Syzbot reported warning in usb_submit_urb() which is caused by wrong
endpoint type. We should check that in endpoint is actually present to
prevent this warning.

Found pipes are now saved to struct mcba_priv and code uses them
directly instead of making pipes in place.

Fail log:

| usb 5-1: BOGUS urb xfer, pipe 3 != type 1
| WARNING: CPU: 1 PID: 49 at drivers/usb/core/urb.c:502 usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502
| Modules linked in:
| CPU: 1 PID: 49 Comm: kworker/1:2 Not tainted 5.17.0-rc6-syzkaller-00184-g38f80f42 #0
| Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
| Workqueue: usb_hub_wq hub_event
| RIP: 0010:usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502
| ...
| Call Trace:
|  <TASK>
|  mcba_usb_start drivers/net/can/usb/mcba_usb.c:662 [inline]
|  mcba_usb_probe+0x8a3/0xc50 drivers/net/can/usb/mcba_usb.c:858
|  usb_probe_interface+0x315/0x7f0 drivers/usb/core/driver.c:396
|  call_driver_probe drivers/base/dd.c:517 [inline]

Fixes: 51f3baad ("can: mcba_usb: Add support for Microchip CAN BUS Analyzer")
Link: https://lore.kernel.org/all/20220313100903.10868-1-paskripkin@gmail.com
Reported-and-tested-by: syzbot+3bc1dce0cc0052d60fde@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

There is no need to call dev_kfree_skb() when usb_submit_urb() fails
because can_put_echo_skb() deletes original skb and
can_free_echo_skb() deletes the cloned skb.

Fixes: 51f3baad ("can: mcba_usb: Add support for Microchip CAN BUS Analyzer")
Link: https://lore.kernel.org/all/20220311080208.45047-1-hbh25y@gmail.comSigned-off-by: Hangyu Hua <hbh25y@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

There is no need to call dev_kfree_skb() when usb_submit_urb() fails
because can_put_echo_skb() deletes original skb and
can_free_echo_skb() deletes the cloned skb.

Fixes: 0024d8ad ("can: usb_8dev: Add support for USB2CAN interface from 8 devices")
Link: https://lore.kernel.org/all/20220311080614.45229-1-hbh25y@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

There is no need to call dev_kfree_skb() when usb_submit_urb() fails
beacause can_put_echo_skb() deletes the original skb and
can_free_echo_skb() deletes the cloned skb.

Link: https://lore.kernel.org/all/20220228083639.38183-1-hbh25y@gmail.com
Fixes: 702171ad ("ems_usb: Added support for EMS CPC-USB/ARM7 CAN/USB interface")
Cc: stable@vger.kernel.org
Cc: Sebastian Haas <haas@ems-wuensche.com>
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

can_put_echo_skb() will clone skb then free the skb. Move the
can_put_echo_skb() for the m_can version 3.0.x directly before the
start of the xmit in hardware, similar to the 3.1.x branch.

Fixes: 80646733 ("can: m_can: update to support CAN FD features")
Link: https://lore.kernel.org/all/20220317081305.739554-1-mkl@pengutronix.de
Cc: stable@vger.kernel.org
Reported-by: Hangyu Hua <hbh25y@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Clang static analysis reports this issue:

| mcp251xfd-core.c:1813:7: warning: The left operand
|   of '&' is a garbage value
|   FIELD_GET(MCP251XFD_REG_DEVID_ID_MASK, dev_id),
|   ^                                      ~~~~~~

dev_id is set in a successful call to mcp251xfd_register_get_dev_id().
Though the status of calls made by mcp251xfd_register_get_dev_id() are
checked and handled, their status' are not returned. So return err.

Fixes: 55e5b97f ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN")
Link: https://lore.kernel.org/all/20220319153128.2164120-1-trix@redhat.comSigned-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

In commit 42bf50a1 ("can: isotp: support MSG_TRUNC flag when
reading from socket") a new check for recvmsg flags has been
introduced that only checked for the flags that are handled in
isotp_recvmsg() itself.

This accidentally removed the MSG_PEEK feature flag which is processed
later in the call chain in __skb_try_recv_from_queue().

Add MSG_PEEK to the set of valid flags to restore the feature.

Fixes: 42bf50a1 ("can: isotp: support MSG_TRUNC flag when reading from socket")
Link: https://github.com/linux-can/can-utils/issues/347#issuecomment-1079554254
Link: https://lore.kernel.org/all/20220328113611.3691-1-socketcan@hartkopp.netReported-by: Derek Will <derekrobertwill@gmail.com>
Suggested-by: Derek Will <derekrobertwill@gmail.com>
Tested-by: Derek Will <derekrobertwill@gmail.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Fix build errors when BRIDGE=m and SPARX5_SWITCH=y:

riscv64-linux-ld: drivers/net/ethernet/microchip/sparx5/sparx5_switchdev.o: in function `.L305':
sparx5_switchdev.c:(.text+0xdb0): undefined reference to `br_vlan_enabled'
riscv64-linux-ld: drivers/net/ethernet/microchip/sparx5/sparx5_switchdev.o: in function `.L283':
sparx5_switchdev.c:(.text+0xee0): undefined reference to `br_vlan_enabled'

Fixes: 3cfa11ba ("net: sparx5: add the basic sparx5 driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Horatiu Vultur <horatiu.vultur@microchip.com>
Cc: Lars Povlsen <lars.povlsen@microchip.com>
Cc: Steen Hegelund <Steen.Hegelund@microchip.com>
Cc: UNGLinuxDriver@microchip.com
Cc: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20220330012025.29560-1-rdunlap@infradead.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Jason A. Donenfeld says:

====================
wireguard patches for 5.18-rc1

Here's a small set of fixes for the next net push:

1) Pipacs reported a CFI violation in a cleanup routine, which he
   triggered using grsec's RAP. I haven't seen reports of this yet from
   the Android/CFI world yet, but it's only a matter of time there.

2) A small rng cleanup to the self test harness to make it initialize
   faster on 5.18.

3) Wang reported and fixed a skb leak for CONFIG_IPV6=n.

4) After Wang's fix for the direct leak, I investigated how that code
   path even could be hit, and found that the netlink layer still
   handles IPv6 endpoints, when it probably shouldn't.
====================

Link: https://lore.kernel.org/r/20220330013127.426620-1-Jason@zx2c4.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The previous commit fixed a memory leak on the send path in the event
that IPv6 is disabled at compile time, but how did a packet even arrive
there to begin with? It turns out we have previously allowed IPv6
endpoints even when IPv6 support is disabled at compile time. This is
awkward and inconsistent. Instead, let's just ignore all things IPv6,
the same way we do other malformed endpoints, in the case where IPv6 is
disabled.

Fixes: e7096c13 ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

I got a memory leak report:

unreferenced object 0xffff8881191fc040 (size 232):
  comm "kworker/u17:0", pid 23193, jiffies 4295238848 (age 3464.870s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff814c3ef4>] slab_post_alloc_hook+0x84/0x3b0
    [<ffffffff814c8977>] kmem_cache_alloc_node+0x167/0x340
    [<ffffffff832974fb>] __alloc_skb+0x1db/0x200
    [<ffffffff82612b5d>] wg_socket_send_buffer_to_peer+0x3d/0xc0
    [<ffffffff8260e94a>] wg_packet_send_handshake_initiation+0xfa/0x110
    [<ffffffff8260ec81>] wg_packet_handshake_send_worker+0x21/0x30
    [<ffffffff8119c558>] process_one_work+0x2e8/0x770
    [<ffffffff8119ca2a>] worker_thread+0x4a/0x4b0
    [<ffffffff811a88e0>] kthread+0x120/0x160
    [<ffffffff8100242f>] ret_from_fork+0x1f/0x30

In function wg_socket_send_buffer_as_reply_to_skb() or wg_socket_send_
buffer_to_peer(), the semantics of send6() is required to free skb. But
when CONFIG_IPV6 is disable, kfree_skb() is missing. This patch adds it
to fix this bug.
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Fixes: e7096c13 ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The seed_rng() function was written to work across lots of old kernels,
back when WireGuard used a big compatibility layer. Now that things have
evolved, we can vastly simplify this, by just marking the RNG as seeded.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

We make too nuanced use of ptr_ring to entirely move to the skb_array
wrappers, but we at least should avoid the naughty function pointer cast
when cleaning up skbs. Otherwise RAP/CFI will honk at us. This patch
uses the __skb_array_destroy_skb wrapper for the cleanup, rather than
directly providing kfree_skb, which is what other drivers in the same
situation do too.
Reported-by: PaX Team <pageexec@freemail.hu>
Fixes: 886fcee9 ("wireguard: receive: use ring buffer for incoming handshakes")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

On such systems cpumask_of_node() returns NULL, which bitmap
operations are not happy with.

Fixes: c265b569 ("sfc: default config to 1 channel/core in local NUMA node only")
Fixes: 09a99ab1 ("sfc: set affinity hints in local NUMA node only")
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Reviewed-by: Íñigo Huguet <ihuguet@redhat.com>
Link: https://lore.kernel.org/r/164857006953.8140.3265568858101821256.stgit@palantir17.mph.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

nvmem_device_find returns a valid pointer or IS_ERR().
Handle this properly.

Fixes: 0cfcdd1e ("ptp: ocp: add nvmem interface for accessing eeprom")
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Link: https://lore.kernel.org/r/20220329160354.4035-1-jonathan.lemon@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

As the possible failure of the allocation, kzalloc() may return NULL
pointer.
Therefore, it should be better to check the 'sgi' in order to prevent
the dereference of NULL pointer.

Fixes: 23ae3a78 ("net: dsa: felix: add stream gate settings for psfp").
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220329090800.130106-1-zhengyongjun3@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Alexei Starovoitov says:

====================
pull-request: bpf 2022-03-29

We've added 16 non-merge commits during the last 1 day(s) which contain
a total of 24 files changed, 354 insertions(+), 187 deletions(-).

The main changes are:

1) x86 specific bits of fprobe/rethook, from Masami and Peter.

2) ice/xsk fixes, from Maciej and Magnus.

3) Various small fixes, from Andrii, Yonghong, Geliang and others.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  selftests/bpf: Fix clang compilation errors
  ice: xsk: Fix indexing in ice_tx_xsk_pool()
  ice: xsk: Stop Rx processing when ntc catches ntu
  ice: xsk: Eliminate unnecessary loop iteration
  xsk: Do not write NULL in SW ring at allocation failure
  x86,kprobes: Fix optprobe trampoline to generate complete pt_regs
  x86,rethook: Fix arch_rethook_trampoline() to generate a complete pt_regs
  x86,rethook,kprobes: Replace kretprobe with rethook on x86
  kprobes: Use rethook for kretprobe if possible
  bpftool: Fix generated code in codegen_asserts
  selftests/bpf: fix selftest after random: Urandom_read tracepoint removal
  bpf: Fix maximum permitted number of arguments check
  bpf: Sync comments for bpf_get_stack
  fprobe: Fix sparse warning for acccessing __rcu ftrace_hash
  fprobe: Fix smatch type mismatch warning
  bpf/bpftool: Add unprivileged_bpf_disabled check against value of 2
====================

Link: https://lore.kernel.org/r/20220329234924.39053-1-alexei.starovoitov@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

SM8150 has an ethernet controller and it needs a different
configuration, so add a new compatible for this.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
[bhsharma: Massage the commit log]
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Link: https://lore.kernel.org/r/20220325200731.1585554-1-bhupesh.sharma@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

ioctls handled by phy_mii_ioctl() will cause a kernel oops when the
interface is down. Fix it by making sure there is a PHY attached.

Fixes: 735fec99 ("net: lan966x: Implement SIOCSHWTSTAMP and SIOCGHWTSTAMP")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220328220350.3118969-1-michael@walle.ccSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Duoming Zhou says:

====================
Fix UAF bugs caused by ax25_release()

The first patch fixes UAF bugs in ax25_send_control, and
the second patch fixes UAF bugs in ax25 timers.
====================

Link: https://lore.kernel.org/r/cover.1648472006.git.duoming@zju.edu.cnSigned-off-by: Paolo Abeni <pabeni@redhat.com>

There are race conditions that may lead to UAF bugs in
ax25_heartbeat_expiry(), ax25_t1timer_expiry(), ax25_t2timer_expiry(),
ax25_t3timer_expiry() and ax25_idletimer_expiry(), when we call
ax25_release() to deallocate ax25_dev.

One of the UAF bugs caused by ax25_release() is shown below:

      (Thread 1)                    |      (Thread 2)
ax25_dev_device_up() //(1)          |
...                                 | ax25_kill_by_device()
ax25_bind()          //(2)          |
ax25_connect()                      | ...
 ax25_std_establish_data_link()     |
  ax25_start_t1timer()              | ax25_dev_device_down() //(3)
   mod_timer(&ax25->t1timer,..)     |
                                    | ax25_release()
   (wait a time)                    |  ...
                                    |  ax25_dev_put(ax25_dev) //(4)FREE
   ax25_t1timer_expiry()            |
    ax25->ax25_dev->values[..] //USE|  ...
     ...                            |

We increase the refcount of ax25_dev in position (1) and (2), and
decrease the refcount of ax25_dev in position (3) and (4).
The ax25_dev will be freed in position (4) and be used in
ax25_t1timer_expiry().

The fail log is shown below:
==============================================================

[  106.116942] BUG: KASAN: use-after-free in ax25_t1timer_expiry+0x1c/0x60
[  106.116942] Read of size 8 at addr ffff88800bda9028 by task swapper/0/0
[  106.116942] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.17.0-06123-g0905eec574
[  106.116942] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-14
[  106.116942] Call Trace:
...
[  106.116942]  ax25_t1timer_expiry+0x1c/0x60
[  106.116942]  call_timer_fn+0x122/0x3d0
[  106.116942]  __run_timers.part.0+0x3f6/0x520
[  106.116942]  run_timer_softirq+0x4f/0xb0
[  106.116942]  __do_softirq+0x1c2/0x651
...

This patch adds del_timer_sync() in ax25_release(), which could ensure
that all timers stop before we deallocate ax25_dev.
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

There are UAF bugs in ax25_send_control(), when we call ax25_release()
to deallocate ax25_dev. The possible race condition is shown below:

      (Thread 1)              |     (Thread 2)
ax25_dev_device_up() //(1)    |
                              | ax25_kill_by_device()
ax25_bind()          //(2)    |
ax25_connect()                | ...
 ax25->state = AX25_STATE_1   |
 ...                          | ax25_dev_device_down() //(3)

      (Thread 3)
ax25_release()                |
 ax25_dev_put()  //(4) FREE   |
 case AX25_STATE_1:           |
  ax25_send_control()         |
   alloc_skb()       //USE    |

The refcount of ax25_dev increases in position (1) and (2), and
decreases in position (3) and (4). The ax25_dev will be freed
before dereference sites in ax25_send_control().

The following is part of the report:

[  102.297448] BUG: KASAN: use-after-free in ax25_send_control+0x33/0x210
[  102.297448] Read of size 8 at addr ffff888009e6e408 by task ax25_close/602
[  102.297448] Call Trace:
[  102.303751]  ax25_send_control+0x33/0x210
[  102.303751]  ax25_release+0x356/0x450
[  102.305431]  __sock_release+0x6d/0x120
[  102.305431]  sock_close+0xf/0x20
[  102.305431]  __fput+0x11f/0x420
[  102.305431]  task_work_run+0x86/0xd0
[  102.307130]  get_signal+0x1075/0x1220
[  102.308253]  arch_do_signal_or_restart+0x1df/0xc00
[  102.308253]  exit_to_user_mode_prepare+0x150/0x1e0
[  102.308253]  syscall_exit_to_user_mode+0x19/0x50
[  102.308253]  do_syscall_64+0x48/0x90
[  102.308253]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[  102.308253] RIP: 0033:0x405ae7

This patch defers the free operation of ax25_dev and net_device after
all corresponding dereference sites in ax25_release() to avoid UAF.

Fixes: 9fd75b66 ("ax25: Fix refcount leaks caused by ax25_cb_del()")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

IPv6 nd target mask was not getting populated in flow dump.

In the function __ovs_nla_put_key the icmp code mask field was checked
instead of icmp code key field to classify the flow as neighbour discovery.

ufid:bdfbe3e5-60c2-43b0-a5ff-dfcac1c37328, recirc_id(0),dp_hash(0/0),
skb_priority(0/0),in_port(ovs-nm1),skb_mark(0/0),ct_state(0/0),
ct_zone(0/0),ct_mark(0/0),ct_label(0/0),
eth(src=00:00:00:00:00:00/00:00:00:00:00:00,
dst=00:00:00:00:00:00/00:00:00:00:00:00),
eth_type(0x86dd),
ipv6(src=::/::,dst=::/::,label=0/0,proto=58,tclass=0/0,hlimit=0/0,frag=no),
icmpv6(type=135,code=0),
nd(target=2001::2/::,
sll=00:00:00:00:00:00/00:00:00:00:00:00,
tll=00:00:00:00:00:00/00:00:00:00:00:00),
packets:10, bytes:860, used:0.504s, dp:ovs, actions:ovs-nm2

Fixes: e6445719 (openvswitch: Restructure datapath.c and flow.c)
Signed-off-by: Martin Varghese <martin.varghese@nokia.com>
Link: https://lore.kernel.org/r/20220328054148.3057-1-martinvarghesenokia@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

llvm upstream patch ([1]) added to issue warning for code like
  void test() {
    int j = 0;
    for (int i = 0; i < 1000; i++)
            j++;
    return;
  }

This triggered several errors in selftests/bpf build since
compilation flag -Werror is used.
  ...
  test_lpm_map.c:212:15: error: variable 'n_matches' set but not used [-Werror,-Wunused-but-set-variable]
        size_t i, j, n_matches, n_matches_after_delete, n_nodes, n_lookups;
                     ^
  test_lpm_map.c:212:26: error: variable 'n_matches_after_delete' set but not used [-Werror,-Wunused-but-set-variable]
        size_t i, j, n_matches, n_matches_after_delete, n_nodes, n_lookups;
                                ^
  ...
  prog_tests/get_stack_raw_tp.c:32:15: error: variable 'cnt' set but not used [-Werror,-Wunused-but-set-variable]
        static __u64 cnt;
                     ^
  ...

  For test_lpm_map.c, 'n_matches'/'n_matches_after_delete' are changed to be volatile
  in order to silent the warning. I didn't remove these two declarations since
  they are referenced in a commented code which might be used by people in certain
  cases. For get_stack_raw_tp.c, the variable 'cnt' is removed.

  [1] https://reviews.llvm.org/D122271Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220325200304.2915588-1-yhs@fb.com

Maciej Fijalkowski says:

====================

Hello,

yet another fixes for XSK from Magnus and me.

Magnus addresses the fact that xp_alloc() can return NULL, so this needs
to be handled to avoid clearing entries in the SW ring on driver side.
Then he addresses the off-by-one problem in Tx desc cleaning routine for
ice ZC driver.

From my side, I am adding protection to ZC Rx processing loop so that
cleaning of descriptors wouldn't go over already processed entries.
Then I also fix an issue with assigning XSK pool to Tx queues.

This is directed to bpf tree.

Thanks!

Maciej Fijalkowski (2):
  ice: xsk: stop Rx processing when ntc catches ntu
  ice: xsk: fix indexing in ice_tx_xsk_pool()
====================
Acked-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Ice driver tries to always create XDP rings array to be
num_possible_cpus() sized, regardless of user's queue count setting that
can be changed via ethtool -L for example.

Currently, ice_tx_xsk_pool() calculates the qid by decrementing the
ring->q_index by the count of XDP queues, but ring->q_index is set to 'i
+ vsi->alloc_txq'.

When user did ethtool -L $IFACE combined 1, alloc_txq is 1, but
vsi->num_xdp_txq is still num_possible_cpus(). Then, ice_tx_xsk_pool()
will do OOB access and in the final result ring would not get xsk_pool
pointer assigned. Then, each ice_xsk_wakeup() call will fail with error
and it will not be possible to get into NAPI and do the processing from
driver side.

Fix this by decrementing vsi->alloc_txq instead of vsi->num_xdp_txq from
ring-q_index in ice_tx_xsk_pool() so the calculation is reflected to the
setting of ring->q_index.

Fixes: 22bf877e ("ice: introduce XDP_TX fallback path")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220328142123.170157-5-maciej.fijalkowski@intel.com

This can happen with big budget values and some breakage of re-filling
descriptors as we do not clear the entry that ntu is pointing at the end
of ice_alloc_rx_bufs_zc. So if ntc is at ntu then it might be the case
that status_error0 has an old, uncleared value and ntc would go over
with processing which would result in false results.

Break Rx loop when ntc == ntu to avoid broken behavior.

Fixes: 3876ff52 ("ice: xsk: Handle SW XDP ring wrap and bump tail more often")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220328142123.170157-4-maciej.fijalkowski@intel.com

The NIC Tx ring completion routine cleans entries from the ring in
batches. However, it processes one more batch than it is supposed
to. Note that this does not matter from a functionality point of view
since it will not find a set DD bit for the next batch and just exit
the loop. But from a performance perspective, it is faster to
terminate the loop before and not issue an expensive read over PCIe to
get the DD bit.

Fixes: 126cdfe1 ("ice: xsk: Improve AF_XDP ZC Tx and use batching API")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220328142123.170157-3-maciej.fijalkowski@intel.com

For the case when xp_alloc_batch() is used but the batched allocation
cannot be used, there is a slow path that uses the non-batched
xp_alloc(). When it fails to allocate an entry, it returns NULL. The
current code wrote this NULL into the entry of the provided results
array (pointer to the driver SW ring usually) and returned. This might
not be what the driver expects and to make things simpler, just write
successfully allocated xdp_buffs into the SW ring,. The driver might
have information in there that is still important after an allocation
failure.

Note that at this point in time, there are no drivers using
xp_alloc_batch() that could trigger this slow path. But one might get
added.

Fixes: 47e4075d ("xsk: Batched buffer allocation for the pool")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220328142123.170157-2-maciej.fijalkowski@intel.com

Masami Hiramatsu says:

====================
Here are the 3rd version for generic kretprobe and kretprobe on x86 for
replacing the kretprobe trampoline with rethook. The previous version
is here[1]

[1] https://lore.kernel.org/all/164821817332.2373735.12048266953420821089.stgit@devnote2/T/#u

This version fixed typo and build issues for bpf-next and CONFIG_RETHOOK=y
error. I also add temporary mitigation lines for ANNOTATE_NOENDBR macro
issue for bpf-next tree [2/4].

This will be removed after merging kernel IBT series.

Background:

This rethook came from Jiri's request of multiple kprobe for bpf[2].
He tried to solve an issue that starting bpf with multiple kprobe will
take a long time because bpf-kprobe will wait for RCU grace period for
sync rcu events.

Jiri wanted to attach a single bpf handler to multiple kprobes and
he tried to introduce multiple-probe interface to kprobe. So I asked
him to use ftrace and kretprobe-like hook if it is only for the
function entry and exit, instead of adding ad-hoc interface
to kprobes.
For this purpose, I introduced the fprobe (kprobe like interface for
ftrace) with the rethook (this is a generic return hook feature for
fprobe exit handler)[3].

[2] https://lore.kernel.org/all/20220104080943.113249-1-jolsa@kernel.org/T/#u
[3] https://lore.kernel.org/all/164191321766.806991.7930388561276940676.stgit@devnote2/T/#u

The rethook is basically same as the kretprobe trampoline. I just made
it decoupled from kprobes. Eventually, the all arch dependent kretprobe
trampolines will be replaced with the rethook trampoline instead of
cloning and set HAVE_RETHOOK=y.
When I port the rethook for all arch which supports kretprobe, the
legacy kretprobe specific code (which is for CONFIG_KRETPROBE_ON_RETHOOK=n)
will be removed eventually.
====================
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Currently the optprobe trampoline template code ganerate an
almost complete pt_regs on-stack, everything except regs->ss.
The 'regs->ss' points to the top of stack, which is not a
valid segment decriptor.

As same as the rethook does, complete the job by also pushing ss.
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/164826166027.2455864.14759128090648961900.stgit@devnote2

Currently arch_rethook_trampoline() generates an almost complete
pt_regs on-stack, everything except regs->ss that is, that currently
points to the fake return address, which is not a valid segment
descriptor.

Since interpretation of regs->[sb]p should be done in the context of
regs->ss, and we have code actually doing that (see
arch/x86/lib/insn-eval.c for instance), complete the job by also
pushing ss.

This ensures that anybody who does do look at regs->ss doesn't
mysteriously malfunction, avoiding much future pain.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/bpf/164826164851.2455864.17272661073069737350.stgit@devnote2

Replaces the kretprobe code with rethook on x86. With this patch,
kretprobe on x86 uses the rethook instead of kretprobe specific
trampoline code.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/164826163692.2455864.13745421016848209527.stgit@devnote2

Use rethook for kretprobe function return hooking if the arch sets
CONFIG_HAVE_RETHOOK=y. In this case, CONFIG_KRETPROBE_ON_RETHOOK is
set to 'y' automatically, and the kretprobe internal data fields
switches to use rethook. If not, it continues to use kretprobe
specific function return hooks.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/164826162556.2455864.12255833167233452047.stgit@devnote2

Arnaldo reported perf compilation fail with:

  $ make -k BUILD_BPF_SKEL=1 CORESIGHT=1 PYTHON=python3
  ...
  In file included from util/bpf_counter.c:28:
  /tmp/build/perf//util/bpf_skel/bperf_leader.skel.h: In function ‘bperf_leader_bpf__assert’:
  /tmp/build/perf//util/bpf_skel/bperf_leader.skel.h:351:51: error: unused parameter ‘s’ [-Werror=unused-parameter]
    351 | bperf_leader_bpf__assert(struct bperf_leader_bpf *s)
        |                          ~~~~~~~~~~~~~~~~~~~~~~~~~^
  cc1: all warnings being treated as errors

If there's nothing to generate in the new assert function,
we will get unused 's' warn/error, adding 'unused' attribute to it.

Fixes: 08d4dba6 ("bpftool: Bpf skeletons assert type sizes")
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/bpf/20220328083703.2880079-1-jolsa@kernel.org

14c17463 ("random: remove unused tracepoints") removed all the
tracepoints from drivers/char/random.c, one of which,
random:urandom_read, was used by stacktrace_build_id selftest to trigger
stack trace capture.

Fix breakage by switching to kprobing urandom_read() function.
Suggested-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220325225643.2606-1-andrii@kernel.org

Since the m->arg_size array can hold up to MAX_BPF_FUNC_ARGS argument
sizes, it's ok that nargs is equal to MAX_BPF_FUNC_ARGS.
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220324164238.1274915-1-ytcoode@gmail.com

Commit ee2a0988 missed updating the comments for helper bpf_get_stack
in tools/include/uapi/linux/bpf.h. Sync it.

Fixes: ee2a0988 ("bpf: Adjust BPF stack helper functions to accommodate skip > 0")
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/ce54617746b7ed5e9ba3b844e55e74cb8a60e0b5.1648110794.git.geliang.tang@suse.com

Masami Hiramatsu says:

====================

Hi,

These fprobe patches are for fixing the warnings by Smatch and sparse.
This is arch independent part of the fixes.

Thank you,
---
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Since ftrace_ops::local_hash::filter_hash field is an __rcu pointer,
we have to use rcu_access_pointer() to access it.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/164802093635.1732982.4938094876018890866.stgit@devnote2