a fallback mechanism for using default built-in properties if
     the platform firmware fails to provide the properties as expected
     by drivers (Andy Shevchenko, Mika Westerberg, Heikki Krogerus,
     Andrew Morton).

   - Add new Device Tree bindings to the Operating Performance Points
     (OPP) framework and update the exynos4412 DT binding accordingly,
     introduce debugfs support for the OPP framework (Viresh Kumar,
     Bartlomiej Zolnierkiewicz).

   - Migrate the mt8173 cpufreq driver to the new OPP bindings (Pi-Cheng
     Chen).

   - Update the cpufreq core to make the handling of governors more
     efficient, especially on systems where policy objects are shared
     between multiple CPUs (Viresh Kumar, Rafael Wysocki).

   - Fix cpufreq governor handling on configurations with
     CONFIG_HZ_PERIODIC set (Chen Yu).

   - Clean up the cpufreq core code related to the boost sysfs knob
     support and update the ACPI cpufreq driver accordingly (Rafael
     Wysocki).

   - Add a new cpufreq driver for ST platforms and corresponding Device
     Tree bindings (Lee Jones).

   - Update the intel_pstate driver to allow the P-state selection
     algorithm used by it to depend on the CPU ID of the processor it is
     running on, make it use a special P-state selection algorithm (with
     an IO wait time compensation tweak) on Atom CPUs based on the
     Airmont and Silvermont cores so as to reduce their energy
     consumption and improve intel_pstate documentation (Philippe
     Longepe, Srinivas Pandruvada).

   - Update the cpufreq-dt driver to support registering cooling devices
     that use the (P * V^2 * f) dynamic power draw formula where V is
     the voltage, f is the frequency and P is a constant coefficient
     provided by Device Tree and update the arm_big_little cpufreq
     driver to use that support (Punit Agrawal).

   - Assorted cpufreq driver (cpufreq-dt, qoriq, pcc-cpufreq,
     blackfin-cpufreq) updates (Andrzej Hajda, Hongtao Jia, Jacob
     Tanenbaum, Markus Elfring).

   - cpuidle core tweaks related to polling and measured_us calculation
     (Rik van Riel).

   - Removal of modularity from a few cpuidle drivers (clps711x, ux500,
     exynos) that cannot be built as modules in practice (Paul
     Gortmaker).

   - PM core update to prevent devices from being probed during system
     suspend/resume which is generally problematic and may lead to
     inconsistent behavior (Grygorii Strashko).

   - Assorted updates of the PM core and related code (Julia Lawall,
     Manuel Pégourié-Gonnard, Maruthi Bayyavarapu, Rafael Wysocki, Ulf
     Hansson).

   - PNP bus type updates (Christophe Le Roy, Heiner Kallweit).

   - PCI PM code cleanups (Jarkko Nikula, Julia Lawall).

   - cpupower tool updates (Jacob Tanenbaum, Thomas Renninger)"

* tag 'pm+acpi-4.5-rc1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (177 commits)
  PM / clk: don't leave clocks enabled when driver not bound
  i2c: dw: Add APM X-Gene ACPI I2C device support
  ACPI / APD: Add APM X-Gene ACPI I2C device support
  ACPI / LPSS: change 'does not have' to 'has' in comment
  Revert "dmaengine: dw: platform: provide platform data for Intel"
  dmaengine: dw: return immediately from IRQ when DMA isn't in use
  dmaengine: dw: platform: power on device on shutdown
  ACPI / LPSS: override power state for LPSS DMA device
  PM / OPP: Use snprintf() instead of sprintf()
  Documentation: cpufreq: intel_pstate: enhance documentation
  ACPI, PCI, irq: remove redundant check for null string pointer
  ACPI / video: driver must be registered before checking for keypresses
  cpufreq-dt: fix handling regulator_get_voltage() result
  cpufreq: governor: Fix negative idle_time when configured with CONFIG_HZ_PERIODIC
  PM / sleep: Add support for read-only sysfs attributes
  ACPI: Fix white space in a structure definition
  ACPI / SBS: fix inconsistent indenting inside if statement
  PNP: respect PNP_DRIVER_RES_DO_NOT_CHANGE when detaching
  ACPI / PNP: constify device IDs
  ACPI / PCI: Simplify acpi_penalize_isa_irq()
  ...

Pull tracing updates from Steven Rostedt:
 "Not much new with tracing for this release.  Mostly just clean ups and
  minor fixes.

  Here's what else is new:

   - A new TRACE_EVENT_FN_COND macro, combining both _FN and _COND for
     those that want both.

   - New selftest to test the instance create and delete

   - Better debug output when ftrace fails"

* tag 'trace-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (24 commits)
  ftrace: Fix the race between ftrace and insmod
  ftrace: Add infrastructure for delayed enabling of module functions
  x86: ftrace: Fix the comments for ftrace_modify_code_direct()
  tracing: Fix comment to use tracing_on over tracing_enable
  metag: ftrace: Fix the comments for ftrace_modify_code
  sh: ftrace: Fix the comments for ftrace_modify_code()
  ia64: ftrace: Fix the comments for ftrace_modify_code()
  ftrace: Clean up ftrace_module_init() code
  ftrace: Join functions ftrace_module_init() and ftrace_init_module()
  tracing: Introduce TRACE_EVENT_FN_COND macro
  tracing: Use seq_buf_used() in seq_buf_to_user() instead of len
  bpf: Constify bpf_verifier_ops structure
  ftrace: Have ftrace_ops_get_func() handle RCU and PER_CPU flags too
  ftrace: Remove use of control list and ops
  ftrace: Fix output of enabled_functions for showing tramp
  ftrace: Fix a typo in comment
  ftrace: Show all tramps registered to a record on ftrace_bug()
  ftrace: Add variable ftrace_expected for archs to show expected code
  ftrace: Add new type to distinguish what kind of ftrace_bug()
  tracing: Update cond flag when enabling or disabling a trigger
  ...

Pull cgroup updates from Tejun Heo:

 - cgroup v2 interface is now official.  It's no longer hidden behind a
   devel flag and can be mounted using the new cgroup2 fs type.

   Unfortunately, cpu v2 interface hasn't made it yet due to the
   discussion around in-process hierarchical resource distribution and
   only memory and io controllers can be used on the v2 interface at the
   moment.

 - The existing documentation which has always been a bit of mess is
   relocated under Documentation/cgroup-v1/. Documentation/cgroup-v2.txt
   is added as the authoritative documentation for the v2 interface.

 - Some features are added through for-4.5-ancestor-test branch to
   enable netfilter xt_cgroup match to use cgroup v2 paths.  The actual
   netfilter changes will be merged through the net tree which pulled in
   the said branch.

 - Various cleanups

* 'for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: rename cgroup documentations
  cgroup: fix a typo.
  cgroup: Remove resource_counter.txt in Documentation/cgroup-legacy/00-INDEX.
  cgroup: demote subsystem init messages to KERN_DEBUG
  cgroup: Fix uninitialized variable warning
  cgroup: put controller Kconfig options in meaningful order
  cgroup: clean up the kernel configuration menu nomenclature
  cgroup_pids: fix a typo.
  Subject: cgroup: Fix incomplete dd command in blkio documentation
  cgroup: kill cgrp_ss_priv[CGROUP_CANFORK_COUNT] and friends
  cpuset: Replace all instances of time_t with time64_t
  cgroup: replace unified-hierarchy.txt with a proper cgroup v2 documentation
  cgroup: rename Documentation/cgroups/ to Documentation/cgroup-legacy/
  cgroup: replace __DEVEL__sane_behavior with cgroup2 fs type

Pull networking updates from Davic Miller:

 1) Support busy polling generically, for all NAPI drivers.  From Eric
    Dumazet.

 2) Add byte/packet counter support to nft_ct, from Floriani Westphal.

 3) Add RSS/XPS support to mvneta driver, from Gregory Clement.

 4) Implement IPV6_HDRINCL socket option for raw sockets, from Hannes
    Frederic Sowa.

 5) Add support for T6 adapter to cxgb4 driver, from Hariprasad Shenai.

 6) Add support for VLAN device bridging to mlxsw switch driver, from
    Ido Schimmel.

 7) Add driver for Netronome NFP4000/NFP6000, from Jakub Kicinski.

 8) Provide hwmon interface to mlxsw switch driver, from Jiri Pirko.

 9) Reorganize wireless drivers into per-vendor directories just like we
    do for ethernet drivers.  From Kalle Valo.

10) Provide a way for administrators "destroy" connected sockets via the
    SOCK_DESTROY socket netlink diag operation.  From Lorenzo Colitti.

11) Add support to add/remove multicast routes via netlink, from Nikolay
    Aleksandrov.

12) Make TCP keepalive settings per-namespace, from Nikolay Borisov.

13) Add forwarding and packet duplication facilities to nf_tables, from
    Pablo Neira Ayuso.

14) Dead route support in MPLS, from Roopa Prabhu.

15) TSO support for thunderx chips, from Sunil Goutham.

16) Add driver for IBM's System i/p VNIC protocol, from Thomas Falcon.

17) Rationalize, consolidate, and more completely document the checksum
    offloading facilities in the networking stack.  From Tom Herbert.

18) Support aborting an ongoing scan in mac80211/cfg80211, from
    Vidyullatha Kanchanapally.

19) Use per-bucket spinlock for bpf hash facility, from Tom Leiming.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1375 commits)
  net: bnxt: always return values from _bnxt_get_max_rings
  net: bpf: reject invalid shifts
  phonet: properly unshare skbs in phonet_rcv()
  dwc_eth_qos: Fix dma address for multi-fragment skbs
  phy: remove an unneeded condition
  mdio: remove an unneed condition
  mdio_bus: NULL dereference on allocation error
  net: Fix typo in netdev_intersect_features
  net: freescale: mac-fec: Fix build error from phy_device API change
  net: freescale: ucc_geth: Fix build error from phy_device API change
  bonding: Prevent IPv6 link local address on enslaved devices
  IB/mlx5: Add flow steering support
  net/mlx5_core: Export flow steering API
  net/mlx5_core: Make ipv4/ipv6 location more clear
  net/mlx5_core: Enable flow steering support for the IB driver
  net/mlx5_core: Initialize namespaces only when supported by device
  net/mlx5_core: Set priority attributes
  net/mlx5_core: Connect flow tables
  net/mlx5_core: Introduce modify flow table command
  net/mlx5_core: Managing root flow table
  ...

Pull crypto update from Herbert Xu:
 "Algorithms:
   - Add RSA padding algorithm

  Drivers:
   - Add GCM mode support to atmel
   - Add atmel support for SAMA5D2 devices
   - Add cipher modes to talitos
   - Add rockchip driver for rk3288
   - Add qat support for C3XXX and C62X"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (103 commits)
  crypto: hifn_795x, picoxcell - use ablkcipher_request_cast
  crypto: qat - fix SKU definiftion for c3xxx dev
  crypto: qat - Fix random config build issue
  crypto: ccp - use to_pci_dev and to_platform_device
  crypto: qat - Rename dh895xcc mmp firmware
  crypto: 842 - remove WARN inside printk
  crypto: atmel-aes - add debug facilities to monitor register accesses.
  crypto: atmel-aes - add support to GCM mode
  crypto: atmel-aes - change the DMA threshold
  crypto: atmel-aes - fix the counter overflow in CTR mode
  crypto: atmel-aes - fix atmel-ctr-aes driver for RFC 3686
  crypto: atmel-aes - create sections to regroup functions by usage
  crypto: atmel-aes - fix typo and indentation
  crypto: atmel-aes - use SIZE_IN_WORDS() helper macro
  crypto: atmel-aes - improve performances of data transfer
  crypto: atmel-aes - fix atmel_aes_remove()
  crypto: atmel-aes - remove useless AES_FLAGS_DMA flag
  crypto: atmel-aes - reduce latency of DMA completion
  crypto: atmel-aes - remove unused 'err' member of struct atmel_aes_dev
  crypto: atmel-aes - rework crypto request completion
  ...

Pull UBI/UBIFS updates from Richard Weinberger:
 "This contains three changes - two cleanups and one UBI wear leveling
  improvement by Sebastian Siewior"

* tag 'upstream-4.5-rc1' of git://git.infradead.org/linux-ubifs:
  ubifs: Use XATTR_*_PREFIX_LEN
  UBIFS: add a comment in key.h for unused parameter
  mtd: ubi: wl: avoid erasing a PEB which is empty