- 28 Sep, 2006 30 commits
-
-
Charles Spirakis authored
w83791d: Documentation update The alarm bits and the beep enable bits are in different positions in the hardware. Document the problem and leave it to the user-space code to handle the situation. When this driver is updated to the standardized sysfs alarm/beep methodology, this won't be a problem. This is a documentation only change. Signed-off by: Charles Spirakis <bezaur@gmail.com> Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Jean Delvare authored
hwmon: Add individual alarm files to 4 drivers Add individual sysfs files for all f71805f, lm63, lm83 and lm90 alarm and fault conditions. This is a requirement for the planned chip-independent libsensors. Almost all other hwmon drivers will need the same improvement. Signed-off-by:
-
Jean Delvare authored
hwmon: Make a dozen drivers no more experimental Remove the EXPERIMENTAL tag from a dozen hardware monitoring drivers. They are in the tree for quite a long time, so we would know by now if they were causing trouble. Also make it clearer that the VT8231 is a VIA chip. Signed-off-by:
-
Rudolf Marek authored
k8temp: Add documentation Add promised documentation for the k8temp driver. Signed-off-by:
Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by:
-
Hans de Goede authored
This patch contains rudimentary suspend / resume support for the uguru, this protects the uguru and the driver against suspend / resume cycles, so there is no reason to unload the driver in your suspend / resume scripts. Only include suspend / resume functions when CONFIG_PM is set. Signed-off-by:
Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by:
-
Jean Delvare authored
Let the k8temp driver load automatically. Signed-off-by:
-
Rudolf Marek authored
Add support for the temperature sensor(s) found in AMD K8 CPUs. Signed-off-by:
-
Jean Delvare authored
it87: Copyright update I think my contributions to the it87 driver over the past two years qualify me as a co-author of this driver. Also drop old comments of dubious usefulness. Signed-off-by:
-
Jean Delvare authored
it87: Overwrite broken default limits Some IT8716F chips where seen with unreasonable defaults for low voltage and high temperature limits. Overwrite them with sane defaults so as to not generate meaningless alarms. Signed-off-by:
-
Jean Delvare authored
it87: Add support for the IT8718F The IT8718F is a Super-I/O chip with integrated hardware monitoring functions. It is very similar to the IT8716F, so adding support to the it87 driver was pretty straightforward. The most significant difference is that the IT8718F has up to 8 VID pins, instead of 6 for the older chips. For the IT8718F, the VID value can only be read from Super-I/O space. Userspace support is already in lm_sensors SVN (to be soon released as 2.10.1.) Signed-off-by:
-
Jean Delvare authored
it87: Cleanup set_fan_div We only change one fan clock divider at a time, so there is only one fan min which needs to be saved and restored. Signed-off-by:
-
Jean Delvare authored
it87: in8 has no limit registers Signed-off-by:
-
Jean Delvare authored
it87: Prevent overflow on fan clock divider write The highest possible clock divider for fan1 and fan2 is 128. Signed-off-by:
-
Jean Delvare authored
it87: No sysfs files for disabled fans Only create the fan attributes for enabled fan tachometers. Some motherboards have a nice BIOS which only enables the fan inputs which are wired to a fan header on the board. This makes the configuration easier for the user. Signed-off-by:
-
Jean Delvare authored
it87: Add support for the IT8716F The IT8716F is a Super-I/O chip with integrated hardware monitoring functions. It is very similar to the IT8712F, so adding support to the it87 driver was pretty straightforward. The most significant change here is that the IT8716F has 16-bit fan speed counters, so the user no more needs to tweak the fan clock dividers to get the best readings. Userspace support is already in lm_sensors SVN (to be soon released as 2.10.1.) Thanks to Stian Oksavik, Olivier Nicolas, Prakash Punnoor and Juergen Kilb for testing the early versions of this patch. Thanks also to ITE for providing datasheets and answering my questions. Signed-off-by:
-
Jean Delvare authored
smsc47m1: dev_warn fix We can't use dev_warn on an i2c client before it is attached. Signed-off-by:
-
Dmitry Torokhov authored
HDAPS: handle errors from input_register_device() Signed-off-by:
Dmitry Torokhov <dtor@mail.ru> Signed-off-by:
-
Alexey Dobriyan authored
vid_to_reg() can return -1 and char can be unsigned. Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Rudolf Marek authored
Add documentation for the w83627ehf hardware monitoring driver. Signed-off-by:
-
Rudolf Marek authored
This patch adds long-awaited support for automatic fan modes. Based on the work of Yuan Mu from Winbond, I finished the support with the great help of David Hubbard. Signed-off-by:
Yuan Mu <Ymu@Winbond.com.tw> Signed-off-by:
David Hubbard <david.c.hubbard@gmail.com> Signed-off-by:
-
Martin Schwidefsky authored
Major cleanup of all s390 inline assemblies. They now have a common coding style. Quite a few have been shortened, mainly by using register asm variables. Use of the EX_TABLE macro helps as well. The atomic ops, bit ops and locking inlines new use the Q-constraint if a newer gcc is used. That results in slightly better code. Thanks to Christian Borntraeger for proof reading the changes. Signed-off-by:Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Heiko Carstens authored
Huge s390 assembly files whitespace cleanup. Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Martin Schwidefsky authored
A user space program can read uninitialised kernel memory by appending to a file from a bad address and then reading the result back. The cause is the copy_from_user function that does not clear the remaining bytes of the kernel buffer after it got a fault on the user space address. Signed-off-by: -
Jan Glauber authored
Call init_timer only once fpr tp->timer in tty3270. Signed-off-by:
Jan Glauber <jan.glauber@de.ibm.com> Signed-off-by:
-
Christian Borntraeger authored
Add a kernel config option for the IBM System z9. This will produce faster code on newer compilers using the -march=z9-109 option. Signed-off-by:
Christian Borntraeger <cborntra@de.ibm.com> Signed-off-by:
-
Martin Schwidefsky authored
The clocksource infrastructure introduced with commit ad596171 broke 31 bit s390. The reason is that the do_div() primitive for 31 bit always had a restriction: it could only divide an unsigned 64 bit integer by an unsigned 31 bit integer. The clocksource code now uses do_div() with a base value that has the most significant bit set. The result is that clock->cycle_interval has a funny value which causes the linux time to jump around like mad. The solution is "obvious": implement a proper __div64_32 function for 31 bit s390. Signed-off-by:
-
Christian Borntraeger authored
Signed-off-by:
-
Michael Holzheu authored
sparse complains, if we use bitwise operations on enums. Cast enum to long in order to fix that problem! Signed-off-by:
Michael Holzheu <holzheu@de.ibm.com> Signed-off-by:
-
Gerald Schaefer authored
Don't use static initialization for struct members containing variables because gcc would generate more code and use double space on stack. Signed-off-by:
Gerald Schaefer <geraldsc@de.ibm.com> Signed-off-by:
-
Akinobu Mita authored
Lock for mmap_sem is missing on page fault retry for init task when it fails due to out of memory. Signed-off-by:
Akinobu Mita <mita@miraclelinux.com> Signed-off-by:
-
- 27 Sep, 2006 10 commits
-
-
Linus Torvalds authored
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (48 commits) [PATCH] bonding: update version number [PATCH] git-netdev-all: pc300_tty build fix [PATCH] Make PC300 WAN driver compile again [PATCH] Modularize generic HDLC [PATCH] more s2io __iomem annotations [PATCH] restore __iomem annotations in e1000 [PATCH] 64bit bugs in s2io [PATCH] bonding: Fix primary selection error at enslavement time [PATCH] bonding: Don't mangle LACPDUs [PATCH] bonding: Validate probe replies in ARP monitor [PATCH] bonding: Don't release slaves when master is admin down [PATCH] bonding: Add priv_flag to avoid event mishandling [PATCH] bonding: Handle large hard_header_len [PATCH] bonding: Remove unneeded NULL test [PATCH] bonding: Format fix in seq_printf call [PATCH] bonding: Convert delay value from s16 to int [PATCH] bonding: Allow bonding to enslave a 10 Gig adapter Delete unused drivers/net/gt64240eth.h [PATCH] skge: fiber support [PATCH] fix possible NULL ptr deref in forcedeth ...
-
Linus Torvalds authored
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [libata] Don't use old-EH ->eng_timeout() hook when not needed [libata] sata_mv: fix oops by filling in missing hook [libata] One more s/15/ATA_SECONDARY_IRQ/ substitution [libata] pata_serverworks: fill in ->irq_clear hook [PATCH] pata_serverworks: correct PCI ID in cable detection table [PATCH] libata-sff: use our IRQ defines [PATCH] libata-eh: Remove layering violation and duplication when handling absent ports [PATCH] libata: tighten rules for legacy dependancies [PATCH] libata: refuse to register IRQless ports
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: (129 commits) [PATCH] USB Storage: fix Rio Karma eject support build error USB: Airprime driver improvements to allow full speed EvDO transfers USB: remove OTG build warning USB: EHCI update VIA workaround USB: force root hub resume after power loss USB: ohci_usb can oops on shutdown USB: Dealias -110 code (more complete) USB: Remove unneeded void * casts in core files USB: u132-hcd: host controller driver for ELAN U132 adapter USB: ftdi-elan: client driver for ELAN Uxxx adapters usb serial: support Alcor Micro Corp. USB 2.0 TO RS-232 through pl2303 driver USB: Moschip 7840 USB-Serial Driver USB: add PlayStation 2 Trance Vibrator driver USB: Add ADU support for Ontrak ADU devices aircable: fix printk format warnings Add AIRcable USB Bluetooth Dongle Driver cypress_m8: implement graceful failure handling cypress_m8: improve control endpoint error handling cypress_m8: use usb_fill_int_urb where appropriate cypress_m8: use appropriate URB polling interval ...
-
Andi Kleen authored
The new code does clobber the result early, so make sure to tell gcc to not put it into the same register as a input argument Signed-off-by:
Andi Kleen <ak@suse.de> Cc: Andrew Morton <akpm@osdl.org> Acked-by:
Kyle McMartin <kyle@parisc-linux.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Jay Vosburgh authored
I neglected to properly update the version number in the recent patch series; this sets it to something reasonable. Signed-off-by:
Jay Vosburgh <fubar@us.ibm.com> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Andrew Morton authored
In file included from drivers/net/wan/pc300_tty.c:59: drivers/net/wan/pc300.h:335: error: field 'pppdev' has incomplete type Cc: Krzysztof Halasa <khc@pm.waw.pl> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Andrew Morton authored
In file included from drivers/usb/storage/usb.c:180: drivers/usb/storage/unusual_devs.h:221: error: 'US_PR_KARMA' undeclared here (not in a function) drivers/usb/storage/unusual_devs.h:221: error: 'rio_karma_init' undeclared here (not in a function) Cc: Keith Bennett <keith@mcs.st-and.ac.uk> Acked-by:
Bob Copeland <me@bobcopeland.com> Cc: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by:
-
Andy Gay authored
Adapted from an earlier patch by Greg KH <gregkh@suse.de>. That patch added multiple read urbs and larger transfer buffers to allow data transfers at full EvDO speed. This version includes additional device IDs and fixes a memory leak in the transfer buffer allocation. Some (maybe all?) of the supported devices present multiple bulk endpoints, the additional EPs can be used for control and status functions, This version allocates 3 EPs by default, that can be changed using the 'endpoints' module parameter. Tested with Sierra Wireless EM5625 and MC5720 embedded modules. Device ID (0x0c88, 0x17da) for the Kyocera Wireless KPC650/Passport was added but is not yet tested. From: Andy Gay <andy@andynet.net> Cc: Kevin Lloyd <linux@sierrawireless.com> Signed-off-by: -
David Brownell authored
Somewhere along the line, a variable in a USB-OTG codepath stopped being used; this removes the relevant compiler warning. Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
David Brownell authored
This revamps handling of the hardware "async advance" IRQ, and its watchdog timer. Basically it dis-entangles that important timeout from the others, simplifying the associated state and code to make it more robust. This reportedly improves behavior of EHCI on some systems with VIA chips, and AFAIK won't affect non-VIA hardware. VIA systems need this code to recover from silcon bugs whereby the "async advance" IRQ isn't issued. Signed-off-by:
-
