- 20 Jan, 2020 2 commits
-
-
Olof Johansson authored
Merge tag 'samsung-defconfig-5.6' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/defconfig Samsung defconfig changes for v5.6 1. Bring back explicitly wanted options which were removed through `make savedefconfig`. savedefconfig removes options selected by other symbol, however developers of this other symbol can remove anytime 'select' statement. 2. Enable NFS v4.1 and v4.2, useful in testing/CI systems. 3. Enable thermal throttling through devfreq framework. * tag 'samsung-defconfig-5.6' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: multi_v7_defconfig: Enable devfreq thermal integration ARM: exynos_defconfig: Enable devfreq thermal integration ARM: multi_v7_defconfig: Enable NFS v4.1 and v4.2 ARM: exynos_defconfig: Enable NFS v4.1 and v4.2 ARM: exynos_defconfig: Bring back explicitly wanted options Link: https://lore.kernel.org/r/20200120180227.9061-1-krzk@kernel.orgSigned-off-by:
Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'at91-5.6-defconfig-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/defconfig AT91 defconfig for 5.6 #2 - Add pit64 and sdhci support for at91_dt * tag 'at91-5.6-defconfig-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: configs: at91: enable MMC_SDHCI_OF_AT91 and MICROCHIP_PIT64B Link: https://lore.kernel.org/r/20200119235223.GA92283@piout.netSigned-off-by:
Olof Johansson <olof@lixom.net>
-
- 19 Jan, 2020 1 commit
-
-
Claudiu Beznea authored
Enable MMC_SDHCI_OF_AT91 and MICROCHIP_PIT64B. These are necessary for SAM9X60. Signed-off-by:
Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1579085987-13976-5-git-send-email-claudiu.beznea@microchip.comSigned-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com>
-
- 18 Jan, 2020 1 commit
-
-
Olof Johansson authored
Merge tag 'arm-soc/for-5.6/defconfig-arm64' of https://github.com/Broadcom/stblinux into arm/defconfig This pull request contains Broadcom ARM64-based SoCs defconfig changes for 5.6, please pull the following: - Nicolas enables the Broadcom GENET controller and Broadcom STB PCIe Root Complex driver as a module for the ARM64 defconfig. The PCIe RC driver will go through the PCIe maintainers pull request for 5.6. * tag 'arm-soc/for-5.6/defconfig-arm64' of https://github.com/Broadcom/stblinux: arm64: defconfig: Enable Broadcom's GENET Ethernet controller arm64: defconfig: Enable Broadcom's STB PCIe controller Link: https://lore.kernel.org/r/20200117222705.25391-1-f.fainelli@gmail.comSigned-off-by:
Olof Johansson <olof@lixom.net>
-
- 17 Jan, 2020 5 commits
-
-
Nicolas Saenz Julienne authored
Currently used on the Raspberry Pi 4 and various Broadcom STB SoCs. Signed-off-by:
Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com>
-
Marek Szyprowski authored
Panfrost driver provides a devfreq driver for the Mali GPU and allows to scale GPU core frequency. Enable support for devfreq thermal integration to enable cooling of GPU thermal zone by reducing GPU core frequency. This fixes following warning during boot on Exynos5422-based Odroid XU4: panfrost 11800000.gpu: [drm:panfrost_devfreq_init] Failed to register cooling device Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org>
-
Marek Szyprowski authored
Panfrost driver provides a devfreq driver for the Mali GPU and allows to scale GPU core frequency. Enable support for devfreq thermal integration to enable cooling of GPU thermal zone by reducing GPU core frequency. This fixes following warning during boot on Exynos5422-based Odroid XU4: panfrost 11800000.gpu: [drm:panfrost_devfreq_init] Failed to register cooling device Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org>
-
Krzysztof Kozlowski authored
NFS is widely used in debugging and Continuous Integration systems, so enable the newest versions of protocol: v4.1 and v4.2. Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org>
-
Krzysztof Kozlowski authored
NFS is widely used in debugging and Continuous Integration systems, so enable the newest versions of protocol: v4.1 and v4.2. Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org>
-
- 16 Jan, 2020 7 commits
-
-
Manivannan Sadhasivam authored
Since the Actions Semi platform has been enabled in defconfig, let's also enable the relevant device drivers there. Link: https://lore.kernel.org/r/20200114084348.25659-3-manivannan.sadhasivam@linaro.orgSigned-off-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'qcom-defconfig-for-5.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig Qualcomm ARM defconfig updates for v5.6 * Enable anx78xx HDMI bridge driver * Enable MSM8974 interconnect provider driver * tag 'qcom-defconfig-for-5.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: ARM: qcom_defconfig: add anx78xx HDMI bridge support ARM: qcom_defconfig: add msm8974 interconnect support Link: https://lore.kernel.org/r/20200113204313.GC3325@yogaSigned-off-by:
Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'qcom-arm64-defconfig-for-5.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig Qualcomm ARM64 defconfig updates for v5.6 * Enable NVMEM and OSM CPUfreq drivers * Enable CPR driver * Enable HFPLL driver * Enable ATH10k SNOC driver * Enable PMIC thermal driver * Enable wakeup controller driver * Enable watchdog driver * Enable PRNG driver * Enable SN65DSI86 DSI to DisplayPort bridge driver * Enable QCA Bluetooth driver * Enable Qualcomm SoCinfo driver * Enable SPI and QSPI drivers * Enable drivers providing remoteproc dependencies * tag 'qcom-arm64-defconfig-for-5.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: defconfig: enable CONFIG_ARM_QCOM_CPUFREQ_NVMEM arm64: defconfig: enable CONFIG_QCOM_CPR arm64: defconfig: Enable HFPLL arm64: defconfig: Enable ATH10K_SNOC arm64: defconfig: Enable QCOM PMIC thermal arm64: defconfig: enable PDC interrupt controller for Qualcomm SDM845 arm64: defconfig: Enable Qualcomm watchdog driver arm64: defconfig: Enable Qualcomm pseudo rng arm64: defconfig: Enable SN65DSI86 display bridge arm64: defconfig: Enable QCA Bluetooth over UART arm64: defconfig: Enable Qualcomm CPUfreq HW driver arm64: defconfig: Enable Qualcomm socinfo driver arm64: defconfig: Enable Qualcomm SPI and QSPI controller arm64: defconfig: Enable Qualcomm remoteproc dependencies Link: https://lore.kernel.org/r/20200113204130.GA3325@yogaSigned-off-by:
Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'at91-5.6-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/defconfig AT91 defconfig for 5.6 - Add sam9x60 to at91_dt_defconfig * tag 'at91-5.6-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: configs: at91: enable config flags for sam9x60 SoC ARM: configs: at91: use savedefconfig Link: https://lore.kernel.org/r/20200113161033.GA1358651@piout.netSigned-off-by:
Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'imx-defconfig-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig i.MX defconfig update for 5.6: - Enable i.MX8MP clock driver in arm64 defconfig. - Enable Crypto CAAM driver support as module in arm64 defconfig. - Enable ILI210X touch driver, USB CDC ACM function, NFS_V4 support and TFP410 DVI bridge driver support in arm32 imx_v6_v7_defconfig. * tag 'imx-defconfig-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: defconfig: Enable CONFIG_CLK_IMX8MP by default arm64: defconfig: Enable CRYPTO_DEV_FSL_CAAM ARM: imx_v6_v7_defconfig: Select the TFP410 driver ARM: imx_v6_v7_defconfig: Enable NFS_V4_1 and NFS_V4_2 support ARM: configs: imx_v6_v7_defconfig: enable USB ACM ARM: imx_v6_v7_defconfig: Enable TOUCHSCREEN_ILI210X Link: https://lore.kernel.org/r/20200113034006.17430-6-shawnguo@kernel.orgSigned-off-by:
Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'tegra-for-5.6-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfig arm64: tegra: Default configuration updates for v5.6-rc1 This enables the USB GPIO connector and Tegra XUDC drivers in the default configuration. * tag 'tegra-for-5.6-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: defconfig: Enable tegra XUDC support Link: https://lore.kernel.org/r/20200111005526.2413959-1-thierry.reding@gmail.comSigned-off-by:
Olof Johansson <olof@lixom.net>
-
Nicolas Saenz Julienne authored
For now mainly used in the Raspberry Pi 4. Signed-off-by:
Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com>
-
- 12 Jan, 2020 1 commit
-
-
Anson Huang authored
Select CONFIG_CLK_IMX8MP by default to support i.MX8MP clock driver. Signed-off-by:
Anson Huang <Anson.Huang@nxp.com> Reviewed-by:
Abel Vesa <abel.vesa@nxp.com> Signed-off-by:
Shawn Guo <shawnguo@kernel.org>
-
- 11 Jan, 2020 1 commit
-
-
Olof Johansson authored
Merge tag 'amlogic-defconfig' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/defconfig arm64: defconfig updates for v5.6 - enable FUSB302 as module * tag 'amlogic-defconfig' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: defconfig: enable FUSB302 as module Link: https://lore.kernel.org/r/7hftgoeaad.fsf@baylibre.comSigned-off-by:
Olof Johansson <olof@lixom.net>
-
- 10 Jan, 2020 3 commits
-
-
Claudiu Beznea authored
Enable config flags for SAM9X60 SoC. This includes SoC flag (CONFIG_SOC_SAM9X60) and IP/board specific flags as follows: - atmel maxtouch - flexcom - XDMA - I2S Multi-channel - mikroelectronica proto board - SAMA5D2's ADC - atmel QSPI - classd Signed-off-by:
Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by:
Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by:
Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Link: https://lore.kernel.org/r/1575035505-6310-10-git-send-email-claudiu.beznea@microchip.comSigned-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com>
-
Claudiu Beznea authored
Use savedefconfig. Signed-off-by:
Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1575035505-6310-9-git-send-email-claudiu.beznea@microchip.comSigned-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com>
-
Nagarjuna Kristam authored
Enable Nvidia XUSB device mode controller driver and USB GPIO Based Connection Detection Driver as module. Signed-off-by:
Nagarjuna Kristam <nkristam@nvidia.com> Signed-off-by:
Thierry Reding <treding@nvidia.com>
-
- 06 Jan, 2020 2 commits
-
-
Olof Johansson authored
Merge tag 'renesas-arm-defconfig-for-v5.6-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig Renesas ARM defconfig updates for v5.6 - Enable support for the display panel on the iwg20d board. * tag 'renesas-arm-defconfig-for-v5.6-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: ARM: shmobile: defconfig: Enable support for panels from EDT ARM: shmobile: defconfig: Restore debugfs support Link: https://lore.kernel.org/r/20200106104857.8361-2-geert+renesas@glider.beSigned-off-by:
Olof Johansson <olof@lixom.net>
-
Linus Walleij authored
This updates the gemini defconfig with Kconfig shuffling and some of the features activated in new upstream drivers and newly supported devices: - Move some symbols around due to Kconfig alterations, this affects CONFIG_PREEMPT, CONFIG_PCI, CONFIG_CMA, CONFIG_BINFMT_MISC, CONFIG_PARTITION_ADVANCED. - Add RedBoot partition parsing, as all the Gemini devices use some RedBoot derivative and store their flash partition tables in this format. - Enable bridge and VLAN filtering: a majority of the Gemini devices have some kind of DSA chip for ethernet bridging/routing. - Enable CONFIG_NET_DSA_REALTEK_SMI as this DSA router chip is found in the Gemini-based products. This makes explicit selection of CONFIG_REALTEK_PHY unnecessary so that goes away. - Enable CONFIG_TUN since Gemini userspace often make use of the TUN interface for network services. - Enable MARVELL_PHY as Marvell PHY connectors are often found in Gemini systems. - Enable basic 802.11 libraries as many Gemini systems have wireless PCI cards. Link: https://lore.kernel.org/r/20200101143520.14218-1-linus.walleij@linaro.orgSigned-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Olof Johansson <olof@lixom.net>
-
- 05 Jan, 2020 3 commits
-
-
Niklas Cassel authored
Enable CONFIG_ARM_QCOM_CPUFREQ_NVMEM. Signed-off-by:
Niklas Cassel <niklas.cassel@linaro.org> Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by:
Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20191129213917.1301110-6-niklas.cassel@linaro.orgSigned-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org>
-
Niklas Cassel authored
Enable CONFIG_QCOM_CPR. Signed-off-by:
Niklas Cassel <niklas.cassel@linaro.org> Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by:
Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20191129213917.1301110-5-niklas.cassel@linaro.orgSigned-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org>
-
Jorge Ramirez-Ortiz authored
The high frequency pll is required on compatible Qualcomm SoCs to support the CPU frequency scaling feature. Co-developed-by:
Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by:
Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by:
Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20191125142511.681149-6-niklas.cassel@linaro.orgSigned-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org>
-
- 23 Dec, 2019 3 commits
-
-
Adam Ford authored
Both the i.MX8MQ and i.MX8M Mini support the CAAM driver, but it is currently not enabled by default. This patch enables this as a module. Signed-off-by:
Adam Ford <aford173@gmail.com> Reviewed-by:
Horia Geantă <horia.geanta@nxp.com> Signed-off-by:
Shawn Guo <shawnguo@kernel.org>
-
Fabio Estevam authored
Some boards like imx51-babbage, imx53-cx9020 and imx6q-utilite-pro have a TFP410 DVI bridge chip. Select its driver by default. Signed-off-by:
Fabio Estevam <festevam@gmail.com> Signed-off-by:
Shawn Guo <shawnguo@kernel.org>
-
Sascha Hauer authored
Enable NFS_V4_1 and NFS_V4_2 to support NFS servers providing that protocol. Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
Shawn Guo <shawnguo@kernel.org>
-
- 21 Dec, 2019 1 commit
-
-
Bjorn Andersson authored
The ath10k snoc is found on the Qualcomm QCS404 and SDM845, so enable the driver for this. Tested-by:
Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Reviewed-by:
Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20191028171837.3907550-1-bjorn.andersson@linaro.orgSigned-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org>
-
- 17 Dec, 2019 1 commit
-
-
Linus Walleij authored
This activates the device tree-based cpufreq driver that Ux500 is using and enables the schedutil and ondemand governors with schedutil as default. This works fine in the setups I have tested. Link: https://lore.kernel.org/r/20191217202648.23206-1-linus.walleij@linaro.org Cc: Stephan Gerhold <stephan@gerhold.net> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Olof Johansson <olof@lixom.net>
-
- 16 Dec, 2019 1 commit
-
-
Jerome Brunet authored
Enable the type C fusb302 driver as module Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Signed-off-by:
Kevin Hilman <khilman@baylibre.com>
-
- 15 Dec, 2019 6 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds authored
Pull rdma fixes from Doug Ledford: "A small collection of -rc fixes. Mostly. One API addition, but that's because we wanted to use it in a fix. There's also a bug fix that is going to render the 5.5 kernel's soft-RoCE driver incompatible with all soft-RoCE versions prior, but it's required to actually implement the protocol according to the RoCE spec and required in order for the soft-RoCE driver to be able to successfully work with actual RoCE hardware. Summary: - Update Steve Wise info - Fix for soft-RoCE crc calculations (will break back compatibility, but only with the soft-RoCE driver, which has had this bug since it was introduced and it is an on-the-wire bug, but will make soft-RoCE fully compatible with real RoCE hardware) - cma init fixup - counters oops fix - fix for mlx4 init/teardown sequence - fix for mkx5 steering rules - introduce a cleanup API, which isn't a fix, but we want to use it in the next fix - fix for mlx5 memory management that uses API in previous patch" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: IB/mlx5: Fix device memory flows IB/core: Introduce rdma_user_mmap_entry_insert_range() API IB/mlx5: Fix steering rule of drop and count IB/mlx4: Follow mirror sequence of device add during device removal RDMA/counter: Prevent auto-binding a QP which are not tracked with res rxe: correctly calculate iCRC for unaligned payloads Update mailmap info for Steve Wise RDMA/cma: add missed unregister_pernet_subsys in init failure
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fixes from Paul Walmsley: "Two minor build fixes: - Fix builds of the ELF loader when built with 'make -j1' (nommu only) - Fix CONFIG_SOC_SIFIVE builds when CONFIG_TTY is disabled (found during randconfig testing)" * tag 'riscv/for-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: only select serial sifive if TTY is enabled riscv: Fix build dependency for loader
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen fixes from Juergen Gross: "Two fixes: one for a resource accounting bug in some configurations and a fix for another patch which went into rc1" * tag 'for-linus-5.5b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/balloon: fix ballooned page accounting without hotplug enabled xen-blkback: prevent premature module unload
-
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linuxLinus Torvalds authored
Pull ksys_mount() and ksys_dup() removal from Dominik Brodowski: "This small series replaces all in-kernel calls to the userspace-focused ksys_mount() and ksys_dup() with calls to kernel-centric functions: For each replacement of ksys_mount() with do_mount(), one needs to verify that the first and third parameter (char *dev_name, char *type) are strings allocated in kernelspace and that the fifth parameter (void *data) is either NULL or refers to a full page (only occurence in init/do_mounts.c::do_mount_root()). The second and fourth parameters (char *dir_name, unsigned long flags) are passed by ksys_mount() to do_mount() unchanged, and therefore do not require particular care. Moreover, instead of pretending to be userspace, the opening of /dev/console as stdin/stdout/stderr can be implemented using in-kernel functions as well. Thereby, ksys_dup() can be removed for good" [ This doesn't get rid of the special "kernel init runs with KERNEL_DS" case, but it at least removes _some_ of the users of "treat kernel pointers as user pointers for our magical init sequence". One day we'll hopefully be rid of it all, and can initialize our init_thread addr_limit to USER_DS. - Linus ] * 'remove-ksys-mount-dup' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux: fs: remove ksys_dup() init: unify opening /dev/console as stdin/stdout/stderr init: use do_mount() instead of ksys_mount() initrd: use do_mount() instead of ksys_mount() devtmpfs: use do_mount() instead of ksys_mount()
-
Linus Torvalds authored
Merge tag 'Wimplicit-fallthrough-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull fall through fix from Gustavo Silva: "Fix compile error on sh by marking expected switch fall-through" * tag 'Wimplicit-fallthrough-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: sh: kgdb: Mark expected switch fall-throughs
-
- 14 Dec, 2019 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "24 fixes, all in drivers. The lion's share (16) are qla2xxx and the rest are iscsi (3), ufs (2), smarpqi, lpfc and libsas" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (24 commits) scsi: iscsi: Avoid potential deadlock in iscsi_if_rx func scsi: iscsi: Fix a potential deadlock in the timeout handler scsi: smartpqi: Update attribute name to `driver_version` scsi: libsas: stop discovering if oob mode is disconnected scsi: ufs: Disable autohibern8 feature in Cadence UFS scsi: iscsi: qla4xxx: fix double free in probe scsi: ufs: Give an unique ID to each ufs-bsg scsi: qla2xxx: Add debug dump of LOGO payload and ELS IOCB scsi: qla2xxx: Ignore PORT UPDATE after N2N PLOGI scsi: qla2xxx: Don't defer relogin unconditonally scsi: qla2xxx: Send Notify ACK after N2N PLOGI scsi: qla2xxx: Configure local loop for N2N target scsi: qla2xxx: Fix PLOGI payload and ELS IOCB dump length scsi: qla2xxx: Don't call qlt_async_event twice scsi: qla2xxx: Allow PLOGI in target mode scsi: qla2xxx: Change discovery state before PLOGI scsi: qla2xxx: Drop superfluous INIT_WORK of del_work scsi: qla2xxx: Initialize free_work before flushing it scsi: qla2xxx: Use explicit LOGO in target mode scsi: qla2xxx: Ignore NULL pointer in tcm_qla2xxx_free_mcmd ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are six small fixes for some reported char/misc driver issues: - fix build warnings with new 'awk' with the raid6 code - four interconnect driver bugfixes - binder fix for reported problem All of these except the binder fix have been in linux-next with no reported issues. The binder fix is "new" but Todd says it is good as he has tested it :)" * tag 'char-misc-5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: binder: fix incorrect calculation for num_valid interconnect: qcom: msm8974: Walk the list safely on node removal interconnect: qcom: qcs404: Walk the list safely on node removal interconnect: qcom: sdm845: Walk the list safely on node removal interconnect: qcom: Fix Kconfig indentation lib: raid6: fix awk build warnings
-