- 08 Jul, 2010 36 commits
-
-
Maurice Dawson authored
This is a patch to the ni_labpc.c file that fixes up 80 character warnings found by the checkpatch.pl tool Signed-off-by:
Maurice Dawson <mauricedawson2699@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Kulikov Vasiliy authored
Use for_each_pci_dev() to simplify the code. Signed-off-by:
Kulikov Vasiliy <segooon@gmail.com> Signed-off-by:
-
Charles Clément authored
A broadcast address is also a multicast address so simplify test cases where possible. As suggested by Joe Perches. Signed-off-by:
Charles Clément <caratorn@gmail.com> Signed-off-by:
-
Andres More authored
Removed an always defined macro, perhaps used to patch the driver Signed-off-by:
Andres More <more.andres@gmail.com> Signed-off-by:
-
Andres More authored
Removed an always defined macro, perhaps used to patch the driver Signed-off-by:
-
Andres More authored
Removed custom definition not used elsewhere, is_zero_ether_addr() is already provided if required. Signed-off-by:
-
H Hartley Sweeten authored
Now that dt3155_drv.c is not dependent on the global symbol dt3155_fbuffer[], declared in dt3155_isr.c, remove it. This also fixes many of the coding style problems in dt3155_isr.c. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Scott Smedley <ss@aao.gov.au> Signed-off-by:
-
H Hartley Sweeten authored
Remove the remaining global 32-bit and 8-bit i2c registers. Create a local variable of the correct type where they are needed. Signed-off-by:
-
Mike Thomas authored
The "depends on" line was inadvertently omitted from the inaugural patch. Signed-off-by:
Mike Thomas <rmthomas@sciolus.org> Acked-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Gustavo Silva authored
This is a patch to the ioctl.c file that fixes up the following issues: ERROR: that open brace { should be on the previous line x 3 WARNING: please, no space before tabs x 1 ERROR: space required before the open parenthesis '(' x 5 WARNING: braces {} are not necessary for single statement blocks x 2 ERROR: space prohibited after that '!' (ctx:BxW) x 1 WARNING: suspect code indent for conditional statements x 2 ERROR: do not use C99 // comments x 1 WARNING: braces {} are not necessary for any arm of this statement x 4 Signed-off-by:Gustavo Silva <silvagustavo@users.sourceforge.net> Signed-off-by:
-
Pavan Savoy authored
Providing a context which can be passed around the driver, the KIM's platform driver's struct device to be used to dev_set_drvdata and dev_get_drvdata. The ST core's data is passed around using tty's disc_data and in other cases the ST KIM's platform device is exposed from the board-XX.c which adds KIM platform device whose dev is used. Thereby remove the need for the global reference struct kim_data_s *kim_gdata; Signed-off-by:
Pavan Savoy <pavan_savoy@ti.com> Signed-off-by:
-
Pavan Savoy authored
An important TODO was to remove global references in TI-ST driver, thereby providing a context to the driver. This should also serve as a small step in removal of the single device limit. Signed-off-by:
-
Jonathan Cameron authored
Signed-off-by:
Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by:
-
Jonathan Cameron authored
Signed-off-by:
-
Jonathan Cameron authored
Signed-off-by:
-
Jonathan Cameron authored
Signed-off-by:
-
Jonathan Cameron authored
Signed-off-by:
-
Jonathan Cameron authored
Signed-off-by:
-
Jonathan Cameron authored
Signed-off-by:
-
Jonathan Cameron authored
Signed-off-by:
-
Jonathan Cameron authored
Signed-off-by:
-
Jonathan Cameron authored
Signed-off-by:
-
Jonathan Cameron authored
Signed-off-by:
-
Linus Lüssing authored
Right now, there is no easy/intuitive way to find out whether a node might have vanished. This commit adds the time when a node was last seen to the originator table output, so that a common user is able to tell whether a node might have gone without having to wait PURGE_TIMEOUT seconds until that node gets "garbe-collected". It also puts the the versioning information in an extra line, as the first one of this debug output would otherwise get too long. Signed-off-by:
Linus Lüssing <linus.luessing@web.de> Signed-off-by:
Marek Lindner <lindner_marek@yahoo.de> Signed-off-by:
Sven Eckelmann <sven.eckelmann@gmx.de> Signed-off-by:
-
Sven Eckelmann authored
Each general printk which is not informative by itself for a specific batX device were moved to pr_(info|warning|err) as it provides an easy interface which for example resolves the problem to add the prefix "batman-adv: " before each line. All information which is specific to a batX device will be printed using a bat_(info|err|warning) macro to prefix it also with "batman-adv: batX:" in each line. Reported-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Marek Lindner authored
All routing debug messages are saved in a ring buffer that can be read via the debugfs file "log". Note that CONFIG_BATMAN_ADV_DEBUG must be activated to have the debug logs compiled in. Signed-off-by:
-
Sven Eckelmann authored
It is not need to depend on it as procfs support was removed during the transition to sysfs. Signed-off-by:
-
Sven Eckelmann authored
We must use the user supplied information about how the code should be compiled instead of always trying to build it as module. Signed-off-by:
-
Marek Lindner authored
The debugfs files are initialized at load time only but would get deinitialized when the module changed in it deactivate (sleeping) state. As a consequence the debugfs files are not accessible anymore. Signed-off-by:
-
Sven Eckelmann authored
We include different header files indirectly to the same source file. This creates weird compiler errors from time to time. Include guards should prefend that functions/variables/... gets redefined by itself. Signed-off-by:
-
Marek Lindner authored
Signed-off-by:
-
Marek Lindner authored
The new versioning scheme looks like this: * the trunk will simply be named "devel" followed by a revision number * the upcoming release branch will be "maint" followed by a revision number * the releases will carry their respective names (e.g. 2010.0.0) Signed-off-by:
-
Simon Wunderlich authored
It is enough for our timeouts to keep them in seconds instead of miliseconds. With a too high resolution, we might even risk an integer overflow, so this patch should make things more safe. Signed-off-by:
Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by:
-
Marek Lindner authored
Signed-off-by:
-
Linus Lüssing authored
With the current default values, this patch is not critical, as LOCAL_HNA_TIMEOUT is a multiple of 1000 anyway. However, if someone would like to change this #define, the person could have some unexpected rounding issues. Therefore doing the multiplication before the division now. Signed-off-by:
-
Antonio Quartulli authored
Useless but meaningfull patch that converts JavaStyle names into c_style Signed-off-by:
Antonio Quartulli <ordex@ritirata.org> Signed-off-by:
-
- 25 Jun, 2010 4 commits
-
-
H Hartley Sweeten authored
All of the board 32-bit registers and 8-bit i2c registers are either read before writing to them or they are just written to with a new value. There is no reason to keep a 'local' copy of any of them. As a first step to removing them, get rid of all the ones that are not used in the driver. Signed-off-by:
-
H Hartley Sweeten authored
Where used, dereference the global symbol dt3155_status[] as a local pointer. This improves the readability of the code and reduces the overall length of some of the really long lines. Signed-off-by:
-
Randy Dunlap authored
Fix 56 undefined references to snd_*() functions. First 5 are: drivers/built-in.o: In function `solo_g723_exit': (.text+0xa4a4aa): undefined reference to `snd_card_free' drivers/built-in.o: In function `solo_snd_pcm_init': solo6010-g723.c:(.text+0xa4a677): undefined reference to `snd_pcm_new' solo6010-g723.c:(.text+0xa4a6b1): undefined reference to `snd_pcm_set_ops' solo6010-g723.c:(.text+0xa4a74d): undefined reference to `snd_pcm_lib_preallocate_pages_for_all' drivers/built-in.o: In function `solo_g723_init': (.text+0xa4a7f6): undefined reference to `snd_card_create' Signed-off-by:
-
Javier Martinez Canillas authored
The spectra driver doesn't compile with today linux-next The problem is that it tries to use a blk_fs_request macro. Searching for this macro I saw that it used to exist in linux/blkdev.h as #define blk_fs_request(rq) ((rq)->cmd_type == REQ_TYPE_FS) This patch solves the issue eliminating the unnecessary (and now inexistent) wrapper Signed-off-by:
Javier Martinez Canillas <martinez.javier@gmail.com> Acked-by:
-
