Using CPUID data can be useful for the processor compatibility
check, but that's it.  Using it to compute guest-reserved bits
can have both false positives (such as LA57 and UMIP which we
are already handling) and false negatives: in particular, with
this patch we don't allow anymore a KVM guest to set CR4.PKE
when CR4.PKE is clear on the host.

Fixes: b9dd21e1 ("KVM: x86: simplify handling of PKRU")
Reported-by: Jim Mattson <jmattson@google.com>
Tested-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Clear CF and ZF in the VM-Exit path after doing __FILL_RETURN_BUFFER so
that KVM doesn't interpret clobbered RFLAGS as a VM-Fail.  Filling the
RSB has always clobbered RFLAGS, its current incarnation just happens
clear CF and ZF in the processs.  Relying on the macro to clear CF and
ZF is extremely fragile, e.g. commit 089dd8e5 ("x86/speculation:
Change FILL_RETURN_BUFFER to work with objtool") tweaks the loop such
that the ZF flag is always set.
Reported-by: Qian Cai <cai@lca.pw>
Cc: Rick Edgecombe <rick.p.edgecombe@intel.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: stable@vger.kernel.org
Fixes: f2fde6a5 ("KVM: VMX: Move RSB stuffing to before the first RET after VM-Exit")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200506035355.2242-1-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

This is a rewrite of this[1] Wiki page with further enhancements.  The
doc also includes a section on debugging problems in nested
environments, among other improvements.

[1] https://www.linux-kvm.org/page/Nested_GuestsSigned-off-by: Kashyap Chamarthy <kchamart@redhat.com>
Message-Id: <20200505112839.30534-1-kchamart@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Commit f458d039 ("kvm: ioapic: Lazy update IOAPIC EOI") introduces
the following infinite loop:

BUG: stack guard page was hit at 000000008f595917 \
(stack is 00000000bdefe5a4..00000000ae2b06f5)
kernel stack overflow (double-fault): 0000 [#1] SMP NOPTI
RIP: 0010:kvm_set_irq+0x51/0x160 [kvm]
Call Trace:
 irqfd_resampler_ack+0x32/0x90 [kvm]
 kvm_notify_acked_irq+0x62/0xd0 [kvm]
 kvm_ioapic_update_eoi_one.isra.0+0x30/0x120 [kvm]
 ioapic_set_irq+0x20e/0x240 [kvm]
 kvm_ioapic_set_irq+0x5c/0x80 [kvm]
 kvm_set_irq+0xbb/0x160 [kvm]
 ? kvm_hv_set_sint+0x20/0x20 [kvm]
 irqfd_resampler_ack+0x32/0x90 [kvm]
 kvm_notify_acked_irq+0x62/0xd0 [kvm]
 kvm_ioapic_update_eoi_one.isra.0+0x30/0x120 [kvm]
 ioapic_set_irq+0x20e/0x240 [kvm]
 kvm_ioapic_set_irq+0x5c/0x80 [kvm]
 kvm_set_irq+0xbb/0x160 [kvm]
 ? kvm_hv_set_sint+0x20/0x20 [kvm]
....

The re-entrancy happens because the irq state is the OR of
the interrupt state and the resamplefd state.  That is, we don't
want to show the state as 0 until we've had a chance to set the
resamplefd.  But if the interrupt has _not_ gone low then
ioapic_set_irq is invoked again, causing an infinite loop.

This can only happen for a level-triggered interrupt, otherwise
irqfd_inject would immediately set the KVM_USERSPACE_IRQ_SOURCE_ID high
and then low.  Fortunately, in the case of level-triggered interrupts the VMEXIT already happens because
TMR is set.  Thus, fix the bug by restricting the lazy invocation
of the ack notifier to edge-triggered interrupts, the only ones that
need it.
Tested-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reported-by: borisvk@bstnet.org
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://www.spinics.net/lists/kvm/msg213512.html
Fixes: f458d039 ("kvm: ioapic: Lazy update IOAPIC EOI")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=207489Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Current logic incorrectly uses the enum ioapic_irq_destination_types
to check the posted interrupt destination types. However, the value was
set using APIC_DM_XXX macros, which are left-shifted by 8 bits.

Fixes by using the APIC_DM_FIXED and APIC_DM_LOWEST instead.

Fixes: (fdcf7562 'KVM: x86: Disable posted interrupts for non-standard IRQs delivery modes')
Cc: Alexander Graf <graf@amazon.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <1586239989-58305-1-git-send-email-suravee.suthikulpanit@amd.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Tested-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Merge tag 'kvmarm-fixes-5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master

KVM/arm fixes for Linux 5.7, take #2

- Fix compilation with Clang
- Correctly initialize GICv4.1 in the absence of a virtual ITS
- Move SP_EL0 save/restore to the guest entry/exit code
- Handle PC wrap around on 32bit guests, and narrow all 32bit
  registers on userspace access

Merge tag 'kvmarm-fixes-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master

KVM/arm fixes for Linux 5.7, take #1

- Prevent the userspace API from interacting directly with the HW
  stage of the virtual GIC
- Fix a couple of vGIC memory leaks
- Tighten the rules around the use of the 32bit PSCI functions
  for 64bit guest, as well as the opposite situation (matches the
  specification)

The corresponding code was added for VMX in commit 42dbaa5a
("KVM: x86: Virtualize debug registers, 2008-12-15) but never for AMD.
Fix this.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Use BUG() in the impossible-to-hit default case when switching on the
scope of INVEPT to squash a warning with clang 11 due to clang treating
the BUG_ON() as conditional.

  >> arch/x86/kvm/vmx/nested.c:5246:3: warning: variable 'roots_to_free'
     is used uninitialized whenever 'if' condition is false
     [-Wsometimes-uninitialized]
                   BUG_ON(1);
Reported-by: kbuild test robot <lkp@intel.com>
Fixes: ce8fe7b7 ("KVM: nVMX: Free only the affected contexts when emulating INVEPT")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200504153506.28898-1-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

In the unlikely event that a 32bit vcpu traps into the hypervisor
on an instruction that is located right at the end of the 32bit
range, the emulation of that instruction is going to increment
PC past the 32bit range. This isn't great, as userspace can then
observe this value and get a bit confused.

Conversly, userspace can do things like (in the context of a 64bit
guest that is capable of 32bit EL0) setting PSTATE to AArch64-EL0,
set PC to a 64bit value, change PSTATE to AArch32-USR, and observe
that PC hasn't been truncated. More confusion.

Fix both by:
- truncating PC increments for 32bit guests
- sanitizing all 32bit regs every time a core reg is changed by
  userspace, and that PSTATE indicates a 32bit mode.

Cc: stable@vger.kernel.org
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>

KVM now expects to be able to use HW-accelerated delivery of vSGIs
as soon as the guest has enabled thm. Unfortunately, we only
initialize the GICv4 context if we have a virtual ITS exposed to
the guest.

Fix it by always initializing the GICv4.1 context if it is
available on the host.

Fixes: 2291ff2f ("KVM: arm64: GICv4.1: Plumb SGI implementation selection in the distributor")
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>

We currently save/restore sp_el0 in C code. This is a bit unsafe,
as a lot of the C code expects 'current' to be accessible from
there (and the opportunity to run kernel code in HYP is specially
great with VHE).

Instead, let's move the save/restore of sp_el0 to the assembly
code (in __guest_enter), making sure that sp_el0 is correct
very early on when we exit the guest, and is preserved as long
as possible to its host value when we enter the guest.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>

SYM_CODE_START defines \label , so it is redundant to define \label again.
A redefinition at the same place is accepted by GNU as
(https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=159fbb6088f17a341bcaaac960623cab881b4981)
but rejected by the clang integrated assembler.

Fixes: 617a2f39 ("arm64: kvm: Annotate assembly using modern annoations")
Signed-off-by: Fangrui Song <maskray@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/988
Link: https://lore.kernel.org/r/20200413231016.250737-1-maskray@google.com

If we're going to fail out the vgic_add_lpi(), let's make sure the
allocated vgic_irq memory is also freed. Though it seems that both
cases are unlikely to fail.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200414030349.625-3-yuzenghui@huawei.com

It's likely that the vcpu fails to handle all virtual interrupts if
userspace decides to destroy it, leaving the pending ones stay in the
ap_list. If the un-handled one is a LPI, its vgic_irq structure will
be eventually leaked because of an extra refcount increment in
vgic_queue_irq_unlock().

This was detected by kmemleak on almost every guest destroy, the
backtrace is as follows:

unreferenced object 0xffff80725aed5500 (size 128):
comm "CPU 5/KVM", pid 40711, jiffies 4298024754 (age 166366.512s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 08 01 a9 73 6d 80 ff ff ...........sm...
c8 61 ee a9 00 20 ff ff 28 1e 55 81 6c 80 ff ff .a... ..(.U.l...
backtrace:
[<000000004bcaa122>] kmem_cache_alloc_trace+0x2dc/0x418
[<0000000069c7dabb>] vgic_add_lpi+0x88/0x418
[<00000000bfefd5c5>] vgic_its_cmd_handle_mapi+0x4dc/0x588
[<00000000cf993975>] vgic_its_process_commands.part.5+0x484/0x1198
[<000000004bd3f8e3>] vgic_its_process_commands+0x50/0x80
[<00000000b9a65b2b>] vgic_mmio_write_its_cwriter+0xac/0x108
[<0000000009641ebb>] dispatch_mmio_write+0xd0/0x188
[<000000008f79d288>] __kvm_io_bus_write+0x134/0x240
[<00000000882f39ac>] kvm_io_bus_write+0xe0/0x150
[<0000000078197602>] io_mem_abort+0x484/0x7b8
[<0000000060954e3c>] kvm_handle_guest_abort+0x4cc/0xa58
[<00000000e0d0cd65>] handle_exit+0x24c/0x770
[<00000000b44a7fad>] kvm_arch_vcpu_ioctl_run+0x460/0x1988
[<0000000025fb897c>] kvm_vcpu_ioctl+0x4f8/0xee0
[<000000003271e317>] do_vfs_ioctl+0x160/0xcd8
[<00000000e7f39607>] ksys_ioctl+0x98/0xd8

Fix it by retiring all pending LPIs in the ap_list on the destroy path.

p.s. I can also reproduce it on a normal guest shutdown. It is because
userspace still send LPIs to vcpu (through KVM_SIGNAL_MSI ioctl) while
the guest is being shutdown and unable to handle it. A little strange
though and haven't dig further...
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
[maz: moved the distributor deallocation down to avoid an UAF splat]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200414030349.625-2-yuzenghui@huawei.com

There is no point in accessing the HW when writing to any of the
ISPENDR/ICPENDR registers from userspace, as only the guest should
be allowed to change the HW state.

Introduce new userspace-specific accessors that deal solely with
the virtual state. Note that the API differs from that of GICv3,
where userspace exclusively uses ISPENDR to set the state. Too
bad we can't reuse it.

Fixes: 82e40f55 ("KVM: arm/arm64: vgic-v2: Handle SGI bits in GICD_I{S,C}PENDR0 as WI")
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>

There is no point in accessing the HW when writing to any of the
ISENABLER/ICENABLER registers from userspace, as only the guest
should be allowed to change the HW state.

Introduce new userspace-specific accessors that deal solely with
the virtual state.
Reported-by: James Morse <james.morse@arm.com>
Tested-by: James Morse <james.morse@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>

When a guest tries to read the active state of its interrupts,
we currently just return whatever state we have in memory. This
means that if such an interrupt lives in a List Register on another
CPU, we fail to obsertve the latest active state for this interrupt.

In order to remedy this, stop all the other vcpus so that they exit
and we can observe the most recent value for the state. This is
similar to what we are doing for the write side of the same
registers, and results in new MMIO handlers for userspace (which
do not need to stop the guest, as it is supposed to be stopped
already).
Reported-by: Julien Grall <julien@xen.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>

Merge tag 'kvm-ppc-fixes-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into kvm-master

PPC KVM fix for 5.7

- Fix a regression introduced in the last merge window, which results
  in guests in HPT mode dying randomly.

Merge tag 'kvm-s390-master-5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvm-master

KVM: s390: Fix for 5.7 and maintainer update

- Silence false positive lockdep warning
- add Claudio as reviewer

Since cd758a9b "KVM: PPC: Book3S HV: Use __gfn_to_pfn_memslot in HPT
page fault handler", it's been possible in fairly rare circumstances to
load a non-present PTE in kvmppc_book3s_hv_page_fault() when running a
guest on a POWER8 host.

Because that case wasn't checked for, we could misinterpret the non-present
PTE as being a cache-inhibited PTE.  That could mismatch with the
corresponding hash PTE, which would cause the function to fail with -EFAULT
a little further down.  That would propagate up to the KVM_RUN ioctl()
generally causing the KVM userspace (usually qemu) to fall over.

This addresses the problem by catching that case and returning to the guest
instead.

For completeness, this fixes the radix page fault handler in the same
way.  For radix this didn't cause any obvious misbehaviour, because we
ended up putting the non-present PTE into the guest's partition-scoped
page tables, leading immediately to another hypervisor data/instruction
storage interrupt, which would go through the page fault path again
and fix things up.

Fixes: cd758a9b "KVM: PPC: Book3S HV: Use __gfn_to_pfn_memslot in HPT page fault handler"
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1820402Reported-by: David Gibson <david@gibson.dropbear.id.au>
Tested-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

Frame pointers are completely broken by vmenter.S because it clobbers
RBP:

  arch/x86/kvm/svm/vmenter.o: warning: objtool: __svm_vcpu_run()+0xe4: BP used as a scratch register

That's unavoidable, so just skip checking that file when frame pointers
are configured in.

On the other hand, ORC can handle that code just fine, so leave objtool
enabled in the !FRAME_POINTER case.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Message-Id: <01fae42917bacad18be8d2cbc771353da6603473.1587398610.git.jpoimboe@redhat.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Fixes: 199cd1d7 ("KVM: SVM: Split svm_vcpu_run inline assembly to separate file")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20200417152936.772256-1-imbrenda@linux.ibm.com

The diag 0x44 handler, which handles a directed yield, goes into a
a codepath that does a kvm_for_each_vcpu() and ultimately
deliverable_irqs().  The new check for kvm_s390_pv_cpu_is_protected()
contains an assertion that the vcpu->mutex is held, which isn't going
to be the case in this scenario.

The result is a plethora of these messages if the lock debugging
is enabled, and thus an implication that we have a problem.

  WARNING: CPU: 9 PID: 16167 at arch/s390/kvm/kvm-s390.h:239 deliverable_irqs+0x1c6/0x1d0 [kvm]
  ...snip...
  Call Trace:
   [<000003ff80429bf2>] deliverable_irqs+0x1ca/0x1d0 [kvm]
  ([<000003ff80429b34>] deliverable_irqs+0x10c/0x1d0 [kvm])
   [<000003ff8042ba82>] kvm_s390_vcpu_has_irq+0x2a/0xa8 [kvm]
   [<000003ff804101e2>] kvm_arch_dy_runnable+0x22/0x38 [kvm]
   [<000003ff80410284>] kvm_vcpu_on_spin+0x8c/0x1d0 [kvm]
   [<000003ff80436888>] kvm_s390_handle_diag+0x3b0/0x768 [kvm]
   [<000003ff80425af4>] kvm_handle_sie_intercept+0x1cc/0xcd0 [kvm]
   [<000003ff80422bb0>] __vcpu_run+0x7b8/0xfd0 [kvm]
   [<000003ff80423de6>] kvm_arch_vcpu_ioctl_run+0xee/0x3e0 [kvm]
   [<000003ff8040ccd8>] kvm_vcpu_ioctl+0x2c8/0x8d0 [kvm]
   [<00000001504ced06>] ksys_ioctl+0xae/0xe8
   [<00000001504cedaa>] __s390x_sys_ioctl+0x2a/0x38
   [<0000000150cb9034>] system_call+0xd8/0x2d8
  2 locks held by CPU 2/KVM/16167:
   #0: 00000001951980c0 (&vcpu->mutex){+.+.}, at: kvm_vcpu_ioctl+0x90/0x8d0 [kvm]
   #1: 000000019599c0f0 (&kvm->srcu){....}, at: __vcpu_run+0x4bc/0xfd0 [kvm]
  Last Breaking-Event-Address:
   [<000003ff80429b34>] deliverable_irqs+0x10c/0x1d0 [kvm]
  irq event stamp: 11967
  hardirqs last  enabled at (11975): [<00000001502992f2>] console_unlock+0x4ca/0x650
  hardirqs last disabled at (11982): [<0000000150298ee8>] console_unlock+0xc0/0x650
  softirqs last  enabled at (7940): [<0000000150cba6ca>] __do_softirq+0x422/0x4d8
  softirqs last disabled at (7929): [<00000001501cd688>] do_softirq_own_stack+0x70/0x80

Considering what's being done here, let's fix this by removing the
mutex assertion rather than acquiring the mutex for every other vcpu.

Fixes: 201ae986 ("KVM: s390: protvirt: Implement interrupt injection")
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Link: https://lore.kernel.org/r/20200415190353.63625-1-farman@linux.ibm.comSigned-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

When remapping a mapping where a portion of a VMA is remapped
into another portion of the VMA it can cause the VMA to become
split. During the copy_vma operation the VMA can actually
be remerged if it's an anonymous VMA whose pages have not yet
been faulted. This isn't normally a problem because at the end
of the remap the original portion is unmapped causing it to
become split again.

However, MREMAP_DONTUNMAP leaves that original portion in place which
means that the VMA which was split and then remerged is not actually
split at the end of the mremap. This patch fixes a bug where
we don't detect that the VMAs got remerged and we end up
putting back VM_ACCOUNT on the next mapping which is completely
unreleated. When that next mapping is unmapped it results in
incorrectly unaccounting for the memory which was never accounted,
and eventually we will underflow on the memory comittment.

There is also another issue which is similar, we're currently
accouting for the number of pages in the new_vma but that's wrong.
We need to account for the length of the remap operation as that's
all that is being added. If there was a mapping already at that
location its comittment would have been adjusted as part of
the munmap at the start of the mremap.

A really simple repro can be seen in:
https://gist.github.com/bgaff/e101ce99da7d9a8c60acc641d07f312c

Fixes: e346b381 ("mm/mremap: add MREMAP_DONTUNMAP to mremap()")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Brian Geffon <bgeffon@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull clk fixes from Stephen Boyd:
 "Two build fixes for a couple clk drivers and a fix for the Unisoc
  serial clk where we want to keep it on for earlycon"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: sprd: don't gate uart console clock
  clk: mmp2: fix link error without mmp2
  clk: asm9260: fix __clk_hw_register_fixed_rate_with_accuracy typo

Pull x86 and objtool fixes from Thomas Gleixner:
 "A set of fixes for x86 and objtool:

  objtool:

   - Ignore the double UD2 which is emitted in BUG() when
     CONFIG_UBSAN_TRAP is enabled.

   - Support clang non-section symbols in objtool ORC dump

   - Fix switch table detection in .text.unlikely

   - Make the BP scratch register warning more robust.

  x86:

   - Increase microcode maximum patch size for AMD to cope with new CPUs
     which have a larger patch size.

   - Fix a crash in the resource control filesystem when the removal of
     the default resource group is attempted.

   - Preserve Code and Data Prioritization enabled state accross CPU
     hotplug.

   - Update split lock cpu matching to use the new X86_MATCH macros.

   - Change the split lock enumeration as Intel finaly decided that the
     IA32_CORE_CAPABILITIES bits are not architectural contrary to what
     the SDM claims. !@#%$^!

   - Add Tremont CPU models to the split lock detection cpu match.

   - Add a missing static attribute to make sparse happy"

* tag 'x86-urgent-2020-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/split_lock: Add Tremont family CPU models
  x86/split_lock: Bits in IA32_CORE_CAPABILITIES are not architectural
  x86/resctrl: Preserve CDP enable over CPU hotplug
  x86/resctrl: Fix invalid attempt at removing the default resource group
  x86/split_lock: Update to use X86_MATCH_INTEL_FAM6_MODEL()
  x86/umip: Make umip_insns static
  x86/microcode/AMD: Increase microcode PATCH_MAX_SIZE
  objtool: Make BP scratch register warning more robust
  objtool: Fix switch table detection in .text.unlikely
  objtool: Support Clang non-section symbols in ORC generation
  objtool: Support Clang non-section symbols in ORC dump
  objtool: Fix CONFIG_UBSAN_TRAP unreachable warnings

Pull time namespace fix from Thomas Gleixner:
 "An update for the proc interface of time namespaces: Use symbolic
  names instead of clockid numbers. The usability nuisance of numbers
  was noticed by Michael when polishing the man page"

* tag 'timers-urgent-2020-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  proc, time/namespace: Show clock symbolic names in /proc/pid/timens_offsets

Pull perf tooling fixes and updates from Thomas Gleixner:

 - Fix the header line of perf stat output for '--metric-only --per-socket'

 - Fix the python build with clang

 - The usual tools UAPI header synchronization

* tag 'perf-urgent-2020-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tools headers: Synchronize linux/bits.h with the kernel sources
  tools headers: Adopt verbatim copy of compiletime_assert() from kernel sources
  tools headers: Update x86's syscall_64.tbl with the kernel sources
  tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
  tools headers UAPI: Update tools's copy of drm.h headers
  tools headers kvm: Sync linux/kvm.h with the kernel sources
  tools headers UAPI: Sync linux/fscrypt.h with the kernel sources
  tools include UAPI: Sync linux/vhost.h with the kernel sources
  tools arch x86: Sync asm/cpufeatures.h with the kernel sources
  tools headers UAPI: Sync linux/mman.h with the kernel
  tools headers UAPI: Sync sched.h with the kernel
  tools headers: Update linux/vdso.h and grab a copy of vdso/const.h
  perf stat: Fix no metric header if --per-socket and --metric-only set
  perf python: Check if clang supports -fno-semantic-interposition
  tools arch x86: Sync the msr-index.h copy with the kernel sources

Pull irq fixes from Thomas Gleixner:
 "A set of fixes/updates for the interrupt subsystem:

   - Remove setup_irq() and remove_irq(). All users have been converted
     so remove them before new users surface.

   - A set of bugfixes for various interrupt chip drivers

   - Add a few missing static attributes to address sparse warnings"

* tag 'irq-urgent-2020-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/irq-bcm7038-l1: Make bcm7038_l1_of_init() static
  irqchip/irq-mvebu-icu: Make legacy_bindings static
  irqchip/meson-gpio: Fix HARDIRQ-safe -> HARDIRQ-unsafe lock order
  irqchip/sifive-plic: Fix maximum priority threshold value
  irqchip/ti-sci-inta: Fix processing of masked irqs
  irqchip/mbigen: Free msi_desc on device teardown
  irqchip/gic-v4.1: Update effective affinity of virtual SGIs
  irqchip/gic-v4.1: Add support for VPENDBASER's Dirty+Valid signaling
  genirq: Remove setup_irq() and remove_irq()

Pull scheduler fixes from Thomas Gleixner:
 "Two fixes for the scheduler:

   - Work around an uninitialized variable warning where GCC can't
     figure it out.

   - Allow 'isolcpus=' to skip unknown subparameters so that older
     kernels work with the commandline of a newer kernel. Improve the
     error output while at it"

* tag 'sched-urgent-2020-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/vtime: Work around an unitialized variable warning
  sched/isolation: Allow "isolcpus=" to skip unknown sub-parameters

Pull RCU fix from Thomas Gleixner:
 "A single bugfix for RCU to prevent taking a lock in NMI context"

* tag 'core-urgent-2020-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  rcu: Don't acquire lock in NMI handler in rcu_nmi_enter_common()

Pull ext4 fixes from Ted Ts'o:
 "Miscellaneous bug fixes and cleanups for ext4, including a fix for
  generic/388 in data=journal mode, removing some BUG_ON's, and cleaning
  up some compiler warnings"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: convert BUG_ON's to WARN_ON's in mballoc.c
  ext4: increase wait time needed before reuse of deleted inode numbers
  ext4: remove set but not used variable 'es' in ext4_jbd2.c
  ext4: remove set but not used variable 'es'
  ext4: do not zeroout extents beyond i_disksize
  ext4: fix return-value types in several function comments
  ext4: use non-movable memory for superblock readahead
  ext4: use matching invalidatepage in ext4_writepage

Pull cifs fixes from Steve French:
 "Three small smb3 fixes: two debug related (helping network tracing for
  SMB2 mounts, and the other removing an unintended debug line on
  signing failures), and one fixing a performance problem with 64K
  pages"

* tag '5.7-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  smb3: remove overly noisy debug line in signing errors
  cifs: improve read performance for page size 64KB & cache=strict & vers=2.1+
  cifs: dump the session id and keys also for SMB2 sessions

Merge tag 'flexible-array-member-5.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux

Pull flexible-array member conversion from Gustavo Silva:
 "The current codebase makes use of the zero-length array language
  extension to the C90 standard, but the preferred mechanism to declare
  variable-length types such as these ones is a flexible array
  member[1][2], introduced in C99:

    struct foo {
        int stuff;
        struct boo array[];
    };

  By making use of the mechanism above, we will get a compiler warning
  in case the flexible array does not occur last in the structure, which
  will help us prevent some kind of undefined behavior bugs from being
  inadvertently introduced[3] to the codebase from now on.

  Also, notice that, dynamic memory allocations won't be affected by
  this change:

   "Flexible array members have incomplete type, and so the sizeof
    operator may not be applied. As a quirk of the original
    implementation of zero-length arrays, sizeof evaluates to zero."[1]

  sizeof(flexible-array-member) triggers a warning because flexible
  array members have incomplete type[1]. There are some instances of
  code in which the sizeof operator is being incorrectly/erroneously
  applied to zero-length arrays and the result is zero. Such instances
  may be hiding some bugs. So, this work (flexible-array member
  convertions) will also help to get completely rid of those sorts of
  issues.

  Notice that all of these patches have been baking in linux-next for
  quite a while now and, 238 more of these patches have already been
  merged into 5.7-rc1.

  There are a couple hundred more of these issues waiting to be
  addressed in the whole codebase"

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour")

* tag 'flexible-array-member-5.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: (28 commits)
  xattr.h: Replace zero-length array with flexible-array member
  uapi: linux: fiemap.h: Replace zero-length array with flexible-array member
  uapi: linux: dlm_device.h: Replace zero-length array with flexible-array member
  tpm_eventlog.h: Replace zero-length array with flexible-array member
  ti_wilink_st.h: Replace zero-length array with flexible-array member
  swap.h: Replace zero-length array with flexible-array member
  skbuff.h: Replace zero-length array with flexible-array member
  sched: topology.h: Replace zero-length array with flexible-array member
  rslib.h: Replace zero-length array with flexible-array member
  rio.h: Replace zero-length array with flexible-array member
  posix_acl.h: Replace zero-length array with flexible-array member
  platform_data: wilco-ec.h: Replace zero-length array with flexible-array member
  memcontrol.h: Replace zero-length array with flexible-array member
  list_lru.h: Replace zero-length array with flexible-array member
  lib: cpu_rmap: Replace zero-length array with flexible-array member
  irq.h: Replace zero-length array with flexible-array member
  ihex.h: Replace zero-length array with flexible-array member
  igmp.h: Replace zero-length array with flexible-array member
  genalloc.h: Replace zero-length array with flexible-array member
  ethtool.h: Replace zero-length array with flexible-array member
  ...

Pull SCSI fixes from James Bottomley:
 "Seven fixes: three in target, one on a sg error leg, two in qla2xxx
  fixing warnings introduced in the last merge window and updating
  MAINTAINERS and one in hisi_sas fixing a problem introduced by libata"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: sg: add sg_remove_request in sg_common_write
  scsi: target: tcmu: reset_ring should reset TCMU_DEV_BIT_BROKEN
  scsi: target: fix PR IN / READ FULL STATUS for FC
  scsi: target: Write NULL to *port_nexus_ptr if no ISID
  scsi: MAINTAINERS: Update qla2xxx FC-SCSI driver maintainer
  scsi: qla2xxx: Fix regression warnings
  scsi: hisi_sas: Fix build error without SATA_HOST

The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:

struct foo {
        int stuff;
        struct boo array[];
};

By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.

Also, notice that, dynamic memory allocations won't be affected by
this change:

"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]

This issue was found with the help of Coccinelle.

[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>